diff options
Diffstat (limited to 'kernel')
39 files changed, 8686 insertions, 1901 deletions
diff --git a/kernel/Makefile b/kernel/Makefile index 149e18e..057472f 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -75,7 +75,7 @@ obj-$(CONFIG_AUDITSYSCALL) += auditsc.o obj-$(CONFIG_GCOV_KERNEL) += gcov/ obj-$(CONFIG_AUDIT_TREE) += audit_tree.o obj-$(CONFIG_KPROBES) += kprobes.o -obj-$(CONFIG_KGDB) += kgdb.o +obj-$(CONFIG_KGDB) += debug/ obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o obj-$(CONFIG_GENERIC_HARDIRQS) += irq/ diff --git a/kernel/cpu.c b/kernel/cpu.c index 5457775..124ad9d 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -326,6 +326,12 @@ out_notify: int __cpuinit cpu_up(unsigned int cpu) { int err = 0; + +#ifdef CONFIG_MEMORY_HOTPLUG + int nid; + pg_data_t *pgdat; +#endif + if (!cpu_possible(cpu)) { printk(KERN_ERR "can't online cpu %d because it is not " "configured as may-hotadd at boot time\n", cpu); @@ -336,6 +342,28 @@ int __cpuinit cpu_up(unsigned int cpu) return -EINVAL; } +#ifdef CONFIG_MEMORY_HOTPLUG + nid = cpu_to_node(cpu); + if (!node_online(nid)) { + err = mem_online_node(nid); + if (err) + return err; + } + + pgdat = NODE_DATA(nid); + if (!pgdat) { + printk(KERN_ERR + "Can't online cpu %d due to NULL pgdat\n", cpu); + return -ENOMEM; + } + + if (pgdat->node_zonelists->_zonerefs->zone == NULL) { + mutex_lock(&zonelists_mutex); + build_all_zonelists(NULL); + mutex_unlock(&zonelists_mutex); + } +#endif + cpu_maps_update_begin(); if (cpu_hotplug_disabled) { diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 9a50c5f..61d6af7 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -946,16 +946,62 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from, * In order to avoid seeing no nodes if the old and new nodes are disjoint, * we structure updates as setting all new allowed nodes, then clearing newly * disallowed ones. - * - * Called with task's alloc_lock held */ static void cpuset_change_task_nodemask(struct task_struct *tsk, nodemask_t *newmems) { +repeat: + /* + * Allow tasks that have access to memory reserves because they have + * been OOM killed to get memory anywhere. + */ + if (unlikely(test_thread_flag(TIF_MEMDIE))) + return; + if (current->flags & PF_EXITING) /* Let dying task have memory */ + return; + + task_lock(tsk); nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems); - mpol_rebind_task(tsk, &tsk->mems_allowed); - mpol_rebind_task(tsk, newmems); + mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1); + + + /* + * ensure checking ->mems_allowed_change_disable after setting all new + * allowed nodes. + * + * the read-side task can see an nodemask with new allowed nodes and + * old allowed nodes. and if it allocates page when cpuset clears newly + * disallowed ones continuous, it can see the new allowed bits. + * + * And if setting all new allowed nodes is after the checking, setting + * all new allowed nodes and clearing newly disallowed ones will be done + * continuous, and the read-side task may find no node to alloc page. + */ + smp_mb(); + + /* + * Allocation of memory is very fast, we needn't sleep when waiting + * for the read-side. + */ + while (ACCESS_ONCE(tsk->mems_allowed_change_disable)) { + task_unlock(tsk); + if (!task_curr(tsk)) + yield(); + goto repeat; + } + + /* + * ensure checking ->mems_allowed_change_disable before clearing all new + * disallowed nodes. + * + * if clearing newly disallowed bits before the checking, the read-side + * task may find no node to alloc page. + */ + smp_mb(); + + mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP2); tsk->mems_allowed = *newmems; + task_unlock(tsk); } /* @@ -978,9 +1024,7 @@ static void cpuset_change_nodemask(struct task_struct *p, cs = cgroup_cs(scan->cg); guarantee_online_mems(cs, newmems); - task_lock(p); cpuset_change_task_nodemask(p, newmems); - task_unlock(p); NODEMASK_FREE(newmems); @@ -1383,9 +1427,7 @@ static void cpuset_attach_task(struct task_struct *tsk, nodemask_t *to, err = set_cpus_allowed_ptr(tsk, cpus_attach); WARN_ON_ONCE(err); - task_lock(tsk); cpuset_change_task_nodemask(tsk, to); - task_unlock(tsk); cpuset_update_task_spread_flag(cs, tsk); } diff --git a/kernel/debug/Makefile b/kernel/debug/Makefile new file mode 100644 index 0000000..a85edc3 --- /dev/null +++ b/kernel/debug/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel debugger +# + +obj-$(CONFIG_KGDB) += debug_core.o gdbstub.o +obj-$(CONFIG_KGDB_KDB) += kdb/ diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c new file mode 100644 index 0000000..5cb7cd1 --- /dev/null +++ b/kernel/debug/debug_core.c @@ -0,0 +1,983 @@ +/* + * Kernel Debug Core + * + * Maintainer: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (C) 2000-2001 VERITAS Software Corporation. + * Copyright (C) 2002-2004 Timesys Corporation + * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> + * Copyright (C) 2004 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> + * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. + * Copyright (C) 2005-2009 Wind River Systems, Inc. + * Copyright (C) 2007 MontaVista Software, Inc. + * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> + * + * Contributors at various stages not listed above: + * Jason Wessel ( jason.wessel@windriver.com ) + * George Anzinger <george@mvista.com> + * Anurekh Saxena (anurekh.saxena@timesys.com) + * Lake Stevens Instrument Division (Glenn Engel) + * Jim Kingdon, Cygnus Support. + * + * Original KGDB stub: David Grothe <dave@gcom.com>, + * Tigran Aivazian <tigran@sco.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#include <linux/pid_namespace.h> +#include <linux/clocksource.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/console.h> +#include <linux/threads.h> +#include <linux/uaccess.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ptrace.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/sysrq.h> +#include <linux/init.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/pid.h> +#include <linux/smp.h> +#include <linux/mm.h> + +#include <asm/cacheflush.h> +#include <asm/byteorder.h> +#include <asm/atomic.h> +#include <asm/system.h> + +#include "debug_core.h" + +static int kgdb_break_asap; + +struct debuggerinfo_struct kgdb_info[NR_CPUS]; + +/** + * kgdb_connected - Is a host GDB connected to us? + */ +int kgdb_connected; +EXPORT_SYMBOL_GPL(kgdb_connected); + +/* All the KGDB handlers are installed */ +int kgdb_io_module_registered; + +/* Guard for recursive entry */ +static int exception_level; + +struct kgdb_io *dbg_io_ops; +static DEFINE_SPINLOCK(kgdb_registration_lock); + +/* kgdb console driver is loaded */ +static int kgdb_con_registered; +/* determine if kgdb console output should be used */ +static int kgdb_use_con; +/* Flag for alternate operations for early debugging */ +bool dbg_is_early = true; +/* Next cpu to become the master debug core */ +int dbg_switch_cpu; + +/* Use kdb or gdbserver mode */ +int dbg_kdb_mode = 1; + +static int __init opt_kgdb_con(char *str) +{ + kgdb_use_con = 1; + return 0; +} + +early_param("kgdbcon", opt_kgdb_con); + +module_param(kgdb_use_con, int, 0644); + +/* + * Holds information about breakpoints in a kernel. These breakpoints are + * added and removed by gdb. + */ +static struct kgdb_bkpt kgdb_break[KGDB_MAX_BREAKPOINTS] = { + [0 ... KGDB_MAX_BREAKPOINTS-1] = { .state = BP_UNDEFINED } +}; + +/* + * The CPU# of the active CPU, or -1 if none: + */ +atomic_t kgdb_active = ATOMIC_INIT(-1); +EXPORT_SYMBOL_GPL(kgdb_active); + +/* + * We use NR_CPUs not PERCPU, in case kgdb is used to debug early + * bootup code (which might not have percpu set up yet): + */ +static atomic_t passive_cpu_wait[NR_CPUS]; +static atomic_t cpu_in_kgdb[NR_CPUS]; +static atomic_t kgdb_break_tasklet_var; +atomic_t kgdb_setting_breakpoint; + +struct task_struct *kgdb_usethread; +struct task_struct *kgdb_contthread; + +int kgdb_single_step; +static pid_t kgdb_sstep_pid; + +/* to keep track of the CPU which is doing the single stepping*/ +atomic_t kgdb_cpu_doing_single_step = ATOMIC_INIT(-1); + +/* + * If you are debugging a problem where roundup (the collection of + * all other CPUs) is a problem [this should be extremely rare], + * then use the nokgdbroundup option to avoid roundup. In that case + * the other CPUs might interfere with your debugging context, so + * use this with care: + */ +static int kgdb_do_roundup = 1; + +static int __init opt_nokgdbroundup(char *str) +{ + kgdb_do_roundup = 0; + + return 0; +} + +early_param("nokgdbroundup", opt_nokgdbroundup); + +/* + * Finally, some KGDB code :-) + */ + +/* + * Weak aliases for breakpoint management, + * can be overriden by architectures when needed: + */ +int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) +{ + int err; + + err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE); + if (err) + return err; + + return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr, + BREAK_INSTR_SIZE); +} + +int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) +{ + return probe_kernel_write((char *)addr, + (char *)bundle, BREAK_INSTR_SIZE); +} + +int __weak kgdb_validate_break_address(unsigned long addr) +{ + char tmp_variable[BREAK_INSTR_SIZE]; + int err; + /* Validate setting the breakpoint and then removing it. In the + * remove fails, the kernel needs to emit a bad message because we + * are deep trouble not being able to put things back the way we + * found them. + */ + err = kgdb_arch_set_breakpoint(addr, tmp_variable); + if (err) + return err; + err = kgdb_arch_remove_breakpoint(addr, tmp_variable); + if (err) + printk(KERN_ERR "KGDB: Critical breakpoint error, kernel " + "memory destroyed at: %lx", addr); + return err; +} + +unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs) +{ + return instruction_pointer(regs); +} + +int __weak kgdb_arch_init(void) +{ + return 0; +} + +int __weak kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return 0; +} + +/** + * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb. + * @regs: Current &struct pt_regs. + * + * This function will be called if the particular architecture must + * disable hardware debugging while it is processing gdb packets or + * handling exception. + */ +void __weak kgdb_disable_hw_debug(struct pt_regs *regs) +{ +} + +/* + * Some architectures need cache flushes when we set/clear a + * breakpoint: + */ +static void kgdb_flush_swbreak_addr(unsigned long addr) +{ + if (!CACHE_FLUSH_IS_SAFE) + return; + + if (current->mm && current->mm->mmap_cache) { + flush_cache_range(current->mm->mmap_cache, + addr, addr + BREAK_INSTR_SIZE); + } + /* Force flush instruction cache if it was outside the mm */ + flush_icache_range(addr, addr + BREAK_INSTR_SIZE); +} + +/* + * SW breakpoint management: + */ +int dbg_activate_sw_breakpoints(void) +{ + unsigned long addr; + int error; + int ret = 0; + int i; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != BP_SET) + continue; + + addr = kgdb_break[i].bpt_addr; + error = kgdb_arch_set_breakpoint(addr, + kgdb_break[i].saved_instr); + if (error) { + ret = error; + printk(KERN_INFO "KGDB: BP install failed: %lx", addr); + continue; + } + + kgdb_flush_swbreak_addr(addr); + kgdb_break[i].state = BP_ACTIVE; + } + return ret; +} + +int dbg_set_sw_break(unsigned long addr) +{ + int err = kgdb_validate_break_address(addr); + int breakno = -1; + int i; + + if (err) + return err; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == BP_SET) && + (kgdb_break[i].bpt_addr == addr)) + return -EEXIST; + } + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state == BP_REMOVED && + kgdb_break[i].bpt_addr == addr) { + breakno = i; + break; + } + } + + if (breakno == -1) { + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state == BP_UNDEFINED) { + breakno = i; + break; + } + } + } + + if (breakno == -1) + return -E2BIG; + + kgdb_break[breakno].state = BP_SET; + kgdb_break[breakno].type = BP_BREAKPOINT; + kgdb_break[breakno].bpt_addr = addr; + + return 0; +} + +int dbg_deactivate_sw_breakpoints(void) +{ + unsigned long addr; + int error; + int ret = 0; + int i; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != BP_ACTIVE) + continue; + addr = kgdb_break[i].bpt_addr; + error = kgdb_arch_remove_breakpoint(addr, + kgdb_break[i].saved_instr); + if (error) { + printk(KERN_INFO "KGDB: BP remove failed: %lx\n", addr); + ret = error; + } + + kgdb_flush_swbreak_addr(addr); + kgdb_break[i].state = BP_SET; + } + return ret; +} + +int dbg_remove_sw_break(unsigned long addr) +{ + int i; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == BP_SET) && + (kgdb_break[i].bpt_addr == addr)) { + kgdb_break[i].state = BP_REMOVED; + return 0; + } + } + return -ENOENT; +} + +int kgdb_isremovedbreak(unsigned long addr) +{ + int i; + + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if ((kgdb_break[i].state == BP_REMOVED) && + (kgdb_break[i].bpt_addr == addr)) + return 1; + } + return 0; +} + +int dbg_remove_all_break(void) +{ + unsigned long addr; + int error; + int i; + + /* Clear memory breakpoints. */ + for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { + if (kgdb_break[i].state != BP_ACTIVE) + goto setundefined; + addr = kgdb_break[i].bpt_addr; + error = kgdb_arch_remove_breakpoint(addr, + kgdb_break[i].saved_instr); + if (error) + printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n", + addr); +setundefined: + kgdb_break[i].state = BP_UNDEFINED; + } + + /* Clear hardware breakpoints. */ + if (arch_kgdb_ops.remove_all_hw_break) + arch_kgdb_ops.remove_all_hw_break(); + + return 0; +} + +/* + * Return true if there is a valid kgdb I/O module. Also if no + * debugger is attached a message can be printed to the console about + * waiting for the debugger to attach. + * + * The print_wait argument is only to be true when called from inside + * the core kgdb_handle_exception, because it will wait for the + * debugger to attach. + */ +static int kgdb_io_ready(int print_wait) +{ + if (!dbg_io_ops) + return 0; + if (kgdb_connected) + return 1; + if (atomic_read(&kgdb_setting_breakpoint)) + return 1; + if (print_wait) { +#ifdef CONFIG_KGDB_KDB + if (!dbg_kdb_mode) + printk(KERN_CRIT "KGDB: waiting... or $3#33 for KDB\n"); +#else + printk(KERN_CRIT "KGDB: Waiting for remote debugger\n"); +#endif + } + return 1; +} + +static int kgdb_reenter_check(struct kgdb_state *ks) +{ + unsigned long addr; + + if (atomic_read(&kgdb_active) != raw_smp_processor_id()) + return 0; + + /* Panic on recursive debugger calls: */ + exception_level++; + addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs); + dbg_deactivate_sw_breakpoints(); + + /* + * If the break point removed ok at the place exception + * occurred, try to recover and print a warning to the end + * user because the user planted a breakpoint in a place that + * KGDB needs in order to function. + */ + if (dbg_remove_sw_break(addr) == 0) { + exception_level = 0; + kgdb_skipexception(ks->ex_vector, ks->linux_regs); + dbg_activate_sw_breakpoints(); + printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n", + addr); + WARN_ON_ONCE(1); + + return 1; + } + dbg_remove_all_break(); + kgdb_skipexception(ks->ex_vector, ks->linux_regs); + + if (exception_level > 1) { + dump_stack(); + panic("Recursive entry to debugger"); + } + + printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n"); +#ifdef CONFIG_KGDB_KDB + /* Allow kdb to debug itself one level */ + return 0; +#endif + dump_stack(); + panic("Recursive entry to debugger"); + + return 1; +} + +static void dbg_cpu_switch(int cpu, int next_cpu) +{ + /* Mark the cpu we are switching away from as a slave when it + * holds the kgdb_active token. This must be done so that the + * that all the cpus wait in for the debug core will not enter + * again as the master. */ + if (cpu == atomic_read(&kgdb_active)) { + kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE; + kgdb_info[cpu].exception_state &= ~DCPU_WANT_MASTER; + } + kgdb_info[next_cpu].exception_state |= DCPU_NEXT_MASTER; +} + +static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs) +{ + unsigned long flags; + int sstep_tries = 100; + int error; + int i, cpu; + int trace_on = 0; +acquirelock: + /* + * Interrupts will be restored by the 'trap return' code, except when + * single stepping. + */ + local_irq_save(flags); + + cpu = ks->cpu; + kgdb_info[cpu].debuggerinfo = regs; + kgdb_info[cpu].task = current; + kgdb_info[cpu].ret_state = 0; + kgdb_info[cpu].irq_depth = hardirq_count() >> HARDIRQ_SHIFT; + /* + * Make sure the above info reaches the primary CPU before + * our cpu_in_kgdb[] flag setting does: + */ + atomic_inc(&cpu_in_kgdb[cpu]); + + if (exception_level == 1) + goto cpu_master_loop; + + /* + * CPU will loop if it is a slave or request to become a kgdb + * master cpu and acquire the kgdb_active lock: + */ + while (1) { +cpu_loop: + if (kgdb_info[cpu].exception_state & DCPU_NEXT_MASTER) { + kgdb_info[cpu].exception_state &= ~DCPU_NEXT_MASTER; + goto cpu_master_loop; + } else if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) { + if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu) + break; + } else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) { + if (!atomic_read(&passive_cpu_wait[cpu])) + goto return_normal; + } else { +return_normal: + /* Return to normal operation by executing any + * hw breakpoint fixup. + */ + if (arch_kgdb_ops.correct_hw_break) + arch_kgdb_ops.correct_hw_break(); + if (trace_on) + tracing_on(); + atomic_dec(&cpu_in_kgdb[cpu]); + touch_softlockup_watchdog_sync(); + clocksource_touch_watchdog(); + local_irq_restore(flags); + return 0; + } + cpu_relax(); + } + + /* + * For single stepping, try to only enter on the processor + * that was single stepping. To gaurd against a deadlock, the + * kernel will only try for the value of sstep_tries before + * giving up and continuing on. + */ + if (atomic_read(&kgdb_cpu_doing_single_step) != -1 && + (kgdb_info[cpu].task && + kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) { + atomic_set(&kgdb_active, -1); + touch_softlockup_watchdog_sync(); + clocksource_touch_watchdog(); + local_irq_restore(flags); + + goto acquirelock; + } + + if (!kgdb_io_ready(1)) { + kgdb_info[cpu].ret_state = 1; + goto kgdb_restore; /* No I/O connection, resume the system */ + } + + /* + * Don't enter if we have hit a removed breakpoint. + */ + if (kgdb_skipexception(ks->ex_vector, ks->linux_regs)) + goto kgdb_restore; + + /* Call the I/O driver's pre_exception routine */ + if (dbg_io_ops->pre_exception) + dbg_io_ops->pre_exception(); + + kgdb_disable_hw_debug(ks->linux_regs); + + /* + * Get the passive CPU lock which will hold all the non-primary + * CPU in a spin state while the debugger is active + */ + if (!kgdb_single_step) { + for (i = 0; i < NR_CPUS; i++) + atomic_inc(&passive_cpu_wait[i]); + } + +#ifdef CONFIG_SMP + /* Signal the other CPUs to enter kgdb_wait() */ + if ((!kgdb_single_step) && kgdb_do_roundup) + kgdb_roundup_cpus(flags); +#endif + + /* + * Wait for the other CPUs to be notified and be waiting for us: + */ + for_each_online_cpu(i) { + while (kgdb_do_roundup && !atomic_read(&cpu_in_kgdb[i])) + cpu_relax(); + } + + /* + * At this point the primary processor is completely + * in the debugger and all secondary CPUs are quiescent + */ + dbg_deactivate_sw_breakpoints(); + kgdb_single_step = 0; + kgdb_contthread = current; + exception_level = 0; + trace_on = tracing_is_on(); + if (trace_on) + tracing_off(); + + while (1) { +cpu_master_loop: + if (dbg_kdb_mode) { + kgdb_connected = 1; + error = kdb_stub(ks); + } else { + error = gdb_serial_stub(ks); + } + + if (error == DBG_PASS_EVENT) { + dbg_kdb_mode = !dbg_kdb_mode; + kgdb_connected = 0; + } else if (error == DBG_SWITCH_CPU_EVENT) { + dbg_cpu_switch(cpu, dbg_switch_cpu); + goto cpu_loop; + } else { + kgdb_info[cpu].ret_state = error; + break; + } + } + + /* Call the I/O driver's post_exception routine */ + if (dbg_io_ops->post_exception) + dbg_io_ops->post_exception(); + + atomic_dec(&cpu_in_kgdb[ks->cpu]); + + if (!kgdb_single_step) { + for (i = NR_CPUS-1; i >= 0; i--) + atomic_dec(&passive_cpu_wait[i]); + /* + * Wait till all the CPUs have quit from the debugger, + * but allow a CPU that hit an exception and is + * waiting to become the master to remain in the debug + * core. + */ + for_each_online_cpu(i) { + while (kgdb_do_roundup && + atomic_read(&cpu_in_kgdb[i]) && + !(kgdb_info[i].exception_state & + DCPU_WANT_MASTER)) + cpu_relax(); + } + } + +kgdb_restore: + if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { + int sstep_cpu = atomic_read(&kgdb_cpu_doing_single_step); + if (kgdb_info[sstep_cpu].task) + kgdb_sstep_pid = kgdb_info[sstep_cpu].task->pid; + else + kgdb_sstep_pid = 0; + } + if (trace_on) + tracing_on(); + /* Free kgdb_active */ + atomic_set(&kgdb_active, -1); + touch_softlockup_watchdog_sync(); + clocksource_touch_watchdog(); + local_irq_restore(flags); + + return kgdb_info[cpu].ret_state; +} + +/* + * kgdb_handle_exception() - main entry point from a kernel exception + * + * Locking hierarchy: + * interface locks, if any (begin_session) + * kgdb lock (kgdb_active) + */ +int +kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs) +{ + struct kgdb_state kgdb_var; + struct kgdb_state *ks = &kgdb_var; + int ret; + + ks->cpu = raw_smp_processor_id(); + ks->ex_vector = evector; + ks->signo = signo; + ks->err_code = ecode; + ks->kgdb_usethreadid = 0; + ks->linux_regs = regs; + + if (kgdb_reenter_check(ks)) + return 0; /* Ouch, double exception ! */ + kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER; + ret = kgdb_cpu_enter(ks, regs); + kgdb_info[ks->cpu].exception_state &= ~(DCPU_WANT_MASTER | + DCPU_IS_SLAVE); + return ret; +} + +int kgdb_nmicallback(int cpu, void *regs) +{ +#ifdef CONFIG_SMP + struct kgdb_state kgdb_var; + struct kgdb_state *ks = &kgdb_var; + + memset(ks, 0, sizeof(struct kgdb_state)); + ks->cpu = cpu; + ks->linux_regs = regs; + + if (!atomic_read(&cpu_in_kgdb[cpu]) && + atomic_read(&kgdb_active) != -1 && + atomic_read(&kgdb_active) != cpu) { + kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE; + kgdb_cpu_enter(ks, regs); + kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE; + return 0; + } +#endif + return 1; +} + +static void kgdb_console_write(struct console *co, const char *s, + unsigned count) +{ + unsigned long flags; + + /* If we're debugging, or KGDB has not connected, don't try + * and print. */ + if (!kgdb_connected || atomic_read(&kgdb_active) != -1 || dbg_kdb_mode) + return; + + local_irq_save(flags); + gdbstub_msg_write(s, count); + local_irq_restore(flags); +} + +static struct console kgdbcons = { + .name = "kgdb", + .write = kgdb_console_write, + .flags = CON_PRINTBUFFER | CON_ENABLED, + .index = -1, +}; + +#ifdef CONFIG_MAGIC_SYSRQ +static void sysrq_handle_dbg(int key, struct tty_struct *tty) +{ + if (!dbg_io_ops) { + printk(KERN_CRIT "ERROR: No KGDB I/O module available\n"); + return; + } + if (!kgdb_connected) { +#ifdef CONFIG_KGDB_KDB + if (!dbg_kdb_mode) + printk(KERN_CRIT "KGDB or $3#33 for KDB\n"); +#else + printk(KERN_CRIT "Entering KGDB\n"); +#endif + } + + kgdb_breakpoint(); +} + +static struct sysrq_key_op sysrq_dbg_op = { + .handler = sysrq_handle_dbg, + .help_msg = "debug(G)", + .action_msg = "DEBUG", +}; +#endif + +static int kgdb_panic_event(struct notifier_block *self, + unsigned long val, + void *data) +{ + if (dbg_kdb_mode) + kdb_printf("PANIC: %s\n", (char *)data); + kgdb_breakpoint(); + return NOTIFY_DONE; +} + +static struct notifier_block kgdb_panic_event_nb = { + .notifier_call = kgdb_panic_event, + .priority = INT_MAX, +}; + +void __weak kgdb_arch_late(void) +{ +} + +void __init dbg_late_init(void) +{ + dbg_is_early = false; + if (kgdb_io_module_registered) + kgdb_arch_late(); + kdb_init(KDB_INIT_FULL); +} + +static void kgdb_register_callbacks(void) +{ + if (!kgdb_io_module_registered) { + kgdb_io_module_registered = 1; + kgdb_arch_init(); + if (!dbg_is_early) + kgdb_arch_late(); + atomic_notifier_chain_register(&panic_notifier_list, + &kgdb_panic_event_nb); +#ifdef CONFIG_MAGIC_SYSRQ + register_sysrq_key('g', &sysrq_dbg_op); +#endif + if (kgdb_use_con && !kgdb_con_registered) { + register_console(&kgdbcons); + kgdb_con_registered = 1; + } + } +} + +static void kgdb_unregister_callbacks(void) +{ + /* + * When this routine is called KGDB should unregister from the + * panic handler and clean up, making sure it is not handling any + * break exceptions at the time. + */ + if (kgdb_io_module_registered) { + kgdb_io_module_registered = 0; + atomic_notifier_chain_unregister(&panic_notifier_list, + &kgdb_panic_event_nb); + kgdb_arch_exit(); +#ifdef CONFIG_MAGIC_SYSRQ + unregister_sysrq_key('g', &sysrq_dbg_op); +#endif + if (kgdb_con_registered) { + unregister_console(&kgdbcons); + kgdb_con_registered = 0; + } + } +} + +/* + * There are times a tasklet needs to be used vs a compiled in + * break point so as to cause an exception outside a kgdb I/O module, + * such as is the case with kgdboe, where calling a breakpoint in the + * I/O driver itself would be fatal. + */ +static void kgdb_tasklet_bpt(unsigned long ing) +{ + kgdb_breakpoint(); + atomic_set(&kgdb_break_tasklet_var, 0); +} + +static DECLARE_TASKLET(kgdb_tasklet_breakpoint, kgdb_tasklet_bpt, 0); + +void kgdb_schedule_breakpoint(void) +{ + if (atomic_read(&kgdb_break_tasklet_var) || + atomic_read(&kgdb_active) != -1 || + atomic_read(&kgdb_setting_breakpoint)) + return; + atomic_inc(&kgdb_break_tasklet_var); + tasklet_schedule(&kgdb_tasklet_breakpoint); +} +EXPORT_SYMBOL_GPL(kgdb_schedule_breakpoint); + +static void kgdb_initial_breakpoint(void) +{ + kgdb_break_asap = 0; + + printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n"); + kgdb_breakpoint(); +} + +/** + * kgdb_register_io_module - register KGDB IO module + * @new_dbg_io_ops: the io ops vector + * + * Register it with the KGDB core. + */ +int kgdb_register_io_module(struct kgdb_io *new_dbg_io_ops) +{ + int err; + + spin_lock(&kgdb_registration_lock); + + if (dbg_io_ops) { + spin_unlock(&kgdb_registration_lock); + + printk(KERN_ERR "kgdb: Another I/O driver is already " + "registered with KGDB.\n"); + return -EBUSY; + } + + if (new_dbg_io_ops->init) { + err = new_dbg_io_ops->init(); + if (err) { + spin_unlock(&kgdb_registration_lock); + return err; + } + } + + dbg_io_ops = new_dbg_io_ops; + + spin_unlock(&kgdb_registration_lock); + + printk(KERN_INFO "kgdb: Registered I/O driver %s.\n", + new_dbg_io_ops->name); + + /* Arm KGDB now. */ + kgdb_register_callbacks(); + + if (kgdb_break_asap) + kgdb_initial_breakpoint(); + + return 0; +} +EXPORT_SYMBOL_GPL(kgdb_register_io_module); + +/** + * kkgdb_unregister_io_module - unregister KGDB IO module + * @old_dbg_io_ops: the io ops vector + * + * Unregister it with the KGDB core. + */ +void kgdb_unregister_io_module(struct kgdb_io *old_dbg_io_ops) +{ + BUG_ON(kgdb_connected); + + /* + * KGDB is no longer able to communicate out, so + * unregister our callbacks and reset state. + */ + kgdb_unregister_callbacks(); + + spin_lock(&kgdb_registration_lock); + + WARN_ON_ONCE(dbg_io_ops != old_dbg_io_ops); + dbg_io_ops = NULL; + + spin_unlock(&kgdb_registration_lock); + + printk(KERN_INFO + "kgdb: Unregistered I/O driver %s, debugger disabled.\n", + old_dbg_io_ops->name); +} +EXPORT_SYMBOL_GPL(kgdb_unregister_io_module); + +int dbg_io_get_char(void) +{ + int ret = dbg_io_ops->read_char(); + if (ret == NO_POLL_CHAR) + return -1; + if (!dbg_kdb_mode) + return ret; + if (ret == 127) + return 8; + return ret; +} + +/** + * kgdb_breakpoint - generate breakpoint exception + * + * This function will generate a breakpoint exception. It is used at the + * beginning of a program to sync up with a debugger and can be used + * otherwise as a quick means to stop program execution and "break" into + * the debugger. + */ +void kgdb_breakpoint(void) +{ + atomic_inc(&kgdb_setting_breakpoint); + wmb(); /* Sync point before breakpoint */ + arch_kgdb_breakpoint(); + wmb(); /* Sync point after breakpoint */ + atomic_dec(&kgdb_setting_breakpoint); +} +EXPORT_SYMBOL_GPL(kgdb_breakpoint); + +static int __init opt_kgdb_wait(char *str) +{ + kgdb_break_asap = 1; + + kdb_init(KDB_INIT_EARLY); + if (kgdb_io_module_registered) + kgdb_initial_breakpoint(); + + return 0; +} + +early_param("kgdbwait", opt_kgdb_wait); diff --git a/kernel/debug/debug_core.h b/kernel/debug/debug_core.h new file mode 100644 index 0000000..c5d753d --- /dev/null +++ b/kernel/debug/debug_core.h @@ -0,0 +1,81 @@ +/* + * Created by: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _DEBUG_CORE_H_ +#define _DEBUG_CORE_H_ +/* + * These are the private implementation headers between the kernel + * debugger core and the debugger front end code. + */ + +/* kernel debug core data structures */ +struct kgdb_state { + int ex_vector; + int signo; + int err_code; + int cpu; + int pass_exception; + unsigned long thr_query; + unsigned long threadid; + long kgdb_usethreadid; + struct pt_regs *linux_regs; +}; + +/* Exception state values */ +#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */ +#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */ +#define DCPU_IS_SLAVE 0x4 /* Slave cpu enter exception */ +#define DCPU_SSTEP 0x8 /* CPU is single stepping */ + +struct debuggerinfo_struct { + void *debuggerinfo; + struct task_struct *task; + int exception_state; + int ret_state; + int irq_depth; +}; + +extern struct debuggerinfo_struct kgdb_info[]; + +/* kernel debug core break point routines */ +extern int dbg_remove_all_break(void); +extern int dbg_set_sw_break(unsigned long addr); +extern int dbg_remove_sw_break(unsigned long addr); +extern int dbg_activate_sw_breakpoints(void); +extern int dbg_deactivate_sw_breakpoints(void); + +/* polled character access to i/o module */ +extern int dbg_io_get_char(void); + +/* stub return value for switching between the gdbstub and kdb */ +#define DBG_PASS_EVENT -12345 +/* Switch from one cpu to another */ +#define DBG_SWITCH_CPU_EVENT -123456 +extern int dbg_switch_cpu; + +/* gdbstub interface functions */ +extern int gdb_serial_stub(struct kgdb_state *ks); +extern void gdbstub_msg_write(const char *s, int len); + +/* gdbstub functions used for kdb <-> gdbstub transition */ +extern int gdbstub_state(struct kgdb_state *ks, char *cmd); +extern int dbg_kdb_mode; + +#ifdef CONFIG_KGDB_KDB +extern int kdb_stub(struct kgdb_state *ks); +extern int kdb_parse(const char *cmdstr); +#else /* ! CONFIG_KGDB_KDB */ +static inline int kdb_stub(struct kgdb_state *ks) +{ + return DBG_PASS_EVENT; +} +#endif /* CONFIG_KGDB_KDB */ + +#endif /* _DEBUG_CORE_H_ */ diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c new file mode 100644 index 0000000..4b17b32 --- /dev/null +++ b/kernel/debug/gdbstub.c @@ -0,0 +1,1017 @@ +/* + * Kernel Debug Core + * + * Maintainer: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (C) 2000-2001 VERITAS Software Corporation. + * Copyright (C) 2002-2004 Timesys Corporation + * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> + * Copyright (C) 2004 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> + * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. + * Copyright (C) 2005-2009 Wind River Systems, Inc. + * Copyright (C) 2007 MontaVista Software, Inc. + * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> + * + * Contributors at various stages not listed above: + * Jason Wessel ( jason.wessel@windriver.com ) + * George Anzinger <george@mvista.com> + * Anurekh Saxena (anurekh.saxena@timesys.com) + * Lake Stevens Instrument Division (Glenn Engel) + * Jim Kingdon, Cygnus Support. + * + * Original KGDB stub: David Grothe <dave@gcom.com>, + * Tigran Aivazian <tigran@sco.