summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h260
1 files changed, 200 insertions, 60 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 559422f..12a52ef 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -207,7 +207,7 @@ struct ieee80211_bss_conf {
u16 beacon_int;
u16 assoc_capability;
u64 timestamp;
- u64 basic_rates;
+ u32 basic_rates;
struct ieee80211_bss_ht_conf ht;
};
@@ -262,6 +262,26 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
};
+/**
+ * enum mac80211_rate_control_flags - per-rate flags set by the
+ * Rate Control algorithm.
+ *
+ * These flags are set by the Rate control algorithm for each rate during tx,
+ * in the @flags member of struct ieee80211_tx_rate.
+ *
+ * @IEEE80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @IEEE80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ * This is set if the current BSS requires ERP protection.
+ * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @IEEE80211_TX_RC_MCS: HT rate.
+ * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
+ * Greenfield mode.
+ * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
+ * adjacent 20 MHz channels, if the current channel type is
+ * NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
+ * @IEEE80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate.
+ */
enum mac80211_rate_control_flags {
IEEE80211_TX_RC_USE_RTS_CTS = BIT(0),
IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1),
@@ -507,11 +527,6 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
}
#define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME())
-struct ieee80211_ht_conf {
- bool enabled;
- enum nl80211_channel_type channel_type;
-};
-
/**
* enum ieee80211_conf_changed - denotes which configuration changed
*
@@ -520,10 +535,10 @@ struct ieee80211_ht_conf {
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
* @IEEE80211_CONF_CHANGE_PS: the PS flag changed
+ * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
* @IEEE80211_CONF_CHANGE_POWER: the TX power changed
- * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed
+ * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
* @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
- * @IEEE80211_CONF_CHANGE_HT: HT configuration changed
*/
enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
@@ -531,10 +546,10 @@ enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
- IEEE80211_CONF_CHANGE_POWER = BIT(5),
- IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
- IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
- IEEE80211_CONF_CHANGE_HT = BIT(8),
+ IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT = BIT(5),
+ IEEE80211_CONF_CHANGE_POWER = BIT(6),
+ IEEE80211_CONF_CHANGE_CHANNEL = BIT(7),
+ IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(8),
};
/**
@@ -547,8 +562,9 @@ enum ieee80211_conf_changed {
* @listen_interval: listen interval in units of beacon interval
* @flags: configuration flags defined above
* @power_level: requested transmit power (in dBm)
+ * @dynamic_ps_timeout: dynamic powersave timeout (in ms)
* @channel: the channel to tune to
- * @ht: the HT configuration for the device
+ * @channel_type: the channel (HT) type
* @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
* (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
* but actually means the number of transmissions not the number of retries
@@ -559,7 +575,7 @@ enum ieee80211_conf_changed {
struct ieee80211_conf {
int beacon_int;
u32 flags;
- int power_level;
+ int power_level, dynamic_ps_timeout;
u16 listen_interval;
bool radio_enabled;
@@ -567,7 +583,7 @@ struct ieee80211_conf {
u8 long_frame_max_tx_count, short_frame_max_tx_count;
struct ieee80211_channel *channel;
- struct ieee80211_ht_conf ht;
+ enum nl80211_channel_type channel_type;
};
/**
@@ -630,10 +646,12 @@ struct ieee80211_if_init_conf {
* @IEEE80211_IFCC_BSSID: The BSSID changed.
* @IEEE80211_IFCC_BEACON: The beacon for this interface changed
* (currently AP and MESH only), use ieee80211_beacon_get().
+ * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed.
*/
enum ieee80211_if_conf_change {
- IEEE80211_IFCC_BSSID = BIT(0),
- IEEE80211_IFCC_BEACON = BIT(1),
+ IEEE80211_IFCC_BSSID = BIT(0),
+ IEEE80211_IFCC_BEACON = BIT(1),
+ IEEE80211_IFCC_BEACON_ENABLED = BIT(2),
};
/**
@@ -641,13 +659,16 @@ enum ieee80211_if_conf_change {
*
* @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
* @bssid: BSSID of the network we are associated to/creating.
