diff options
Diffstat (limited to 'tools/testing')
| -rw-r--r-- | tools/testing/ktest/sample.conf | 194 |
1 files changed, 103 insertions, 91 deletions
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 9236fe9..03d6e91 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -150,6 +150,18 @@ #TEST_START ITERATE 5 #TEST_START SKIP +# Have the following options as default again. Used after tests +# have already been defined by TEST_START. Optionally, you can +# just define all default options before the first TEST_START +# and you do not need this option. +# +# This is a label and not really an option (it takes no value). +# You can append SKIP to this label and the options within this +# section will be ignored. +# +# DEFAULTS +# DEFAULTS SKIP + # The default test type (default test) # The test types may be: # build - only build the kernel, do nothing else @@ -177,6 +189,10 @@ # If you are building a 32bit x86 on a 64 bit host #MAKE_CMD = CC=i386-gcc AS=i386-as make ARCH=i386 +# Any build options for the make of the kernel (not for other makes, like configs) +# (default "") +#BUILD_OPTIONS = -j20 + # If you need an initrd, you can add a script or code here to install # it. The environment variable KERNEL_VERSION will be set to the # kernel version that is used. Remember to add the initrd line @@ -201,6 +217,73 @@ # The test will not modify that file. #REBOOT_TYPE = grub +# The min config that is needed to build for the machine +# A nice way to create this is with the following: +# +# $ ssh target +# $ lsmod > mymods +# $ scp mymods host:/tmp +# $ exit +# $ cd linux.git +# $ rm .config +# $ make LSMOD=mymods localyesconfig +# $ grep '^CONFIG' .config > /home/test/config-min +# +# If you want even less configs: +# +# log in directly to target (do not ssh) +# +# $ su +# # lsmod | cut -d' ' -f1 | xargs rmmod +# +# repeat the above several times +# +# # lsmod > mymods +# # reboot +# +# May need to reboot to get your network back to copy the mymods +# to the host, and then remove the previous .config and run the +# localyesconfig again. The CONFIG_MIN generated like this will +# not guarantee network activity to the box so the TEST_TYPE of +# test may fail. +# +# You might also want to set: +# CONFIG_CMDLINE="<your options here>" +# randconfig may set the above and override your real command +# line options. +# (default undefined) +#MIN_CONFIG = /home/test/config-min + +# Sometimes there's options that just break the boot and +# you do not care about. Here are a few: +# # CONFIG_STAGING is not set +# Staging drivers are horrible, and can break the build. +# # CONFIG_SCSI_DEBUG is not set +# SCSI_DEBUG may change your root partition +# # CONFIG_KGDB_SERIAL_CONSOLE is not set +# KGDB may cause oops waiting for a connection that's not there. +# This option points to the file containing config options that will be prepended +# to the MIN_CONFIG (or be the MIN_CONFIG if it is not set) +# +# Note, config options in MIN_CONFIG will override these options. +# +# (default undefined) +#ADD_CONFIG = /home/test/config-broken + +# The location on the host where to write temp files +# (default /tmp/ktest) +#TMP_DIR = /tmp/ktest + +# Optional log file to write the status (recommended) +# Note, this is a DEFAULT section only option. +# (default undefined) +#LOG_FILE = /home/test/logfiles/target.log + +# Remove old logfile if it exists before starting all tests. +# Note, this is a DEFAULT section only option. +# (default 0) +#CLEAR_LOG = 0 + # Line to define a successful boot up in console output. # This is what the line contains, not the entire line. If you need # the entire line to match, then use regural expression syntax like: @@ -211,6 +294,26 @@ # (default "login:") #SUCCESS_LINE = login: +# Stop testing if a build fails. If set, the script will end if +# a failure is detected, otherwise it will save off the .config, +# dmesg and bootlog in a directory called +# MACHINE-TEST_TYPE_BUILD_TYPE-fail-yyyymmddhhmmss +# if the STORE_FAILURES directory is set. +# (default 1) +# Note, even if this is set to zero, there are some errors that still +# stop the tests. +#DIE_ON_FAILURE = 1 + +# Directory to store failure directories on failure. If this is