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/reboot.h> +#include <linux/uaccess.h> +#include <asm/cacheflush.h> +#include <asm/unaligned.h> +#include "debug_core.h" + +#define KGDB_MAX_THREAD_QUERY 17 + +/* Our I/O buffers. */ +static char remcom_in_buffer[BUFMAX]; +static char remcom_out_buffer[BUFMAX]; + +/* Storage for the registers, in GDB format. */ +static unsigned long gdb_regs[(NUMREGBYTES + + sizeof(unsigned long) - 1) / + sizeof(unsigned long)]; + +/* + * GDB remote protocol parser: + */ + +static int hex(char ch) +{ + if ((ch >= 'a') && (ch <= 'f')) + return ch - 'a' + 10; + if ((ch >= '0') && (ch <= '9')) + return ch - '0'; + if ((ch >= 'A') && (ch <= 'F')) + return ch - 'A' + 10; + return -1; +} + +#ifdef CONFIG_KGDB_KDB +static int gdbstub_read_wait(void) +{ + int ret = -1; + int i; + + /* poll any additional I/O interfaces that are defined */ + while (ret < 0) + for (i = 0; kdb_poll_funcs[i] != NULL; i++) { + ret = kdb_poll_funcs[i](); + if (ret > 0) + break; + } + return ret; +} +#else +static int gdbstub_read_wait(void) +{ + int ret = dbg_io_ops->read_char(); + while (ret == NO_POLL_CHAR) + ret = dbg_io_ops->read_char(); + return ret; +} +#endif +/* scan for the sequence $<data>#<checksum> */ +static void get_packet(char *buffer) +{ + unsigned char checksum; + unsigned char xmitcsum; + int count; + char ch; + + do { + /* + * Spin and wait around for the start character, ignore all + * other characters: + */ + while ((ch = (gdbstub_read_wait())) != '$') + /* nothing */; + + kgdb_connected = 1; + checksum = 0; + xmitcsum = -1; + + count = 0; + + /* + * now, read until a # or end of buffer is found: + */ + while (count < (BUFMAX - 1)) { + ch = gdbstub_read_wait(); + if (ch == '#') + break; + checksum = checksum + ch; + buffer[count] = ch; + count = count + 1; + } + buffer[count] = 0; + + if (ch == '#') { + xmitcsum = hex(gdbstub_read_wait()) << 4; + xmitcsum += hex(gdbstub_read_wait()); + + if (checksum != xmitcsum) + /* failed checksum */ + dbg_io_ops->write_char('-'); + else + /* successful transfer */ + dbg_io_ops->write_char('+'); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + } + } while (checksum != xmitcsum); +} + +/* + * Send the packet in buffer. + * Check for gdb connection if asked for. + */ +static void put_packet(char *buffer) +{ + unsigned char checksum; + int count; + char ch; + + /* + * $<packet info>#<checksum>. + */ + while (1) { + dbg_io_ops->write_char('$'); + checksum = 0; + count = 0; + + while ((ch = buffer[count])) { + dbg_io_ops->write_char(ch); + checksum += ch; + count++; + } + + dbg_io_ops->write_char('#'); + dbg_io_ops->write_char(hex_asc_hi(checksum)); + dbg_io_ops->write_char(hex_asc_lo(checksum)); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + + /* Now see what we get in reply. */ + ch = gdbstub_read_wait(); + + if (ch == 3) + ch = gdbstub_read_wait(); + + /* If we get an ACK, we are done. */ + if (ch == '+') + return; + + /* + * If we get the start of another packet, this means + * that GDB is attempting to reconnect. We will NAK + * the packet being sent, and stop trying to send this + * packet. + */ + if (ch == '$') { + dbg_io_ops->write_char('-'); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + return; + } + } +} + +static char gdbmsgbuf[BUFMAX + 1]; + +void gdbstub_msg_write(const char *s, int len) +{ + char *bufptr; + int wcount; + int i; + + if (len == 0) + len = strlen(s); + + /* 'O'utput */ + gdbmsgbuf[0] = 'O'; + + /* Fill and send buffers... */ + while (len > 0) { + bufptr = gdbmsgbuf + 1; + + /* Calculate how many this time */ + if ((len << 1) > (BUFMAX - 2)) + wcount = (BUFMAX - 2) >> 1; + else + wcount = len; + + /* Pack in hex chars */ + for (i = 0; i < wcount; i++) + bufptr = pack_hex_byte(bufptr, s[i]); + *bufptr = '\0'; + + /* Move up */ + s += wcount; + len -= wcount; + + /* Write packet */ + put_packet(gdbmsgbuf); + } +} + +/* + * Convert the memory pointed to by mem into hex, placing result in + * buf. Return a pointer to the last char put in buf (null). May + * return an error. + */ +int kgdb_mem2hex(char *mem, char *buf, int count) +{ + char *tmp; + int err; + + /* + * We use the upper half of buf as an intermediate buffer for the + * raw memory copy. Hex conversion will work against this one. + */ + tmp = buf + count; + + err = probe_kernel_read(tmp, mem, count); + if (!err) { + while (count > 0) { + buf = pack_hex_byte(buf, *tmp); + tmp++; + count--; + } + + *buf = 0; + } + + return err; +} + +/* + * Convert the hex array pointed to by buf into binary to be placed in + * mem. Return a pointer to the character AFTER the last byte + * written. May return an error. + */ +int kgdb_hex2mem(char *buf, char *mem, int count) +{ + char *tmp_raw; + char *tmp_hex; + + /* + * We use the upper half of buf as an intermediate buffer for the + * raw memory that is converted from hex. + */ + tmp_raw = buf + count * 2; + + tmp_hex = tmp_raw - 1; + while (tmp_hex >= buf) { + tmp_raw--; + *tmp_raw = hex(*tmp_hex--); + *tmp_raw |= hex(*tmp_hex--) << 4; + } + + return probe_kernel_write(mem, tmp_raw, count); +} + +/* + * While we find nice hex chars, build a long_val. + * Return number of chars processed. + */ +int kgdb_hex2long(char **ptr, unsigned long *long_val) +{ + int hex_val; + int num = 0; + int negate = 0; + + *long_val = 0; + + if (**ptr == '-') { + negate = 1; + (*ptr)++; + } + while (**ptr) { + hex_val = hex(**ptr); + if (hex_val < 0) + break; + + *long_val = (*long_val << 4) | hex_val; + num++; + (*ptr)++; + } + + if (negate) + *long_val = -*long_val; + + return num; +} + +/* + * Copy the binary array pointed to by buf into mem. Fix $, #, and + * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success. + * The input buf is overwitten with the result to write to mem. + */ +static int kgdb_ebin2mem(char *buf, char *mem, int count) +{ + int size = 0; + char *c = buf; + + while (count-- > 0) { + c[size] = *buf++; + if (c[size] == 0x7d) + c[size] = *buf++ ^ 0x20; + size++; + } + + return probe_kernel_write(mem, c, size); +} + +/* Write memory due to an 'M' or 'X' packet. */ +static int write_mem_msg(int binary) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long addr; + unsigned long length; + int err; + + if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' && + kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') { + if (binary) + err = kgdb_ebin2mem(ptr, (char *)addr, length); + else + err = kgdb_hex2mem(ptr, (char *)addr, length); + if (err) + return err; + if (CACHE_FLUSH_IS_SAFE) + flush_icache_range(addr, addr + length); + return 0; + } + + return -EINVAL; +} + +static void error_packet(char *pkt, int error) +{ + error = -error; + pkt[0] = 'E'; + pkt[1] = hex_asc[(error / 10)]; + pkt[2] = hex_asc[(error % 10)]; + pkt[3] = '\0'; +} + +/* + * Thread ID accessors. We represent a flat TID space to GDB, where + * the per CPU idle threads (which under Linux all have PID 0) are + * remapped to negative TIDs. + */ + +#define BUF_THREAD_ID_SIZE 16 + +static char *pack_threadid(char *pkt, unsigned char *id) +{ + char *limit; + + limit = pkt + BUF_THREAD_ID_SIZE; + while (pkt < limit) + pkt = pack_hex_byte(pkt, *id++); + + return pkt; +} + +static void int_to_threadref(unsigned char *id, int value) +{ + unsigned char *scan; + int i = 4; + + scan = (unsigned char *)id; + while (i--) + *scan++ = 0; + put_unaligned_be32(value, scan); +} + +static struct task_struct *getthread(struct pt_regs *regs, int tid) +{ + /* + * Non-positive TIDs are remapped to the cpu shadow information + */ + if (tid == 0 || tid == -1) + tid = -atomic_read(&kgdb_active) - 2; + if (tid < -1 && tid > -NR_CPUS - 2) { + if (kgdb_info[-tid - 2].task) + return kgdb_info[-tid - 2].task; + else + return idle_task(-tid - 2); + } + if (tid <= 0) { + printk(KERN_ERR "KGDB: Internal thread select error\n"); + dump_stack(); + return NULL; + } + + /* + * find_task_by_pid_ns() does not take the tasklist lock anymore + * but is nicely RCU locked - hence is a pretty resilient + * thing to use: + */ + return find_task_by_pid_ns(tid, &init_pid_ns); +} + + +/* + * Remap normal tasks to their real PID, + * CPU shadow threads are mapped to -CPU - 2 + */ +static inline int shadow_pid(int realpid) +{ + if (realpid) + return realpid; + + return -raw_smp_processor_id() - 2; +} + +/* + * All the functions that start with gdb_cmd are the various + * operations to implement the handlers for the gdbserial protocol + * where KGDB is communicating with an external debugger + */ + +/* Handle the '?' status packets */ +static void gdb_cmd_status(struct kgdb_state *ks) +{ + /* + * We know that this packet is only sent + * during initial connect. So to be safe, + * we clear out our breakpoints now in case + * GDB is reconnecting. + */ + dbg_remove_all_break(); + + remcom_out_buffer[0] = 'S'; + pack_hex_byte(&remcom_out_buffer[1], ks->signo); +} + +/* Handle the 'g' get registers request */ +static void gdb_cmd_getregs(struct kgdb_state *ks) +{ + struct task_struct *thread; + void *local_debuggerinfo; + int i; + + thread = kgdb_usethread; + if (!thread) { + thread = kgdb_info[ks->cpu].task; + local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; + } else { + local_debuggerinfo = NULL; + for_each_online_cpu(i) { + /* + * Try to find the task on some other + * or possibly this node if we do not + * find the matching task then we try + * to approximate the results. + */ + if (thread == kgdb_info[i].task) + local_debuggerinfo = kgdb_info[i].debuggerinfo; + } + } + + /* + * All threads that don't have debuggerinfo should be + * in schedule() sleeping, since all other CPUs + * are in kgdb_wait, and thus have debuggerinfo. + */ + if (local_debuggerinfo) { + pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo); + } else { + /* + * Pull stuff saved during switch_to; nothing + * else is accessible (or even particularly + * relevant). + * + * This should be enough for a stack trace. + */ + sleeping_thread_to_gdb_regs(gdb_regs, thread); + } + kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES); +} + +/* Handle the 'G' set registers request */ +static void gdb_cmd_setregs(struct kgdb_state *ks) +{ + kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES); + + if (kgdb_usethread && kgdb_usethread != current) { + error_packet(remcom_out_buffer, -EINVAL); + } else { + gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs); + strcpy(remcom_out_buffer, "OK"); + } +} + +/* Handle the 'm' memory read bytes */ +static void gdb_cmd_memread(struct kgdb_state *ks) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long length; + unsigned long addr; + int err; + + if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' && + kgdb_hex2long(&ptr, &length) > 0) { + err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length); + if (err) + error_packet(remcom_out_buffer, err); + } else { + error_packet(remcom_out_buffer, -EINVAL); + } +} + +/* Handle the 'M' memory write bytes */ +static void gdb_cmd_memwrite(struct kgdb_state *ks) +{ + int err = write_mem_msg(0); + + if (err) + error_packet(remcom_out_buffer, err); + else + strcpy(remcom_out_buffer, "OK"); +} + +/* Handle the 'X' memory binary write bytes */ +static void gdb_cmd_binwrite(struct kgdb_state *ks) +{ + int err = write_mem_msg(1); + + if (err) + error_packet(remcom_out_buffer, err); + else + strcpy(remcom_out_buffer, "OK"); +} + +/* Handle the 'D' or 'k', detach or kill packets */ +static void gdb_cmd_detachkill(struct kgdb_state *ks) +{ + int error; + + /* The detach case */ + if (remcom_in_buffer[0] == 'D') { + error = dbg_remove_all_break(); + if (error < 0) { + error_packet(remcom_out_buffer, error); + } else { + strcpy(remcom_out_buffer, "OK"); + kgdb_connected = 0; + } + put_packet(remcom_out_buffer); + } else { + /* + * Assume the kill case, with no exit code checking, + * trying to force detach the debugger: + */ + dbg_remove_all_break(); + kgdb_connected = 0; + } +} + +/* Handle the 'R' reboot packets */ +static int gdb_cmd_reboot(struct kgdb_state *ks) +{ + /* For now, only honor R0 */ + if (strcmp(remcom_in_buffer, "R0") == 0) { + printk(KERN_CRIT "Executing emergency reboot\n"); + strcpy(remcom_out_buffer, "OK"); + put_packet(remcom_out_buffer); + + /* + * Execution should not return from + * machine_emergency_restart() + */ + machine_emergency_restart(); + kgdb_connected = 0; + + return 1; + } + return 0; +} + +/* Handle the 'q' query packets */ +static void gdb_cmd_query(struct kgdb_state *ks) +{ + struct task_struct *g; + struct task_struct *p; + unsigned char thref[8]; + char *ptr; + int i; + int cpu; + int finished = 0; + + switch (remcom_in_buffer[1]) { + case 's': + case 'f': + if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + + i = 0; + remcom_out_buffer[0] = 'm'; + ptr = remcom_out_buffer + 1; + if (remcom_in_buffer[1] == 'f') { + /* Each cpu is a shadow thread */ + for_each_online_cpu(cpu) { + ks->thr_query = 0; + int_to_threadref(thref, -cpu - 2); + pack_threadid(ptr, thref); + ptr += BUF_THREAD_ID_SIZE; + *(ptr++) = ','; + i++; + } + } + + do_each_thread(g, p) { + if (i >= ks->thr_query && !finished) { + int_to_threadref(thref, p->pid); + pack_threadid(ptr, thref); + ptr += BUF_THREAD_ID_SIZE; + *(ptr++) = ','; + ks->thr_query++; + if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) + finished = 1; + } + i++; + } while_each_thread(g, p); + + *(--ptr) = '\0'; + break; + + case 'C': + /* Current thread id */ + strcpy(remcom_out_buffer, "QC"); + ks->threadid = shadow_pid(current->pid); + int_to_threadref(thref, ks->threadid); + pack_threadid(remcom_out_buffer + 2, thref); + break; + case 'T': + if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + ks->threadid = 0; + ptr = remcom_in_buffer + 17; + kgdb_hex2long(&ptr, &ks->threadid); + if (!getthread(ks->linux_regs, ks->threadid)) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + if ((int)ks->threadid > 0) { + kgdb_mem2hex(getthread(ks->linux_regs, + ks->threadid)->comm, + remcom_out_buffer, 16); + } else { + static char tmpstr[23 + BUF_THREAD_ID_SIZE]; + + sprintf(tmpstr, "shadowCPU%d", + (int)(-ks->threadid - 2)); + kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); + } + break; +#ifdef CONFIG_KGDB_KDB + case 'R': + if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) { + int len = strlen(remcom_in_buffer + 6); + + if ((len % 2) != 0) { + strcpy(remcom_out_buffer, "E01"); + break; + } + kgdb_hex2mem(remcom_in_buffer + 6, + remcom_out_buffer, len); + len = len / 2; + remcom_out_buffer[len++] = 0; + + kdb_parse(remcom_out_buffer); + strcpy(remcom_out_buffer, "OK"); + } + break; +#endif + } +} + +/* Handle the 'H' task query packets */ +static void gdb_cmd_task(struct kgdb_state *ks) +{ + struct task_struct *thread; + char *ptr; + + switch (remcom_in_buffer[1]) { + case 'g': + ptr = &remcom_in_buffer[2]; + kgdb_hex2long(&ptr, &ks->threadid); + thread = getthread(ks->linux_regs, ks->threadid); + if (!thread && ks->threadid > 0) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + kgdb_usethread = thread; + ks->kgdb_usethreadid = ks->threadid; + strcpy(remcom_out_buffer, "OK"); + break; + case 'c': + ptr = &remcom_in_buffer[2]; + kgdb_hex2long(&ptr, &ks->threadid); + if (!ks->threadid) { + kgdb_contthread = NULL; + } else { + thread = getthread(ks->linux_regs, ks->threadid); + if (!thread && ks->threadid > 0) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + kgdb_contthread = thread; + } + strcpy(remcom_out_buffer, "OK"); + break; + } +} + +/* Handle the 'T' thread query packets */ +static void gdb_cmd_thread(struct kgdb_state *ks) +{ + char *ptr = &remcom_in_buffer[1]; + struct task_struct *thread; + + kgdb_hex2long(&ptr, &ks->threadid); + thread = getthread(ks->linux_regs, ks->threadid); + if (thread) + strcpy(remcom_out_buffer, "OK"); + else + error_packet(remcom_out_buffer, -EINVAL); +} + +/* Handle the 'z' or 'Z' breakpoint remove or set packets */ +static void gdb_cmd_break(struct kgdb_state *ks) +{ + /* + * Since GDB-5.3, it's been drafted that '0' is a software + * breakpoint, '1' is a hardware breakpoint, so let's do that. + */ + char *bpt_type = &remcom_in_buffer[1]; + char *ptr = &remcom_in_buffer[2]; + unsigned long addr; + unsigned long length; + int error = 0; + + if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') { + /* Unsupported */ + if (*bpt_type > '4') + return; + } else { + if (*bpt_type != '0' && *bpt_type != '1') + /* Unsupported. */ + return; + } + + /* + * Test if this is a hardware breakpoint, and + * if we support it: + */ + if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)) + /* Unsupported. */ + return; + + if (*(ptr++) != ',') { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + if (!kgdb_hex2long(&ptr, &addr)) { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + if (*(ptr++) != ',' || + !kgdb_hex2long(&ptr, &length)) { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + + if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0') + error = dbg_set_sw_break(addr); + else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0') + error = dbg_remove_sw_break(addr); + else if (remcom_in_buffer[0] == 'Z') + error = arch_kgdb_ops.set_hw_breakpoint(addr, + (int)length, *bpt_type - '0'); + else if (remcom_in_buffer[0] == 'z') + error = arch_kgdb_ops.remove_hw_breakpoint(addr, + (int) length, *bpt_type - '0'); + + if (error == 0) + strcpy(remcom_out_buffer, "OK"); + else + error_packet(remcom_out_buffer, error); +} + +/* Handle the 'C' signal / exception passing packets */ +static int gdb_cmd_exception_pass(struct kgdb_state *ks) +{ + /* C09 == pass exception + * C15 == detach kgdb, pass exception + */ + if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') { + + ks->pass_exception = 1; + remcom_in_buffer[0] = 'c'; + + } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') { + + ks->pass_exception = 1; + remcom_in_buffer[0] = 'D'; + dbg_remove_all_break(); + kgdb_connected = 0; + return 1; + + } else { + gdbstub_msg_write("KGDB only knows signal 9 (pass)" + " and 15 (pass and disconnect)\n" + "Executing a continue without signal passing\n", 0); + remcom_in_buffer[0] = 'c'; + } + + /* Indicate fall through */ + return -1; +} + +/* + * This function performs all gdbserial command procesing + */ +int gdb_serial_stub(struct kgdb_state *ks) +{ + int error = 0; + int tmp; + + /* Clear the out buffer. */ + memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); + + if (kgdb_connected) { + unsigned char thref[8]; + char *ptr; + + /* Reply to host that an exception has occurred */ + ptr = remcom_out_buffer; + *ptr++ = 'T'; + ptr = pack_hex_byte(ptr, ks->signo); + ptr += strlen(strcpy(ptr, "thread:")); + int_to_threadref(thref, shadow_pid(current->pid)); + ptr = pack_threadid(ptr, thref); + *ptr++ = ';'; + put_packet(remcom_out_buffer); + } + + kgdb_usethread = kgdb_info[ks->cpu].task; + ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid); + ks->pass_exception = 0; + + while (1) { + error = 0; + + /* Clear the out buffer. */ + memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); + + get_packet(remcom_in_buffer); + + switch (remcom_in_buffer[0]) { + case '?': /* gdbserial status */ + gdb_cmd_status(ks); + break; + case 'g': /* return the value of the CPU registers */ + gdb_cmd_getregs(ks); + break; + case 'G': /* set the value of the CPU registers - return OK */ + gdb_cmd_setregs(ks); + break; + case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ + gdb_cmd_memread(ks); + break; + case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */ + gdb_cmd_memwrite(ks); + break; + case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */ + gdb_cmd_binwrite(ks); + break; + /* kill or detach. KGDB should treat this like a + * continue. + */ + case 'D': /* Debugger detach */ + case 'k': /* Debugger detach via kill */ + gdb_cmd_detachkill(ks); + goto default_handle; + case 'R': /* Reboot */ + if (gdb_cmd_reboot(ks)) + goto default_handle; + break; + case 'q': /* query command */ + gdb_cmd_query(ks); + break; + case 'H': /* task related */ + gdb_cmd_task(ks); + break; + case 'T': /* Query thread status */ + gdb_cmd_thread(ks); + break; + case 'z': /* Break point remove */ + case 'Z': /* Break point set */ + gdb_cmd_break(ks); + break; +#ifdef CONFIG_KGDB_KDB + case '3': /* Escape into back into kdb */ + if (remcom_in_buffer[1] == '\0') { + gdb_cmd_detachkill(ks); + return DBG_PASS_EVENT; + } +#endif + case 'C': /* Exception passing */ + tmp = gdb_cmd_exception_pass(ks); + if (tmp > 0) + goto default_handle; + if (tmp == 0) + break; + /* Fall through on tmp < 0 */ + case 'c': /* Continue packet */ + case 's': /* Single step packet */ + if (kgdb_contthread && kgdb_contthread != current) { + /* Can't switch threads in kgdb */ + error_packet(remcom_out_buffer, -EINVAL); + break; + } + dbg_activate_sw_breakpoints(); + /* Fall through to default processing */ + default: +default_handle: + error = kgdb_arch_handle_exception(ks->ex_vector, + ks->signo, + ks->err_code, + remcom_in_buffer, + remcom_out_buffer, + ks->linux_regs); + /* + * Leave cmd processing on error, detach, + * kill, continue, or single step. + */ + if (error >= 0 || remcom_in_buffer[0] == 'D' || + remcom_in_buffer[0] == 'k') { + error = 0; + goto kgdb_exit; + } + + } + + /* reply to the request */ + put_packet(remcom_out_buffer); + } + +kgdb_exit: + if (ks->pass_exception) + error = 1; + return error; +} + +int gdbstub_state(struct kgdb_state *ks, char *cmd) +{ + int error; + + switch (cmd[0]) { + case 'e': + error = kgdb_arch_handle_exception(ks->ex_vector, + ks->signo, + ks->err_code, + remcom_in_buffer, + remcom_out_buffer, + ks->linux_regs); + return error; + case 's': + case 'c': + strcpy(remcom_in_buffer, cmd); + return 0; + case '?': + gdb_cmd_status(ks); + break; + case '\0': + strcpy(remcom_out_buffer, ""); + break; + } + dbg_io_ops->write_char('+'); + put_packet(remcom_out_buffer); + return 0; +} diff --git a/kernel/debug/kdb/.gitignore b/kernel/debug/kdb/.gitignore new file mode 100644 index 0000000..396d12e --- /dev/null +++ b/kernel/debug/kdb/.gitignore @@ -0,0 +1 @@ +gen-kdb_cmds.c diff --git a/kernel/debug/kdb/Makefile b/kernel/debug/kdb/Makefile new file mode 100644 index 0000000..d4fc58f --- /dev/null +++ b/kernel/debug/kdb/Makefile @@ -0,0 +1,25 @@ +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. +# Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. +# + +CCVERSION := $(shell $(CC) -v 2>&1 | sed -ne '$$p') +obj-y := kdb_io.o kdb_main.o kdb_support.o kdb_bt.o gen-kdb_cmds.o kdb_bp.o kdb_debugger.o +obj-$(CONFIG_KDB_KEYBOARD) += kdb_keyboard.o + +clean-files := gen-kdb_cmds.c + +quiet_cmd_gen-kdb = GENKDB $@ + cmd_gen-kdb = $(AWK) 'BEGIN {print "\#include <linux/stddef.h>"; print "\#include <linux/init.h>"} \ + /^\#/{next} \ + /^[ \t]*$$/{next} \ + {gsub(/"/, "\\\"", $$0); \ + print "static __initdata char kdb_cmd" cmds++ "[] = \"" $$0 "\\n\";"} \ + END {print "extern char *kdb_cmds[]; char __initdata *kdb_cmds[] = {"; for (i = 0; i < cmds; ++i) {print " kdb_cmd" i ","}; print(" NULL\n};");}' \ + $(filter-out %/Makefile,$^) > $@# + +$(obj)/gen-kdb_cmds.c: $(src)/kdb_cmds $(src)/Makefile + $(call cmd,gen-kdb) diff --git a/kernel/debug/kdb/kdb_bp.c b/kernel/debug/kdb/kdb_bp.c new file mode 100644 index 0000000..75bd9b3 --- /dev/null +++ b/kernel/debug/kdb/kdb_bp.c @@ -0,0 +1,564 @@ +/* + * Kernel Debugger Architecture Independent Breakpoint Handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/kdb.h> +#include <linux/kgdb.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include "kdb_private.h" + +/* + * Table of kdb_breakpoints + */ +kdb_bp_t kdb_breakpoints[KDB_MAXBPT]; + +static void kdb_setsinglestep(struct pt_regs *regs) +{ + KDB_STATE_SET(DOING_SS); +} + +static char *kdb_rwtypes[] = { + "Instruction(i)", + "Instruction(Register)", + "Data Write", + "I/O", + "Data Access" +}; + +static char *kdb_bptype(kdb_bp_t *bp) +{ + if (bp->bp_type < 0 || bp->bp_type > 4) + return ""; + + return kdb_rwtypes[bp->bp_type]; +} + +static int kdb_parsebp(int argc, const char **argv, int *nextargp, kdb_bp_t *bp) +{ + int nextarg = *nextargp; + int diag; + + bp->bph_length = 1; + if ((argc + 1) != nextarg) { + if (strnicmp(argv[nextarg], "datar", sizeof("datar")) == 0) + bp->bp_type = BP_ACCESS_WATCHPOINT; + else if (strnicmp(argv[nextarg], "dataw", sizeof("dataw")) == 0) + bp->bp_type = BP_WRITE_WATCHPOINT; + else if (strnicmp(argv[nextarg], "inst", sizeof("inst")) == 0) + bp->bp_type = BP_HARDWARE_BREAKPOINT; + else + return KDB_ARGCOUNT; + + bp->bph_length = 1; + + nextarg++; + + if ((argc + 1) != nextarg) { + unsigned long len; + + diag = kdbgetularg((char *)argv[nextarg], + &len); + if (diag) + return diag; + + + if (len > 8) + return KDB_BADLENGTH; + + bp->bph_length = len; + nextarg++; + } + + if ((argc + 1) != nextarg) + return KDB_ARGCOUNT; + } + + *nextargp = nextarg; + return 0; +} + +static int _kdb_bp_remove(kdb_bp_t *bp) +{ + int ret = 1; + if (!bp->bp_installed) + return ret; + if (!bp->bp_type) + ret = dbg_remove_sw_break(bp->bp_addr); + else + ret = arch_kgdb_ops.remove_hw_breakpoint(bp->bp_addr, + bp->bph_length, + bp->bp_type); + if (ret == 0) + bp->bp_installed = 0; + return ret; +} + +static void kdb_handle_bp(struct pt_regs *regs, kdb_bp_t *bp) +{ + if (KDB_DEBUG(BP)) + kdb_printf("regs->ip = 0x%lx\n", instruction_pointer(regs)); + + /* + * Setup single step + */ + kdb_setsinglestep(regs); + + /* + * Reset delay attribute + */ + bp->bp_delay = 0; + bp->bp_delayed = 1; +} + +static int _kdb_bp_install(struct pt_regs *regs, kdb_bp_t *bp) +{ + int ret; + /* + * Install the breakpoint, if it is not already installed. + */ + + if (KDB_DEBUG(BP)) + kdb_printf("%s: bp_installed %d\n", + __func__, bp->bp_installed); + if (!KDB_STATE(SSBPT)) + bp->bp_delay = 0; + if (bp->bp_installed) + return 1; + if (bp->bp_delay || (bp->bp_delayed && KDB_STATE(DOING_SS))) { + if (KDB_DEBUG(BP)) + kdb_printf("%s: delayed bp\n", __func__); + kdb_handle_bp(regs, bp); + return 0; + } + if (!bp->bp_type) + ret = dbg_set_sw_break(bp->bp_addr); + else + ret = arch_kgdb_ops.set_hw_breakpoint(bp->bp_addr, + bp->bph_length, + bp->bp_type); + if (ret == 0) { + bp->bp_installed = 1; + } else { + kdb_printf("%s: failed to set breakpoint at 0x%lx\n", + __func__, bp->bp_addr); + return 1; + } + return 0; +} + +/* + * kdb_bp_install + * + * Install kdb_breakpoints prior to returning from the + * kernel debugger. This allows the kdb_breakpoints to be set + * upon functions that are used internally by kdb, such as + * printk(). This function is only called once per kdb session. + */ +void kdb_bp_install(struct pt_regs *regs) +{ + int i; + + for (i = 0; i < KDB_MAXBPT; i++) { + kdb_bp_t *bp = &kdb_breakpoints[i]; + + if (KDB_DEBUG(BP)) { + kdb_printf("%s: bp %d bp_enabled %d\n", + __func__, i, bp->bp_enabled); + } + if (bp->bp_enabled) + _kdb_bp_install(regs, bp); + } +} + +/* + * kdb_bp_remove + * + * Remove kdb_breakpoints upon entry to the kernel debugger. + * + * Parameters: + * None. + * Outputs: + * None. + * Returns: + * None. + * Locking: + * None. + * Remarks: + */ +void kdb_bp_remove(void) +{ + int i; + + for (i = KDB_MAXBPT - 1; i >= 0; i--) { + kdb_bp_t *bp = &kdb_breakpoints[i]; + + if (KDB_DEBUG(BP)) { + kdb_printf("%s: bp %d bp_enabled %d\n", + __func__, i, bp->bp_enabled); + } + if (bp->bp_enabled) + _kdb_bp_remove(bp); + } +} + + +/* + * kdb_printbp + * + * Internal function to format and print a breakpoint entry. + * + * Parameters: + * None. + * Outputs: + * None. + * Returns: + * None. + * Locking: + * None. + * Remarks: + */ + +static void kdb_printbp(kdb_bp_t *bp, int i) +{ + kdb_printf("%s ", kdb_bptype(bp)); + kdb_printf("BP #%d at ", i); + kdb_symbol_print(bp->bp_addr, NULL, KDB_SP_DEFAULT); + + if (bp->bp_enabled) + kdb_printf("\n is enabled"); + else + kdb_printf("\n is disabled"); + + kdb_printf("\taddr at %016lx, hardtype=%d installed=%d\n", + bp->bp_addr, bp->bp_type, bp->bp_installed); + + kdb_printf("\n"); +} + +/* + * kdb_bp + * + * Handle the bp commands. + * + * [bp|bph] <addr-expression> [DATAR|DATAW] + * + * Parameters: + * argc Count of arguments in argv + * argv Space delimited command line arguments + * Outputs: + * None. + * Returns: + * Zero for success, a kdb diagnostic if failure. + * Locking: + * None. + * Remarks: + * + * bp Set breakpoint on all cpus. Only use hardware assist if need. + * bph Set breakpoint on all cpus. Force hardware register + */ + +static int kdb_bp(int argc, const char **argv) +{ + int i, bpno; + kdb_bp_t *bp, *bp_check; + int diag; + int free; + char *symname = NULL; + long offset = 0ul; + int nextarg; + kdb_bp_t template = {0}; + + if (argc == 0) { + /* + * Display breakpoint table + */ + for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; + bpno++, bp++) { + if (bp->bp_free) + continue; + kdb_printbp(bp, bpno); + } + + return 0; + } + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &template.bp_addr, + &offset, &symname); + if (diag) + return diag; + if (!template.bp_addr) + return KDB_BADINT; + + /* + * Find an empty bp structure to allocate + */ + free = KDB_MAXBPT; + for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; bpno++, bp++) { + if (bp->bp_free) + break; + } + + if (bpno == KDB_MAXBPT) + return KDB_TOOMANYBPT; + + if (strcmp(argv[0], "bph") == 0) { + template.bp_type = BP_HARDWARE_BREAKPOINT; + diag = kdb_parsebp(argc, argv, &nextarg, &template); + if (diag) + return diag; + } else { + template.bp_type = BP_BREAKPOINT; + } + + /* + * Check for clashing breakpoints. + * + * Note, in this design we can't have hardware breakpoints + * enabled for both read and write on the same address. + */ + for (i = 0, bp_check = kdb_breakpoints; i < KDB_MAXBPT; + i++, bp_check++) { + if (!bp_check->bp_free && + bp_check->bp_addr == template.bp_addr) { + kdb_printf("You already have a breakpoint at " + kdb_bfd_vma_fmt0 "\n", template.bp_addr); + return KDB_DUPBPT; + } + } + + template.bp_enabled = 1; + + /* + * Actually allocate the breakpoint found earlier + */ + *bp = template; + bp->bp_free = 0; + + kdb_printbp(bp, bpno); + + return 0; +} + +/* + * kdb_bc + * + * Handles the 'bc', 'be', and 'bd' commands + * + * [bd|bc|be] <breakpoint-number> + * [bd|bc|be] * + * + * Parameters: + * argc Count of arguments in argv + * argv Space delimited command line arguments + * Outputs: + * None. + * Returns: + * Zero for success, a kdb diagnostic for failure + * Locking: + * None. + * Remarks: + */ +static int kdb_bc(int argc, const char **argv) +{ + unsigned long addr; + kdb_bp_t *bp = NULL; + int lowbp = KDB_MAXBPT; + int highbp = 0; + int done = 0; + int i; + int diag = 0; + + int cmd; /* KDBCMD_B? */ +#define KDBCMD_BC 0 +#define KDBCMD_BE 1 +#define KDBCMD_BD 2 + + if (strcmp(argv[0], "be") == 0) + cmd = KDBCMD_BE; + else if (strcmp(argv[0], "bd") == 0) + cmd = KDBCMD_BD; + else + cmd = KDBCMD_BC; + + if (argc != 1) + return KDB_ARGCOUNT; + + if (strcmp(argv[1], "*") == 0) { + lowbp = 0; + highbp = KDB_MAXBPT; + } else { + diag = kdbgetularg(argv[1], &addr); + if (diag) + return diag; + + /* + * For addresses less than the maximum breakpoint number, + * assume that the breakpoint number is desired. + */ + if (addr < KDB_MAXBPT) { + bp = &kdb_breakpoints[addr]; + lowbp = highbp = addr; + highbp++; + } else { + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; + i++, bp++) { + if (bp->bp_addr == addr) { + lowbp = highbp = i; + highbp++; + break; + } + } + } + } + + /* + * Now operate on the set of breakpoints matching the input + * criteria (either '*' for all, or an individual breakpoint). + */ + for (bp = &kdb_breakpoints[lowbp], i = lowbp; + i < highbp; + i++, bp++) { + if (bp->bp_free) + continue; + + done++; + + switch (cmd) { + case KDBCMD_BC: + bp->bp_enabled = 0; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " cleared\n", + i, bp->bp_addr); + + bp->bp_addr = 0; + bp->bp_free = 1; + + break; + case KDBCMD_BE: + bp->bp_enabled = 1; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " enabled", + i, bp->bp_addr); + + kdb_printf("\n"); + break; + case KDBCMD_BD: + if (!bp->bp_enabled) + break; + + bp->bp_enabled = 0; + + kdb_printf("Breakpoint %d at " + kdb_bfd_vma_fmt " disabled\n", + i, bp->bp_addr); + + break; + } + if (bp->bp_delay && (cmd == KDBCMD_BC || cmd == KDBCMD_BD)) { + bp->bp_delay = 0; + KDB_STATE_CLEAR(SSBPT); + } + } + + return (!done) ? KDB_BPTNOTFOUND : 0; +} + +/* + * kdb_ss + * + * Process the 'ss' (Single Step) and 'ssb' (Single Step to Branch) + * commands. + * + * ss + * ssb + * + * Parameters: + * argc Argument count + * argv Argument vector + * Outputs: + * None. + * Returns: + * KDB_CMD_SS[B] for success, a kdb error if failure. + * Locking: + * None. + * Remarks: + * + * Set the arch specific option to trigger a debug trap after the next + * instruction. + * + * For 'ssb', set the trace flag in the debug trap handler + * after printing the current insn and return directly without + * invoking the kdb command processor, until a branch instruction + * is encountered. + */ + +static int kdb_ss(int argc, const char **argv) +{ + int ssb = 0; + + ssb = (strcmp(argv[0], "ssb") == 0); + if (argc != 0) + return KDB_ARGCOUNT; + /* + * Set trace flag and go. + */ + KDB_STATE_SET(DOING_SS); + if (ssb) { + KDB_STATE_SET(DOING_SSB); + return KDB_CMD_SSB; + } + return KDB_CMD_SS; +} + +/* Initialize the breakpoint table and register breakpoint commands. */ + +void __init kdb_initbptab(void) +{ + int i; + kdb_bp_t *bp; + + /* + * First time initialization. + */ + memset(&kdb_breakpoints, '\0', sizeof(kdb_breakpoints)); + + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) + bp->bp_free = 1; + + kdb_register_repeat("bp", kdb_bp, "[<vaddr>]", + "Set/Display breakpoints", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("bl", kdb_bp, "[<vaddr>]", + "Display breakpoints", 0, KDB_REPEAT_NO_ARGS); + if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) + kdb_register_repeat("bph", kdb_bp, "[<vaddr>]", + "[datar [length]|dataw [length]] Set hw brk", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("bc", kdb_bc, "<bpnum>", + "Clear Breakpoint", 0, KDB_REPEAT_NONE); + kdb_register_repeat("be", kdb_bc, "<bpnum>", + "Enable Breakpoint", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bd", kdb_bc, "<bpnum>", + "Disable Breakpoint", 0, KDB_REPEAT_NONE); + + kdb_register_repeat("ss", kdb_ss, "", + "Single Step", 1, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("ssb", kdb_ss, "", + "Single step to branch/call", 0, KDB_REPEAT_NO_ARGS); + /* + * Architecture dependent initialization. + */ +} diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c new file mode 100644 index 0000000..2f62fe8 --- /dev/null +++ b/kernel/debug/kdb/kdb_bt.c @@ -0,0 +1,210 @@ +/* + * Kernel Debugger Architecture Independent Stack Traceback + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/kdb.h> +#include <linux/nmi.h> +#include <asm/system.h> +#include "kdb_private.h" + + +static void kdb_show_stack(struct task_struct *p, void *addr) +{ + int old_lvl = console_loglevel; + console_loglevel = 15; + kdb_trap_printk++; + kdb_set_current_task(p); + if (addr) { + show_stack((struct task_struct *)p, addr); + } else if (kdb_current_regs) { +#ifdef CONFIG_X86 + show_stack(p, &kdb_current_regs->sp); +#else + show_stack(p, NULL); +#endif + } else { + show_stack(p, NULL); + } + console_loglevel = old_lvl; + kdb_trap_printk--; +} + +/* + * kdb_bt + * + * This function implements the 'bt' command. Print a stack + * traceback. + * + * bt [<address-expression>] (addr-exp is for alternate stacks) + * btp <pid> Kernel stack for <pid> + * btt <address-expression> Kernel stack for task structure at + * <address-expression> + * bta [DRSTCZEUIMA] All useful processes, optionally + * filtered by state + * btc [<cpu>] The current process on one cpu, + * default is all cpus + * + * bt <address-expression> refers to a address on the stack, that location + * is assumed to contain a return address. + * + * btt <address-expression> refers to the address of a struct task. + * + * Inputs: + * argc argument count + * argv argument vector + * Outputs: + * None. + * Returns: + * zero for success, a kdb diagnostic if error + * Locking: + * none. + * Remarks: + * Backtrack works best when the code uses frame pointers. But even + * without frame pointers we should get a reasonable trace. + * + * mds comes in handy when examining the stack to do a manual traceback or + * to get a starting point for bt <address-expression>. + */ + +static int +kdb_bt1(struct task_struct *p, unsigned long mask, + int argcount, int btaprompt) +{ + char buffer[2]; + if (kdb_getarea(buffer[0], (unsigned long)p) || + kdb_getarea(buffer[0], (unsigned long)(p+1)-1)) + return KDB_BADADDR; + if (!kdb_task_state(p, mask)) + return 0; + kdb_printf("Stack traceback for pid %d\n", p->pid); + kdb_ps1(p); + kdb_show_stack(p, NULL); + if (btaprompt) { + kdb_getstr(buffer, sizeof(buffer), + "Enter <q> to end, <cr> to continue:"); + if (buffer[0] == 'q') { + kdb_printf("\n"); + return 1; + } + } + touch_nmi_watchdog(); + return 0; +} + +int +kdb_bt(int argc, const char **argv) +{ + int diag; + int argcount = 5; + int btaprompt = 1; + int nextarg; + unsigned long addr; + long offset; + + kdbgetintenv("BTARGS", &argcount); /* Arguments to print */ + kdbgetintenv("BTAPROMPT", &btaprompt); /* Prompt after each + * proc in bta */ + + if (strcmp(argv[0], "bta") == 0) { + struct task_struct *g, *p; + unsigned long cpu; + unsigned long mask = kdb_task_state_string(argc ? argv[1] : + NULL); + if (argc == 0) + kdb_ps_suppressed(); + /* Run the active tasks first */ + for_each_online_cpu(cpu) { + p = kdb_curr_task(cpu); + if (kdb_bt1(p, mask, argcount, btaprompt)) + return 0; + } + /* Now the inactive tasks */ + kdb_do_each_thread(g, p) { + if (task_curr(p)) + continue; + if (kdb_bt1(p, mask, argcount, btaprompt)) + return 0; + } kdb_while_each_thread(g, p); + } else if (strcmp(argv[0], "btp") == 0) { + struct task_struct *p; + unsigned long pid; + if (argc != 1) + return KDB_ARGCOUNT; + diag = kdbgetularg((char *)argv[1], &pid); + if (diag) + return diag; + p = find_task_by_pid_ns(pid, &init_pid_ns); + if (p) { + kdb_set_current_task(p); + return kdb_bt1(p, ~0UL, argcount, 0); + } + kdb_printf("No process with pid == %ld found\n", pid); + return 0; + } else if (strcmp(argv[0], "btt") == 0) { + if (argc != 1) + return KDB_ARGCOUNT; + diag = kdbgetularg((char *)argv[1], &addr); + if (diag) + return diag; + kdb_set_current_task((struct task_struct *)addr); + return kdb_bt1((struct task_struct *)addr, ~0UL, argcount, 0); + } else if (strcmp(argv[0], "btc") == 0) { + unsigned long cpu = ~0; + struct task_struct *save_current_task = kdb_current_task; + char buf[80]; + if (argc > 1) + return KDB_ARGCOUNT; + if (argc == 1) { + diag = kdbgetularg((char *)argv[1], &cpu); + if (diag) + return diag; + } + /* Recursive use of kdb_parse, do not use argv after + * this point */ + argv = NULL; + if (cpu != ~0) { + if (cpu >= num_possible_cpus() || !cpu_online(cpu)) { + kdb_printf("no process for cpu %ld\n", cpu); + return 0; + } + sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu)); + kdb_parse(buf); + return 0; + } + kdb_printf("btc: cpu status: "); + kdb_parse("cpu\n"); + for_each_online_cpu(cpu) { + sprintf(buf, "btt 0x%p\n", KDB_TSK(cpu)); + kdb_parse(buf); + touch_nmi_watchdog(); + } + kdb_set_current_task(save_current_task); + return 0; + } else { + if (argc) { + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, + &offset, NULL); + if (diag) + return diag; + kdb_show_stack(kdb_current_task, (void *)addr); + return 0; + } else { + return kdb_bt1(kdb_current_task, ~0UL, argcount, 0); + } + } + + /* NOTREACHED */ + return 0; +} diff --git a/kernel/debug/kdb/kdb_cmds b/kernel/debug/kdb/kdb_cmds new file mode 100644 index 0000000..56c88e4 --- /dev/null +++ b/kernel/debug/kdb/kdb_cmds @@ -0,0 +1,35 @@ +# Initial commands for kdb, alter to suit your needs. +# These commands are executed in kdb_init() context, no SMP, no +# processes. Commands that require process data (including stack or +# registers) are not reliable this early. set and bp commands should +# be safe. Global breakpoint commands affect each cpu as it is booted. + +# Standard debugging information for first level support, just type archkdb +# or archkdbcpu or archkdbshort at the kdb prompt. + +defcmd dumpcommon "" "Common kdb debugging" + set BTAPROMPT 0 + set LINES 10000 + -summary + -cpu + -ps + -dmesg 600 + -bt +endefcmd + +defcmd dumpall "" "First line debugging" + set BTSYMARG 1 + set BTARGS 9 + pid R + -dumpcommon + -bta +endefcmd + +defcmd dumpcpu "" "Same as dumpall but only tasks on cpus" + set BTSYMARG 1 + set BTARGS 9 + pid R + -dumpcommon + -btc +endefcmd + diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c new file mode 100644 index 0000000..bf6e827 --- /dev/null +++ b/kernel/debug/kdb/kdb_debugger.c @@ -0,0 +1,169 @@ +/* + * Created by: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/kdebug.h> +#include "kdb_private.h" +#include "../debug_core.h" + +/* + * KDB interface to KGDB internals + */ +get_char_func kdb_poll_funcs[] = { + dbg_io_get_char, + NULL, + NULL, + NULL, + NULL, + NULL, +}; +EXPORT_SYMBOL_GPL(kdb_poll_funcs); + +int kdb_poll_idx = 1; +EXPORT_SYMBOL_GPL(kdb_poll_idx); + +int kdb_stub(struct kgdb_state *ks) +{ + int error = 0; + kdb_bp_t *bp; + unsigned long addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs); + kdb_reason_t reason = KDB_REASON_OOPS; + kdb_dbtrap_t db_result = KDB_DB_NOBPT; + int i; + + if (KDB_STATE(REENTRY)) { + reason = KDB_REASON_SWITCH; + KDB_STATE_CLEAR(REENTRY); + addr = instruction_pointer(ks->linux_regs); + } + ks->pass_exception = 0; + if (atomic_read(&kgdb_setting_breakpoint)) + reason = KDB_REASON_KEYBOARD; + + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) { + if ((bp->bp_enabled) && (bp->bp_addr == addr)) { + reason = KDB_REASON_BREAK; + db_result = KDB_DB_BPT; + if (addr != instruction_pointer(ks->linux_regs)) + kgdb_arch_set_pc(ks->linux_regs, addr); + break; + } + } + if (reason == KDB_REASON_BREAK || reason == KDB_REASON_SWITCH) { + for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++) { + if (bp->bp_free) + continue; + if (bp->bp_addr == addr) { + bp->bp_delay = 1; + bp->bp_delayed = 1; + /* + * SSBPT is set when the kernel debugger must single step a + * task in order to re-establish an instruction breakpoint + * which uses the instruction replacement mechanism. It is + * cleared by any action that removes the need to single-step + * the breakpoint. + */ + reason = KDB_REASON_BREAK; + db_result = KDB_DB_BPT; + KDB_STATE_SET(SSBPT); + break; + } + } + } + + if (reason != KDB_REASON_BREAK && ks->ex_vector == 0 && + ks->signo == SIGTRAP) { + reason = KDB_REASON_SSTEP; + db_result = KDB_DB_BPT; + } + /* Set initial kdb state variables */ + KDB_STATE_CLEAR(KGDB_TRANS); + kdb_initial_cpu = ks->cpu; + kdb_current_task = kgdb_info[ks->cpu].task; + kdb_current_regs = kgdb_info[ks->cpu].debuggerinfo; + /* Remove any breakpoints as needed by kdb and clear single step */ + kdb_bp_remove(); + KDB_STATE_CLEAR(DOING_SS); + KDB_STATE_CLEAR(DOING_SSB); + KDB_STATE_SET(PAGER); + /* zero out any offline cpu data */ + for_each_present_cpu(i) { + if (!cpu_online(i)) { + kgdb_info[i].debuggerinfo = NULL; + kgdb_info[i].task = NULL; + } + } + if (ks->err_code == DIE_OOPS || reason == KDB_REASON_OOPS) { + ks->pass_exception = 1; + KDB_FLAG_SET(CATASTROPHIC); + } + kdb_initial_cpu = ks->cpu; + if (KDB_STATE(SSBPT) && reason == KDB_REASON_SSTEP) { + KDB_STATE_CLEAR(SSBPT); + KDB_STATE_CLEAR(DOING_SS); + } else { + /* Start kdb main loop */ + error = kdb_main_loop(KDB_REASON_ENTER, reason, + ks->err_code, db_result, ks->linux_regs); + } + /* + * Upon exit from the kdb main loop setup break points and restart + * the system based on the requested continue state + */ + kdb_initial_cpu = -1; + kdb_current_task = NULL; + kdb_current_regs = NULL; + KDB_STATE_CLEAR(PAGER); + kdbnearsym_cleanup(); + if (error == KDB_CMD_KGDB) { + if (KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2)) { + /* + * This inteface glue which allows kdb to transition in into + * the gdb stub. In order to do this the '?' or '' gdb serial + * packet response is processed here. And then control is + * passed to the gdbstub. + */ + if (KDB_STATE(DOING_KGDB)) + gdbstub_state(ks, "?"); + else + gdbstub_state(ks, ""); + KDB_STATE_CLEAR(DOING_KGDB); + KDB_STATE_CLEAR(DOING_KGDB2); + } + return DBG_PASS_EVENT; + } + kdb_bp_install(ks->linux_regs); + dbg_activate_sw_breakpoints(); + /* Set the exit state to a single step or a continue */ + if (KDB_STATE(DOING_SS)) + gdbstub_state(ks, "s"); + else + gdbstub_state(ks, "c"); + + KDB_FLAG_CLEAR(CATASTROPHIC); + + /* Invoke arch specific exception handling prior to system resume */ + kgdb_info[ks->cpu].ret_state = gdbstub_state(ks, "e"); + if (ks->pass_exception) + kgdb_info[ks->cpu].ret_state = 1; + if (error == KDB_CMD_CPU) { + KDB_STATE_SET(REENTRY); + /* + * Force clear the single step bit because kdb emulates this + * differently vs the gdbstub + */ + kgdb_single_step = 0; + dbg_deactivate_sw_breakpoints(); + return DBG_SWITCH_CPU_EVENT; + } + return kgdb_info[ks->cpu].ret_state; +} + diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c new file mode 100644 index 0000000..c9b7f4f9 --- /dev/null +++ b/kernel/debug/kdb/kdb_io.c @@ -0,0 +1,826 @@ +/* + * Kernel Debugger Architecture Independent Console I/O handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/ctype.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/kdev_t.h> +#include <linux/console.h> +#include <linux/string.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/nmi.h> +#include <linux/delay.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/kallsyms.h> +#include "kdb_private.h" + +#define CMD_BUFLEN 256 +char kdb_prompt_str[CMD_BUFLEN]; + +int kdb_trap_printk; + +static void kgdb_transition_check(char *buffer) +{ + int slen = strlen(buffer); + if (strncmp(buffer, "$?#3f", slen) != 0 && + strncmp(buffer, "$qSupported#37", slen) != 0 && + strncmp(buffer, "+$qSupported#37", slen) != 0) { + KDB_STATE_SET(KGDB_TRANS); + kdb_printf("%s", buffer); + } +} + +static int kdb_read_get_key(char *buffer, size_t bufsize) +{ +#define ESCAPE_UDELAY 1000 +#define ESCAPE_DELAY (2*1000000/ESCAPE_UDELAY) /* 2 seconds worth of udelays */ + char escape_data[5]; /* longest vt100 escape sequence is 4 bytes */ + char *ped = escape_data; + int escape_delay = 0; + get_char_func *f, *f_escape = NULL; + int key; + + for (f = &kdb_poll_funcs[0]; ; ++f) { + if (*f == NULL) { + /* Reset NMI watchdog once per poll loop */ + touch_nmi_watchdog(); + f = &kdb_poll_funcs[0]; + } + if (escape_delay == 2) { + *ped = '\0'; + ped = escape_data; + --escape_delay; + } + if (escape_delay == 1) { + key = *ped++; + if (!*ped) + --escape_delay; + break; + } + key = (*f)(); + if (key == -1) { + if (escape_delay) { + udelay(ESCAPE_UDELAY); + --escape_delay; + } + continue; + } + if (bufsize <= 2) { + if (key == '\r') + key = '\n'; + *buffer++ = key; + *buffer = '\0'; + return -1; + } + if (escape_delay == 0 && key == '\e') { + escape_delay = ESCAPE_DELAY; + ped = escape_data; + f_escape = f; + } + if (escape_delay) { + *ped++ = key; + if (f_escape != f) { + escape_delay = 2; + continue; + } + if (ped - escape_data == 1) { + /* \e */ + continue; + } else if (ped - escape_data == 2) { + /* \e<something> */ + if (key != '[') + escape_delay = 2; + continue; + } else if (ped - escape_data == 3) { + /* \e[<something> */ + int mapkey = 0; + switch (key) { + case 'A': /* \e[A, up arrow */ + mapkey = 16; + break; + case 'B': /* \e[B, down arrow */ + mapkey = 14; + break; + case 'C': /* \e[C, right arrow */ + mapkey = 6; + break; + case 'D': /* \e[D, left arrow */ + mapkey = 2; + break; + case '1': /* dropthrough */ + case '3': /* dropthrough */ + /* \e[<1,3,4>], may be home, del, end */ + case '4': + mapkey = -1; + break; + } + if (mapkey != -1) { + if (mapkey > 0) { + escape_data[0] = mapkey; + escape_data[1] = '\0'; + } + escape_delay = 2; + } + continue; + } else if (ped - escape_data == 4) { + /* \e[<1,3,4><something> */ + int mapkey = 0; + if (key == '~') { + switch (escape_data[2]) { + case '1': /* \e[1~, home */ + mapkey = 1; + break; + case '3': /* \e[3~, del */ + mapkey = 4; + break; + case '4': /* \e[4~, end */ + mapkey = 5; + break; + } + } + if (mapkey > 0) { + escape_data[0] = mapkey; + escape_data[1] = '\0'; + } + escape_delay = 2; + continue; + } + } + break; /* A key to process */ + } + return key; +} + +/* + * kdb_read + * + * This function reads a string of characters, terminated by + * a newline, or by reaching the end of the supplied buffer, + * from the current kernel debugger console device. + * Parameters: + * buffer - Address of character buffer to receive input characters. + * bufsize - size, in bytes, of the character buffer + * Returns: + * Returns a pointer to the buffer containing the received + * character string. This string will be terminated by a + * newline character. + * Locking: + * No locks are required to be held upon entry to this + * function. It is not reentrant - it relies on the fact + * that while kdb is running on only one "master debug" cpu. + * Remarks: + * + * The buffer size must be >= 2. A buffer size of 2 means that the caller only + * wants a single key. + * + * An escape key could be the start of a vt100 control sequence such as \e[D + * (left arrow) or it could be a character in its own right. The standard + * method for detecting the difference is to wait for 2 seconds to see if there + * are any other characters. kdb is complicated by the lack of a timer service + * (interrupts are off), by multiple input sources and by the need to sometimes + * return after just one key. Escape sequence processing has to be done as + * states in the polling loop. + */ + +static char *kdb_read(char *buffer, size_t bufsize) +{ + char *cp = buffer; + char *bufend = buffer+bufsize-2; /* Reserve space for newline + * and null byte */ + char *lastchar; + char *p_tmp; + char tmp; + static char tmpbuffer[CMD_BUFLEN]; + int len = strlen(buffer); + int len_tmp; + int tab = 0; + int count; + int i; + int diag, dtab_count; + int key; + + + diag = kdbgetintenv("DTABCOUNT", &dtab_count); + if (diag) + dtab_count = 30; + + if (len > 0) { + cp += len; + if (*(buffer+len-1) == '\n') + cp--; + } + + lastchar = cp; + *cp = '\0'; + kdb_printf("%s", buffer); +poll_again: + key = kdb_read_get_key(buffer, bufsize); + if (key == -1) + return buffer; + if (key != 9) + tab = 0; + switch (key) { + case 8: /* backspace */ + if (cp > buffer) { + if (cp < lastchar) { + memcpy(tmpbuffer, cp, lastchar - cp); + memcpy(cp-1, tmpbuffer, lastchar - cp); + } + *(--lastchar) = '\0'; + --cp; + kdb_printf("\b%s \r", cp); + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } + break; + case 13: /* enter */ + *lastchar++ = '\n'; + *lastchar++ = '\0'; + kdb_printf("\n"); + return buffer; + case 4: /* Del */ + if (cp < lastchar) { + memcpy(tmpbuffer, cp+1, lastchar - cp - 1); + memcpy(cp, tmpbuffer, lastchar - cp - 1); + *(--lastchar) = '\0'; + kdb_printf("%s \r", cp); + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } + break; + case 1: /* Home */ + if (cp > buffer) { + kdb_printf("\r"); + kdb_printf(kdb_prompt_str); + cp = buffer; + } + break; + case 5: /* End */ + if (cp < lastchar) { + kdb_printf("%s", cp); + cp = lastchar; + } + break; + case 2: /* Left */ + if (cp > buffer) { + kdb_printf("\b"); + --cp; + } + break; + case 14: /* Down */ + memset(tmpbuffer, ' ', + strlen(kdb_prompt_str) + (lastchar-buffer)); + *(tmpbuffer+strlen(kdb_prompt_str) + + (lastchar-buffer)) = '\0'; + kdb_printf("\r%s\r", tmpbuffer); + *lastchar = (char)key; + *(lastchar+1) = '\0'; + return lastchar; + case 6: /* Right */ + if (cp < lastchar) { + kdb_printf("%c", *cp); + ++cp; + } + break; + case 16: /* Up */ + memset(tmpbuffer, ' ', + strlen(kdb_prompt_str) + (lastchar-buffer)); + *(tmpbuffer+strlen(kdb_prompt_str) + + (lastchar-buffer)) = '\0'; + kdb_printf("\r%s\r", tmpbuffer); + *lastchar = (char)key; + *(lastchar+1) = '\0'; + return lastchar; + case 9: /* Tab */ + if (tab < 2) + ++tab; + p_tmp = buffer; + while (*p_tmp == ' ') + p_tmp++; + if (p_tmp > cp) + break; + memcpy(tmpbuffer, p_tmp, cp-p_tmp); + *(tmpbuffer + (cp-p_tmp)) = '\0'; + p_tmp = strrchr(tmpbuffer, ' '); + if (p_tmp) + ++p_tmp; + else + p_tmp = tmpbuffer; + len = strlen(p_tmp); + count = kallsyms_symbol_complete(p_tmp, + sizeof(tmpbuffer) - + (p_tmp - tmpbuffer)); + if (tab == 2 && count > 0) { + kdb_printf("\n%d symbols are found.", count); + if (count > dtab_count) { + count = dtab_count; + kdb_printf(" But only first %d symbols will" + " be printed.\nYou can change the" + " environment variable DTABCOUNT.", + count); + } + kdb_printf("\n"); + for (i = 0; i < count; i++) { + if (kallsyms_symbol_next(p_tmp, i) < 0) + break; + kdb_printf("%s ", p_tmp); + *(p_tmp + len) = '\0'; + } + if (i >= dtab_count) + kdb_printf("..."); + kdb_printf("\n"); + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + } else if (tab != 2 && count > 0) { + len_tmp = strlen(p_tmp); + strncpy(p_tmp+len_tmp, cp, lastchar-cp+1); + len_tmp = strlen(p_tmp); + strncpy(cp, p_tmp+len, len_tmp-len + 1); + len = len_tmp - len; + kdb_printf("%s", cp); + cp += len; + lastchar += len; + } + kdb_nextline = 1; /* reset output line number */ + break; + default: + if (key >= 32 && lastchar < bufend) { + if (cp < lastchar) { + memcpy(tmpbuffer, cp, lastchar - cp); + memcpy(cp+1, tmpbuffer, lastchar - cp); + *++lastchar = '\0'; + *cp = key; + kdb_printf("%s\r", cp); + ++cp; + tmp = *cp; + *cp = '\0'; + kdb_printf(kdb_prompt_str); + kdb_printf("%s", buffer); + *cp = tmp; + } else { + *++lastchar = '\0'; + *cp++ = key; + /* The kgdb transition check will hide + * printed characters if we think that + * kgdb is connecting, until the check + * fails */ + if (!KDB_STATE(KGDB_TRANS)) + kgdb_transition_check(buffer); + else + kdb_printf("%c", key); + } + /* Special escape to kgdb */ + if (lastchar - buffer >= 5 && + strcmp(lastchar - 5, "$?#3f") == 0) { + strcpy(buffer, "kgdb"); + KDB_STATE_SET(DOING_KGDB); + return buffer; + } + if (lastchar - buffer >= 14 && + strcmp(lastchar - 14, "$qSupported#37") == 0) { + strcpy(buffer, "kgdb"); + KDB_STATE_SET(DOING_KGDB2); + return buffer; + } + } + break; + } + goto poll_again; +} + +/* + * kdb_getstr + * + * Print the prompt string and read a command from the + * input device. + * + * Parameters: + * buffer Address of buffer to receive command + * bufsize Size of buffer in bytes + * prompt Pointer to string to use as prompt string + * Returns: + * Pointer to command buffer. + * Locking: + * None. + * Remarks: + * For SMP kernels, the processor number will be + * substituted for %d, %x or %o in the prompt. + */ + +char *kdb_getstr(char *buffer, size_t bufsize, char *prompt) +{ + if (prompt && kdb_prompt_str != prompt) + strncpy(kdb_prompt_str, prompt, CMD_BUFLEN); + kdb_printf(kdb_prompt_str); + kdb_nextline = 1; /* Prompt and input resets line number */ + return kdb_read(buffer, bufsize); +} + +/* + * kdb_input_flush + * + * Get rid of any buffered console input. + * + * Parameters: + * none + * Returns: + * nothing + * Locking: + * none + * Remarks: + * Call this function whenever you want to flush input. If there is any + * outstanding input, it ignores all characters until there has been no + * data for approximately 1ms. + */ + +static void kdb_input_flush(void) +{ + get_char_func *f; + int res; + int flush_delay = 1; + while (flush_delay) { + flush_delay--; +empty: + touch_nmi_watchdog(); + for (f = &kdb_poll_funcs[0]; *f; ++f) { + res = (*f)(); + if (res != -1) { + flush_delay = 1; + goto empty; + } + } + if (flush_delay) + mdelay(1); + } +} + +/* + * kdb_printf + * + * Print a string to the output device(s). + * + * Parameters: + * printf-like format and optional args. + * Returns: + * 0 + * Locking: + * None. + * Remarks: + * use 'kdbcons->write()' to avoid polluting 'log_buf' with + * kdb output. + * + * If the user is doing a cmd args | grep srch + * then kdb_grepping_flag is set. + * In that case we need to accumulate full lines (ending in \n) before + * searching for the pattern. + */ + +static char kdb_buffer[256]; /* A bit too big to go on stack */ +static char *next_avail = kdb_buffer; +static int size_avail; +static int suspend_grep; + +/* + * search arg1 to see if it contains arg2 + * (kdmain.c provides flags for ^pat and pat$) + * + * return 1 for found, 0 for not found + */ +static int kdb_search_string(char *searched, char *searchfor) +{ + char firstchar, *cp; + int len1, len2; + + /* not counting the newline at the end of "searched" */ + len1 = strlen(searched)-1; + len2 = strlen(searchfor); + if (len1 < len2) + return 0; + if (kdb_grep_leading && kdb_grep_trailing && len1 != len2) + return 0; + if (kdb_grep_leading) { + if (!strncmp(searched, searchfor, len2)) + return 1; + } else if (kdb_grep_trailing) { + if (!strncmp(searched+len1-len2, searchfor, len2)) + return 1; + } else { + firstchar = *searchfor; + cp = searched; + while ((cp = strchr(cp, firstchar))) { + if (!strncmp(cp, searchfor, len2)) + return 1; + cp++; + } + } + return 0; +} + +int vkdb_printf(const char *fmt, va_list ap) +{ + int diag; + int linecount; + int logging, saved_loglevel = 0; + int saved_trap_printk; + int got_printf_lock = 0; + int retlen = 0; + int fnd, len; + char *cp, *cp2, *cphold = NULL, replaced_byte = ' '; + char *moreprompt = "more> "; + struct console *c = console_drivers; + static DEFINE_SPINLOCK(kdb_printf_lock); + unsigned long uninitialized_var(flags); + + preempt_disable(); + saved_trap_printk = kdb_trap_printk; + kdb_trap_printk = 0; + + /* Serialize kdb_printf if multiple cpus try to write at once. + * But if any cpu goes recursive in kdb, just print the output, + * even if it is interleaved with any other text. + */ + if (!KDB_STATE(PRINTF_LOCK)) { + KDB_STATE_SET(PRINTF_LOCK); + spin_lock_irqsave(&kdb_printf_lock, flags); + got_printf_lock = 1; + atomic_inc(&kdb_event); + } else { + __acquire(kdb_printf_lock); + } + + diag = kdbgetintenv("LINES", &linecount); + if (diag || linecount <= 1) + linecount = 24; + + diag = kdbgetintenv("LOGGING", &logging); + if (diag) + logging = 0; + + if (!kdb_grepping_flag || suspend_grep) { + /* normally, every vsnprintf starts a new buffer */ + next_avail = kdb_buffer; + size_avail = sizeof(kdb_buffer); + } + vsnprintf(next_avail, size_avail, fmt, ap); + + /* + * If kdb_parse() found that the command was cmd xxx | grep yyy + * then kdb_grepping_flag is set, and kdb_grep_string contains yyy + * + * Accumulate the print data up to a newline before searching it. + * (vsnprintf does null-terminate the string that it generates) + */ + + /* skip the search if prints are temporarily unconditional */ + if (!suspend_grep && kdb_grepping_flag) { + cp = strchr(kdb_buffer, '\n'); + if (!cp) { + /* + * Special cases that don't end with newlines + * but should be written without one: + * The "[nn]kdb> " prompt should + * appear at the front of the buffer. + * + * The "[nn]more " prompt should also be + * (MOREPROMPT -> moreprompt) + * written * but we print that ourselves, + * we set the suspend_grep flag to make + * it unconditional. + * + */ + if (next_avail == kdb_buffer) { + /* + * these should occur after a newline, + * so they will be at the front of the + * buffer + */ + cp2 = kdb_buffer; + len = strlen(kdb_prompt_str); + if (!strncmp(cp2, kdb_prompt_str, len)) { + /* + * We're about to start a new + * command, so we can go back + * to normal mode. + */ + kdb_grepping_flag = 0; + goto kdb_printit; + } + } + /* no newline; don't search/write the buffer + until one is there */ + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + goto kdb_print_out; + } + + /* + * The newline is present; print through it or discard + * it, depending on the results of the search. + */ + cp++; /* to byte after the newline */ + replaced_byte = *cp; /* remember what/where it was */ + cphold = cp; + *cp = '\0'; /* end the string for our search */ + + /* + * We now have a newline at the end of the string + * Only continue with this output if it contains the + * search string. + */ + fnd = kdb_search_string(kdb_buffer, kdb_grep_string); + if (!fnd) { + /* + * At this point the complete line at the start + * of kdb_buffer can be discarded, as it does + * not contain what the user is looking for. + * Shift the buffer left. + */ + *cphold = replaced_byte; + strcpy(kdb_buffer, cphold); + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + goto kdb_print_out; + } + /* + * at this point the string is a full line and + * should be printed, up to the null. + */ + } +kdb_printit: + + /* + * Write to all consoles. + */ + retlen = strlen(kdb_buffer); + if (!dbg_kdb_mode && kgdb_connected) { + gdbstub_msg_write(kdb_buffer, retlen); + } else { + if (!dbg_io_ops->is_console) { + len = strlen(kdb_buffer); + cp = kdb_buffer; + while (len--) { + dbg_io_ops->write_char(*cp); + cp++; + } + } + while (c) { + c->write(c, kdb_buffer, retlen); + touch_nmi_watchdog(); + c = c->next; + } + } + if (logging) { + saved_loglevel = console_loglevel; + console_loglevel = 0; + printk(KERN_INFO "%s", kdb_buffer); + } + + if (KDB_STATE(PAGER) && strchr(kdb_buffer, '\n')) + kdb_nextline++; + + /* check for having reached the LINES number of printed lines */ + if (kdb_nextline == linecount) { + char buf1[16] = ""; +#if defined(CONFIG_SMP) + char buf2[32]; +#endif + + /* Watch out for recursion here. Any routine that calls + * kdb_printf will come back through here. And kdb_read + * uses kdb_printf to echo on serial consoles ... + */ + kdb_nextline = 1; /* In case of recursion */ + + /* + * Pause until cr. + */ + moreprompt = kdbgetenv("MOREPROMPT"); + if (moreprompt == NULL) + moreprompt = "more> "; + +#if defined(CONFIG_SMP) + if (strchr(moreprompt, '%')) { + sprintf(buf2, moreprompt, get_cpu()); + put_cpu(); + moreprompt = buf2; + } +#endif + + kdb_input_flush(); + c = console_drivers; + + if (!dbg_io_ops->is_console) { + len = strlen(moreprompt); + cp = moreprompt; + while (len--) { + dbg_io_ops->write_char(*cp); + cp++; + } + } + while (c) { + c->write(c, moreprompt, strlen(moreprompt)); + touch_nmi_watchdog(); + c = c->next; + } + + if (logging) + printk("%s", moreprompt); + + kdb_read(buf1, 2); /* '2' indicates to return + * immediately after getting one key. */ + kdb_nextline = 1; /* Really set output line 1 */ + + /* empty and reset the buffer: */ + kdb_buffer[0] = '\0'; + next_avail = kdb_buffer; + size_avail = sizeof(kdb_buffer); + if ((buf1[0] == 'q') || (buf1[0] == 'Q')) { + /* user hit q or Q */ + KDB_FLAG_SET(CMD_INTERRUPT); /* command interrupted */ + KDB_STATE_CLEAR(PAGER); + /* end of command output; back to normal mode */ + kdb_grepping_flag = 0; + kdb_printf("\n"); + } else if (buf1[0] == ' ') { + kdb_printf("\n"); + suspend_grep = 1; /* for this recursion */ + } else if (buf1[0] == '\n') { + kdb_nextline = linecount - 1; + kdb_printf("\r"); + suspend_grep = 1; /* for this recursion */ + } else if (buf1[0] && buf1[0] != '\n') { + /* user hit something other than enter */ + suspend_grep = 1; /* for this recursion */ + kdb_printf("\nOnly 'q' or 'Q' are processed at more " + "prompt, input ignored\n"); + } else if (kdb_grepping_flag) { + /* user hit enter */ + suspend_grep = 1; /* for this recursion */ + kdb_printf("\n"); + } + kdb_input_flush(); + } + + /* + * For grep searches, shift the printed string left. + * replaced_byte contains the character that was overwritten with + * the terminating null, and cphold points to the null. + * Then adjust the notion of available space in the buffer. + */ + if (kdb_grepping_flag && !suspend_grep) { + *cphold = replaced_byte; + strcpy(kdb_buffer, cphold); + len = strlen(kdb_buffer); + next_avail = kdb_buffer + len; + size_avail = sizeof(kdb_buffer) - len; + } + +kdb_print_out: + suspend_grep = 0; /* end of what may have been a recursive call */ + if (logging) + console_loglevel = saved_loglevel; + if (KDB_STATE(PRINTF_LOCK) && got_printf_lock) { + got_printf_lock = 0; + spin_unlock_irqrestore(&kdb_printf_lock, flags); + KDB_STATE_CLEAR(PRINTF_LOCK); + atomic_dec(&kdb_event); + } else { + __release(kdb_printf_lock); + } + kdb_trap_printk = saved_trap_printk; + preempt_enable(); + return retlen; +} + +int kdb_printf(const char *fmt, ...) +{ + va_list ap; + int r; + + va_start(ap, fmt); + r = vkdb_printf(fmt, ap); + va_end(ap); + + return r; +} + diff --git a/kernel/debug/kdb/kdb_keyboard.c b/kernel/debug/kdb/kdb_keyboard.c new file mode 100644 index 0000000..4bca634 --- /dev/null +++ b/kernel/debug/kdb/kdb_keyboard.c @@ -0,0 +1,212 @@ +/* + * Kernel Debugger Architecture Dependent Console I/O handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Copyright (c) 1999-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/kdb.h> +#include <linux/keyboard.h> +#include <linux/ctype.h> +#include <linux/module.h> +#include <linux/io.h> + +/* Keyboard Controller Registers on normal PCs. */ + +#define KBD_STATUS_REG 0x64 /* Status register (R) */ +#define KBD_DATA_REG 0x60 /* Keyboard data register (R/W) */ + +/* Status Register Bits */ + +#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ +#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ + +static int kbd_exists; + +/* + * Check if the keyboard controller has a keypress for us. + * Some parts (Enter Release, LED change) are still blocking polled here, + * but hopefully they are all short. + */ +int kdb_get_kbd_char(void) +{ + int scancode, scanstatus; + static int shift_lock; /* CAPS LOCK state (0-off, 1-on) */ + static int shift_key; /* Shift next keypress */ + static int ctrl_key; + u_short keychar; + + if (KDB_FLAG(NO_I8042) || KDB_FLAG(NO_VT_CONSOLE) || + (inb(KBD_STATUS_REG) == 0xff && inb(KBD_DATA_REG) == 0xff)) { + kbd_exists = 0; + return -1; + } + kbd_exists = 1; + + if ((inb(KBD_STATUS_REG) & KBD_STAT_OBF) == 0) + return -1; + + /* + * Fetch the scancode + */ + scancode = inb(KBD_DATA_REG); + scanstatus = inb(KBD_STATUS_REG); + + /* + * Ignore mouse events. + */ + if (scanstatus & KBD_STAT_MOUSE_OBF) + return -1; + + /* + * Ignore release, trigger on make + * (except for shift keys, where we want to + * keep the shift state so long as the key is + * held down). + */ + + if (((scancode&0x7f) == 0x2a) || ((scancode&0x7f) == 0x36)) { + /* + * Next key may use shift table + */ + if ((scancode & 0x80) == 0) + shift_key = 1; + else + shift_key = 0; + return -1; + } + + if ((scancode&0x7f) == 0x1d) { + /* + * Left ctrl key + */ + if ((scancode & 0x80) == 0) + ctrl_key = 1; + else + ctrl_key = 0; + return -1; + } + + if ((scancode & 0x80) != 0) + return -1; + + scancode &= 0x7f; + + /* + * Translate scancode + */ + + if (scancode == 0x3a) { + /* + * Toggle caps lock + */ + shift_lock ^= 1; + +#ifdef KDB_BLINK_LED + kdb_toggleled(0x4); +#endif + return -1; + } + + if (scancode == 0x0e) { + /* + * Backspace + */ + return 8; + } + + /* Special Key */ + switch (scancode) { + case 0xF: /* Tab */ + return 9; + case 0x53: /* Del */ + return 4; + case 0x47: /* Home */ + return 1; + case 0x4F: /* End */ + return 5; + case 0x4B: /* Left */ + return 2; + case 0x48: /* Up */ + return 16; + case 0x50: /* Down */ + return 14; + case 0x4D: /* Right */ + return 6; + } + + if (scancode == 0xe0) + return -1; + + /* + * For Japanese 86/106 keyboards + * See comment in drivers/char/pc_keyb.c. + * - Masahiro Adegawa + */ + if (scancode == 0x73) + scancode = 0x59; + else if (scancode == 0x7d) + scancode = 0x7c; + + if (!shift_lock && !shift_key && !ctrl_key) { + keychar = plain_map[scancode]; + } else if ((shift_lock || shift_key) && key_maps[1]) { + keychar = key_maps[1][scancode]; + } else if (ctrl_key && key_maps[4]) { + keychar = key_maps[4][scancode]; + } else { + keychar = 0x0020; + kdb_printf("Unknown state/scancode (%d)\n", scancode); + } + keychar &= 0x0fff; + if (keychar == '\t') + keychar = ' '; + switch (KTYP(keychar)) { + case KT_LETTER: + case KT_LATIN: + if (isprint(keychar)) + break; /* printable characters */ + /* drop through */ + case KT_SPEC: + if (keychar == K_ENTER) + break; + /* drop through */ + default: + return -1; /* ignore unprintables */ + } + + if ((scancode & 0x7f) == 0x1c) { + /* + * enter key. All done. Absorb the release scancode. + */ + while ((inb(KBD_STATUS_REG) & KBD_STAT_OBF) == 0) + ; + + /* + * Fetch the scancode + */ + scancode = inb(KBD_DATA_REG); + scanstatus = inb(KBD_STATUS_REG); + + while (scanstatus & KBD_STAT_MOUSE_OBF) { + scancode = inb(KBD_DATA_REG); + scanstatus = inb(KBD_STATUS_REG); + } + + if (scancode != 0x9c) { + /* + * Wasn't an enter-release, why not? + */ + kdb_printf("kdb: expected enter got 0x%x status 0x%x\n", + scancode, scanstatus); + } + + return 13; + } + + return keychar & 0xff; +} +EXPORT_SYMBOL_GPL(kdb_get_kbd_char); diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c new file mode 100644 index 0000000..b724c79 --- /dev/null +++ b/kernel/debug/kdb/kdb_main.c @@ -0,0 +1,2849 @@ +/* + * Kernel Debugger Architecture Independent Main Code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (C) 2000 Stephane Eranian <eranian@hpl.hp.com> + * Xscale (R) modifications copyright (C) 2003 Intel Corporation. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/sched.h> +#include <linux/sysrq.h> +#include <linux/smp.h> +#include <linux/utsname.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/kallsyms.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/notifier.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/nmi.h> +#include <linux/time.h> +#include <linux/ptrace.h> +#include <linux/sysctl.h> +#include <linux/cpu.h> +#include <linux/kdebug.