+ * @enable_beacon: Indicates whether beacons can be sent.
+ * This is valid only for AP/IBSS/MESH modes.
*
* This structure is passed to the config_interface() callback of
* &struct ieee80211_hw.
*/
struct ieee80211_if_conf {
u32 changed;
- u8 *bssid;
+ const u8 *bssid;
+ bool enable_beacon;
};
/**
@@ -655,11 +676,13 @@ struct ieee80211_if_conf {
* @ALG_WEP: WEP40 or WEP104
* @ALG_TKIP: TKIP
* @ALG_CCMP: CCMP (AES)
+ * @ALG_AES_CMAC: AES-128-CMAC
*/
enum ieee80211_key_alg {
ALG_WEP,
ALG_TKIP,
ALG_CCMP,
+ ALG_AES_CMAC,
};
/**
@@ -688,12 +711,16 @@ enum ieee80211_key_len {
* generation in software.
* @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
* that the key is pairwise rather then a shared key.
+ * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a
+ * CCMP key if it requires CCMP encryption of management frames (MFP) to
+ * be done in software.
*/
enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_WMM_STA = 1<<0,
IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1,
IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
IEEE80211_KEY_FLAG_PAIRWISE = 1<<3,
+ IEEE80211_KEY_FLAG_SW_MGMT = 1<<4,
};
/**
@@ -714,8 +741,8 @@ enum ieee80211_key_flags {
* - Temporal Encryption Key (128 bits)
* - Temporal Authenticator Tx MIC Key (64 bits)
* - Temporal Authenticator Rx MIC Key (64 bits)
- * @icv_len: FIXME
- * @iv_len: FIXME
+ * @icv_len: The ICV length for this key type
+ * @iv_len: The IV length for this key type
*/
struct ieee80211_key_conf {
enum ieee80211_key_alg alg;
@@ -759,7 +786,7 @@ enum set_key_cmd {
* sizeof(void *), size is determined in hw information.
*/
struct ieee80211_sta {
- u64 supp_rates[IEEE80211_NUM_BANDS];
+ u32 supp_rates[IEEE80211_NUM_BANDS];
u8 addr[ETH_ALEN];
u16 aid;
struct ieee80211_sta_ht_cap ht_cap;
@@ -833,11 +860,6 @@ enum ieee80211_tkip_key_type {
* expect values between 0 and @max_signal.
* If possible please provide dB or dBm instead.
*
- * @IEEE80211_HW_SIGNAL_DB:
- * Hardware gives signal values in dB, decibel difference from an
- * arbitrary, fixed reference. We expect values between 0 and @max_signal.
- * If possible please provide dBm instead.
- *
* @IEEE80211_HW_SIGNAL_DBM:
* Hardware gives signal values in dBm, decibel difference from
* one milliwatt. This is the preferred method since it is standardized
@@ -854,10 +876,18 @@ enum ieee80211_tkip_key_type {
* @IEEE80211_HW_AMPDU_AGGREGATION:
* Hardware supports 11n A-MPDU aggregation.
*
- * @IEEE80211_HW_NO_STACK_DYNAMIC_PS:
- * Hardware which has dynamic power save support, meaning
- * that power save is enabled in idle periods, and don't need support
- * from stack.
+ * @IEEE80211_HW_SUPPORTS_PS:
+ * Hardware has power save support (i.e. can go to sleep).
+ *
+ * @IEEE80211_HW_PS_NULLFUNC_STACK:
+ * Hardware requires nullfunc frame handling in stack, implies
+ * stack support for dynamic PS.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS:
+ * Hardware has support for dynamic PS.
+ *
+ * @IEEE80211_HW_MFP_CAPABLE:
+ * Hardware supports management frame protection (MFP, IEEE 802.11w).
