diff options
Diffstat (limited to 'drivers/usb/serial')
| -rw-r--r-- | drivers/usb/serial/cypress_m8.h | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/io_edgeport.c | 2 | ||||
| -rw-r--r-- | drivers/usb/serial/kl5kusb105.c | 2 |
3 files changed, 3 insertions, 3 deletions
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index e772b01..1fd360e 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -57,7 +57,7 @@ #define UART_RI 0x10 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ -/* Note - the below has nothing to to with the "feature report" reset */ +/* Note - the below has nothing to do with the "feature report" reset */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */ /* End of RS-232 protocol definitions */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dc0f832..b97960a 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2540,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor) /***************************************************************************** * send_cmd_write_uart_register - * this function builds up a uart register message and sends to to the device. + * this function builds up a uart register message and sends to the device. *****************************************************************************/ static int send_cmd_write_uart_register(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a616731..f737337 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -38,7 +38,7 @@ * 0.3a - implemented pools of write URBs * 0.3 - alpha version for public testing * 0.2 - TIOCMGET works, so autopilot(1) can be used! - * 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l + * 0.1 - can be used to do pilot-xfer -p /dev/ttyUSB0 -l * * The driver skeleton is mainly based on mct_u232.c and various other * pieces of code shamelessly copied from the drivers/usb/serial/ directory. |