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> +#include <linux/slab.h> +#include "kdb_private.h" + +#define GREP_LEN 256 +char kdb_grep_string[GREP_LEN]; +int kdb_grepping_flag; +EXPORT_SYMBOL(kdb_grepping_flag); +int kdb_grep_leading; +int kdb_grep_trailing; + +/* + * Kernel debugger state flags + */ +int kdb_flags; +atomic_t kdb_event; + +/* + * kdb_lock protects updates to kdb_initial_cpu. Used to + * single thread processors through the kernel debugger. + */ +int kdb_initial_cpu = -1; /* cpu number that owns kdb */ +int kdb_nextline = 1; +int kdb_state; /* General KDB state */ + +struct task_struct *kdb_current_task; +EXPORT_SYMBOL(kdb_current_task); +struct pt_regs *kdb_current_regs; + +const char *kdb_diemsg; +static int kdb_go_count; +#ifdef CONFIG_KDB_CONTINUE_CATASTROPHIC +static unsigned int kdb_continue_catastrophic = + CONFIG_KDB_CONTINUE_CATASTROPHIC; +#else +static unsigned int kdb_continue_catastrophic; +#endif + +/* kdb_commands describes the available commands. */ +static kdbtab_t *kdb_commands; +#define KDB_BASE_CMD_MAX 50 +static int kdb_max_commands = KDB_BASE_CMD_MAX; +static kdbtab_t kdb_base_commands[50]; +#define for_each_kdbcmd(cmd, num) \ + for ((cmd) = kdb_base_commands, (num) = 0; \ + num < kdb_max_commands; \ + num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++) + +typedef struct _kdbmsg { + int km_diag; /* kdb diagnostic */ + char *km_msg; /* Corresponding message text */ +} kdbmsg_t; + +#define KDBMSG(msgnum, text) \ + { KDB_##msgnum, text } + +static kdbmsg_t kdbmsgs[] = { + KDBMSG(NOTFOUND, "Command Not Found"), + KDBMSG(ARGCOUNT, "Improper argument count, see usage."), + KDBMSG(BADWIDTH, "Illegal value for BYTESPERWORD use 1, 2, 4 or 8, " + "8 is only allowed on 64 bit systems"), + KDBMSG(BADRADIX, "Illegal value for RADIX use 8, 10 or 16"), + KDBMSG(NOTENV, "Cannot find environment variable"), + KDBMSG(NOENVVALUE, "Environment variable should have value"), + KDBMSG(NOTIMP, "Command not implemented"), + KDBMSG(ENVFULL, "Environment full"), + KDBMSG(ENVBUFFULL, "Environment buffer full"), + KDBMSG(TOOMANYBPT, "Too many breakpoints defined"), +#ifdef CONFIG_CPU_XSCALE + KDBMSG(TOOMANYDBREGS, "More breakpoints than ibcr registers defined"), +#else + KDBMSG(TOOMANYDBREGS, "More breakpoints than db registers defined"), +#endif + KDBMSG(DUPBPT, "Duplicate breakpoint address"), + KDBMSG(BPTNOTFOUND, "Breakpoint not found"), + KDBMSG(BADMODE, "Invalid IDMODE"), + KDBMSG(BADINT, "Illegal numeric value"), + KDBMSG(INVADDRFMT, "Invalid symbolic address format"), + KDBMSG(BADREG, "Invalid register name"), + KDBMSG(BADCPUNUM, "Invalid cpu number"), + KDBMSG(BADLENGTH, "Invalid length field"), + KDBMSG(NOBP, "No Breakpoint exists"), + KDBMSG(BADADDR, "Invalid address"), +}; +#undef KDBMSG + +static const int __nkdb_err = sizeof(kdbmsgs) / sizeof(kdbmsg_t); + + +/* + * Initial environment. This is all kept static and local to + * this file. We don't want to rely on the memory allocation + * mechanisms in the kernel, so we use a very limited allocate-only + * heap for new and altered environment variables. The entire + * environment is limited to a fixed number of entries (add more + * to __env[] if required) and a fixed amount of heap (add more to + * KDB_ENVBUFSIZE if required). + */ + +static char *__env[] = { +#if defined(CONFIG_SMP) + "PROMPT=[%d]kdb> ", + "MOREPROMPT=[%d]more> ", +#else + "PROMPT=kdb> ", + "MOREPROMPT=more> ", +#endif + "RADIX=16", + "MDCOUNT=8", /* lines of md output */ + "BTARGS=9", /* 9 possible args in bt */ + KDB_PLATFORM_ENV, + "DTABCOUNT=30", + "NOSECT=1", + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, + (char *)0, +}; + +static const int __nenv = (sizeof(__env) / sizeof(char *)); + +struct task_struct *kdb_curr_task(int cpu) +{ + struct task_struct *p = curr_task(cpu); +#ifdef _TIF_MCA_INIT + if ((task_thread_info(p)->flags & _TIF_MCA_INIT) && KDB_TSK(cpu)) + p = krp->p; +#endif + return p; +} + +/* + * kdbgetenv - This function will return the character string value of + * an environment variable. + * Parameters: + * match A character string representing an environment variable. + * Returns: + * NULL No environment variable matches 'match' + * char* Pointer to string value of environment variable. + */ +char *kdbgetenv(const char *match) +{ + char **ep = __env; + int matchlen = strlen(match); + int i; + + for (i = 0; i < __nenv; i++) { + char *e = *ep++; + + if (!e) + continue; + + if ((strncmp(match, e, matchlen) == 0) + && ((e[matchlen] == '\0') + || (e[matchlen] == '='))) { + char *cp = strchr(e, '='); + return cp ? ++cp : ""; + } + } + return NULL; +} + +/* + * kdballocenv - This function is used to allocate bytes for + * environment entries. + * Parameters: + * match A character string representing a numeric value + * Outputs: + * *value the unsigned long representation of the env variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + * Remarks: + * We use a static environment buffer (envbuffer) to hold the values + * of dynamically generated environment variables (see kdb_set). Buffer + * space once allocated is never free'd, so over time, the amount of space + * (currently 512 bytes) will be exhausted if env variables are changed + * frequently. + */ +static char *kdballocenv(size_t bytes) +{ +#define KDB_ENVBUFSIZE 512 + static char envbuffer[KDB_ENVBUFSIZE]; + static int envbufsize; + char *ep = NULL; + + if ((KDB_ENVBUFSIZE - envbufsize) >= bytes) { + ep = &envbuffer[envbufsize]; + envbufsize += bytes; + } + return ep; +} + +/* + * kdbgetulenv - This function will return the value of an unsigned + * long-valued environment variable. + * Parameters: + * match A character string representing a numeric value + * Outputs: + * *value the unsigned long represntation of the env variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +static int kdbgetulenv(const char *match, unsigned long *value) +{ + char *ep; + + ep = kdbgetenv(match); + if (!ep) + return KDB_NOTENV; + if (strlen(ep) == 0) + return KDB_NOENVVALUE; + + *value = simple_strtoul(ep, NULL, 0); + + return 0; +} + +/* + * kdbgetintenv - This function will return the value of an + * integer-valued environment variable. + * Parameters: + * match A character string representing an integer-valued env variable + * Outputs: + * *value the integer representation of the environment variable 'match' + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +int kdbgetintenv(const char *match, int *value) +{ + unsigned long val; + int diag; + + diag = kdbgetulenv(match, &val); + if (!diag) + *value = (int) val; + return diag; +} + +/* + * kdbgetularg - This function will convert a numeric string into an + * unsigned long value. + * Parameters: + * arg A character string representing a numeric value + * Outputs: + * *value the unsigned long represntation of arg. + * Returns: + * Zero on success, a kdb diagnostic on failure. + */ +int kdbgetularg(const char *arg, unsigned long *value) +{ + char *endp; + unsigned long val; + + val = simple_strtoul(arg, &endp, 0); + + if (endp == arg) { + /* + * Try base 16, for us folks too lazy to type the + * leading 0x... + */ + val = simple_strtoul(arg, &endp, 16); + if (endp == arg) + return KDB_BADINT; + } + + *value = val; + + return 0; +} + +/* + * kdb_set - This function implements the 'set' command. Alter an + * existing environment variable or create a new one. + */ +int kdb_set(int argc, const char **argv) +{ + int i; + char *ep; + size_t varlen, vallen; + + /* + * we can be invoked two ways: + * set var=value argv[1]="var", argv[2]="value" + * set var = value argv[1]="var", argv[2]="=", argv[3]="value" + * - if the latter, shift 'em down. + */ + if (argc == 3) { + argv[2] = argv[3]; + argc--; + } + + if (argc != 2) + return KDB_ARGCOUNT; + + /* + * Check for internal variables + */ + if (strcmp(argv[1], "KDBDEBUG") == 0) { + unsigned int debugflags; + char *cp; + + debugflags = simple_strtoul(argv[2], &cp, 0); + if (cp == argv[2] || debugflags & ~KDB_DEBUG_FLAG_MASK) { + kdb_printf("kdb: illegal debug flags '%s'\n", + argv[2]); + return 0; + } + kdb_flags = (kdb_flags & + ~(KDB_DEBUG_FLAG_MASK << KDB_DEBUG_FLAG_SHIFT)) + | (debugflags << KDB_DEBUG_FLAG_SHIFT); + + return 0; + } + + /* + * Tokenizer squashed the '=' sign. argv[1] is variable + * name, argv[2] = value. + */ + varlen = strlen(argv[1]); + vallen = strlen(argv[2]); + ep = kdballocenv(varlen + vallen + 2); + if (ep == (char *)0) + return KDB_ENVBUFFULL; + + sprintf(ep, "%s=%s", argv[1], argv[2]); + + ep[varlen+vallen+1] = '\0'; + + for (i = 0; i < __nenv; i++) { + if (__env[i] + && ((strncmp(__env[i], argv[1], varlen) == 0) + && ((__env[i][varlen] == '\0') + || (__env[i][varlen] == '=')))) { + __env[i] = ep; + return 0; + } + } + + /* + * Wasn't existing variable. Fit into slot. + */ + for (i = 0; i < __nenv-1; i++) { + if (__env[i] == (char *)0) { + __env[i] = ep; + return 0; + } + } + + return KDB_ENVFULL; +} + +static int kdb_check_regs(void) +{ + if (!kdb_current_regs) { + kdb_printf("No current kdb registers." + " You may need to select another task\n"); + return KDB_BADREG; + } + return 0; +} + +/* + * kdbgetaddrarg - This function is responsible for parsing an + * address-expression and returning the value of the expression, + * symbol name, and offset to the caller. + * + * The argument may consist of a numeric value (decimal or + * hexidecimal), a symbol name, a register name (preceeded by the + * percent sign), an environment variable with a numeric value + * (preceeded by a dollar sign) or a simple arithmetic expression + * consisting of a symbol name, +/-, and a numeric constant value + * (offset). + * Parameters: + * argc - count of arguments in argv + * argv - argument vector + * *nextarg - index to next unparsed argument in argv[] + * regs - Register state at time of KDB entry + * Outputs: + * *value - receives the value of the address-expression + * *offset - receives the offset specified, if any + * *name - receives the symbol name, if any + * *nextarg - index to next unparsed argument in argv[] + * Returns: + * zero is returned on success, a kdb diagnostic code is + * returned on error. + */ +int kdbgetaddrarg(int argc, const char **argv, int *nextarg, + unsigned long *value, long *offset, + char **name) +{ + unsigned long addr; + unsigned long off = 0; + int positive; + int diag; + int found = 0; + char *symname; + char symbol = '\0'; + char *cp; + kdb_symtab_t symtab; + + /* + * Process arguments which follow the following syntax: + * + * symbol | numeric-address [+/- numeric-offset] + * %register + * $environment-variable + */ + + if (*nextarg > argc) + return KDB_ARGCOUNT; + + symname = (char *)argv[*nextarg]; + + /* + * If there is no whitespace between the symbol + * or address and the '+' or '-' symbols, we + * remember the character and replace it with a + * null so the symbol/value can be properly parsed + */ + cp = strpbrk(symname, "+-"); + if (cp != NULL) { + symbol = *cp; + *cp++ = '\0'; + } + + if (symname[0] == '$') { + diag = kdbgetulenv(&symname[1], &addr); + if (diag) + return diag; + } else if (symname[0] == '%') { + diag = kdb_check_regs(); + if (diag) + return diag; + /* Implement register values with % at a later time as it is + * arch optional. + */ + return KDB_NOTIMP; + } else { + found = kdbgetsymval(symname, &symtab); + if (found) { + addr = symtab.sym_start; + } else { + diag = kdbgetularg(argv[*nextarg], &addr); + if (diag) + return diag; + } + } + + if (!found) + found = kdbnearsym(addr, &symtab); + + (*nextarg)++; + + if (name) + *name = symname; + if (value) + *value = addr; + if (offset && name && *name) + *offset = addr - symtab.sym_start; + + if ((*nextarg > argc) + && (symbol == '\0')) + return 0; + + /* + * check for +/- and offset + */ + + if (symbol == '\0') { + if ((argv[*nextarg][0] != '+') + && (argv[*nextarg][0] != '-')) { + /* + * Not our argument. Return. + */ + return 0; + } else { + positive = (argv[*nextarg][0] == '+'); + (*nextarg)++; + } + } else + positive = (symbol == '+'); + + /* + * Now there must be an offset! + */ + if ((*nextarg > argc) + && (symbol == '\0')) { + return KDB_INVADDRFMT; + } + + if (!symbol) { + cp = (char *)argv[*nextarg]; + (*nextarg)++; + } + + diag = kdbgetularg(cp, &off); + if (diag) + return diag; + + if (!positive) + off = -off; + + if (offset) + *offset += off; + + if (value) + *value += off; + + return 0; +} + +static void kdb_cmderror(int diag) +{ + int i; + + if (diag >= 0) { + kdb_printf("no error detected (diagnostic is %d)\n", diag); + return; + } + + for (i = 0; i < __nkdb_err; i++) { + if (kdbmsgs[i].km_diag == diag) { + kdb_printf("diag: %d: %s\n", diag, kdbmsgs[i].km_msg); + return; + } + } + + kdb_printf("Unknown diag %d\n", -diag); +} + +/* + * kdb_defcmd, kdb_defcmd2 - This function implements the 'defcmd' + * command which defines one command as a set of other commands, + * terminated by endefcmd. kdb_defcmd processes the initial + * 'defcmd' command, kdb_defcmd2 is invoked from kdb_parse for + * the following commands until 'endefcmd'. + * Inputs: + * argc argument count + * argv argument vector + * Returns: + * zero for success, a kdb diagnostic if error + */ +struct defcmd_set { + int count; + int usable; + char *name; + char *usage; + char *help; + char **command; +}; +static struct defcmd_set *defcmd_set; +static int defcmd_set_count; +static int defcmd_in_progress; + +/* Forward references */ +static int kdb_exec_defcmd(int argc, const char **argv); + +static int kdb_defcmd2(const char *cmdstr, const char *argv0) +{ + struct defcmd_set *s = defcmd_set + defcmd_set_count - 1; + char **save_command = s->command; + if (strcmp(argv0, "endefcmd") == 0) { + defcmd_in_progress = 0; + if (!s->count) + s->usable = 0; + if (s->usable) + kdb_register(s->name, kdb_exec_defcmd, + s->usage, s->help, 0); + return 0; + } + if (!s->usable) + return KDB_NOTIMP; + s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB); + if (!s->command) { + kdb_printf("Could not allocate new kdb_defcmd table for %s\n", + cmdstr); + s->usable = 0; + return KDB_NOTIMP; + } + memcpy(s->command, save_command, s->count * sizeof(*(s->command))); + s->command[s->count++] = kdb_strdup(cmdstr, GFP_KDB); + kfree(save_command); + return 0; +} + +static int kdb_defcmd(int argc, const char **argv) +{ + struct defcmd_set *save_defcmd_set = defcmd_set, *s; + if (defcmd_in_progress) { + kdb_printf("kdb: nested defcmd detected, assuming missing " + "endefcmd\n"); + kdb_defcmd2("endefcmd", "endefcmd"); + } + if (argc == 0) { + int i; + for (s = defcmd_set; s < defcmd_set + defcmd_set_count; ++s) { + kdb_printf("defcmd %s \"%s\" \"%s\"\n", s->name, + s->usage, s->help); + for (i = 0; i < s->count; ++i) + kdb_printf("%s", s->command[i]); + kdb_printf("endefcmd\n"); + } + return 0; + } + if (argc != 3) + return KDB_ARGCOUNT; + defcmd_set = kmalloc((defcmd_set_count + 1) * sizeof(*defcmd_set), + GFP_KDB); + if (!defcmd_set) { + kdb_printf("Could not allocate new defcmd_set entry for %s\n", + argv[1]); + defcmd_set = save_defcmd_set; + return KDB_NOTIMP; + } + memcpy(defcmd_set, save_defcmd_set, + defcmd_set_count * sizeof(*defcmd_set)); + kfree(save_defcmd_set); + s = defcmd_set + defcmd_set_count; + memset(s, 0, sizeof(*s)); + s->usable = 1; + s->name = kdb_strdup(argv[1], GFP_KDB); + s->usage = kdb_strdup(argv[2], GFP_KDB); + s->help = kdb_strdup(argv[3], GFP_KDB); + if (s->usage[0] == '"') { + strcpy(s->usage, s->usage+1); + s->usage[strlen(s->usage)-1] = '\0'; + } + if (s->help[0] == '"') { + strcpy(s->help, s->help+1); + s->help[strlen(s->help)-1] = '\0'; + } + ++defcmd_set_count; + defcmd_in_progress = 1; + return 0; +} + +/* + * kdb_exec_defcmd - Execute the set of commands associated with this + * defcmd name. + * Inputs: + * argc argument count + * argv argument vector + * Returns: + * zero for success, a kdb diagnostic if error + */ +static int kdb_exec_defcmd(int argc, const char **argv) +{ + int i, ret; + struct defcmd_set *s; + if (argc != 0) + return KDB_ARGCOUNT; + for (s = defcmd_set, i = 0; i < defcmd_set_count; ++i, ++s) { + if (strcmp(s->name, argv[0]) == 0) + break; + } + if (i == defcmd_set_count) { + kdb_printf("kdb_exec_defcmd: could not find commands for %s\n", + argv[0]); + return KDB_NOTIMP; + } + for (i = 0; i < s->count; ++i) { + /* Recursive use of kdb_parse, do not use argv after + * this point */ + argv = NULL; + kdb_printf("[%s]kdb> %s\n", s->name, s->command[i]); + ret = kdb_parse(s->command[i]); + if (ret) + return ret; + } + return 0; +} + +/* Command history */ +#define KDB_CMD_HISTORY_COUNT 32 +#define CMD_BUFLEN 200 /* kdb_printf: max printline + * size == 256 */ +static unsigned int cmd_head, cmd_tail; +static unsigned int cmdptr; +static char cmd_hist[KDB_CMD_HISTORY_COUNT][CMD_BUFLEN]; +static char cmd_cur[CMD_BUFLEN]; + +/* + * The "str" argument may point to something like | grep xyz + */ +static void parse_grep(const char *str) +{ + int len; + char *cp = (char *)str, *cp2; + + /* sanity check: we should have been called with the \ first */ + if (*cp != '|') + return; + cp++; + while (isspace(*cp)) + cp++; + if (strncmp(cp, "grep ", 5)) { + kdb_printf("invalid 'pipe', see grephelp\n"); + return; + } + cp += 5; + while (isspace(*cp)) + cp++; + cp2 = strchr(cp, '\n'); + if (cp2) + *cp2 = '\0'; /* remove the trailing newline */ + len = strlen(cp); + if (len == 0) { + kdb_printf("invalid 'pipe', see grephelp\n"); + return; + } + /* now cp points to a nonzero length search string */ + if (*cp == '"') { + /* allow it be "x y z" by removing the "'s - there must + be two of them */ + cp++; + cp2 = strchr(cp, '"'); + if (!cp2) { + kdb_printf("invalid quoted string, see grephelp\n"); + return; + } + *cp2 = '\0'; /* end the string where the 2nd " was */ + } + kdb_grep_leading = 0; + if (*cp == '^') { + kdb_grep_leading = 1; + cp++; + } + len = strlen(cp); + kdb_grep_trailing = 0; + if (*(cp+len-1) == '$') { + kdb_grep_trailing = 1; + *(cp+len-1) = '\0'; + } + len = strlen(cp); + if (!len) + return; + if (len >= GREP_LEN) { + kdb_printf("search string too long\n"); + return; + } + strcpy(kdb_grep_string, cp); + kdb_grepping_flag++; + return; +} + +/* + * kdb_parse - Parse the command line, search the command table for a + * matching command and invoke the command function. This + * function may be called recursively, if it is, the second call + * will overwrite argv and cbuf. It is the caller's + * responsibility to save their argv if they recursively call + * kdb_parse(). + * Parameters: + * cmdstr The input command line to be parsed. + * regs The registers at the time kdb was entered. + * Returns: + * Zero for success, a kdb diagnostic if failure. + * Remarks: + * Limited to 20 tokens. + * + * Real rudimentary tokenization. Basically only whitespace + * is considered a token delimeter (but special consideration + * is taken of the '=' sign as used by the 'set' command). + * + * The algorithm used to tokenize the input string relies on + * there being at least one whitespace (or otherwise useless) + * character between tokens as the character immediately following + * the token is altered in-place to a null-byte to terminate the + * token string. + */ + +#define MAXARGC 20 + +int kdb_parse(const char *cmdstr) +{ + static char *argv[MAXARGC]; + static int argc; + static char cbuf[CMD_BUFLEN+2]; + char *cp; + char *cpp, quoted; + kdbtab_t *tp; + int i, escaped, ignore_errors = 0, check_grep; + + /* + * First tokenize the command string. + */ + cp = (char *)cmdstr; + kdb_grepping_flag = check_grep = 0; + + if (KDB_FLAG(CMD_INTERRUPT)) { + /* Previous command was interrupted, newline must not + * repeat the command */ + KDB_FLAG_CLEAR(CMD_INTERRUPT); + KDB_STATE_SET(PAGER); + argc = 0; /* no repeat */ + } + + if (*cp != '\n' && *cp != '\0') { + argc = 0; + cpp = cbuf; + while (*cp) { + /* skip whitespace */ + while (isspace(*cp)) + cp++; + if ((*cp == '\0') || (*cp == '\n') || + (*cp == '#' && !defcmd_in_progress)) + break; + /* special case: check for | grep pattern */ + if (*cp == '|') { + check_grep++; + break; + } + if (cpp >= cbuf + CMD_BUFLEN) { + kdb_printf("kdb_parse: command buffer " + "overflow, command ignored\n%s\n", + cmdstr); + return KDB_NOTFOUND; + } + if (argc >= MAXARGC - 1) { + kdb_printf("kdb_parse: too many arguments, " + "command ignored\n%s\n", cmdstr); + return KDB_NOTFOUND; + } + argv[argc++] = cpp; + escaped = 0; + quoted = '\0'; + /* Copy to next unquoted and unescaped + * whitespace or '=' */ + while (*cp && *cp != '\n' && + (escaped || quoted || !isspace(*cp))) { + if (cpp >= cbuf + CMD_BUFLEN) + break; + if (escaped) { + escaped = 0; + *cpp++ = *cp++; + continue; + } + if (*cp == '\\') { + escaped = 1; + ++cp; + continue; + } + if (*cp == quoted) + quoted = '\0'; + else if (*cp == '\'' || *cp == '"') + quoted = *cp; + *cpp = *cp++; + if (*cpp == '=' && !quoted) + break; + ++cpp; + } + *cpp++ = '\0'; /* Squash a ws or '=' character */ + } + } + if (!argc) + return 0; + if (check_grep) + parse_grep(cp); + if (defcmd_in_progress) { + int result = kdb_defcmd2(cmdstr, argv[0]); + if (!defcmd_in_progress) { + argc = 0; /* avoid repeat on endefcmd */ + *(argv[0]) = '\0'; + } + return result; + } + if (argv[0][0] == '-' && argv[0][1] && + (argv[0][1] < '0' || argv[0][1] > '9')) { + ignore_errors = 1; + ++argv[0]; + } + + for_each_kdbcmd(tp, i) { + if (tp->cmd_name) { + /* + * If this command is allowed to be abbreviated, + * check to see if this is it. + */ + + if (tp->cmd_minlen + && (strlen(argv[0]) <= tp->cmd_minlen)) { + if (strncmp(argv[0], + tp->cmd_name, + tp->cmd_minlen) == 0) { + break; + } + } + + if (strcmp(argv[0], tp->cmd_name) == 0) + break; + } + } + + /* + * If we don't find a command by this name, see if the first + * few characters of this match any of the known commands. + * e.g., md1c20 should match md. + */ + if (i == kdb_max_commands) { + for_each_kdbcmd(tp, i) { + if (tp->cmd_name) { + if (strncmp(argv[0], + tp->cmd_name, + strlen(tp->cmd_name)) == 0) { + break; + } + } + } + } + + if (i < kdb_max_commands) { + int result; + KDB_STATE_SET(CMD); + result = (*tp->cmd_func)(argc-1, (const char **)argv); + if (result && ignore_errors && result > KDB_CMD_GO) + result = 0; + KDB_STATE_CLEAR(CMD); + switch (tp->cmd_repeat) { + case KDB_REPEAT_NONE: + argc = 0; + if (argv[0]) + *(argv[0]) = '\0'; + break; + case KDB_REPEAT_NO_ARGS: + argc = 1; + if (argv[1]) + *(argv[1]) = '\0'; + break; + case KDB_REPEAT_WITH_ARGS: + break; + } + return result; + } + + /* + * If the input with which we were presented does not + * map to an existing command, attempt to parse it as an + * address argument and display the result. Useful for + * obtaining the address of a variable, or the nearest symbol + * to an address contained in a register. + */ + { + unsigned long value; + char *name = NULL; + long offset; + int nextarg = 0; + + if (kdbgetaddrarg(0, (const char **)argv, &nextarg, + &value, &offset, &name)) { + return KDB_NOTFOUND; + } + + kdb_printf("%s = ", argv[0]); + kdb_symbol_print(value, NULL, KDB_SP_DEFAULT); + kdb_printf("\n"); + return 0; + } +} + + +static int handle_ctrl_cmd(char *cmd) +{ +#define CTRL_P 16 +#define CTRL_N 14 + + /* initial situation */ + if (cmd_head == cmd_tail) + return 0; + switch (*cmd) { + case CTRL_P: + if (cmdptr != cmd_tail) + cmdptr = (cmdptr-1) % KDB_CMD_HISTORY_COUNT; + strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN); + return 1; + case CTRL_N: + if (cmdptr != cmd_head) + cmdptr = (cmdptr+1) % KDB_CMD_HISTORY_COUNT; + strncpy(cmd_cur, cmd_hist[cmdptr], CMD_BUFLEN); + return 1; + } + return 0; +} + +/* + * kdb_reboot - This function implements the 'reboot' command. Reboot + * the system immediately, or loop for ever on failure. + */ +static int kdb_reboot(int argc, const char **argv) +{ + emergency_restart(); + kdb_printf("Hmm, kdb_reboot did not reboot, spinning here\n"); + while (1) + cpu_relax(); + /* NOTREACHED */ + return 0; +} + +static void kdb_dumpregs(struct pt_regs *regs) +{ + int old_lvl = console_loglevel; + console_loglevel = 15; + kdb_trap_printk++; + show_regs(regs); + kdb_trap_printk--; + kdb_printf("\n"); + console_loglevel = old_lvl; +} + +void kdb_set_current_task(struct task_struct *p) +{ + kdb_current_task = p; + + if (kdb_task_has_cpu(p)) { + kdb_current_regs = KDB_TSKREGS(kdb_process_cpu(p)); + return; + } + kdb_current_regs = NULL; +} + +/* + * kdb_local - The main code for kdb. This routine is invoked on a + * specific processor, it is not global. The main kdb() routine + * ensures that only one processor at a time is in this routine. + * This code is called with the real reason code on the first + * entry to a kdb session, thereafter it is called with reason + * SWITCH, even if the user goes back to the original cpu. + * Inputs: + * reason The reason KDB was invoked + * error The hardware-defined error code + * regs The exception frame at time of fault/breakpoint. + * db_result Result code from the break or debug point. + * Returns: + * 0 KDB was invoked for an event which it wasn't responsible + * 1 KDB handled the event for which it was invoked. + * KDB_CMD_GO User typed 'go'. + * KDB_CMD_CPU User switched to another cpu. + * KDB_CMD_SS Single step. + * KDB_CMD_SSB Single step until branch. + */ +static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, + kdb_dbtrap_t db_result) +{ + char *cmdbuf; + int diag; + struct task_struct *kdb_current = + kdb_curr_task(raw_smp_processor_id()); + + KDB_DEBUG_STATE("kdb_local 1", reason); + kdb_go_count = 0; + if (reason == KDB_REASON_DEBUG) { + /* special case below */ + } else { + kdb_printf("\nEntering kdb (current=0x%p, pid %d) ", + kdb_current, kdb_current->pid); +#if defined(CONFIG_SMP) + kdb_printf("on processor %d ", raw_smp_processor_id()); +#endif + } + + switch (reason) { + case KDB_REASON_DEBUG: + { + /* + * If re-entering kdb after a single step + * command, don't print the message. + */ + switch (db_result) { + case KDB_DB_BPT: + kdb_printf("\nEntering kdb (0x%p, pid %d) ", + kdb_current, kdb_current->pid); +#if defined(CONFIG_SMP) + kdb_printf("on processor %d ", raw_smp_processor_id()); +#endif + kdb_printf("due to Debug @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + break; + case KDB_DB_SSB: + /* + * In the midst of ssb command. Just return. + */ + KDB_DEBUG_STATE("kdb_local 3", reason); + return KDB_CMD_SSB; /* Continue with SSB command */ + + break; + case KDB_DB_SS: + break; + case KDB_DB_SSBPT: + KDB_DEBUG_STATE("kdb_local 4", reason); + return 1; /* kdba_db_trap did the work */ + default: + kdb_printf("kdb: Bad result from kdba_db_trap: %d\n", + db_result); + break; + } + + } + break; + case KDB_REASON_ENTER: + if (KDB_STATE(KEYBOARD)) + kdb_printf("due to Keyboard Entry\n"); + else + kdb_printf("due to KDB_ENTER()\n"); + break; + case KDB_REASON_KEYBOARD: + KDB_STATE_SET(KEYBOARD); + kdb_printf("due to Keyboard Entry\n"); + break; + case KDB_REASON_ENTER_SLAVE: + /* drop through, slaves only get released via cpu switch */ + case KDB_REASON_SWITCH: + kdb_printf("due to cpu switch\n"); + break; + case KDB_REASON_OOPS: + kdb_printf("Oops: %s\n", kdb_diemsg); + kdb_printf("due to oops @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + kdb_dumpregs(regs); + break; + case KDB_REASON_NMI: + kdb_printf("due to NonMaskable Interrupt @ " + kdb_machreg_fmt "\n", + instruction_pointer(regs)); + kdb_dumpregs(regs); + break; + case KDB_REASON_SSTEP: + case KDB_REASON_BREAK: + kdb_printf("due to %s @ " kdb_machreg_fmt "\n", + reason == KDB_REASON_BREAK ? + "Breakpoint" : "SS trap", instruction_pointer(regs)); + /* + * Determine if this breakpoint is one that we + * are interested in. + */ + if (db_result != KDB_DB_BPT) { + kdb_printf("kdb: error return from kdba_bp_trap: %d\n", + db_result); + KDB_DEBUG_STATE("kdb_local 6", reason); + return 0; /* Not for us, dismiss it */ + } + break; + case KDB_REASON_RECURSE: + kdb_printf("due to Recursion @ " kdb_machreg_fmt "\n", + instruction_pointer(regs)); + break; + default: + kdb_printf("kdb: unexpected reason code: %d\n", reason); + KDB_DEBUG_STATE("kdb_local 8", reason); + return 0; /* Not for us, dismiss it */ + } + + while (1) { + /* + * Initialize pager context. + */ + kdb_nextline = 1; + KDB_STATE_CLEAR(SUPPRESS); + + cmdbuf = cmd_cur; + *cmdbuf = '\0'; + *(cmd_hist[cmd_head]) = '\0'; + + if (KDB_FLAG(ONLY_DO_DUMP)) { + /* kdb is off but a catastrophic error requires a dump. + * Take the dump and reboot. + * Turn on logging so the kdb output appears in the log + * buffer in the dump. + */ + const char *setargs[] = { "set", "LOGGING", "1" }; + kdb_set(2, setargs); + kdb_reboot(0, NULL); + /*NOTREACHED*/ + } + +do_full_getstr: +#if defined(CONFIG_SMP) + snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"), + raw_smp_processor_id()); +#else + snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT")); +#endif + if (defcmd_in_progress) + strncat(kdb_prompt_str, "[defcmd]", CMD_BUFLEN); + + /* + * Fetch command from keyboard + */ + cmdbuf = kdb_getstr(cmdbuf, CMD_BUFLEN, kdb_prompt_str); + if (*cmdbuf != '\n') { + if (*cmdbuf < 32) { + if (cmdptr == cmd_head) { + strncpy(cmd_hist[cmd_head], cmd_cur, + CMD_BUFLEN); + *(cmd_hist[cmd_head] + + strlen(cmd_hist[cmd_head])-1) = '\0'; + } + if (!handle_ctrl_cmd(cmdbuf)) + *(cmd_cur+strlen(cmd_cur)-1) = '\0'; + cmdbuf = cmd_cur; + goto do_full_getstr; + } else { + strncpy(cmd_hist[cmd_head], cmd_cur, + CMD_BUFLEN); + } + + cmd_head = (cmd_head+1) % KDB_CMD_HISTORY_COUNT; + if (cmd_head == cmd_tail) + cmd_tail = (cmd_tail+1) % KDB_CMD_HISTORY_COUNT; + } + + cmdptr = cmd_head; + diag = kdb_parse(cmdbuf); + if (diag == KDB_NOTFOUND) { + kdb_printf("Unknown kdb command: '%s'\n", cmdbuf); + diag = 0; + } + if (diag == KDB_CMD_GO + || diag == KDB_CMD_CPU + || diag == KDB_CMD_SS + || diag == KDB_CMD_SSB + || diag == KDB_CMD_KGDB) + break; + + if (diag) + kdb_cmderror(diag); + } + KDB_DEBUG_STATE("kdb_local 9", diag); + return diag; +} + + +/* + * kdb_print_state - Print the state data for the current processor + * for debugging. + * Inputs: + * text Identifies the debug point + * value Any integer value to be printed, e.g. reason code. + */ +void kdb_print_state(const char *text, int value) +{ + kdb_printf("state: %s cpu %d value %d initial %d state %x\n", + text, raw_smp_processor_id(), value, kdb_initial_cpu, + kdb_state); +} + +/* + * kdb_main_loop - After initial setup and assignment of the + * controlling cpu, all cpus are in this loop. One cpu is in + * control and will issue the kdb prompt, the others will spin + * until 'go' or cpu switch. + * + * To get a consistent view of the kernel stacks for all + * processes, this routine is invoked from the main kdb code via + * an architecture specific routine. kdba_main_loop is + * responsible for making the kernel stacks consistent for all + * processes, there should be no difference between a blocked + * process and a running process as far as kdb is concerned. + * Inputs: + * reason The reason KDB was invoked + * error The hardware-defined error code + * reason2 kdb's current reason code. + * Initially error but can change + * acording to kdb state. + * db_result Result code from break or debug point. + * regs The exception frame at time of fault/breakpoint. + * should always be valid. + * Returns: + * 0 KDB was invoked for an event which it wasn't responsible + * 1 KDB handled the event for which it was invoked. + */ +int kdb_main_loop(kdb_reason_t reason, kdb_reason_t reason2, int error, + kdb_dbtrap_t db_result, struct pt_regs *regs) +{ + int result = 1; + /* Stay in kdb() until 'go', 'ss[b]' or an error */ + while (1) { + /* + * All processors except the one that is in control + * will spin here. + */ + KDB_DEBUG_STATE("kdb_main_loop 1", reason); + while (KDB_STATE(HOLD_CPU)) { + /* state KDB is turned off by kdb_cpu to see if the + * other cpus are still live, each cpu in this loop + * turns it back on. + */ + if (!KDB_STATE(KDB)) + KDB_STATE_SET(KDB); + } + + KDB_STATE_CLEAR(SUPPRESS); + KDB_DEBUG_STATE("kdb_main_loop 2", reason); + if (KDB_STATE(LEAVING)) + break; /* Another cpu said 'go' */ + /* Still using kdb, this processor is in control */ + result = kdb_local(reason2, error, regs, db_result); + KDB_DEBUG_STATE("kdb_main_loop 3", result); + + if (result == KDB_CMD_CPU) + break; + + if (result == KDB_CMD_SS) { + KDB_STATE_SET(DOING_SS); + break; + } + + if (result == KDB_CMD_SSB) { + KDB_STATE_SET(DOING_SS); + KDB_STATE_SET(DOING_SSB); + break; + } + + if (result == KDB_CMD_KGDB) { + if (!(KDB_STATE(DOING_KGDB) || KDB_STATE(DOING_KGDB2))) + kdb_printf("Entering please attach debugger " + "or use $D#44+ or $3#33\n"); + break; + } + if (result && result != 1 && result != KDB_CMD_GO) + kdb_printf("\nUnexpected kdb_local return code %d\n", + result); + KDB_DEBUG_STATE("kdb_main_loop 4", reason); + break; + } + if (KDB_STATE(DOING_SS)) + KDB_STATE_CLEAR(SSBPT); + + return result; +} + +/* + * kdb_mdr - This function implements the guts of the 'mdr', memory + * read command. + * mdr <addr arg>,<byte count> + * Inputs: + * addr Start address + * count Number of bytes + * Returns: + * Always 0. Any errors are detected and printed by kdb_getarea. + */ +static int kdb_mdr(unsigned long addr, unsigned int count) +{ + unsigned char c; + while (count--) { + if (kdb_getarea(c, addr)) + return 0; + kdb_printf("%02x", c); + addr++; + } + kdb_printf("\n"); + return 0; +} + +/* + * kdb_md - This function implements the 'md', 'md1', 'md2', 'md4', + * 'md8' 'mdr' and 'mds' commands. + * + * md|mds [<addr arg> [<line count> [<radix>]]] + * mdWcN [<addr arg> [<line count> [<radix>]]] + * where W = is the width (1, 2, 4 or 8) and N is the count. + * for eg., md1c20 reads 20 bytes, 1 at a time. + * mdr <addr arg>,<byte count> + */ +static void kdb_md_line(const char *fmtstr, unsigned long addr, + int symbolic, int nosect, int bytesperword, + int num, int repeat, int phys) +{ + /* print just one line of data */ + kdb_symtab_t symtab; + char cbuf[32]; + char *c = cbuf; + int i; + unsigned long word; + + memset(cbuf, '\0', sizeof(cbuf)); + if (phys) + kdb_printf("phys " kdb_machreg_fmt0 " ", addr); + else + kdb_printf(kdb_machreg_fmt0 " ", addr); + + for (i = 0; i < num && repeat--; i++) { + if (phys) { + if (kdb_getphysword(&word, addr, bytesperword)) + break; + } else if (kdb_getword(&word, addr, bytesperword)) + break; + kdb_printf(fmtstr, word); + if (symbolic) + kdbnearsym(word, &symtab); + else + memset(&symtab, 0, sizeof(symtab)); + if (symtab.sym_name) { + kdb_symbol_print(word, &symtab, 0); + if (!nosect) { + kdb_printf("\n"); + kdb_printf(" %s %s " + kdb_machreg_fmt " " + kdb_machreg_fmt " " + kdb_machreg_fmt, symtab.mod_name, + symtab.sec_name, symtab.sec_start, + symtab.sym_start, symtab.sym_end); + } + addr += bytesperword; + } else { + union { + u64 word; + unsigned char c[8]; + } wc; + unsigned char *cp; +#ifdef __BIG_ENDIAN + cp = wc.c + 8 - bytesperword; +#else + cp = wc.c; +#endif + wc.word = word; +#define printable_char(c) \ + ({unsigned char __c = c; isascii(__c) && isprint(__c) ? __c : '.'; }) + switch (bytesperword) { + case 8: + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + addr += 4; + case 4: + *c++ = printable_char(*cp++); + *c++ = printable_char(*cp++); + addr += 2; + case 2: + *c++ = printable_char(*cp++); + addr++; + case 1: + *c++ = printable_char(*cp++); + addr++; + break; + } +#undef printable_char + } + } + kdb_printf("%*s %s\n", (int)((num-i)*(2*bytesperword + 1)+1), + " ", cbuf); +} + +static int kdb_md(int argc, const char **argv) +{ + static unsigned long last_addr; + static int last_radix, last_bytesperword, last_repeat; + int radix = 16, mdcount = 8, bytesperword = KDB_WORD_SIZE, repeat; + int nosect = 0; + char fmtchar, fmtstr[64]; + unsigned long addr; + unsigned long word; + long offset = 0; + int symbolic = 0; + int valid = 0; + int phys = 0; + + kdbgetintenv("MDCOUNT", &mdcount); + kdbgetintenv("RADIX", &radix); + kdbgetintenv("BYTESPERWORD", &bytesperword); + + /* Assume 'md <addr>' and start with environment values */ + repeat = mdcount * 16 / bytesperword; + + if (strcmp(argv[0], "mdr") == 0) { + if (argc != 2) + return KDB_ARGCOUNT; + valid = 1; + } else if (isdigit(argv[0][2])) { + bytesperword = (int)(argv[0][2] - '0'); + if (bytesperword == 0) { + bytesperword = last_bytesperword; + if (bytesperword == 0) + bytesperword = 4; + } + last_bytesperword = bytesperword; + repeat = mdcount * 16 / bytesperword; + if (!argv[0][3]) + valid = 1; + else if (argv[0][3] == 'c' && argv[0][4]) { + char *p; + repeat = simple_strtoul(argv[0] + 4, &p, 10); + mdcount = ((repeat * bytesperword) + 15) / 16; + valid = !*p; + } + last_repeat = repeat; + } else if (strcmp(argv[0], "md") == 0) + valid = 1; + else if (strcmp(argv[0], "mds") == 0) + valid = 1; + else if (strcmp(argv[0], "mdp") == 0) { + phys = valid = 1; + } + if (!valid) + return KDB_NOTFOUND; + + if (argc == 0) { + if (last_addr == 0) + return KDB_ARGCOUNT; + addr = last_addr; + radix = last_radix; + bytesperword = last_bytesperword; + repeat = last_repeat; + mdcount = ((repeat * bytesperword) + 15) / 16; + } + + if (argc) { + unsigned long val; + int diag, nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, + &offset, NULL); + if (diag) + return diag; + if (argc > nextarg+2) + return KDB_ARGCOUNT; + + if (argc >= nextarg) { + diag = kdbgetularg(argv[nextarg], &val); + if (!diag) { + mdcount = (int) val; + repeat = mdcount * 16 / bytesperword; + } + } + if (argc >= nextarg+1) { + diag = kdbgetularg(argv[nextarg+1], &val); + if (!diag) + radix = (int) val; + } + } + + if (strcmp(argv[0], "mdr") == 0) + return kdb_mdr(addr, mdcount); + + switch (radix) { + case 10: + fmtchar = 'd'; + break; + case 16: + fmtchar = 'x'; + break; + case 8: + fmtchar = 'o'; + break; + default: + return KDB_BADRADIX; + } + + last_radix = radix; + + if (bytesperword > KDB_WORD_SIZE) + return KDB_BADWIDTH; + + switch (bytesperword) { + case 8: + sprintf(fmtstr, "%%16.16l%c ", fmtchar); + break; + case 4: + sprintf(fmtstr, "%%8.8l%c ", fmtchar); + break; + case 2: + sprintf(fmtstr, "%%4.4l%c ", fmtchar); + break; + case 1: + sprintf(fmtstr, "%%2.2l%c ", fmtchar); + break; + default: + return KDB_BADWIDTH; + } + + last_repeat = repeat; + last_bytesperword = bytesperword; + + if (strcmp(argv[0], "mds") == 0) { + symbolic = 1; + /* Do not save these changes as last_*, they are temporary mds + * overrides. + */ + bytesperword = KDB_WORD_SIZE; + repeat = mdcount; + kdbgetintenv("NOSECT", &nosect); + } + + /* Round address down modulo BYTESPERWORD */ + + addr &= ~(bytesperword-1); + + while (repeat > 0) { + unsigned long a; + int n, z, num = (symbolic ? 