diff options
Diffstat (limited to 'arch')
109 files changed, 574 insertions, 403 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 8629127..837a1f2 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -55,9 +55,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_GPIO - bool - config ZONE_DMA bool default y diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 34ef016..d423d58 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -109,9 +109,6 @@ config MIGHT_HAVE_PCI config SYS_SUPPORTS_APM_EMULATION bool -config GENERIC_GPIO - bool - config HAVE_TCM bool select GENERIC_ALLOCATOR @@ -900,7 +897,6 @@ config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 - select ARCH_VEXPRESS select CPU_V7 config ARCH_MULTI_V6_V7 @@ -1794,6 +1790,7 @@ config XEN depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 + select ARM_PSCI help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8562af4..b9f7121 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -200,8 +200,8 @@ dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ - vexpress-v2p-ca15_a7.dtb \ - xenvm-4.2.dtb + vexpress-v2p-ca15_a7.dtb +dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb \ diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 0a61bbb..3f0239e 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -175,6 +175,14 @@ i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; + + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; }; i2c@12C80000 { diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xenvm-4.2.dts index ec3f952..3369151 100644 --- a/arch/arm/boot/dts/xenvm-4.2.dts +++ b/arch/arm/boot/dts/xenvm-4.2.dts @@ -29,6 +29,19 @@ compatible = "arm,cortex-a15"; reg = <0>; }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + psci { + compatible = "arm,psci"; + method = "hvc"; + cpu_off = <1>; + cpu_on = <2>; }; memory@80000000 { diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 33903ca..c1ef64b 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -137,6 +137,8 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y @@ -153,6 +155,7 @@ CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -195,6 +198,7 @@ CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_OMAP_SOC=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index 8a82325..799f42e 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -46,6 +46,7 @@ int HYPERVISOR_event_channel_op(int cmd, void *arg); unsigned long HYPERVISOR_hvm_op(int op, void *arg); int HYPERVISOR_memory_op(unsigned int cmd, void *arg); int HYPERVISOR_physdev_op(int cmd, void *arg); +int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args); static inline void MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 70f1bde..5af04f6 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -180,6 +180,13 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) unsigned long dt_root; const char *model; +#ifdef CONFIG_ARCH_MULTIPLATFORM + DT_MACHINE_START(GENERIC_DT, "Generic DT based system") + MACHINE_END + + mdesc_best = (struct machine_desc *)&__mach_desc_GENERIC_DT; +#endif + if (!dt_phys) return NULL; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 728007c..1522c7a 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -18,6 +18,7 @@ #include <linux/bootmem.h> #include <linux/seq_file.h> #include <linux/screen_info.h> +#include <linux/of_platform.h> #include <linux/init.h> #include <linux/kexec.h> #include <linux/of_fdt.h> @@ -659,9 +660,19 @@ struct screen_info screen_info = { static int __init customize_machine(void) { - /* customizes platform devices, or adds new ones */ + /* + * customizes platform devices, or adds new ones + * On DT based machines, we fall back to populating the + * machine from the device tree, if no callback is provided, + * otherwise we would always need an init_machine callback. + */ if (machine_desc->init_machine) machine_desc->init_machine(); +#ifdef CONFIG_OF + else + of_platform_populate(NULL, of_default_bus_match_table, + NULL, NULL); +#endif return 0; } arch_initcall(customize_machine); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 78f795d..ba44328 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -5,6 +5,7 @@ config ARCH_MXC select AUTO_ZRELADDR if !ZBOOT_ROM select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MULTI_IRQ_HANDLER @@ -61,10 +62,6 @@ config MXC_ULPI config ARCH_HAS_RNGA bool -config IRAM_ALLOC - bool - select GENERIC_ALLOCATOR - config HAVE_IMX_ANATOP bool diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 9309589..70ae7c4 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o -obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 4cba7db..c08ae3f 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -12,6 +12,7 @@ #define __ASM_ARCH_MXC_COMMON_H__ struct platform_device; +struct pt_regs; struct clk; enum mxc_cpu_pwr_mode; diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index a58c8b0..67b9c48 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -24,7 +24,7 @@ ENTRY(v7_secondary_startup) ENDPROC(v7_secondary_startup) #endif -#ifdef CONFIG_PM +#ifdef CONFIG_ARM_CPU_SUSPEND /* * The following code must assume it is running from physical address * where absolute virtual addresses to the data section have to be diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 5e91112..3daf1ed 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -11,7 +11,9 @@ */ #include <linux/errno.h> +#include <linux/jiffies.h> #include <asm/cp15.h> +#include <asm/proc-fns.h> #include "common.h" diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c deleted file mode 100644 index e05cf40..0000000 --- a/arch/arm/mach-imx/iram_alloc.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/genalloc.h> -#include "linux/platform_data/imx-iram.h" - -static unsigned long iram_phys_base; -static void __iomem *iram_virt_base; -static struct gen_pool *iram_pool; - -static inline void __iomem *iram_phys_to_virt(unsigned long p) -{ - return iram_virt_base + (p - iram_phys_base); -} - -void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) -{ - if (!iram_pool) - return NULL; - - *dma_addr = gen_pool_alloc(iram_pool, size); - pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr); - if (!*dma_addr) - return NULL; - return iram_phys_to_virt(*dma_addr); -} -EXPORT_SYMBOL(iram_alloc); - -void iram_free(unsigned long addr, unsigned int size) -{ - if (!iram_pool) - return; - - gen_pool_free(iram_pool, addr, size); -} -EXPORT_SYMBOL(iram_free); - -int __init iram_init(unsigned long base, unsigned long size) -{ - iram_phys_base = base; - - iram_pool = gen_pool_create(PAGE_SHIFT, -1); - if (!iram_pool) - return -ENOMEM; - - gen_pool_add(iram_pool, base, size, -1); - iram_virt_base = ioremap(iram_phys_base, size); - if (!iram_virt_base) - return -EIO; - - pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base); - return 0; -} diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c index 7777767..9c392a2 100644 --- a/arch/arm/mach-msm/last_radio_log.c +++ b/arch/arm/mach-msm/last_radio_log.c @@ -66,6 +66,6 @@ void msm_init_last_radio_log(struct module *owner) pr_err("%s: last radio log is %d bytes long\n", __func__, radio_log_size); last_radio_log_fops.owner = owner; - entry->size = radio_log_size; + proc_set_size(entry, radio_log_size); } EXPORT_SYMBOL(msm_init_last_radio_log); diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 1a4e887..68ab858 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -301,7 +301,7 @@ static int __init omap1_system_dma_init(void) if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_device_put; + goto exit_iounmap; } p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); @@ -309,7 +309,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n", __func__, pdev->name); ret = -ENOMEM; - goto exit_device_del; + goto exit_iounmap; } d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); @@ -402,8 +402,8 @@ exit_release_d: kfree(d); exit_release_p: kfree(p); -exit_device_del: - platform_device_del(pdev); +exit_iounmap: + iounmap(dma_base); exit_device_put: platform_device_put(pdev); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 857b1f0..f49cd51 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -37,8 +37,6 @@ config ARCH_OMAP2PLUS_TYPICAL select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 select PM_RUNTIME select REGULATOR - select SERIAL_OMAP - select SERIAL_OMAP_CONSOLE select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 select VFP diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 62bb352..55a9d67 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -32,12 +32,12 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 -obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o +smp-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o +smp-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o omap-4-5-common = omap4-common.o omap-wakeupgen.o \ sleep44xx.o -obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) -obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) +obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6de7860..04c1165 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -112,13 +112,13 @@ static u8 omap3_beagle_version; */ static struct { int mmc1_gpio_wp; - int usb_pwr_level; + bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */ int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, - .usb_pwr_level = GPIOF_OUT_INIT_LOW, + .usb_pwr_level = 0, .