diff options
Diffstat (limited to 'include')
48 files changed, 784 insertions, 149 deletions
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index c3d6512..8845613 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -60,10 +60,6 @@ struct linux_binprm { unsigned long loader, exec; }; -extern void acct_arg_size(struct linux_binprm *bprm, unsigned long pages); -extern struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, - int write); - #define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0 #define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT) diff --git a/include/linux/filter.h b/include/linux/filter.h index 4609b85..9ee3f9f 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -131,6 +131,10 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define SKF_LL_OFF (-0x200000) #ifdef __KERNEL__ + +struct sk_buff; +struct sock; + struct sk_filter { atomic_t refcnt; @@ -146,9 +150,6 @@ static inline unsigned int sk_filter_len(const struct sk_filter *fp) return fp->len * sizeof(struct sock_filter) + sizeof(*fp); } -struct sk_buff; -struct sock; - extern int sk_filter(struct sock *sk, struct sk_buff *skb); extern unsigned int sk_run_filter(const struct sk_buff *skb, const struct sock_filter *filter); diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 4eb56ed..fffdf00 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -72,6 +72,7 @@ struct fsl_usb2_platform_data { void (*exit)(struct platform_device *); void __iomem *regs; /* ioremap'd register base */ struct clk *clk; + unsigned power_budget; /* hcd->power_budget */ unsigned big_endian_mmio:1; unsigned big_endian_desc:1; unsigned es:1; /* need USBMODE:ES */ @@ -79,6 +80,21 @@ struct fsl_usb2_platform_data { unsigned have_sysif_regs:1; unsigned invert_drvvbus:1; unsigned invert_pwr_fault:1; + + unsigned suspended:1; + unsigned already_suspended:1; + + /* register save area for suspend/resume */ + u32 pm_command; + u32 pm_status; + u32 pm_intr_enable; + u32 pm_frame_index; + u32 pm_segment; + u32 pm_frame_list; + u32 pm_async_next; + u32 pm_configured_flag; + u32 pm_portsc; + u32 pm_usbgenctrl; }; /* Flags in fsl_usb2_mph_platform_data */ diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 62f500c..51932e5 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -143,19 +143,18 @@ struct hrtimer_sleeper { */ struct hrtimer_clock_base { struct hrtimer_cpu_base *cpu_base; - clockid_t index; + int index; + clockid_t clockid; struct timerqueue_head active; ktime_t resolution; ktime_t (*get_time)(void); ktime_t softirq_time; -#ifdef CONFIG_HIGH_RES_TIMERS ktime_t offset; -#endif }; enum hrtimer_base_type { - HRTIMER_BASE_REALTIME, HRTIMER_BASE_MONOTONIC, + HRTIMER_BASE_REALTIME, HRTIMER_BASE_BOOTTIME, HRTIMER_MAX_CLOCK_BASES, }; @@ -164,7 +163,7 @@ enum hrtimer_base_type { * struct hrtimer_cpu_base - the per cpu clock bases * @lock: lock protecting the base and associated clock bases * and timers - * @clock_base: array of clock bases for this cpu + * @active_bases: Bitfield to mark bases with active timers * @expires_next: absolute time of the next event which was scheduled * via clock_set_next_event() * @hres_active: State of high resolution mode @@ -173,10 +172,11 @@ enum hrtimer_base_type { * @nr_retries: Total number of hrtimer interrupt retries * @nr_hangs: Total number of hrtimer interrupt hangs * @max_hang_time: Maximum time spent in hrtimer_interrupt + * @clock_base: array of clock bases for this cpu */ struct hrtimer_cpu_base { raw_spinlock_t lock; - struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES]; + unsigned long active_bases; #ifdef CONFIG_HIGH_RES_TIMERS ktime_t expires_next; int hres_active; @@ -186,6 +186,7 @@ struct hrtimer_cpu_base { unsigned long nr_hangs; ktime_t max_hang_time; #endif + struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES]; }; static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time) @@ -256,8 +257,6 @@ static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer) #ifdef CONFIG_HIGH_RES_TIMERS struct clock_event_device; -extern void clock_was_set(void); -extern void hres_timers_resume(void); extern void hrtimer_interrupt(struct clock_event_device *dev); /* @@ -291,16 +290,8 @@ extern void hrtimer_peek_ahead_timers(void); # define MONOTONIC_RES_NSEC LOW_RES_NSEC # define KTIME_MONOTONIC_RES KTIME_LOW_RES -/* - * clock_was_set() is a NOP for non- high-resolution systems. The - * time-sorted order guarantees that a timer does not expire early and - * is expired in the next softirq when the clock was advanced. - */ -static inline void clock_was_set(void) { } static inline void hrtimer_peek_ahead_timers(void) { } -static inline void hres_timers_resume(void) { } - /* * In non high resolution mode the time reference is taken from * the base softirq time variable. @@ -316,10 +307,18 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer) } #endif +extern void clock_was_set(void); +#ifdef CONFIG_TIMERFD +extern void timerfd_clock_was_set(void); +#else +static inline void timerfd_clock_was_set(void) { } +#endif +extern void hrtimers_resume(void); + extern ktime_t ktime_get(void); extern ktime_t ktime_get_real(void); extern ktime_t ktime_get_boottime(void); - +extern ktime_t ktime_get_monotonic_offset(void); DECLARE_PER_CPU(struct tick_device, tick_cpu_device); diff --git a/include/linux/ide.h b/include/linux/ide.h index 072fe8c..4255785 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -18,13 +18,13 @@ #include <linux/pci.h> #include <linux/completion.h> #include <linux/pm.h> +#include <linux/mutex.h> #ifdef CONFIG_BLK_DEV_IDEACPI #include <acpi/acpi.h> #endif #include <asm/byteorder.h> #include <asm/system.h> #include <asm/io.h> -#include <asm/mutex.h> /* for request_sense */ #include <linux/cdrom.h> diff --git a/include/linux/kvm.h b/include/linux/kvm.h index ea2dc1a..55ef181 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -541,6 +541,9 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_GET_PVINFO 57 #define KVM_CAP_PPC_IRQ_LEVEL 58 #define KVM_CAP_ASYNC_PF 59 +#define KVM_CAP_TSC_CONTROL 60 +#define KVM_CAP_GET_TSC_KHZ 61 +#define KVM_CAP_PPC_BOOKE_SREGS 62 #ifdef KVM_CAP_IRQ_ROUTING @@ -677,6 +680,9 @@ struct kvm_clock_data { #define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) /* Available with KVM_CAP_PPC_GET_PVINFO */ #define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo) +/* Available with KVM_CAP_TSC_CONTROL */ +#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) +#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) /* * ioctls for vcpu fds diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index ab42855..b9c3299 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -27,6 +27,10 @@ #include <asm/kvm_host.h> +#ifndef KVM_MMIO_SIZE +#define KVM_MMIO_SIZE 8 +#endif + /* * vcpu->requests bit members */ @@ -43,7 +47,6 @@ #define KVM_REQ_DEACTIVATE_FPU 10 #define KVM_REQ_EVENT 11 #define KVM_REQ_APF_HALT 12 -#define KVM_REQ_NMI 13 #define KVM_USERSPACE_IRQ_SOURCE_ID 0 @@ -133,7 +136,8 @@ struct kvm_vcpu { int mmio_read_completed; int mmio_is_write; int mmio_size; - unsigned char mmio_data[8]; + int mmio_index; + unsigned char mmio_data[KVM_MMIO_SIZE]; gpa_t mmio_phys_addr; #endif @@ -292,9 +296,10 @@ static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i) } #define kvm_for_each_vcpu(idx, vcpup, kvm) \ - for (idx = 0, vcpup = kvm_get_vcpu(kvm, idx); \ - idx < atomic_read(&kvm->online_vcpus) && vcpup; \ - vcpup = kvm_get_vcpu(kvm, ++idx)) + for (idx = 0; \ + idx < atomic_read(&kvm->online_vcpus) && \ + (vcpup = kvm_get_vcpu(kvm, idx)) != NULL; \ + idx++) int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id); void kvm_vcpu_uninit(struct kvm_vcpu *vcpu); @@ -365,7 +370,6 @@ pfn_t gfn_to_pfn_prot(struct kvm *kvm, gfn_t gfn, bool write_fault, bool *writable); pfn_t gfn_to_pfn_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, gfn_t gfn); -int memslot_id(struct kvm *kvm, gfn_t gfn); void kvm_release_pfn_dirty(pfn_t); void kvm_release_pfn_clean(pfn_t pfn); void kvm_set_pfn_dirty(pfn_t pfn); @@ -587,8 +591,17 @@ static inline int kvm_deassign_device(struct kvm *kvm, static inline void