summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-12regulators: Added verbose debug messages to ab8500 regulatorsBengt Jonsson
The verbose debug outputs register writes and reads that can be used to debug the driver. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulators: Modified ab8500 error handlingBengt Jonsson
Error handling is updated to catch NULL pointer errors. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulators: Updated ab8500 variable names, macro names and commentsBengt Jonsson
The regulator enumeration is used for putting the regulator data in correct place in the info array. This should be matched in the board configuration. Variable names are updated to be more consistent, comments are corrected and macros have been edited to be consistent. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulators: Added ab8500 v2 supportBengt Jonsson
The AUX3 regulator voltage setting is changed in ab8500 v2 compared to ab8500 v1. This patch adds v2 support while keeping support for v1. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulators: Clean out unused code in ab8500 regulatorsBengt Jonsson
The find_regulator function was unused so it has been removed. The ab8500 pointer in the regulator info structure was unused and so it has also been removed. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulators: Fixed errors in ab8500 register mappingBengt Jonsson
For INTCORE and TVOUT regulators, the low power register bit is included in the mask so that enable will set the regulator in normal (high power) mode. ANAMIC1, ANAMIC2, DMIC regulator settings are swapped with each other so that the correct regulator gets enabled/disabled. ANA regulator register address is corrected. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulators: Moved define for number of regulators in ab8500Bengt Jonsson
The define for number of regulators is moved from ab8500-core to ab8500-regulator so that the regulator driver can be updated independently of ab8500-core. This also changes the platform configuration structure of ab8500-core so that it contains a pointer to the regulator_init_data array plus number of regulators instead of an fixed size array of pointers to regulator_init_data. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: add driver for tps6524x regulatorCyril Chemparathy
TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using SPI. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Convert WM831x drivers to use get_voltage_sel()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Allow drivers to report voltages as selectorsMark Brown
Since drivers already have to provide an API for translating selectors into voltages they may as well just report the selector values directly to the core API rather than implement the lookup themselves. The old interface is left in place for now, but may be removed in future. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Use _regulator_get_voltage() consistentlyMark Brown
Rather than referencing the get_voltage() operation directly in the ops struct use the internal _regulator_get_voltage() API call to do so, facilitating refactoring. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12drivers/regulator: Update WARN usesJoe Perches
Align arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Take into account the requirements of all consumersThomas Petazzoni
Extend the regulator_set_voltage() function to take into account the voltage requirements of all consumers of the regulator being changed, in order to set the voltage to the minimum voltage acceptable to all consumers. The existing behaviour was that the latest regulator_set_voltage() call would win over previous regulator_set_voltage() calls even if setting the voltage to a non-acceptable level from other consumers. Signed-off-by: Thomas Petazzoni <t-petazzoni@ti.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Add and use rdev_<level> macrosJoe Perches
On Tue, 2010-11-30 at 10:52 +0000, Mark Brown wrote: > On Mon, Nov 29, 2010 at 05:12:56PM -0800, Joe Perches wrote: > > Just to please broonie... > > Signed-off-by: Joe Perches <joe@perches.com> > As usual when fixing review issues please revise your original patch > rather than posting a fresh patch. Here's an earlier comment: On Thu, 2010-11-18 at 13:30 +0000, Mark Brown wrote: > This looks reasonable, please rebase on top of Daniel's patches and > submit it properly (with changelog and so on). Sometimes it's simpler for an upstream maintainer to do something like: git am -s <patch1.mbox> patch -p1 < patch2.mbox git commit --amend file instead of back and forthing. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Remove duplicate consts from mc13873 driver voltage tablesMark Brown
They're not needed and sparse is verbosely upset about them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Copy constraints from regulators when initialising themMark Brown
Currently the regulator API uses the constraints structure passed in to the core throughout the lifetime of the object. This means that it is not possible to mark the constraints as __initdata so if the kernel supports many boards the constraints for all of them are kept around throughout the lifetime of the system, consuming memory needlessly. By copying constraints that are actually used we allow the use of __initdata, saving memory when multiple boards are supported. This also means the constraints can be const. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Fix prototype for MAX8998 buck set_voltage()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Remove regulator core version announcementMark Brown
