22 files changed, 46 insertions, 310 deletions

diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index f41b425..cf35e0d 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -743,7 +743,7 @@ pci_ni8430_setup(struct serial_private *priv,
 	len =  pci_resource_len(priv->dev, bar);
 	p = ioremap_nocache(base, len);
 
-	/* enable the transciever */
+	/* enable the transceiver */
 	writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
 	       p + offset + NI8430_PORTCON);
 
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 636144c..8f41e11 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -457,7 +457,6 @@ config SERIAL_SAMSUNG_UARTS_4
 config SERIAL_SAMSUNG_UARTS
 	int
 	depends on ARM && PLAT_SAMSUNG
-	default 2 if ARCH_S3C2400
 	default 6 if ARCH_S5P6450
 	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
@@ -489,13 +488,6 @@ config SERIAL_SAMSUNG_CONSOLE
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
-config SERIAL_S3C2400
-	tristate "Samsung S3C2410 Serial port support"
-	depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400
-	default y if CPU_S3C2400
-	help
-	  Serial port support for the Samsung S3C2400 SoC
-
 config SERIAL_S3C2410
 	tristate "Samsung S3C2410 Serial port support"
 	depends on SERIAL_SAMSUNG && CPU_S3C2410
@@ -519,13 +511,6 @@ config SERIAL_S3C2440
 	help
 	  Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
 
-config SERIAL_S3C24A0
-	tristate "Samsung S3C24A0 Serial port support"
-	depends on SERIAL_SAMSUNG && CPU_S3C24A0
-	default y if CPU_S3C24A0
-	help
-	  Serial port support for the Samsung S3C24A0 SoC
-
 config SERIAL_S3C6400
 	tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
 	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index cb2628f..83b4da6 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -38,11 +38,9 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
-obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 6d5d6e6..af9b781 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1709,12 +1709,13 @@ static int atmel_serial_resume(struct platform_device *pdev)
 static int __devinit atmel_serial_probe(struct platform_device *pdev)
 {
 	struct atmel_uart_port *port;
+	struct atmel_uart_data *pdata = pdev->dev.platform_data;
 	void *data;
 	int ret;
 
 	BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
 
-	port = &atmel_ports[pdev->id];
+	port = &atmel_ports[pdata->num];
 	port->backup_imr = 0;
 
 	atmel_init_port(port, pdev);
diff --git a/drivers/tty/serial/bfin_5xx.c b/drivers/tty/serial/bfin_5xx.c
index 9b1ff2b..ff69791 100644
--- a/drivers/tty/serial/bfin_5xx.c
+++ b/drivers/tty/serial/bfin_5xx.c
@@ -1304,8 +1304,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
 			goto out_error_free_peripherals;
 		}
 
-		uart->port.membase = ioremap(res->start,
-			res->end - res->start);
+		uart->port.membase = ioremap(res->start, resource_size(res));
 		if (!uart->port.membase) {
 			dev_err(&pdev->dev, "Cannot map uart IO\n");
 			ret = -ENXIO;
@@ -1483,7 +1482,7 @@ static int bfin_earlyprintk_probe(struct platform_device *pdev)
 	}
 
 	bfin_earlyprintk_port.port.membase = ioremap(res->start,
-			res->end - res->start);
+						     resource_size(res));
 	if (!bfin_earlyprintk_port.port.membase) {
 		dev_err(&pdev->dev, "Cannot map uart IO\n");
 		ret = -ENXIO;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 5315525..426434e 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -36,6 +36,7 @@
  *	you need to use this driver for another platform.
  *
  *****************************************************************************/
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/termios.h>
 #include <linux/tty.h>
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index a544731..22fe801 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -954,7 +954,7 @@ static void imx_release_port(struct uart_port *port)
 	struct resource *mmres;
 
 	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mmres->start, mmres->end - mmres->start + 1);
+	release_mem_region(mmres->start, resource_size(mmres));
 }
 
 /*
@@ -970,8 +970,7 @@ static int imx_request_port(struct uart_port *port)
 	if (!mmres)
 		return -ENODEV;
 