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, @@ -178,7 +178,7 @@ static void __init omap3_beagle_init_rev(void) case 0: printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; - beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_config.usb_pwr_level = 1; beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; case 2: diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 1a88467..18ca61e 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -73,11 +73,11 @@ #define LIS302_IRQ1_GPIO 181 #define LIS302_IRQ2_GPIO 180 /* Not yet in use */ -/* list all spi devices here */ +/* List all SPI devices here. Note that the list/probe order seems to matter! */ enum { RX51_SPI_WL1251, - RX51_SPI_MIPID, /* LCD panel */ RX51_SPI_TSC2005, /* Touch Controller */ + RX51_SPI_MIPID, /* LCD panel */ }; static struct wl12xx_platform_data wl1251_pdata; diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index dab9fc0..49fd0d5 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/of.h> #include <linux/omap-dma.h> #include "soc.h" @@ -304,6 +305,9 @@ static int __init omap2_system_dma_init(void) if (res) return res; + if (of_have_populated_dt()) + return res; + pdev = platform_device_register_full(&omap_dma_dev_info); if (IS_ERR(pdev)) return PTR_ERR(pdev); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index ed946df..6c4da12 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1520,36 +1520,22 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_node_by_name(child, "nand") { - ret = gpmc_probe_nand_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + for_each_child_of_node(pdev->dev.of_node, child) { - for_each_node_by_name(child, "onenand") { - ret = gpmc_probe_onenand_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + if (!child->name) + continue; - for_each_node_by_name(child, "nor") { - ret = gpmc_probe_generic_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + if (of_node_cmp(child->name, "nand") == 0) + ret = gpmc_probe_nand_child(pdev, child); + else if (of_node_cmp(child->name, "onenand") == 0) + ret = gpmc_probe_onenand_child(pdev, child); + else if (of_node_cmp(child->name, "ethernet") == 0 || + of_node_cmp(child->name, "nor") == 0) + ret = gpmc_probe_generic_child(pdev, child); - for_each_node_by_name(child, "ethernet") { - ret = gpmc_probe_generic_child(pdev, child); - if (ret < 0) { + if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", + __func__, child->full_name)) of_node_put(child); - return ret; - } } return 0; diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0f4c18e..1272c41 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -419,11 +419,15 @@ void __init omap3xxx_check_revision(void) cpu_rev = "1.0"; break; case 1: - /* FALLTHROUGH */ - default: omap_revision = AM335X_REV_ES2_0; cpu_rev = "2.0"; break; + case 2: + /* FALLTHROUGH */ + default: + omap_revision = AM335X_REV_ES2_1; + cpu_rev = "2.1"; + break; } break; case 0xb8f2: @@ -644,13 +648,12 @@ void __init omap_soc_device_init(void) soc_dev_attr->revision = soc_rev; soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr); return; } parent = soc_device_to_device(soc_dev); - if (!IS_ERR_OR_NULL(parent)) - device_create_file(parent, &omap_soc_attr); + device_create_file(parent, &omap_soc_attr); } #endif /* CONFIG_SOC_BUS */ diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h index 6543ebf..3f26d29 100644 --- a/arch/arm/mach-omap2/mux34xx.h +++ b/arch/arm/mach-omap2/mux34xx.h @@ -393,6 +393,10 @@ #define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c #define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e #define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 +#define OMAP3_CONTROL_PADCONF_GPIO_127 0xa24 +#define OMAP3_CONTROL_PADCONF_GPIO_126 0xa26 +#define OMAP3_CONTROL_PADCONF_GPIO_128 0xa28 +#define OMAP3_CONTROL_PADCONF_GPIO_129 0xa2a #define OMAP3_CONTROL_PADCONF_MUX_SIZE \ - (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2) + (OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2) diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index eeea4fa..e6d2307 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -876,4 +876,4 @@ static int __init omap_device_late_init(void) bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); return 0; } -omap_late_initcall(omap_device_late_init); +omap_late_initcall_sync(omap_device_late_init); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 18fdeeb..197cc16 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -396,6 +396,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define AM335X_CLASS 0x33500033 #define AM335X_REV_ES1_0 AM335X_CLASS #define AM335X_REV_ES2_0 (AM335X_CLASS | (0x1 << 8)) +#define AM335X_REV_ES2_1 (AM335X_CLASS | (0x2 << 8)) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) @@ -496,6 +497,7 @@ level(__##fn); #define omap_subsys_initcall(fn) omap_initcall(subsys_initcall, fn) #define omap_device_initcall(fn) omap_initcall(device_initcall, fn) #define omap_late_initcall(fn) omap_initcall(late_initcall, fn) +#define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn) #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 0548149..f8b23b8 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -553,6 +553,8 @@ static inline void __init realtime_counter_init(void) clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_gptimer_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ @@ -563,6 +565,8 @@ void __init omap##name##_gptimer_timer_init(void) \ clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_sync32k_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 80ca974..6988b11 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -38,7 +38,7 @@ config ARCH_MARCO select CPU_V7 select HAVE_ARM_SCU if SMP select HAVE_SMP - select SMP_ON_UP + select SMP_ON_UP if SMP help Support for CSR SiRFSoC ARM Cortex A9 Platform diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 9075461..96100db 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -162,7 +162,6 @@ config MACH_XCEP select MTD select MTD_CFI select MTD_CFI_INTELEXT - select MTD_CHAR select MTD_PHYSMAP select PXA25x select SMC91X diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 3621599..7aa6e8c 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -35,6 +35,8 @@ void __init spear13xx_l2x0_init(void) * write alloc and 'Full line of zero' options * */ + if (!IS_ENABLED(CONFIG_CACHE_L2X0)) + return; writel_relaxed(0x06, VA_L2CC_BASE + L2X0_PREFETCH_CTRL); diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 20c3b37..84d72fc 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -63,6 +63,7 @@ config ARCH_TEGRA_114_SOC select ARM_ARCH_TIMER select ARM_GIC select ARM_L1_CACHE_SHIFT_6 + select CPU_FREQ_TABLE if CPU_FREQ select CPU_V7 select PINCTRL select PINCTRL_TEGRA114 diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index f66d7de..6a4387e 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -19,6 +19,8 @@ if ARCH_U8500 config UX500_SOC_COMMON bool default y + select ABX500_CORE + select AB8500_CORE select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a15dd6b..3cd555a 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -403,8 +403,8 @@ static int mop500_prox_activate(struct device *dev) "no regulator\n"); return PTR_ERR(prox_regulator); } - regulator_enable(prox_regulator); - return 0; + + return regulator_enable(prox_regulator); } static void mop500_prox_deactivate(struct device *dev) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 995928b..e90b5ab 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -191,7 +191,7 @@ static const char *db8500_read_soc_id(void) /* Throw these device-specific numbers into the entropy pool */ add_device_randomness(uid, 0x14); return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", - readl((u32 *)uid+1), + readl((u32 *)uid+0), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index b6083bb..8802030 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -450,7 +450,6 @@ static void __init v2m_dt_init(void) static const char * const v2m_dt_match[] __initconst = { "arm,vexpress", - "xen,xenvm", NULL, }; diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c index adc0945..061f283 100644 --- a/arch/arm/mach-virt/virt.c +++ b/arch/arm/mach-virt/virt.c @@ -32,6 +32,7 @@ static void __init virt_init(void) static const char *virt_dt_match[] = { "linux,dummy-virt", + "xen,xenvm", NULL }; diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 2eca54b..9433605 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -3,6 +3,6 @@ # ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -orion-gpio-$(CONFIG_GENERIC_GPIO) += gpio.o +orion-gpio-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o obj-$(CONFIG_PLAT_ORION_LEGACY) += $(orion-gpio-y) diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index e39c2ba..249fe63 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -150,7 +150,7 @@ err_out: } /* - * GENERIC_GPIO primitives. + * GPIO primitives. */ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin) { diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 8dc0605..d30042e 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -2,6 +2,7 @@ #include <xen/events.h> #include <xen/grant_table.h> #include <xen/hvm.h> +#include <xen/interface/vcpu.h> #include <xen/interface/xen.h> #include <xen/interface/memory.h> #include <xen/interface/hvm/params.h> @@ -9,9 +10,11 @@ #include <xen/platform_pci.h> #include <xen/xenbus.h> #include <xen/page.h> +#include <xen/interface/sched.h> #include <xen/xen-ops.