1 : (16 / bytesperword)); + + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + for (a = addr, z = 0; z < repeat; a += bytesperword, ++z) { + if (phys) { + if (kdb_getphysword(&word, a, bytesperword) + || word) + break; + } else if (kdb_getword(&word, a, bytesperword) || word) + break; + } + n = min(num, repeat); + kdb_md_line(fmtstr, addr, symbolic, nosect, bytesperword, + num, repeat, phys); + addr += bytesperword * n; + repeat -= n; + z = (z + num - 1) / num; + if (z > 2) { + int s = num * (z-2); + kdb_printf(kdb_machreg_fmt0 "-" kdb_machreg_fmt0 + " zero suppressed\n", + addr, addr + bytesperword * s - 1); + addr += bytesperword * s; + repeat -= s; + } + } + last_addr = addr; + + return 0; +} + +/* + * kdb_mm - This function implements the 'mm' command. + * mm address-expression new-value + * Remarks: + * mm works on machine words, mmW works on bytes. + */ +static int kdb_mm(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset = 0; + unsigned long contents; + int nextarg; + int width; + + if (argv[0][2] && !isdigit(argv[0][2])) + return KDB_NOTFOUND; + + if (argc < 2) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + + if (nextarg > argc) + return KDB_ARGCOUNT; + diag = kdbgetaddrarg(argc, argv, &nextarg, &contents, NULL, NULL); + if (diag) + return diag; + + if (nextarg != argc + 1) + return KDB_ARGCOUNT; + + width = argv[0][2] ? (argv[0][2] - '0') : (KDB_WORD_SIZE); + diag = kdb_putword(addr, contents, width); + if (diag) + return diag; + + kdb_printf(kdb_machreg_fmt " = " kdb_machreg_fmt "\n", addr, contents); + + return 0; +} + +/* + * kdb_go - This function implements the 'go' command. + * go [address-expression] + */ +static int kdb_go(int argc, const char **argv) +{ + unsigned long addr; + int diag; + int nextarg; + long offset; + + if (argc == 1) { + if (raw_smp_processor_id() != kdb_initial_cpu) { + kdb_printf("go <address> must be issued from the " + "initial cpu, do cpu %d first\n", + kdb_initial_cpu); + return KDB_ARGCOUNT; + } + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, + &addr, &offset, NULL); + if (diag) + return diag; + } else if (argc) { + return KDB_ARGCOUNT; + } + + diag = KDB_CMD_GO; + if (KDB_FLAG(CATASTROPHIC)) { + kdb_printf("Catastrophic error detected\n"); + kdb_printf("kdb_continue_catastrophic=%d, ", + kdb_continue_catastrophic); + if (kdb_continue_catastrophic == 0 && kdb_go_count++ == 0) { + kdb_printf("type go a second time if you really want " + "to continue\n"); + return 0; + } + if (kdb_continue_catastrophic == 2) { + kdb_printf("forcing reboot\n"); + kdb_reboot(0, NULL); + } + kdb_printf("attempting to continue\n"); + } + return diag; +} + +/* + * kdb_rd - This function implements the 'rd' command. + */ +static int kdb_rd(int argc, const char **argv) +{ + int diag = kdb_check_regs(); + if (diag) + return diag; + + kdb_dumpregs(kdb_current_regs); + return 0; +} + +/* + * kdb_rm - This function implements the 'rm' (register modify) command. + * rm register-name new-contents + * Remarks: + * Currently doesn't allow modification of control or + * debug registers. + */ +static int kdb_rm(int argc, const char **argv) +{ + int diag; + int ind = 0; + unsigned long contents; + + if (argc != 2) + return KDB_ARGCOUNT; + /* + * Allow presence or absence of leading '%' symbol. + */ + if (argv[1][0] == '%') + ind = 1; + + diag = kdbgetularg(argv[2], &contents); + if (diag) + return diag; + + diag = kdb_check_regs(); + if (diag) + return diag; + kdb_printf("ERROR: Register set currently not implemented\n"); + return 0; +} + +#if defined(CONFIG_MAGIC_SYSRQ) +/* + * kdb_sr - This function implements the 'sr' (SYSRQ key) command + * which interfaces to the soi-disant MAGIC SYSRQ functionality. + * sr <magic-sysrq-code> + */ +static int kdb_sr(int argc, const char **argv) +{ + if (argc != 1) + return KDB_ARGCOUNT; + sysrq_toggle_support(1); + kdb_trap_printk++; + handle_sysrq(*argv[1], NULL); + kdb_trap_printk--; + + return 0; +} +#endif /* CONFIG_MAGIC_SYSRQ */ + +/* + * kdb_ef - This function implements the 'regs' (display exception + * frame) command. This command takes an address and expects to + * find an exception frame at that address, formats and prints + * it. + * regs address-expression + * Remarks: + * Not done yet. + */ +static int kdb_ef(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset; + int nextarg; + + if (argc != 1) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + show_regs((struct pt_regs *)addr); + return 0; +} + +#if defined(CONFIG_MODULES) +/* modules using other modules */ +struct module_use { + struct list_head list; + struct module *module_which_uses; +}; + +/* + * kdb_lsmod - This function implements the 'lsmod' command. Lists + * currently loaded kernel modules. + * Mostly taken from userland lsmod. + */ +static int kdb_lsmod(int argc, const char **argv) +{ + struct module *mod; + + if (argc != 0) + return KDB_ARGCOUNT; + + kdb_printf("Module Size modstruct Used by\n"); + list_for_each_entry(mod, kdb_modules, list) { + + kdb_printf("%-20s%8u 0x%p ", mod->name, + mod->core_size, (void *)mod); +#ifdef CONFIG_MODULE_UNLOAD + kdb_printf("%4d ", module_refcount(mod)); +#endif + if (mod->state == MODULE_STATE_GOING) + kdb_printf(" (Unloading)"); + else if (mod->state == MODULE_STATE_COMING) + kdb_printf(" (Loading)"); + else + kdb_printf(" (Live)"); + +#ifdef CONFIG_MODULE_UNLOAD + { + struct module_use *use; + kdb_printf(" [ "); + list_for_each_entry(use, &mod->modules_which_use_me, + list) + kdb_printf("%s ", use->module_which_uses->name); + kdb_printf("]\n"); + } +#endif + } + + return 0; +} + +#endif /* CONFIG_MODULES */ + +/* + * kdb_env - This function implements the 'env' command. Display the + * current environment variables. + */ + +static int kdb_env(int argc, const char **argv) +{ + int i; + + for (i = 0; i < __nenv; i++) { + if (__env[i]) + kdb_printf("%s\n", __env[i]); + } + + if (KDB_DEBUG(MASK)) + kdb_printf("KDBFLAGS=0x%x\n", kdb_flags); + + return 0; +} + +#ifdef CONFIG_PRINTK +/* + * kdb_dmesg - This function implements the 'dmesg' command to display + * the contents of the syslog buffer. + * dmesg [lines] [adjust] + */ +static int kdb_dmesg(int argc, const char **argv) +{ + char *syslog_data[4], *start, *end, c = '\0', *p; + int diag, logging, logsize, lines = 0, adjust = 0, n; + + if (argc > 2) + return KDB_ARGCOUNT; + if (argc) { + char *cp; + lines = simple_strtol(argv[1], &cp, 0); + if (*cp) + lines = 0; + if (argc > 1) { + adjust = simple_strtoul(argv[2], &cp, 0); + if (*cp || adjust < 0) + adjust = 0; + } + } + + /* disable LOGGING if set */ + diag = kdbgetintenv("LOGGING", &logging); + if (!diag && logging) { + const char *setargs[] = { "set", "LOGGING", "0" }; + kdb_set(2, setargs); + } + + /* syslog_data[0,1] physical start, end+1. syslog_data[2,3] + * logical start, end+1. */ + kdb_syslog_data(syslog_data); + if (syslog_data[2] == syslog_data[3]) + return 0; + logsize = syslog_data[1] - syslog_data[0]; + start = syslog_data[2]; + end = syslog_data[3]; +#define KDB_WRAP(p) (((p - syslog_data[0]) % logsize) + syslog_data[0]) + for (n = 0, p = start; p < end; ++p) { + c = *KDB_WRAP(p); + if (c == '\n') + ++n; + } + if (c != '\n') + ++n; + if (lines < 0) { + if (adjust >= n) + kdb_printf("buffer only contains %d lines, nothing " + "printed\n", n); + else if (adjust - lines >= n) + kdb_printf("buffer only contains %d lines, last %d " + "lines printed\n", n, n - adjust); + if (adjust) { + for (; start < end && adjust; ++start) { + if (*KDB_WRAP(start) == '\n') + --adjust; + } + if (start < end) + ++start; + } + for (p = start; p < end && lines; ++p) { + if (*KDB_WRAP(p) == '\n') + ++lines; + } + end = p; + } else if (lines > 0) { + int skip = n - (adjust + lines); + if (adjust >= n) { + kdb_printf("buffer only contains %d lines, " + "nothing printed\n", n); + skip = n; + } else if (skip < 0) { + lines += skip; + skip = 0; + kdb_printf("buffer only contains %d lines, first " + "%d lines printed\n", n, lines); + } + for (; start < end && skip; ++start) { + if (*KDB_WRAP(start) == '\n') + --skip; + } + for (p = start; p < end && lines; ++p) { + if (*KDB_WRAP(p) == '\n') + --lines; + } + end = p; + } + /* Do a line at a time (max 200 chars) to reduce protocol overhead */ + c = '\n'; + while (start != end) { + char buf[201]; + p = buf; + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + while (start < end && (c = *KDB_WRAP(start)) && + (p - buf) < sizeof(buf)-1) { + ++start; + *p++ = c; + if (c == '\n') + break; + } + *p = '\0'; + kdb_printf("%s", buf); + } + if (c != '\n') + kdb_printf("\n"); + + return 0; +} +#endif /* CONFIG_PRINTK */ +/* + * kdb_cpu - This function implements the 'cpu' command. + * cpu [<cpunum>] + * Returns: + * KDB_CMD_CPU for success, a kdb diagnostic if error + */ +static void kdb_cpu_status(void) +{ + int i, start_cpu, first_print = 1; + char state, prev_state = '?'; + + kdb_printf("Currently on cpu %d\n", raw_smp_processor_id()); + kdb_printf("Available cpus: "); + for (start_cpu = -1, i = 0; i < NR_CPUS; i++) { + if (!cpu_online(i)) { + state = 'F'; /* cpu is offline */ + } else { + state = ' '; /* cpu is responding to kdb */ + if (kdb_task_state_char(KDB_TSK(i)) == 'I') + state = 'I'; /* idle task */ + } + if (state != prev_state) { + if (prev_state != '?') { + if (!first_print) + kdb_printf(", "); + first_print = 0; + kdb_printf("%d", start_cpu); + if (start_cpu < i-1) + kdb_printf("-%d", i-1); + if (prev_state != ' ') + kdb_printf("(%c)", prev_state); + } + prev_state = state; + start_cpu = i; + } + } + /* print the trailing cpus, ignoring them if they are all offline */ + if (prev_state != 'F') { + if (!first_print) + kdb_printf(", "); + kdb_printf("%d", start_cpu); + if (start_cpu < i-1) + kdb_printf("-%d", i-1); + if (prev_state != ' ') + kdb_printf("(%c)", prev_state); + } + kdb_printf("\n"); +} + +static int kdb_cpu(int argc, const char **argv) +{ + unsigned long cpunum; + int diag; + + if (argc == 0) { + kdb_cpu_status(); + return 0; + } + + if (argc != 1) + return KDB_ARGCOUNT; + + diag = kdbgetularg(argv[1], &cpunum); + if (diag) + return diag; + + /* + * Validate cpunum + */ + if ((cpunum > NR_CPUS) || !cpu_online(cpunum)) + return KDB_BADCPUNUM; + + dbg_switch_cpu = cpunum; + + /* + * Switch to other cpu + */ + return KDB_CMD_CPU; +} + +/* The user may not realize that ps/bta with no parameters does not print idle + * or sleeping system daemon processes, so tell them how many were suppressed. + */ +void kdb_ps_suppressed(void) +{ + int idle = 0, daemon = 0; + unsigned long mask_I = kdb_task_state_string("I"), + mask_M = kdb_task_state_string("M"); + unsigned long cpu; + const struct task_struct *p, *g; + for_each_online_cpu(cpu) { + p = kdb_curr_task(cpu); + if (kdb_task_state(p, mask_I)) + ++idle; + } + kdb_do_each_thread(g, p) { + if (kdb_task_state(p, mask_M)) + ++daemon; + } kdb_while_each_thread(g, p); + if (idle || daemon) { + if (idle) + kdb_printf("%d idle process%s (state I)%s\n", + idle, idle == 1 ? "" : "es", + daemon ? " and " : ""); + if (daemon) + kdb_printf("%d sleeping system daemon (state M) " + "process%s", daemon, + daemon == 1 ? "" : "es"); + kdb_printf(" suppressed,\nuse 'ps A' to see all.\n"); + } +} + +/* + * kdb_ps - This function implements the 'ps' command which shows a + * list of the active processes. + * ps [DRSTCZEUIMA] All processes, optionally filtered by state + */ +void kdb_ps1(const struct task_struct *p) +{ + int cpu; + unsigned long tmp; + + if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long))) + return; + + cpu = kdb_process_cpu(p); + kdb_printf("0x%p %8d %8d %d %4d %c 0x%p %c%s\n", + (void *)p, p->pid, p->parent->pid, + kdb_task_has_cpu(p), kdb_process_cpu(p), + kdb_task_state_char(p), + (void *)(&p->thread), + p == kdb_curr_task(raw_smp_processor_id()) ? '*' : ' ', + p->comm); + if (kdb_task_has_cpu(p)) { + if (!KDB_TSK(cpu)) { + kdb_printf(" Error: no saved data for this cpu\n"); + } else { + if (KDB_TSK(cpu) != p) + kdb_printf(" Error: does not match running " + "process table (0x%p)\n", KDB_TSK(cpu)); + } + } +} + +static int kdb_ps(int argc, const char **argv) +{ + struct task_struct *g, *p; + unsigned long mask, cpu; + + if (argc == 0) + kdb_ps_suppressed(); + kdb_printf("%-*s Pid Parent [*] cpu State %-*s Command\n", + (int)(2*sizeof(void *))+2, "Task Addr", + (int)(2*sizeof(void *))+2, "Thread"); + mask = kdb_task_state_string(argc ? argv[1] : NULL); + /* Run the active tasks first */ + for_each_online_cpu(cpu) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + p = kdb_curr_task(cpu); + if (kdb_task_state(p, mask)) + kdb_ps1(p); + } + kdb_printf("\n"); + /* Now the real tasks */ + kdb_do_each_thread(g, p) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + if (kdb_task_state(p, mask)) + kdb_ps1(p); + } kdb_while_each_thread(g, p); + + return 0; +} + +/* + * kdb_pid - This function implements the 'pid' command which switches + * the currently active process. + * pid [<pid> | R] + */ +static int kdb_pid(int argc, const char **argv) +{ + struct task_struct *p; + unsigned long val; + int diag; + + if (argc > 1) + return KDB_ARGCOUNT; + + if (argc) { + if (strcmp(argv[1], "R") == 0) { + p = KDB_TSK(kdb_initial_cpu); + } else { + diag = kdbgetularg(argv[1], &val); + if (diag) + return KDB_BADINT; + + p = find_task_by_pid_ns((pid_t)val, &init_pid_ns); + if (!p) { + kdb_printf("No task with pid=%d\n", (pid_t)val); + return 0; + } + } + kdb_set_current_task(p); + } + kdb_printf("KDB current process is %s(pid=%d)\n", + kdb_current_task->comm, + kdb_current_task->pid); + + return 0; +} + +/* + * kdb_ll - This function implements the 'll' command which follows a + * linked list and executes an arbitrary command for each + * element. + */ +static int kdb_ll(int argc, const char **argv) +{ + int diag; + unsigned long addr; + long offset = 0; + unsigned long va; + unsigned long linkoffset; + int nextarg; + const char *command; + + if (argc != 3) + return KDB_ARGCOUNT; + + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, &offset, NULL); + if (diag) + return diag; + + diag = kdbgetularg(argv[2], &linkoffset); + if (diag) + return diag; + + /* + * Using the starting address as + * the first element in the list, and assuming that + * the list ends with a null pointer. + */ + + va = addr; + command = kdb_strdup(argv[3], GFP_KDB); + if (!command) { + kdb_printf("%s: cannot duplicate command\n", __func__); + return 0; + } + /* Recursive use of kdb_parse, do not use argv after this point */ + argv = NULL; + + while (va) { + char buf[80]; + + sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va); + diag = kdb_parse(buf); + if (diag) + return diag; + + addr = va + linkoffset; + if (kdb_getword(&va, addr, sizeof(va))) + return 0; + } + kfree(command); + + return 0; +} + +static int kdb_kgdb(int argc, const char **argv) +{ + return KDB_CMD_KGDB; +} + +/* + * kdb_help - This function implements the 'help' and '?' commands. + */ +static int kdb_help(int argc, const char **argv) +{ + kdbtab_t *kt; + int i; + + kdb_printf("%-15.15s %-20.20s %s\n", "Command", "Usage", "Description"); + kdb_printf("-----------------------------" + "-----------------------------\n"); + for_each_kdbcmd(kt, i) { + if (kt->cmd_name) + kdb_printf("%-15.15s %-20.20s %s\n", kt->cmd_name, + kt->cmd_usage, kt->cmd_help); + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + } + return 0; +} + +/* + * kdb_kill - This function implements the 'kill' commands. + */ +static int kdb_kill(int argc, const char **argv) +{ + long sig, pid; + char *endp; + struct task_struct *p; + struct siginfo info; + + if (argc != 2) + return KDB_ARGCOUNT; + + sig = simple_strtol(argv[1], &endp, 0); + if (*endp) + return KDB_BADINT; + if (sig >= 0) { + kdb_printf("Invalid signal parameter.<-signal>\n"); + return 0; + } + sig = -sig; + + pid = simple_strtol(argv[2], &endp, 0); + if (*endp) + return KDB_BADINT; + if (pid <= 0) { + kdb_printf("Process ID must be large than 0.\n"); + return 0; + } + + /* Find the process. */ + p = find_task_by_pid_ns(pid, &init_pid_ns); + if (!p) { + kdb_printf("The specified process isn't found.\n"); + return 0; + } + p = p->group_leader; + info.si_signo = sig; + info.si_errno = 0; + info.si_code = SI_USER; + info.si_pid = pid; /* same capabilities as process being signalled */ + info.si_uid = 0; /* kdb has root authority */ + kdb_send_sig_info(p, &info); + return 0; +} + +struct kdb_tm { + int tm_sec; /* seconds */ + int tm_min; /* minutes */ + int tm_hour; /* hours */ + int tm_mday; /* day of the month */ + int tm_mon; /* month */ + int tm_year; /* year */ +}; + +static void kdb_gmtime(struct timespec *tv, struct kdb_tm *tm) +{ + /* This will work from 1970-2099, 2100 is not a leap year */ + static int mon_day[] = { 31, 29, 31, 30, 31, 30, 31, + 31, 30, 31, 30, 31 }; + memset(tm, 0, sizeof(*tm)); + tm->tm_sec = tv->tv_sec % (24 * 60 * 60); + tm->tm_mday = tv->tv_sec / (24 * 60 * 60) + + (2 * 365 + 1); /* shift base from 1970 to 1968 */ + tm->tm_min = tm->tm_sec / 60 % 60; + tm->tm_hour = tm->tm_sec / 60 / 60; + tm->tm_sec = tm->tm_sec % 60; + tm->tm_year = 68 + 4*(tm->tm_mday / (4*365+1)); + tm->tm_mday %= (4*365+1); + mon_day[1] = 29; + while (tm->tm_mday >= mon_day[tm->tm_mon]) { + tm->tm_mday -= mon_day[tm->tm_mon]; + if (++tm->tm_mon == 12) { + tm->tm_mon = 0; + ++tm->tm_year; + mon_day[1] = 28; + } + } + ++tm->tm_mday; +} + +/* + * Most of this code has been lifted from kernel/timer.c::sys_sysinfo(). + * I cannot call that code directly from kdb, it has an unconditional + * cli()/sti() and calls routines that take locks which can stop the debugger. + */ +static void kdb_sysinfo(struct sysinfo *val) +{ + struct timespec uptime; + do_posix_clock_monotonic_gettime(&uptime); + memset(val, 0, sizeof(*val)); + val->uptime = uptime.tv_sec; + val->loads[0] = avenrun[0]; + val->loads[1] = avenrun[1]; + val->loads[2] = avenrun[2]; + val->procs = nr_threads-1; + si_meminfo(val); + + return; +} + +/* + * kdb_summary - This function implements the 'summary' command. + */ +static int kdb_summary(int argc, const char **argv) +{ + struct kdb_tm tm; + struct sysinfo val; + + if (argc) + return KDB_ARGCOUNT; + + kdb_printf("sysname %s\n", init_uts_ns.name.sysname); + kdb_printf("release %s\n", init_uts_ns.name.release); + kdb_printf("version %s\n", init_uts_ns.name.version); + kdb_printf("machine %s\n", init_uts_ns.name.machine); + kdb_printf("nodename %s\n", init_uts_ns.name.nodename); + kdb_printf("domainname %s\n", init_uts_ns.name.domainname); + kdb_printf("ccversion %s\n", __stringify(CCVERSION)); + + kdb_gmtime(&xtime, &tm); + kdb_printf("date %04d-%02d-%02d %02d:%02d:%02d " + "tz_minuteswest %d\n", + 1900+tm.tm_year, tm.tm_mon+1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec, + sys_tz.tz_minuteswest); + + kdb_sysinfo(&val); + kdb_printf("uptime "); + if (val.uptime > (24*60*60)) { + int days = val.uptime / (24*60*60); + val.uptime %= (24*60*60); + kdb_printf("%d day%s ", days, days == 1 ? "" : "s"); + } + kdb_printf("%02ld:%02ld\n", val.uptime/(60*60), (val.uptime/60)%60); + + /* lifted from fs/proc/proc_misc.c::loadavg_read_proc() */ + +#define LOAD_INT(x) ((x) >> FSHIFT) +#define LOAD_FRAC(x) LOAD_INT(((x) & (FIXED_1-1)) * 100) + kdb_printf("load avg %ld.%02ld %ld.%02ld %ld.%02ld\n", + LOAD_INT(val.loads[0]), LOAD_FRAC(val.loads[0]), + LOAD_INT(val.loads[1]), LOAD_FRAC(val.loads[1]), + LOAD_INT(val.loads[2]), LOAD_FRAC(val.loads[2])); +#undef LOAD_INT +#undef LOAD_FRAC + /* Display in kilobytes */ +#define K(x) ((x) << (PAGE_SHIFT - 10)) + kdb_printf("\nMemTotal: %8lu kB\nMemFree: %8lu kB\n" + "Buffers: %8lu kB\n", + val.totalram, val.freeram, val.bufferram); + return 0; +} + +/* + * kdb_per_cpu - This function implements the 'per_cpu' command. + */ +static int kdb_per_cpu(int argc, const char **argv) +{ + char buf[256], fmtstr[64]; + kdb_symtab_t symtab; + cpumask_t suppress = CPU_MASK_NONE; + int cpu, diag; + unsigned long addr, val, bytesperword = 0, whichcpu = ~0UL; + + if (argc < 1 || argc > 3) + return KDB_ARGCOUNT; + + snprintf(buf, sizeof(buf), "per_cpu__%s", argv[1]); + if (!kdbgetsymval(buf, &symtab)) { + kdb_printf("%s is not a per_cpu variable\n", argv[1]); + return KDB_BADADDR; + } + if (argc >= 2) { + diag = kdbgetularg(argv[2], &bytesperword); + if (diag) + return diag; + } + if (!bytesperword) + bytesperword = KDB_WORD_SIZE; + else if (bytesperword > KDB_WORD_SIZE) + return KDB_BADWIDTH; + sprintf(fmtstr, "%%0%dlx ", (int)(2*bytesperword)); + if (argc >= 3) { + diag = kdbgetularg(argv[3], &whichcpu); + if (diag) + return diag; + if (!cpu_online(whichcpu)) { + kdb_printf("cpu %ld is not online\n", whichcpu); + return KDB_BADCPUNUM; + } + } + + /* Most architectures use __per_cpu_offset[cpu], some use + * __per_cpu_offset(cpu), smp has no __per_cpu_offset. + */ +#ifdef __per_cpu_offset +#define KDB_PCU(cpu) __per_cpu_offset(cpu) +#else +#ifdef CONFIG_SMP +#define KDB_PCU(cpu) __per_cpu_offset[cpu] +#else +#define KDB_PCU(cpu) 0 +#endif +#endif + + for_each_online_cpu(cpu) { + if (whichcpu != ~0UL && whichcpu != cpu) + continue; + addr = symtab.sym_start + KDB_PCU(cpu); + diag = kdb_getword(&val, addr, bytesperword); + if (diag) { + kdb_printf("%5d " kdb_bfd_vma_fmt0 " - unable to " + "read, diag=%d\n", cpu, addr, diag); + continue; + } +#ifdef CONFIG_SMP + if (!val) { + cpu_set(cpu, suppress); + continue; + } +#endif /* CONFIG_SMP */ + kdb_printf("%5d ", cpu); + kdb_md_line(fmtstr, addr, + bytesperword == KDB_WORD_SIZE, + 1, bytesperword, 1, 1, 0); + } + if (cpus_weight(suppress) == 0) + return 0; + kdb_printf("Zero suppressed cpu(s):"); + for (cpu = first_cpu(suppress); cpu < num_possible_cpus(); + cpu = next_cpu(cpu, suppress)) { + kdb_printf(" %d", cpu); + if (cpu == num_possible_cpus() - 1 || + next_cpu(cpu, suppress) != cpu + 1) + continue; + while (cpu < num_possible_cpus() && + next_cpu(cpu, suppress) == cpu + 1) + ++cpu; + kdb_printf("-%d", cpu); + } + kdb_printf("\n"); + +#undef KDB_PCU + + return 0; +} + +/* + * display help for the use of cmd | grep pattern + */ +static int kdb_grep_help(int argc, const char **argv) +{ + kdb_printf("Usage of cmd args | grep pattern:\n"); + kdb_printf(" Any command's output may be filtered through an "); + kdb_printf("emulated 'pipe'.\n"); + kdb_printf(" 'grep' is just a key word.\n"); + kdb_printf(" The pattern may include a very limited set of " + "metacharacters:\n"); + kdb_printf(" pattern or ^pattern or pattern$ or ^pattern$\n"); + kdb_printf(" And if there are spaces in the pattern, you may " + "quote it:\n"); + kdb_printf(" \"pat tern\" or \"^pat tern\" or \"pat tern$\"" + " or \"^pat tern$\"\n"); + return 0; +} + +/* + * kdb_register_repeat - This function is used to register a kernel + * debugger command. + * Inputs: + * cmd Command name + * func Function to execute the command + * usage A simple usage string showing arguments + * help A simple help string describing command + * repeat Does the command auto repeat on enter? + * Returns: + * zero for success, one if a duplicate command. + */ +#define kdb_command_extend 50 /* arbitrary */ +int kdb_register_repeat(char *cmd, + kdb_func_t func, + char *usage, + char *help, + short minlen, + kdb_repeat_t repeat) +{ + int i; + kdbtab_t *kp; + + /* + * Brute force method to determine duplicates + */ + for_each_kdbcmd(kp, i) { + if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { + kdb_printf("Duplicate kdb command registered: " + "%s, func %p help %s\n", cmd, func, help); + return 1; + } + } + + /* + * Insert command into first available location in table + */ + for_each_kdbcmd(kp, i) { + if (kp->cmd_name == NULL) + break; + } + + if (i >= kdb_max_commands) { + kdbtab_t *new = kmalloc((kdb_max_commands - KDB_BASE_CMD_MAX + + kdb_command_extend) * sizeof(*new), GFP_KDB); + if (!new) { + kdb_printf("Could not allocate new kdb_command " + "table\n"); + return 1; + } + if (kdb_commands) { + memcpy(new, kdb_commands, + kdb_max_commands * sizeof(*new)); + kfree(kdb_commands); + } + memset(new + kdb_max_commands, 0, + kdb_command_extend * sizeof(*new)); + kdb_commands = new; + kp = kdb_commands + kdb_max_commands; + kdb_max_commands += kdb_command_extend; + } + + kp->cmd_name = cmd; + kp->cmd_func = func; + kp->cmd_usage = usage; + kp->cmd_help = help; + kp->cmd_flags = 0; + kp->cmd_minlen = minlen; + kp->cmd_repeat = repeat; + + return 0; +} + +/* + * kdb_register - Compatibility register function for commands that do + * not need to specify a repeat state. Equivalent to + * kdb_register_repeat with KDB_REPEAT_NONE. + * Inputs: + * cmd Command name + * func Function to execute the command + * usage A simple usage string showing arguments + * help A simple help string describing command + * Returns: + * zero for success, one if a duplicate command. + */ +int kdb_register(char *cmd, + kdb_func_t func, + char *usage, + char *help, + short minlen) +{ + return kdb_register_repeat(cmd, func, usage, help, minlen, + KDB_REPEAT_NONE); +} + +/* + * kdb_unregister - This function is used to unregister a kernel + * debugger command. It is generally called when a module which + * implements kdb commands is unloaded. + * Inputs: + * cmd Command name + * Returns: + * zero for success, one command not registered. + */ +int kdb_unregister(char *cmd) +{ + int i; + kdbtab_t *kp; + + /* + * find the command. + */ + for (i = 0, kp = kdb_commands; i < kdb_max_commands; i++, kp++) { + if (kp->cmd_name && (strcmp(kp->cmd_name, cmd) == 0)) { + kp->cmd_name = NULL; + return 0; + } + } + + /* Couldn't find it. */ + return 1; +} + +/* Initialize the kdb command table. */ +static void __init kdb_inittab(void) +{ + int i; + kdbtab_t *kp; + + for_each_kdbcmd(kp, i) + kp->cmd_name = NULL; + + kdb_register_repeat("md", kdb_md, "<vaddr>", + "Display Memory Contents, also mdWcN, e.g. md8c1", 1, + KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mdr", kdb_md, "<vaddr> <bytes>", + "Display Raw Memory", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mdp", kdb_md, "<paddr> <bytes>", + "Display Physical Memory", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mds", kdb_md, "<vaddr>", + "Display Memory Symbolically", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("mm", kdb_mm, "<vaddr> <contents>", + "Modify Memory Contents", 0, KDB_REPEAT_NO_ARGS); + kdb_register_repeat("go", kdb_go, "[<vaddr>]", + "Continue Execution", 1, KDB_REPEAT_NONE); + kdb_register_repeat("rd", kdb_rd, "", + "Display Registers", 0, KDB_REPEAT_NONE); + kdb_register_repeat("rm", kdb_rm, "<reg> <contents>", + "Modify Registers", 0, KDB_REPEAT_NONE); + kdb_register_repeat("ef", kdb_ef, "<vaddr>", + "Display exception frame", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bt", kdb_bt, "[<vaddr>]", + "Stack traceback", 1, KDB_REPEAT_NONE); + kdb_register_repeat("btp", kdb_bt, "<pid>", + "Display stack for process <pid>", 0, KDB_REPEAT_NONE); + kdb_register_repeat("bta", kdb_bt, "[DRSTCZEUIMA]", + "Display stack all processes", 0, KDB_REPEAT_NONE); + kdb_register_repeat("btc", kdb_bt, "", + "Backtrace current process on each cpu", 0, KDB_REPEAT_NONE); + kdb_register_repeat("btt", kdb_bt, "<vaddr>", + "Backtrace process given its struct task address", 0, + KDB_REPEAT_NONE); + kdb_register_repeat("ll", kdb_ll, "<first-element> <linkoffset> <cmd>", + "Execute cmd for each element in linked list", 0, KDB_REPEAT_NONE); + kdb_register_repeat("env", kdb_env, "", + "Show environment variables", 0, KDB_REPEAT_NONE); + kdb_register_repeat("set", kdb_set, "", + "Set environment variables", 0, KDB_REPEAT_NONE); + kdb_register_repeat("help", kdb_help, "", + "Display Help Message", 1, KDB_REPEAT_NONE); + kdb_register_repeat("?", kdb_help, "", + "Display Help Message", 0, KDB_REPEAT_NONE); + kdb_register_repeat("cpu", kdb_cpu, "<cpunum>", + "Switch to new cpu", 0, KDB_REPEAT_NONE); + kdb_register_repeat("kgdb", kdb_kgdb, "", + "Enter kgdb mode", 0, KDB_REPEAT_NONE); + kdb_register_repeat("ps", kdb_ps, "[<flags>|A]", + "Display active task list", 0, KDB_REPEAT_NONE); + kdb_register_repeat("pid", kdb_pid, "<pidnum>", + "Switch to another task", 0, KDB_REPEAT_NONE); + kdb_register_repeat("reboot", kdb_reboot, "", + "Reboot the machine immediately", 0, KDB_REPEAT_NONE); +#if defined(CONFIG_MODULES) + kdb_register_repeat("lsmod", kdb_lsmod, "", + "List loaded kernel modules", 0, KDB_REPEAT_NONE); +#endif +#if defined(CONFIG_MAGIC_SYSRQ) + kdb_register_repeat("sr", kdb_sr, "<key>", + "Magic SysRq key", 0, KDB_REPEAT_NONE); +#endif +#if defined(CONFIG_PRINTK) + kdb_register_repeat("dmesg", kdb_dmesg, "[lines]", + "Display syslog buffer", 0, KDB_REPEAT_NONE); +#endif + kdb_register_repeat("defcmd", kdb_defcmd, "name \"usage\" \"help\"", + "Define a set of commands, down to endefcmd", 0, KDB_REPEAT_NONE); + kdb_register_repeat("kill", kdb_kill, "<-signal> <pid>", + "Send a signal to a process", 0, KDB_REPEAT_NONE); + kdb_register_repeat("summary", kdb_summary, "", + "Summarize the system", 4, KDB_REPEAT_NONE); + kdb_register_repeat("per_cpu", kdb_per_cpu, "", + "Display per_cpu variables", 3, KDB_REPEAT_NONE); + kdb_register_repeat("grephelp", kdb_grep_help, "", + "Display help on | grep", 0, KDB_REPEAT_NONE); +} + +/* Execute any commands defined in kdb_cmds. */ +static void __init kdb_cmd_init(void) +{ + int i, diag; + for (i = 0; kdb_cmds[i]; ++i) { + diag = kdb_parse(kdb_cmds[i]); + if (diag) + kdb_printf("kdb command %s failed, kdb diag %d\n", + kdb_cmds[i], diag); + } + if (defcmd_in_progress) { + kdb_printf("Incomplete 'defcmd' set, forcing endefcmd\n"); + kdb_parse("endefcmd"); + } +} + +/* Intialize kdb_printf, breakpoint tables and kdb state */ +void __init kdb_init(int lvl) +{ + static int kdb_init_lvl = KDB_NOT_INITIALIZED; + int i; + + if (kdb_init_lvl == KDB_INIT_FULL || lvl <= kdb_init_lvl) + return; + for (i = kdb_init_lvl; i < lvl; i++) { + switch (i) { + case KDB_NOT_INITIALIZED: + kdb_inittab(); /* Initialize Command Table */ + kdb_initbptab(); /* Initialize Breakpoints */ + break; + case KDB_INIT_EARLY: + kdb_cmd_init(); /* Build kdb_cmds tables */ + break; + } + } + kdb_init_lvl = lvl; +} diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h new file mode 100644 index 0000000..97d3ba6 --- /dev/null +++ b/kernel/debug/kdb/kdb_private.h @@ -0,0 +1,300 @@ +#ifndef _KDBPRIVATE_H +#define _KDBPRIVATE_H + +/* + * Kernel Debugger Architecture Independent Private Headers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include <linux/kgdb.h> +#include "../debug_core.h" + +/* Kernel Debugger Error codes. Must not overlap with command codes. */ +#define KDB_NOTFOUND (-1) +#define KDB_ARGCOUNT (-2) +#define KDB_BADWIDTH (-3) +#define KDB_BADRADIX (-4) +#define KDB_NOTENV (-5) +#define KDB_NOENVVALUE (-6) +#define KDB_NOTIMP (-7) +#define KDB_ENVFULL (-8) +#define KDB_ENVBUFFULL (-9) +#define KDB_TOOMANYBPT (-10) +#define KDB_TOOMANYDBREGS (-11) +#define KDB_DUPBPT (-12) +#define KDB_BPTNOTFOUND (-13) +#define KDB_BADMODE (-14) +#define KDB_BADINT (-15) +#define KDB_INVADDRFMT (-16) +#define KDB_BADREG (-17) +#define KDB_BADCPUNUM (-18) +#define KDB_BADLENGTH (-19) +#define KDB_NOBP (-20) +#define KDB_BADADDR (-21) + +/* Kernel Debugger Command codes. Must not overlap with error codes. */ +#define KDB_CMD_GO (-1001) +#define KDB_CMD_CPU (-1002) +#define KDB_CMD_SS (-1003) +#define KDB_CMD_SSB (-1004) +#define KDB_CMD_KGDB (-1005) +#define KDB_CMD_KGDB2 (-1006) + +/* Internal debug flags */ +#define KDB_DEBUG_FLAG_BP 0x0002 /* Breakpoint subsystem debug */ +#define KDB_DEBUG_FLAG_BB_SUMM 0x0004 /* Basic block analysis, summary only */ +#define KDB_DEBUG_FLAG_AR 0x0008 /* Activation record, generic */ +#define KDB_DEBUG_FLAG_ARA 0x0010 /* Activation record, arch specific */ +#define KDB_DEBUG_FLAG_BB 0x0020 /* All basic block analysis */ +#define KDB_DEBUG_FLAG_STATE 0x0040 /* State flags */ +#define KDB_DEBUG_FLAG_MASK 0xffff /* All debug flags */ +#define KDB_DEBUG_FLAG_SHIFT 16 /* Shift factor for dbflags */ + +#define KDB_DEBUG(flag) (kdb_flags & \ + (KDB_DEBUG_FLAG_##flag << KDB_DEBUG_FLAG_SHIFT)) +#define KDB_DEBUG_STATE(text, value) if (KDB_DEBUG(STATE)) \ + kdb_print_state(text, value) + +#if BITS_PER_LONG == 32 + +#define KDB_PLATFORM_ENV "BYTESPERWORD=4" + +#define kdb_machreg_fmt "0x%lx" +#define kdb_machreg_fmt0 "0x%08lx" +#define kdb_bfd_vma_fmt "0x%lx" +#define kdb_bfd_vma_fmt0 "0x%08lx" +#define kdb_elfw_addr_fmt "0x%x" +#define kdb_elfw_addr_fmt0 "0x%08x" +#define kdb_f_count_fmt "%d" + +#elif BITS_PER_LONG == 64 + +#define KDB_PLATFORM_ENV "BYTESPERWORD=8" + +#define kdb_machreg_fmt "0x%lx" +#define kdb_machreg_fmt0 "0x%016lx" +#define kdb_bfd_vma_fmt "0x%lx" +#define kdb_bfd_vma_fmt0 "0x%016lx" +#define kdb_elfw_addr_fmt "0x%x" +#define kdb_elfw_addr_fmt0 "0x%016x" +#define kdb_f_count_fmt "%ld" + +#endif + +/* + * KDB_MAXBPT describes the total number of breakpoints + * supported by this architecure. + */ +#define KDB_MAXBPT 16 + +/* Maximum number of arguments to a function */ +#define KDB_MAXARGS 16 + +typedef enum { + KDB_REPEAT_NONE = 0, /* Do not repeat this command */ + KDB_REPEAT_NO_ARGS, /* Repeat the command without arguments */ + KDB_REPEAT_WITH_ARGS, /* Repeat the command including its arguments */ +} kdb_repeat_t; + +typedef int (*kdb_func_t)(int, const char **); + +/* Symbol table format returned by kallsyms. */ +typedef struct __ksymtab { + unsigned long value; /* Address of symbol */ + const char *mod_name; /* Module containing symbol or + * "kernel" */ + unsigned long mod_start; + unsigned long mod_end; + const char *sec_name; /* Section containing symbol */ + unsigned long sec_start; + unsigned long sec_end; + const char *sym_name; /* Full symbol name, including + * any version */ + unsigned long sym_start; + unsigned long sym_end; + } kdb_symtab_t; +extern int kallsyms_symbol_next(char *prefix_name, int flag); +extern int kallsyms_symbol_complete(char *prefix_name, int max_len); + +/* Exported Symbols for kernel loadable modules to use. */ +extern int kdb_register(char *, kdb_func_t, char *, char *, short); +extern int kdb_register_repeat(char *, kdb_func_t, char *, char *, + short, kdb_repeat_t); +extern int kdb_unregister(char *); + +extern int kdb_getarea_size(void *, unsigned long, size_t); +extern int kdb_putarea_size(unsigned long, void *, size_t); + +/* + * Like get_user and put_user, kdb_getarea and kdb_putarea take variable + * names, not pointers. The underlying *_size functions take pointers. + */ +#define kdb_getarea(x, addr) kdb_getarea_size(&(x), addr, sizeof((x))) +#define kdb_putarea(addr, x) kdb_putarea_size(addr, &(x), sizeof((x))) + +extern int kdb_getphysword(unsigned long *word, + unsigned long addr, size_t size); +extern int kdb_getword(unsigned long *, unsigned long, size_t); +extern int kdb_putword(unsigned long, unsigned long, size_t); + +extern int kdbgetularg(const char *, unsigned long *); +extern int kdb_set(int, const char **); +extern char *kdbgetenv(const char *); +extern int kdbgetintenv(const char *, int *); +extern int kdbgetaddrarg(int, const char **, int*, unsigned long *, + long *, char **); +extern int kdbgetsymval(const char *, kdb_symtab_t *); +extern int kdbnearsym(unsigned long, kdb_symtab_t *); +extern void kdbnearsym_cleanup(void); +extern char *kdb_strdup(const char *str, gfp_t type); +extern void kdb_symbol_print(unsigned long, const kdb_symtab_t *, unsigned int); + +/* Routine for debugging the debugger state. */ +extern void kdb_print_state(const char *, int); + +extern int kdb_state; +#define KDB_STATE_KDB 0x00000001 /* Cpu is inside kdb */ +#define KDB_STATE_LEAVING 0x00000002 /* Cpu is leaving kdb */ +#define KDB_STATE_CMD 0x00000004 /* Running a kdb command */ +#define KDB_STATE_KDB_CONTROL 0x00000008 /* This cpu is under + * kdb control */ +#define KDB_STATE_HOLD_CPU 0x00000010 /* Hold this cpu inside kdb */ +#define KDB_STATE_DOING_SS 0x00000020 /* Doing