The version hasn't been updated since the regulator API was merged in 2.6.27 so just remove it - now we're in mainline the kernel version is much more useful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Fix obfuscated log messagesMark Brown
Don't use %s to format fixed static strings into log messages, it just makes searching for and reading the message in the kernel source needlessly hard. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12drivers: regulator: core: convert to using pr_ macrosDaniel Walker
The regulator framework uses a lot of printks with a specific formatting using __func__. This converts them to use pr_ calls with a central format string. Cc: bleong@codeaurora.org Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12drivers: regulator: core: use pr_fmtDaniel Walker
This adds a pr_fmt line which uses the __func__ macro. I also convert the current pr_ lines to remove their __func__ usage. Cc: bleong@codeaurora.org Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Fix typo in PCAP regulator_set_voltage()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: enable supply regulator only when use count is zeroBengt Jonsson
Supply regulators are disabled only when the last reference count is removed on the child regulator (the use count goes from 1 to 0). This patch changes the behaviour of enable so the supply regulator is enabled only when the use count of the child regulator goes from 0 to 1. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Add basic trace facilitiesMark Brown
Provide some basic trace facilities to the regulator API. We generate events on regulator enable, disable and voltage setting over the actual hardware operations (which are assumed to be the expensive ones which require interaction with the actual device). This is intended to facilitate debug of the performance and behaviour with consumers allowing unified traces to be generated including the regulator operations within the context of the other components of the system. For enable we log the explicit delay for the voltage ramp separately to the interaction with the hardware to highlight the time consumed in I/O. We should add a similar delay for voltage changes, though there the relatively small magnitude of the changes in the context of the I/O costs makes it much less critical for most regulators. Only hardware interactions are currently traced as the primary focus is on the performance and synchronisation of actual hardware interactions. Additional tracepoints for debugging of the logical operations can be added later if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: Report actual configured voltage to set_voltage()Mark Brown
Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12regulator: lock supply in regulator enableMattias Wallin
This patch add locks around regulator supply enable. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits) cxgb4vf: recover from failure in cxgb4vf_open() netfilter: ebtables: make broute table work again netfilter: fix race in conntrack between dump_table and destroy ah: reload pointers to skb data after calling skb_cow_data() ah: update maximum truncated ICV length xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC ehea: Increase the skb array usage net/fec: remove config FEC2 as it's used nowhere pcnet_cs: add new_id tcp: disallow bind() to reuse addr/port net/r8169: Update the function of parsing firmware net: ppp: use {get,put}_unaligned_be{16,32} CAIF: Fix IPv6 support in receive path for GPRS/3G arp: allow to invalidate specific ARP entries net_sched: factorize qdisc stats handling mlx4: Call alloc_etherdev to allocate RX and TX queues net: Add alloc_netdev_mqs function caif: don't set connection request param size before copying data cxgb4vf: fix mailbox data/control coherency domain race qlcnic: change module parameter permissions ...
2011-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix bootup regression due to perf init ordering.
2011-01-12Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (72 commits) powerpc/pseries: Fix build of topology stuff without CONFIG_NUMA powerpc/pseries: Fix VPHN build errors on non-SMP systems powerpc/83xx: add mpc8308_p1m DMA controller device-tree node powerpc/83xx: add DMA controller to mpc8308 device-tree node powerpc/512x: try to free dma descriptors in case of allocation failure powerpc/512x: add MPC8308 dma support powerpc/512x: fix the hanged dma transfer issue powerpc/512x: scatter/gather dma fix powerpc/powermac: Make auto-loading of therm_pm72 possible of/address: Use propper endianess in get_flags powerpc/pci: Use printf extension %pR for struct resource powerpc: Remove unnecessary casts of void ptr powerpc: Disable VPHN polling during a suspend operation powerpc/pseries: Poll VPA for topology changes and update NUMA maps powerpc: iommu: Add device name to iommu error printks powerpc: Record vma->phys_addr in ioremap() powerpc: Update compat_arch_ptrace powerpc: Fix PPC_PTRACE_SETHWDEBUG on PPC_BOOK3S powerpc/time: printk time stamp init not correct powerpc: Minor cleanups for machdep.h ...