-	ret = request_mem_region(mmres->start, mmres->end - mmres->start + 1,
-			"imx-uart");
+	ret = request_mem_region(mmres->start, resource_size(mmres), "imx-uart");
 
 	return  ret ? 0 : -EBUSY;
 }
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 84db732..8e07517 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -892,7 +892,7 @@ static int m32r_sio_request_port(struct uart_port *port)
 	 * If we have a mapbase, then request that as well.
 	 */
 	if (ret == 0 && up->port.flags & UPF_IOREMAP) {
-		int size = res->end - res->start + 1;
+		int size = resource_size(res);
 
 		up->port.membase = ioremap(up->port.mapbase, size);
 		if (!up->port.membase)
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index c911b24..e58cece 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -32,17 +32,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 {
 	struct resource resource;
 	struct device_node *np = ofdev->dev.of_node;
-	const __be32 *clk, *spd;
-	const __be32 *prop;
-	int ret, prop_size;
+	u32 clk, spd, prop;
+	int ret;
 
 	memset(port, 0, sizeof *port);
-	spd = of_get_property(np, "current-speed", NULL);
-	clk = of_get_property(np, "clock-frequency", NULL);
-	if (!clk) {
+	if (of_property_read_u32(np, "clock-frequency", &clk)) {
 		dev_warn(&ofdev->dev, "no clock-frequency property set\n");
 		return -ENODEV;
 	}
+	/* If current-speed was set, then try not to change it. */
+	if (of_property_read_u32(np, "current-speed", &spd) == 0)
+		port->custom_divisor = clk / (16 * spd);
 
 	ret = of_address_to_resource(np, 0, &resource);
 	if (ret) {
@@ -54,25 +54,35 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 	port->mapbase = resource.start;
 
 	/* Check for shifted address mapping */
-	prop = of_get_property(np, "reg-offset", &prop_size);
-	if (prop && (prop_size == sizeof(u32)))
-		port->mapbase += be32_to_cpup(prop);
+	if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+		port->mapbase += prop;
 
 	/* Check for registers offset within the devices address range */
-	prop = of_get_property(np, "reg-shift", &prop_size);
-	if (prop && (prop_size == sizeof(u32)))
-		port->regshift = be32_to_cpup(prop);
+	if (of_property_read_u32(np, "reg-shift", &prop) == 0)
+		port->regshift = prop;
 
 	port->irq = irq_of_parse_and_map(np, 0);
 	port->iotype = UPIO_MEM;
+	if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+		switch (prop) {
+		case 1:
+			port->iotype = UPIO_MEM;
+			break;
+		case 4:
+			port->iotype = UPIO_MEM32;
+			break;
+		default:
+			dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
+				 prop);
+			return -EINVAL;
+		}
+	}
+
 	port->type = type;
-	port->uartclk = be32_to_cpup(clk);
+	port->uartclk = clk;
 	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
 		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
 	port->dev = &ofdev->dev;
-	/* If current-speed was set, then try not to change it. */
-	if (spd)
-		port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd)));
 
 	return 0;
 }
@@ -171,6 +181,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = {
 	{ .compatible = "ns16550",  .data = (void *)PORT_16550, },
 	{ .compatible = "ns16750",  .data = (void *)PORT_16750, },
 	{ .compatible = "ns16850",  .data = (void *)PORT_16850, },
+	{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
 	{ .compatible = "ibm,qpace-nwp-serial",
 		.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 47cadf4..c37df8d 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1241,8 +1241,8 @@ static int serial_omap_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (!request_mem_region(mem->start, (mem->end - mem->start) + 1,
-				     pdev->dev.driver->name)) {
+	if (!request_mem_region(mem->start, resource_size(mem),
+				pdev->dev.driver->name)) {
 		dev_err(&pdev->dev, "memory region already claimed\n");
 		return -EBUSY;
 	}
@@ -1308,7 +1308,7 @@ err:
 	dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
 				pdev->id, __func__, ret);
 do_release_region:
-	release_mem_region(mem->start, (mem->end - mem->start) + 1);
+	release_mem_region(mem->start, resource_size(mem));
 	return ret;
 }
 
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 4302e6e..531931c 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -803,7 +803,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 		break;
 	}
 