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> +#include <asm/system_misc.h> #include <linux/interrupt.h> #include <linux/irqreturn.h> #include <linux/module.h> @@ -32,6 +35,7 @@ struct shared_info xen_dummy_shared_info; struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); +static struct vcpu_info __percpu *xen_vcpu_info; /* These are unused until we support booting "pre-ballooned" */ unsigned long xen_released_pages; @@ -148,6 +152,47 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); +static int __init xen_secondary_init(unsigned int cpu) +{ + struct vcpu_register_vcpu_info info; + struct vcpu_info *vcpup; + int err; + + pr_info("Xen: initializing cpu%d\n", cpu); + vcpup = per_cpu_ptr(xen_vcpu_info, cpu); + + info.mfn = __pa(vcpup) >> PAGE_SHIFT; + info.offset = offset_in_page(vcpup); + + err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); + if (err) { + pr_debug("register_vcpu_info failed: err=%d\n", err); + } else { + /* This cpu is using the registered vcpu info, even if + later ones fail to. */ + per_cpu(xen_vcpu, cpu) = vcpup; + } + return 0; +} + +static void xen_restart(char str, const char *cmd) +{ + struct sched_shutdown r = { .reason = SHUTDOWN_reboot }; + int rc; + rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); + if (rc) + BUG(); +} + +static void xen_power_off(void) +{ + struct sched_shutdown r = { .reason = SHUTDOWN_poweroff }; + int rc; + rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); + if (rc) + BUG(); +} + /* * see Documentation/devicetree/bindings/arm/xen.txt for the * documentation of the Xen Device Tree format. @@ -163,6 +208,7 @@ static int __init xen_guest_init(void) const char *version = NULL; const char *xen_prefix = "xen,xen-"; struct resource res; + int i; node = of_find_compatible_node(NULL, NULL, "xen,xen"); if (!node) { @@ -209,18 +255,26 @@ static int __init xen_guest_init(void) /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info * page, we use it in the event channel upcall and in some pvclock - * related functions. We don't need the vcpu_info placement - * optimizations because we don't use any pv_mmu or pv_irq op on - * HVM. + * related functions. * The shared info contains exactly 1 CPU (the boot CPU). The guest * is required to use VCPUOP_register_vcpu_info to place vcpu info - * for secondary CPUs as they are brought up. */ - per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; + * for secondary CPUs as they are brought up. + * For uniformity we use VCPUOP_register_vcpu_info even on cpu0. + */ + xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info), + sizeof(struct vcpu_info)); + if (xen_vcpu_info == NULL) + return -ENOMEM; + for_each_online_cpu(i) + xen_secondary_init(i); gnttab_init(); if (!xen_initial_domain()) xenbus_probe(NULL); + pm_power_off = xen_power_off; + arm_pm_restart = xen_restart; + return 0; } core_initcall(xen_guest_init); @@ -231,6 +285,11 @@ static irqreturn_t xen_arm_callback(int irq, void *arg) return IRQ_HANDLED; } +static __init void xen_percpu_enable_events(void *unused) +{ + enable_percpu_irq(xen_events_irq, 0); +} + static int __init xen_init_events(void) { if (!xen_domain() || xen_events_irq < 0) @@ -239,12 +298,12 @@ static int __init xen_init_events(void) xen_init_IRQ(); if (request_percpu_irq(xen_events_irq, xen_arm_callback, - "events", xen_vcpu)) { + "events", &xen_vcpu)) { pr_err("Error requesting IRQ %d\n", xen_events_irq); return -EINVAL; } - enable_percpu_irq(xen_events_irq, 0); + on_each_cpu(xen_percpu_enable_events, NULL, 0); return 0; } @@ -259,4 +318,5 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op); EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op); EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op); EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 71f7239..199cb2d 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -87,6 +87,7 @@ HYPERCALL2(event_channel_op); HYPERCALL2(hvm_op); HYPERCALL2(memory_op); HYPERCALL2(physdev_op); +HYPERCALL3(vcpu_op); ENTRY(privcmd_call) stmdb sp!, {r4} diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 73b6e76..48347dc 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -6,6 +6,7 @@ config ARM64 select ARCH_WANT_FRAME_POINTERS select ARM_AMBA select ARM_ARCH_TIMER + select ARM_GIC select CLONE_BACKWARDS select COMMON_CLK select GENERIC_CLOCKEVENTS @@ -31,6 +32,8 @@ config ARM64 select OF select OF_EARLY_FLATTREE select PERF_USE_VMALLOC + select POWER_RESET + select POWER_SUPPLY select RTC_LIB select SPARSE_IRQ select SYSCTL_EXCEPTION_TRACE @@ -92,9 +95,6 @@ config SWIOTLB config IOMMU_HELPER def_bool SWIOTLB -config GENERIC_GPIO - bool - source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -105,6 +105,7 @@ config ARCH_VEXPRESS bool "ARMv8 software model (Versatile Express)" select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_VERSATILE + select POWER_RESET_VEXPRESS select VEXPRESS_CONFIG help This enables support for the ARMv8 software model (Versatile diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts index 198682b..84fcc50 100644 --- a/arch/arm64/boot/dts/foundation-v8.dts +++ b/arch/arm64/boot/dts/foundation-v8.dts @@ -23,7 +23,7 @@ }; cpus { - #address-cells = <1>; + #address-cells = <2>; #size-cells = <0>; cpu@0 { diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h index 95e4072..a6e1750 100644 --- a/arch/arm64/include/asm/system_misc.h +++ b/arch/arm64/include/asm/system_misc.h @@ -41,7 +41,7 @@ extern void show_pte(struct mm_struct *mm, unsigned long addr); extern void __show_regs(struct pt_regs *); void soft_restart(unsigned long); -extern void (*pm_restart)(const char *cmd); +extern void (*arm_pm_restart)(char str, const char *cmd); #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index f491972..46f02c3 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -81,8 +81,8 @@ void soft_restart(unsigned long addr) void (*pm_power_off)(void); EXPORT_SYMBOL_GPL(pm_power_off); -void (*pm_restart)(const char *cmd); -EXPORT_SYMBOL_GPL(pm_restart); +void (*arm_pm_restart)(char str, const char *cmd); +EXPORT_SYMBOL_GPL(arm_pm_restart); void arch_cpu_idle_prepare(void) { @@ -131,8 +131,8 @@ void machine_restart(char *cmd) local_fiq_disable(); /* Now call the architecture specific reboot code. */ - if (pm_restart) - pm_restart(cmd); + if (arm_pm_restart) + arm_pm_restart('h', cmd); /* * Whoops - the architecture was unable to reboot. diff --git a/arch/arm64/lib/bitops.S b/arch/arm64/lib/bitops.S index 36216d3..e5db797 100644 --- a/arch/arm64/lib/bitops.S +++ b/arch/arm64/lib/bitops.S @@ -21,13 +21,13 @@ /* * x0: bits 5:0 bit offset - * bits 63:6 word offset + * bits 31:6 word offset * x1: address */ .macro bitop, name, instr ENTRY( \name ) - and x3, x0, #63 // Get bit offset - eor x0, x0, x3 // Clear low bits + and w3, w0, #63 // Get bit offset + eor w0, w0, w3 // Clear low bits mov x2, #1 add x1, x1, x0, lsr #3 // Get word offset lsl x3, x2, x3 // Create mask @@ -41,8 +41,8 @@ ENDPROC(\name ) .macro testop, name, instr ENTRY( \name ) - and x3, x0, #63 // Get bit offset - eor x0, x0, x3 // Clear low bits + and w3, w0, #63 // Get bit offset + eor w0, w0, w3 // Clear low bits mov x2, #1 add x1, x1, x0, lsr #3 // Get word offset lsl x4, x2, x3 // Create mask diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 5263817..98af6e7 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -148,6 +148,7 @@ void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs) #define VM_FAULT_BADACCESS 0x020000 #define ESR_WRITE (1 << 6) +#define ESR_CM (1 << 8) #define ESR_LNX_EXEC (1 << 24) /* @@ -206,7 +207,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; - int write = esr & ESR_WRITE; + bool write = (esr & ESR_WRITE) && !