diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/base/power/resume.c | 28 | ||||
| -rw-r--r-- | drivers/base/power/suspend.c | 122 |
2 files changed, 116 insertions, 34 deletions
diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c index 826093e..48e3d49 100644 --- a/drivers/base/power/resume.c +++ b/drivers/base/power/resume.c @@ -38,13 +38,35 @@ int resume_device(struct device * dev) dev_dbg(dev,"resuming\n"); error = dev->bus->resume(dev); } + if (dev->class && dev->class->resume) { + dev_dbg(dev,"class resume\n"); + error = dev->class->resume(dev); + } up(&dev->sem); TRACE_RESUME(error); return error; } +static int resume_device_early(struct device * dev) +{ + int error = 0; + TRACE_DEVICE(dev); + TRACE_RESUME(0); + if (dev->bus && dev->bus->resume_early) { + dev_dbg(dev,"EARLY resume\n"); + error = dev->bus->resume_early(dev); + } + TRACE_RESUME(error); + return error; +} + +/* + * Resume the devices that have either not gone through + * the late suspend, or that did go through it but also + * went through the early resume + */ void dpm_resume(void) { down(&dpm_list_sem); @@ -99,10 +121,8 @@ void dpm_power_up(void) struct list_head * entry = dpm_off_irq.next; struct device * dev = to_device(entry); - get_device(dev); - list_move_tail(entry, &dpm_active); - resume_device(dev); - put_device(dev); + list_move_tail(entry, &dpm_off); + resume_device_early(dev); } } diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c index 69509e0..10e8032 100644 --- a/drivers/base/power/suspend.c +++ b/drivers/base/power/suspend.c @@ -65,7 +65,19 @@ int suspend_device(struct device * dev, pm_message_t state) dev->power.prev_state = dev->power.power_state; - if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) { + if (dev->class && dev->class->suspend && !dev->power.power_state.event) { + dev_dbg(dev, "class %s%s\n", + suspend_verb(state.event), + ((state.event == PM_EVENT_SUSPEND) + && device_may_wakeup(dev)) + ? ", may wakeup" + : "" + ); + error = dev->class->suspend(dev, state); + suspend_report_result(dev->class->suspend, error); + } + + if (!error && dev->bus && dev->bus->suspend && !dev->power.power_state.event) { dev_dbg(dev, "%s%s\n", suspend_verb(state.event), ((state.event == PM_EVENT_SUSPEND) @@ -81,15 +93,74 @@ int suspend_device(struct device * dev, pm_message_t state) } +/* + * This is called with interrupts off, only a single CPU + * running. We can't do down() on a semaphore (and we don't + * need the protection) + */ +static int suspend_device_late(struct device *dev, pm_message_t state) +{ + int error = 0; + + if (dev->power.power_state.event) { + dev_dbg(dev, "PM: suspend_late %d-->%d\n", + dev->power.power_state.event, state.event); + } + + if (dev->bus && dev->bus->suspend_late && !dev->power.power_state.event) { + dev_dbg(dev, "LATE %s%s\n", + suspend_verb(state.event), + ((state.event == PM_EVENT_SUSPEND) + && device_may_wakeup(dev)) + ? ", may wakeup" + : "" + ); + error = dev->bus->suspend_late(dev, state); + suspend_report_result(dev->bus->suspend_late, error); + } + return error; +} + +/** + * device_prepare_suspend - save state and prepare to suspend + * + * NOTE! Devices cannot detach at this point - not only do we + * hold the device list semaphores over the whole prepare, but + * the whole point is to do non-invasive preparatory work, not + * the actual suspend. + */ +int device_prepare_suspend(pm_message_t state) +{ + int error = 0; + struct device * dev; + + down(&dpm_sem); + down(&dpm_list_sem); + list_for_each_entry_reverse(dev, &dpm_active, power.entry) { + if (!dev->bus || !dev->bus->suspend_prepare) + continue; + error = dev->bus->suspend_prepare(dev, state); + if (error) + break; + } + up(&dpm_list_sem); + up(&dpm_sem); + return error; +} + /** * device_suspend - Save state and stop all devices in system. * @state: Power state to put each device in. * * Walk the dpm_active list, call ->suspend() for each device, and move - * it to dpm_off. - * Check the return value for each. If it returns 0, then we move the - * the device to the dpm_off list. If it returns -EAGAIN, we move it to - * the dpm_off_irq list. If we get a different error, try and back out. + * it to the dpm_off list. + * + * (For historical reasons, if it returns -EAGAIN, that used to mean + * that the device would be called again with interrupts disabled. + * These days, we use the "suspend_late()" callback for that, so we + * print a warning and consider it an error). + * + * If we get a different error, try and back out. * * If we hit a failure with any of the devices, call device_resume() * above to bring the suspended devices back to life. @@ -115,39 +186,27 @@ int device_suspend(pm_message_t state) /* Check if the device got removed */ if (!list_empty(&dev->power.entry)) { - /* Move it to the dpm_off or dpm_off_irq list */ + /* Move it to the dpm_off list */ if (!error) list_move(&dev->power.entry, &dpm_off); - else if (error == -EAGAIN) { - list_move(&dev->power.entry, &dpm_off_irq); - error = 0; - } } if (error) printk(KERN_ERR "Could not suspend device %s: " - "error %d\n", kobject_name(&dev->kobj), error); + "error %d%s\n", + kobject_name(&dev->kobj), error, + error == -EAGAIN ? " (please convert to suspend_late)" : ""); put_device(dev); } up(&dpm_list_sem); - if (error) { - /* we failed... before resuming, bring back devices from - * dpm_off_irq list back to main dpm_off list, we do want - * to call resume() on them, in case they partially suspended - * despite returning -EAGAIN - */ - while (!list_empty(&dpm_off_irq)) { - struct list_head * entry = dpm_off_irq.next; - list_move(entry, &dpm_off); - } + if (error) dpm_resume(); - } + up(&dpm_sem); return error; } EXPORT_SYMBOL_GPL(device_suspend); - /** * device_power_down - Shut down special devices. * @state: Power state to enter. @@ -162,14 +221,17 @@ int device_power_down(pm_message_t state) int error = 0; struct device * dev; - list_for_each_entry_reverse(dev, &dpm_off_irq, power.entry) { - if ((error = suspend_device(dev, state))) - break; + while (!list_empty(&dpm_off)) { + struct list_head * entry = dpm_off.prev; + + dev = to_device(entry); + error = suspend_device_late(dev, state); + if (error) + goto Error; + list_move(&dev->power.entry, &dpm_off_irq); } - if (error) - goto Error; - if ((error = sysdev_suspend(state))) - goto Error; + + error = sysdev_suspend(state); Done: return error; Error: |