*/
enum ieee80211_hw_flags {
IEEE80211_HW_RX_INCLUDES_FCS = 1<<1,
@@ -865,12 +895,14 @@ enum ieee80211_hw_flags {
IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3,
IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4,
IEEE80211_HW_SIGNAL_UNSPEC = 1<<5,
- IEEE80211_HW_SIGNAL_DB = 1<<6,
- IEEE80211_HW_SIGNAL_DBM = 1<<7,
- IEEE80211_HW_NOISE_DBM = 1<<8,
- IEEE80211_HW_SPECTRUM_MGMT = 1<<9,
- IEEE80211_HW_AMPDU_AGGREGATION = 1<<10,
- IEEE80211_HW_NO_STACK_DYNAMIC_PS = 1<<11,
+ IEEE80211_HW_SIGNAL_DBM = 1<<6,
+ IEEE80211_HW_NOISE_DBM = 1<<7,
+ IEEE80211_HW_SPECTRUM_MGMT = 1<<8,
+ IEEE80211_HW_AMPDU_AGGREGATION = 1<<9,
+ IEEE80211_HW_SUPPORTS_PS = 1<<10,
+ IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11,
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12,
+ IEEE80211_HW_MFP_CAPABLE = 1<<13,
};
/**
@@ -890,9 +922,8 @@ enum ieee80211_hw_flags {
* @workqueue: single threaded workqueue available for driver use,
* allocated by mac80211 on registration and flushed when an
* interface is removed.
- * NOTICE: All work performed on this workqueue should NEVER
- * acquire the RTNL lock (i.e. Don't use the function
- * ieee80211_iterate_active_interfaces())
+ * NOTICE: All work performed on this workqueue must not
+ * acquire the RTNL lock.
*
* @priv: pointer to private area that was allocated for driver use
* along with this structure.
@@ -952,6 +983,19 @@ struct ieee80211_hw {
};
/**
+ * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy
+ *
+ * @wiphy: the &struct wiphy which we want to query
+ *
+ * mac80211 drivers can use this to get to their respective
+ * &struct ieee80211_hw. Drivers wishing to get to their own private
+ * structure can then access it via hw->priv. Note that mac802111 drivers should
+ * not use wiphy_priv() to try to get their private driver structure as this
+ * is already used internally by mac80211.
+ */
+struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
+
+/**
* SET_IEEE80211_DEV - set device for 802.11 hardware
*
* @hw: the &struct ieee80211_hw to set the device for
@@ -978,11 +1022,6 @@ static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw)
return hw->queues;
}
-static inline int ieee80211_num_queues(struct ieee80211_hw *hw)
-{
- return hw->queues + hw->ampdu_queues;
-}
-
static inline struct ieee80211_rate *
ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
const struct ieee80211_tx_info *c)
@@ -1018,16 +1057,12 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
*
* The set_key() callback in the &struct ieee80211_ops for a given
* device is called to enable hardware acceleration of encryption and
- * decryption. The callback takes an @address parameter that will be
- * the broadcast address for default keys, the other station's hardware
- * address for individual keys or the zero address for keys that will
- * be used only for transmission.
+ * decryption. The callback takes a @sta parameter that will be NULL
+ * for default keys or keys used for transmission only, or point to
+ * the station information for the peer for individual keys.
* Multiple transmission keys with the same key index may be used when
* VLANs are configured for an access point.
*
- * The @local_address parameter will always be set to our own address,
- * this is only relevant if you support multiple local addresses.
- *
* When transmitting, the TX control data will use the @hw_key_idx
* selected by the driver by modifying the &struct ieee80211_key_conf
* pointed to by the @key parameter to the set_key() function.
@@ -1061,6 +1096,42 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
*/
/**
+ * DOC: Powersave support
+ *
+ * mac80211 has support for various powersave implementations.
+ *
+ * First, it can support hardware that handles all powersaving by
+ * itself, such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS
+ * hardware flag. In that case, it will be told about the desired
+ * powersave mode depending on the association status, and the driver
+ * must take care of sending nullfunc frames when necessary, i.e. when
+ * entering and leaving powersave mode. The driver is required to look at
+ * the AID in beacons and signal to the AP that it woke up when it finds
+ * traffic directed to it. This mode supports dynamic PS by simply
+ * enabling/disabling PS.
+ *
+ * Additionally, such hardware may set the %IEEE80211_HW_SUPPORTS_DYNAMIC_PS
+ * flag to indicate that it can support dynamic PS mode itself (see below).