kvm_guest_enter(void) { + BUG_ON(preemptible()); account_system_vtime(current); current->flags |= PF_VCPU; + /* KVM does not hold any references to rcu protected data when it + * switches CPU into a guest mode. In fact switching to a guest mode + * is very similar to exiting to userspase from rcu point of view. In + * addition CPU may stay in a guest mode for quite a long time (up to + * one time slice). Lets treat guest mode as quiescent state, just like + * we do with user-mode execution. + */ + rcu_virt_note_context_switch(smp_processor_id()); } static inline void kvm_guest_exit(void) @@ -597,6 +610,11 @@ static inline void kvm_guest_exit(void) current->flags &= ~PF_VCPU; } +static inline int memslot_id(struct kvm *kvm, gfn_t gfn) +{ + return gfn_to_memslot(kvm, gfn)->id; +} + static inline unsigned long gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn) { diff --git a/include/linux/leds-regulator.h b/include/linux/leds-regulator.h index 5a8eb38..e2337a8 100644 --- a/include/linux/leds-regulator.h +++ b/include/linux/leds-regulator.h @@ -16,7 +16,7 @@ * Use "vled" as supply id when declaring the regulator consumer: * * static struct regulator_consumer_supply pcap_regulator_VVIB_consumers [] = { - * { .dev_name = "leds-regulator.0", supply = "vled" }, + * { .dev_name = "leds-regulator.0", .supply = "vled" }, * }; * * If you have several regulator driven LEDs, you can append a numerical id to diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 466b1c7..d12f8d6 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -32,6 +32,10 @@ struct wm8994_ldo_pdata { #define WM8994_EQ_REGS 20 #define WM8958_MBC_CUTOFF_REGS 20 #define WM8958_MBC_COEFF_REGS 48 +#define WM8958_MBC_COMBINED_REGS 56 +#define WM8958_VSS_HPF_REGS 2 +#define WM8958_VSS_REGS 148 +#define WM8958_ENH_EQ_REGS 32 /** * DRC configurations are specified with a label and a set of register @@ -71,6 +75,42 @@ struct wm8958_mbc_cfg { const char *name; u16 cutoff_regs[WM8958_MBC_CUTOFF_REGS]; u16 coeff_regs[WM8958_MBC_COEFF_REGS]; + + /* Coefficient layout when using MBC+VSS firmware */ + u16 combined_regs[WM8958_MBC_COMBINED_REGS]; +}; + +/** + * VSS HPF configurations are specified with a label and two values to + * write. Configurations are expected to be generated using the + * multiband compressor configuration panel in WISCE - see + * http://www.wolfsonmicro.com/wisce/ + */ +struct wm8958_vss_hpf_cfg { + const char *name; + u16 regs[WM8958_VSS_HPF_REGS]; +}; + +/** + * VSS configurations are specified with a label and array of values + * to write. Configurations are expected to be generated using the + * multiband compressor configuration panel in WISCE - see + * http://www.wolfsonmicro.com/wisce/ + */ +struct wm8958_vss_cfg { + const char *name; + u16 regs[WM8958_VSS_REGS]; +}; + +/** + * Enhanced EQ configurations are specified with a label and array of + * values to write. Configurations are expected to be generated using + * the multiband compressor configuration panel in WISCE - see + * http://www.wolfsonmicro.com/wisce/ + */ +struct wm8958_enh_eq_cfg { + const char *name; + u16 regs[WM8958_ENH_EQ_REGS]; }; struct wm8994_pdata { @@ -95,6 +135,15 @@ struct wm8994_pdata { int num_mbc_cfgs; struct wm8958_mbc_cfg *mbc_cfgs; + int num_vss_cfgs; + struct wm8958_vss_cfg *vss_cfgs; + + int num_vss_hpf_cfgs; + struct wm8958_vss_hpf_cfg *vss_hpf_cfgs; + + int num_enh_eq_cfgs; + struct wm8958_enh_eq_cfg *enh_eq_cfgs; + /* LINEOUT can be differential or single ended */ unsigned int lineout1_diff:1; unsigned int lineout2_diff:1; diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 8768c46..7454ad7 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -107,7 +107,7 @@ struct nilfs_super_root { #define NILFS_SR_DAT_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 0) #define NILFS_SR_CPFILE_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 1) #define NILFS_SR_SUFILE_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 2) -#define NILFS_SR_BYTES (sizeof(struct nilfs_super_root)) +#define NILFS_SR_BYTES(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 3) /* * Maximal mount counts @@ -845,5 +845,7 @@ struct nilfs_bdesc { _IOR(NILFS_IOCTL_IDENT, 0x8A, __u64) #define NILFS_IOCTL_RESIZE \ _IOW(NILFS_IOCTL_IDENT, 0x8B, __u64) +#define NILFS_IOCTL_SET_ALLOC_RANGE \ + _IOW(NILFS_IOCTL_IDENT, 0x8C, __u64[2]) #endif /* _LINUX_NILFS_FS_H */ diff --git a/include/linux/nmi.h b/include/linux/nmi.h index c536f85..2d304ef 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -45,11 +45,12 @@ static inline bool trigger_all_cpu_backtrace(void) #ifdef CONFIG_LOCKUP_DETECTOR int hw_nmi_is_cpu_stuck(struct pt_regs *); -u64 hw_nmi_get_sample_period(void); +u64 hw_nmi_get_sample_period(int watchdog_thresh); extern int watchdog_enabled; +extern int watchdog_thresh; struct ctl_table; -extern int proc_dowatchdog_enabled(struct ctl_table *, int , - void __user *, size_t *, loff_t *); +extern int proc_dowatchdog(struct ctl_table *, int , + void __user *, size_t *, loff_t *); #endif #endif diff --git a/include/linux/notifier.h b/include/linux/notifier.h index 621dfa1..c0688b0 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -209,8 +209,9 @@ static inline int notifier_to_errno(int ret) #define NETDEV_POST_TYPE_CHANGE 0x000F #define NETDEV_POST_INIT 0x0010 #define NETDEV_UNREGISTER_BATCH 0x0011 -#define NETDEV_BONDING_DESLAVE 0x0012 +#define NETDEV_RELEASE 0x0012 #define NETDEV_NOTIFY_PEERS 0x0013 +#define NETDEV_JOIN 0x0014 #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h index 7f1183d..34c4498 100644 --- a/include/linux/posix-clock.h +++ b/include/linux/posix-clock.h @@ -45,7 +45,7 @@ struct posix_clock; * @timer_create: Create a new timer * @timer_delete: Remove a previously created timer * @timer_gettime: Get remaining time and interval of a timer - * @timer_setttime: Set a timer's initial expiration and interval + * @timer_settime: Set a timer's initial expiration and interval * @fasync: Optional character device fasync method * @mmap: Optional character device mmap method * @open: Optional character device open method diff --git a/include/linux/pti.h b/include/linux/pti.h new file mode 100644 index 0000000..81af667 --- /dev/null +++ b/include/linux/pti.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) Intel 2011 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * The PTI (Parallel Trace Interface) driver directs trace data routed from + * various parts in the system out through the Intel Penwell PTI port and + * out of the mobile device for analysis with a debugging tool + * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7, + * compact JTAG, standard. + * + * This header file will allow other parts of the OS to use the + * interface to write out it's contents for debugging a mobile system. + */ + +#ifndef PTI_H_ +#define PTI_H_ + +/* offset for last dword of any PTI message. Part of MIPI P1149.7 */ +#define PTI_LASTDWORD_DTS 0x30 + +/* basic structure used as a write address to the PTI HW */ +struct pti_masterchannel { + u8 master; + u8 channel; +}; + +/* the following functions are defined in misc/pti.c */ +void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count); +struct pti_masterchannel *pti_request_masterchannel(u8 type); +void pti_release_masterchannel(struct pti_masterchannel *mc); + +#endif /*PTI_H_*/ diff --git a/include/linux/sched.h b/include/linux/sched.h index 885c4f2..aaf71e0 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -315,7 +315,6 @@ extern int proc_dowatchdog_thresh(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); extern unsigned int softlockup_panic; -extern int softlockup_thresh; void lockup_detector_init(void); #else static inline void touch_softlockup_watchdog(void) @@ -787,17 +786,39 @@ enum cpu_idle_type { }; /* - * sched-domains (multiprocessor balancing) declarations: + * Increase resolution of nice-level calculations for 64-bit architectures. + * The extra resolution improves shares distribution and load balancing of + * low-weight task groups (eg. nice +19 on an autogroup), deeper taskgroup + * hierarchies, especially on larger systems. This