(esr & ESR_CM); unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | (write ? FAULT_FLAG_WRITE : 0); diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 22c4030..bdc3558 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -26,9 +26,6 @@ config AVR32 There is an AVR32 Linux project with a web page at http://avr32linux.org/. -config GENERIC_GPIO - def_bool y - config STACKTRACE_SUPPORT def_bool y diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 453ebe4..a117652 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -27,7 +27,7 @@ config BLACKFIN select HAVE_OPROFILE select HAVE_PERF_EVENTS select ARCH_HAVE_CUSTOM_GPIO_H - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select HAVE_UID16 select HAVE_UNDERSCORE_SYMBOL_PREFIX select VIRT_TO_BUS @@ -52,9 +52,6 @@ config GENERIC_BUG config ZONE_DMA def_bool y -config GENERIC_GPIO - def_bool y - config FORCE_MAX_ZONEORDER int default "14" diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 06dd026..8769a90 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -264,7 +264,6 @@ config ETRAX_AXISFLASHMAP select MTD_CFI select MTD_CFI_AMDSTD select MTD_JEDECPROBE if ETRAX_ARCH_V32 - select MTD_CHAR select MTD_BLOCK select MTD_COMPLEX_MAPPINGS help diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index af4a486..c55971a 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -404,7 +404,6 @@ config ETRAX_AXISFLASHMAP select MTD_CFI select MTD_CFI_AMDSTD select MTD_JEDECPROBE - select MTD_CHAR select MTD_BLOCK select MTD_COMPLEX_MAPPINGS help diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c index b82e086..cd9f15b 100644 --- a/arch/cris/kernel/profile.c +++ b/arch/cris/kernel/profile.c @@ -76,7 +76,7 @@ static int __init init_cris_profile(void) entry = proc_create("system_profile", S_IWUSR | S_IRUGO, NULL, &cris_proc_profile_operations); if (entry) { - entry->size = SAMPLE_BUFFER_SIZE; + proc_set_size(entry, SAMPLE_BUFFER_SIZE); } prof_running = 1; diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig index 04dff5b..33a9792 100644 --- a/arch/hexagon/Kconfig +++ b/arch/hexagon/Kconfig @@ -30,8 +30,6 @@ config HEXAGON select GENERIC_CLOCKEVENTS_BROADCAST select MODULES_USE_ELF_RELA select GENERIC_CPU_DEVICES - select GENERIC_KERNEL_THREAD - select GENERIC_KERNEL_EXECVE ---help--- Qualcomm Hexagon is a processor architecture designed for high performance and low power across a wide variety of applications. @@ -157,9 +155,6 @@ source "mm/Kconfig" source "kernel/Kconfig.hz" -config GENERIC_GPIO - def_bool n - endmenu source "init/Kconfig" diff --git a/arch/hexagon/kernel/vm_entry.S b/arch/hexagon/kernel/vm_entry.S index e308618..67c6ccc 100644 --- a/arch/hexagon/kernel/vm_entry.S +++ b/arch/hexagon/kernel/vm_entry.S @@ -291,12 +291,12 @@ event_dispatch: /* "Nested control path" -- if the previous mode was kernel */ { R0 = memw(R29 + #_PT_ER_VMEST); - R16.L = #LO(do_work_pending); + R26.L = #LO(do_work_pending); } { P0 = tstbit(R0, #HVM_VMEST_UM_SFT); if (!P0.new) jump:nt restore_all; - R16.H = #HI(do_work_pending); + R26.H = #HI(do_work_pending); R0 = #VM_INT_DISABLE; } @@ -304,7 +304,7 @@ event_dispatch: * Check also the return from fork/system call, normally coming back from * user mode * - * R16 needs to have do_work_pending, and R0 should have VM_INT_DISABLE + * R26 needs to have do_work_pending, and R0 should have VM_INT_DISABLE */ check_work_pending: @@ -313,7 +313,7 @@ check_work_pending: { R0 = R29; /* regs should still be at top of stack */ R1 = memw(THREADINFO_REG + #_THREAD_INFO_FLAGS); - callr R16; + callr R26; } { @@ -375,11 +375,11 @@ _K_enter_debug: ret_from_fork: { call schedule_tail - R16.H = #HI(do_work_pending); + R26.H = #HI(do_work_pending); } { P0 = cmp.eq(R24, #0); - R16.L = #LO(do_work_pending); + R26.L = #LO(do_work_pending); R0 = #VM_INT_DISABLE; } if P0 jump check_work_pending diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d393f84..1a2b774 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -101,9 +101,6 @@ config GENERIC_CALIBRATE_DELAY config HAVE_SETUP_PER_CPU_AREA def_bool y -config GENERIC_GPIO - bool - config DMI bool default y diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 6de8133..821170e 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -35,9 +35,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool -config GENERIC_GPIO - bool - config GENERIC_HWEIGHT bool default y diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index b1cfff8..d266787 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -22,8 +22,7 @@ config M68KCLASSIC config COLDFIRE bool "Coldfire CPU family support" - select GENERIC_GPIO - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select ARCH_HAVE_CUSTOM_GPIO_H select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 diff --git a/arch/metag/Kconfig b/arch/metag/Kconfig index 6f16c14..dcd9440 100644 --- a/arch/metag/Kconfig +++ b/arch/metag/Kconfig @@ -52,9 +52,6 @@ config GENERIC_HWEIGHT config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_GPIO - def_bool n - config NO_IOPORT def_bool y diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 54237af..d22a4ec 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -54,9 +54,6 @@ config GENERIC_HWEIGHT config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_GPIO - bool - config GENERIC_CSUM def_bool y diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e5f3794..a90cfc7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -61,8 +61,7 @@ config MIPS_ALCHEMY select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select GENERIC_GPIO - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_REQUIRE_GPIOLIB select SYS_SUPPORTS_ZBOOT select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI @@ -225,7 +224,6 @@ config MACH_JZ4740 select SYS_SUPPORTS_ZBOOT_UART16550 select DMA_NONCOHERENT select IRQ_CPU - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select SYS_HAS_EARLY_PRINTK select HAVE_PWM @@ -937,7 +935,6 @@ config CSRC_SB1250 bool config GPIO_TXX9 - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB bool @@ -1009,9 +1006,6 @@ config GENERIC_ISA_DMA_SUPPORT_BROKEN config ISA_DMA_API bool -config GENERIC_GPIO - bool - config HOLES_IN_ZONE bool @@ -1112,7 +1106,6 @@ config SOC_PNX833X select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_GPIO select CPU_MIPSR2_IRQ_VI config SOC_PNX8335 @@ -1203,7 +1196,6 @@ config CPU_LOONGSON2F bool "Loongson 2F" depends on SYS_HAS_CPU_LOONGSON2F select CPU_LOONGSON2 - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help The Loongson 2F processor implements the MIPS III instruction set diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile index e526488..4c57b3e 100644 --- a/arch/mips/loongson/common/Makefile +++ b/arch/mips/loongson/common/Makefile @@ -4,7 +4,7 @@ obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ pci.o bonito-irq.o mem.o machtype.o platform.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_GPIOLIB) += gpio.o # # Serial port support diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 5524f2c..5364aab 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -118,7 +118,7 @@ EXPORT_SYMBOL(clk_put); /* GPIO support */ -#ifdef CONFIG_GENERIC_GPIO +#ifdef CONFIG_GPIOLIB int gpio_to_irq(unsigned gpio) { return -EINVAL; diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 81b9ddb..1072bfd 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -44,9 +44,6 @@ config GENERIC_HWEIGHT config NO_IOPORT def_bool y -config GENERIC_GPIO - def_bool y - config TRACE_IRQFLAGS_SUPPORT def_bool y diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 433e75a..cad060f 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -13,6 +13,7 @@ config PARISC select BUG select HAVE_PERF_EVENTS select GENERIC_ATOMIC64 if !64BIT + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select HAVE_GENERIC_HARDIRQS select BROKEN_RODATA select GENERIC_IRQ_PROBE @@ -242,6 +243,14 @@ config SMP If you don't know what to do here, say N. +config IRQSTACKS + bool "Use separate kernel stacks when processing interrupts" + default n + help + If you say Y here the kernel will use separate kernel stacks + for handling hard and soft interrupts. This can help avoid + overflowing the process kernel stacks. + config HOTPLUG_CPU bool default y if SMP diff --git a/arch/parisc/Kconfig.debug b/arch/parisc/Kconfig.debug index bc989e5..08a332f 100644 --- a/arch/parisc/Kconfig.debug +++ b/arch/parisc/Kconfig.debug @@ -13,3 +13,14 @@ config DEBUG_RODATA If in doubt, say "N". endmenu + +config DEBUG_STACKOVERFLOW + bool "Check for stack overflows" + default y + depends on DEBUG_KERNEL + ---help--- + Say Y here if you want to check the overflows of kernel, IRQ + and exception stacks. This option will cause messages of the + stacks in detail when free stack space drops below a certain + limit. + If in doubt, say "N". diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 113e282..2f967cc 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -24,9 +24,7 @@ CHECKFLAGS += -D__hppa__=1 LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) MACHINE := $(shell uname -m) -ifeq ($(MACHINE),parisc*) -NATIVE := 1 -endif +NATIVE := $(if $(filter parisc%,$(MACHINE)),1,0) ifdef CONFIG_64BIT UTS_MACHINE := parisc64 diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index f38e198..472886c 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -229,6 +229,29 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) +/* + * atomic64_dec_if_positive - decrement by 1 if old value positive + * @v: pointer of type atomic_t + * + * The function returns the old value of *v minus 1, even if + * the atomic variable, v, was not decremented. + */ +static inline long atomic64_dec_if_positive(atomic64_t *v) +{ + long c, old, dec; + c = atomic64_read(v); + for (;;) { + dec = c - 1; + if (unlikely(dec < 0)) + break; + old = atomic64_cmpxchg((v), c, dec); + if (likely(old == c)) + break; + c = old; + } + return dec; +} + #endif /* !CONFIG_64BIT */ diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index 106b395..d0eae5f 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -46,6 +46,9 @@ extern struct hppa_dma_ops pcx_dma_ops; extern struct hppa_dma_ops *hppa_dma_ops; +#define dma_alloc_attrs(d, s, h, f, a) dma_alloc_coherent(d, s, h, f) +#define dma_free_attrs(d, s, h, f, a) dma_free_coherent(d, s, h, f) + static inline void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h index 0d68184..12373c4 100644 --- a/arch/parisc/include/asm/hardirq.h +++ b/arch/parisc/include/asm/hardirq.h @@ -1,11 +1,41 @@ /* hardirq.h: PA-RISC hard IRQ support. * * Copyright (C) 2001 Matthew Wilcox <matthew@wil.cx> + * Copyright (C) 2013 Helge Deller <deller@gmx.de> */ #ifndef _PARISC_HARDIRQ_H #define _PARISC_HARDIRQ_H -#include <asm-generic/hardirq.h> +#include <linux/cache.h> +#include <linux/threads.