diff options
Diffstat (limited to 'drivers/pci/quirks.c')
-rw-r--r-- | drivers/pci/quirks.c | 108 |
1 files changed, 103 insertions, 5 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index d8e9a0e..17741d3 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1082,7 +1082,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB /* * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */ -static void __init quirk_ide_samemode(struct pci_dev *pdev) +static void __devinit quirk_ide_samemode(struct pci_dev *pdev) { u8 prog; @@ -1121,7 +1121,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. */ -static void __init quirk_eisa_bridge(struct pci_dev *dev) +static void __devinit quirk_eisa_bridge(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_EISA << 8; } @@ -1155,7 +1155,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_e */ static int asus_hides_smbus; -static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) +static void __devinit asus_hides_smbus_hostbridge(struct pci_dev *dev) { if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) @@ -1538,7 +1538,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3 #endif #ifdef CONFIG_X86_IO_APIC -static void __init quirk_alder_ioapic(struct pci_dev *pdev) +static void __devinit quirk_alder_ioapic(struct pci_dev *pdev) { int i; @@ -1777,7 +1777,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, qui * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. * Re-allocate the region if needed... */ -static void __init quirk_tc86c001_ide(struct pci_dev *dev) +static void __devinit quirk_tc86c001_ide(struct pci_dev *dev) { struct resource *r = &dev->resource[0]; @@ -2946,6 +2946,20 @@ static void __devinit disable_igfx_irq(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); +/* + * Some devices may pass our check in pci_intx_mask_supported if + * PCI_COMMAND_INTX_DISABLE works though they actually do not properly + * support this feature. + */ +static void __devinit quirk_broken_intx_masking(struct pci_dev *dev) +{ + dev->broken_intx_masking = 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030, + quirk_broken_intx_masking); +DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ + quirk_broken_intx_masking); + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { @@ -3214,3 +3228,87 @@ int pci_dev_specific_reset(struct pci_dev *dev, int probe) return -ENOTTY; } + +static struct pci_dev *pci_func_0_dma_source(struct pci_dev *dev) +{ + if (!PCI_FUNC(dev->devfn)) + return pci_dev_get(dev); + + return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); +} + +static const struct pci_dev_dma_source { + u16 vendor; + u16 device; + struct pci_dev *(*dma_source)(struct pci_dev *dev); +} pci_dev_dma_source[] = { + /* + * https://bugzilla.redhat.com/show_bug.cgi?id=605888 + * + * Some Ricoh devices use the function 0 source ID for DMA on + * other functions of a multifunction device. The DMA devices + * is therefore function 0, which will have implications of the + * iommu grouping of these devices. + */ + { PCI_VENDOR_ID_RICOH, 0xe822, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe230, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe832, pci_func_0_dma_source }, + { PCI_VENDOR_ID_RICOH, 0xe476, pci_func_0_dma_source }, + { 0 } +}; + +/* + * IOMMUs with isolation capabilities need to be programmed with the + * correct source ID of a device. In most cases, the source ID matches + * the device doing the DMA, but sometimes hardware is broken and will + * tag the DMA as being sourced from a different device. This function + * allows that translation. Note that the reference count of the + * returned device is incremented on all paths. + */ +struct pci_dev *pci_get_dma_source(struct pci_dev *dev) +{ + const struct pci_dev_dma_source *i; + + for (i = pci_dev_dma_source; i->dma_source; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) + return i->dma_source(dev); + } + + return pci_dev_get(dev); +} + +static const struct pci_dev_acs_enabled { + u16 vendor; + u16 device; + int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); +} pci_dev_acs_enabled[] = { + { 0 } +}; + +int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) +{ + const struct pci_dev_acs_enabled *i; + int ret; + + /* + * Allow devices that do not expose standard PCIe ACS capabilities + * or control to indicate their support here. Multi-function express + * devices which do not allow internal peer-to-peer between functions, + * but do not implement PCIe ACS may wish to return true here. + */ + for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { + if ((i->vendor == dev->vendor || + i->vendor == (u16)PCI_ANY_ID) && + (i->device == dev->device || + i->device == (u16)PCI_ANY_ID)) { + ret = i->acs_enabled(dev, acs_flags); + if (ret >= 0) + return ret; + } + } + + return -ENOTTY; +} |