is not a user-visible change + * and does not change the user-interface for setting shares/weights. + * + * We increase resolution only if we have enough bits to allow this increased + * resolution (i.e. BITS_PER_LONG > 32). The costs for increasing resolution + * when BITS_PER_LONG <= 32 are pretty high and the returns do not justify the + * increased costs. */ +#if BITS_PER_LONG > 32 +# define SCHED_LOAD_RESOLUTION 10 +# define scale_load(w) ((w) << SCHED_LOAD_RESOLUTION) +# define scale_load_down(w) ((w) >> SCHED_LOAD_RESOLUTION) +#else +# define SCHED_LOAD_RESOLUTION 0 +# define scale_load(w) (w) +# define scale_load_down(w) (w) +#endif -/* - * Increase resolution of nice-level calculations: - */ -#define SCHED_LOAD_SHIFT 10 +#define SCHED_LOAD_SHIFT (10 + SCHED_LOAD_RESOLUTION) #define SCHED_LOAD_SCALE (1L << SCHED_LOAD_SHIFT) -#define SCHED_LOAD_SCALE_FUZZ SCHED_LOAD_SCALE +/* + * Increase resolution of cpu_power calculations + */ +#define SCHED_POWER_SHIFT 10 +#define SCHED_POWER_SCALE (1L << SCHED_POWER_SHIFT) +/* + * sched-domains (multiprocessor balancing) declarations: + */ #ifdef CONFIG_SMP #define SD_LOAD_BALANCE 0x0001 /* Do load balancing on this domain. */ #define SD_BALANCE_NEWIDLE 0x0002 /* Balance when about to become idle */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 758c5b0..a5c3114 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -45,7 +45,8 @@ #define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ #define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ #define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */ -#define PORT_MAX_8250 19 /* max port ID */ +#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ +#define PORT_MAX_8250 20 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -202,6 +203,9 @@ /* VIA VT8500 SoC */ #define PORT_VT8500 97 +/* Xilinx PSS UART */ +#define PORT_XUARTPS 98 + #ifdef __KERNEL__ #include <linux/compiler.h> diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index 3ecb71a..c75bda3 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -57,6 +57,7 @@ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654 * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750 * TI16C752: 8 16 56 60 8 16 32 56 + * Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA */ #define UART_FCR_R_TRIG_00 0x00 #define UART_FCR_R_TRIG_01 0x40 @@ -118,6 +119,7 @@ #define UART_MCR_DTR 0x01 /* DTR complement */ #define UART_LSR 5 /* In: Line Status Register */ +#define UART_LSR_FIFOE 0x80 /* Fifo error */ #define UART_LSR_TEMT 0x40 /* Transmitter empty */ #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ #define UART_LSR_BI 0x10 /* Break interrupt indicator */ diff --git a/include/linux/sht15.h b/include/linux/sht15.h index 046bce0..f85c7c5 100644 --- a/include/linux/sht15.h +++ b/include/linux/sht15.h @@ -8,17 +8,27 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/sht15 file. */ /** * struct sht15_platform_data - sht15 connectivity info - * @gpio_data: no. of gpio to which bidirectional data line is connected - * @gpio_sck: no. of gpio to which the data clock is connected. - * @supply_mv: supply voltage in mv. Overridden by regulator if available. - **/ + * @gpio_data: no. of gpio to which bidirectional data line is + * connected. + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if + * available. + * @checksum: flag to indicate the checksum should be validated. + * @no_otp_reload: flag to indicate no reload from OTP. + * @low_resolution: flag to indicate the temp/humidity resolution to use. + */ struct sht15_platform_data { int gpio_data; int gpio_sck; int supply_mv; + bool checksum; + bool no_otp_reload; + bool low_resolution; }; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 79aafbb..e8b78ce 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1442,7 +1442,7 @@ extern int ___pskb_trim(struct sk_buff *skb, unsigned int len); static inline void __skb_trim(struct sk_buff *skb, unsigned int len) { - if (unlikely(skb->data_len)) { + if (unlikely(skb_is_nonlinear(skb))) { WARN_ON(1); return; } @@ -1782,7 +1782,7 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) #define skb_queue_walk(queue, skb) \ for (skb = (queue)->next; \ - prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \ + skb != (struct sk_buff *)(queue); \ skb = skb->next) #define skb_queue_walk_safe(queue, skb, tmp) \ @@ -1791,7 +1791,7 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) skb = tmp, tmp = skb->next) #define skb_queue_walk_from(queue, skb) \ - for (; prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \ + for (; skb != (struct sk_buff *)(queue); \ skb = skb->next) #define skb_queue_walk_from_safe(queue, skb, tmp) \ @@ -1801,7 +1801,7 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) #define skb_queue_reverse_walk(queue, skb) \ for (skb = (queue)->prev; \ - prefetch(skb->prev), (skb != (struct sk_buff *)(queue)); \ + skb != (struct sk_buff *)(queue); \ skb = skb->prev) #define skb_queue_reverse_walk_safe(queue, skb, tmp) \ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 45ca123..c8668d1 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -37,9 +37,7 @@ enum stat_item { struct kmem_cache_cpu { void **freelist; /* Pointer to next available object */ -#ifdef CONFIG_CMPXCHG_LOCAL unsigned long tid; /* Globally unique transaction id */ -#endif struct page *page; /* The slab from which we are allocating */ int node; /* The node of the page (or -1 for debug) */ #ifdef CONFIG_SLUB_STATS @@ -179,7 +177,8 @@ static __always_inline int kmalloc_index(size_t size) if (size <= 4 * 1024) return 12; /* * The following is only needed to support architectures with a larger page - * size than 4k. + * size than 4k. We need to support 2 * PAGE_SIZE here. So for a 64k page + * size we would have to go up to 128k. */ if (size <= 8 * 1024) return 13; if (size <= 16 * 1024) return 14; @@ -190,7 +189,8 @@ static __always_inline int kmalloc_index(size_t size) if (size <= 512 * 1024) return 19; if (size <= 1024 * 1024) return 20; if (size <= 2 * 1024 * 1024) return 21; - return -1; + BUG(); + return -1; /* Will never be reached */ /* * What we really wanted to do and cannot do because of compiler issues is: diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h index 20fc303..8d03f07 100644 --- a/include/linux/thread_info.h +++ b/include/linux/thread_info.h @@ -29,7 +29,7 @@ struct restart_block { } futex; /* For nanosleep */ struct { - clockid_t index; + clockid_t clockid; struct timespec __user *rmtp; #ifdef CONFIG_COMPAT struct compat_timespec __user *compat_rmtp; diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h index 2d07929..d3b57fa 100644 --- a/include/linux/timerfd.h +++ b/include/linux/timerfd.h @@ -19,6 +19,7 @@ * shared O_* flags. */ #define TFD_TIMER_ABSTIME (1 << 0) +#define TFD_TIMER_CANCEL_ON_SET (1 << 1) #define TFD_CLOEXEC O_CLOEXEC #define TFD_NONBLOCK O_NONBLOCK @@ -26,6 +27,6 @@ /* Flags for timerfd_create. */ #define TFD_CREATE_FLAGS TFD_SHARED_FCNTL_FLAGS /* Flags for timerfd_settime. */ -#define TFD_SETTIME_FLAGS TFD_TIMER_ABSTIME +#define TFD_SETTIME_FLAGS (TFD_TIMER_ABSTIME | TFD_TIMER_CANCEL_ON_SET) #endif /* _LINUX_TIMERFD_H */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 9f469c7..d6f0529 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -50,6 +50,8 @@ #define N_CAIF 20 /* CAIF protocol for talking to modems */ #define N_GSM0710 21 /* GSM 0710 Mux */ #define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ +#define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */ +#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ /* * This character is the same as _POSIX_VDISABLE: it cannot be used as @@ -472,6 +474,7 @@ extern int tty_add_file(struct tty_struct *tty, struct file *file); extern void free_tty_struct(struct tty_struct *tty); extern void initialize_tty_struct(struct tty_struct *tty, struct tty_driver *driver, int idx); +extern void deinitialize_tty_struct(struct tty_struct *tty); extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, int first_ok); extern int tty_release(struct inode *inode, struct file *filp); @@ -525,6 +528,7 @@ extern int