summaryrefslogtreecommitdiff
path: root/drivers/usb/host/pci-quirks.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/pci-quirks.c')
-rw-r--r--drivers/usb/host/pci-quirks.c48
1 files changed, 18 insertions, 30 deletions
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index b9848e4..2c76ef1 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -735,32 +735,6 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
return -ETIMEDOUT;
}
-#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI 0x8C31
-#define PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI 0x9C31
-
-bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev)
-{
- return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
- pdev->vendor == PCI_VENDOR_ID_INTEL &&
- pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI;
-}
-
-/* The Intel Lynx Point chipset also has switchable ports. */
-bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev)
-{
- return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
- pdev->vendor == PCI_VENDOR_ID_INTEL &&
- (pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI);
-}
-
-bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
-{
- return usb_is_intel_ppt_switchable_xhci(pdev) ||
- usb_is_intel_lpt_switchable_xhci(pdev);
-}
-EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
-
/*
* Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
* share some number of ports. These ports can be switched between either
@@ -779,9 +753,23 @@ EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
* terminations before switching the USB 2.0 wires over, so that USB 3.0
* devices connect at SuperSpeed, rather than at USB 2.0 speeds.
*/
-void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
{
u32 ports_available;
+ bool ehci_found = false;
+ struct pci_dev *companion = NULL;
+
+ /* make sure an intel EHCI controller exists */
+ for_each_pci_dev(companion) {
+ if (companion->class == PCI_CLASS_SERIAL_USB_EHCI &&
+ companion->vendor == PCI_VENDOR_ID_INTEL) {
+ ehci_found = true;
+ break;
+ }
+ }
+
+ if (!ehci_found)
+ return;
/* Don't switchover the ports if the user hasn't compiled the xHCI
* driver. Otherwise they will see "dead" USB ports that don't power
@@ -840,7 +828,7 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over "
"to xHCI: 0x%x\n", ports_available);
}
-EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
+EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports);
void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
{
@@ -921,8 +909,8 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
hc_init:
- if (usb_is_intel_switchable_xhci(pdev))
- usb_enable_xhci_ports(pdev);
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ usb_enable_intel_xhci_ports(pdev);
op_reg_base = base + XHCI_HC_LENGTH(readl(base));