diff options
Diffstat (limited to 'drivers/net/irda/vlsi_ir.c')
| -rw-r--r-- | drivers/net/irda/vlsi_ir.c | 1912 |
1 files changed, 1912 insertions, 0 deletions
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c new file mode 100644 index 0000000..35fad81 --- /dev/null +++ b/drivers/net/irda/vlsi_ir.c @@ -0,0 +1,1912 @@ +/********************************************************************* + * + * vlsi_ir.c: VLSI82C147 PCI IrDA controller driver for Linux + * + * Copyright (c) 2001-2003 Martin Diehl + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ********************************************************************/ + +#include <linux/config.h> +#include <linux/module.h> + +#define DRIVER_NAME "vlsi_ir" +#define DRIVER_VERSION "v0.5" +#define DRIVER_DESCRIPTION "IrDA SIR/MIR/FIR driver for VLSI 82C147" +#define DRIVER_AUTHOR "Martin Diehl <info@mdiehl.de>" + +MODULE_DESCRIPTION(DRIVER_DESCRIPTION); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); + +/********************************************************/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/netdevice.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/time.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/smp_lock.h> +#include <asm/uaccess.h> +#include <asm/byteorder.h> + +#include <net/irda/irda.h> +#include <net/irda/irda_device.h> +#include <net/irda/wrapper.h> +#include <net/irda/crc.h> + +#include "vlsi_ir.h" + +/********************************************************/ + +static /* const */ char drivername[] = DRIVER_NAME; + +static struct pci_device_id vlsi_irda_table [] = { + { + .class = PCI_CLASS_WIRELESS_IRDA << 8, + .class_mask = PCI_CLASS_SUBCLASS_MASK << 8, + .vendor = PCI_VENDOR_ID_VLSI, + .device = PCI_DEVICE_ID_VLSI_82C147, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { /* all zeroes */ } +}; + +MODULE_DEVICE_TABLE(pci, vlsi_irda_table); + +/********************************************************/ + +/* clksrc: which clock source to be used + * 0: auto - try PLL, fallback to 40MHz XCLK + * 1: on-chip 48MHz PLL + * 2: external 48MHz XCLK + * 3: external 40MHz XCLK (HP OB-800) + */ + +static int clksrc = 0; /* default is 0(auto) */ +module_param(clksrc, int, 0); +MODULE_PARM_DESC(clksrc, "clock input source selection"); + +/* ringsize: size of the tx and rx descriptor rings + * independent for tx and rx + * specify as ringsize=tx[,rx] + * allowed values: 4, 8, 16, 32, 64 + * Due to the IrDA 1.x max. allowed window size=7, + * there should be no gain when using rings larger than 8 + */ + +static int ringsize[] = {8,8}; /* default is tx=8 / rx=8 */ +module_param_array(ringsize, int, NULL, 0); +MODULE_PARM_DESC(ringsize, "TX, RX ring descriptor size"); + +/* sirpulse: tuning of the SIR pulse width within IrPHY 1.3 limits + * 0: very short, 1.5us (exception: 6us at 2.4 kbaud) + * 1: nominal 3/16 bittime width + * note: IrDA compliant peer devices should be happy regardless + * which one is used. Primary goal is to save some power + * on the sender's side - at 9.6kbaud for example the short + * pulse width saves more than 90% of the transmitted IR power. + */ + +static int sirpulse = 1; /* default is 3/16 bittime */ +module_param(sirpulse, int, 0); +MODULE_PARM_DESC(sirpulse, "SIR pulse width tuning"); + +/* qos_mtt_bits: encoded min-turn-time value we require the peer device + * to use before transmitting to us. "Type 1" (per-station) + * bitfield according to IrLAP definition (section 6.6.8) + * Don't know which transceiver is used by my OB800 - the + * pretty common HP HDLS-1100 requires 1 msec - so lets use this. + */ + +static int qos_mtt_bits = 0x07; /* default is 1 ms or more */ +module_param(qos_mtt_bits, int, 0); +MODULE_PARM_DESC(qos_mtt_bits, "IrLAP bitfield representing min-turn-time"); + +/********************************************************/ + +static void vlsi_reg_debug(unsigned iobase, const char *s) +{ + int i; + + printk(KERN_DEBUG "%s: ", s); + for (i = 0; i < 0x20; i++) + printk("%02x", (unsigned)inb((iobase+i))); + printk("\n"); +} + +static void vlsi_ring_debug(struct vlsi_ring *r) +{ + struct ring_descr *rd; + unsigned i; + + printk(KERN_DEBUG "%s - ring %p / size %u / mask 0x%04x / len %u / dir %d / hw %p\n", + __FUNCTION__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw); + printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __FUNCTION__, + atomic_read(&r->head) & r->mask, atomic_read(&r->tail) & r->mask); + for (i = 0; i < r->size; i++) { + rd = &r->rd[i]; + printk(KERN_DEBUG "%s - ring descr %u: ", __FUNCTION__, i); + printk("skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw); + printk(KERN_DEBUG "%s - hw: status=%02x count=%u addr=0x%08x\n", + __FUNCTION__, (unsigned) rd_get_status(rd), + (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd)); + } +} + +/********************************************************/ + +/* needed regardless of CONFIG_PROC_FS */ +static struct proc_dir_entry *vlsi_proc_root = NULL; + +#ifdef CONFIG_PROC_FS + +static void vlsi_proc_pdev(struct seq_file *seq, struct pci_dev *pdev) +{ + unsigned iobase = pci_resource_start(pdev, 0); + unsigned i; + + seq_printf(seq, "\n%s (vid/did: %04x/%04x)\n", + PCIDEV_NAME(pdev), (int)pdev->vendor, (int)pdev->device); + seq_printf(seq, "pci-power-state: %u\n", (unsigned) pdev->current_state); + seq_printf(seq, "resources: irq=%u / io=0x%04x / dma_mask=0x%016Lx\n", + pdev->irq, (unsigned)pci_resource_start(pdev, 0), (unsigned long long)pdev->dma_mask); + seq_printf(seq, "hw registers: "); + for (i = 0; i < 0x20; i++) + seq_printf(seq, "%02x", (unsigned)inb((iobase+i))); + seq_printf(seq, "\n"); +} + +static void vlsi_proc_ndev(struct seq_file *seq, struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + u8 byte; + u16 word; + unsigned delta1, delta2; + struct timeval now; + unsigned iobase = ndev->base_addr; + + seq_printf(seq, "\n%s link state: %s / %s / %s / %s\n", ndev->name, + netif_device_present(ndev) ? "attached" : "detached", + netif_running(ndev) ? "running" : "not running", + netif_carrier_ok(ndev) ? "carrier ok" : "no carrier", + netif_queue_stopped(ndev) ? "queue stopped" : "queue running"); + + if (!netif_running(ndev)) + return; + + seq_printf(seq, "\nhw-state:\n"); + pci_read_config_byte(idev->pdev, VLSI_PCI_IRMISC, &byte); + seq_printf(seq, "IRMISC:%s%s%s uart%s", + (byte&IRMISC_IRRAIL) ? " irrail" : "", + (byte&IRMISC_IRPD) ? " irpd" : "", + (byte&IRMISC_UARTTST) ? " uarttest" : "", + (byte&IRMISC_UARTEN) ? "@" : " disabled\n"); + if (byte&IRMISC_UARTEN) { + seq_printf(seq, "0x%s\n", + (byte&2) ? ((byte&1) ? "3e8" : "2e8") + : ((byte&1) ? "3f8" : "2f8")); + } + pci_read_config_byte(idev->pdev, VLSI_PCI_CLKCTL, &byte); + seq_printf(seq, "CLKCTL: PLL %s%s%s / clock %s / wakeup %s\n", + (byte&CLKCTL_PD_INV) ? "powered" : "down", + (byte&CLKCTL_LOCK) ? " locked" : "", + (byte&CLKCTL_EXTCLK) ? ((byte&CLKCTL_XCKSEL)?" / 40 MHz XCLK":" / 48 MHz XCLK") : "", + (byte&CLKCTL_CLKSTP) ? "stopped" : "running", + (byte&CLKCTL_WAKE) ? "enabled" : "disabled"); + pci_read_config_byte(idev->pdev, VLSI_PCI_MSTRPAGE, &byte); + seq_printf(seq, "MSTRPAGE: 0x%02x\n", (unsigned)byte); + + byte = inb(iobase+VLSI_PIO_IRINTR); + seq_printf(seq, "IRINTR:%s%s%s%s%s%s%s%s\n", + (byte&IRINTR_ACTEN) ? " ACTEN" : "", + (byte&IRINTR_RPKTEN) ? " RPKTEN" : "", + (byte&IRINTR_TPKTEN) ? " TPKTEN" : "", + (byte&IRINTR_OE_EN) ? " OE_EN" : "", + (byte&IRINTR_ACTIVITY) ? " ACTIVITY" : "", + (byte&IRINTR_RPKTINT) ? " RPKTINT" : "", + (byte&IRINTR_TPKTINT) ? " TPKTINT" : "", + (byte&IRINTR_OE_INT) ? " OE_INT" : ""); + word = inw(iobase+VLSI_PIO_RINGPTR); + seq_printf(seq, "RINGPTR: rx=%u / tx=%u\n", RINGPTR_GET_RX(word), RINGPTR_GET_TX(word)); + word = inw(iobase+VLSI_PIO_RINGBASE); + seq_printf(seq, "RINGBASE: busmap=0x%08x\n", + ((unsigned)word << 10)|(MSTRPAGE_VALUE<<24)); + word = inw(iobase+VLSI_PIO_RINGSIZE); + seq_printf(seq, "RINGSIZE: rx=%u / tx=%u\n", RINGSIZE_TO_RXSIZE(word), + RINGSIZE_TO_TXSIZE(word)); + + word = inw(iobase+VLSI_PIO_IRCFG); + seq_printf(seq, "IRCFG:%s%s%s%s%s%s%s%s%s%s%s%s%s\n", + (word&IRCFG_LOOP) ? " LOOP" : "", + (word&IRCFG_ENTX) ? " ENTX" : "", + (word&IRCFG_ENRX) ? " ENRX" : "", + (word&IRCFG_MSTR) ? " MSTR" : "", + (word&IRCFG_RXANY) ? " RXANY" : "", + (word&IRCFG_CRC16) ? " CRC16" : "", + (word&IRCFG_FIR) ? " FIR" : "", + (word&IRCFG_MIR) ? " MIR" : "", + (word&IRCFG_SIR) ? " SIR" : "", + (word&IRCFG_SIRFILT) ? " SIRFILT" : "", + (word&IRCFG_SIRTEST) ? " SIRTEST" : "", + (word&IRCFG_TXPOL) ? " TXPOL" : "", + (word&IRCFG_RXPOL) ? " RXPOL" : ""); + word = inw(iobase+VLSI_PIO_IRENABLE); + seq_printf(seq, "IRENABLE:%s%s%s%s%s%s%s%s\n", + (word&IRENABLE_PHYANDCLOCK) ? " PHYANDCLOCK" : "", + (word&IRENABLE_CFGER) ? " CFGERR" : "", + (word&IRENABLE_FIR_ON) ? " FIR_ON" : "", + (word&IRENABLE_MIR_ON) ? " MIR_ON" : "", + (word&IRENABLE_SIR_ON) ? " SIR_ON" : "", + (word&IRENABLE_ENTXST) ? " ENTXST" : "", + (word&IRENABLE_ENRXST) ? " ENRXST" : "", + (word&IRENABLE_CRC16_ON) ? " CRC16_ON" : ""); + word = inw(iobase+VLSI_PIO_PHYCTL); + seq_printf(seq, "PHYCTL: baud-divisor=%u / pulsewidth=%u / preamble=%u\n", + (unsigned)PHYCTL_TO_BAUD(word), + (unsigned)PHYCTL_TO_PLSWID(word), + (unsigned)PHYCTL_TO_PREAMB(word)); + word = inw(iobase+VLSI_PIO_NPHYCTL); + seq_printf(seq, "NPHYCTL: baud-divisor=%u / pulsewidth=%u / preamble=%u\n", + (unsigned)PHYCTL_TO_BAUD(word), + (unsigned)PHYCTL_TO_PLSWID(word), + (unsigned)PHYCTL_TO_PREAMB(word)); + word = inw(iobase+VLSI_PIO_MAXPKT); + seq_printf(seq, "MAXPKT: max. rx packet size = %u\n", word); + word = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; + seq_printf(seq, "RCVBCNT: rx-fifo filling level = %u\n", word); + + seq_printf(seq, "\nsw-state:\n"); + seq_printf(seq, "IrPHY setup: %d baud - %s encoding\n", idev->baud, + (idev->mode==IFF_SIR)?"SIR":((idev->mode==IFF_MIR)?"MIR":"FIR")); + do_gettimeofday(&now); + if (now.tv_usec >= idev->last_rx.tv_usec) { + delta2 = now.tv_usec - idev->last_rx.tv_usec; + delta1 = 0; + } + else { + delta2 = 1000000 + now.tv_usec - idev->last_rx.tv_usec; + delta1 = 1; + } + seq_printf(seq, "last rx: %lu.%06u sec\n", + now.tv_sec - idev->last_rx.tv_sec - delta1, delta2); + + seq_printf(seq, "RX: packets=%lu / bytes=%lu / errors=%lu / dropped=%lu", + idev->stats.rx_packets, idev->stats.rx_bytes, idev->stats.rx_errors, + idev->stats.rx_dropped); + seq_printf(seq, " / overrun=%lu / length=%lu / frame=%lu / crc=%lu\n", + idev->stats.rx_over_errors, idev->stats.rx_length_errors, + idev->stats.rx_frame_errors, idev->stats.rx_crc_errors); + seq_printf(seq, "TX: packets=%lu / bytes=%lu / errors=%lu / dropped=%lu / fifo=%lu\n", + idev->stats.tx_packets, idev->stats.tx_bytes, idev->stats.tx_errors, + idev->stats.tx_dropped, idev->stats.tx_fifo_errors); + +} + +static void vlsi_proc_ring(struct seq_file *seq, struct vlsi_ring *r) +{ + struct ring_descr *rd; + unsigned i, j; + int h, t; + + seq_printf(seq, "size %u / mask 0x%04x / len %u / dir %d / hw %p\n", + r->size, r->mask, r->len, r->dir, r->rd[0].hw); + h = atomic_read(&r->head) & r->mask; + t = atomic_read(&r->tail) & r->mask; + seq_printf(seq, "head = %d / tail = %d ", h, t); + if (h == t) + seq_printf(seq, "(empty)\n"); + else { + if (((t+1)&r->mask) == h) + seq_printf(seq, "(full)\n"); + else + seq_printf(seq, "(level = %d)\n", ((unsigned)(t-h) & r->mask)); + rd = &r->rd[h]; + j = (unsigned) rd_get_count(rd); + seq_printf(seq, "current: rd = %d / status = %02x / len = %u\n", + h, (unsigned)rd_get_status(rd), j); + if (j > 0) { + seq_printf(seq, " data:"); + if (j > 20) + j = 20; + for (i = 0; i < j; i++) + seq_printf(seq, " %02x", (unsigned)((unsigned char *)rd->buf)[i]); + seq_printf(seq, "\n"); + } + } + for (i = 0; i < r->size; i++) { + rd = &r->rd[i]; + seq_printf(seq, "> ring descr %u: ", i); + seq_printf(seq, "skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw); + seq_printf(seq, " hw: status=%02x count=%u busaddr=0x%08x\n", + (unsigned) rd_get_status(rd), + (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd)); + } +} + +static int vlsi_seq_show(struct seq_file *seq, void *v) +{ + struct net_device *ndev = seq->private; + vlsi_irda_dev_t *idev = ndev->priv; + unsigned long flags; + + seq_printf(seq, "\n%s %s\n\n", DRIVER_NAME, DRIVER_VERSION); + seq_printf(seq, "clksrc: %s\n", + (clksrc>=2) ? ((clksrc==3)?"40MHz XCLK":"48MHz XCLK") + : ((clksrc==1)?"48MHz PLL":"autodetect")); + seq_printf(seq, "ringsize: tx=%d / rx=%d\n", + ringsize[0], ringsize[1]); + seq_printf(seq, "sirpulse: %s\n", (sirpulse)?"3/16 bittime":"short"); + seq_printf(seq, "qos_mtt_bits: 0x%02x\n", (unsigned)qos_mtt_bits); + + spin_lock_irqsave(&idev->lock, flags); + if (idev->pdev != NULL) { + vlsi_proc_pdev(seq, idev->pdev); + + if (idev->pdev->current_state == 0) + vlsi_proc_ndev(seq, ndev); + else + seq_printf(seq, "\nPCI controller down - resume_ok = %d\n", + idev->resume_ok); + if (netif_running(ndev) && idev->rx_ring && idev->tx_ring) { + seq_printf(seq, "\n--------- RX ring -----------\n\n"); + vlsi_proc_ring(seq, idev->rx_ring); + seq_printf(seq, "\n--------- TX ring -----------\n\n"); + vlsi_proc_ring(seq, idev->tx_ring); + } + } + seq_printf(seq, "\n"); + spin_unlock_irqrestore(&idev->lock, flags); + + return 0; +} + +static int vlsi_seq_open(struct inode *inode, struct file *file) +{ + return single_open(file, vlsi_seq_show, PDE(inode)->data); +} + +static struct file_operations vlsi_proc_fops = { + .owner = THIS_MODULE, + .open = vlsi_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +#define VLSI_PROC_FOPS (&vlsi_proc_fops) + +#else /* CONFIG_PROC_FS */ +#define VLSI_PROC_FOPS NULL +#endif + +/********************************************************/ + +static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr_hw *hwmap, + unsigned size, unsigned len, int dir) +{ + struct vlsi_ring *r; + struct ring_descr *rd; + unsigned i, j; + dma_addr_t busaddr; + + if (!size || ((size-1)&size)!