+ *
+ * Other hardware designs cannot send nullfunc frames by themselves and also
+ * need software support for parsing the TIM bitmap. This is also supported
+ * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
+ * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
+ * required to pass up beacons. Additionally, in this case, mac80211 will
+ * wake up the hardware when multicast traffic is announced in the beacon.
+ *
+ * FIXME: I don't think we can be fast enough in software when we want to
+ * receive multicast traffic?
+ *
+ * Dynamic powersave mode is an extension to normal powersave mode in which
+ * the hardware stays awake for a user-specified period of time after sending
+ * a frame so that reply frames need not be buffered and therefore delayed
+ * to the next wakeup. This can either be supported by hardware, in which case
+ * the driver needs to look at the @dynamic_ps_timeout hardware configuration
+ * value, or by the stack if all nullfunc handling is in the stack.
+ */
+
+/**
* DOC: Frame filtering
*
* mac80211 requires to see many management frames for proper
@@ -1172,6 +1243,8 @@ enum ieee80211_ampdu_mlme_action {
* configuration in the TX control data. This handler should,
* preferably, never fail and stop queues appropriately, more
* importantly, however, it must never fail for A-MPDU-queues.
+ * This function should return NETDEV_TX_OK except in very
+ * limited cases.
* Must be implemented and atomic.
*
* @start: Called before the first netdevice attached to the hardware
@@ -1212,9 +1285,12 @@ enum ieee80211_ampdu_mlme_action {
*
* @config: Handler for configuration requests. IEEE 802.11 code calls this
* function to change hardware configuration, e.g., channel.
+ * This function should never fail but returns a negative error code
+ * if it does.
*
* @config_interface: Handler for configuration requests related to interfaces
* (e.g. BSSID changes.)
+ * Returns a negative error code which will be seen in userspace.
*
* @bss_info_changed: Handler for configuration requests related to BSS
* parameters that may vary during BSS's lifespan, and may affect low
@@ -1232,8 +1308,9 @@ enum ieee80211_ampdu_mlme_action {
*
* @set_key: See the section "Hardware crypto acceleration"
* This callback can sleep, and is only called between add_interface
- * and remove_interface calls, i.e. while the interface with the
- * given local_address is enabled.
+ * and remove_interface calls, i.e. while the given virtual interface
+ * is enabled.
+ * Returns a negative error code if the key can't be added.
*
* @update_tkip_key: See the section "Hardware crypto acceleration"
* This callback will be called in the context of Rx. Called for drivers
@@ -1245,8 +1322,16 @@ enum ieee80211_ampdu_mlme_action {
* bands. When the scan finishes, ieee80211_scan_completed() must be
* called; note that it also must be called when the scan cannot finish
* because the hardware is turned off! Anything else is a bug!
+ * Returns a negative error code which will be seen in userspace.
+ *
+ * @sw_scan_start: Notifier function that is called just before a software scan
+ * is started. Can be NULL, if the driver doesn't need this notification.
*
- * @get_stats: return low-level statistics
+ * @sw_scan_complete: Notifier function that is called just after a software scan
+ * finished. Can be NULL, if the driver doesn't need this notification.
+ *
+ * @get_stats: Return low-level statistics.
+ * Returns zero if statistics are available.
*
* @get_tkip_seq: If your device implements TKIP encryption in hardware this
* callback should be provided to read the TKIP transmit IVs (both IV32
@@ -1260,6 +1345,7 @@ enum ieee80211_ampdu_mlme_action {
*
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
* bursting) for a hardware TX queue.
+ * Returns a negative error code on failure.
*
* @get_tx_stats: Get statistics of the current TX queue status. This is used
* to get number of currently queued packets (queue length), maximum queue
@@ -1268,8 +1354,12 @@ enum ieee80211_ampdu_mlme_action {
* hw->ampdu_queues items.
*
* @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
- * this is only used for IBSS mode debugging and, as such, is not a
- * required function. Must be atomic.
+ * this is only used for IBSS mode BSSID merging and debugging. Is not a
+ * required function.
+ *
+ * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware.
+ * Currently, this is only used for IBSS mode debugging. Is not a
+ * required function.