-	sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
+	sport->port.membase = ioremap(mmres->start, resource_size(mmres));
 	if (!sport->port.membase) {
 		ret = -ENOMEM;
 		goto err_clk;
diff --git a/drivers/tty/serial/s3c2400.c b/drivers/tty/serial/s3c2400.c
deleted file mode 100644
index d13051b..0000000
--- a/drivers/tty/serial/s3c2400.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Driver for Samsung SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2400_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	clk->divisor = 1;
-	clk->name = "pclk";
-
-	return 0;
-}
-
-static int s3c2400_serial_setsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	return 0;
-}
-
-static int s3c2400_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	wr_regl(port, S3C2410_UCON,  cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c2400_uart_inf = {
-	.name		= "Samsung S3C2400 UART",
-	.type		= PORT_S3C2400,
-	.fifosize	= 16,
-	.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c2400_serial_getsource,
-	.set_clksrc	= s3c2400_serial_setsource,
-	.reset_port	= s3c2400_serial_resetport,
-};
-
-static int s3c2400_serial_probe(struct platform_device *dev)
-{
-	return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
-}
-
-static struct platform_driver s3c2400_serial_driver = {
-	.probe		= s3c2400_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s3c2400-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
-
-static inline int s3c2400_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
-}
-
-static inline void s3c2400_serial_exit(void)
-{
-	platform_driver_unregister(&s3c2400_serial_driver);
-}
-
-module_init(s3c2400_serial_init);
-module_exit(s3c2400_serial_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver");
-MODULE_ALIAS("platform:s3c2400-uart");
diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c
index bffe6ff..b1d7e7c 100644
--- a/drivers/tty/serial/s3c2410.c
+++ b/drivers/tty/serial/s3c2410.c
@@ -96,8 +96,6 @@ static struct platform_driver s3c2410_serial_driver = {
 	},
 };
 
-s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
-
 static int __init s3c2410_serial_init(void)
 {
 	return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c
index 7e2b950..2234bf9 100644
--- a/drivers/tty/serial/s3c2412.c
+++ b/drivers/tty/serial/s3c2412.c
@@ -130,8 +130,6 @@ static struct platform_driver s3c2412_serial_driver = {
 	},
 };
 
-s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
-
 static inline int s3c2412_serial_init(void)
 {
 	return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c
index 9e10d41..1d0c324 100644
--- a/drivers/tty/serial/s3c2440.c
+++ b/drivers/tty/serial/s3c2440.c
@@ -159,8 +159,6 @@ static struct platform_driver s3c2440_serial_driver = {
 	},
 };
 
-s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
-
 static int __init s3c2440_serial_init(void)
 {
 	return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
diff --git a/drivers/tty/serial/s3c24a0.c b/drivers/tty/serial/s3c24a0.c
deleted file mode 100644
index 914eff2..0000000
--- a/drivers/tty/serial/s3c24a0.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Driver for Samsung S3C24A0 SoC onboard UARTs.
- *
- * Based on drivers/serial/s3c2410.c
- *
- * Author: Sandeep Patil <sandeep.patil@azingo.com>
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c24a0_serial_setsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	if (strcmp(clk->name, "uclk") == 0)
-		ucon |= S3C2410_UCON_UCLK;
-	else
-		ucon &= ~S3C2410_UCON_UCLK;
-
-	wr_regl(port, S3C2410_UCON, ucon);
-	return 0;
-}
-
-static int s3c24a0_serial_getsource(struct uart_port *port,
-				    struct s3c24xx_uart_clksrc *clk)
-{
-	unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
-	clk->divisor = 1;
-	clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
-
-	return 0;
-}
-
-static int s3c24a0_serial_resetport(struct uart_port *port,
-				    struct s3c2410_uartcfg *cfg)
-{
-	dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n",
-	    port, port->mapbase, cfg);
-
-	wr_regl(port, S3C2410_UCON,  cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
-	/* reset both fifos */
-
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
-	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
-	return 0;
-}
-
-static struct s3c24xx_uart_info s3c24a0_uart_inf = {
-	.name		= "Samsung S3C24A0 UART",
-	.type		= PORT_S3C2410,
-	.fifosize	= 16,
-	.rx_fifomask	= S3C24A0_UFSTAT_RXMASK,
-	.rx_fifoshift	= S3C24A0_UFSTAT_RXSHIFT,
-	.rx_fifofull	= S3C24A0_UFSTAT_RXFULL,
-	.tx_fifofull	= S3C24A0_UFSTAT_TXFULL,
-	.tx_fifomask	= S3C24A0_UFSTAT_TXMASK,
-	.tx_fifoshift	= S3C24A0_UFSTAT_TXSHIFT,
-	.get_clksrc	= s3c24a0_serial_getsource,
-	.set_clksrc	= s3c24a0_serial_setsource,
-	.reset_port	= s3c24a0_serial_resetport,
-};
-
-static int s3c24a0_serial_probe(struct platform_device *dev)
-{
-	return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
-}
-
-static struct platform_driver s3c24a0_serial_driver = {
-	.probe		= s3c24a0_serial_probe,
-	.remove		= __devexit_p(s3c24xx_serial_remove),
-	.driver		= {
-		.name	= "s3c24a0-uart",
-		.owner	= THIS_MODULE,
-	},
-};
-
-s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
-
-static int __init s3c24a0_serial_init(void)
-{
-	return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
-}
-
-static void __exit s3c24a0_serial_exit(void)
-{
-	platform_driver_unregister(&s3c24a0_serial_driver);
-}
-
-module_init(s3c24a0_serial_init);
-module_exit(s3c24a0_serial_exit);
-
diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c
index ded26c4..e2f6913 100644
--- a/drivers/tty/serial/s3c6400.c
+++ b/drivers/tty/serial/s3c6400.c
@@ -130,8 +130,6 @@ static struct platform_driver s3c6400_serial_driver = {
 	},
 };
 