=0) /* must be >0 and power of 2 */ + return NULL; + + r = kmalloc(sizeof(*r) + size * sizeof(struct ring_descr), GFP_KERNEL); + if (!r) + return NULL; + memset(r, 0, sizeof(*r)); + + r->pdev = pdev; + r->dir = dir; + r->len = len; + r->rd = (struct ring_descr *)(r+1); + r->mask = size - 1; + r->size = size; + atomic_set(&r->head, 0); + atomic_set(&r->tail, 0); + + for (i = 0; i < size; i++) { + rd = r->rd + i; + memset(rd, 0, sizeof(*rd)); + rd->hw = hwmap + i; + rd->buf = kmalloc(len, GFP_KERNEL|GFP_DMA); + if (rd->buf == NULL + || !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) { + if (rd->buf) { + IRDA_ERROR("%s: failed to create PCI-MAP for %p", + __FUNCTION__, rd->buf); + kfree(rd->buf); + rd->buf = NULL; + } + for (j = 0; j < i; j++) { + rd = r->rd + j; + busaddr = rd_get_addr(rd); + rd_set_addr_status(rd, 0, 0); + if (busaddr) + pci_unmap_single(pdev, busaddr, len, dir); + kfree(rd->buf); + rd->buf = NULL; + } + kfree(r); + return NULL; + } + rd_set_addr_status(rd, busaddr, 0); + /* initially, the dma buffer is owned by the CPU */ + rd->skb = NULL; + } + return r; +} + +static int vlsi_free_ring(struct vlsi_ring *r) +{ + struct ring_descr *rd; + unsigned i; + dma_addr_t busaddr; + + for (i = 0; i < r->size; i++) { + rd = r->rd + i; + if (rd->skb) + dev_kfree_skb_any(rd->skb); + busaddr = rd_get_addr(rd); + rd_set_addr_status(rd, 0, 0); + if (busaddr) + pci_unmap_single(r->pdev, busaddr, r->len, r->dir); + if (rd->buf) + kfree(rd->buf); + } + kfree(r); + return 0; +} + +static int vlsi_create_hwif(vlsi_irda_dev_t *idev) +{ + char *ringarea; + struct ring_descr_hw *hwmap; + + idev->virtaddr = NULL; + idev->busaddr = 0; + + ringarea = pci_alloc_consistent(idev->pdev, HW_RING_AREA_SIZE, &idev->busaddr); + if (!ringarea) { + IRDA_ERROR("%s: insufficient memory for descriptor rings\n", + __FUNCTION__); + goto out; + } + memset(ringarea, 0, HW_RING_AREA_SIZE); + + hwmap = (struct ring_descr_hw *)ringarea; + idev->rx_ring = vlsi_alloc_ring(idev->pdev, hwmap, ringsize[1], + XFER_BUF_SIZE, PCI_DMA_FROMDEVICE); + if (idev->rx_ring == NULL) + goto out_unmap; + + hwmap += MAX_RING_DESCR; + idev->tx_ring = vlsi_alloc_ring(idev->pdev, hwmap, ringsize[0], + XFER_BUF_SIZE, PCI_DMA_TODEVICE); + if (idev->tx_ring == NULL) + goto out_free_rx; + + idev->virtaddr = ringarea; + return 0; + +out_free_rx: + vlsi_free_ring(idev->rx_ring); +out_unmap: + idev->rx_ring = idev->tx_ring = NULL; + pci_free_consistent(idev->pdev, HW_RING_AREA_SIZE, ringarea, idev->busaddr); + idev->busaddr = 0; +out: + return -ENOMEM; +} + +static int vlsi_destroy_hwif(vlsi_irda_dev_t *idev) +{ + vlsi_free_ring(idev->rx_ring); + vlsi_free_ring(idev->tx_ring); + idev->rx_ring = idev->tx_ring = NULL; + + if (idev->busaddr) + pci_free_consistent(idev->pdev,HW_RING_AREA_SIZE,idev->virtaddr,idev->busaddr); + + idev->virtaddr = NULL; + idev->busaddr = 0; + + return 0; +} + +/********************************************************/ + +static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd) +{ + u16 status; + int crclen, len = 0; + struct sk_buff *skb; + int ret = 0; + struct net_device *ndev = (struct net_device *)pci_get_drvdata(r->pdev); + vlsi_irda_dev_t *idev = ndev->priv; + + pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir); + /* dma buffer now owned by the CPU */ + status = rd_get_status(rd); + if (status & RD_RX_ERROR) { + if (status & RD_RX_OVER) + ret |= VLSI_RX_OVER; + if (status & RD_RX_LENGTH) + ret |= VLSI_RX_LENGTH; + if (status & RD_RX_PHYERR) + ret |= VLSI_RX_FRAME; + if (status & RD_RX_CRCERR) + ret |= VLSI_RX_CRC; + goto done; + } + + len = rd_get_count(rd); + crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16); + len -= crclen; /* remove trailing CRC */ + if (len <= 0) { + IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __FUNCTION__, len); + ret |= VLSI_RX_DROP; + goto done; + } + + if (idev->mode == IFF_SIR) { /* hw checks CRC in MIR, FIR mode */ + + /* rd->buf is a streaming PCI_DMA_FROMDEVICE map. Doing the + * endian-adjustment there just in place will dirty a cache line + * which belongs to the map and thus we must be sure it will + * get flushed before giving the buffer back to hardware. + * vlsi_fill_rx() will do this anyway - but here we rely on. + */ + le16_to_cpus(rd->buf+len); + if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) { + IRDA_DEBUG(0, "%s: crc error\n", __FUNCTION__); + ret |= VLSI_RX_CRC; + goto done; + } + } + + if (!rd->skb) { + IRDA_WARNING("%s: rx packet lost\n", __FUNCTION__); + ret |= VLSI_RX_DROP; + goto done; + } + + skb = rd->skb; + rd->skb = NULL; + skb->dev = ndev; + memcpy(skb_put(skb,len), rd->buf, len); + skb->mac.raw = skb->data; + if (in_interrupt()) + netif_rx(skb); + else + netif_rx_ni(skb); + ndev->last_rx = jiffies; + +done: + rd_set_status(rd, 0); + rd_set_count(rd, 0); + /* buffer still owned by CPU */ + + return (ret) ? -ret : len; +} + +static void vlsi_fill_rx(struct vlsi_ring *r) +{ + struct ring_descr *rd; + + for (rd = ring_last(r); rd != NULL; rd = ring_put(r)) { + if (rd_is_active(rd)) { + IRDA_WARNING("%s: driver bug: rx descr race with hw\n", + __FUNCTION__); + vlsi_ring_debug(r); + break; + } + if (!rd->skb) { + rd->skb = dev_alloc_skb(IRLAP_SKB_ALLOCSIZE); + if (rd->skb) { + skb_reserve(rd->skb,1); + rd->skb->protocol = htons(ETH_P_IRDA); + } + else + break; /* probably not worth logging? */ + } + /* give dma buffer back to busmaster */ + pci_dma_sync_single_for_device(r->pdev, rd_get_addr(rd), r->len, r->dir); + rd_activate(rd); + } +} + +static void vlsi_rx_interrupt(struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + struct vlsi_ring *r = idev->rx_ring; + struct ring_descr *rd; + int ret; + + for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) { + + if (rd_is_active(rd)) + break; + + ret = vlsi_process_rx(r, rd); + + if (ret < 0) { + ret = -ret; + idev->stats.rx_errors++; + if (ret & VLSI_RX_DROP) + idev->stats.rx_dropped++; + if (ret & VLSI_RX_OVER) + idev->stats.rx_over_errors++; + if (ret & VLSI_RX_LENGTH) + idev->stats.rx_length_errors++; + if (ret & VLSI_RX_FRAME) + idev->stats.rx_frame_errors++; + if (ret & VLSI_RX_CRC) + idev->stats.rx_crc_errors++; + } + else if (ret > 0) { + idev->stats.rx_packets++; + idev->stats.rx_bytes += ret; + } + } + + do_gettimeofday(&idev->last_rx); /* remember "now" for later mtt delay */ + + vlsi_fill_rx(r); + + if (ring_first(r) == NULL) { + /* we are in big trouble, if this should ever happen */ + IRDA_ERROR("%s: rx ring exhausted!