diff options
Diffstat (limited to 'include/linux/mmc/sh_mmcif.h')
-rw-r--r-- | include/linux/mmc/sh_mmcif.h | 95 |
1 files changed, 60 insertions, 35 deletions
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 5c99da1..38d3930 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -14,8 +14,9 @@ #ifndef __SH_MMCIF_H__ #define __SH_MMCIF_H__ -#include <linux/platform_device.h> #include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/sh_dma.h> /* * MMCIF : CE_CLK_CTRL [19:16] @@ -31,13 +32,19 @@ * 1111 : Peripheral clock (sup_pclk set '1') */ +struct sh_mmcif_dma { + struct sh_dmae_slave chan_priv_tx; + struct sh_dmae_slave chan_priv_rx; +}; + struct sh_mmcif_plat_data { void (*set_pwr)(struct platform_device *pdev, int state); void (*down_pwr)(struct platform_device *pdev); int (*get_cd)(struct platform_device *pdef); - u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ - unsigned long caps; - u32 ocr; + struct sh_mmcif_dma *dma; + u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ + unsigned long caps; + u32 ocr; }; #define MMCIF_CE_CMD_SET 0x00000000 @@ -59,18 +66,47 @@ struct sh_mmcif_plat_data { #define MMCIF_CE_HOST_STS2 0x0000004C #define MMCIF_CE_VERSION 0x0000007C +/* CE_BUF_ACC */ +#define BUF_ACC_DMAWEN (1 << 25) +#define BUF_ACC_DMAREN (1 << 24) +#define BUF_ACC_BUSW_32 (0 << 17) +#define BUF_ACC_BUSW_16 (1 << 17) +#define BUF_ACC_ATYP (1 << 16) + +/* CE_CLK_CTRL */ +#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ +#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) +#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) +#define CLKDIV_4 (1<<16) /* mmc clock frequency. + * n: bus clock/(2^(n+1)) */ +#define CLKDIV_256 (7<<16) /* mmc clock frequency. (see above) */ +#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ +#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ + (1 << 9) | (1 << 8)) /* resp busy timeout */ +#define SRWDTO_29 ((1 << 7) | (1 << 6) | \ + (1 << 5) | (1 << 4)) /* read/write timeout */ +#define SCCSTO_29 ((1 << 3) | (1 << 2) | \ + (1 << 1) | (1 << 0)) /* ccs timeout */ + +/* CE_VERSION */ +#define SOFT_RST_ON (1 << 31) +#define SOFT_RST_OFF 0 + static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) { - return readl(addr + reg); + return __raw_readl(addr + reg); } static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) { - writel(val, addr + reg); + __raw_writel(val, addr + reg); } #define SH_MMCIF_BBS 512 /* boot block size */ +enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT, + MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE }; + static inline void sh_mmcif_boot_cmd_send(void __iomem *base, unsigned long cmd, unsigned long arg) { @@ -133,6 +169,17 @@ static inline int sh_mmcif_boot_do_read(void __iomem *base, unsigned long k; int ret = 0; + /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | CLKDIV_4 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); + + /* CMD9 - Get CSD */ + sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); + + /* CMD7 - Select the card */ + sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000); + /* CMD16 - Set the block size */ sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS); @@ -145,21 +192,20 @@ static inline int sh_mmcif_boot_do_read(void __iomem *base, static inline void sh_mmcif_boot_init(void __iomem *base) { - unsigned long tmp; - /* reset */ - tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION); - sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000); - sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000); + sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON); + sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF); /* byte swap */ - sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000); + sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); /* Set block size in MMCIF hardware */ sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS); - /* Enable the clock, set it to Bus clock/256 (about 325Khz)*/ - sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff); + /* Enable the clock, set it to Bus clock/256 (about 325Khz). */ + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | CLKDIV_256 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); /* CMD0 */ sh_mmcif_boot_cmd(base, 0x00000040, 0); @@ -177,25 +223,4 @@ static inline void sh_mmcif_boot_init(void __iomem *base) sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000); } -static inline void sh_mmcif_boot_slurp(void __iomem *base, - unsigned char *buf, - unsigned long no_bytes) -{ - unsigned long tmp; - - /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ - sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff); - - /* CMD9 - Get CSD */ - sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); - - /* CMD7 - Select the card */ - sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000); - - tmp = no_bytes / SH_MMCIF_BBS; - tmp += (no_bytes % SH_MMCIF_BBS) ? 1 : 0; - - sh_mmcif_boot_do_read(base, 512, tmp, buf); -} - #endif /* __SH_MMCIF_H__ */ |