summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-11staging: comedi: adv_pci1710: use the pci id_table 'driver_data'H Hartley Sweeten
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'device_id' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. The pci1710 and pci1710hg boards have the same vendor/device id so it is impossible to determine which board is actually detected. The boardinfo for the pci1710hg is identical to the pci1710 other than the analog input range information. Remove the pci1710hg information and #if out the range tables for that device with the define USE_PCI1710HG_RANGE. Modify the pci1710 boardinfo accordingly to use the same define to determine which range table to use. Until a better solution is worked out, this will allow the driver to be compiled to support the pci1710 (default) or pci1710hg. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: comedi: adl_pci7x3x: use the pci id_table 'driver_data'H Hartley Sweeten
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'device' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Since the PCI device ids are now only used in the id_table, remove the defines and open code the device ids. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: comedi: adl_pci6208: use the pci id_table 'driver_data'H Hartley Sweeten
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'dev_id' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Since the PCI device ids are now only used in the id_table, remove the defines and open code the device ids. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: comedi: addi_apci_3120: use the pci id_table 'driver_data'H Hartley Sweeten
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'i_VendorId' and 'i_DeviceId' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: comedi: addi_apci_16xx: remove the boardinfo from the comedi_driverH Hartley Sweeten
This driver uses the comedi auto attach mechanism and does not need to supply the 'num_names', 'board_name', and 'offset' fields so that the comedi core can search the boardinfo. These fields are only used for the legacy attach. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: comedi: addi_apci_16xx: use the pci id_table 'driver_data'H Hartley Sweeten
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'vendor' and 'device' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Since the PCI device ids are now only used in the id_table, remove the defines and open code the device ids. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: comedi: addi_apci_1516: use the pci id_table 'driver_data'H Hartley Sweeten
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'device' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Since the PCI device ids are now only used in the id_table, remove the defines and open code the device ids. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: comedi: 8255_pci: use the pci id_table 'driver_data'H Hartley Sweeten
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'vendor' and 'device' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Since the PCI device ids are now only used in the id_table, remove the defines and open code the device ids. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: comedi: comedi_pci: change the comedi_pci_auto_config() 'context'H Hartley Sweeten
The comedi_pci_auto_config() function is used to allow the PCI driver (*probe) function to automatically call the comedi driver (*auto_attach). This allows the comedi driver to be part of the PnP process when the PCI device is detected. Currently the comedi_pci_auto_config() always passes a 'context' of '0' to comedi_auto_config(). This makes the 'context' a bit useless. Modify comedi_pci_auto_config() to allow the comedi pci drivers to pass a 'context' from the PCI driver. Make all the comedi pci drivers pass the pci_device_id 'driver_data' as the 'context'. Since none of the comedi pci drivers currently set the 'driver_data' the 'context' will still be '0'. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: sw_sync: sw_sync_timeline_ops can be staticChanglong Xie
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Changlong Xie <changlongx.xie@intel.com> Acked-by: Erik Gilling <konkers@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: zcache: using strlcpy instead of strncpyChen Gang
for NUL terminated string, need alway set '\0' in the end. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: csr: csr_time.c: Fix coding styleSeongJae Park
Signed-off-by: SeongJae Park <sj38.park@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: dgrp: Drop unnecessary typecastGuenter Roeck
An unnecessary typecast in dgrp_net_ops.c causes the following build error if compiled with W=1. In function ‘copy_from_user’, inlined from ‘dgrp_net_ioctl’ at drivers/staging/dgrp/dgrp_net_ops.c:3408:21: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11rtl8712: remove redundant if statementNiklas Söderlund