\n", __FUNCTION__); + vlsi_ring_debug(r); + } + else + outw(0, ndev->base_addr+VLSI_PIO_PROMPT); +} + +/* caller must have stopped the controller from busmastering */ + +static void vlsi_unarm_rx(vlsi_irda_dev_t *idev) +{ + struct vlsi_ring *r = idev->rx_ring; + struct ring_descr *rd; + int ret; + + for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) { + + ret = 0; + if (rd_is_active(rd)) { + rd_set_status(rd, 0); + if (rd_get_count(rd)) { + IRDA_DEBUG(0, "%s - dropping rx packet\n", __FUNCTION__); + ret = -VLSI_RX_DROP; + } + rd_set_count(rd, 0); + pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir); + if (rd->skb) { + dev_kfree_skb_any(rd->skb); + rd->skb = NULL; + } + } + else + ret = vlsi_process_rx(r, rd); + + if (ret < 0) { + ret = -ret; + idev->stats.rx_errors++; + if (ret & VLSI_RX_DROP) + idev->stats.rx_dropped++; + if (ret & VLSI_RX_OVER) + idev->stats.rx_over_errors++; + if (ret & VLSI_RX_LENGTH) + idev->stats.rx_length_errors++; + if (ret & VLSI_RX_FRAME) + idev->stats.rx_frame_errors++; + if (ret & VLSI_RX_CRC) + idev->stats.rx_crc_errors++; + } + else if (ret > 0) { + idev->stats.rx_packets++; + idev->stats.rx_bytes += ret; + } + } +} + +/********************************************************/ + +static int vlsi_process_tx(struct vlsi_ring *r, struct ring_descr *rd) +{ + u16 status; + int len; + int ret; + + pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir); + /* dma buffer now owned by the CPU */ + status = rd_get_status(rd); + if (status & RD_TX_UNDRN) + ret = VLSI_TX_FIFO; + else + ret = 0; + rd_set_status(rd, 0); + + if (rd->skb) { + len = rd->skb->len; + dev_kfree_skb_any(rd->skb); + rd->skb = NULL; + } + else /* tx-skb already freed? - should never happen */ + len = rd_get_count(rd); /* incorrect for SIR! (due to wrapping) */ + + rd_set_count(rd, 0); + /* dma buffer still owned by the CPU */ + + return (ret) ? -ret : len; +} + +static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) +{ + u16 nphyctl; + u16 config; + unsigned mode; + int ret; + int baudrate; + int fifocnt; + + baudrate = idev->new_baud; + IRDA_DEBUG(2, "%s: %d -> %d\n", __FUNCTION__, idev->baud, idev->new_baud); + if (baudrate == 4000000) { + mode = IFF_FIR; + config = IRCFG_FIR; + nphyctl = PHYCTL_FIR; + } + else if (baudrate == 1152000) { + mode = IFF_MIR; + config = IRCFG_MIR | IRCFG_CRC16; + nphyctl = PHYCTL_MIR(clksrc==3); + } + else { + mode = IFF_SIR; + config = IRCFG_SIR | IRCFG_SIRFILT | IRCFG_RXANY; + switch(baudrate) { + default: + IRDA_WARNING("%s: undefined baudrate %d - fallback to 9600!\n", + __FUNCTION__, baudrate); + baudrate = 9600; + /* fallthru */ + case 2400: + case 9600: + case 19200: + case 38400: + case 57600: + case 115200: + nphyctl = PHYCTL_SIR(baudrate,sirpulse,clksrc==3); + break; + } + } + config |= IRCFG_MSTR | IRCFG_ENRX; + + fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; + if (fifocnt != 0) { + IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt); + } + + outw(0, iobase+VLSI_PIO_IRENABLE); + outw(config, iobase+VLSI_PIO_IRCFG); + outw(nphyctl, iobase+VLSI_PIO_NPHYCTL); + wmb(); + outw(IRENABLE_PHYANDCLOCK, iobase+VLSI_PIO_IRENABLE); + mb(); + + udelay(1); /* chip applies IRCFG on next rising edge of its 8MHz clock */ + + /* read back settings for validation */ + + config = inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_MASK; + + if (mode == IFF_FIR) + config ^= IRENABLE_FIR_ON; + else if (mode == IFF_MIR) + config ^= (IRENABLE_MIR_ON|IRENABLE_CRC16_ON); + else + config ^= IRENABLE_SIR_ON; + + if (config != (IRENABLE_PHYANDCLOCK|IRENABLE_ENRXST)) { + IRDA_WARNING("%s: failed to set %s mode!\n", __FUNCTION__, + (mode==IFF_SIR)?"SIR":((mode==IFF_MIR)?"MIR":"FIR")); + ret = -1; + } + else { + if (inw(iobase+VLSI_PIO_PHYCTL) != nphyctl) { + IRDA_WARNING("%s: failed to apply baudrate %d\n", + __FUNCTION__, baudrate); + ret = -1; + } + else { + idev->mode = mode; + idev->baud = baudrate; + idev->new_baud = 0; + ret = 0; + } + } + + if (ret) + vlsi_reg_debug(iobase,__FUNCTION__); + + return ret; +} + +static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + struct vlsi_ring *r = idev->tx_ring; + struct ring_descr *rd; + unsigned long flags; + unsigned iobase = ndev->base_addr; + u8 status; + u16 config; + int mtt; + int len, speed; + struct timeval now, ready; + char *msg = NULL; + + speed = irda_get_next_speed(skb); + spin_lock_irqsave(&idev->lock, flags); + if (speed != -1 && speed != idev->baud) { + netif_stop_queue(ndev); + idev->new_baud = speed; + status = RD_TX_CLRENTX; /* stop tx-ring after this frame */ + } + else + status = 0; + + if (skb->len == 0) { + /* handle zero packets - should be speed change */ + if (status == 0) { + msg = "bogus zero-length packet"; + goto drop_unlock; + } + + /* due to the completely asynch tx operation we might have + * IrLAP racing with the hardware here, f.e. if the controller + * is just sending the last packet with current speed while + * the LAP is already switching the speed using synchronous + * len=0 packet. Immediate execution would lead to hw lockup + * requiring a powercycle to reset. Good candidate to trigger + * this is the final UA:RSP packet after receiving a DISC:CMD + * when getting the LAP down. + * Note that we are not protected by the queue_stop approach + * because the final UA:RSP arrives _without_ request to apply + * new-speed-after-this-packet - hence the driver doesn't know + * this was the last packet and doesn't stop the queue. So the + * forced switch to default speed from LAP gets through as fast + * as only some 10 usec later while the UA:RSP is still processed + * by the hardware and we would get screwed. + */ + + if (ring_first(idev->tx_ring) == NULL) { + /* no race - tx-ring already empty */ + vlsi_set_baud(idev, iobase); + netif_wake_queue(ndev); + } + else + ; + /* keep the speed change pending like it would + * for any len>0 packet. tx completion interrupt + * will apply it when the tx ring becomes empty. + */ + spin_unlock_irqrestore(&idev->lock, flags); + dev_kfree_skb_any(skb); + return 0; + } + + /* sanity checks - simply drop the packet */ + + rd = ring_last(r); + if (!rd) { + msg = "ring full, but queue wasn't stopped"; + goto drop_unlock; + } + + if (rd_is_active(rd)) { + msg = "entry still owned by hw"; + goto drop_unlock; + } + + if (!rd->buf) { + msg = "tx ring entry without pci buffer"; + goto drop_unlock; + } + + if (rd->skb) { + msg = "ring entry with old skb still attached"; + goto drop_unlock; + } + + /* no need for serialization or interrupt disable during mtt */ + spin_unlock_irqrestore(&idev->lock, flags); + + if ((mtt = irda_get_mtt(skb)) > 0) { + + ready.tv_usec = idev->last_rx.tv_usec + mtt; + ready.tv_sec = idev->last_rx.tv_sec; + if (ready.tv_usec >= 1000000) { + ready.tv_usec -= 1000000; + ready.tv_sec++; /* IrLAP 1.1: mtt always < 1 sec */ + } + for(;;) { + do_gettimeofday(&now); + if (now.tv_sec > ready.tv_sec + || (now.tv_sec==ready.tv_sec && now.tv_usec>=ready.tv_usec)) + break; + udelay(100); + /* must not sleep here - we are called under xmit_lock! */ + } + } + + /* tx buffer already owned by CPU due to pci_dma_sync_single_for_cpu() + * after subsequent tx-completion + */ + + if (idev->mode == IFF_SIR) { + status |= RD_TX_DISCRC; /* no hw-crc creation */ + len = async_wrap_skb(skb, rd->buf, r->len); + + /* Some rare worst case situation in SIR mode might lead to + * potential buffer overflow. The wrapper detects this, returns + * with a shortened frame (without FCS/EOF) but doesn't provide + * any error indication about the invalid packet which we are + * going to transmit. + * Therefore we log if the buffer got filled to the point, where the + * wrapper would abort, i.e. when there are less than 5 bytes left to + * allow appending the FCS/EOF. + */ + + if (len >= r->len-5) + IRDA_WARNING("%s: possible buffer overflow with SIR wrapping!\n", + __FUNCTION__); + } + else { + /* hw deals with MIR/FIR mode wrapping */ + status |= RD_TX_PULSE; /* send 2 us highspeed indication pulse */ + len = skb->len; + if (len > r->len) { + msg = "frame exceeds tx buffer length"; + goto drop; + } + else + memcpy(rd->buf, skb->data, len); + } + + rd->skb = skb; /* remember skb for tx-complete stats */ + + rd_set_count(rd, len); + rd_set_status(rd, status); /* not yet active! */ + + /* give dma buffer back to busmaster-hw (flush caches to make + * CPU-driven changes visible from the pci bus). + */ + + pci_dma_sync_single_for_device(r->pdev, rd_get_addr(rd), r->len, r->dir); + +/* Switching to TX mode here races with the controller + * which may stop TX at any time when fetching an inactive descriptor + * or one with CLR_ENTX set. So we switch on TX only, if TX was not running + * _after_ the new descriptor was activated on the ring. This ensures + * we will either find TX already stopped or we can be sure, there + * will be a TX-complete interrupt even if the chip stopped doing + * TX just after we found it still running. The ISR will then find + * the non-empty ring and restart TX processing. The enclosing + * spinlock provides the correct serialization to prevent race with isr. + */ + + spin_lock_irqsave(&idev->lock,flags); + + rd_activate(rd); + + if (!(inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_ENTXST)) { + int fifocnt; + + fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; + if (fifocnt != 0) { + IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt); + } + + config = inw(iobase+VLSI_PIO_IRCFG); + mb(); + outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG); + wmb(); + outw(0, iobase+VLSI_PIO_PROMPT); + } + ndev->trans_start = jiffies; + + if (ring_put(r) == NULL) { + netif_stop_queue(ndev); + IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __FUNCTION__); + } + spin_unlock_irqrestore(&idev->lock, flags); + + return 0; + +drop_unlock: + spin_unlock_irqrestore(&idev->lock, flags); +drop: + IRDA_WARNING("%s: dropping packet - %s\n", __FUNCTION__, msg); + dev_kfree_skb_any(skb); + idev->stats.tx_errors++; + idev->stats.tx_dropped++; + /* Don't even think about returning NET_XMIT_DROP (=1) here! + * In fact any retval!=0 causes the packet scheduler to requeue the + * packet for later retry of transmission - which isn't exactly + * what we want after we've just called dev_kfree_skb_any ;-) + */ + return 0; +} + +static void vlsi_tx_interrupt(struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + struct vlsi_ring *r = idev->tx_ring; + struct ring_descr *rd; + unsigned iobase; + int ret; + u16 config; + + for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) { + + if (rd_is_active(rd)) + break; + + ret = vlsi_process_tx(r, rd); + + if (ret < 0) { + ret = -ret; + idev->stats.tx_errors++; + if (ret & VLSI_TX_DROP) + idev->stats.tx_dropped++; + if (ret & VLSI_TX_FIFO) + idev->stats.tx_fifo_errors++; + } + else if (ret > 0){ + idev->stats.tx_packets++; + idev->stats.tx_bytes += ret; + } + } + + iobase = ndev->base_addr; + + if (idev->new_baud && rd == NULL) /* tx ring empty and speed change pending */ + vlsi_set_baud(idev, iobase); + + config = inw(iobase+VLSI_PIO_IRCFG); + if (rd == NULL) /* tx ring empty: re-enable rx */ + outw((config & ~IRCFG_ENTX) | IRCFG_ENRX, iobase+VLSI_PIO_IRCFG); + + else if (!