2011-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits) IB/qib: Fix refcount leak in lkey/rkey validation IB/qib: Improve SERDES tunning on QMH boards IB/qib: Unnecessary delayed completions on RC connection IB/qib: Issue pre-emptive NAKs on eager buffer overflow IB/qib: RDMA lkey/rkey validation is inefficient for large MRs IB/qib: Change QPN increment IB/qib: Add fix missing from earlier patch IB/qib: Change receive queue/QPN selection IB/qib: Fix interrupt mitigation IB/qib: Avoid duplicate writes to the rcv head register IB/qib: Add a few new SERDES tunings IB/qib: Reset packet list after freeing IB/qib: New SERDES init routine and improvements to SI quality IB/qib: Clear WAIT_SEND flags when setting QP to error state IB/qib: Fix context allocation with multiple HCAs IB/qib: Fix multi-Florida HCA host panic on reboot IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better IB/qib: UD send with immediate receive completion has wrong size IB/qib: Set port physical state even if other fields are invalid IB/qib: Generate completion callback on errors ...
2011-01-11powerpc/pseries: Fix build of topology stuff without CONFIG_NUMABenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-11cxgb4vf: recover from failure in cxgb4vf_open()Casey Leedom
If the Link Start fails in cxgb4vf_open(), we need to back out any state that we've built up ... Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11Merge branch 'master' of git://1984.lsi.us.es/net-2.6David S. Miller
2011-01-11Merge branch 'nfs-for-2.6.38' of ↵Linus Torvalds
git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'nfs-for-2.6.38' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (89 commits) NFS fix the setting of exchange id flag NFS: Don't use vm_map_ram() in readdir NFSv4: Ensure continued open and lockowner name uniqueness NFS: Move cl_delegations to the nfs_server struct NFS: Introduce nfs_detach_delegations() NFS: Move cl_state_owners and related fields to the nfs_server struct NFS: Allow walking nfs_client.cl_superblocks list outside client.c pnfs: layout roc code pnfs: update nfs4_callback_recallany to handle layouts pnfs: add CB_LAYOUTRECALL handling pnfs: CB_LAYOUTRECALL xdr code pnfs: change lo refcounting to atomic_t pnfs: check that partial LAYOUTGET return is ignored pnfs: add layout to client list before sending rpc pnfs: serialize LAYOUTGET(openstateid) pnfs: layoutget rpc code cleanup pnfs: change how lsegs are removed from layout list pnfs: change layout state seqlock to a spinlock pnfs: add prefix to struct pnfs_layout_hdr fields pnfs: add prefix to struct pnfs_layout_segment fields ...