ss command */ +#define KDB_STATE_DOING_SSB 0x00000040 /* Doing ssb command, + * DOING_SS is also set */ +#define KDB_STATE_SSBPT 0x00000080 /* Install breakpoint + * after one ss, independent of + * DOING_SS */ +#define KDB_STATE_REENTRY 0x00000100 /* Valid re-entry into kdb */ +#define KDB_STATE_SUPPRESS 0x00000200 /* Suppress error messages */ +#define KDB_STATE_PAGER 0x00000400 /* pager is available */ +#define KDB_STATE_GO_SWITCH 0x00000800 /* go is switching + * back to initial cpu */ +#define KDB_STATE_PRINTF_LOCK 0x00001000 /* Holds kdb_printf lock */ +#define KDB_STATE_WAIT_IPI 0x00002000 /* Waiting for kdb_ipi() NMI */ +#define KDB_STATE_RECURSE 0x00004000 /* Recursive entry to kdb */ +#define KDB_STATE_IP_ADJUSTED 0x00008000 /* Restart IP has been + * adjusted */ +#define KDB_STATE_GO1 0x00010000 /* go only releases one cpu */ +#define KDB_STATE_KEYBOARD 0x00020000 /* kdb entered via + * keyboard on this cpu */ +#define KDB_STATE_KEXEC 0x00040000 /* kexec issued */ +#define KDB_STATE_DOING_KGDB 0x00080000 /* kgdb enter now issued */ +#define KDB_STATE_DOING_KGDB2 0x00100000 /* kgdb enter now issued */ +#define KDB_STATE_KGDB_TRANS 0x00200000 /* Transition to kgdb */ +#define KDB_STATE_ARCH 0xff000000 /* Reserved for arch + * specific use */ + +#define KDB_STATE(flag) (kdb_state & KDB_STATE_##flag) +#define KDB_STATE_SET(flag) ((void)(kdb_state |= KDB_STATE_##flag)) +#define KDB_STATE_CLEAR(flag) ((void)(kdb_state &= ~KDB_STATE_##flag)) + +extern int kdb_nextline; /* Current number of lines displayed */ + +typedef struct _kdb_bp { + unsigned long bp_addr; /* Address breakpoint is present at */ + unsigned int bp_free:1; /* This entry is available */ + unsigned int bp_enabled:1; /* Breakpoint is active in register */ + unsigned int bp_type:4; /* Uses hardware register */ + unsigned int bp_installed:1; /* Breakpoint is installed */ + unsigned int bp_delay:1; /* Do delayed bp handling */ + unsigned int bp_delayed:1; /* Delayed breakpoint */ + unsigned int bph_length; /* HW break length */ +} kdb_bp_t; + +#ifdef CONFIG_KGDB_KDB +extern kdb_bp_t kdb_breakpoints[/* KDB_MAXBPT */]; + +/* The KDB shell command table */ +typedef struct _kdbtab { + char *cmd_name; /* Command name */ + kdb_func_t cmd_func; /* Function to execute command */ + char *cmd_usage; /* Usage String for this command */ + char *cmd_help; /* Help message for this command */ + short cmd_flags; /* Parsing flags */ + short cmd_minlen; /* Minimum legal # command + * chars required */ + kdb_repeat_t cmd_repeat; /* Does command auto repeat on enter? */ +} kdbtab_t; + +extern int kdb_bt(int, const char **); /* KDB display back trace */ + +/* KDB breakpoint management functions */ +extern void kdb_initbptab(void); +extern void kdb_bp_install(struct pt_regs *); +extern void kdb_bp_remove(void); + +typedef enum { + KDB_DB_BPT, /* Breakpoint */ + KDB_DB_SS, /* Single-step trap */ + KDB_DB_SSB, /* Single step to branch */ + KDB_DB_SSBPT, /* Single step over breakpoint */ + KDB_DB_NOBPT /* Spurious breakpoint */ +} kdb_dbtrap_t; + +extern int kdb_main_loop(kdb_reason_t, kdb_reason_t, + int, kdb_dbtrap_t, struct pt_regs *); + +/* Miscellaneous functions and data areas */ +extern int kdb_grepping_flag; +extern char kdb_grep_string[]; +extern int kdb_grep_leading; +extern int kdb_grep_trailing; +extern char *kdb_cmds[]; +extern void kdb_syslog_data(char *syslog_data[]); +extern unsigned long kdb_task_state_string(const char *); +extern char kdb_task_state_char (const struct task_struct *); +extern unsigned long kdb_task_state(const struct task_struct *p, + unsigned long mask); +extern void kdb_ps_suppressed(void); +extern void kdb_ps1(const struct task_struct *p); +extern void kdb_print_nameval(const char *name, unsigned long val); +extern void kdb_send_sig_info(struct task_struct *p, struct siginfo *info); +extern void kdb_meminfo_proc_show(void); +extern const char *kdb_walk_kallsyms(loff_t *pos); +extern char *kdb_getstr(char *, size_t, char *); + +/* Defines for kdb_symbol_print */ +#define KDB_SP_SPACEB 0x0001 /* Space before string */ +#define KDB_SP_SPACEA 0x0002 /* Space after string */ +#define KDB_SP_PAREN 0x0004 /* Parenthesis around string */ +#define KDB_SP_VALUE 0x0008 /* Print the value of the address */ +#define KDB_SP_SYMSIZE 0x0010 /* Print the size of the symbol */ +#define KDB_SP_NEWLINE 0x0020 /* Newline after string */ +#define KDB_SP_DEFAULT (KDB_SP_VALUE|KDB_SP_PAREN) + +#define KDB_TSK(cpu) kgdb_info[cpu].task +#define KDB_TSKREGS(cpu) kgdb_info[cpu].debuggerinfo + +extern struct task_struct *kdb_curr_task(int); + +#define kdb_task_has_cpu(p) (task_curr(p)) + +/* Simplify coexistence with NPTL */ +#define kdb_do_each_thread(g, p) do_each_thread(g, p) +#define kdb_while_each_thread(g, p) while_each_thread(g, p) + +#define GFP_KDB (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) + +extern void *debug_kmalloc(size_t size, gfp_t flags); +extern void debug_kfree(void *); +extern void debug_kusage(void); + +extern void kdb_set_current_task(struct task_struct *); +extern struct task_struct *kdb_current_task; +#ifdef CONFIG_MODULES +extern struct list_head *kdb_modules; +#endif /* CONFIG_MODULES */ + +extern char kdb_prompt_str[]; + +#define KDB_WORD_SIZE ((int)sizeof(unsigned long)) + +#endif /* CONFIG_KGDB_KDB */ +#endif /* !_KDBPRIVATE_H */ diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c new file mode 100644 index 0000000..45344d5 --- /dev/null +++ b/kernel/debug/kdb/kdb_support.c @@ -0,0 +1,927 @@ +/* + * Kernel Debugger Architecture Independent Support Functions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + * 03/02/13 added new 2.5 kallsyms <xavier.bru@bull.net> + */ + +#include <stdarg.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/kallsyms.h> +#include <linux/stddef.h> +#include <linux/vmalloc.h> +#include <linux/ptrace.h> +#include <linux/module.h> +#include <linux/highmem.h> +#include <linux/hardirq.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/kdb.h> +#include <linux/slab.h> +#include "kdb_private.h" + +/* + * kdbgetsymval - Return the address of the given symbol. + * + * Parameters: + * symname Character string containing symbol name + * symtab Structure to receive results + * Returns: + * 0 Symbol not found, symtab zero filled + * 1 Symbol mapped to module/symbol/section, data in symtab + */ +int kdbgetsymval(const char *symname, kdb_symtab_t *symtab) +{ + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: symname=%s, symtab=%p\n", symname, + symtab); + memset(symtab, 0, sizeof(*symtab)); + symtab->sym_start = kallsyms_lookup_name(symname); + if (symtab->sym_start) { + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: returns 1, " + "symtab->sym_start=0x%lx\n", + symtab->sym_start); + return 1; + } + if (KDB_DEBUG(AR)) + kdb_printf("kdbgetsymval: returns 0\n"); + return 0; +} +EXPORT_SYMBOL(kdbgetsymval); + +static char *kdb_name_table[100]; /* arbitrary size */ + +/* + * kdbnearsym - Return the name of the symbol with the nearest address + * less than 'addr'. + * + * Parameters: + * addr Address to check for symbol near + * symtab Structure to receive results + * Returns: + * 0 No sections contain this address, symtab zero filled + * 1 Address mapped to module/symbol/section, data in symtab + * Remarks: + * 2.6 kallsyms has a "feature" where it unpacks the name into a + * string. If that string is reused before the caller expects it + * then the caller sees its string change without warning. To + * avoid cluttering up the main kdb code with lots of kdb_strdup, + * tests and kfree calls, kdbnearsym maintains an LRU list of the + * last few unique strings. The list is sized large enough to + * hold active strings, no kdb caller of kdbnearsym makes more + * than ~20 later calls before using a saved value. + */ +int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab) +{ + int ret = 0; + unsigned long symbolsize; + unsigned long offset; +#define knt1_size 128 /* must be >= kallsyms table size */ + char *knt1 = NULL; + + if (KDB_DEBUG(AR)) + kdb_printf("kdbnearsym: addr=0x%lx, symtab=%p\n", addr, symtab); + memset(symtab, 0, sizeof(*symtab)); + + if (addr < 4096) + goto out; + knt1 = debug_kmalloc(knt1_size, GFP_ATOMIC); + if (!knt1) { + kdb_printf("kdbnearsym: addr=0x%lx cannot kmalloc knt1\n", + addr); + goto out; + } + symtab->sym_name = kallsyms_lookup(addr, &symbolsize , &offset, + (char **)(&symtab->mod_name), knt1); + if (offset > 8*1024*1024) { + symtab->sym_name = NULL; + addr = offset = symbolsize = 0; + } + symtab->sym_start = addr - offset; + symtab->sym_end = symtab->sym_start + symbolsize; + ret = symtab->sym_name != NULL && *(symtab->sym_name) != '\0'; + + if (ret) { + int i; + /* Another 2.6 kallsyms "feature". Sometimes the sym_name is + * set but the buffer passed into kallsyms_lookup is not used, + * so it contains garbage. The caller has to work out which + * buffer needs to be saved. + * + * What was Rusty smoking when he wrote that code? + */ + if (symtab->sym_name != knt1) { + strncpy(knt1, symtab->sym_name, knt1_size); + knt1[knt1_size-1] = '\0'; + } + for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) { + if (kdb_name_table[i] && + strcmp(kdb_name_table[i], knt1) == 0) + break; + } + if (i >= ARRAY_SIZE(kdb_name_table)) { + debug_kfree(kdb_name_table[0]); + memcpy(kdb_name_table, kdb_name_table+1, + sizeof(kdb_name_table[0]) * + (ARRAY_SIZE(kdb_name_table)-1)); + } else { + debug_kfree(knt1); + knt1 = kdb_name_table[i]; + memcpy(kdb_name_table+i, kdb_name_table+i+1, + sizeof(kdb_name_table[0]) * + (ARRAY_SIZE(kdb_name_table)-i-1)); + } + i = ARRAY_SIZE(kdb_name_table) - 1; + kdb_name_table[i] = knt1; + symtab->sym_name = kdb_name_table[i]; + knt1 = NULL; + } + + if (symtab->mod_name == NULL) + symtab->mod_name = "kernel"; + if (KDB_DEBUG(AR)) + kdb_printf("kdbnearsym: returns %d symtab->sym_start=0x%lx, " + "symtab->mod_name=%p, symtab->sym_name=%p (%s)\n", ret, + symtab->sym_start, symtab->mod_name, symtab->sym_name, + symtab->sym_name); + +out: + debug_kfree(knt1); + return ret; +} + +void kdbnearsym_cleanup(void) +{ + int i; + for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) { + if (kdb_name_table[i]) { + debug_kfree(kdb_name_table[i]); + kdb_name_table[i] = NULL; + } + } +} + +static char ks_namebuf[KSYM_NAME_LEN+1], ks_namebuf_prev[KSYM_NAME_LEN+1]; + +/* + * kallsyms_symbol_complete + * + * Parameters: + * prefix_name prefix of a symbol name to lookup + * max_len maximum length that can be returned + * Returns: + * Number of symbols which match the given prefix. + * Notes: + * prefix_name is changed to contain the longest unique prefix that + * starts with this prefix (tab completion). + */ +int kallsyms_symbol_complete(char *prefix_name, int max_len) +{ + loff_t pos = 0; + int prefix_len = strlen(prefix_name), prev_len = 0; + int i, number = 0; + const char *name; + + while ((name = kdb_walk_kallsyms(&pos))) { + if (strncmp(name, prefix_name, prefix_len) == 0) { + strcpy(ks_namebuf, name); + /* Work out the longest name that matches the prefix */ + if (++number == 1) { + prev_len = min_t(int, max_len-1, + strlen(ks_namebuf)); + memcpy(ks_namebuf_prev, ks_namebuf, prev_len); + ks_namebuf_prev[prev_len] = '\0'; + continue; + } + for (i = 0; i < prev_len; i++) { + if (ks_namebuf[i] != ks_namebuf_prev[i]) { + prev_len = i; + ks_namebuf_prev[i] = '\0'; + break; + } + } + } + } + if (prev_len > prefix_len) + memcpy(prefix_name, ks_namebuf_prev, prev_len+1); + return number; +} + +/* + * kallsyms_symbol_next + * + * Parameters: + * prefix_name prefix of a symbol name to lookup + * flag 0 means search from the head, 1 means continue search. + * Returns: + * 1 if a symbol matches the given prefix. + * 0 if no string found + */ +int kallsyms_symbol_next(char *prefix_name, int flag) +{ + int prefix_len = strlen(prefix_name); + static loff_t pos; + const char *name; + + if (!flag) + pos = 0; + + while ((name = kdb_walk_kallsyms(&pos))) { + if (strncmp(name, prefix_name, prefix_len) == 0) { + strncpy(prefix_name, name, strlen(name)+1); + return 1; + } + } + return 0; +} + +/* + * kdb_symbol_print - Standard method for printing a symbol name and offset. + * Inputs: + * addr Address to be printed. + * symtab Address of symbol data, if NULL this routine does its + * own lookup. + * punc Punctuation for string, bit field. + * Remarks: + * The string and its punctuation is only printed if the address + * is inside the kernel, except that the value is always printed + * when requested. + */ +void kdb_symbol_print(unsigned long addr, const kdb_symtab_t *symtab_p, + unsigned int punc) +{ + kdb_symtab_t symtab, *symtab_p2; + if (symtab_p) { + symtab_p2 = (kdb_symtab_t *)symtab_p; + } else { + symtab_p2 = &symtab; + kdbnearsym(addr, symtab_p2); + } + if (!(symtab_p2->sym_name || (punc & KDB_SP_VALUE))) + return; + if (punc & KDB_SP_SPACEB) + kdb_printf(" "); + if (punc & KDB_SP_VALUE) + kdb_printf(kdb_machreg_fmt0, addr); + if (symtab_p2->sym_name) { + if (punc & KDB_SP_VALUE) + kdb_printf(" "); + if (punc & KDB_SP_PAREN) + kdb_printf("("); + if (strcmp(symtab_p2->mod_name, "kernel")) + kdb_printf("[%s]", symtab_p2->mod_name); + kdb_printf("%s", symtab_p2->sym_name); + if (addr != symtab_p2->sym_start) + kdb_printf("+0x%lx", addr - symtab_p2->sym_start); + if (punc & KDB_SP_SYMSIZE) + kdb_printf("/0x%lx", + symtab_p2->sym_end - symtab_p2->sym_start); + if (punc & KDB_SP_PAREN) + kdb_printf(")"); + } + if (punc & KDB_SP_SPACEA) + kdb_printf(" "); + if (punc & KDB_SP_NEWLINE) + kdb_printf("\n"); +} + +/* + * kdb_strdup - kdb equivalent of strdup, for disasm code. + * Inputs: + * str The string to duplicate. + * type Flags to kmalloc for the new string. + * Returns: + * Address of the new string, NULL if storage could not be allocated. + * Remarks: + * This is not in lib/string.c because it uses kmalloc which is not + * available when string.o is used in boot loaders. + */ +char *kdb_strdup(const char *str, gfp_t type) +{ + int n = strlen(str)+1; + char *s = kmalloc(n, type); + if (!s) + return NULL; + return strcpy(s, str); +} + +/* + * kdb_getarea_size - Read an area of data. The kdb equivalent of + * copy_from_user, with kdb messages for invalid addresses. + * Inputs: + * res Pointer to the area to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getarea_size(void *res, unsigned long addr, size_t size) +{ + int ret = probe_kernel_read((char *)res, (char *)addr, size); + if (ret) { + if (!KDB_STATE(SUPPRESS)) { + kdb_printf("kdb_getarea: Bad address 0x%lx\n", addr); + KDB_STATE_SET(SUPPRESS); + } + ret = KDB_BADADDR; + } else { + KDB_STATE_CLEAR(SUPPRESS); + } + return ret; +} + +/* + * kdb_putarea_size - Write an area of data. The kdb equivalent of + * copy_to_user, with kdb messages for invalid addresses. + * Inputs: + * addr Address of the area to write to. + * res Pointer to the area holding the data. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_putarea_size(unsigned long addr, void *res, size_t size) +{ + int ret = probe_kernel_read((char *)addr, (char *)res, size); + if (ret) { + if (!KDB_STATE(SUPPRESS)) { + kdb_printf("kdb_putarea: Bad address 0x%lx\n", addr); + KDB_STATE_SET(SUPPRESS); + } + ret = KDB_BADADDR; + } else { + KDB_STATE_CLEAR(SUPPRESS); + } + return ret; +} + +/* + * kdb_getphys - Read data from a physical address. Validate the + * address is in range, use kmap_atomic() to get data + * similar to kdb_getarea() - but for phys addresses + * Inputs: + * res Pointer to the word to receive the result + * addr Physical address of the area to copy + * size Size of the area + * Returns: + * 0 for success, < 0 for error. + */ +static int kdb_getphys(void *res, unsigned long addr, size_t size) +{ + unsigned long pfn; + void *vaddr; + struct page *page; + + pfn = (addr >> PAGE_SHIFT); + if (!pfn_valid(pfn)) + return 1; + page = pfn_to_page(pfn); + vaddr = kmap_atomic(page, KM_KDB); + memcpy(res, vaddr + (addr & (PAGE_SIZE - 1)), size); + kunmap_atomic(vaddr, KM_KDB); + + return 0; +} + +/* + * kdb_getphysword + * Inputs: + * word Pointer to the word to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getphysword(unsigned long *word, unsigned long addr, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + *word = 0; /* Default value if addr or size is invalid */ + + switch (size) { + case 1: + diag = kdb_getphys(&w1, addr, sizeof(w1)); + if (!diag) + *word = w1; + break; + case 2: + diag = kdb_getphys(&w2, addr, sizeof(w2)); + if (!diag) + *word = w2; + break; + case 4: + diag = kdb_getphys(&w4, addr, sizeof(w4)); + if (!diag) + *word = w4; + break; + case 8: + if (size <= sizeof(*word)) { + diag = kdb_getphys(&w8, addr, sizeof(w8)); + if (!diag) + *word = w8; + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_getphysword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_getword - Read a binary value. Unlike kdb_getarea, this treats + * data as numbers. + * Inputs: + * word Pointer to the word to receive the result. + * addr Address of the area to copy. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_getword(unsigned long *word, unsigned long addr, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + *word = 0; /* Default value if addr or size is invalid */ + switch (size) { + case 1: + diag = kdb_getarea(w1, addr); + if (!diag) + *word = w1; + break; + case 2: + diag = kdb_getarea(w2, addr); + if (!diag) + *word = w2; + break; + case 4: + diag = kdb_getarea(w4, addr); + if (!diag) + *word = w4; + break; + case 8: + if (size <= sizeof(*word)) { + diag = kdb_getarea(w8, addr); + if (!diag) + *word = w8; + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_getword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_putword - Write a binary value. Unlike kdb_putarea, this + * treats data as numbers. + * Inputs: + * addr Address of the area to write to.. + * word The value to set. + * size Size of the area. + * Returns: + * 0 for success, < 0 for error. + */ +int kdb_putword(unsigned long addr, unsigned long word, size_t size) +{ + int diag; + __u8 w1; + __u16 w2; + __u32 w4; + __u64 w8; + switch (size) { + case 1: + w1 = word; + diag = kdb_putarea(addr, w1); + break; + case 2: + w2 = word; + diag = kdb_putarea(addr, w2); + break; + case 4: + w4 = word; + diag = kdb_putarea(addr, w4); + break; + case 8: + if (size <= sizeof(word)) { + w8 = word; + diag = kdb_putarea(addr, w8); + break; + } + /* drop through */ + default: + diag = KDB_BADWIDTH; + kdb_printf("kdb_putword: bad width %ld\n", (long) size); + } + return diag; +} + +/* + * kdb_task_state_string - Convert a string containing any of the + * letters DRSTCZEUIMA to a mask for the process state field and + * return the value. If no argument is supplied, return the mask + * that corresponds to environment variable PS, DRSTCZEU by + * default. + * Inputs: + * s String to convert + * Returns: + * Mask for process state. + * Notes: + * The mask folds data from several sources into a single long value, so + * be carefull not to overlap the bits. TASK_* bits are in the LSB, + * special cases like UNRUNNABLE are in the MSB. As of 2.6.10-rc1 there + * is no overlap between TASK_* and EXIT_* but that may not always be + * true, so EXIT_* bits are shifted left 16 bits before being stored in + * the mask. + */ + +/* unrunnable is < 0 */ +#define UNRUNNABLE (1UL << (8*sizeof(unsigned long) - 1)) +#define RUNNING (1UL << (8*sizeof(unsigned long) - 2)) +#define IDLE (1UL << (8*sizeof(unsigned long) - 3)) +#define DAEMON (1UL << (8*sizeof(unsigned long) - 4)) + +unsigned long kdb_task_state_string(const char *s) +{ + long res = 0; + if (!s) { + s = kdbgetenv("PS"); + if (!s) + s = "DRSTCZEU"; /* default value for ps */ + } + while (*s) { + switch (*s) { + case 'D': + res |= TASK_UNINTERRUPTIBLE; + break; + case 'R': + res |= RUNNING; + break; + case 'S': + res |= TASK_INTERRUPTIBLE; + break; + case 'T': + res |= TASK_STOPPED; + break; + case 'C': + res |= TASK_TRACED; + break; + case 'Z': + res |= EXIT_ZOMBIE << 16; + break; + case 'E': + res |= EXIT_DEAD << 16; + break; + case 'U': + res |= UNRUNNABLE; + break; + case 'I': + res |= IDLE; + break; + case 'M': + res |= DAEMON; + break; + case 'A': + res = ~0UL; + break; + default: + kdb_printf("%s: unknown flag '%c' ignored\n", + __func__, *s); + break; + } + ++s; + } + return res; +} + +/* + * kdb_task_state_char - Return the character that represents the task state. + * Inputs: + * p struct task for the process + * Returns: + * One character to represent the task state. + */ +char kdb_task_state_char (const struct task_struct *p) +{ + int cpu; + char state; + unsigned long tmp; + + if (!p || probe_kernel_read(&tmp, (char *)p, sizeof(unsigned long))) + return 'E'; + + cpu = kdb_process_cpu(p); + state = (p->state == 0) ? 'R' : + (p->state < 0) ? 'U' : + (p->state & TASK_UNINTERRUPTIBLE) ? 'D' : + (p->state & TASK_STOPPED) ? 'T' : + (p->state & TASK_TRACED) ? 'C' : + (p->exit_state & EXIT_ZOMBIE) ? 'Z' : + (p->exit_state & EXIT_DEAD) ? 'E' : + (p->state & TASK_INTERRUPTIBLE) ? 'S' : '?'; + if (p->pid == 0) { + /* Idle task. Is it really idle, apart from the kdb + * interrupt? */ + if (!kdb_task_has_cpu(p) || kgdb_info[cpu].irq_depth == 1) { + if (cpu != kdb_initial_cpu) + state = 'I'; /* idle task */ + } + } else if (!p->mm && state == 'S') { + state = 'M'; /* sleeping system daemon */ + } + return state; +} + +/* + * kdb_task_state - Return true if a process has the desired state + * given by the mask. + * Inputs: + * p struct task for the process + * mask mask from kdb_task_state_string to select processes + * Returns: + * True if the process matches at least one criteria defined by the mask. + */ +unsigned long kdb_task_state(const struct task_struct *p, unsigned long mask) +{ + char state[] = { kdb_task_state_char(p), '\0' }; + return (mask & kdb_task_state_string(state)) != 0; +} + +/* + * kdb_print_nameval - Print a name and its value, converting the + * value to a symbol lookup if possible. + * Inputs: + * name field name to print + * val value of field + */ +void kdb_print_nameval(const char *name, unsigned long val) +{ + kdb_symtab_t symtab; + kdb_printf(" %-11.11s ", name); + if (kdbnearsym(val, &symtab)) + kdb_symbol_print(val, &symtab, + KDB_SP_VALUE|KDB_SP_SYMSIZE|KDB_SP_NEWLINE); + else + kdb_printf("0x%lx\n", val); +} + +/* Last ditch allocator for debugging, so we can still debug even when + * the GFP_ATOMIC pool has been exhausted. The algorithms are tuned + * for space usage, not for speed. One smallish memory pool, the free + * chain is always in ascending address order to allow coalescing, + * allocations are done in brute force best fit. + */ + +struct debug_alloc_header { + u32 next; /* offset of next header from start of pool */ + u32 size; + void *caller; +}; + +/* The memory returned by this allocator must be aligned, which means + * so must the header size. Do not assume that sizeof(struct + * debug_alloc_header) is a multiple of the alignment, explicitly + * calculate the overhead of this header, including the alignment. + * The rest of this code must not use sizeof() on any header or + * pointer to a header. + */ +#define dah_align 8 +#define dah_overhead ALIGN(sizeof(struct debug_alloc_header), dah_align) + +static u64 debug_alloc_pool_aligned[256*1024/dah_align]; /* 256K pool */ +static char *debug_alloc_pool = (char *)debug_alloc_pool_aligned; +static u32 dah_first, dah_first_call = 1, dah_used, dah_used_max; + +/* Locking is awkward. The debug code is called from all contexts, + * including non maskable interrupts. A normal spinlock is not safe + * in NMI context. Try to get the debug allocator lock, if it cannot + * be obtained after a second then give up. If the lock could not be + * previously obtained on this cpu then only try once. + * + * sparse has no annotation for "this function _sometimes_ acquires a + * lock", so fudge the acquire/release notation. + */ +static DEFINE_SPINLOCK(dap_lock); +static int get_dap_lock(void) + __acquires(dap_lock) +{ + static int dap_locked = -1; + int count; + if (dap_locked == smp_processor_id()) + count = 1; + else + count = 1000; + while (1) { + if (spin_trylock(&dap_lock)) { + dap_locked = -1; + return 1; + } + if (!count--) + break; + udelay(1000); + } + dap_locked = smp_processor_id(); + __acquire(dap_lock); + return 0; +} + +void *debug_kmalloc(size_t size, gfp_t flags) +{ + unsigned int rem, h_offset; + struct debug_alloc_header *best, *bestprev, *prev, *h; + void *p = NULL; + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return NULL; + } + h = (struct debug_alloc_header *)(debug_alloc_pool + dah_first); + if (dah_first_call) { + h->size = sizeof(debug_alloc_pool_aligned) - dah_overhead; + dah_first_call = 0; + } + size = ALIGN(size, dah_align); + prev = best = bestprev = NULL; + while (1) { + if (h->size >= size && (!best || h->size < best->size)) { + best = h; + bestprev = prev; + if (h->size == size) + break; + } + if (!h->next) + break; + prev = h; + h = (struct debug_alloc_header *)(debug_alloc_pool + h->next); + } + if (!best) + goto out; + rem = best->size - size; + /* The pool must always contain at least one header */ + if (best->next == 0 && bestprev == NULL && rem < dah_overhead) + goto out; + if (rem >= dah_overhead) { + best->size = size; + h_offset = ((char *)best - debug_alloc_pool) + + dah_overhead + best->size; + h = (struct debug_alloc_header *)(debug_alloc_pool + h_offset); + h->size = rem - dah_overhead; + h->next = best->next; + } else + h_offset = best->next; + best->caller = __builtin_return_address(0); + dah_used += best->size; + dah_used_max = max(dah_used, dah_used_max); + if (bestprev) + bestprev->next = h_offset; + else + dah_first = h_offset; + p = (char *)best + dah_overhead; + memset(p, POISON_INUSE, best->size - 1); + *((char *)p + best->size - 1) = POISON_END; +out: + spin_unlock(&dap_lock); + return p; +} + +void debug_kfree(void *p) +{ + struct debug_alloc_header *h; + unsigned int h_offset; + if (!p) + return; + if ((char *)p < debug_alloc_pool || + (char *)p >= debug_alloc_pool + sizeof(debug_alloc_pool_aligned)) { + kfree(p); + return; + } + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return; /* memory leak, cannot be helped */ + } + h = (struct debug_alloc_header *)((char *)p - dah_overhead); + memset(p, POISON_FREE, h->size - 1); + *((char *)p + h->size - 1) = POISON_END; + h->caller = NULL; + dah_used -= h->size; + h_offset = (char *)h - debug_alloc_pool; + if (h_offset < dah_first) { + h->next = dah_first; + dah_first = h_offset; + } else { + struct debug_alloc_header *prev; + unsigned int prev_offset; + prev = (struct debug_alloc_header *)(debug_alloc_pool + + dah_first); + while (1) { + if (!prev->next || prev->next > h_offset) + break; + prev = (struct debug_alloc_header *) + (debug_alloc_pool + prev->next); + } + prev_offset = (char *)prev - debug_alloc_pool; + if (prev_offset + dah_overhead + prev->size == h_offset) { + prev->size += dah_overhead + h->size; + memset(h, POISON_FREE, dah_overhead - 1); + *((char *)h + dah_overhead - 1) = POISON_END; + h = prev; + h_offset = prev_offset; + } else { + h->next = prev->next; + prev->next = h_offset; + } + } + if (h_offset + dah_overhead + h->size == h->next) { + struct debug_alloc_header *next; + next = (struct debug_alloc_header *) + (debug_alloc_pool + h->next); + h->size += dah_overhead + next->size; + h->next = next->next; + memset(next, POISON_FREE, dah_overhead - 1); + *((char *)next + dah_overhead - 1) = POISON_END; + } + spin_unlock(&dap_lock); +} + +void debug_kusage(void) +{ + struct debug_alloc_header *h_free, *h_used; +#ifdef CONFIG_IA64 + /* FIXME: using dah for ia64 unwind always results in a memory leak. + * Fix that memory leak first, then set debug_kusage_one_time = 1 for + * all architectures. + */ + static int debug_kusage_one_time; +#else + static int debug_kusage_one_time = 1; +#endif + if (!get_dap_lock()) { + __release(dap_lock); /* we never actually got it */ + return; + } + h_free = (struct debug_alloc_header *)(debug_alloc_pool + dah_first); + if (dah_first == 0 && + (h_free->size == sizeof(debug_alloc_pool_aligned) - dah_overhead || + dah_first_call)) + goto out; + if (!debug_kusage_one_time) + goto out; + debug_kusage_one_time = 0; + kdb_printf("%s: debug_kmalloc memory leak dah_first %d\n", + __func__, dah_first); + if (dah_first) { + h_used = (struct debug_alloc_header *)debug_alloc_pool; + kdb_printf("%s: h_used %p size %d\n", __func__, h_used, + h_used->size); + } + do { + h_used = (struct debug_alloc_header *) + ((char *)h_free + dah_overhead + h_free->size); + kdb_printf("%s: h_used %p size %d caller %p\n", + __func__, h_used, h_used->size, h_used->caller); + h_free = (struct debug_alloc_header *) + (debug_alloc_pool + h_free->next); + } while (h_free->next); + h_used = (struct debug_alloc_header *) + ((char *)h_free + dah_overhead + h_free->size); + if ((char *)h_used - debug_alloc_pool != + sizeof(debug_alloc_pool_aligned)) + kdb_printf("%s: h_used %p size %d caller %p\n", + __func__, h_used, h_used->size, h_used->caller); +out: + spin_unlock(&dap_lock); +} + +/* Maintain a small stack of kdb_flags to allow recursion without disturbing + * the global kdb state. + */ + +static int kdb_flags_stack[4], kdb_flags_index; + +void kdb_save_flags(void) +{ + BUG_ON(kdb_flags_index >= ARRAY_SIZE(kdb_flags_stack)); + kdb_flags_stack[kdb_flags_index++] = kdb_flags; +} + +void kdb_restore_flags(void) +{ + BUG_ON(kdb_flags_index <= 0); + kdb_flags = kdb_flags_stack[--kdb_flags_index]; +} diff --git a/kernel/exit.c b/kernel/exit.c index eabca5a..019a284 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -1002,8 +1002,10 @@ NORET_TYPE void do_exit(long code) exit_notify(tsk, group_dead); #ifdef CONFIG_NUMA + task_lock(tsk); mpol_put(tsk->mempolicy); tsk->mempolicy = NULL; + task_unlock(tsk); #endif #ifdef CONFIG_FUTEX if (unlikely(current->pi_state_cache)) diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c index 13aff29..6f6d091 100644 --- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/seq_file.h> #include <linux/fs.h> +#include <linux/kdb.h> #include <linux/err.h> #include <linux/proc_fs.h> #include <linux/sched.h> /* for cond_resched */ @@ -516,6 +517,26 @@ static int kallsyms_open(struct inode *inode, struct file *file) return ret; } +#ifdef CONFIG_KGDB_KDB +const char *kdb_walk_kallsyms(loff_t *pos) +{ + static struct kallsym_iter kdb_walk_kallsyms_iter; + if (*pos == 0) { + memset(&kdb_walk_kallsyms_iter, 0, + sizeof(kdb_walk_kallsyms_iter)); + reset_iter(&kdb_walk_kallsyms_iter, 0); + } + while (1) { + if (!update_iter(&kdb_walk_kallsyms_iter, *pos)) + return NULL; + ++*pos; + /* Some debugging symbols have no name. Ignore them. */ + if (kdb_walk_kallsyms_iter.name[0]) + return kdb_walk_kallsyms_iter.name; + } +} +#endif /* CONFIG_KGDB_KDB */ + static const struct file_operations kallsyms_operations = { .open = kallsyms_open, .read = seq_read, diff --git a/kernel/kgdb.c b/kernel/kgdb.c deleted file mode 100644 index 11f3515..0000000 --- a/kernel/kgdb.c +++ /dev/null @@ -1,1764 +0,0 @@ -/* - * KGDB stub. - * - * Maintainer: Jason Wessel <jason.wessel@windriver.com> - * - * Copyright (C) 2000-2001 VERITAS Software Corporation. - * Copyright (C) 2002-2004 Timesys Corporation - * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> - * Copyright (C) 2004 Pavel Machek <pavel@suse.cz> - * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> - * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. - * Copyright (C) 2005-2008 Wind River Systems, Inc. - * Copyright (C) 2007 MontaVista Software, Inc. - * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> - * - * Contributors at various stages not listed above: - * Jason Wessel ( jason.wessel@windriver.com ) - * George Anzinger <george@mvista.com> - * Anurekh Saxena (anurekh.saxena@timesys.com) - * Lake Stevens Instrument Division (Glenn Engel) - * Jim Kingdon, Cygnus Support. - * - * Original KGDB stub: David Grothe <dave@gcom.com>, - * Tigran Aivazian <tigran@sco.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#include <linux/pid_namespace.h> -#include <linux/clocksource.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/console.h> -#include <linux/threads.h> -#include <linux/uaccess.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/ptrace.h> -#include <linux/reboot.