tty_set_ldisc(struct tty_struct *tty, int ldisc); extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty); extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty); extern void tty_ldisc_init(struct tty_struct *tty); +extern void tty_ldisc_deinit(struct tty_struct *tty); extern void tty_ldisc_begin(void); /* This last one is just for the tty layer internals and shouldn't be used elsewhere */ extern void tty_ldisc_enable(struct tty_struct *tty); diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index ff7dc08..5b07792 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -76,7 +76,7 @@ * tty device. It is solely the responsibility of the line * discipline to handle poll requests. * - * void (*receive_buf)(struct tty_struct *, const unsigned char *cp, + * unsigned int (*receive_buf)(struct tty_struct *, const unsigned char *cp, * char *fp, int count); * * This function is called by the low-level tty driver to send @@ -84,7 +84,8 @@ * processing. <cp> is a pointer to the buffer of input * character received by the device. <fp> is a pointer to a * pointer of flag bytes which indicate whether a character was - * received with a parity error, etc. + * received with a parity error, etc. Returns the amount of bytes + * received. * * void (*write_wakeup)(struct tty_struct *); * @@ -140,8 +141,8 @@ struct tty_ldisc_ops { /* * The following routines are called from below. */ - void (*receive_buf)(struct tty_struct *, const unsigned char *cp, - char *fp, int count); + unsigned int (*receive_buf)(struct tty_struct *, + const unsigned char *cp, char *fp, int count); void (*write_wakeup)(struct tty_struct *); void (*dcd_change)(struct tty_struct *, unsigned int, struct pps_event_time *); diff --git a/include/linux/usb.h b/include/linux/usb.h index 65f78ca..73c7df4 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -806,8 +806,10 @@ struct usbdrv_wrap { * @resume: Called when the device is being resumed by the system. * @reset_resume: Called when the suspended device has been reset instead * of being resumed. - * @pre_reset: Called by usb_reset_device() when the device - * is about to be reset. + * @pre_reset: Called by usb_reset_device() when the device is about to be + * reset. This routine must not return until the driver has no active + * URBs for the device, and no more URBs may be submitted until the + * post_reset method is called. * @post_reset: Called by usb_reset_device() after the device * has been reset * @id_table: USB drivers use ID table to support hotplugging. diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index b72f305..0fd3fbd 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -579,7 +579,7 @@ struct usb_ss_ep_comp_descriptor { __u8 bMaxBurst; __u8 bmAttributes; - __u16 wBytesPerInterval; + __le16 wBytesPerInterval; } __attribute__ ((packed)); #define USB_DT_SS_EP_COMP_SIZE 6 diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 882a084..b78cba4 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -37,6 +37,14 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +/* + * USB function drivers should return USB_GADGET_DELAYED_STATUS if they + * wish to delay the data/status stages of the control transfer till they + * are ready. The control transfer will then be kept from completing till + * all the function drivers that requested for USB_GADGET_DELAYED_STAUS + * invoke usb_composite_setup_continue(). + */ +#define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ struct usb_configuration; @@ -285,6 +293,7 @@ struct usb_composite_driver { extern int usb_composite_probe(struct usb_composite_driver *driver, int (*bind)(struct usb_composite_dev *cdev)); extern void usb_composite_unregister(struct usb_composite_driver *driver); +extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); /** @@ -342,7 +351,12 @@ struct usb_composite_dev { */ unsigned deactivations; - /* protects at least deactivation count */ + /* the composite driver won't complete the control transfer's + * data/status stages till delayed_status is zero. + */ + int delayed_status; + + /* protects deactivations and delayed_status counts*/ spinlock_t lock; }; diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index e49dfd4..7cc95ee 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -25,10 +25,15 @@ struct ehci_caps { /* these fields are specified as 8 and 16 bit registers, * but some hosts can't perform 8 or 16 bit PCI accesses. + * some hosts treat caplength and hciversion as parts of a 32-bit + * register, others treat them as two separate registers, this + * affects the memory map for big endian controllers. */ u32 hc_capbase; -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ +#define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \ + (ehci_big_endian_capbase(ehci) ? 24 : 0))) +#define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \ + (ehci_big_endian_capbase(ehci) ? 0 : 16))) u32 hcs_params; /* HCSPARAMS - offset 0x4 */ #define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ @@ -52,7 +57,7 @@ struct ehci_caps { #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ #define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ u8 portroute[8]; /* nibbles for routing - offset 0xC */ -} __attribute__ ((packed)); +}; /* Section 2.3 Host Controller Operational Registers */ @@ -150,7 +155,7 @@ struct ehci_regs { #define PORT_CSC (1<<1) /* connect status change */ #define PORT_CONNECT (1<<0) /* device connected */ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -} __attribute__ ((packed)); +}; #define USBMODE 0x68 /* USB Device mode */ #define USBMODE_SDIS (1<<3) /* Stream disable */ @@ -194,7 +199,7 @@ struct ehci_dbg_port { u32 data47; u32 address; #define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) -} __attribute__ ((packed)); +}; #ifdef CONFIG_EARLY_PRINTK_DBGP #include <linux/init.h> diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index e538172..dd1571d 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -890,8 +890,8 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v) /* utility wrapping a simple endpoint selection policy */ extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, - struct usb_endpoint_descriptor *) __devinit; + struct usb_endpoint_descriptor *); -extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit; +extern void usb_ep_autoconfig_reset(struct usb_gadget *); #endif /* __LINUX_USB_GADGET_H */ diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 3657403..00311fe 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -2,7 +2,7 @@ * * Copyright (C) 2008 Google, Inc. * Author: Brian Swetland <swetland@google.com> - * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -54,6 +54,64 @@ enum otg_control_type { }; /** + * PHY used in + * + * INVALID_PHY Unsupported PHY + * CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY + * SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY + * + */ +enum msm_usb_phy_type { + INVALID_PHY = 0, + CI_45NM_INTEGRATED_PHY, + SNPS_28NM_INTEGRATED_PHY, +}; + +#define IDEV_CHG_MAX 1500 +#define IUNIT 100 + +/** + * Different states involved in USB charger detection. + * + * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection + * process is not yet started. + * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact. + * USB_CHG_STATE_DCD_DONE Data pin contact is detected. + * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects + * between SDP and DCP/CDP). + * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects + * between DCP and CDP). + * USB_CHG_STATE_DETECTED USB charger type is determined. + * + */ +enum usb_chg_state { + USB_CHG_STATE_UNDEFINED = 0, + USB_CHG_STATE_WAIT_FOR_DCD, + USB_CHG_STATE_DCD_DONE, + USB_CHG_STATE_PRIMARY_DONE, + USB_CHG_STATE_SECONDARY_DONE, + USB_CHG_STATE_DETECTED, +}; + +/** + * USB charger types + * + * USB_INVALID_CHARGER Invalid USB charger. + * USB_SDP_CHARGER Standard downstream port. Refers to a downstream port + * on USB2.0 compliant host/hub. + * USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger). + * USB_CDP_CHARGER Charging downstream port. Enumeration can happen and + * IDEV_CHG_MAX can be