2011-01-11netfilter: ebtables: make broute table work againFlorian Westphal
broute table init hook sets up the "br_should_route_hook" pointer, which then gets called from br_input. commit a386f99025f13b32502fe5dedf223c20d7283826 (bridge: add proper RCU annotation to should_route_hook) introduced a typedef, and then changed this to: br_should_route_hook_t *rhook; [..] rhook = rcu_dereference(br_should_route_hook); if (*rhook(skb)) problem is that "br_should_route_hook" contains the address of the function, so calling *rhook() results in kernel panic. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-01-11netfilter: fix race in conntrack between dump_table and destroyStephen Hemminger
The netlink interface to dump the connection tracking table has a race when entries are deleted at the same time. A customer reported a crash and the backtrace showed thatctnetlink_dump_table was running while a conntrack entry was being destroyed. (see https://bugzilla.vyatta.com/show_bug.cgi?id=6402). According to RCU documentation, when using hlist_nulls the reader must handle the case of seeing a deleted entry and not proceed further down the linked list. The old code would continue which caused the scan to walk into the free list. This patch uses locking (rather than RCU) for this operation which is guaranteed safe, and no longer requires getting reference while doing dump operation. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-01-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: UDF: Close small mem leak in udf_find_entry() udf: Fix directory corruption after extent merging udf: Protect udf_file_aio_write from possible races udf: Remove unnecessary bkl usages udf: Use of s_alloc_mutex to serialize udf_relocate_blocks() execution udf: Replace bkl with the UDF_I(inode)->i_data_sem for protect udf_inode_info struct udf: Remove BKL from free space counting functions udf: Call udf_add_free_space() for more blocks at once in udf_free_blocks() udf: Remove BKL from udf_put_super() and udf_remount_fs() udf: Protect default inode credentials by rwlock udf: Protect all modifications of LVID with s_alloc_mutex udf: Move handling of uniqueID into a helper function and protect it by a s_alloc_mutex udf: Remove BKL from udf_update_inode udf: Convert UDF_SB(sb)->s_flags to use bitops fs/udf: Add printf format/argument verification fs/udf: Use vzalloc (Evil merge: this also removes the BKL dependency from the Kconfig file)
2011-01-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (44 commits) ext4: fix trimming starting with block 0 with small blocksize ext4: revert buggy trim overflow patch ext4: don't pass entire map to check_eofblocks_fl ext4: fix memory leak in ext4_free_branches ext4: remove ext4_mb_return_to_preallocation() ext4: flush the i_completed_io_list during ext4_truncate ext4: add error checking to calls to ext4_handle_dirty_metadata() ext4: fix trimming of a single group ext4: fix uninitialized variable in ext4_register_li_request ext4: dynamically allocate the jbd2_inode in ext4_inode_info as necessary ext4: drop i_state_flags on architectures with 64-bit longs ext4: reorder ext4_inode_info structure elements to remove unneeded padding ext4: drop ec_type from the ext4_ext_cache structure ext4: use ext4_lblk_t instead of sector_t for logical blocks ext4: replace i_delalloc_reserved_flag with EXT4_STATE_DELALLOC_RESERVED ext4: fix 32bit overflow in ext4_ext_find_goal() ext4: add more error checks to ext4_mkdir() ext4: ext4_ext_migrate should use NULL not 0 ext4: Use ext4_error_file() to print the pathname to the corrupted inode ext4: use IS_ERR() to check for errors in ext4_error_file ...
2011-01-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: ext2: Resolve 'dereferencing pointer to incomplete type' when enabling EXT2_XATTR_DEBUG ext3: Remove redundant unlikely() ext2: Remove redundant unlikely() ext3: speed up file creates by optimizing rec_len functions ext2: speed up file creates by optimizing rec_len functions ext3: Add more journal error check ext3: Add journal error check in resize.c quota: Use %pV and __attribute__((format (printf in __quota_error and fix fallout ext3: Add FITRIM handling ext3: Add batched discard support for ext3 ext3: Add journal error check into ext3_rename() ext3: Use search_dirblock() in ext3_dx_find_entry() ext3: Avoid uninitialized memory references with a corrupted htree directory ext3: Return error code from generic_check_addressable ext3: Add journal error check into ext3_delete_entry() ext3: Add error check in ext3_mkdir() fs/ext3/super.c: Use printf extension %pV fs/ext2/super.c: Use printf extension %pV ext3: don't update sb journal_devnum when RO dev