not +# set, DIE_ON_FAILURE=0 will not save off the .config, dmesg and +# bootlog. This option is ignored if DIE_ON_FAILURE is not set. +# (default undefined) +#STORE_FAILURES = /home/test/failures + +# Build without doing a make mrproper, or removing .config +# (default 0) +#BUILD_NOCLEAN = 0 + # As the test reads the console, after it hits the SUCCESS_LINE # the time it waits for the monitor to settle down between reads # can usually be lowered. @@ -226,10 +329,6 @@ # (default 120) #TIMEOUT = 120 -# The location on the host where to write temp files -# (default /tmp/ktest) -#TMP_DIR = /tmp/ktest - # In between tests, a reboot of the box may occur, and this # is the time to wait for the console after it stops producing # output. Some machines may not produce a large lag on reboot @@ -247,10 +346,6 @@ # (default 60) #BISECT_SLEEP_TIME = 60 -# Build without doing a make mrproper, or removing .config -# (default 0) -#BUILD_NOCLEAN = 0 - # Reboot the target box on error (default 0) #REBOOT_ON_ERROR = 0 @@ -286,22 +381,6 @@ # (default undefined) #POWEROFF_AFTER_HALT = 20 -# Stop testing if a build fails. If set, the script will end if -# a failure is detected, otherwise it will save off the .config, -# dmesg and bootlog in a directory called -# MACHINE-TEST_TYPE_BUILD_TYPE-fail-yyyymmddhhmmss -# if the STORE_FAILURES directory is set. -# (default 1) -# Note, even if this is set to zero, there are some errors that still -# stop the tests. -#DIE_ON_FAILURE = 1 - -# Directory to store failure directories on failure. If this is not -# set, DIE_ON_FAILURE=0 will not save off the .config, dmesg and -# bootlog. This option is ignored if DIE_ON_FAILURE is not set. -# (default undefined) -#STORE_FAILURES = /home/test/failures - # A script or command to power off the box (default undefined) # Needed for POWEROFF_ON_ERROR and SUCCESS # @@ -311,73 +390,6 @@ # Example for a virtual guest call "Guest". #POWER_OFF = virsh destroy Guest -# Any build options for the make of the kernel (not for other makes, like configs) -# (default "") -#BUILD_OPTIONS = -j20 - -# Optional log file to write the status (recommended) -# Note, this is a DEFAULT section only option. -# (default undefined) -#LOG_FILE = /home/test/logfiles/target.log - -# Remove old logfile if it exists before starting all tests. -# Note, this is a DEFAULT section only option. -# (default 0) -#CLEAR_LOG = 0 - -# The min config that is needed to build for the machine -# A nice way to create this is with the following: -# -# $ ssh target -# $ lsmod > mymods -# $ scp mymods host:/tmp -# $ exit -# $ cd linux.git -# $ rm .config -# $ make LSMOD=mymods localyesconfig -# $ grep '^CONFIG' .config > /home/test/config-min -# -# If you want even less configs: -# -# log in directly to target (do not ssh) -# -# $ su -# # lsmod | cut -d' ' -f1 | xargs rmmod -# -# repeat the above several times -# -# # lsmod > mymods -# # reboot -# -# May need to reboot to get your network back to copy the mymods -# to the host, and then remove the previous .config and run the -# localyesconfig again. The CONFIG_MIN generated like this will -# not guarantee network activity to the box so the TEST_TYPE of -# test may fail. -# -# You might also want to set: -# CONFIG_CMDLINE="<your options here>" -# randconfig may set the above and override your real command -# line options. -# (default undefined) -#MIN_CONFIG = /home/test/config-min - -# Sometimes there's options that just break the boot and -# you do not care about. Here are a few: -# # CONFIG_STAGING is not set -# Staging drivers are horrible, and can break the build. -# # CONFIG_SCSI_DEBUG is not set -# SCSI_DEBUG may change your root partition -# # CONFIG_KGDB_SERIAL_CONSOLE is not set -# KGDB may cause oops waiting for a connection that's not there. -# This option points to the file containing config options that will be prepended -# to the MIN_CONFIG (or be the MIN_CONFIG if it is not set) -# -# Note, config options in MIN_CONFIG will override these options. -# -# (default undefined) -#ADD_CONFIG = /home/test/config-broken - #### Per test run options #### # The following options are only allowed in TEST_START sections. # They are ignored in the DEFAULTS sections. |