| Age | Commit message (Collapse) | Author |
|---|
|
Delete unused "RefreshRateTableIndex" parameters from internal functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delete unused "HwDeviceExtension" parameters from internal functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delete unused "ModeIdIndex" parameters from internal functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delete unused "ModeNo" parameters from internal functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delete unused "rateindex" parameters from internal functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When dma is disabled inside dwc2 (because the hardware does not support
it, or the code was changed to disable it for testing), let the usb core
know about this by clearing hcd->self.uses_dma.
By default, the usb core assumes that dma is used when a dma_mask is
set, but this might not always match the dma_enable value in dwc2. To
prevent problems resulting from a mismatch, better to explicitely
disable dma in this case (though everything seemed to work with the
wrong value of uses_dma as well, probably only resulted in some unneeded
work).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the platform or bus driver failed to setup a dma_mask, but the
hardware advertises support for DMA, before DMA would be enabled in
dwc2, but disabled in the usb core, making all connectivity break.
With this commit, the dwc2 driver will emit a warning and fall back to
slave mode in this case.
Note that since commit 642f2ec (staging: dwc2: Fix dma-enabled platform
devices using a default dma_mask) the platform bindings make sure a DMA
mask is always present, but having this check here anyway is probably a
good from a defensive programming standpoint (in case of changes to
platform.c or addition of new glue layers).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dwc2 driver sets the value of the DWC2 GAHBCFG register to 0x6,
which is GAHBCFG_HBSTLEN_INCR4. But different platforms may require
different values. In particular, the Broadcom 2835 SOC used in the
Raspberry Pi needs a value of 0x10, otherwise the DWC2 controller
stops working after a short period of heavy USB traffic.
So this patch adds another driver parameter named 'ahbcfg'. The
default value is 0x6. Any platform needing a different value should
add a DT attribute to set it.
This patch also removes the 'ahb_single' driver parameter, since
that bit can now be set using 'ahbcfg'.
This patch does not add DT support to platform.c, I will leave that
to whoever owns the first platform that needs a non-default value.
(Stephen?)
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fix uses 'value' parameter as it should be instead
of hardcoded -1.
Signed-off-by: Julien Delacou <julien.delacou@stericsson.com>
Acked-by: Paul Zimmerman <paulz@synopys.com>
Reviewed-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the use of bus_to_virt() and just fail the transfer if an
unaligned buffer with no virtual address is found. AFAIK that
can't happen anyway.
Also change setting of coherent DMA mask to the normal 32 bits.
31 bits was only needed when calling bus_to_virt() AFAICR.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the non-aligned buffer debug messages to dev_vdbg(). Also
remove some duplicated debug output when the driver is loaded.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The logic in dwc2_hcd_qtd_add() was a bit messy, and one of the
error exit paths was broken. Fix it up.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make dwc2_hc_handle_tt_clear() return early if the device is
hi-speed.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver was lacking calls to usb_hcd_link_urb_to_ep(),
usb_hcd_unlink_urb_from_ep(), and usb_hcd_check_unlink_urb(). Add
those now.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parameters to dwc2_host_complete() didn't make much sense.
The 'context' parameter always came from the ->priv member of the
'dwc2_urb' parameter, and both of those always came from a struct
dwc2_qtd. So just pass in the struct dwc2_qtd instead.
This also allows us to null out the dwc2_qtd->urb member after it
is freed, which the calling code forgot to do in several places,
causing random driver crashes from dereferencing the freed pointer.
This also requires the calls to dwc2_hc_handle_tt_clear() to be
moved before the calls to dwc2_host_complete(), otherwise that
routine would do nothing because dwc2_qtd->urb has already been
freed.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Sunghan Suh <sunghan.suh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MAC respresentation should follow standard form.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct spelling typo in staging/imx-drm
Singed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed spacing/tabs issues that were found using checkpatch.
Signed-off-by: Lilis Iskandar <veeableful@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes CMPK_DEBOUNCE_CNT and CMPK_PRINT()
because they are not used anywhere in the driver.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch limits the line size below 80 characters, when
possible, and fixes identation to meet kernel coding style
convetions.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch warning:
WARNING: Avoid unnecessary line continuations
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patches fixes comments by:
- replacing // comments with /**/ comments
- removing unnecessary comments (trailing comments
with the function name, comments stating date/author
when they are placed inside the function definition)
- fixing internal alignment
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes whitespaces in r819xU_cmdpkt.c to
follow the kernel coding style and to improve code
readability.
It fixes the spaces around <,=||&&();} and adds or
removes tabs to better align variables.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the brace position according to the
linux kernel coding style and removes unnecessary braces.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes commented-out code and the comments
that refer to it to facilitate code review.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Found using coccinelle tool.
Signed-off-by: Vladimir Cernov <gg.kaspersky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the dev_desc_t typedef for the dev_desc struct in bpctl_mod.c,
resolving a checkpatch.pl warning. In fact, we can use an anonymous
struct, since it's only used in the single dev_desc array of device
descriptions, whose definition follows immediately.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the bpmod_info_t typedef from bpctl_mod.c, replacing it with
struct bpmod_info.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the bpctl_dev_t typdef in bpctl_mod.c with struct bpctl_dev
for coding style compliance.
Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The changes in this patch will fix the binder interface for use on 64bit
machines and stand as the base of the 64bit compat support. The changes
apply to the structures that are passed between the kernel and
userspace.