Same result no matter what path is taken. Signed-off-by: Niklas Söderlund <niso@kth.se> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11rtl8712: remove unused definitions from rtl871x_recv.hNiklas Söderlund
Signed-off-by: Niklas Söderlund <niso@kth.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11rtl8712: remove dead function prototypes from rtl871x_recv.hNiklas Söderlund
There is no implementation of these functions anywhere in the code. Signed-off-by: Niklas Söderlund <niso@kth.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11rtl8712: remove unused functions from rtl871x_recv.hNiklas Söderlund
Signed-off-by: Niklas Söderlund <niso@kth.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: update clock prepare countEduardo Valentin
This patch changes the clock management code to also update the clock prepare counter, this way we won't skip the enable/disable operation due to prepare dependencies. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: name data files accordinglyEduardo Valentin
This patch simply changes the name of files containing data structure definition. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: Remove double conv_table referenceEduardo Valentin
This patch removes from data structure the double reference of the conversion table. It keeps the reference coming from bandgap data definition. The patch also adapts the code accordingly. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: add DT example for OMAP54xx devicesEduardo Valentin
Update documentation with DT example for OMAP54xx devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: update DT entry documentationEduardo Valentin
Simple update on documentation file for DT. This patch also adds an example for OMAP4430 and 0MAP4470, and also updated OMAP4460's example. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: introduze FREEZE_BIT featureEduardo Valentin
For ES2.0 devices, it is not guaranteed that current DTEMP or DTEMP0 from the history buffer are going to contain correct values, due to desynchronization between BG clk and OCP clk. For this reason, this patch changes the driver to first: a. consider a feature flag, FREEZE_BIT, in order to check it is possible to freeze the history buffer or not. b. whenever reading the temperature, it will fetch from DTEMP1 instead of DTEMP or DTEMP0. This WA is applicable only for OMAP5430 ES2.0. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: remove dedicated counter register for OMAP5Eduardo Valentin
On OMAP54xx there is only one counter register. For this reason, each domain must use the same counter register. This patch changes the data definition to coupe with this. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: update feature bitfield for OMAP54xxEduardo Valentin
This patch removes from OMAP54xx the features: . CLK_CTRL . COUNTER . MODE_CONFIG Because these features are not present in OMAP54xx ES2.0 Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: update OMAP54xx clock sourcesEduardo Valentin
This patch updates the OMAP54xx data structure to use the right clock source name for ES2.0. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: introduce new features of OMAP54xxEduardo Valentin
On OMAP54xx ES2.0 there are new features inside the bandgap device. This patch introduces the registers definition to access these features and adapts the data structures to map these new registers. The new features are: . SIDLE mode . Cumulative register . History buffer. . Buffer freeze bit . Buffer clear bit Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: remove from register map soc and mode on OMAP5Eduardo Valentin
On OMAP54xx ES2.0 there is no single read and only one mode: continuous mode. For this reason, there is no point in defining register fields for these operations. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: standardize register nomenclature to use 'GPU'Eduardo Valentin
In order to keep same nomenclature across the register definition, this change will make all 'MM' suffixes to be named 'GPU'. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: update OMAP54xx conv_tableRadhesh Fadnis
This patch updates the ADC conversion table for OMAP5430 ES2.0 devices. Signed-off-by: Radhesh Fadnis <radhesh.fadnis@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: introduce clock feature flagRadhesh Fadnis
The clock to Bandgap module is SW controlled on some version of OMAP silicon (OMAP44xx). But on OMAP54xx ES2.0 onwards this is HW-Auto controlled. Hence introduce a feature flag to use/not-to-use SW enable/disable of BG clock. Signed-off-by: Radhesh Fadnis <radhesh.fadnis@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: omap-thermal: Add print when TSHUT temperature reachedRuslan Ruslichenko
To indicate that board was shut down due to TSHUT temperature reached it is good to print some information message before shutting down. Signed-off-by: Ruslan Ruslichenko <x0191366@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11wlan-ng: add a bounds checkDan Carpenter