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/sysrq.h> -#include <linux/init.h> -#include <linux/kgdb.h> -#include <linux/pid.h> -#include <linux/smp.h> -#include <linux/mm.h> - -#include <asm/cacheflush.h> -#include <asm/byteorder.h> -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/unaligned.h> - -static int kgdb_break_asap; - -#define KGDB_MAX_THREAD_QUERY 17 -struct kgdb_state { - int ex_vector; - int signo; - int err_code; - int cpu; - int pass_exception; - unsigned long thr_query; - unsigned long threadid; - long kgdb_usethreadid; - struct pt_regs *linux_regs; -}; - -/* Exception state values */ -#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */ -#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */ -#define DCPU_IS_SLAVE 0x4 /* Slave cpu enter exception */ -#define DCPU_SSTEP 0x8 /* CPU is single stepping */ - -static struct debuggerinfo_struct { - void *debuggerinfo; - struct task_struct *task; - int exception_state; -} kgdb_info[NR_CPUS]; - -/** - * kgdb_connected - Is a host GDB connected to us? - */ -int kgdb_connected; -EXPORT_SYMBOL_GPL(kgdb_connected); - -/* All the KGDB handlers are installed */ -static int kgdb_io_module_registered; - -/* Guard for recursive entry */ -static int exception_level; - -static struct kgdb_io *kgdb_io_ops; -static DEFINE_SPINLOCK(kgdb_registration_lock); - -/* kgdb console driver is loaded */ -static int kgdb_con_registered; -/* determine if kgdb console output should be used */ -static int kgdb_use_con; - -static int __init opt_kgdb_con(char *str) -{ - kgdb_use_con = 1; - return 0; -} - -early_param("kgdbcon", opt_kgdb_con); - -module_param(kgdb_use_con, int, 0644); - -/* - * Holds information about breakpoints in a kernel. These breakpoints are - * added and removed by gdb. - */ -static struct kgdb_bkpt kgdb_break[KGDB_MAX_BREAKPOINTS] = { - [0 ... KGDB_MAX_BREAKPOINTS-1] = { .state = BP_UNDEFINED } -}; - -/* - * The CPU# of the active CPU, or -1 if none: - */ -atomic_t kgdb_active = ATOMIC_INIT(-1); - -/* - * We use NR_CPUs not PERCPU, in case kgdb is used to debug early - * bootup code (which might not have percpu set up yet): - */ -static atomic_t passive_cpu_wait[NR_CPUS]; -static atomic_t cpu_in_kgdb[NR_CPUS]; -atomic_t kgdb_setting_breakpoint; - -struct task_struct *kgdb_usethread; -struct task_struct *kgdb_contthread; - -int kgdb_single_step; -pid_t kgdb_sstep_pid; - -/* Our I/O buffers. */ -static char remcom_in_buffer[BUFMAX]; -static char remcom_out_buffer[BUFMAX]; - -/* Storage for the registers, in GDB format. */ -static unsigned long gdb_regs[(NUMREGBYTES + - sizeof(unsigned long) - 1) / - sizeof(unsigned long)]; - -/* to keep track of the CPU which is doing the single stepping*/ -atomic_t kgdb_cpu_doing_single_step = ATOMIC_INIT(-1); - -/* - * If you are debugging a problem where roundup (the collection of - * all other CPUs) is a problem [this should be extremely rare], - * then use the nokgdbroundup option to avoid roundup. In that case - * the other CPUs might interfere with your debugging context, so - * use this with care: - */ -static int kgdb_do_roundup = 1; - -static int __init opt_nokgdbroundup(char *str) -{ - kgdb_do_roundup = 0; - - return 0; -} - -early_param("nokgdbroundup", opt_nokgdbroundup); - -/* - * Finally, some KGDB code :-) - */ - -/* - * Weak aliases for breakpoint management, - * can be overriden by architectures when needed: - */ -int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) -{ - int err; - - err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE); - if (err) - return err; - - return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr, - BREAK_INSTR_SIZE); -} - -int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) -{ - return probe_kernel_write((char *)addr, - (char *)bundle, BREAK_INSTR_SIZE); -} - -int __weak kgdb_validate_break_address(unsigned long addr) -{ - char tmp_variable[BREAK_INSTR_SIZE]; - int err; - /* Validate setting the breakpoint and then removing it. In the - * remove fails, the kernel needs to emit a bad message because we - * are deep trouble not being able to put things back the way we - * found them. - */ - err = kgdb_arch_set_breakpoint(addr, tmp_variable); - if (err) - return err; - err = kgdb_arch_remove_breakpoint(addr, tmp_variable); - if (err) - printk(KERN_ERR "KGDB: Critical breakpoint error, kernel " - "memory destroyed at: %lx", addr); - return err; -} - -unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs) -{ - return instruction_pointer(regs); -} - -int __weak kgdb_arch_init(void) -{ - return 0; -} - -int __weak kgdb_skipexception(int exception, struct pt_regs *regs) -{ - return 0; -} - -void __weak -kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code) -{ - return; -} - -/** - * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb. - * @regs: Current &struct pt_regs. - * - * This function will be called if the particular architecture must - * disable hardware debugging while it is processing gdb packets or - * handling exception. - */ -void __weak kgdb_disable_hw_debug(struct pt_regs *regs) -{ -} - -/* - * GDB remote protocol parser: - */ - -static int hex(char ch) -{ - if ((ch >= 'a') && (ch <= 'f')) - return ch - 'a' + 10; - if ((ch >= '0') && (ch <= '9')) - return ch - '0'; - if ((ch >= 'A') && (ch <= 'F')) - return ch - 'A' + 10; - return -1; -} - -/* scan for the sequence $<data>#<checksum> */ -static void get_packet(char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - int count; - char ch; - - do { - /* - * Spin and wait around for the start character, ignore all - * other characters: - */ - while ((ch = (kgdb_io_ops->read_char())) != '$') - /* nothing */; - - kgdb_connected = 1; - checksum = 0; - xmitcsum = -1; - - count = 0; - - /* - * now, read until a # or end of buffer is found: - */ - while (count < (BUFMAX - 1)) { - ch = kgdb_io_ops->read_char(); - if (ch == '#') - break; - checksum = checksum + ch; - buffer[count] = ch; - count = count + 1; - } - buffer[count] = 0; - - if (ch == '#') { - xmitcsum = hex(kgdb_io_ops->read_char()) << 4; - xmitcsum += hex(kgdb_io_ops->read_char()); - - if (checksum != xmitcsum) - /* failed checksum */ - kgdb_io_ops->write_char('-'); - else - /* successful transfer */ - kgdb_io_ops->write_char('+'); - if (kgdb_io_ops->flush) - kgdb_io_ops->flush(); - } - } while (checksum != xmitcsum); -} - -/* - * Send the packet in buffer. - * Check for gdb connection if asked for. - */ -static void put_packet(char *buffer) -{ - unsigned char checksum; - int count; - char ch; - - /* - * $<packet info>#<checksum>. - */ - while (1) { - kgdb_io_ops->write_char('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count])) { - kgdb_io_ops->write_char(ch); - checksum += ch; - count++; - } - - kgdb_io_ops->write_char('#'); - kgdb_io_ops->write_char(hex_asc_hi(checksum)); - kgdb_io_ops->write_char(hex_asc_lo(checksum)); - if (kgdb_io_ops->flush) - kgdb_io_ops->flush(); - - /* Now see what we get in reply. */ - ch = kgdb_io_ops->read_char(); - - if (ch == 3) - ch = kgdb_io_ops->read_char(); - - /* If we get an ACK, we are done. */ - if (ch == '+') - return; - - /* - * If we get the start of another packet, this means - * that GDB is attempting to reconnect. We will NAK - * the packet being sent, and stop trying to send this - * packet. - */ - if (ch == '$') { - kgdb_io_ops->write_char('-'); - if (kgdb_io_ops->flush) - kgdb_io_ops->flush(); - return; - } - } -} - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null). May return an error. - */ -int kgdb_mem2hex(char *mem, char *buf, int count) -{ - char *tmp; - int err; - - /* - * We use the upper half of buf as an intermediate buffer for the - * raw memory copy. Hex conversion will work against this one. - */ - tmp = buf + count; - - err = probe_kernel_read(tmp, mem, count); - if (!err) { - while (count > 0) { - buf = pack_hex_byte(buf, *tmp); - tmp++; - count--; - } - - *buf = 0; - } - - return err; -} - -/* - * Copy the binary array pointed to by buf into mem. Fix $, #, and - * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success. - * The input buf is overwitten with the result to write to mem. - */ -static int kgdb_ebin2mem(char *buf, char *mem, int count) -{ - int size = 0; - char *c = buf; - - while (count-- > 0) { - c[size] = *buf++; - if (c[size] == 0x7d) - c[size] = *buf++ ^ 0x20; - size++; - } - - return probe_kernel_write(mem, c, size); -} - -/* - * Convert the hex array pointed to by buf into binary to be placed in mem. - * Return a pointer to the character AFTER the last byte written. - * May return an error. - */ -int kgdb_hex2mem(char *buf, char *mem, int count) -{ - char *tmp_raw; - char *tmp_hex; - - /* - * We use the upper half of buf as an intermediate buffer for the - * raw memory that is converted from hex. - */ - tmp_raw = buf + count * 2; - - tmp_hex = tmp_raw - 1; - while (tmp_hex >= buf) { - tmp_raw--; - *tmp_raw = hex(*tmp_hex--); - *tmp_raw |= hex(*tmp_hex--) << 4; - } - - return probe_kernel_write(mem, tmp_raw, count); -} - -/* - * While we find nice hex chars, build a long_val. - * Return number of chars processed. - */ -int kgdb_hex2long(char **ptr, unsigned long *long_val) -{ - int hex_val; - int num = 0; - int negate = 0; - - *long_val = 0; - - if (**ptr == '-') { - negate = 1; - (*ptr)++; - } - while (**ptr) { - hex_val = hex(**ptr); - if (hex_val < 0) - break; - - *long_val = (*long_val << 4) | hex_val; - num++; - (*ptr)++; - } - - if (negate) - *long_val = -*long_val; - - return num; -} - -/* Write memory due to an 'M' or 'X' packet. */ -static int write_mem_msg(int binary) -{ - char *ptr = &remcom_in_buffer[1]; - unsigned long addr; - unsigned long length; - int err; - - if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' && - kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') { - if (binary) - err = kgdb_ebin2mem(ptr, (char *)addr, length); - else - err = kgdb_hex2mem(ptr, (char *)addr, length); - if (err) - return err; - if (CACHE_FLUSH_IS_SAFE) - flush_icache_range(addr, addr + length); - return 0; - } - - return -EINVAL; -} - -static void error_packet(char *pkt, int error) -{ - error = -error; - pkt[0] = 'E'; - pkt[1] = hex_asc[(error / 10)]; - pkt[2] = hex_asc[(error % 10)]; - pkt[3] = '\0'; -} - -/* - * Thread ID accessors. We represent a flat TID space to GDB, where - * the per CPU idle threads (which under Linux all have PID 0) are - * remapped to negative TIDs. - */ - -#define BUF_THREAD_ID_SIZE 16 - -static char *pack_threadid(char *pkt, unsigned char *id) -{ - char *limit; - - limit = pkt + BUF_THREAD_ID_SIZE; - while (pkt < limit) - pkt = pack_hex_byte(pkt, *id++); - - return pkt; -} - -static void int_to_threadref(unsigned char *id, int value) -{ - unsigned char *scan; - int i = 4; - - scan = (unsigned char *)id; - while (i--) - *scan++ = 0; - put_unaligned_be32(value, scan); -} - -static struct task_struct *getthread(struct pt_regs *regs, int tid) -{ - /* - * Non-positive TIDs are remapped to the cpu shadow information - */ - if (tid == 0 || tid == -1) - tid = -atomic_read(&kgdb_active) - 2; - if (tid < -1 && tid > -NR_CPUS - 2) { - if (kgdb_info[-tid - 2].task) - return kgdb_info[-tid - 2].task; - else - return idle_task(-tid - 2); - } - if (tid <= 0) { - printk(KERN_ERR "KGDB: Internal thread select error\n"); - dump_stack(); - return NULL; - } - - /* - * find_task_by_pid_ns() does not take the tasklist lock anymore - * but is nicely RCU locked - hence is a pretty resilient - * thing to use: - */ - return find_task_by_pid_ns(tid, &init_pid_ns); -} - -/* - * Some architectures need cache flushes when we set/clear a - * breakpoint: - */ -static void kgdb_flush_swbreak_addr(unsigned long addr) -{ - if (!CACHE_FLUSH_IS_SAFE) - return; - - if (current->mm && current->mm->mmap_cache) { - flush_cache_range(current->mm->mmap_cache, - addr, addr + BREAK_INSTR_SIZE); - } - /* Force flush instruction cache if it was outside the mm */ - flush_icache_range(addr, addr + BREAK_INSTR_SIZE); -} - -/* - * SW breakpoint management: - */ -static int kgdb_activate_sw_breakpoints(void) -{ - unsigned long addr; - int error; - int ret = 0; - int i; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state != BP_SET) - continue; - - addr = kgdb_break[i].bpt_addr; - error = kgdb_arch_set_breakpoint(addr, - kgdb_break[i].saved_instr); - if (error) { - ret = error; - printk(KERN_INFO "KGDB: BP install failed: %lx", addr); - continue; - } - - kgdb_flush_swbreak_addr(addr); - kgdb_break[i].state = BP_ACTIVE; - } - return ret; -} - -static int kgdb_set_sw_break(unsigned long addr) -{ - int err = kgdb_validate_break_address(addr); - int breakno = -1; - int i; - - if (err) - return err; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if ((kgdb_break[i].state == BP_SET) && - (kgdb_break[i].bpt_addr == addr)) - return -EEXIST; - } - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state == BP_REMOVED && - kgdb_break[i].bpt_addr == addr) { - breakno = i; - break; - } - } - - if (breakno == -1) { - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state == BP_UNDEFINED) { - breakno = i; - break; - } - } - } - - if (breakno == -1) - return -E2BIG; - - kgdb_break[breakno].state = BP_SET; - kgdb_break[breakno].type = BP_BREAKPOINT; - kgdb_break[breakno].bpt_addr = addr; - - return 0; -} - -static int kgdb_deactivate_sw_breakpoints(void) -{ - unsigned long addr; - int error; - int ret = 0; - int i; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state != BP_ACTIVE) - continue; - addr = kgdb_break[i].bpt_addr; - error = kgdb_arch_remove_breakpoint(addr, - kgdb_break[i].saved_instr); - if (error) { - printk(KERN_INFO "KGDB: BP remove failed: %lx\n", addr); - ret = error; - } - - kgdb_flush_swbreak_addr(addr); - kgdb_break[i].state = BP_SET; - } - return ret; -} - -static int kgdb_remove_sw_break(unsigned long addr) -{ - int i; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if ((kgdb_break[i].state == BP_SET) && - (kgdb_break[i].bpt_addr == addr)) { - kgdb_break[i].state = BP_REMOVED; - return 0; - } - } - return -ENOENT; -} - -int kgdb_isremovedbreak(unsigned long addr) -{ - int i; - - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if ((kgdb_break[i].state == BP_REMOVED) && - (kgdb_break[i].bpt_addr == addr)) - return 1; - } - return 0; -} - -static int remove_all_break(void) -{ - unsigned long addr; - int error; - int i; - - /* Clear memory breakpoints. */ - for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) { - if (kgdb_break[i].state != BP_ACTIVE) - goto setundefined; - addr = kgdb_break[i].bpt_addr; - error = kgdb_arch_remove_breakpoint(addr, - kgdb_break[i].saved_instr); - if (error) - printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n", - addr); -setundefined: - kgdb_break[i].state = BP_UNDEFINED; - } - - /* Clear hardware breakpoints. */ - if (arch_kgdb_ops.remove_all_hw_break) - arch_kgdb_ops.remove_all_hw_break(); - - return 0; -} - -/* - * Remap normal tasks to their real PID, - * CPU shadow threads are mapped to -CPU - 2 - */ -static inline int shadow_pid(int realpid) -{ - if (realpid) - return realpid; - - return -raw_smp_processor_id() - 2; -} - -static char gdbmsgbuf[BUFMAX + 1]; - -static void kgdb_msg_write(const char *s, int len) -{ - char *bufptr; - int wcount; - int i; - - /* 'O'utput */ - gdbmsgbuf[0] = 'O'; - - /* Fill and send buffers... */ - while (len > 0) { - bufptr = gdbmsgbuf + 1; - - /* Calculate how many this time */ - if ((len << 1) > (BUFMAX - 2)) - wcount = (BUFMAX - 2) >> 1; - else - wcount = len; - - /* Pack in hex chars */ - for (i = 0; i < wcount; i++) - bufptr = pack_hex_byte(bufptr, s[i]); - *bufptr = '\0'; - - /* Move up */ - s += wcount; - len -= wcount; - - /* Write packet */ - put_packet(gdbmsgbuf); - } -} - -/* - * Return true if there is a valid kgdb I/O module. Also if no - * debugger is attached a message can be printed to the console about - * waiting for the debugger to attach. - * - * The print_wait argument is only to be true when called from inside - * the core kgdb_handle_exception, because it will wait for the - * debugger to attach. - */ -static int kgdb_io_ready(int print_wait) -{ - if (!kgdb_io_ops) - return 0; - if (kgdb_connected) - return 1; - if (atomic_read(&kgdb_setting_breakpoint)) - return 1; - if (print_wait) - printk(KERN_CRIT "KGDB: Waiting for remote debugger\n"); - return 1; -} - -/* - * All the functions that start with gdb_cmd are the various - * operations to implement the handlers for the gdbserial protocol - * where KGDB is communicating with an external debugger - */ - -/* Handle the '?' status packets */ -static void gdb_cmd_status(struct kgdb_state *ks) -{ - /* - * We know that this packet is only sent - * during initial connect. So to be safe, - * we clear out our breakpoints now in case - * GDB is reconnecting. - */ - remove_all_break(); - - remcom_out_buffer[0] = 'S'; - pack_hex_byte(&remcom_out_buffer[1], ks->signo); -} - -/* Handle the 'g' get registers request */ -static void gdb_cmd_getregs(struct kgdb_state *ks) -{ - struct task_struct *thread; - void *local_debuggerinfo; - int i; - - thread = kgdb_usethread; - if (!thread) { - thread = kgdb_info[ks->cpu].task; - local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; - } else { - local_debuggerinfo = NULL; - for_each_online_cpu(i) { - /* - * Try to find the task on some other - * or possibly this node if we do not - * find the matching task then we try - * to approximate the results. - */ - if (thread == kgdb_info[i].task) - local_debuggerinfo = kgdb_info[i].debuggerinfo; - } - } - - /* - * All threads that don't have debuggerinfo should be - * in schedule() sleeping, since all other CPUs - * are in kgdb_wait, and thus have debuggerinfo. - */ - if (local_debuggerinfo) { - pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo); - } else { - /* - * Pull stuff saved during switch_to; nothing - * else is accessible (or even particularly - * relevant). - * - * This should be enough for a stack trace. - */ - sleeping_thread_to_gdb_regs(gdb_regs, thread); - } - kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES); -} - -/* Handle the 'G' set registers request */ -static void gdb_cmd_setregs(struct kgdb_state *ks) -{ - kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES); - - if (kgdb_usethread && kgdb_usethread != current) { - error_packet(remcom_out_buffer, -EINVAL); - } else { - gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs); - strcpy(remcom_out_buffer, "OK"); - } -} - -/* Handle the 'm' memory read bytes */ -static void gdb_cmd_memread(struct kgdb_state *ks) -{ - char *ptr = &remcom_in_buffer[1]; - unsigned long length; - unsigned long addr; - int err; - - if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' && - kgdb_hex2long(&ptr, &length) > 0) { - err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length); - if (err) - error_packet(remcom_out_buffer, err); - } else { - error_packet(remcom_out_buffer, -EINVAL); - } -} - -/* Handle the 'M' memory write bytes */ -static void gdb_cmd_memwrite(struct kgdb_state *ks) -{ - int err = write_mem_msg(0); - - if (err) - error_packet(remcom_out_buffer, err); - else - strcpy(remcom_out_buffer, "OK"); -} - -/* Handle the 'X' memory binary write bytes */ -static void gdb_cmd_binwrite(struct kgdb_state *ks) -{ - int err = write_mem_msg(1); - - if (err) - error_packet(remcom_out_buffer, err); - else - strcpy(remcom_out_buffer, "OK"); -} - -/* Handle the 'D' or 'k', detach or kill packets */ -static void gdb_cmd_detachkill(struct kgdb_state *ks) -{ - int error; - - /* The detach case */ - if (remcom_in_buffer[0] == 'D') { - error = remove_all_break(); - if (error < 0) { - error_packet(remcom_out_buffer, error); - } else { - strcpy(remcom_out_buffer, "OK"); - kgdb_connected = 0; - } - put_packet(remcom_out_buffer); - } else { - /* - * Assume the kill case, with no exit code checking, - * trying to force detach the debugger: - */ - remove_all_break(); - kgdb_connected = 0; - } -} - -/* Handle the 'R' reboot packets */ -static int gdb_cmd_reboot(struct kgdb_state *ks) -{ - /* For now, only honor R0 */ - if (strcmp(remcom_in_buffer, "R0") == 0) { - printk(KERN_CRIT "Executing emergency reboot\n"); - strcpy(remcom_out_buffer, "OK"); - put_packet(remcom_out_buffer); - - /* - * Execution should not return from - * machine_emergency_restart() - */ - machine_emergency_restart(); - kgdb_connected = 0; - - return 1; - } - return 0; -} - -/* Handle the 'q' query packets */ -static void gdb_cmd_query(struct kgdb_state *ks) -{ - struct task_struct *g; - struct task_struct *p; - unsigned char thref[8]; - char *ptr; - int i; - int cpu; - int finished = 0; - - switch (remcom_in_buffer[1]) { - case 's': - case 'f': - if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - - i = 0; - remcom_out_buffer[0] = 'm'; - ptr = remcom_out_buffer + 1; - if (remcom_in_buffer[1] == 'f') { - /* Each cpu is a shadow thread */ - for_each_online_cpu(cpu) { - ks->thr_query = 0; - int_to_threadref(thref, -cpu - 2); - pack_threadid(ptr, thref); - ptr += BUF_THREAD_ID_SIZE; - *(ptr++) = ','; - i++; - } - } - - do_each_thread(g, p) { - if (i >= ks->thr_query && !finished) { - int_to_threadref(thref, p->pid); - pack_threadid(ptr, thref); - ptr += BUF_THREAD_ID_SIZE; - *(ptr++) = ','; - ks->thr_query++; - if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) - finished = 1; - } - i++; - } while_each_thread(g, p); - - *(--ptr) = '\0'; - break; - - case 'C': - /* Current thread id */ - strcpy(remcom_out_buffer, "QC"); - ks->threadid = shadow_pid(current->pid); - int_to_threadref(thref, ks->threadid); - pack_threadid(remcom_out_buffer + 2, thref); - break; - case 'T': - if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - ks->threadid = 0; - ptr = remcom_in_buffer + 17; - kgdb_hex2long(&ptr, &ks->threadid); - if (!getthread(ks->linux_regs, ks->threadid)) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - if ((int)ks->threadid > 0) { - kgdb_mem2hex(getthread(ks->linux_regs, - ks->threadid)->comm, - remcom_out_buffer, 16); - } else { - static char tmpstr[23 + BUF_THREAD_ID_SIZE]; - - sprintf(tmpstr, "shadowCPU%d", - (int)(-ks->threadid - 2)); - kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); - } - break; - } -} - -/* Handle the 'H' task query packets */ -static void gdb_cmd_task(struct kgdb_state *ks) -{ - struct task_struct *thread; - char *ptr; - - switch (remcom_in_buffer[1]) { - case 'g': - ptr = &remcom_in_buffer[2]; - kgdb_hex2long(&ptr, &ks->threadid); - thread = getthread(ks->linux_regs, ks->threadid); - if (!thread && ks->threadid > 0) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - kgdb_usethread = thread; - ks->kgdb_usethreadid = ks->threadid; - strcpy(remcom_out_buffer, "OK"); - break; - case 'c': - ptr = &remcom_in_buffer[2]; - kgdb_hex2long(&ptr, &ks->threadid); - if (!ks->threadid) { - kgdb_contthread = NULL; - } else { - thread = getthread(ks->linux_regs, ks->threadid); - if (!thread && ks->threadid > 0) { - error_packet(remcom_out_buffer, -EINVAL); - break; - } - kgdb_contthread = thread; - } - strcpy(remcom_out_buffer, "OK"); - break; - } -} - -/* Handle the 'T' thread query packets */ -static void gdb_cmd_thread(struct kgdb_state *ks) -{ - char *ptr = &remcom_in_buffer[1]; - struct task_struct *thread; - - kgdb_hex2long(&ptr, &ks->threadid); - thread = getthread(ks->linux_regs, ks->threadid); - if (thread) - strcpy(remcom_out_buffer, "OK"); - else - error_packet(remcom_out_buffer, -EINVAL); -} - -/* Handle the 'z' or 'Z' breakpoint remove or set packets */ -static void gdb_cmd_break(struct kgdb_state *ks) -{ - /* - * Since GDB-5.3, it's been drafted that '0' is a software - * breakpoint, '1' is a hardware breakpoint, so let's do that. - */ - char *bpt_type = &remcom_in_buffer[1]; - char *ptr = &remcom_in_buffer[2]; - unsigned long addr; - unsigned long length; - int error = 0; - - if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') { - /* Unsupported */ - if (*bpt_type > '4') - return; - } else { - if (*bpt_type != '0' && *bpt_type != '1') - /* Unsupported. */ - return; - } - - /* - * Test if this is a hardware breakpoint, and - * if we support it: - */ - if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)) - /* Unsupported. */ - return; - - if (*(ptr++) != ',') { - error_packet(remcom_out_buffer, -EINVAL); - return; - } - if (!kgdb_hex2long(&ptr, &addr)) { - error_packet(remcom_out_buffer, -EINVAL); - return; - } - if (*(ptr++) != ',' || - !kgdb_hex2long(&ptr, &length)) { - error_packet(remcom_out_buffer, -EINVAL); - return; - } - - if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0') - error = kgdb_set_sw_break(addr); - else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0') - error = kgdb_remove_sw_break(addr); - else if (remcom_in_buffer[0] == 'Z') - error = arch_kgdb_ops.set_hw_breakpoint(addr, - (int)length, *bpt_type - '0'); - else if (remcom_in_buffer[0] == 'z') - error = arch_kgdb_ops.remove_hw_breakpoint(addr, - (int) length, *bpt_type - '0'); - - if (error == 0) - strcpy(remcom_out_buffer, "OK"); - else - error_packet(remcom_out_buffer, error); -} - -/* Handle the 'C' signal / exception passing packets */ -static int gdb_cmd_exception_pass(struct kgdb_state *ks) -{ - /* C09 == pass exception - * C15 == detach kgdb, pass exception - */ - if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') { - - ks->pass_exception = 1; - remcom_in_buffer[0] = 'c'; - - } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') { - - ks->pass_exception = 1; - remcom_in_buffer[0] = 'D'; - remove_all_break(); - kgdb_connected = 0; - return 1; - - } else { - kgdb_msg_write("KGDB only knows signal 9 (pass)" - " and 15 (pass and disconnect)\n" - "Executing a continue without signal passing\n", 0); - remcom_in_buffer[0] = 'c'; - } - - /* Indicate fall through */ - return -1; -} - -/* - * This function performs all gdbserial command procesing - */ -static int gdb_serial_stub(struct kgdb_state *ks) -{ - int error = 0; - int tmp; - - /* Clear the out buffer. */ - memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); - - if (kgdb_connected) { - unsigned char thref[8]; - char *ptr; - - /* Reply to host that an exception has occurred */ - ptr = remcom_out_buffer; - *ptr++ = 'T'; - ptr = pack_hex_byte(ptr, ks->signo); - ptr += strlen(strcpy(ptr, "thread:")); - int_to_threadref(thref, shadow_pid(current->pid)); - ptr = pack_threadid(ptr, thref); - *ptr++ = ';'; - put_packet(remcom_out_buffer); - } - - kgdb_usethread = kgdb_info[ks->cpu].task; - ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid); - ks->pass_exception = 0; - - while (1) { - error = 0; - - /* Clear the out buffer. */ - memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); - - get_packet(remcom_in_buffer); - - switch (remcom_in_buffer[0]) { - case '?': /* gdbserial status */ - gdb_cmd_status(ks); - break; - case 'g': /* return the value of the CPU registers */ - gdb_cmd_getregs(ks); - break; - case 'G': /* set the value of the CPU registers - return OK */ - gdb_cmd_setregs(ks); - break; - case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ - gdb_cmd_memread(ks); - break; - case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */ - gdb_cmd_memwrite(ks); - break; - case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */ - gdb_cmd_binwrite(ks); - break; - /* kill or detach. KGDB should treat this like a - * continue. - */ - case 'D': /* Debugger detach */ - case 'k': /* Debugger detach via kill */ - gdb_cmd_detachkill(ks); - goto default_handle; - case 'R': /* Reboot */ - if (gdb_cmd_reboot(ks)) - goto default_handle; - break; - case 'q': /* query command */ - gdb_cmd_query(ks); - break; - case 'H': /* task related */ - gdb_cmd_task(ks); - break; - case 'T': /* Query thread status */ - gdb_cmd_thread(ks); - break; - case 'z': /* Break point remove */ - case 'Z': /* Break point set */ - gdb_cmd_break(ks); - break; - case 'C': /* Exception passing */ - tmp = gdb_cmd_exception_pass(ks); - if (tmp > 0) - goto default_handle; - if (tmp == 0) - break; - /* Fall through on tmp < 0 */ - case 'c': /* Continue packet */ - case 's': /* Single step packet */ - if (kgdb_contthread && kgdb_contthread != current) { - /* Can't switch threads in kgdb */ - error_packet(remcom_out_buffer, -EINVAL); - break; - } - kgdb_activate_sw_breakpoints(); - /* Fall through to default processing */ - default: -default_handle: - error = kgdb_arch_handle_exception(ks->ex_vector, - ks->signo, - ks->err_code, - remcom_in_buffer, - remcom_out_buffer, - ks->linux_regs); - /* - * Leave cmd processing on error, detach, - * kill, continue, or single step. - */ - if (error >= 0 || remcom_in_buffer[0] == 'D' || - remcom_in_buffer[0] == 'k') { - error = 0; - goto kgdb_exit; - } - - } - - /* reply to the request */ - put_packet(remcom_out_buffer); - } - -kgdb_exit: - if (ks->pass_exception) - error = 1; - return error; -} - -static int kgdb_reenter_check(struct kgdb_state *ks) -{ - unsigned long addr; - - if (atomic_read(&kgdb_active) != raw_smp_processor_id()) - return 0; - - /* Panic on recursive debugger calls: */ - exception_level++; - addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs); - kgdb_deactivate_sw_breakpoints(); - - /* - * If the break point removed ok at the place exception - * occurred, try to recover and print a warning to the end - * user because the user planted a breakpoint in a place that - * KGDB needs in order to function. - */ - if (kgdb_remove_sw_break(addr) == 0) { - exception_level = 0; - kgdb_skipexception(ks->ex_vector, ks->linux_regs); - kgdb_activate_sw_breakpoints(); - printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n", - addr); - WARN_ON_ONCE(1); - - return 1; - } - remove_all_break(); - kgdb_skipexception(ks->ex_vector, ks->linux_regs); - - if (exception_level > 1) { - dump_stack(); - panic("Recursive entry to debugger"); - } - - printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n"); - dump_stack(); - panic("Recursive entry to debugger"); - - return 1; -} - -static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs) -{ - unsigned long flags; - int sstep_tries = 100; - int error = 0; - int i, cpu; - int trace_on = 0; -acquirelock: - /* - * Interrupts will be restored by the 'trap return' code, except when - * single stepping. - */ - local_irq_save(flags); - - cpu = ks->cpu; - kgdb_info[cpu].debuggerinfo = regs; - kgdb_info[cpu].task = current; - /* - * Make sure the above info reaches the primary CPU before - * our cpu_in_kgdb[] flag setting does: - */ - atomic_inc(&cpu_in_kgdb[cpu]); - - /* - * CPU will loop if it is a slave or request to become a kgdb - * master cpu and acquire the kgdb_active lock: - */ - while (1) { - if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) { - if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu) - break; - } else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) { - if (!atomic_read(&passive_cpu_wait[cpu])) - goto return_normal; - } else { -return_normal: - /* Return to normal operation by executing any - * hw breakpoint fixup. - */ - if (arch_kgdb_ops.correct_hw_break) - arch_kgdb_ops.correct_hw_break(); - if (trace_on) - tracing_on(); - atomic_dec(&cpu_in_kgdb[cpu]); - touch_softlockup_watchdog_sync(); - clocksource_touch_watchdog(); - local_irq_restore(flags); - return 0; - } - cpu_relax(); - } - - /* - * For single stepping, try to only enter on the processor - * that was single stepping. To gaurd against a deadlock, the - * kernel will only try for the value of sstep_tries before - * giving up and continuing on. - */ - if (atomic_read(&kgdb_cpu_doing_single_step) != -1 && - (kgdb_info[cpu].task && - kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) { - atomic_set(&kgdb_active, -1); - touch_softlockup_watchdog_sync(); - clocksource_touch_watchdog(); - local_irq_restore(flags); - - goto acquirelock; - } - - if (!kgdb_io_ready(1)) { - error = 1; - goto kgdb_restore; /* No I/O connection, so resume the system */ - } - - /* - * Don't enter if we have hit a removed breakpoint. - */ - if (kgdb_skipexception(ks->ex_vector, ks->linux_regs)) - goto kgdb_restore; - - /* Call the I/O driver's pre_exception routine */ - if (kgdb_io_ops->pre_exception) - kgdb_io_ops->pre_exception(); - - kgdb_disable_hw_debug(ks->linux_regs); - - /* - * Get the passive CPU lock which will hold all the non-primary - * CPU in a spin state while the debugger is active - */ - if (!kgdb_single_step) { - for (i = 0; i < NR_CPUS; i++) - atomic_inc(&passive_cpu_wait[i]); - } - -#ifdef CONFIG_SMP - /* Signal the other CPUs to enter kgdb_wait() */ - if ((!kgdb_single_step) && kgdb_do_roundup) - kgdb_roundup_cpus(flags); -#endif - - /* - * Wait for the other CPUs to be notified and be waiting for us: - */ - for_each_online_cpu(i) { - while (!atomic_read(&cpu_in_kgdb[i])) - cpu_relax(); - } - - /* - * At this point the primary processor is completely - * in the debugger and all secondary CPUs are quiescent - */ - kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code); - kgdb_deactivate_sw_breakpoints(); - kgdb_single_step = 0; - kgdb_contthread = current; - exception_level = 0; - trace_on = tracing_is_on(); - if (trace_on) - tracing_off(); - - /* Talk to debugger with gdbserial protocol */ - error = gdb_serial_stub(ks); - - /* Call the I/O driver's post_exception routine */ - if (kgdb_io_ops->post_exception) - kgdb_io_ops->post_exception(); - - atomic_dec(&cpu_in_kgdb[ks->cpu]); - - if (!kgdb_single_step) { - for (i = NR_CPUS-1; i >= 0; i--) - atomic_dec(&passive_cpu_wait[i]); - /* - * Wait till all the CPUs have quit - * from the debugger. - */ - for_each_online_cpu(i) { - while (atomic_read(&cpu_in_kgdb[i])) - cpu_relax(); - } - } - -kgdb_restore: - if (atomic_read(&kgdb_cpu_doing_single_step) != -1) { - int sstep_cpu = atomic_read(&kgdb_cpu_doing_single_step); - if (kgdb_info[sstep_cpu].task) - kgdb_sstep_pid = kgdb_info[sstep_cpu].task->pid; - else - kgdb_sstep_pid = 0; - } - if (trace_on) - tracing_on(); - /* Free kgdb_active */ - atomic_set(&kgdb_active, -1); - touch_softlockup_watchdog_sync(); - clocksource_touch_watchdog(); - local_irq_restore(flags); - - return error; -} - -/* - * kgdb_handle_exception() - main entry point from a kernel exception - * - * Locking hierarchy: - * interface locks, if any (begin_session) - * kgdb lock (kgdb_active) - */ -int -kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs) -{ - struct kgdb_state kgdb_var; - struct kgdb_state *ks = &kgdb_var; - int ret; - - ks->cpu = raw_smp_processor_id(); - ks->ex_vector = evector; - ks->signo = signo; - ks->ex_vector = evector; - ks->err_code = ecode; - ks->kgdb_usethreadid = 0; - ks->linux_regs = regs; - - if (kgdb_reenter_check(ks)) - return 0; /* Ouch, double exception ! */ - kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER; - ret = kgdb_cpu_enter(ks, regs); - kgdb_info[ks->cpu].exception_state &= ~DCPU_WANT_MASTER; - return ret; -} - -int kgdb_nmicallback(int cpu, void *regs) -{ -#ifdef CONFIG_SMP - struct kgdb_state kgdb_var; - struct kgdb_state *ks = &kgdb_var; - - memset(ks, 0, sizeof(struct kgdb_state)); - ks->cpu = cpu; - ks->linux_regs = regs; - - if (!atomic_read(&cpu_in_kgdb[cpu]) && - atomic_read(&kgdb_active) != -1 && - atomic_read(&kgdb_active) != cpu) { - kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE; - kgdb_cpu_enter(ks, regs); - kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE; - return 0; - } -#endif - return 1; -} - -static void kgdb_console_write(struct console *co, const char *s, - unsigned count) -{ - unsigned long flags; - - /* If we're debugging, or KGDB has not connected, don't try - * and print. */ - if (!kgdb_connected || atomic_read(&kgdb_active) != -1) - return; - - local_irq_save(flags); - kgdb_msg_write(s, count); - local_irq_restore(flags); -} - -static struct console kgdbcons = { - .name = "kgdb", - .write = kgdb_console_write, - .flags = CON_PRINTBUFFER | CON_ENABLED, - .index = -1, -}; - -#ifdef CONFIG_MAGIC_SYSRQ -static void sysrq_handle_gdb(int key, struct tty_struct *tty) -{ - if (!kgdb_io_ops) { - printk(KERN_CRIT "ERROR: No KGDB I/O module available\n"); - return; - } - if (!kgdb_connected) - printk(KERN_CRIT "Entering KGDB\n"); - - kgdb_breakpoint(); -} - -static struct sysrq_key_op sysrq_gdb_op = { - .handler = sysrq_handle_gdb, - .help_msg = "debug(G)", - .action_msg = "DEBUG", -}; -#endif - -static void kgdb_register_callbacks(void) -{ - if (!kgdb_io_module_registered) { - kgdb_io_module_registered = 1; - kgdb_arch_init(); -#ifdef CONFIG_MAGIC_SYSRQ - register_sysrq_key('g', &sysrq_gdb_op); -#endif - if (kgdb_use_con && !kgdb_con_registered) { - register_console(&kgdbcons); - kgdb_con_registered = 1; - } - } -} - -static void kgdb_unregister_callbacks(void) -{ - /* - * When this routine is called KGDB should unregister from the - * panic handler and clean up, making sure it is not handling any - * break exceptions at the time. - */ - if (kgdb_io_module_registered) { - kgdb_io_module_registered = 0; - kgdb_arch_exit(); -#ifdef CONFIG_MAGIC_SYSRQ - unregister_sysrq_key('g', &sysrq_gdb_op); -#endif - if (kgdb_con_registered) { - unregister_console(&kgdbcons); - kgdb_con_registered = 0; - } - } -} - -static void kgdb_initial_breakpoint(void) -{ - kgdb_break_asap = 0; - - printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n"); - kgdb_breakpoint(); -} - -/** - * kgdb_register_io_module - register KGDB IO module - * @new_kgdb_io_ops: the io ops vector - * - * Register it with the KGDB core. - */ -int kgdb_register_io_module(struct kgdb_io *new_kgdb_io_ops) -{ - int err; - - spin_lock(&kgdb_registration_lock); - - if (kgdb_io_ops) { - spin_unlock(&kgdb_registration_lock); - - printk(KERN_ERR "kgdb: Another I/O driver is already " - "registered with KGDB.\n"); - return -EBUSY; - } - - if (new_kgdb_io_ops->init) { - err = new_kgdb_io_ops->init(); - if (err) { - spin_unlock(&kgdb_registration_lock); - return err; - } - } - - kgdb_io_ops = new_kgdb_io_ops; - - spin_unlock(&kgdb_registration_lock); - - printk(KERN_INFO "kgdb: Registered I/O driver %s.