2011-01-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Don't set dentry->d_op in create routines fs/9p: fix spelling typo fs/9p: TREADLINK bugfix net/9p: Use proper data types fs/9p: Simplify the .L create operation fs/9p: Move dotl inode operations into a seperate file fs/9p: fix menu presentation fs/9p: Fix the return error on default acl removal fs/9p: Remove unnecessary semicolons
2011-01-11ah: reload pointers to skb data after calling skb_cow_data()Dang Hongwu
skb_cow_data() may allocate a new data buffer, so pointers on skb should be set after this function. Bug was introduced by commit dff3bb06 ("ah4: convert to ahash") and 8631e9bd ("ah6: convert to ahash"). Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com> Acked-by: Krzysztof Witek <krzysztof.witek@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11ah: update maximum truncated ICV lengthNicolas Dichtel
For SHA256, RFC4868 requires to truncate ICV length to 128 bits, hence MAX_AH_AUTH_LEN should be updated to 16. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNCNicolas Dichtel
Maximum trunc length is defined by MAX_AH_AUTH_LEN (in bytes) and need to be checked when this value is set (in bits) by the user. In ah4.c and ah6.c a BUG_ON() checks this condiftion. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11ehea: Increase the skb array usageBreno Leitao
Currently the skb array is not fully allocated, and the allocation is done as it's requested, which is not the expected way. This patch just allocate the full skb array at driver initialization. Also, this patch increases ehea version to 107. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11net/fec: remove config FEC2 as it's used nowhereShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11pcnet_cs: add new_idKen Kawasaki
pcnet_cs: add another ID of "corega Ether CF-TD" 10Base-T PCMCIA card. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11tcp: disallow bind() to reuse addr/portEric Dumazet
inet_csk_bind_conflict() logic currently disallows a bind() if it finds a friend socket (a socket bound on same address/port) satisfying a set of conditions : 1) Current (to be bound) socket doesnt have sk_reuse set OR 2) other socket doesnt have sk_reuse set OR 3) other socket is in LISTEN state We should add the CLOSE state in the 3) condition, in order to avoid two REUSEADDR sockets in CLOSE state with same local address/port, since this can deny further operations. Note : a prior patch tried to address the problem in a different (and buggy) way. (commit fda48a0d7a8412ced tcp: bind() fix when many ports are bound). Reported-by: Gaspar Chilingarov <gasparch@gmail.com> Reported-by: Daniel Baluta <daniel.baluta@gmail.com> Tested-by: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11ext4: fix trimming starting with block 0 with small blocksizeJan Kara
When s_first_data_block is not zero (which happens e.g. when block size is 1KB) and trim ioctl is called to start trimming from block 0, the math in ext4_get_group_no_and_offset() overflows. The overall result is that ioctl returns EINVAL which is kind of unexpected and we probably don't want userspace tools to bother with internal details of filesystem structure. So just silently increase starting offset (and shorten length) when starting block is below s_first_data_block. CC: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-11ext4: revert buggy trim overflow patchTheodore Ts'o
This reverts commit 4f531501e44: ext4: fix possible overflow in ext4_trim_fs() Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-11Merge branch 'for-linus-merged' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus-merged' of git://oss.sgi.com/xfs/xfs: (47 commits) xfs: convert grant head manipulations to lockless algorithm xfs: introduce new locks for the log grant ticket wait queues xfs: convert log grant heads to atomic variables xfs: convert l_tail_lsn to an atomic variable. xfs: convert l_last_sync_lsn to an atomic variable xfs: make AIL tail pushing independent of the grant lock xfs: use wait queues directly for the log wait queues xfs: combine grant heads into a single 64 bit integer xfs: rework log grant space calculations xfs: fact out common grant head/log tail verification code xfs: convert log grant ticket queues to list heads xfs: use AIL bulk delete function to implement single delete xfs: use AIL bulk update function to implement single updates xfs: remove all the inodes on a buffer from the AIL in bulk xfs: consume iodone callback items on buffers as they are processed xfs: reduce the number of AIL push wakeups xfs: bulk AIL insertion during transaction commit xfs: clean up xfs_ail_delete() xfs: Pull EFI/EFD handling out from under the AIL lock xfs: fix EFI transaction cancellation. ...
generated by cgit v0.10.2 at 2024-09-17 18:30:05 (GMT)