I'm not sure where these results come from, but it can't hurt to add a sanity check the array offset. The .results[] array on the next line has HFA384x_CHINFORESULT_MAX (16) elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11wlan-ng: clean up prism2sta_inf_chinforesults()Dan Carpenter
This function is ugly because it hits against the 80 character limit. This patch does several things to clean it up. 1) Introduces "result" instead of inf->info.chinforesult.result[n]. 2) Reverses the ".scanchannels & (1 << i)" so everthing can be pulled in one indent level. 3) Use "chan" instead of "channel". 4) Tweaks the line breaks to the call to pr_debug(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: line6: pod.c: fix checkpatch warningLaurent Navet
- WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: removed lines over 80 charactersKurt Kanzenbach
This patch fixes the following checkpatch warning: -WARNING: line over 80 characters Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: userspace: fix whitespace errorsStefan Reif
This patch fixes the following checkpatch errors: -ERROR: space required after that ',' -ERROR: spaces required around that '=' -ERROR: space prohibited before that close parenthesis -WARNING: please, no space before tabs Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de> Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: remove unnecessary bracesStefan Reif
This patch fixes the following checkpatch warning: -WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de> Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: userspace: libsrc: added missing spaceKurt Kanzenbach
This patch fixes the following checkpatch warning: -WARNING: missing space after enum definition Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: userspace: libsrc: removed assignments in if conditionsKurt Kanzenbach
This patch fixes the following checkpatch error: -ERROR: do not use assignment in if condition Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: userspace: libsrc: replaced lines over 80 charactersKurt Kanzenbach
This patch fixes some of the following checkpatch warnings: -WARNING: line over 80 characters We did not split format strings for readability. Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: userspace: libsrc: (foo*) should be (foo *)Kurt Kanzenbach
This patch fixes the following checkpatch error: -ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: userspace: libsrc: spaces required around that '='Kurt Kanzenbach
This patch fixes the following checkpatch error: -ERROR: spaces required around that '=' Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: userspace: libsrc: do not init static/globals to 0Kurt Kanzenbach
This patch fixes the following checkpatch errors: -ERROR: do not initialise statics to 0 or NULL -ERROR: do not initialise globals to 0 or NULL Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: usbip: userspace: libsrc: fix indentionKurt Kanzenbach
This patch fixes the following checkpatch warning: -ERROR: code indent should use tabs where possible -WARNING: suspect code indent for conditional statements Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: silicom: Remove redundant NULL check before kfreeSyam Sidhardhan
kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11Staging: silicom: bp_mod: Removed trailing whitespacesAlexandru Gheorghiu
Fixed coding style issue. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging: fix all sparse warnings in silicom/bypasslib/Randy Dunlap
Fix all sparse warning in drivers/staging/silicom/bypasslib/, e.g.: drivers/staging/silicom/bypasslib/bypass.c:471:21: warning: non-ANSI function declaration of function 'init_lib_module' drivers/staging/silicom/bypasslib/bypass.c:478:25: warning: non-ANSI function declaration of function 'cleanup_lib_module' drivers/staging/silicom/bypasslib/bypass.c:137:5: warning: symbol 'is_bypass_dev' was not declared. Should it be static? drivers/staging/silicom/bypasslib/bypass.c:182:5: warning: symbol 'is_bypass' was not declared. Should it be static? drivers/staging/silicom/bypasslib/bypass.c:192:5: warning: symbol 'get_bypass_slave' was not declared. Should it be static? drivers/staging/silicom/bypasslib/bypass.c:197:5: warning: symbol 'get_bypass_caps' was not declared. Should it be static? drivers/staging/silicom/bypasslib/bypass.c:202:5: warning: symbol 'get_wd_set_caps' was not declared. Should it be static? etc. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging/gdm72xx: Remove duplicated code in gdm_qos.cPeter Huewe
The first branch of the if statement is ended with a return thus there is no need for an else if, and thus we can move the duplicated code to the top and use it for the other two branches. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-11staging/gdm72xx: Remove unused variable in gdm_qos.cPeter Huewe
len is never read after assignment, thus can be removed. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v0.10.2 at 2024-08-07 03:22:02 (GMT)