(inw(iobase+VLSI_PIO_IRENABLE) & IRENABLE_ENTXST)) { + int fifocnt; + + fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; + if (fifocnt != 0) { + IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", + __FUNCTION__, fifocnt); + } + outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG); + } + + outw(0, iobase+VLSI_PIO_PROMPT); + + if (netif_queue_stopped(ndev) && !idev->new_baud) { + netif_wake_queue(ndev); + IRDA_DEBUG(3, "%s: queue awoken\n", __FUNCTION__); + } +} + +/* caller must have stopped the controller from busmastering */ + +static void vlsi_unarm_tx(vlsi_irda_dev_t *idev) +{ + struct vlsi_ring *r = idev->tx_ring; + struct ring_descr *rd; + int ret; + + for (rd = ring_first(r); rd != NULL; rd = ring_get(r)) { + + ret = 0; + if (rd_is_active(rd)) { + rd_set_status(rd, 0); + rd_set_count(rd, 0); + pci_dma_sync_single_for_cpu(r->pdev, rd_get_addr(rd), r->len, r->dir); + if (rd->skb) { + dev_kfree_skb_any(rd->skb); + rd->skb = NULL; + } + IRDA_DEBUG(0, "%s - dropping tx packet\n", __FUNCTION__); + ret = -VLSI_TX_DROP; + } + else + ret = vlsi_process_tx(r, rd); + + if (ret < 0) { + ret = -ret; + idev->stats.tx_errors++; + if (ret & VLSI_TX_DROP) + idev->stats.tx_dropped++; + if (ret & VLSI_TX_FIFO) + idev->stats.tx_fifo_errors++; + } + else if (ret > 0){ + idev->stats.tx_packets++; + idev->stats.tx_bytes += ret; + } + } + +} + +/********************************************************/ + +static int vlsi_start_clock(struct pci_dev *pdev) +{ + u8 clkctl, lock; + int i, count; + + if (clksrc < 2) { /* auto or PLL: try PLL */ + clkctl = CLKCTL_PD_INV | CLKCTL_CLKSTP; + pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl); + + /* procedure to detect PLL lock synchronisation: + * after 0.5 msec initial delay we expect to find 3 PLL lock + * indications within 10 msec for successful PLL detection. + */ + udelay(500); + count = 0; + for (i = 500; i <= 10000; i += 50) { /* max 10 msec */ + pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &lock); + if (lock&CLKCTL_LOCK) { + if (++count >= 3) + break; + } + udelay(50); + } + if (count < 3) { + if (clksrc == 1) { /* explicitly asked for PLL hence bail out */ + IRDA_ERROR("%s: no PLL or failed to lock!\n", + __FUNCTION__); + clkctl = CLKCTL_CLKSTP; + pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl); + return -1; + } + else /* was: clksrc=0(auto) */ + clksrc = 3; /* fallback to 40MHz XCLK (OB800) */ + + IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n", + __FUNCTION__, clksrc); + } + else + clksrc = 1; /* got successful PLL lock */ + } + + if (clksrc != 1) { + /* we get here if either no PLL detected in auto-mode or + an external clock source was explicitly specified */ + + clkctl = CLKCTL_EXTCLK | CLKCTL_CLKSTP; + if (clksrc == 3) + clkctl |= CLKCTL_XCKSEL; + pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl); + + /* no way to test for working XCLK */ + } + else + pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &clkctl); + + /* ok, now going to connect the chip with the clock source */ + + clkctl &= ~CLKCTL_CLKSTP; + pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl); + + return 0; +} + +static void vlsi_stop_clock(struct pci_dev *pdev) +{ + u8 clkctl; + + /* disconnect chip from clock source */ + pci_read_config_byte(pdev, VLSI_PCI_CLKCTL, &clkctl); + clkctl |= CLKCTL_CLKSTP; + pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl); + + /* disable all clock sources */ + clkctl &= ~(CLKCTL_EXTCLK | CLKCTL_PD_INV); + pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl); +} + +/********************************************************/ + +/* writing all-zero to the VLSI PCI IO register area seems to prevent + * some occasional situations where the hardware fails (symptoms are + * what appears as stalled tx/rx state machines, i.e. everything ok for + * receive or transmit but hw makes no progress or is unable to access + * the bus memory locations). + * Best place to call this is immediately after/before the internal clock + * gets started/stopped. + */ + +static inline void vlsi_clear_regs(unsigned iobase) +{ + unsigned i; + const unsigned chip_io_extent = 32; + + for (i = 0; i < chip_io_extent; i += sizeof(u16)) + outw(0, iobase + i); +} + +static int vlsi_init_chip(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + vlsi_irda_dev_t *idev = ndev->priv; + unsigned iobase; + u16 ptr; + + /* start the clock and clean the registers */ + + if (vlsi_start_clock(pdev)) { + IRDA_ERROR("%s: no valid clock source\n", __FUNCTION__); + return -1; + } + iobase = ndev->base_addr; + vlsi_clear_regs(iobase); + + outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR); /* w/c pending IRQ, disable all INT */ + + outw(0, iobase+VLSI_PIO_IRENABLE); /* disable IrPHY-interface */ + + /* disable everything, particularly IRCFG_MSTR - (also resetting the RING_PTR) */ + + outw(0, iobase+VLSI_PIO_IRCFG); + wmb(); + + outw(MAX_PACKET_LENGTH, iobase+VLSI_PIO_MAXPKT); /* max possible value=0x0fff */ + + outw(BUS_TO_RINGBASE(idev->busaddr), iobase+VLSI_PIO_RINGBASE); + + outw(TX_RX_TO_RINGSIZE(idev->tx_ring->size, idev->rx_ring->size), + iobase+VLSI_PIO_RINGSIZE); + + ptr = inw(iobase+VLSI_PIO_RINGPTR); + atomic_set(&idev->rx_ring->head, RINGPTR_GET_RX(ptr)); + atomic_set(&idev->rx_ring->tail, RINGPTR_GET_RX(ptr)); + atomic_set(&idev->tx_ring->head, RINGPTR_GET_TX(ptr)); + atomic_set(&idev->tx_ring->tail, RINGPTR_GET_TX(ptr)); + + vlsi_set_baud(idev, iobase); /* idev->new_baud used as provided by caller */ + + outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR); /* just in case - w/c pending IRQ's */ + wmb(); + + /* DO NOT BLINDLY ENABLE IRINTR_ACTEN! + * basically every received pulse fires an ACTIVITY-INT + * leading to >>1000 INT's per second instead of few 10 + */ + + outb(IRINTR_RPKTEN|IRINTR_TPKTEN, iobase+VLSI_PIO_IRINTR); + + return 0; +} + +static int vlsi_start_hw(vlsi_irda_dev_t *idev) +{ + struct pci_dev *pdev = idev->pdev; + struct net_device *ndev = pci_get_drvdata(pdev); + unsigned iobase = ndev->base_addr; + u8 byte; + + /* we don't use the legacy UART, disable its address decoding */ + + pci_read_config_byte(pdev, VLSI_PCI_IRMISC, &byte); + byte &= ~(IRMISC_UARTEN | IRMISC_UARTTST); + pci_write_config_byte(pdev, VLSI_PCI_IRMISC, byte); + + /* enable PCI busmaster access to our 16MB page */ + + pci_write_config_byte(pdev, VLSI_PCI_MSTRPAGE, MSTRPAGE_VALUE); + pci_set_master(pdev); + + if (vlsi_init_chip(pdev) < 0) { + pci_disable_device(pdev); + return -1; + } + + vlsi_fill_rx(idev->rx_ring); + + do_gettimeofday(&idev->last_rx); /* first mtt may start from now on */ + + outw(0, iobase+VLSI_PIO_PROMPT); /* kick hw state machine */ + + return 0; +} + +static int vlsi_stop_hw(vlsi_irda_dev_t *idev) +{ + struct pci_dev *pdev = idev->pdev; + struct net_device *ndev = pci_get_drvdata(pdev); + unsigned iobase = ndev->base_addr; + unsigned long flags; + + spin_lock_irqsave(&idev->lock,flags); + outw(0, iobase+VLSI_PIO_IRENABLE); + outw(0, iobase+VLSI_PIO_IRCFG); /* disable everything */ + + /* disable and w/c irqs */ + outb(0, iobase+VLSI_PIO_IRINTR); + wmb(); + outb(IRINTR_INT_MASK, iobase+VLSI_PIO_IRINTR); + spin_unlock_irqrestore(&idev->lock,flags); + + vlsi_unarm_tx(idev); + vlsi_unarm_rx(idev); + + vlsi_clear_regs(iobase); + vlsi_stop_clock(pdev); + + pci_disable_device(pdev); + + return 0; +} + +/**************************************************************/ + +static struct net_device_stats * vlsi_get_stats(struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + + return &idev->stats; +} + +static void vlsi_tx_timeout(struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + + + vlsi_reg_debug(ndev->base_addr, __FUNCTION__); + vlsi_ring_debug(idev->tx_ring); + + if (netif_running(ndev)) + netif_stop_queue(ndev); + + vlsi_stop_hw(idev); + + /* now simply restart the whole thing */ + + if (!idev->new_baud) + idev->new_baud = idev->baud; /* keep current baudrate */ + + if (vlsi_start_hw(idev)) + IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n", + __FUNCTION__, PCIDEV_NAME(idev->pdev), ndev->name); + else + netif_start_queue(ndev); +} + +static int vlsi_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) +{ + vlsi_irda_dev_t *idev = ndev->priv; + struct if_irda_req *irq = (struct if_irda_req *) rq; + unsigned long flags; + u16 fifocnt; + int ret = 0; + + switch (cmd) { + case SIOCSBANDWIDTH: + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } + spin_lock_irqsave(&idev->lock, flags); + idev->new_baud = irq->ifr_baudrate; + /* when called from userland there might be a minor race window here + * if the stack tries to change speed concurrently - which would be + * pretty strange anyway with the userland having full control... + */ + vlsi_set_baud(idev, ndev->base_addr); + spin_unlock_irqrestore(&idev->lock, flags); + break; + case SIOCSMEDIABUSY: + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } + irda_device_set_media_busy(ndev, TRUE); + break; + case SIOCGRECEIVING: + /* the best we can do: check whether there are any bytes in rx fifo. + * The trustable window (in case some data arrives just afterwards) + * may be as short as 1usec or so at 4Mbps. + */ + fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; + irq->ifr_receiving = (fifocnt!=0) ? 1 : 0; + break; + default: + IRDA_WARNING("%s: notsupp - cmd=%04x\n", + __FUNCTION__, cmd); + ret = -EOPNOTSUPP; + } + + return ret; +} + +/********************************************************/ + +static irqreturn_t vlsi_interrupt(int irq, void *dev_instance, + struct pt_regs *regs) +{ + struct net_device *ndev = dev_instance; + vlsi_irda_dev_t *idev = ndev->priv; + unsigned iobase; + u8 irintr; + int boguscount = 5; + unsigned long flags; + int handled = 0; + + iobase = ndev->base_addr; + spin_lock_irqsave(&idev->lock,flags); + do { + irintr = inb(iobase+VLSI_PIO_IRINTR); + mb(); + outb(irintr, iobase+VLSI_PIO_IRINTR); /* acknowledge asap */ + + if (!(irintr&=IRINTR_INT_MASK)) /* not our INT - probably shared */ + break; + + handled = 1; + + if (unlikely(!(irintr & ~IRINTR_ACTIVITY))) + break; /* nothing todo if only activity */ + + if (irintr&IRINTR_RPKTINT) + vlsi_rx_interrupt(ndev); + + if (irintr&IRINTR_TPKTINT) + vlsi_tx_interrupt(ndev); + + } while (--boguscount > 0); + spin_unlock_irqrestore(&idev->lock,flags); + + if (boguscount <= 0) + IRDA_MESSAGE("%s: too much work in interrupt!\n", + __FUNCTION__); + return IRQ_RETVAL(handled); +} + +/********************************************************/ + +static int vlsi_open(struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + int err = -EAGAIN; + char hwname[32]; + + if (pci_request_regions(idev->pdev, drivername)) { + IRDA_WARNING("%s: io resource busy\n", __FUNCTION__); + goto errout; + } + ndev->base_addr = pci_resource_start(idev->pdev,0); + ndev->irq = idev->pdev->irq; + + /* under some rare occasions the chip apparently comes up with + * IRQ's pending. We better w/c pending IRQ and disable them all + */ + + outb(IRINTR_INT_MASK, ndev->base_addr+VLSI_PIO_IRINTR); + + if (request_irq(ndev->irq, vlsi_interrupt, SA_SHIRQ, + drivername, ndev)) { + IRDA_WARNING("%s: couldn't get IRQ: %d\n", + __FUNCTION__, ndev->irq); + goto errout_io; + } + + if ((err = vlsi_create_hwif(idev)) != 0) + goto errout_irq; + + sprintf(hwname, "VLSI-FIR @ 0x%04x", (unsigned)ndev->base_addr); + idev->irlap = irlap_open(ndev,&idev->qos,hwname); + if (!idev->irlap) + goto errout_free_ring; + + do_gettimeofday(&idev->last_rx); /* first mtt may start from now on */ + + idev->new_baud = 9600; /* start with IrPHY using 9600(SIR) mode */ + + if ((err = vlsi_start_hw(idev)) != 0) + goto errout_close_irlap; + + netif_start_queue(ndev); + + IRDA_MESSAGE("%s: device %s operational\n", __FUNCTION__, ndev->name); + + return 0; + +errout_close_irlap: + irlap_close(idev->irlap); +errout_free_ring: + vlsi_destroy_hwif(idev); +errout_irq: + free_irq(ndev->irq,ndev); +errout_io: + pci_release_regions(idev->pdev); +errout: + return err; +} + +static int vlsi_close(struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + + netif_stop_queue(ndev); + + if (idev->irlap) + irlap_close(idev->irlap); + idev->irlap = NULL; + + vlsi_stop_hw(idev); + + vlsi_destroy_hwif(idev); + + free_irq(ndev->irq,ndev); + + pci_release_regions(idev->pdev); + + IRDA_MESSAGE("%s: device %s stopped\n", __FUNCTION__, ndev->name); + + return 0; +} + +static int vlsi_irda_init(struct net_device *ndev) +{ + vlsi_irda_dev_t *idev = ndev->priv; + struct pci_dev *pdev = idev->pdev; + + SET_MODULE_OWNER(ndev); + + ndev->irq = pdev->irq; + ndev->base_addr = pci_resource_start(pdev,0); + + /* PCI busmastering + * see include file for details why we need these 2 masks, in this order! + */ + + if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW) + || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) { + IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __FUNCTION__); + return -1; + } + + irda_init_max_qos_capabilies(&idev->qos); + + /* the VLSI82C147 does not support 576000! */ + + idev->qos.baud_rate.bits = IR_2400 | IR_9600 + | IR_19200 | IR_38400 | IR_57600 | IR_115200 + | IR_1152000 | (IR_4000000 << 8); + + idev->qos.min_turn_time.bits = qos_mtt_bits; + + irda_qos_bits_to_value(&idev->qos); + + /* currently no public media definitions for IrDA */ + + ndev->flags |= IFF_PORTSEL | IFF_AUTOMEDIA; + ndev->if_port = IF_PORT_UNKNOWN; + + ndev->open = vlsi_open; + ndev->stop = vlsi_close; + ndev->get_stats = vlsi_get_stats; + ndev->hard_start_xmit = vlsi_hard_start_xmit; + ndev->do_ioctl = vlsi_ioctl; + ndev->tx_timeout = vlsi_tx_timeout; + ndev->watchdog_timeo = 500*HZ/1000; /* max. allowed turn time for IrLAP */ + + SET_NETDEV_DEV(ndev, &pdev->dev); + + return 0; +} + +/**************************************************************/ + +static int __devinit +vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct net_device *ndev; + vlsi_irda_dev_t *idev; + + if (pci_enable_device(pdev)) + goto out; + else + pdev->current_state = 0; /* hw must be running now */ + + IRDA_MESSAGE("%s: IrDA PCI controller %s detected\n", + drivername, PCIDEV_NAME(pdev)); + + if ( !pci_resource_start(pdev,0) + || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) { + IRDA_ERROR("%s: bar 0 invalid", __FUNCTION__); + goto out_disable; + } + + ndev = alloc_irdadev(sizeof(*idev)); + if (ndev==NULL) { + IRDA_ERROR("%s: Unable to allocate device memory.