-s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
-
 static int __init s3c6400_serial_init(void)
 {
 	return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
index dd194dc..8dd160c 100644
--- a/drivers/tty/serial/s5pv210.c
+++ b/drivers/tty/serial/s5pv210.c
@@ -135,13 +135,6 @@ static struct platform_driver s5p_serial_driver = {
 	},
 };
 
-static int __init s5pv210_serial_console_init(void)
-{
-	return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf);
-}
-
-console_initcall(s5pv210_serial_console_init);
-
 static int __init s5p_serial_init(void)
 {
 	return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index f66f648..7ead421 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1416,10 +1416,8 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 
 	/* is the port configured? */
 
-	if (port->mapbase == 0x0) {
-		co->index = 0;
-		port = &s3c24xx_serial_ports[co->index].port;
-	}
+	if (port->mapbase == 0x0)
+		return -ENODEV;
 
 	cons_uart = port;
 
@@ -1451,7 +1449,8 @@ static struct console s3c24xx_serial_console = {
 	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
 	.write		= s3c24xx_serial_console_write,
-	.setup		= s3c24xx_serial_console_setup
+	.setup		= s3c24xx_serial_console_setup,
+	.data		= &s3c24xx_uart_drv,
 };
 
 int s3c24xx_serial_initconsole(struct platform_driver *drv,
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 5b098cd..a69d9a5 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -79,25 +79,6 @@ extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
 extern int s3c24xx_serial_init(struct platform_driver *drv,
 			       struct s3c24xx_uart_info *info);
 
-#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
-
-#define s3c24xx_console_init(__drv, __inf)				\
-static int __init s3c_serial_console_init(void)				\
-{									\
-	struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS];	\
-	int i;								\
-									\
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)		\
-		uinfo[i] = __inf;					\
-	return s3c24xx_serial_initconsole(__drv, uinfo);		\
-}									\
-									\
-console_initcall(s3c_serial_console_init)
-
-#else
-#define s3c24xx_console_init(drv, inf) extern void no_console(void)
-#endif
-
 #ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
 
 extern void printascii(const char *);
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 92aa545..ad0f8f5 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1435,7 +1435,7 @@ static int __devinit su_probe(struct platform_device *op)
 
 	rp = &op->resource[0];
 	up->port.mapbase = rp->start;
-	up->reg_size = (rp->end - rp->start) + 1;
+	up->reg_size = resource_size(rp);
 	up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
 	if (!up->port.membase) {
 		if (type != SU_PORT_PORT)
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 37fc4e3..026cb9e 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -573,8 +573,7 @@ static int __init vt8500_serial_probe(struct platform_device *pdev)
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
 
-	vt8500_port->uart.membase = ioremap(mmres->start,
-					    mmres->end - mmres->start + 1);
+	vt8500_port->uart.membase = ioremap(mmres->start, resource_size(mmres));
 	if (!vt8500_port->uart.membase) {
 		ret = -ENOMEM;
 		goto err;