*
* @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
* with other STAs in the IBSS. This is only used in IBSS mode. This
@@ -1279,13 +1369,15 @@ enum ieee80211_ampdu_mlme_action {
* @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
* This is needed only for IBSS mode and the result of this function is
* used to determine whether to reply to Probe Requests.
+ * Returns non-zero if this device sent the last beacon.
*
* @ampdu_action: Perform a certain A-MPDU action
* The RA/TID combination determines the destination and TID we want
* the ampdu action to be performed for. The action is defined through
* ieee80211_ampdu_mlme_action. Starting sequence number (@ssn)
- * is the first frame we expect to perform the action on. notice
+ * is the first frame we expect to perform the action on. Notice
* that TX/RX_STOP can pass NULL for this parameter.
+ * Returns a negative error code on failure.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1310,12 +1402,15 @@ struct ieee80211_ops {
int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
bool set);
int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- const u8 *local_address, const u8 *address,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
struct ieee80211_key_conf *key);
void (*update_tkip_key)(struct ieee80211_hw *hw,
struct ieee80211_key_conf *conf, const u8 *address,
u32 iv32, u16 *phase1key);
- int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len);
+ int (*hw_scan)(struct ieee80211_hw *hw,
+ struct cfg80211_scan_request *req);
+ void (*sw_scan_start)(struct ieee80211_hw *hw);
+ void (*sw_scan_complete)(struct ieee80211_hw *hw);
int (*get_stats)(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
@@ -1328,6 +1423,7 @@ struct ieee80211_ops {
int (*get_tx_stats)(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats);
u64 (*get_tsf)(struct ieee80211_hw *hw);
+ void (*set_tsf)(struct ieee80211_hw *hw, u64 tsf);
void (*reset_tsf)(struct ieee80211_hw *hw);
int (*tx_last_beacon)(struct ieee80211_hw *hw);
int (*ampdu_action)(struct ieee80211_hw *hw,
@@ -1752,8 +1848,9 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw);
* mac80211 that the scan finished.
*
* @hw: the hardware that finished the scan
+ * @aborted: set to true if scan was aborted
*/
-void ieee80211_scan_completed(struct ieee80211_hw *hw);
+void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
/**
* ieee80211_iterate_active_interfaces - iterate active interfaces
@@ -1886,6 +1983,16 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw,
/* Rate control API */
/**
+ * enum rate_control_changed - flags to indicate which parameter changed
+ *
+ * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have
+ * changed, rate control algorithm can update its internal state if needed.
+ */
+enum rate_control_changed {
+ IEEE80211_RC_HT_CHANGED = BIT(0)
+};
+
+/**
* struct ieee80211_tx_rate_control - rate control information for/from RC algo
*
* @hw: The hardware the algorithm is invoked for.
@@ -1921,6 +2028,9 @@ struct rate_control_ops {
void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
void (*rate_init)(void *priv, struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta);
+ void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta,
+ void *priv_sta, u32 changed);
void (*free_sta)(void *priv, struct ieee80211_sta *sta,
void *priv_sta);
@@ -1962,4 +2072,34 @@ rate_lowest_index(struct ieee80211_supported_band *sband,
int ieee80211_rate_control_register(struct rate_control_ops *ops);
void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
+static inline bool
+conf_is_ht20(struct ieee80211_conf *conf)
+{
+ return conf->channel_type == NL80211_CHAN_HT20;
+}
+
+static inline bool
+conf_is_ht40_minus(struct ieee80211_conf *conf)
+{
+ return conf->channel_type == NL80211_CHAN_HT40MINUS;
+}
+
+static inline bool
+conf_is_ht40_plus(struct ieee80211_conf *conf)
+{
+ return conf->channel_type == NL80211_CHAN_HT40PLUS;
+}
+
+static inline bool
+conf_is_ht40(struct ieee80211_conf *conf)
+{
+ return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf);
+}
+
+static inline bool
+conf_is_ht(struct ieee80211_conf *conf)
+{
+ return conf->channel_type != NL80211_CHAN_NO_HT;
+}
+
#endif /* MAC80211_H */