summaryrefslogtreecommitdiff
path: root/fs/partitions/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'fs/partitions/Kconfig')
-rw-r--r--fs/partitions/Kconfig251
1 files changed, 0 insertions, 251 deletions
diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig
deleted file mode 100644
index cb5f0a3..0000000
--- a/fs/partitions/Kconfig
+++ /dev/null
@@ -1,251 +0,0 @@
-#
-# Partition configuration
-#
-config PARTITION_ADVANCED
- bool "Advanced partition selection"
- help
- Say Y here if you would like to use hard disks under Linux which
- were partitioned under an operating system running on a different
- architecture than your Linux system.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about foreign partitioning schemes.
-
- If unsure, say N.
-
-config ACORN_PARTITION
- bool "Acorn partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
- help
- Support hard disks partitioned under Acorn operating systems.
-
-config ACORN_PARTITION_CUMANA
- bool "Cumana partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
- depends on ACORN_PARTITION
- help
- Say Y here if you would like to use hard disks under Linux which
- were partitioned using the Cumana interface on Acorn machines.
-
-config ACORN_PARTITION_EESOX
- bool "EESOX partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
- depends on ACORN_PARTITION
-
-config ACORN_PARTITION_ICS
- bool "ICS partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
- depends on ACORN_PARTITION
- help
- Say Y here if you would like to use hard disks under Linux which
- were partitioned using the ICS interface on Acorn machines.
-
-config ACORN_PARTITION_ADFS
- bool "Native filecore partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
- depends on ACORN_PARTITION
- help
- The Acorn Disc Filing System is the standard file system of the
- RiscOS operating system which runs on Acorn's ARM-based Risc PC
- systems and the Acorn Archimedes range of machines. If you say
- `Y' here, Linux will support disk partitions created under ADFS.
-
-config ACORN_PARTITION_POWERTEC
- bool "PowerTec partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
- depends on ACORN_PARTITION
- help
- Support reading partition tables created on Acorn machines using
- the PowerTec SCSI drive.
-
-config ACORN_PARTITION_RISCIX
- bool "RISCiX partition support" if PARTITION_ADVANCED
- default y if ARCH_ACORN
- depends on ACORN_PARTITION
- help
- Once upon a time, there was a native Unix port for the Acorn series
- of machines called RISCiX. If you say 'Y' here, Linux will be able
- to read disks partitioned under RISCiX.
-
-config OSF_PARTITION
- bool "Alpha OSF partition support" if PARTITION_ADVANCED
- default y if ALPHA
- help
- Say Y here if you would like to use hard disks under Linux which
- were partitioned on an Alpha machine.
-
-config AMIGA_PARTITION
- bool "Amiga partition table support" if PARTITION_ADVANCED
- default y if (AMIGA || AFFS_FS=y)
- help
- Say Y here if you would like to use hard disks under Linux which
- were partitioned under AmigaOS.
-
-config ATARI_PARTITION
- bool "Atari partition table support" if PARTITION_ADVANCED
- default y if ATARI
- help
- Say Y here if you would like to use hard disks under Linux which
- were partitioned under the Atari OS.
-
-config IBM_PARTITION
- bool "IBM disk label and partition support"
- depends on PARTITION_ADVANCED && S390
- help
- Say Y here if you would like to be able to read the hard disk
- partition table format used by IBM DASD disks operating under CMS.
- Otherwise, say N.
-
-config MAC_PARTITION
- bool "Macintosh partition map support" if PARTITION_ADVANCED
- default y if (MAC || PPC_PMAC)
- help
- Say Y here if you would like to use hard disks under Linux which
- were partitioned on a Macintosh.
-
-config MSDOS_PARTITION
- bool "PC BIOS (MSDOS partition tables) support" if PARTITION_ADVANCED
- default y
- help
- Say Y here.
-
-config BSD_DISKLABEL
- bool "BSD disklabel (FreeBSD partition tables) support"
- depends on PARTITION_ADVANCED && MSDOS_PARTITION
- help
- FreeBSD uses its own hard disk partition scheme on your PC. It
- requires only one entry in the primary partition table of your disk
- and manages it similarly to DOS extended partitions, putting in its
- first sector a new partition table in BSD disklabel format. Saying Y
- here allows you to read these disklabels and further mount FreeBSD
- partitions from within Linux if you have also said Y to "UFS
- file system support", above. If you don't know what all this is
- about, say N.
-
-config MINIX_SUBPARTITION
- bool "Minix subpartition support"
- depends on PARTITION_ADVANCED && MSDOS_PARTITION
- help
- Minix 2.0.0/2.0.2 subpartition table support for Linux.