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; +#ifdef CONFIG_DEBUG_STACKOVERFLOW + unsigned int kernel_stack_usage; +#endif +#ifdef CONFIG_SMP + unsigned int irq_resched_count; + unsigned int irq_call_count; +#endif + unsigned int irq_tlb_count; +} ____cacheline_aligned irq_cpustat_t; + +DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); + +#define __ARCH_IRQ_STAT +#define __IRQ_STAT(cpu, member) (irq_stat[cpu].member) +#define inc_irq_stat(member) this_cpu_inc(irq_stat.member) +#define local_softirq_pending() this_cpu_read(irq_stat.__softirq_pending) + +#define __ARCH_SET_SOFTIRQ_PENDING + +#define set_softirq_pending(x) \ + this_cpu_write(irq_stat.__softirq_pending, (x)) +#define or_softirq_pending(x) this_cpu_or(irq_stat.__softirq_pending, (x)) + +#define ack_bad_irq(irq) WARN(1, "unexpected IRQ trap at vector %02x\n", irq) #endif /* _PARISC_HARDIRQ_H */ diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h index 09b54a5..0640155 100644 --- a/arch/parisc/include/asm/processor.h +++ b/arch/parisc/include/asm/processor.h @@ -20,8 +20,6 @@ #endif /* __ASSEMBLY__ */ -#define KERNEL_STACK_SIZE (4*PAGE_SIZE) - /* * Default implementation of macro that returns current * instruction pointer ("program counter"). @@ -61,6 +59,23 @@ #ifndef __ASSEMBLY__ /* + * IRQ STACK - used for irq handler + */ +#ifdef __KERNEL__ + +#define IRQ_STACK_SIZE (4096 << 2) /* 16k irq stack size */ + +union irq_stack_union { + unsigned long stack[IRQ_STACK_SIZE/sizeof(unsigned long)]; +}; + +DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); + +void call_on_stack(unsigned long p1, void *func, unsigned long new_stack); + +#endif /* __KERNEL__ */ + +/* * Data detected about CPUs at boot time which is the same for all CPU's. * HP boxes are SMP - ie identical processors. * @@ -97,7 +112,6 @@ struct cpuinfo_parisc { unsigned long txn_addr; /* MMIO addr of EIR or id_eid */ #ifdef CONFIG_SMP unsigned long pending_ipi; /* bitmap of type ipi_message_type */ - unsigned long ipi_count; /* number ipi Interrupts */ #endif unsigned long bh_count; /* number of times bh was invoked */ unsigned long prof_counter; /* per CPU profiling support */ diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h index 6182832..540c88f 100644 --- a/arch/parisc/include/asm/thread_info.h +++ b/arch/parisc/include/asm/thread_info.h @@ -40,7 +40,7 @@ struct thread_info { /* thread information allocation */ -#define THREAD_SIZE_ORDER 2 +#define THREAD_SIZE_ORDER 2 /* PA-RISC requires at least 16k stack */ /* Be sure to hunt all references to this down when you change the size of * the kernel stack */ #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h index 8f1a810..5273da9 100644 --- a/arch/parisc/include/asm/tlbflush.h +++ b/arch/parisc/include/asm/tlbflush.h @@ -22,6 +22,8 @@ extern spinlock_t pa_tlb_lock; extern void flush_tlb_all(void); extern void flush_tlb_all_local(void *); +#define smp_flush_tlb_all() flush_tlb_all() + /* * flush_tlb_mm() * diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 83ded26..65fb4cb 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -606,7 +606,7 @@ void clear_user_highpage(struct page *page, unsigned long vaddr) /* Clear using TMPALIAS region. The page doesn't need to be flushed but the kernel mapping needs to be purged. */ - vto = kmap_atomic(page, KM_USER0); + vto = kmap_atomic(page); /* The PA-RISC 2.0 Architecture book states on page F-6: "Before a write-capable translation is enabled, *all* @@ -641,8 +641,8 @@ void copy_user_highpage(struct page *to, struct page *from, the `to' page must be flushed in copy_user_page_asm since it can be used to bring in executable code. */ - vfrom = kmap_atomic(from, KM_USER0); - vto = kmap_atomic(to, KM_USER1); + vfrom = kmap_atomic(from); + vto = kmap_atomic(to); purge_kernel_dcache_page_asm((unsigned long)vto); purge_tlb_start(flags); diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index f33201b..4bb96ad 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -400,7 +400,15 @@ #if PT_NLEVELS == 3 extru \va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index #else +# if defined(CONFIG_64BIT) + extrd,u \va,63-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index + #else + # if PAGE_SIZE > 4096 + extru \va,31-ASM_PGDIR_SHIFT,32-ASM_PGDIR_SHIFT,\index + # else extru \va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index + # endif +# endif #endif dep %r0,31,PAGE_SHIFT,\pmd /* clear offset */ copy %r0,\pte @@ -615,7 +623,7 @@ .text - .align PAGE_SIZE + .align 4096 ENTRY(fault_vector_20) /* First vector is invalid (0) */ @@ -825,11 +833,6 @@ ENTRY(syscall_exit_rfi) STREG %r19,PT_SR7(%r16) intr_return: - /* NOTE: Need to enable interrupts incase we schedule. */ - ssm PSW_SM_I, %r0 - -intr_check_resched: - /* check for reschedule */ mfctl %cr30,%r1 LDREG TI_FLAGS(%r1),%r19 /* sched.h: TIF_NEED_RESCHED */ @@ -856,6 +859,11 @@ intr_check_sig: LDREG PT_IASQ1(%r16), %r20 cmpib,COND(=),n 0,%r20,intr_restore /* backward */ + /* NOTE: We need to enable interrupts if we have to deliver + * signals. We used to do this earlier but it caused kernel + * stack overflows. */ + ssm PSW_SM_I, %r0 + copy %r0, %r25 /* long in_syscall = 0 */ #ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ @@ -907,6 +915,10 @@ intr_do_resched: cmpib,COND(=) 0, %r20, intr_do_preempt nop + /* NOTE: We need to enable interrupts if we schedule. We used + * to do this earlier but it caused kernel stack overflows. */ + ssm PSW_SM_I, %r0 + #ifdef CONFIG_64BIT ldo -16(%r30),%r29 /* Reference param save area */ #endif @@ -1694,7 +1706,8 @@ ENTRY(sys_\name\()_wrapper) ldo TASK_REGS(%r1),%r1 reg_save %r1 mfctl %cr27, %r28 - b sys_\name + ldil L%sys_\name, %r31 + be R%sys_\name(%sr4,%r31) STREG %r28, PT_CR27(%r1) ENDPROC(sys_\name\()_wrapper) .endm @@ -1997,6 +2010,47 @@ ftrace_stub: ENDPROC(return_to_handler) #endif /* CONFIG_FUNCTION_TRACER */ +#ifdef CONFIG_IRQSTACKS +/* void call_on_stack(unsigned long param1, void *func, + unsigned long new_stack) */ +ENTRY(call_on_stack) + copy %sp, %r1 + + /* Regarding the HPPA calling conventions for function pointers, + we assume the PIC register is not changed across call. For + CONFIG_64BIT, the argument pointer is left to point at the + argument region allocated for the call to call_on_stack. */ +# ifdef CONFIG_64BIT + /* Switch to new stack. We allocate two 128 byte frames. */ + ldo 256(%arg2), %sp + /* Save previous stack pointer and return pointer in frame marker */ + STREG %rp, -144(%sp) + /* Calls always use function descriptor */ + LDREG 16(%arg1), %arg1 + bve,l (%arg1), %rp + STREG %r1, -136(%sp) + LDREG -144(%sp), %rp + bve (%rp) + LDREG -136(%sp), %sp +# else + /* Switch to new stack. We allocate two 64 byte frames. */ + ldo 128(%arg2), %sp + /* Save previous stack pointer and return pointer in frame marker */ + STREG %r1, -68(%sp) + STREG %rp, -84(%sp) + /* Calls use function descriptor if PLABEL bit is set */ + bb,>=,n %arg1, 30, 1f + depwi 0,31,2, %arg1 + LDREG 0(%arg1), %arg1 +1: + be,l 0(%sr4,%arg1), %sr0, %r31 + copy %r31, %rp + LDREG -84(%sp), %rp + bv (%rp) + LDREG -68(%sp), %sp +# endif /* CONFIG_64BIT */ +ENDPROC(call_on_stack) +#endif /* CONFIG_IRQSTACKS */ get_register: /* diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S index 5595a2f..e158b6f 100644 --- a/arch/parisc/kernel/hpmc.S +++ b/arch/parisc/kernel/hpmc.S @@ -55,13 +55,13 @@ * IODC requires 7K byte stack. That leaves 1K byte for os_hpmc. */ - .align PAGE_SIZE + .align 4096 hpmc_stack: .block 16384 #define HPMC_IODC_BUF_SIZE 0x8000 - .align PAGE_SIZE + .align 4096 hpmc_iodc_buf: .block HPMC_IODC_BUF_SIZE diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 8094d3e..e255db0 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -152,6 +152,39 @@ static struct irq_chip cpu_interrupt_type = { .irq_retrigger = NULL, }; +DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); +#define irq_stats(x) (&per_cpu(irq_stat, x)) + +/* + * /proc/interrupts printing for arch specific interrupts + */ +int arch_show_interrupts(struct seq_file *p, int prec) +{ + int j; + +#ifdef CONFIG_DEBUG_STACKOVERFLOW + seq_printf(p, "%*s: ", prec, "STK"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->kernel_stack_usage); + seq_printf(p, " Kernel stack usage\n"); +#endif +#ifdef CONFIG_SMP + seq_printf(p, "%*s: ", prec, "RES"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count); + seq_printf(p, " Rescheduling interrupts\n"); + seq_printf(p, "%*s: ", prec, "CAL"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); + seq_printf(p, " Function call interrupts\n"); +#endif + seq_printf(p, "%*s: ", prec, "TLB"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count); + seq_printf(p, " TLB shootdowns\n"); + return 0; +} + int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *) v, j; @@ -219,6 +252,9 @@ int show_interrupts(struct seq_file *p, void *v) raw_spin_unlock_irqrestore(&desc->lock, flags); } + if (i == NR_IRQS) + arch_show_interrupts(p, 3); + return 0; } @@ -330,6 +366,66 @@ static inline int eirr_to_irq(unsigned long eirr) return (BITS_PER_LONG - bit) + TIMER_IRQ; } +int sysctl_panic_on_stackoverflow = 1; + +static inline void stack_overflow_check(struct pt_regs *regs) +{ +#ifdef CONFIG_DEBUG_STACKOVERFLOW + #define STACK_MARGIN (256*6) + + /* Our stack starts directly behind the thread_info struct. */ + unsigned long stack_start = (unsigned long) current_thread_info(); + unsigned long sp = regs->gr[30]; + unsigned long stack_usage; + unsigned int *last_usage; + + /* if sr7 != 0, we interrupted a userspace process which we do not want + * to check for stack overflow. We will only check the kernel stack. */ + if (regs->sr[7]) + return; + + /* calculate kernel stack usage */ + stack_usage = sp - stack_start; + last_usage = &per_cpu(irq_stat.kernel_stack_usage, smp_processor_id()); + + if (unlikely(stack_usage > *last_usage)) + *last_usage = stack_usage; + + if (likely(stack_usage < (THREAD_SIZE - STACK_MARGIN))) + return; + + pr_emerg("stackcheck: %s will most likely overflow kernel stack " + "(sp:%lx, stk bottom-top:%lx-%lx)\n", + current->comm, sp, stack_start, stack_start + THREAD_SIZE); + + if (sysctl_panic_on_stackoverflow) + panic("low stack detected by irq handler - check messages\n"); +#endif +} + +#ifdef CONFIG_IRQSTACKS +DEFINE_PER_CPU(union irq_stack_union, irq_stack_union); + +static void execute_on_irq_stack(void *func, unsigned long param1) +{ + unsigned long *irq_stack_start; + unsigned long irq_stack; + int cpu = smp_processor_id(); + + irq_stack_start = &per_cpu(irq_stack_union, cpu).stack[0]; + irq_stack = (unsigned long) irq_stack_start; + irq_stack = ALIGN(irq_stack, 16); /* align for stack frame usage */ + + BUG_ON(*irq_stack_start); /* report bug if we were called recursive. */ + *irq_stack_start = 1; + + /* This is where we switch to the IRQ stack. */ + call_on_stack(param1, func, irq_stack); + + *irq_stack_start = 0; +} +#endif /* CONFIG_IRQSTACKS */ + /* ONLY called from entry.S:intr_extint() */ void do_cpu_irq_mask(struct pt_regs *regs) { @@ -364,7 +460,13 @@ void do_cpu_irq_mask(struct pt_regs *regs) goto set_out; } #endif + stack_overflow_check(regs); + +#ifdef CONFIG_IRQSTACKS + execute_on_irq_stack(&generic_handle_irq, irq); +#else generic_handle_irq(irq); +#endif /* CONFIG_IRQSTACKS */ out: irq_exit(); @@ -420,6 +522,4 @@ void __init init_IRQ(void) cpu_eiem = EIEM_MASK(TIMER_IRQ); #endif set_eiem(cpu_eiem); /* EIEM : enable all external intr */ - } - diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index 312b484..5e1de60 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -563,6 +563,15 @@ ENDPROC(copy_page_asm) * %r23 physical page (shifted for tlb insert) of "from" translation */ + /* Drop prot bits and convert to page addr for iitlbt and idtlbt */ + #define PAGE_ADD_SHIFT (PAGE_SHIFT-12) + .macro convert_phys_for_tlb_insert20 phys + extrd,u \phys, 56-PAGE_ADD_SHIFT, 32-PAGE_ADD_SHIFT, \phys +#if _PAGE_SIZE_ENCODING_DEFAULT + depdi _PAGE_SIZE_ENCODING_DEFAULT, 63, (63-58), \phys +#endif + .endm + /* * We can't do this since copy_user_page is used to bring in * file data that might have instructions. Since the data would @@ -589,15 +598,14 @@ ENTRY(copy_user_page_asm) sub %r25, %r1, %r23 ldil L%(TMPALIAS_MAP_START), %r28 - /* FIXME for different page sizes != 4k */ #ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ #endif - extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */ - extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */ + convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ + convert_phys_for_tlb_insert20 %r23 /* convert phys addr to tlb insert format */ depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,12, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ copy %r28, %r29 depdi 1, 41,1, %r29 /* Form aliased virtual address 'from' */ #else @@ -747,11 +755,10 @@ ENTRY(clear_user_page_asm) #ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ - /* FIXME: page size dependend */ #endif - extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ + convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,12, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ @@ -832,11 +839,10 @@ ENTRY(flush_dcache_page_asm) #ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ - /* FIXME: page size dependend */ #endif - extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ + convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,12, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ @@ -909,11 +915,10 @@ ENTRY(flush_icache_page_asm) #ifdef CONFIG_64BIT #if (TMPALIAS_MAP_START >= 0x80000000) depdi 0, 31,32, %r28 /* clear any sign extension */ - /* FIXME: page size dependend */ #endif - extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */ + convert_phys_for_tlb_insert20 %r26 /* convert phys addr to tlb insert format */ depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */ - depdi 0, 63,12, %r28 /* Clear any offset bits */ + depdi 0, 63,PAGE_SHIFT, %r28 /* Clear any offset bits */ #else extrw,u %r26, 24,25, %r26 /* convert phys addr to tlb insert format */ depw %r25, 31,22, %r28 /* Form aliased virtual address 'to' */ @@ -959,7 +964,7 @@ ENTRY(flush_icache_page_asm) fic,m %r1(%sr4,%r28) fic,m %r1(%sr4,%r28) fic,m %r1(%sr4,%r28) - cmpb,COND(<<) %r28, %r25,1b + cmpb,COND(<<) %r28, %r25,1b fic,m %r1(%sr4,%r28) sync diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index a3328c2..76b63e7 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -129,6 +129,8 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "The 32-bit Kernel has started...\n"); #endif + printk(KERN_INFO "Default page size is %dKB.\n", (int)(PAGE_SIZE / 1024)); + pdc_console_init(); #ifdef CONFIG_64BIT diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index fd1bb15..e3614fb 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -127,7 +127,7 @@ ipi_interrupt(int irq, void *dev_id) unsigned long flags; /* Count this now; we may make a call that never returns. */ - p->ipi_count++; + inc_irq_stat(irq_call_count); mb(); /* Order interrupt and bit testing. */ @@ -155,6 +155,7 @@ ipi_interrupt(int irq, void *dev_id) case IPI_RESCHEDULE: smp_debug(100, KERN_DEBUG "CPU%d IPI_RESCHEDULE\n", this_cpu); + inc_irq_stat(irq_resched_count); scheduler_ipi(); break; @@ -263,17 +264,6 @@ void arch_send_call_function_single_ipi(int cpu) } /* - * Flush all other CPU's tlb and then mine. Do this with on_each_cpu() - * as we want to ensure all TLB's flushed before proceeding. - */ - -void -smp_flush_tlb_all(void) -{ - on_each_cpu(flush_tlb_all_local, NULL, 1); -} - -/* * Called by secondaries to update state and initialize CPU registers. */ static void __init diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 5e05524..e767ab7 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -1,12 +1,35 @@ /* * Linux/PA-RISC Project (http://www.parisc-linux.org/) * - * System call entry code Copyright (c) Matthew Wilcox 1999 <willy@bofh.ai> + * System call entry code / Linux gateway page + * Copyright (c) Matthew Wilcox 1999 <willy@bofh.ai> * Licensed under the GNU GPL. * thanks to Philipp Rumpf, Mike Shaver and various others * sorry about the wall, puffin.. */ +/* +How does the Linux gateway page on PA-RISC work? +------------------------------------------------ +The Linux gateway page on PA-RISC is "special". +It actually has PAGE_GATEWAY bits set (this is linux terminology; in parisc +terminology it's Execute, promote to PL0) in the page map. So anything +executing on this page executes with kernel level privilege (there's more to it +than that: to have this happen, you also have to use a branch with a ,gate +completer to activate the privilege promotion). The upshot is that everything +that runs on the gateway page runs at kernel privilege but with the current +user process address space (although you have access to kernel space via %sr2). +For the 0x100 syscall entry, we redo the space registers to point to the kernel +address space (preserving the user address space in %sr3), move to wide mode if +required, save the user registers and branch into the kernel syscall entry +point. For all the other functions, we execute at kernel privilege but don't +flip address spaces. The basic upshot of this is that these code snippets are +executed atomically (because the kernel can't be pre-empted) and they may +perform architecturally forbidden (to PL3) operations (like setting control +registers). +*/ + + #include <asm/asm-offsets.h> #include <asm/unistd.h> #include <asm/errno.h> @@ -15,6 +38,7 @@ #include <asm/thread_info.h> #include <asm/assembly.h> #include <asm/processor.h> +#include <asm/cache.h> #include <linux/linkage.h> @@ -643,7 +667,7 @@ ENTRY(end_linux_gateway_page) .section .rodata,"a" - .align PAGE_SIZE + .align 8 /* Light-weight-syscall table */ /* Start of lws table. */ ENTRY(lws_table) @@ -652,13 +676,13 @@ ENTRY(lws_table) END(lws_table) /* End of lws table */ - .align PAGE_SIZE + .align 8 ENTRY(sys_call_table) #include "syscall_table.S" END(sys_call_table) #ifdef CONFIG_64BIT - .align PAGE_SIZE + .align 8 ENTRY(sys_call_table64) #define SYSCALL_TABLE_64BIT #include "syscall_table.S" @@ -674,7 +698,7 @@ END(sys_call_table64) with ldcw. */ .section .data - .align PAGE_SIZE + .align L1_CACHE_BYTES ENTRY(lws_lock_start) /* lws locks */ .rept 16 diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index f702bff..fe41a98 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -522,10 +522,10 @@ void notrace handle_interruption(int code, struct pt_regs *regs) */ if (((unsigned long)regs->iaoq[0] & 3) && ((unsigned long)regs->iasq[0] != (unsigned long)regs->sr[7])) { - /* Kill the user process later */ - regs->iaoq[0] = 0 | 3; + /* Kill the user process later */ + regs->iaoq[0] = 0 | 3; regs->iaoq[1] = regs->iaoq[0] + 4; - regs->iasq[0] = regs->iasq[1] = regs->sr[7]; + regs->iasq[0] = regs->iasq[1] = regs->sr[7]; regs->gr[0] &= ~PSW_B; return; } @@ -541,8 +541,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs) /* set up a new led state on systems shipped with a LED State panel */ pdc_chassis_send_status(PDC_CHASSIS_DIRECT_HPMC); - - parisc_terminate("High Priority Machine Check (HPMC)", + + parisc_terminate("High Priority Machine Check (HPMC)", regs, code, 0); /* NOT REACHED */ @@ -584,13 +584,13 @@ void notrace handle_interruption(int code, struct pt_regs *regs) /* Break instruction trap */ handle_break(regs); return; - + case 10: /* Privileged operation trap */ die_if_kernel("Privileged operation", regs, code); si.si_code = ILL_PRVOPC; goto give_sigill; - + case 11: /* Privileged register trap */ if ((regs->iir & 0xffdfffe0) == 0x034008a0) { @@ -634,7 +634,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs) if(user_mode(regs)){ si.si_signo = SIGFPE; /* Set to zero, and let the userspace app figure it out from - the insn pointed to by si_addr */ + the insn pointed to by si_addr */ si.si_code = 0; si.si_addr = (void __user *) regs->iaoq[0]; force_sig_info(SIGFPE, &si, current); @@ -648,7 +648,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs) die_if_kernel("Floating point exception", regs, 0); /* quiet */ handle_fpe(regs); return; - + case 15: /* Data TLB miss fault/Data page fault */ /* Fall through */ @@ -660,15 +660,15 @@ void notrace handle_interruption(int code, struct pt_regs *regs) case 17: /* Non-access data TLB miss fault/Non-access data page fault */ /* FIXME: - Still need to add slow path emulation code here! - If the insn used a non-shadow register, then the tlb + Still need to add slow path emulation code here! + If the insn used a non-shadow register, then the tlb handlers could not have their side-effect (e.g. probe writing to a target register) emulated since rfir would erase the changes to said register. Instead we have to setup everything, call this function we are in, and emulate by hand. Technically we need to emulate: fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw - */ + */ fault_address = regs->ior; fault_space = regs->isr; break; diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 64a9998..4bb095a 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -95,7 +95,7 @@ SECTIONS NOTES /* Data */ - RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, PAGE_SIZE) /* PA-RISC locks requires 16-byte alignment */ . = ALIGN(16); diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 157b931..ce939ac 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -1069,6 +1069,7 @@ void flush_tlb_all(void) { int do_recycle; + inc_irq_stat(irq_tlb_count); do_recycle = 0; spin_lock(&sid_lock); if (dirty_space_ids > RECYCLE_THRESHOLD) { @@ -1089,6 +1090,7 @@ void flush_tlb_all(void) #else void flush_tlb_all(void) { + inc_irq_stat(irq_tlb_count); spin_lock(&sid_lock); flush_tlb_all_local(NULL); recycle_sids(); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index bbbe021..c33e3ad 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -82,11 +82,6 @@ config GENERIC_HWEIGHT bool default y -config GENERIC_GPIO - bool - help - Generic GPIO API support - config PPC bool default y diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index bd40bbb..6e287f1 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -138,7 +138,6 @@ config PPC4xx_GPIO bool "PPC4xx GPIO support" depends on 40x select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help Enable gpiolib support for ppc40x based boards diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 7be9336..d6c7506 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -248,7 +248,6 @@ config PPC4xx_GPIO bool "PPC4xx GPIO support" depends on 44x select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help Enable gpiolib support for ppc440 based boards diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 8f02b05..efdd37c 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -203,7 +203,6 @@ config GE_IMP3A select DEFAULT_UIMAGE select SWIOTLB select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA help @@ -328,7 +327,7 @@ config B4_QDS select PPC_E500MC select PHYS_64BIT select SWIOTLB - select GENERIC_GPIO + select GPIOLIB select ARCH_REQUIRE_GPIOLIB select HAS_RAPIDIO select PPC_EPAPR_HV_PIC diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 7a6279e..1afd1e4 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -37,7 +37,6 @@ config GEF_PPC9A bool "GE PPC9A" select DEFAULT_UIMAGE select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA help @@ -47,7 +46,6 @@ config GEF_SBC310 bool "GE SBC310" select DEFAULT_UIMAGE select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA help @@ -57,7 +55,6 @@ config GEF_SBC610 bool "GE SBC610" select DEFAULT_UIMAGE select MMIO_NVRAM - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select GE_FPGA select HAS_RAPIDIO diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 1fb0b3c..8dec3c0 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -114,7 +114,6 @@ config 8xx_COPYBACK config 8xx_GPIO bool "GPIO API Support" - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Saying Y here will cause the ports on an MPC8xx processor to be used diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 34d224b..a881232 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -302,7 +302,6 @@ config QUICC_ENGINE config QE_GPIO bool "QE GPIO support" depends on QUICC_ENGINE - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here if you're going to use hardware that connects to the @@ -315,7 +314,6 @@ config CPM2 select PPC_LIB_RHEAP select PPC_PCI_CHOICE select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that @@ -353,7 +351,6 @@ config OF_RTC config SIMPLE_GPIO bool "Support for simple, memory-mapped GPIO controllers" depends on PPC - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here to support simple, memory-mapped GPIO controllers. @@ -364,7 +361,6 @@ config SIMPLE_GPIO config MCU_MPC8349EMITX bool "MPC8349E-mITX MCU driver" depends on I2C=y && PPC_83xx - select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here to enable soft power-off functionality on the Freescale diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index 5f7d7ba..7a539f4 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/seq_file.h> #include <linux/mount.h> +#include <linux/aio.h> #include <asm/ebcdic.h> #include "hypfs.h" diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 78d8ace..8c868cf 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -93,9 +93,6 @@ config GENERIC_CSUM config GENERIC_HWEIGHT def_bool y -config GENERIC_GPIO - def_bool n - config GENERIC_CALIBRATE_DELAY bool diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile index 8ae56e9..45d32e3 100644 --- a/arch/sh/boards/mach-sdk7786/Makefile +++ b/arch/sh/boards/mach-sdk7786/Makefile @@ -1,4 +1,4 @@ obj-y := fpga.o irq.o nmi.o setup.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile index 708c21c..0cbe3d0 100644 --- a/arch/sh/boards/mach-x3proto/Makefile +++ b/arch/sh/boards/mach-x3proto/Makefile @@ -1,3 +1,3 @@ obj-y += setup.o ilsel.o -obj-$(CONFIG_GENERIC_GPIO) += gpio.o +obj-$(CONFIG_GPIOLIB) += gpio.o diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 7fdc102..990195d 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -21,4 +21,4 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7203) := pinmux-sh7203.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7264) := pinmux-sh7264.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7269) := pinmux-sh7269.o -obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) +obj-$(CONFIG_GPIOLIB) += $(pinmux-y) diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 6f13f33..d3634ae 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -30,4 +30,4 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7712) := clock-sh7712.