\n", - new_kgdb_io_ops->name); - - /* Arm KGDB now. */ - kgdb_register_callbacks(); - - if (kgdb_break_asap) - kgdb_initial_breakpoint(); - - return 0; -} -EXPORT_SYMBOL_GPL(kgdb_register_io_module); - -/** - * kkgdb_unregister_io_module - unregister KGDB IO module - * @old_kgdb_io_ops: the io ops vector - * - * Unregister it with the KGDB core. - */ -void kgdb_unregister_io_module(struct kgdb_io *old_kgdb_io_ops) -{ - BUG_ON(kgdb_connected); - - /* - * KGDB is no longer able to communicate out, so - * unregister our callbacks and reset state. - */ - kgdb_unregister_callbacks(); - - spin_lock(&kgdb_registration_lock); - - WARN_ON_ONCE(kgdb_io_ops != old_kgdb_io_ops); - kgdb_io_ops = NULL; - - spin_unlock(&kgdb_registration_lock); - - printk(KERN_INFO - "kgdb: Unregistered I/O driver %s, debugger disabled.\n", - old_kgdb_io_ops->name); -} -EXPORT_SYMBOL_GPL(kgdb_unregister_io_module); - -/** - * kgdb_breakpoint - generate breakpoint exception - * - * This function will generate a breakpoint exception. It is used at the - * beginning of a program to sync up with a debugger and can be used - * otherwise as a quick means to stop program execution and "break" into - * the debugger. - */ -void kgdb_breakpoint(void) -{ - atomic_inc(&kgdb_setting_breakpoint); - wmb(); /* Sync point before breakpoint */ - arch_kgdb_breakpoint(); - wmb(); /* Sync point after breakpoint */ - atomic_dec(&kgdb_setting_breakpoint); -} -EXPORT_SYMBOL_GPL(kgdb_breakpoint); - -static int __init opt_kgdb_wait(char *str) -{ - kgdb_break_asap = 1; - - if (kgdb_io_module_registered) - kgdb_initial_breakpoint(); - - return 0; -} - -early_param("kgdbwait", opt_kgdb_wait); diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index 21fe3c4..0b624e7 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -138,7 +138,8 @@ extern const void __start_notes __attribute__((weak)); extern const void __stop_notes __attribute__((weak)); #define notes_size (&__stop_notes - &__start_notes) -static ssize_t notes_read(struct kobject *kobj, struct bin_attribute *bin_attr, +static ssize_t notes_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { memcpy(buf, &__start_notes + off, count); diff --git a/kernel/lockdep.c b/kernel/lockdep.c index ec21304..5428679 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -2711,6 +2711,8 @@ void lockdep_init_map(struct lockdep_map *lock, const char *name, } EXPORT_SYMBOL_GPL(lockdep_init_map); +struct lock_class_key __lockdep_no_validate__; + /* * This gets called for every mutex_lock*()/spin_lock*() operation. * We maintain the dependency maps and validate the locking attempt: @@ -2745,6 +2747,9 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass, return 0; } + if (lock->key == &__lockdep_no_validate__) + check = 1; + if (!subclass) class = lock->class_cache; /* diff --git a/kernel/module.c b/kernel/module.c index e256458..333fbcc 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -77,6 +77,10 @@ DEFINE_MUTEX(module_mutex); EXPORT_SYMBOL_GPL(module_mutex); static LIST_HEAD(modules); +#ifdef CONFIG_KGDB_KDB +struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */ +#endif /* CONFIG_KGDB_KDB */ + /* Block module loading/unloading? */ int modules_disabled = 0; @@ -176,8 +180,6 @@ extern const struct kernel_symbol __start___ksymtab_gpl[]; extern const struct kernel_symbol __stop___ksymtab_gpl[]; extern const struct kernel_symbol __start___ksymtab_gpl_future[]; extern const struct kernel_symbol __stop___ksymtab_gpl_future[]; -extern const struct kernel_symbol __start___ksymtab_gpl_future[]; -extern const struct kernel_symbol __stop___ksymtab_gpl_future[]; extern const unsigned long __start___kcrctab[]; extern const unsigned long __start___kcrctab_gpl[]; extern const unsigned long __start___kcrctab_gpl_future[]; @@ -1182,7 +1184,7 @@ struct module_notes_attrs { struct bin_attribute attrs[0]; }; -static ssize_t module_notes_read(struct kobject *kobj, +static ssize_t module_notes_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t pos, size_t count) { diff --git a/kernel/padata.c b/kernel/padata.c index fd03513..b1c9857 100644 --- a/kernel/padata.c +++ b/kernel/padata.c @@ -29,7 +29,7 @@ #include <linux/rcupdate.h> #define MAX_SEQ_NR INT_MAX - NR_CPUS -#define MAX_OBJ_NUM 10000 * NR_CPUS +#define MAX_OBJ_NUM 1000 static int padata_index_to_cpu(struct parallel_data *pd, int cpu_index) { @@ -88,7 +88,7 @@ static void padata_parallel_worker(struct work_struct *work) local_bh_enable(); } -/* +/** * padata_do_parallel - padata parallelization function * * @pinst: padata instance @@ -152,6 +152,23 @@ out: } EXPORT_SYMBOL(padata_do_parallel); +/* + * padata_get_next - Get the next object that needs serialization. + * + * Return values are: + * + * A pointer to the control struct of the next object that needs + * serialization, if present in one of the percpu reorder queues. + * + * NULL, if all percpu reorder queues are empty. + * + * -EINPROGRESS, if the next object that needs serialization will + * be parallel processed by another cpu and is not yet present in + * the cpu's reorder queue. + * + * -ENODATA, if this cpu has to do the parallel processing for + * the next object. + */ static struct padata_priv *padata_get_next(struct parallel_data *pd) { int cpu, num_cpus, empty, calc_seq_nr; @@ -173,7 +190,7 @@ static struct padata_priv *padata_get_next(struct parallel_data *pd) /* * Calculate the seq_nr of the object that should be - * next in this queue. + * next in this reorder queue. */ overrun = 0; calc_seq_nr = (atomic_read(&queue->num_obj) * num_cpus) @@ -231,7 +248,8 @@ static struct padata_priv *padata_get_next(struct parallel_data *pd) goto out; } - if (next_nr % num_cpus == next_queue->cpu_index) { + queue = per_cpu_ptr(pd->queue, smp_processor_id()); + if (queue->cpu_index == next_queue->cpu_index) { padata = ERR_PTR(-ENODATA); goto out; } @@ -247,19 +265,40 @@ static void padata_reorder(struct parallel_data *pd) struct padata_queue *queue; struct padata_instance *pinst = pd->pinst; -try_again: + /* + * We need to ensure that only one cpu can work on dequeueing of + * the reorder queue the time. Calculating in which percpu reorder + * queue the next object will arrive takes some time. A spinlock + * would be highly contended. Also it is not clear in which order + * the objects arrive to the reorder queues. So a cpu could wait to + * get the lock just to notice that there is nothing to do at the + * moment. Therefore we use a trylock and let the holder of the lock + * care for all the objects enqueued during the holdtime of the lock. + */ if (!spin_trylock_bh(&pd->lock)) - goto out; + return; while (1) { padata = padata_get_next(pd); + /* + * All reorder queues are empty, or the next object that needs + * serialization is parallel processed by another cpu and is + * still on it's way to the cpu's reorder queue, nothing to + * do for now. + */ if (!padata || PTR_ERR(padata) == -EINPROGRESS) break; + /* + * This cpu has to do the parallel processing of the next + * object. It's waiting in the cpu's parallelization queue, + * so exit imediately. + */ if (PTR_ERR(padata) == -ENODATA) { + del_timer(&pd->timer); spin_unlock_bh(&pd->lock); - goto out; + return; } queue = per_cpu_ptr(pd->queue, padata->cb_cpu); @@ -273,13 +312,27 @@ try_again: spin_unlock_bh(&pd->lock); - if (atomic_read(&pd->reorder_objects)) - goto try_again; + /* + * The next object that needs serialization might have arrived to + * the reorder queues in the meantime, we will be called again + * from the timer function if noone else cares for it. + */ + if (atomic_read(&pd->reorder_objects) + && !(pinst->flags & PADATA_RESET)) + mod_timer(&pd->timer, jiffies + HZ); + else + del_timer(&pd->timer); -out: return; } +static void padata_reorder_timer(unsigned long arg) +{ + struct parallel_data *pd = (struct parallel_data *)arg; + + padata_reorder(pd); +} + static void padata_serial_worker(struct work_struct *work) { struct padata_queue *queue; @@ -308,7 +361,7 @@ static void padata_serial_worker(struct work_struct *work) local_bh_enable(); } -/* +/** * padata_do_serial - padata serialization function * * @padata: object to be serialized. @@ -338,6 +391,7 @@ void padata_do_serial(struct padata_priv *padata) } EXPORT_SYMBOL(padata_do_serial); +/* Allocate and initialize the internal cpumask dependend resources. */ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst, const struct cpumask *cpumask) { @@ -358,17 +412,15 @@ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst, if (!alloc_cpumask_var(&pd->cpumask, GFP_KERNEL)) goto err_free_queue; - for_each_possible_cpu(cpu) { + cpumask_and(pd->cpumask, cpumask, cpu_active_mask); + + for_each_cpu(cpu, pd->cpumask) { queue = per_cpu_ptr(pd->queue, cpu); queue->pd = pd; - if (cpumask_test_cpu(cpu, cpumask) - && cpumask_test_cpu(cpu, cpu_active_mask)) { - queue->cpu_index = cpu_index; - cpu_index++; - } else - queue->cpu_index = -1; + queue->cpu_index = cpu_index; + cpu_index++; INIT_LIST_HEAD(&queue->reorder.list); INIT_LIST_HEAD(&queue->parallel.list); @@ -382,11 +434,10 @@ static struct parallel_data *padata_alloc_pd(struct padata_instance *pinst, atomic_set(&queue->num_obj, 0); } - cpumask_and(pd->cpumask, cpumask, cpu_active_mask); - num_cpus = cpumask_weight(pd->cpumask); pd->max_seq_nr = (MAX_SEQ_NR / num_cpus) * num_cpus - 1; + setup_timer(&pd->timer, padata_reorder_timer, (unsigned long)pd); atomic_set(&pd->seq_nr, -1); atomic_set(&pd->reorder_objects, 0); atomic_set(&pd->refcnt, 0); @@ -410,6 +461,31 @@ static void padata_free_pd(struct parallel_data *pd) kfree(pd); } +/* Flush all objects out of the padata queues. */ +static void padata_flush_queues(struct parallel_data *pd) +{ + int cpu; + struct padata_queue *queue; + + for_each_cpu(cpu, pd->cpumask) { + queue = per_cpu_ptr(pd->queue, cpu); + flush_work(&queue->pwork); + } + + del_timer_sync(&pd->timer); + + if (atomic_read(&pd->reorder_objects)) + padata_reorder(pd); + + for_each_cpu(cpu, pd->cpumask) { + queue = per_cpu_ptr(pd->queue, cpu); + flush_work(&queue->swork); + } + + BUG_ON(atomic_read(&pd->refcnt) != 0); +} + +/* Replace the internal control stucture with a new one. */ static void padata_replace(struct padata_instance *pinst, struct parallel_data *pd_new) { @@ -421,17 +497,13 @@ static void padata_replace(struct padata_instance *pinst, synchronize_rcu(); - while (atomic_read(&pd_old->refcnt) != 0) - yield(); - - flush_workqueue(pinst->wq); - + padata_flush_queues(pd_old); padata_free_pd(pd_old); pinst->flags &= ~PADATA_RESET; } -/* +/** * padata_set_cpumask - set the cpumask that padata should use * * @pinst: padata instance @@ -443,10 +515,10 @@ int padata_set_cpumask(struct padata_instance *pinst, struct parallel_data *pd; int err = 0; - might_sleep(); - mutex_lock(&pinst->lock); + get_online_cpus(); + pd = padata_alloc_pd(pinst, cpumask); if (!pd) { err = -ENOMEM; @@ -458,6 +530,8 @@ int padata_set_cpumask(struct padata_instance *pinst, padata_replace(pinst, pd); out: + put_online_cpus(); + mutex_unlock(&pinst->lock); return err; @@ -479,7 +553,7 @@ static int __padata_add_cpu(struct padata_instance *pinst, int cpu) return 0; } -/* +/** * padata_add_cpu - add a cpu to the padata cpumask * * @pinst: padata instance @@ -489,12 +563,12 @@ int padata_add_cpu(struct padata_instance *pinst, int cpu) { int err; - might_sleep(); - mutex_lock(&pinst->lock); + get_online_cpus(); cpumask_set_cpu(cpu, pinst->cpumask); err = __padata_add_cpu(pinst, cpu); + put_online_cpus(); mutex_unlock(&pinst->lock); @@ -517,7 +591,7 @@ static int __padata_remove_cpu(struct padata_instance *pinst, int cpu) return 0; } -/* +/** * padata_remove_cpu - remove a cpu from the padata cpumask * * @pinst: padata instance @@ -527,12 +601,12 @@ int padata_remove_cpu(struct padata_instance *pinst, int cpu) { int err; - might_sleep(); - mutex_lock(&pinst->lock); + get_online_cpus(); cpumask_clear_cpu(cpu, pinst->cpumask); err = __padata_remove_cpu(pinst, cpu); + put_online_cpus(); mutex_unlock(&pinst->lock); @@ -540,38 +614,35 @@ int padata_remove_cpu(struct padata_instance *pinst, int cpu) } EXPORT_SYMBOL(padata_remove_cpu); -/* +/** * padata_start - start the parallel processing * * @pinst: padata instance to start */ void padata_start(struct padata_instance *pinst) { - might_sleep(); - mutex_lock(&pinst->lock); pinst->flags |= PADATA_INIT; mutex_unlock(&pinst->lock); } EXPORT_SYMBOL(padata_start); -/* +/** * padata_stop - stop the parallel processing * * @pinst: padata instance to stop */ void padata_stop(struct padata_instance *pinst) { - might_sleep(); - mutex_lock(&pinst->lock); pinst->flags &= ~PADATA_INIT; mutex_unlock(&pinst->lock); } EXPORT_SYMBOL(padata_stop); -static int __cpuinit padata_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) +#ifdef CONFIG_HOTPLUG_CPU +static int padata_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) { int err; struct padata_instance *pinst; @@ -621,8 +692,9 @@ static int __cpuinit padata_cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } +#endif -/* +/** * padata_alloc - allocate and initialize a padata instance * * @cpumask: cpumask that padata uses for parallelization @@ -631,7 +703,6 @@ static int __cpuinit padata_cpu_callback(struct notifier_block *nfb, struct padata_instance *padata_alloc(const struct cpumask *cpumask, struct workqueue_struct *wq) { - int err; struct padata_instance *pinst; struct parallel_data *pd; @@ -639,6 +710,8 @@ struct padata_instance *padata_alloc(const struct cpumask *cpumask, if (!pinst) goto err; + get_online_cpus(); + pd = padata_alloc_pd(pinst, cpumask); if (!pd) goto err_free_inst; @@ -654,31 +727,32 @@ struct padata_instance *padata_alloc(const struct cpumask *cpumask, pinst->flags = 0; +#ifdef CONFIG_HOTPLUG_CPU pinst->cpu_notifier.notifier_call = padata_cpu_callback; pinst->cpu_notifier.priority = 0; - err = register_hotcpu_notifier(&pinst->cpu_notifier); - if (err) - goto err_free_cpumask; + register_hotcpu_notifier(&pinst->cpu_notifier); +#endif + + put_online_cpus(); mutex_init(&pinst->lock); return pinst; -err_free_cpumask: - free_cpumask_var(pinst->cpumask); err_free_pd: padata_free_pd(pd); err_free_inst: kfree(pinst); + put_online_cpus(); err: return NULL; } EXPORT_SYMBOL(padata_alloc); -/* +/** * padata_free - free a padata instance * - * @ padata_inst: padata instance to free + * @padata_inst: padata instance to free */ void padata_free(struct padata_instance *pinst) { @@ -686,10 +760,13 @@ void padata_free(struct padata_instance *pinst) synchronize_rcu(); - while (atomic_read(&pinst->pd->refcnt) != 0) - yield(); - +#ifdef CONFIG_HOTPLUG_CPU unregister_hotcpu_notifier(&pinst->cpu_notifier); +#endif + get_online_cpus(); + padata_flush_queues(pinst->pd); + put_online_cpus(); + padata_free_pd(pinst->pd); free_cpumask_var(pinst->cpumask); kfree(pinst); diff --git a/kernel/panic.c b/kernel/panic.c index 13d966b..dbe13db 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -178,6 +178,7 @@ static const struct tnt tnts[] = { { TAINT_OVERRIDDEN_ACPI_TABLE, 'A', ' ' }, { TAINT_WARN, 'W', ' ' }, { TAINT_CRAP, 'C', ' ' }, + { TAINT_FIRMWARE_WORKAROUND, 'I', ' ' }, }; /** @@ -194,6 +195,7 @@ static const struct tnt tnts[] = { * 'A' - ACPI table overridden. * 'W' - Taint on warning. * 'C' - modules from drivers/staging are loaded. + * 'I' - Working around severe firmware bug. * * The string is overwritten by the next call to print_tainted(). */ @@ -365,7 +367,8 @@ struct slowpath_args { va_list args; }; -static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args) +static void warn_slowpath_common(const char *file, int line, void *caller, + unsigned taint, struct slowpath_args *args) { const char *board; @@ -381,7 +384,7 @@ static void warn_slowpath_common(const char *file, int line, void *caller, struc print_modules(); dump_stack(); print_oops_end_marker(); - add_taint(TAINT_WARN); + add_taint(taint); } void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) @@ -390,14 +393,29 @@ void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) args.fmt = fmt; va_start(args.args, fmt); - warn_slowpath_common(file, line, __builtin_return_address(0), &args); + warn_slowpath_common(file, line, __builtin_return_address(0), + TAINT_WARN, &args); va_end(args.args); } EXPORT_SYMBOL(warn_slowpath_fmt); +void warn_slowpath_fmt_taint(const char *file, int line, + unsigned taint, const char *fmt, ...) +{ + struct slowpath_args args; + + args.fmt = fmt; + va_start(args.args, fmt); + warn_slowpath_common(file, line, __builtin_return_address(0), + taint, &args); + va_end(args.args); +} +EXPORT_SYMBOL(warn_slowpath_fmt_taint); + void warn_slowpath_null(const char *file, int line) { - warn_slowpath_common(file, line, __builtin_return_address(0), NULL); + warn_slowpath_common(file, line, __builtin_return_address(0), + TAINT_WARN, NULL); } EXPORT_SYMBOL(warn_slowpath_null); #endif diff --git a/kernel/printk.c b/kernel/printk.c index 75077ad..444b770 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -33,6 +33,7 @@ #include <linux/bootmem.h> #include <linux/syscalls.h> #include <linux/kexec.h> +#include <linux/kdb.h> #include <linux/ratelimit.h> #include <linux/kmsg_dump.h> #include <linux/syslog.h> @@ -413,6 +414,22 @@ SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len) return do_syslog(type, buf, len, SYSLOG_FROM_CALL); } +#ifdef CONFIG_KGDB_KDB +/* kdb dmesg command needs access to the syslog buffer. do_syslog() + * uses locks so it cannot be used during debugging. Just tell kdb + * where the start and end of the physical and logical logs are. This + * is equivalent to do_syslog(3). + */ +void kdb_syslog_data(char *syslog_data[4]) +{ + syslog_data[0] = log_buf; + syslog_data[1] = log_buf + log_buf_len; + syslog_data[2] = log_buf + log_end - + (logged_chars < log_buf_len ? logged_chars : log_buf_len); + syslog_data[3] = log_buf + log_end; +} +#endif /* CONFIG_KGDB_KDB */ + /* * Call the console drivers on a range of log_buf */ @@ -586,6 +603,14 @@ asmlinkage int printk(const char *fmt, ...) va_list args; int r; +#ifdef CONFIG_KGDB_KDB + if (unlikely(kdb_trap_printk)) { + va_start(args, fmt); + r = vkdb_printf(fmt, args); + va_end(args); + return r; + } +#endif va_start(args, fmt); r = vprintk(fmt, args); va_end(args); diff --git a/kernel/relay.c b/kernel/relay.c index 3d97f28..4268287 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -1231,8 +1231,8 @@ static ssize_t subbuf_splice_actor(struct file *in, size_t read_subbuf = read_start / subbuf_size; size_t padding = rbuf->padding[read_subbuf]; size_t nonpad_end = read_subbuf * subbuf_size + subbuf_size - padding; - struct page *pages[PIPE_BUFFERS]; - struct partial_page partial[PIPE_BUFFERS]; + struct page *pages[PIPE_DEF_BUFFERS]; + struct partial_page partial[PIPE_DEF_BUFFERS]; struct splice_pipe_desc spd = { .pages = pages, .nr_pages = 0, @@ -1245,6 +1245,8 @@ static ssize_t subbuf_splice_actor(struct file *in, if (rbuf->subbufs_produced == rbuf->subbufs_consumed) return 0; + if (splice_grow_spd(pipe, &spd)) + return -ENOMEM; /* * Adjust read len, if longer than what is available @@ -1255,7 +1257,7 @@ static ssize_t subbuf_splice_actor(struct file *in, subbuf_pages = rbuf->chan->alloc_size >> PAGE_SHIFT; pidx = (read_start / PAGE_SIZE) % subbuf_pages; poff = read_start & ~PAGE_MASK; - nr_pages = min_t(unsigned int, subbuf_pages, PIPE_BUFFERS); + nr_pages = min_t(unsigned int, subbuf_pages, pipe->buffers); for (total_len = 0; spd.nr_pages < nr_pages; spd.nr_pages++) { unsigned int this_len, this_end, private; @@ -1289,16 +1291,19 @@ static ssize_t subbuf_splice_actor(struct file *in, } } + ret = 0; if (!spd.nr_pages) - return 0; + goto out; ret = *nonpad_ret = splice_to_pipe(pipe, &spd); if (ret < 0 || ret < total_len) - return ret; + goto out; if (read_start + ret == nonpad_end) ret += padding; +out: + splice_shrink_spd(pipe, &spd); return ret; } diff --git a/kernel/resource.c b/kernel/resource.c index 9c358e2..7b36976 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -15,6 +15,7 @@ #include <linux/spinlock.h> #include <linux/fs.h> #include <linux/proc_fs.h> +#include <linux/sched.h> #include <linux/seq_file.h> #include <linux/device.h> #include <linux/pfn.h> @@ -681,6 +682,8 @@ resource_size_t resource_alignment(struct resource *res) * release_region releases a matching busy region. */ +static DECLARE_WAIT_QUEUE_HEAD(muxed_resource_wait); + /** * __request_region - create a new busy resource region * @parent: parent resource descriptor @@ -693,6 +696,7 @@ struct resource * __request_region(struct resource *parent, resource_size_t start, resource_size_t n, const char *name, int flags) { + DECLARE_WAITQUEUE(wait, current); struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL); if (!res) @@ -717,7 +721,15 @@ struct resource * __request_region(struct resource *parent, if (!(conflict->flags & IORESOURCE_BUSY)) continue; } - + if (conflict->flags & flags & IORESOURCE_MUXED) { + add_wait_queue(&muxed_resource_wait, &wait); + write_unlock(&resource_lock); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule(); + remove_wait_queue(&muxed_resource_wait, &wait); + write_lock(&resource_lock); + continue; + } /* Uhhuh, that didn't work out.. */ kfree(res); res = NULL; @@ -791,6 +803,8 @@ void __release_region(struct resource *parent, resource_size_t start, break; *p = res->sibling; write_unlock(&resource_lock); + if (res->flags & IORESOURCE_MUXED) + wake_up(&muxed_resource_wait); kfree(res); return; } diff --git a/kernel/sched.c b/kernel/sched.c index d9c0368..054a601 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7759,9 +7759,9 @@ void normalize_rt_tasks(void) #endif /* CONFIG_MAGIC_SYSRQ */ -#ifdef CONFIG_IA64 +#if defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) /* - * These functions are only useful for the IA64 MCA handling. + * These functions are only useful for the IA64 MCA handling, or kdb. * * They can only be called when the whole system has been * stopped - every CPU needs to be quiescent, and no scheduling @@ -7781,6 +7781,9 @@ struct task_struct *curr_task(int cpu) return cpu_curr(cpu); } +#endif /* defined(CONFIG_IA64) || defined(CONFIG_KGDB_KDB) */ + +#ifdef CONFIG_IA64 /** * set_curr_task - set the current task for a given cpu. * @cpu: the processor in question. diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 5b49613..906a0f7 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -41,6 +41,7 @@ unsigned long long __attribute__((weak)) sched_clock(void) return (unsigned long long)(jiffies - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); } +EXPORT_SYMBOL_GPL(sched_clock); static __read_mostly int sched_clock_running; diff --git a/kernel/signal.c b/kernel/signal.c index dbd7fe0..825a3f2 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -2735,3 +2735,43 @@ void __init signals_init(void) { sigqueue_cachep = KMEM_CACHE(sigqueue, SLAB_PANIC); } + +#ifdef CONFIG_KGDB_KDB +#include <linux/kdb.h> +/* + * kdb_send_sig_info - Allows kdb to send signals without exposing + * signal internals. This function checks if the required locks are + * available before calling the main signal code, to avoid kdb + * deadlocks. + */ +void +kdb_send_sig_info(struct task_struct *t, struct siginfo *info) +{ + static struct task_struct *kdb_prev_t; + int sig, new_t; + if (!spin_trylock(&t->sighand->siglock)) { + kdb_printf("Can't do kill command now.\n" + "The sigmask lock is held somewhere else in " + "kernel, try again later\n"); + return; + } + spin_unlock(&t->sighand->siglock); + new_t = kdb_prev_t != t; + kdb_prev_t = t; + if (t->state != TASK_RUNNING && new_t) { + kdb_printf("Process is not RUNNING, sending a signal from " + "kdb risks deadlock\n" + "on the run queue locks. " + "The signal has _not_ been sent.\n" + "Reissue the kill command if you want to risk " + "the deadlock.\n"); + return; + } + sig = info->si_signo; + if (send_sig_info(sig, info, t)) + kdb_printf("Fail to deliver Signal %d to process %d.\n", + sig, t->pid); + else + kdb_printf("Signal %d is sent to process %d.\n", sig, t->pid); +} +#endif /* CONFIG_KGDB_KDB */ diff --git a/kernel/sysctl.c b/kernel/sysctl.c index f948f20..997080f 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -37,6 +37,7 @@ #include <linux/highuid.h> #include <linux/writeback.h> #include <linux/ratelimit.h> +#include <linux/compaction.h> #include <linux/hugetlb.h> #include <linux/initrd.h> #include <linux/key.h> @@ -52,6 +53,7 @@ #include <linux/slow-work.h> #include <linux/perf_event.h> #include <linux/kprobes.h> +#include <linux/pipe_fs_i.h> #include <asm/uaccess.h> #include <asm/processor.h> @@ -261,6 +263,11 @@ static int min_sched_shares_ratelimit = 100000; /* 100 usec */ static int max_sched_shares_ratelimit = NSEC_PER_SEC; /* 1 second */ #endif +#ifdef CONFIG_COMPACTION +static int min_extfrag_threshold; +static int max_extfrag_threshold = 1000; +#endif + static struct ctl_table kern_table[] = { { .procname = "sched_child_runs_first", @@ -1120,6 +1127,25 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = drop_caches_sysctl_handler, }, +#ifdef CONFIG_COMPACTION + { + .procname = "compact_memory", + .data = &sysctl_compact_memory, + .maxlen = sizeof(int), + .mode = 0200, + .proc_handler = sysctl_compaction_handler, + }, + { + .procname = "extfrag_threshold", + .data = &sysctl_extfrag_threshold, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = sysctl_extfrag_handler, + .extra1 = &min_extfrag_threshold, + .extra2 = &max_extfrag_threshold, + }, + +#endif /* CONFIG_COMPACTION */ { .procname = "min_free_kbytes", .data = &min_free_kbytes, @@ -1444,6 +1470,14 @@ static struct ctl_table fs_table[] = { .child = binfmt_misc_table, }, #endif + { + .procname = "pipe-max-pages", + .data = &pipe_max_pages, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .extra1 = &two, + }, /* * NOTE: do not add new entries to this table unless you have read * Documentation/sysctl/ctl_unnumbered.txt @@ -2083,20 +2117,20 @@ static void proc_skip_char(char **buf, size_t *size, const char v) #define TMPBUFLEN 22 /** - * proc_get_long - reads an ASCII formated integer from a user buffer + * proc_get_long - reads an ASCII formatted integer from a user buffer * - * @buf - a kernel buffer - * @size - size of the kernel buffer - * @val - this is where the number will be stored - * @neg - set to %TRUE if number is negative - * @perm_tr - a vector which contains the allowed trailers - * @perm_tr_len - size of the perm_tr vector - * @tr - pointer to store the trailer character + * @buf: a kernel buffer + * @size: size of the kernel buffer + * @val: this is where the number will be stored + * @neg: set to %TRUE if number is negative + * @perm_tr: a vector which contains the allowed trailers + * @perm_tr_len: size of the perm_tr vector + * @tr: pointer to store the trailer character * - * In case of success 0 is returned and buf and size are updated with - * the amount of bytes read. If tr is non NULL and a trailing - * character exist (size is non zero after returning from this - * function) tr is updated with the trailing character. + * In case of success %0 is returned and @buf and @size are updated with + * the amount of bytes read. If @tr is non-NULL and a trailing + * character exists (size is non-zero after returning from this + * function), @tr is updated with the trailing character. */ static int proc_get_long(char **buf, size_t *size, unsigned long *val, bool *neg, @@ -2147,15 +2181,15 @@ static int proc_get_long(char **buf, size_t *size, } /** - * proc_put_long - coverts an integer to a decimal ASCII formated string + * proc_put_long - converts an integer to a decimal ASCII formatted string * - * @buf - the user buffer - * @size - the size of the user buffer - * @val - the integer to be converted - * @neg - sign of the number, %TRUE for negative + * @buf: the user buffer + * @size: the size of the user buffer + * @val: the integer to be converted + * @neg: sign of the number, %TRUE for negative * - * In case of success 0 is returned and buf and size are updated with - * the amount of bytes read. + * In case of success %0 is returned and @buf and @size are updated with + * the amount of bytes written. */ static int proc_put_long(void __user **buf, size_t *size, unsigned long val, bool neg) diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c index 937d31d..1357c57 100644 --- a/kernel/sysctl_binary.c +++ b/kernel/sysctl_binary.c @@ -13,6 +13,7 @@ #include <linux/file.h> #include <linux/ctype.h> #include <linux/netdevice.h> +#include <linux/kernel.h> #include <linux/slab.h> #ifdef CONFIG_SYSCTL_SYSCALL @@ -1124,11 +1125,6 @@ out: return result; } -static unsigned hex_value(int ch) -{ - return isdigit(ch) ? ch - '0' : ((ch | 0x20) - 'a') + 10; -} - static ssize_t bin_uuid(struct file *file, void __user *oldval, size_t oldlen, void __user *newval, size_t newlen) { @@ -1156,7 +1152,8 @@ static ssize_t bin_uuid(struct file *file, if (!isxdigit(str[0]) || !isxdigit(str[1])) goto out; - uuid[i] = (hex_value(str[0]) << 4) | hex_value(str[1]); + uuid[i] = (hex_to_bin(str[0]) << 4) | + hex_to_bin(str[1]); str += 2; if (*str == '-') str++; diff --git a/kernel/time.c b/kernel/time.c index 50612fa..848b1c2 100644 --- a/kernel/time.c +++ b/kernel/time.c @@ -132,10 +132,10 @@ SYSCALL_DEFINE2(gettimeofday, struct timeval __user *, tv, */ static inline void warp_clock(void) { - struct timespec delta, adjust; - delta.tv_sec = sys_tz.tz_minuteswest * 60; - delta.tv_nsec = 0; - adjust = timespec_add_safe(current_kernel_time(), delta); + struct timespec adjust; + + adjust = current_kernel_time(); + adjust.tv_sec += sys_tz.tz_minuteswest * 60; do_settimeofday(&adjust); } diff --git a/kernel/timer.c b/kernel/timer.c index 9199f3c..be394af 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -750,13 +750,14 @@ unsigned long apply_slack(struct timer_list *timer, unsigned long expires) unsigned long expires_limit, mask; int bit; - expires_limit = expires + timer->slack; + expires_limit = expires; - if (timer->slack < 0) /* auto slack: use 0.4% */ + if (timer->slack > -1) + expires_limit = expires + timer->slack; + else if (time_after(expires, jiffies)) /* auto slack: use 0.4% */ expires_limit = expires + (expires - jiffies)/256; mask = expires ^ expires_limit; - if (mask == 0) return expires; diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 756d728..8a76339 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3309,12 +3309,12 @@ static ssize_t tracing_splice_read_pipe(struct file *filp, size_t len, unsigned int flags) { - struct page *pages[PIPE_BUFFERS]; - struct partial_page partial[PIPE_BUFFERS]; + struct page *pages_def[PIPE_DEF_BUFFERS]; + struct partial_page partial_def[PIPE_DEF_BUFFERS]; struct trace_iterator *iter = filp->private_data; struct splice_pipe_desc spd = { - .pages = pages, - .partial = partial, + .pages = pages_def, + .partial = partial_def, .nr_pages = 0, /* This gets updated below. */ .flags = flags, .ops = &tracing_pipe_buf_ops, @@ -3325,6 +3325,9 @@ static ssize_t tracing_splice_read_pipe(struct file *filp, size_t rem; unsigned int i; + if (splice_grow_spd(pipe, &spd)) + return -ENOMEM; + /* copy the tracer to avoid using a global lock all around */ mutex_lock(&trace_types_lock); if (unlikely(old_tracer != current_trace && current_trace)) { @@ -3355,23 +3358,23 @@ static ssize_t tracing_splice_read_pipe(struct file *filp, trace_access_lock(iter->cpu_file); /* Fill as many pages as possible. */ - for (i = 0, rem = len; i < PIPE_BUFFERS && rem; i++) { - pages[i] = alloc_page(GFP_KERNEL); - if (!pages[i]) + for (i = 0, rem = len; i < pipe->buffers && rem; i++) { + spd.pages[i] = alloc_page(GFP_KERNEL); + if (!spd.pages[i]) break; rem = tracing_fill_pipe_page(rem, iter); /* Copy the data into the page, so we can start over. */ ret = trace_seq_to_buffer(&iter->seq, - page_address(pages[i]), + page_address(spd.pages[i]), iter->seq.len); if (ret < 0) { - __free_page(pages[i]); + __free_page(spd.pages[i]); break; } - partial[i].offset = 0; - partial[i].len = iter->seq.len; + spd.partial[i].offset = 0; + spd.partial[i].len = iter->seq.len; trace_seq_init(&iter->seq); } @@ -3382,12 +3385,14 @@ static ssize_t tracing_splice_read_pipe(struct file *filp, spd.nr_pages = i; - return splice_to_pipe(pipe, &spd); + ret = splice_to_pipe(pipe, &spd); +out: + splice_shrink_spd(pipe, &spd); + return ret; out_err: mutex_unlock(&iter->mutex); - - return ret; + goto out; } static ssize_t @@ -3786,11 +3791,11 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, unsigned int flags) { struct ftrace_buffer_info *info = file->private_data; - struct partial_page partial[PIPE_BUFFERS]; - struct page *pages[PIPE_BUFFERS]; + struct partial_page partial_def[PIPE_DEF_BUFFERS]; + struct page *pages_def[PIPE_DEF_BUFFERS]; struct splice_pipe_desc spd = { - .pages = pages, - .partial = partial, + .pages = pages_def, + .partial = partial_def, .flags = flags, .ops = &buffer_pipe_buf_ops, .spd_release = buffer_spd_release, @@ -3799,22 +3804,28 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, int entries, size, i; size_t ret; + if (splice_grow_spd(pipe, &spd)) + return -ENOMEM; + if (*ppos & (PAGE_SIZE - 1)) { WARN_ONCE(1, "Ftrace: previous read must page-align\n"); - return -EINVAL; + ret = -EINVAL; + goto out; } if (len & (PAGE_SIZE - 1)) { WARN_ONCE(1, "Ftrace: splice_read should page-align\n"); - if (len < PAGE_SIZE) - return -EINVAL; + if (len < PAGE_SIZE) { + ret = -EINVAL; + goto out; + } len &= PAGE_MASK; } trace_access_lock(info->cpu); entries = ring_buffer_entries_cpu(info->tr->buffer, info->cpu); - for (i = 0; i < PIPE_BUFFERS && len && entries; i++, len -= PAGE_SIZE) { + for (i = 0; i < pipe->buffers && len && entries; i++, len -= PAGE_SIZE) { struct page *page; int r; @@ -3869,11 +3880,12 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, else ret = 0; /* TODO: block */ - return ret; + goto out; } ret = splice_to_pipe(pipe, &spd); - + splice_shrink_spd(pipe, &spd); +out: return ret; } diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 2404c12..ab13d70 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -209,6 +209,7 @@ int trace_seq_putc(struct trace_seq *s, unsigned char c) return 1; } +EXPORT_SYMBOL(trace_seq_putc); int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len) { @@ -355,6 +356,21 @@ ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val, } EXPORT_SYMBOL(ftrace_print_symbols_seq); +const char * +ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int buf_len) +{ + int i; + const char *ret = p->buffer + p->len; + + for (i = 0; i < buf_len; i++) + trace_seq_printf(p, "%s%2.2x", i == 0 ? "" : " ", buf[i]); + + trace_seq_putc(p, 0); + + return ret; +} +EXPORT_SYMBOL(ftrace_print_hex_seq); + #ifdef CONFIG_KRETPROBES static inline const char *kretprobed(const char *name) { diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index 076c7c8..b2d70d3 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -54,8 +54,8 @@ int create_user_ns(struct cred *new) #endif /* tgcred will be cleared in our caller bc CLONE_THREAD won't be set */ - /* alloc_uid() incremented the userns refcount. Just set it to 1 */ - kref_set(&ns->kref, 1); + /* root_user holds a reference to ns, our reference can be dropped */ + put_user_ns(ns); return 0; } |