drawn irrespective of USB state. + * + */ +enum usb_chg_type { + USB_INVALID_CHARGER = 0, + USB_SDP_CHARGER, + USB_DCP_CHARGER, + USB_CDP_CHARGER, +}; + +/** * struct msm_otg_platform_data - platform device data * for msm_otg driver. * @phy_init_seq: PHY configuration sequence. val, reg pairs @@ -64,7 +122,8 @@ enum otg_control_type { * @otg_control: OTG switch controlled by user/Id pin * @default_mode: Default operational mode. Applicable only if * OTG switch is controller by user. - * + * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k + * dfab_usb_hs_clk in case of 8660 and 8960. */ struct msm_otg_platform_data { int *phy_init_seq; @@ -73,7 +132,9 @@ struct msm_otg_platform_data { enum usb_mode_type mode; enum otg_control_type otg_control; enum usb_mode_type default_mode; + enum msm_usb_phy_type phy_type; void (*setup_gpio)(enum usb_otg_state state); + char *pclk_src_name; }; /** @@ -83,6 +144,7 @@ struct msm_otg_platform_data { * @irq: IRQ number assigned for HSUSB controller. * @clk: clock struct of usb_hs_clk. * @pclk: clock struct of usb_hs_pclk. + * @pclk_src: pclk source for voting. * @phy_reset_clk: clock struct of usb_phy_clk. * @core_clk: clock struct of usb_hs_core_clk. * @regs: ioremapped register base address. @@ -90,7 +152,12 @@ struct msm_otg_platform_data { * @sm_work: OTG state machine work. * @in_lpm: indicates low power mode (LPM) state. * @async_int: Async interrupt arrived. - * + * @cur_power: The amount of mA available from downstream port. + * @chg_work: Charger detection work. + * @chg_state: The state of charger detection process. + * @chg_type: The type of charger attached. + * @dcd_retires: The retry count used to track Data contact + * detection process. */ struct msm_otg { struct otg_transceiver otg; @@ -98,6 +165,7 @@ struct msm_otg { int irq; struct clk *clk; struct clk *pclk; + struct clk *pclk_src; struct clk *phy_reset_clk; struct clk *core_clk; void __iomem *regs; @@ -107,6 +175,11 @@ struct msm_otg { struct work_struct sm_work; atomic_t in_lpm; int async_int; + unsigned cur_power; + struct delayed_work chg_work; + enum usb_chg_state chg_state; + enum usb_chg_type chg_type; + u8 dcd_retries; }; #endif diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index 7d1babb..6e97a2d 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -24,6 +24,7 @@ #define USB_PORTSC (MSM_USB_BASE + 0x0184) #define USB_OTGSC (MSM_USB_BASE + 0x01A4) #define USB_USBMODE (MSM_USB_BASE + 0x01A8) +#define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) #define USBCMD_RESET 2 #define USB_USBINTR (MSM_USB_BASE + 0x0148) @@ -42,6 +43,7 @@ #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ +#define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ /* OTG definitions */ #define OTGSC_INTSTS_MASK (0x7f << 16) diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 6e40718..d87f44f 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -168,6 +168,7 @@ otg_shutdown(struct otg_transceiver *otg) #ifdef CONFIG_USB_OTG_UTILS extern struct otg_transceiver *otg_get_transceiver(void); extern void otg_put_transceiver(struct otg_transceiver *); +extern const char *otg_state_string(enum usb_otg_state state); #else static inline struct otg_transceiver *otg_get_transceiver(void) { @@ -177,6 +178,11 @@ static inline struct otg_transceiver *otg_get_transceiver(void) static inline void otg_put_transceiver(struct otg_transceiver *x) { } + +static inline const char *otg_state_string(enum usb_otg_state state) +{ + return NULL; +} #endif /* Context: can sleep */ diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h new file mode 100644 index 0000000..3a7f1d9 --- /dev/null +++ b/include/linux/usb/renesas_usbhs.h @@ -0,0 +1,156 @@ +/* + * Renesas USB + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#ifndef RENESAS_USB_H +#define RENESAS_USB_H +#include <linux/platform_device.h> +#include <linux/usb/ch9.h> + +/* + * module type + * + * it will be return value from get_id + */ +enum { + USBHS_HOST = 0, + USBHS_GADGET, + USBHS_MAX, +}; + +/* + * callback functions table for driver + * + * These functions are called from platform for driver. + * Callback function's pointer will be set before + * renesas_usbhs_platform_callback :: hardware_init was called + */ +struct renesas_usbhs_driver_callback { + int (*notify_hotplug)(struct platform_device *pdev); +}; + +/* + * callback functions for platform + * + * These functions are called from driver for platform + */ +struct renesas_usbhs_platform_callback { + + /* + * option: + * + * Hardware init function for platform. + * it is called when driver was probed. + */ + int (*hardware_init)(struct platform_device *pdev); + + /* + * option: + * + * Hardware exit function for platform. + * it is called when driver was removed + */ + void (*hardware_exit)(struct platform_device *pdev); + + /* + * option: + * + * Phy reset for platform + */ + void (*phy_reset)(struct platform_device *pdev); + + /* + * get USB ID function + * - USBHS_HOST + * - USBHS_GADGET + */ + int (*get_id)(struct platform_device *pdev); + + /* + * get VBUS status function. + */ + int (*get_vbus)(struct platform_device *pdev); +}; + +/* + * parameters for renesas usbhs + * + * some register needs USB chip specific parameters. + * This struct show it to driver + */ +struct renesas_usbhs_driver_param { + /* + * pipe settings + */ + u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */ + int pipe_size; /* pipe_type array size */ + + /* + * option: + * + * for BUSWAIT :: BWAIT + * */ + int buswait_bwait; + + /* + * option: + * + * delay time from notify_hotplug callback + */ + int detection_delay; +}; + +/* + * option: + * + * platform information for renesas_usbhs driver. + */ +struct renesas_usbhs_platform_info { + /* + * option: + * + * platform set these functions before + * call platform_add_devices if needed + */ + struct renesas_usbhs_platform_callback platform_callback; + + /* + * driver set these callback functions pointer. + * platform can use it on callback functions + */ + struct renesas_usbhs_driver_callback driver_callback; + + /* + * option: + * + * driver use these param for some register + */ + struct renesas_usbhs_driver_param driver_param; +}; + +/* + * macro for platform + */ +#define renesas_usbhs_get_info(pdev)\ + ((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data) + +#define renesas_usbhs_call_notify_hotplug(pdev) \ + ({ \ + struct renesas_usbhs_driver_callback *dc; \ + dc = &(renesas_usbhs_get_info(pdev)->driver_callback); \ + if (dc && dc->notify_hotplug) \ + dc->notify_hotplug(pdev); \ + }) +#endif /* RENESAS_USB_H */ diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h index c8b07a9..35bc788 100644 --- a/include/net/caif/caif_layer.h +++ b/include/net/caif/caif_layer.h @@ -15,7 +15,6 @@ struct cfpktq; struct caif_payload_info; struct caif_packet_funcs; - #define CAIF_LAYER_NAME_SZ 16 /** @@ -33,7 +32,6 @@ do { \ } \ } while (0) - /** * enum caif_ctrlcmd - CAIF Stack Control Signaling sent in layer.ctrlcmd(). * @@ -141,7 +139,7 @@ enum caif_direction { * - All layers must use this structure. If embedding it, then place this * structure first in the layer specific structure. * - * - Each layer should not depend on any others layer private data. + * - Each layer should not depend on any others layer's private data. * * - In order to send data upwards do * layer->up->receive(layer->up, packet); @@ -155,16 +153,23 @@ struct cflayer { struct list_head node; /* - * receive() - Receive Function. + * receive() - Receive Function (non-blocking). * Contract: Each layer must implement a receive function passing the * CAIF packets upwards in the stack. * Packet handling rules: - * - The CAIF packet (cfpkt) cannot be accessed after - * passing it to the next layer using up->receive(). + * - The CAIF packet (cfpkt) ownership is passed to the + * called receive function. This means that the the + * packet cannot be accessed after passing it to the + * above layer using up->receive(). + * * - If parsing of the packet fails, the packet must be - * destroyed and -1 returned from the function. + * destroyed and negative error