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7720) := pinmux-sh7720.o obj-y += $(clock-y) -obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) +obj-$(CONFIG_GPIOLIB) += $(pinmux-y) diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 8fc6ec2..0705df7 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -47,6 +47,6 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SHX3) := pinmux-shx3.o obj-y += $(clock-y) obj-$(CONFIG_SMP) += $(smp-y) -obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y) +obj-$(CONFIG_GPIOLIB) += $(pinmux-y) obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += ubc.o diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index a639c0d..9ac9f16 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -137,11 +137,6 @@ config GENERIC_ISA_DMA bool default y if SPARC32 -config GENERIC_GPIO - bool - help - Generic GPIO API support - config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y if SPARC64 diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c index 9b40c9c..6cfc1b0 100644 --- a/arch/sparc/kernel/leon_smp.c +++ b/arch/sparc/kernel/leon_smp.c @@ -253,24 +253,15 @@ void __init leon_smp_done(void) /* Free unneeded trap tables */ if (!cpu_present(1)) { - ClearPageReserved(virt_to_page(&trapbase_cpu1)); - init_page_count(virt_to_page(&trapbase_cpu1)); - free_page((unsigned long)&trapbase_cpu1); - totalram_pages++; + free_reserved_page(virt_to_page(&trapbase_cpu1)); num_physpages++; } if (!cpu_present(2)) { - ClearPageReserved(virt_to_page(&trapbase_cpu2)); - init_page_count(virt_to_page(&trapbase_cpu2)); - free_page((unsigned long)&trapbase_cpu2); - totalram_pages++; + free_reserved_page(virt_to_page(&trapbase_cpu2)); num_physpages++; } if (!cpu_present(3)) { - ClearPageReserved(virt_to_page(&trapbase_cpu3)); - init_page_count(virt_to_page(&trapbase_cpu3)); - free_page((unsigned long)&trapbase_cpu3); - totalram_pages++; + free_reserved_page(virt_to_page(&trapbase_cpu3)); num_physpages++; } /* Ok, they are spinning and ready to go. */ diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c index 4490c39..af472cf 100644 --- a/arch/sparc/mm/init_32.c +++ b/arch/sparc/mm/init_32.c @@ -366,45 +366,14 @@ void __init mem_init(void) void free_initmem (void) { - unsigned long addr; - unsigned long freed; - - addr = (unsigned long)(&__init_begin); - freed = (unsigned long)(&__init_end) - addr; - for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { - struct page *p; - - memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); - p = virt_to_page(addr); - - ClearPageReserved(p); - init_page_count(p); - __free_page(p); - totalram_pages++; - num_physpages++; - } - printk(KERN_INFO "Freeing unused kernel memory: %ldk freed\n", - freed >> 10); + num_physpages += free_initmem_default(POISON_FREE_INITMEM); } #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { - if (start < end) - printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", - (end - start) >> 10); - for (; start < end; start += PAGE_SIZE) { - struct page *p; - - memset((void *)start, POISON_FREE_INITMEM, PAGE_SIZE); - p = virt_to_page(start); - - ClearPageReserved(p); - init_page_count(p); - __free_page(p); - totalram_pages++; - num_physpages++; - } + num_physpages += free_reserved_area(start, end, POISON_FREE_INITMEM, + "initrd"); } #endif diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index cf72a8a..a717199 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2059,8 +2059,7 @@ void __init mem_init(void) /* We subtract one to account for the mem_map_zero page * allocated below. */ - totalram_pages -= 1; - num_physpages = totalram_pages; + num_physpages = totalram_pages - 1; /* * Set up the zero page, mark it reserved, so that page count @@ -2071,7 +2070,7 @@ void __init mem_init(void) prom_printf("paging_init: Cannot alloc zero page.\n"); prom_halt(); } - SetPageReserved(mem_map_zero); + mark_page_reserved(mem_map_zero); codepages = (((unsigned long) _etext) - ((unsigned long) _start)); codepages = PAGE_ALIGN(codepages) >> PAGE_SHIFT; @@ -2111,37 +2110,22 @@ void free_initmem(void) initend = (unsigned long)(__init_end) & PAGE_MASK; for (; addr < initend; addr += PAGE_SIZE) { unsigned long page; - struct page *p; page = (addr + ((unsigned long) __va(kern_base)) - ((unsigned long) KERNBASE)); memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); - if (do_free) { - p = virt_to_page(page); - - ClearPageReserved(p); - init_page_count(p); - __free_page(p); - totalram_pages++; - } + if (do_free) + free_reserved_page(virt_to_page(page)); } } #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { - if (start < end) - printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); - for (; start < end; start += PAGE_SIZE) { - struct page *p = virt_to_page(start); - - ClearPageReserved(p); - init_page_count(p); - __free_page(p); - totalram_pages++; - } + num_physpages += free_reserved_area(start, end, POISON_FREE_INITMEM, + "initrd"); } #endif diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 41bf720..879990c 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -87,7 +87,7 @@ static DEFINE_MUTEX(ubd_lock); static DEFINE_MUTEX(ubd_mutex); /* replaces BKL, might not be needed */ static int ubd_open(struct block_device *bdev, fmode_t mode); -static int ubd_release(struct gendisk *disk, fmode_t mode); +static void ubd_release(struct gendisk *disk, fmode_t mode); static int ubd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg); static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo); @@ -1138,7 +1138,7 @@ out: return err; } -static int ubd_release(struct gendisk *disk, fmode_t mode) +static void ubd_release(struct gendisk *disk, fmode_t mode) { struct ubd *ubd_dev = disk->private_data; @@ -1146,7 +1146,6 @@ static int ubd_release(struct gendisk *disk, fmode_t mode) if(--ubd_dev->count == 0) ubd_close_dev(ubd_dev); mutex_unlock(&ubd_mutex); - return 0; } static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask, diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 2943e3a..41bcc00 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -23,9 +23,6 @@ config UNICORE32 designs licensed by PKUnity Ltd. Please see web page at <http://www.pkunity.com/>. -config GENERIC_GPIO - def_bool y - config GENERIC_CSUM def_bool y @@ -156,7 +153,7 @@ source "mm/Kconfig" config LEDS def_bool y - depends on GENERIC_GPIO + depends on GPIOLIB config ALIGNMENT_TRAP def_bool y @@ -219,7 +216,6 @@ if ARCH_PUV3 config PUV3_GPIO bool depends on !ARCH_FPGA - select GENERIC_GPIO select GPIO_SYSFS default y diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5db2117..6a154a9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -174,9 +174,6 @@ config GENERIC_BUG_RELATIVE_POINTERS config GENERIC_HWEIGHT def_bool y -config GENERIC_GPIO - bool - config ARCH_MAY_HAVE_PC_FDC def_bool y depends on ISA_DMA_API diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c index 6eb18c4..0e0fabf 100644 --- a/arch/x86/pci/mrst.c +++ b/arch/x86/pci/mrst.c @@ -141,6 +141,11 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, */ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) { + if (bus == 0 && (devfn == PCI_DEVFN(2, 0) + || devfn == PCI_DEVFN(0, 0) + || devfn == PCI_DEVFN(3, 0))) + return 1; + /* This is a workaround for A0 LNC bug where PCI status register does * not have new CAP bit set. can not be written by SW either. * @@ -150,10 +155,7 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) */ if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE) return 0; - if (bus == 0 && (devfn == PCI_DEVFN(2, 0) - || devfn == PCI_DEVFN(0, 0) - || devfn == PCI_DEVFN(3, 0))) - return 1; + return 0; /* langwell on others */ } diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index b09de49..acdfc61 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -33,9 +33,6 @@ config RWSEM_XCHGADD_ALGORITHM config GENERIC_HWEIGHT def_bool y -config GENERIC_GPIO - bool - config ARCH_HAS_ILOG2_U32 def_bool n diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig index ddab37b..77c52f8 100644 --- a/arch/xtensa/configs/iss_defconfig +++ b/arch/xtensa/configs/iss_defconfig @@ -10,7 +10,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_NO_IOPORT=y diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index eaf1b8f..4799c6a 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -10,7 +10,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_NO_IOPORT=y diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c index 88608cc..0345f43 100644 --- a/arch/xtensa/platforms/iss/simdisk.c +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -139,13 +139,12 @@ static int simdisk_open(struct block_device *bdev, fmode_t mode) return 0; } -static int simdisk_release(struct gendisk *disk, fmode_t mode) +static void simdisk_release(struct gendisk *disk, fmode_t mode) { struct simdisk *dev = disk->private_data; spin_lock(&dev->lock); --dev->users; spin_unlock(&dev->lock); - return 0; } static const struct block_device_operations simdisk_ops = { |