- Say Y here if you want to mount and use Minix 2.0.0/2.0.2
- subpartitions.
-
-config SOLARIS_X86_PARTITION
- bool "Solaris (x86) partition table support"
- depends on PARTITION_ADVANCED && MSDOS_PARTITION
- help
- Like most systems, Solaris x86 uses its own hard disk partition
- table format, incompatible with all others. Saying Y here allows you
- to read these partition tables and further mount Solaris x86
- partitions from within Linux if you have also said Y to "UFS
- file system support", above.
-
-config UNIXWARE_DISKLABEL
- bool "Unixware slices support"
- depends on PARTITION_ADVANCED && MSDOS_PARTITION
- ---help---
- Like some systems, UnixWare uses its own slice table inside a
- partition (VTOC - Virtual Table of Contents). Its format is
- incompatible with all other OSes. Saying Y here allows you to read
- VTOC and further mount UnixWare partitions read-only from within
- Linux if you have also said Y to "UFS file system support" or
- "System V and Coherent file system support", above.
-
- This is mainly used to carry data from a UnixWare box to your
- Linux box via a removable medium like magneto-optical, ZIP or
- removable IDE drives. Note, however, that a good portable way to
- transport files and directories between unixes (and even other
- operating systems) is given by the tar program ("man tar" or
- preferably "info tar").
-
- If you don't know what all this is about, say N.
-
-config LDM_PARTITION
- bool "Windows Logical Disk Manager (Dynamic Disk) support"
- depends on PARTITION_ADVANCED
- ---help---
- Say Y here if you would like to use hard disks under Linux which
- were partitioned using Windows 2000's/XP's or Vista's Logical Disk
- Manager. They are also known as "Dynamic Disks".
-
- Note this driver only supports Dynamic Disks with a protective MBR
- label, i.e. DOS partition table. It does not support GPT labelled
- Dynamic Disks yet as can be created with Vista.
-
- Windows 2000 introduced the concept of Dynamic Disks to get around
- the limitations of the PC's partitioning scheme. The Logical Disk
- Manager allows the user to repartition a disk and create spanned,
- mirrored, striped or RAID volumes, all without the need for
- rebooting.
-
- Normal partitions are now called Basic Disks under Windows 2000, XP,
- and Vista.
-
- For a fuller description read <file:Documentation/ldm.txt>.
-
- If unsure, say N.
-
-config LDM_DEBUG
- bool "Windows LDM extra logging"
- depends on LDM_PARTITION
- help
- Say Y here if you would like LDM to log verbosely. This could be
- helpful if the driver doesn't work as expected and you'd like to
- report a bug.
-
- If unsure, say N.
-
-config SGI_PARTITION
- bool "SGI partition support" if PARTITION_ADVANCED
- default y if DEFAULT_SGI_PARTITION
- help
- Say Y here if you would like to be able to read the hard disk
- partition table format used by SGI machines.
-
-config ULTRIX_PARTITION
- bool "Ultrix partition table support" if PARTITION_ADVANCED
- default y if MACH_DECSTATION
- help
- Say Y here if you would like to be able to read the hard disk
- partition table format used by DEC (now Compaq) Ultrix machines.
- Otherwise, say N.
-
-config SUN_PARTITION
- bool "Sun partition tables support" if PARTITION_ADVANCED
- default y if (SPARC || SUN3 || SUN3X)
- ---help---
- Like most systems, SunOS uses its own hard disk partition table
- format, incompatible with all others. Saying Y here allows you to
- read these partition tables and further mount SunOS partitions from
- within Linux if you have also said Y to "UFS file system support",
- above. This is mainly used to carry data from a SPARC under SunOS to
- your Linux box via a removable medium like magneto-optical or ZIP
- drives; note however that a good portable way to transport files and
- directories between unixes (and even other operating systems) is
- given by the tar program ("man tar" or preferably "info tar"). If
- you don't know what all this is about, say N.
-
-config KARMA_PARTITION
- bool "Karma Partition support"
- depends on PARTITION_ADVANCED
- help
- Say Y here if you would like to mount the Rio Karma MP3 player, as it
- uses a proprietary partition table.
-
-config EFI_PARTITION
- bool "EFI GUID Partition support"
- depends on PARTITION_ADVANCED
- select CRC32
- help
- Say Y here if you would like to use hard disks under Linux which
- were partitioned using EFI GPT.
-
-config SYSV68_PARTITION
- bool "SYSV68 partition table support" if PARTITION_ADVANCED
- default y if VME
- help
- Say Y here if you would like to be able to read the hard disk
- partition table format used by Motorola Delta machines (using
- sysv68).
- Otherwise, say N.