code returned + * from the function. + * EXCEPTION: If the framing layer (cffrml) returns + * -EILSEQ, the packet is not freed. + * * - If parsing succeeds (and above layers return OK) then - * the function must return a value > 0. + * the function must return a value >= 0. * * Returns result < 0 indicates an error, 0 or positive value * indicates success. @@ -176,7 +181,7 @@ struct cflayer { int (*receive)(struct cflayer *layr, struct cfpkt *cfpkt); /* - * transmit() - Transmit Function. + * transmit() - Transmit Function (non-blocking). * Contract: Each layer must implement a transmit function passing the * CAIF packet downwards in the stack. * Packet handling rules: @@ -185,15 +190,16 @@ struct cflayer { * cannot be accessed after passing it to the below * layer using dn->transmit(). * - * - If transmit fails, however, the ownership is returned - * to thecaller. The caller of "dn->transmit()" must - * destroy or resend packet. + * - Upon error the packet ownership is still passed on, + * so the packet shall be freed where error is detected. + * Callers of the transmit function shall not free packets, + * but errors shall be returned. * * - Return value less than zero means error, zero or * greater than zero means OK. * - * result < 0 indicates an error, 0 or positive value - * indicate success. + * Returns result < 0 indicates an error, 0 or positive value + * indicates success. * * @layr: Pointer to the current layer the receive function * isimplemented for (this pointer). @@ -202,7 +208,7 @@ struct cflayer { int (*transmit) (struct cflayer *layr, struct cfpkt *cfpkt); /* - * cttrlcmd() - Control Function upwards in CAIF Stack. + * cttrlcmd() - Control Function upwards in CAIF Stack (non-blocking). * Used for signaling responses (CAIF_CTRLCMD_*_RSP) * and asynchronous events from the modem (CAIF_CTRLCMD_*_IND) * diff --git a/include/net/genetlink.h b/include/net/genetlink.h index b4c7c1c..d420f28 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -260,7 +260,7 @@ static inline int genlmsg_reply(struct sk_buff *skb, struct genl_info *info) /** * gennlmsg_data - head of message payload - * @gnlh: genetlink messsage header + * @gnlh: genetlink message header */ static inline void *genlmsg_data(const struct genlmsghdr *gnlh) { diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8c7189c..e6d6a66 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -538,7 +538,7 @@ struct ieee80211_tx_info { }; /** - * ieee80211_sched_scan_ies - scheduled scan IEs + * struct ieee80211_sched_scan_ies - scheduled scan IEs * * This structure is used to pass the appropriate IEs to be used in scheduled * scans for all bands. It contains both the IEs passed from the userspace @@ -2278,6 +2278,7 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta, /** * ieee80211_sta_set_tim - set the TIM bit for a sleeping station + * @sta: &struct ieee80211_sta pointer for the sleeping station * * If a driver buffers frames for a powersave station instead of passing * them back to mac80211 for retransmission, the station needs to be told diff --git a/include/net/netlink.h b/include/net/netlink.h index 8a3906a..02740a9 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -290,7 +290,7 @@ static inline int nlmsg_padlen(int payload) /** * nlmsg_data - head of message payload - * @nlh: netlink messsage header + * @nlh: netlink message header */ static inline void *nlmsg_data(const struct nlmsghdr *nlh) { diff --git a/include/sound/ak4641.h b/include/sound/ak4641.h new file mode 100644 index 0000000..96d1991 --- /dev/null +++ b/include/sound/ak4641.h @@ -0,0 +1,26 @@ +/* + * AK4641 ALSA SoC Codec driver + * + * Copyright 2009 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __AK4641_H +#define __AK4641_H + +/** + * struct ak4641_platform_data - platform specific AK4641 configuration + * @gpio_power: GPIO to control external power to AK4641 + * @gpio_npdn: GPIO connected to AK4641 nPDN pin + * + * Both GPIO parameters are optional. + */ +struct ak4641_platform_data { + int gpio_power; + int gpio_npdn; +}; + +#endif /* __AK4641_H */ diff --git a/include/sound/control.h b/include/sound/control.h index 404acb8..1a94a21 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -113,6 +113,7 @@ struct snd_kcontrol *snd_ctl_new1(const struct snd_kcontrol_new * kcontrolnew, v void snd_ctl_free_one(struct snd_kcontrol * kcontrol); int snd_ctl_add(struct snd_card * card, struct snd_kcontrol * kcontrol); int snd_ctl_remove(struct snd_card * card, struct snd_kcontrol * kcontrol); +int snd_ctl_replace(struct snd_card *card, struct snd_kcontrol *kcontrol, bool add_on_replace); int snd_ctl_remove_id(struct snd_card * card, struct snd_ctl_elem_id *id); int snd_ctl_rename_id(struct snd_card * card, struct snd_ctl_elem_id *src_id, struct snd_ctl_elem_id *dst_id); int snd_ctl_activate_id(struct snd_card *card, struct snd_ctl_elem_id *id, diff --git a/include/sound/max98095.h b/include/sound/max98095.h new file mode 100644 index 0000000..7513a42 --- /dev/null +++ b/include/sound/max98095.h @@ -0,0 +1,54 @@ +/* + * Platform data for MAX98095 + * + * Copyright 2011 Maxim Integrated Products + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __SOUND_MAX98095_PDATA_H__ +#define __SOUND_MAX98095_PDATA_H__ + +/* Equalizer filter response configuration */ +struct max98095_eq_cfg { + const char *name; + unsigned int rate; + u16 band1[5]; + u16 band2[5]; + u16 band3[5]; + u16 band4[5]; + u16 band5[5]; +}; + +/* Biquad filter response configuration */ +struct max98095_biquad_cfg { + const char *name; + unsigned int rate; + u16 band1[5]; + u16 band2[5]; +}; + +/* codec platform data */ +struct max98095_pdata { + + /* Equalizers for DAI1 and DAI2 */ + struct max98095_eq_cfg *eq_cfg; + unsigned int eq_cfgcnt; + + /* Biquad filter for DAI1 and DAI2 */ + struct max98095_biquad_cfg *bq_cfg; + unsigned int bq_cfgcnt; + + /* Analog/digital microphone configuration: + * 0 = analog microphone input (normal setting) + * 1 = digital microphone input + */ + unsigned int digmic_left_mode:1; + unsigned int digmic_right_mode:1; +}; + +#endif diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index f72c103..c46e7d8 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -24,7 +24,7 @@ * SoC dynamic audio power management * * We can have up to 4 power domains - * 1. Codec domain - VREF, VMID + * 1. Codec domain - VREF, VMID * Usually controlled at codec probe/remove, although can be set * at stream time if power is not needed for sidetone, etc. * 2. Platform/Machine domain - physically connected inputs and outputs @@ -39,30 +39,30 @@ /* codec domain */ #define SND_SOC_DAPM_VMID(wname) \ -{ .id = snd_soc_dapm_vmid, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_vmid, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0} /* platform domain */ #define SND_SOC_DAPM_INPUT(wname) \ -{ .id = snd_soc_dapm_input, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_input, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM } #define SND_SOC_DAPM_OUTPUT(wname) \ -{ .id = snd_soc_dapm_output, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_output, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM } #define SND_SOC_DAPM_MIC(wname, wevent) \ -{ .id = snd_soc_dapm_mic, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_mic, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \ .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD} #define SND_SOC_DAPM_HP(wname, wevent) \ -{ .id = snd_soc_dapm_hp, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_hp, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \ .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} #define SND_SOC_DAPM_SPK(wname, wevent) \ -{ .id = snd_soc_dapm_spk, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_spk, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \ .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} #define SND_SOC_DAPM_LINE(wname, wevent) \ -{ .id = snd_soc_dapm_line, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_line, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \ .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} @@ -70,91 +70,91 @@ #define SND_SOC_DAPM_PGA(wname, wreg, wshift, winvert,\ wcontrols, wncontrols) \ { .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols} + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_OUT_DRV(wname, wreg, wshift, winvert,\ wcontrols, wncontrols) \ { .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols} + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MIXER(wname, wreg, wshift, winvert, \ wcontrols, wncontrols)\ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols} + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MIXER_NAMED_CTL(wname, wreg, wshift, winvert, \ wcontrols, wncontrols)\ { .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \ - .shift = wshift, .invert = winvert, .kcontrols = wcontrols, \ + .shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \ .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \ { .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = NULL, .num_kcontrols = 0} + .invert = winvert, .kcontrol_news = NULL, .num_kcontrols = 0} #define SND_SOC_DAPM_SWITCH(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1} + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1} + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_VIRT_MUX(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_virt_mux, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1} + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_VALUE_MUX(wname, wreg, wshift, winvert, wcontrols) \ { .id = snd_soc_dapm_value_mux, .name = wname, .reg = wreg, \ - .shift = wshift, .invert = winvert, .kcontrols = wcontrols, \ + .shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \ .num_kcontrols = 1} /* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */ #define SOC_PGA_ARRAY(wname, wreg, wshift, winvert,\ wcontrols) \ { .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} #define SOC_MIXER_ARRAY(wname, wreg, wshift, winvert, \ wcontrols)\ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} #define SOC_MIXER_NAMED_CTL_ARRAY(wname, wreg, wshift, winvert, \ wcontrols)\ { .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \ - .shift = wshift, .invert = winvert, .kcontrols = wcontrols, \ + .shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \ .num_kcontrols = ARRAY_SIZE(wcontrols)} /* path domain with event - event handler must return 0 for success */ #define SND_SOC_DAPM_PGA_E(wname, wreg, wshift, winvert, wcontrols, \ wncontrols, wevent, wflags) \ { .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \ + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_OUT_DRV_E(wname, wreg, wshift, winvert, wcontrols, \ wncontrols, wevent, wflags) \ { .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \ + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MIXER_E(wname, wreg, wshift, winvert, wcontrols, \ wncontrols, wevent, wflags) \ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \ + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MIXER_NAMED_CTL_E(wname, wreg, wshift, winvert, \ wcontrols, wncontrols, wevent, wflags) \ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, \ + .invert = winvert, .kcontrol_news = wcontrols, \ .num_kcontrols = wncontrols, .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MICBIAS_E(wname, wreg, wshift, winvert, wevent, wflags) \ { .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = NULL, .num_kcontrols = 0, \ + .invert = winvert, .kcontrol_news = NULL, .num_kcontrols = 0, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ { .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \ + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ { .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \ + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_VIRT_MUX_E(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ { .id = snd_soc_dapm_virt_mux, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \ + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \ .event = wevent, .event_flags = wflags} /* additional sequencing control within an event type */ @@ -173,26 +173,26 @@ #define SOC_PGA_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ { .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ .event = wevent, .event_flags = wflags} #define SOC_MIXER_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ + .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ .event = wevent, .event_flags = wflags} #define SOC_MIXER_NAMED_CTL_E_ARRAY(wname, wreg, wshift, winvert, \ wcontrols, wevent, wflags) \ { .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, \ + .invert = winvert, .kcontrol_news = wcontrols, \ .num_kcontrols = ARRAY_SIZE(wcontrols), .event = wevent, .event_flags = wflags} /* events that are pre and post DAPM */ #define SND_SOC_DAPM_PRE(wname, wevent) \ -{ .id = snd_soc_dapm_pre, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_pre, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \ .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD} #define SND_SOC_DAPM_POST(wname, wevent) \ -{ .id = snd_soc_dapm_post, .name = wname, .kcontrols = NULL, \ +{ .id = snd_soc_dapm_post, .name = wname, .kcontrol_news = NULL, \ .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \ .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD} @@ -232,7 +232,7 @@ /* generic widgets */ #define SND_SOC_DAPM_REG(wid, wname, wreg, wshift, wmask, won_val, woff_val) \ -{ .id = wid, .name = wname, .kcontrols = NULL, .num_kcontrols = 0, \ +{ .id = wid, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, \ .reg = -((wreg) + 1), .shift = wshift, .mask = wmask, \ .on_val = won_val, .off_val = woff_val, .event = dapm_reg_event, \ .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD} @@ -356,7 +356,8 @@ void snd_soc_dapm_shutdown(struct snd_soc_card *card); /* dapm sys fs - used by the core */ int snd_soc_dapm_sys_add(struct device *dev); -void snd_soc_dapm_debugfs_init(struct snd_soc_dapm_context *dapm); +void snd_soc_dapm_debugfs_init(struct snd_soc_dapm_context *dapm, + struct dentry *parent); /* dapm audio pin control and status */ int snd_soc_dapm_enable_pin(struct snd_soc_dapm_context *dapm, @@ -472,7 +473,8 @@ struct snd_soc_dapm_widget { /* kcontrols that relate to this widget */ int num_kcontrols; - const struct snd_kcontrol_new *kcontrols; + const struct snd_kcontrol_new *kcontrol_news; + struct snd_kcontrol **kcontrols; /* widget input and outputs */ struct list_head sources; @@ -516,4 +518,10 @@ struct snd_soc_dapm_context { #endif }; +/* A list of widgets associated with an object, typically a snd_kcontrol */ +struct snd_soc_dapm_widget_list { + int num_widgets; + struct snd_soc_dapm_widget *widgets[0]; +}; + #endif diff --git a/include/sound/soc.h b/include/sound/soc.h index bfa4836..f1de3e0 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -248,7 +248,7 @@ typedef int (*hw_write_t)(void *,const char* ,int); extern struct snd_ac97_bus_ops soc_ac97_ops; enum snd_soc_control_type { - SND_SOC_CUSTOM, + SND_SOC_CUSTOM = 1, SND_SOC_I2C, SND_SOC_SPI, }; @@ -278,6 +278,10 @@ int snd_soc_register_codec(struct device *dev, void snd_soc_unregister_codec(struct device *dev); int snd_soc_codec_volatile_register(struct snd_soc_codec *codec, unsigned int reg); +int snd_soc_codec_readable_register(struct snd_soc_codec *codec, + unsigned int reg); +int snd_soc_codec_writable_register(struct snd_soc_codec *codec, + unsigned int reg); int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec, int addr_bits, int data_bits, enum snd_soc_control_type control); @@ -292,6 +296,8 @@ int snd_soc_default_volatile_register(struct snd_soc_codec *codec, unsigned int reg); int snd_soc_default_readable_register(struct snd_soc_codec *codec, unsigned int reg); +int snd_soc_default_writable_register(struct snd_soc_codec *codec, + unsigned int reg); /* Utility functions to get clock rates from various things */ int snd_soc_calc_frame_size(int sample_size, int channels, int tdm_slots); @@ -523,6 +529,7 @@ struct snd_soc_codec { size_t reg_size; /* reg_cache_size * reg_word_size */ int (*volatile_register)(struct snd_soc_codec *, unsigned int); int (*readable_register)(struct snd_soc_codec *, unsigned