\n", + __FUNCTION__); + goto out_disable; + } + + idev = ndev->priv; + + spin_lock_init(&idev->lock); + init_MUTEX(&idev->sem); + down(&idev->sem); + idev->pdev = pdev; + + if (vlsi_irda_init(ndev) < 0) + goto out_freedev; + + if (register_netdev(ndev) < 0) { + IRDA_ERROR("%s: register_netdev failed\n", __FUNCTION__); + goto out_freedev; + } + + if (vlsi_proc_root != NULL) { + struct proc_dir_entry *ent; + + ent = create_proc_entry(ndev->name, S_IFREG|S_IRUGO, vlsi_proc_root); + if (!ent) { + IRDA_WARNING("%s: failed to create proc entry\n", + __FUNCTION__); + } else { + ent->data = ndev; + ent->proc_fops = VLSI_PROC_FOPS; + ent->size = 0; + } + idev->proc_entry = ent; + } + IRDA_MESSAGE("%s: registered device %s\n", drivername, ndev->name); + + pci_set_drvdata(pdev, ndev); + up(&idev->sem); + + return 0; + +out_freedev: + up(&idev->sem); + free_netdev(ndev); +out_disable: + pci_disable_device(pdev); +out: + pci_set_drvdata(pdev, NULL); + return -ENODEV; +} + +static void __devexit vlsi_irda_remove(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + vlsi_irda_dev_t *idev; + + if (!ndev) { + IRDA_ERROR("%s: lost netdevice?\n", drivername); + return; + } + + unregister_netdev(ndev); + + idev = ndev->priv; + down(&idev->sem); + if (idev->proc_entry) { + remove_proc_entry(ndev->name, vlsi_proc_root); + idev->proc_entry = NULL; + } + up(&idev->sem); + + free_netdev(ndev); + + pci_set_drvdata(pdev, NULL); + + IRDA_MESSAGE("%s: %s removed\n", drivername, PCIDEV_NAME(pdev)); +} + +#ifdef CONFIG_PM + +/* The Controller doesn't provide PCI PM capabilities as defined by PCI specs. + * Some of the Linux PCI-PM code however depends on this, for example in + * pci_set_power_state(). So we have to take care to perform the required + * operations on our own (particularly reflecting the pdev->current_state) + * otherwise we might get cheated by pci-pm. + */ + + +static int vlsi_irda_suspend(struct pci_dev *pdev, u32 state) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + vlsi_irda_dev_t *idev; + + if (state < 1 || state > 3 ) { + IRDA_ERROR("%s - %s: invalid pm state request: %u\n", + __FUNCTION__, PCIDEV_NAME(pdev), state); + return 0; + } + if (!ndev) { + IRDA_ERROR("%s - %s: no netdevice \n", + __FUNCTION__, PCIDEV_NAME(pdev)); + return 0; + } + idev = ndev->priv; + down(&idev->sem); + if (pdev->current_state != 0) { /* already suspended */ + if (state > pdev->current_state) { /* simply go deeper */ + pci_set_power_state(pdev,state); + pdev->current_state = state; + } + else + IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, PCIDEV_NAME(pdev), pdev->current_state, state); + up(&idev->sem); + return 0; + } + + if (netif_running(ndev)) { + netif_device_detach(ndev); + vlsi_stop_hw(idev); + pci_save_state(pdev); + if (!idev->new_baud) + /* remember speed settings to restore on resume */ + idev->new_baud = idev->baud; + } + + pci_set_power_state(pdev,state); + pdev->current_state = state; + idev->resume_ok = 1; + up(&idev->sem); + return 0; +} + +static int vlsi_irda_resume(struct pci_dev *pdev) +{ + struct net_device *ndev = pci_get_drvdata(pdev); + vlsi_irda_dev_t *idev; + + if (!ndev) { + IRDA_ERROR("%s - %s: no netdevice \n", + __FUNCTION__, PCIDEV_NAME(pdev)); + return 0; + } + idev = ndev->priv; + down(&idev->sem); + if (pdev->current_state == 0) { + up(&idev->sem); + IRDA_WARNING("%s - %s: already resumed\n", + __FUNCTION__, PCIDEV_NAME(pdev)); + return 0; + } + + pci_set_power_state(pdev, 0); + pdev->current_state = 0; + + if (!idev->resume_ok) { + /* should be obsolete now - but used to happen due to: + * - pci layer initially setting pdev->current_state = 4 (unknown) + * - pci layer did not walk the save_state-tree (might be APM problem) + * so we could not refuse to suspend from undefined state + * - vlsi_irda_suspend detected invalid state and refused to save + * configuration for resume - but was too late to stop suspending + * - vlsi_irda_resume got screwed when trying to resume from garbage + * + * now we explicitly set pdev->current_state = 0 after enabling the + * device and independently resume_ok should catch any garbage config. + */ + IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__); + up(&idev->sem); + return 0; + } + + if (netif_running(ndev)) { + pci_restore_state(pdev); + vlsi_start_hw(idev); + netif_device_attach(ndev); + } + idev->resume_ok = 0; + up(&idev->sem); + return 0; +} + +#endif /* CONFIG_PM */ + +/*********************************************************/ + +static struct pci_driver vlsi_irda_driver = { + .name = drivername, + .id_table = vlsi_irda_table, + .probe = vlsi_irda_probe, + .remove = __devexit_p(vlsi_irda_remove), +#ifdef CONFIG_PM + .suspend = vlsi_irda_suspend, + .resume = vlsi_irda_resume, +#endif +}; + +#define PROC_DIR ("driver/" DRIVER_NAME) + +static int __init vlsi_mod_init(void) +{ + int i, ret; + + if (clksrc < 0 || clksrc > 3) { + IRDA_ERROR("%s: invalid clksrc=%d\n", drivername, clksrc); + return -1; + } + + for (i = 0; i < 2; i++) { + switch(ringsize[i]) { + case 4: + case 8: + case 16: + case 32: + case 64: + break; + default: + IRDA_WARNING("%s: invalid %s ringsize %d, using default=8", drivername, (i)?"rx":"tx", ringsize[i]); + ringsize[i] = 8; + break; + } + } + + sirpulse = !!sirpulse; + + /* create_proc_entry returns NULL if !CONFIG_PROC_FS. + * Failure to create the procfs entry is handled like running + * without procfs - it's not required for the driver to work. + */ + vlsi_proc_root = create_proc_entry(PROC_DIR, S_IFDIR, NULL); + if (vlsi_proc_root) { + /* protect registered procdir against module removal. + * Because we are in the module init path there's no race + * window after create_proc_entry (and no barrier needed). + */ + vlsi_proc_root->owner = THIS_MODULE; + } + + ret = pci_module_init(&vlsi_irda_driver); + + if (ret && vlsi_proc_root) + remove_proc_entry(PROC_DIR, NULL); + return ret; + +} + +static void __exit vlsi_mod_exit(void) +{ + pci_unregister_driver(&vlsi_irda_driver); + if (vlsi_proc_root) + remove_proc_entry(PROC_DIR, NULL); +} + +module_init(vlsi_mod_init); +module_exit(vlsi_mod_exit); |