Most of the changes applied mirror the change to struct binder_version
where there is no need for a 64bit wide protocol_version(on 64bit
machines). The change inlines with the existing 32bit userspace(the
structure has the same size) and simplifies the compat layer such that
the same handler can service the BINDER_VERSION ioctl.
Other changes make use of kernel types as well as user-exportable ones
and fix format specifier issues.
The changes do not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since this driver is meant to be used on different types of processors
and a portable driver should specify the size a variable expects to be
this patch changes the types used throughout the binder interface.
We use "userspace" types since this header will be exported and used by
the Android filesystem.
The patch does not change in any way the functionality of the binder driver.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Android userspace aligns the data written to the binder buffers to
4bytes. Thus for 32bit platforms or 64bit platforms running an 32bit
Android userspace we can have a buffer looking like this:
platform buffer(binder_cmd pointer) size
32/32 32b 32b 8B
64/32 32b 64b 12B
64/64 32b 64b 12B
Thus the kernel needs to check that the buffer size is aligned to 4bytes
not to (void *) that will be 8bytes on 64bit machines.
The change does not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
BinderDriverCommands mirror the ioctl usage. Thus the size of the
structure passed through the interface should be used to generate the
ioctl No.
The change reflects the type being passed from the user space-a pointer
to a binder_buffer. This change should not affect the existing 32bit
user space since BC_FREE_BUFFER is computed as:
#define _IOW(type,nr,size) \
((type) << _IOC_TYPESHIFT) | \
((nr) << _IOC_NRSHIFT) | \
((size) << _IOC_SIZESHIFT))
and for a 32bit compiler BC_FREE_BUFFER will have the same computed
value. This change will also ease our work in differentiating
BC_FREE_BUFFER from COMPAT_BC_FREE_BUFFER.
The change does not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change will fix the BINDER_SET_MAX_THREADS ioctl to use __u32
instead of size_t for setting the max threads. Thus using the same
handler for 32 and 64bit kernels.
This value is stored internally in struct binder_proc and set to 15
on open_binder() in the libbinder API(thus no need for a 64bit size_t
on 64bit platforms).
The change does not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change mirrors the userspace operation where struct binder_write_read
members that specify the buffer size and consumed size are size_t elements.
The patch also fixes the binder_thread_write() and binder_thread_read()
functions prototypes to conform with the definition of binder_write_read.
The changes do not affect existing 32bit ABI.
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename Kbuild to usual Makefile, consistent with
Kernel build structure.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace macro with inline function.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove old oz_trace & oz_trace2 macro & related header files.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce new debug macros: oz_dbg, oz_cdev_dbg, oz_pd_dbg
and then replace old oz_trace & oz_trace2 with new macro.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary debug logs. Most of these logs
print function name at the start of function, which
are not really required.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After migrating ISA DMA support from the "ni_labpc" module to the new
"ni_labpc_isadma" module, the `COMEDI_NI_LABPC_ISA` configuration option
no longer depends on `VIRT_TO_BUS`, so remove the dependency.
(The new `COMEDI_NI_LABPC_ISADMA` option does depend on `VIRT_TO_BUS`
but is not configured manually and is only selected automatically if the
`VIRT_TO_BUS` and `ISA_DMA_API` options are set.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After migrating the ISA DMA handling code to the "ni_labpc_isadma"
module, get rid of an unneeded `#include` and a couple of unused
static variables.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Migrate the code for checking and handling the interrupt status handling
for ISA DMA transfers into new a new function
`labpc_handle_dma_status()` in the "ni_labpc_isadma" module. Provide a
dummy inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma"
module is not being built.
The static function `handle_isa_dma()` also needs to move across to the
new module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move `labpc_drain_dma()` into the "ni_labpc_isadma" module. Provide a
dummy inline function in "ni_labpc_isadma.h" if the module is not being
built.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Migrate the code for setting up an ISA DMA transfer into a new function
`labpc_setup_dma()` in the "ni_labpc_isadma" module. Provide a dummy
inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma" module
is not being built.
The static function `labpc_suggest_transfer_size()` also needs to move
across to the new module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The new "ni_labpc_isadma" module will need to access some register
definitions from "ni_labpc.c", which is not part of the module's source.
Move all the register definitions into a new, common header file
"ni_labpc_regs.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call the new static inline function `labpc_have_dma_chan()` from
`labpc_ai_cmd()` to check if the ISA DMA channel has been initialized,
tidying up the surrounding code and removing an `#ifdef`. If the
"ni_labpc_isadma" module is not being built, `labpc_have_dma_chan()`
doesn't bother checking the DMA channel and just returns `false`,
allowing the compiler to optimize out a small amount of code.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a static inline function to "ni_labpc_isadma.h" to test if a DMA
channel has been set-up, in which case `devpriv->dma_chan` will be
non-zero (where `devpriv` point to the private data for the comedi
device). If the "ni_labpc_isadma" module is not being built, don't
bother checking `devpriv->dma_chan`; just return `false` as this may
help the compiler to optimize out some unreachable code.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Migrate the code for requesting an ISA DMA channel and a DMA buffer, and
the code for freeing them into two new functions in the
"ni_labpc_isadma" module: `labpc_init_dma_chan()` and
`labpc_free_dma_chan()`. Dummy inline functions are provided in
"ni_labpc_isadma.h" if the "ni_labpc_isadma" module is not being built.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