int); + int (*writable_register)(struct snd_soc_codec *, unsigned int); /* runtime */ struct snd_ac97 *ac97; /* for ad-hoc ac97 devices */ @@ -539,10 +546,12 @@ struct snd_soc_codec { /* codec IO */ void *control_data; /* codec control (i2c/3wire) data */ + enum snd_soc_control_type control_type; hw_write_t hw_write; unsigned int (*hw_read)(struct snd_soc_codec *, unsigned int); unsigned int (*read)(struct snd_soc_codec *, unsigned int); int (*write)(struct snd_soc_codec *, unsigned int, unsigned int); + int (*bulk_write_raw)(struct snd_soc_codec *, unsigned int, const void *, size_t); void *reg_cache; const void *reg_def_copy; const struct snd_soc_cache_ops *cache_ops; @@ -568,7 +577,9 @@ struct snd_soc_codec_driver { pm_message_t state); int (*resume)(struct snd_soc_codec *); - /* Default DAPM setup, added after probe() is run */ + /* Default control and setup, added after probe() is run */ + const struct snd_kcontrol_new *controls; + int num_controls; const struct snd_soc_dapm_widget *dapm_widgets; int num_dapm_widgets; const struct snd_soc_dapm_route *dapm_routes; @@ -587,6 +598,7 @@ struct snd_soc_codec_driver { size_t, unsigned int); int (*volatile_register)(struct snd_soc_codec *, unsigned int); int (*readable_register)(struct snd_soc_codec *, unsigned int); + int (*writable_register)(struct snd_soc_codec *, unsigned int); short reg_cache_size; short reg_cache_step; short reg_word_size; @@ -690,6 +702,8 @@ struct snd_soc_aux_dev { /* SoC card */ struct snd_soc_card { const char *name; + const char *long_name; + const char *driver_name; struct device *dev; struct snd_card *snd_card; struct module *owner; @@ -737,12 +751,15 @@ struct snd_soc_card { struct snd_soc_pcm_runtime *rtd_aux; int num_aux_rtd; + const struct snd_kcontrol_new *controls; + int num_controls; + /* * Card-specific routes and widgets. */ - struct snd_soc_dapm_widget *dapm_widgets; + const struct snd_soc_dapm_widget *dapm_widgets; int num_dapm_widgets; - struct snd_soc_dapm_route *dapm_routes; + const struct snd_soc_dapm_route *dapm_routes; int num_dapm_routes; struct work_struct deferred_resume_work; @@ -805,7 +822,7 @@ struct soc_enum { unsigned char shift_r; unsigned int max; unsigned int mask; - const char **texts; + const char * const *texts; const unsigned int *values; void *dapm; }; @@ -814,6 +831,8 @@ struct soc_enum { unsigned int snd_soc_read(struct snd_soc_codec *codec, unsigned int reg); unsigned int snd_soc_write(struct snd_soc_codec *codec, unsigned int reg, unsigned int val); +unsigned int snd_soc_bulk_write_raw(struct snd_soc_codec *codec, + unsigned int reg, const void *data, size_t len); /* device driver data */ @@ -871,6 +890,9 @@ static inline void snd_soc_initialize_card_lists(struct snd_soc_card *card) INIT_LIST_HEAD(&card->dapm_list); } +int snd_soc_util_init(void); +void snd_soc_util_exit(void); + #include <sound/soc-dai.h> #ifdef CONFIG_DEBUG_FS diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h index 5718a02..d2ea112 100644 --- a/include/sound/tea575x-tuner.h +++ b/include/sound/tea575x-tuner.h @@ -26,29 +26,37 @@ #include <media/v4l2-dev.h> #include <media/v4l2-ioctl.h> +#define TEA575X_FMIF 10700 + +#define TEA575X_DATA (1 << 0) +#define TEA575X_CLK (1 << 1) +#define TEA575X_WREN (1 << 2) +#define TEA575X_MOST (1 << 3) + struct snd_tea575x; struct snd_tea575x_ops { - void (*write)(struct snd_tea575x *tea, unsigned int val); - unsigned int (*read)(struct snd_tea575x *tea); - void (*mute)(struct snd_tea575x *tea, unsigned int mute); + void (*set_pins)(struct snd_tea575x *tea, u8 pins); + u8 (*get_pins)(struct snd_tea575x *tea); + void (*set_direction)(struct snd_tea575x *tea, bool output); }; struct snd_tea575x { - struct snd_card *card; struct video_device *vd; /* video device */ - int dev_nr; /* requested device number + 1 */ - int tea5759; /* 5759 chip is present */ - int mute; /* Device is muted? */ - unsigned int freq_fixup; /* crystal onboard */ + bool tea5759; /* 5759 chip is present */ + bool mute; /* Device is muted? */ + bool stereo; /* receiving stereo */ + bool tuned; /* tuned to a station */ unsigned int val; /* hw value */ unsigned long freq; /* frequency */ unsigned long in_use; /* set if the device is in use */ struct snd_tea575x_ops *ops; void *private_data; + u8 card[32]; + u8 bus_info[32]; }; -void snd_tea575x_init(struct snd_tea575x *tea); +int snd_tea575x_init(struct snd_tea575x *tea); void snd_tea575x_exit(struct snd_tea575x *tea); #endif /* __SOUND_TEA575X_TUNER_H */ diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h index 6c66496..0b94192 100644 --- a/include/sound/tlv320dac33-plat.h +++ b/include/sound/tlv320dac33-plat.h @@ -1,7 +1,7 @@ /* * Platform header for Texas Instruments TLV320DAC33 codec driver * - * Author: Peter Ujfalusi <peter.ujfalusi@nokia.com> + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> * * Copyright: (C) 2009 Nokia Corporation * diff --git a/include/sound/tpa6130a2-plat.h b/include/sound/tpa6130a2-plat.h index e29fde6..89beccb 100644 --- a/include/sound/tpa6130a2-plat.h +++ b/include/sound/tpa6130a2-plat.h @@ -3,7 +3,7 @@ * * Copyright (C) Nokia Corporation * - * Written by Peter Ujfalusi <peter.ujfalusi@nokia.com> + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/include/sound/wm8915.h b/include/sound/wm8915.h new file mode 100644 index 0000000..5817d76 --- /dev/null +++ b/include/sound/wm8915.h @@ -0,0 +1,55 @@ +/* + * linux/sound/wm8915.h -- Platform data for WM8915 + * + * Copyright 2011 Wolfson Microelectronics. PLC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_SND_WM8903_H +#define __LINUX_SND_WM8903_H + +enum wm8915_inmode { + WM8915_DIFFERRENTIAL_1 = 0, /* IN1xP - IN1xN */ + WM8915_INVERTING = 1, /* IN1xN */ + WM8915_NON_INVERTING = 2, /* IN1xP */ + WM8915_DIFFERENTIAL_2 = 3, /* IN2xP - IN2xP */ +}; + +/** + * ReTune Mobile configurations are specified with a label, sample + * rate and set of values to write (the enable bits will be ignored). + * + * Configurations are expected to be generated using the ReTune Mobile + * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/ + */ +struct wm8915_retune_mobile_config { + const char *name; + int rate; + u16 regs[20]; +}; + +#define WM8915_SET_DEFAULT 0x10000 + +struct wm8915_pdata { + int irq_flags; /** Set IRQ trigger flags; default active low */ + + int ldo_ena; /** GPIO for LDO1; -1 for none */ + + int micdet_def; /** Default MICDET_SRC/HP1FB_SRC/MICD_BIAS */ + + enum wm8915_inmode inl_mode; + enum wm8915_inmode inr_mode; + + u32 spkmute_seq; /** Value for register 0x802 */ + + int gpio_base; + u32 gpio_default[5]; + + int num_retune_mobile_cfgs; + struct wm8915_retune_mobile_config *retune_mobile_cfgs; +}; + +#endif diff --git a/include/sound/wm8962.h b/include/sound/wm8962.h index 2b5306c..1750bed 100644 --- a/include/sound/wm8962.h +++ b/include/sound/wm8962.h @@ -14,6 +14,28 @@ /* Use to set GPIO default values to zero */ #define WM8962_GPIO_SET 0x10000 +#define WM8962_GPIO_FN_CLKOUT 0 +#define WM8962_GPIO_FN_LOGIC 1 +#define WM8962_GPIO_FN_SDOUT 2 +#define WM8962_GPIO_FN_IRQ 3 +#define WM8962_GPIO_FN_THERMAL 4 +#define WM8962_GPIO_FN_PLL2_LOCK 6 +#define WM8962_GPIO_FN_PLL3_LOCK 7 +#define WM8962_GPIO_FN_FLL_LOCK 9 +#define WM8962_GPIO_FN_DRC_ACT 10 +#define WM8962_GPIO_FN_WSEQ_DONE 11 +#define WM8962_GPIO_FN_ALC_NG_ACT 12 +#define WM8962_GPIO_FN_ALC_PEAK_LIMIT 13 +#define WM8962_GPIO_FN_ALC_SATURATION 14 +#define WM8962_GPIO_FN_ALC_LEVEL_THR 15 +#define WM8962_GPIO_FN_ALC_LEVEL_LOCK 16 +#define WM8962_GPIO_FN_FIFO_ERR 17 +#define WM8962_GPIO_FN_OPCLK 18 +#define WM8962_GPIO_FN_DMICCLK 19 +#define WM8962_GPIO_FN_DMICDAT 20 +#define WM8962_GPIO_FN_MICD 21 +#define WM8962_GPIO_FN_MICSCD 22 + struct wm8962_pdata { int gpio_base; u32 gpio_init[WM8962_MAX_GPIO]; diff --git a/include/video/newport.h b/include/video/newport.h index 3d7c4b4..de980a3 100644 --- a/include/video/newport.h +++ b/include/video/newport.h @@ -3,7 +3,7 @@ * newport.h: Defines and register layout for NEWPORT graphics * hardware. * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) * * Ulf Carlsson - Compatibility with the IRIX structures added */ |