summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-16act_mirred: do not drop packets when fails to mirror itJason Wang
We drop packet unconditionally when we fail to mirror it. This is not intended in some cases. Consdier for kvm guest, we may mirror the traffic of the bridge to a tap device used by a VM. When kernel fails to mirror the packet in conditions such as when qemu crashes or stop polling the tap, it's hard for the management software to detect such condition and clean the the mirroring before. This would lead all packets to the bridge to be dropped and break the netowrk of other virtual machines. To solve the issue, the patch does not drop packets when kernel fails to mirror it, and only drop the redirected packets. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16net: fix info leak in compat dev_ifconf()Mathias Krause
The implementation of dev_ifconf() for the compat ioctl interface uses an intermediate ifc structure allocated in userland for the duration of the syscall. Though, it fails to initialize the padding bytes inserted for alignment and that for leaks four bytes of kernel stack. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16ipvs: fix info leak in getsockopt(IP_VS_SO_GET_TIMEOUT)Mathias Krause
If at least one of CONFIG_IP_VS_PROTO_TCP or CONFIG_IP_VS_PROTO_UDP is not set, __ip_vs_get_timeouts() does not fully initialize the structure that gets copied to userland and that for leaks up to 12 bytes of kernel stack. Add an explicit memset(0) before passing the structure to __ip_vs_get_timeouts() to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: Simon Horman <horms@verge.net.au> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16dccp: fix info leak via getsockopt(DCCP_SOCKOPT_CCID_TX_INFO)Mathias Krause
The CCID3 code fails to initialize the trailing padding bytes of struct tfrc_tx_info added for alignment on 64 bit architectures. It that for potentially leaks four bytes kernel stack via the getsockopt() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16dccp: check ccid before dereferencingMathias Krause
ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with a NULL ccid pointer leading to a NULL pointer dereference. This could lead to a privilege escalation if the attacker is able to map page 0 and prepare it with a fake ccid_ops pointer. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16llc: fix info leak via getsockname()Mathias Krause
The LLC code wrongly returns 0, i.e. "success", when the socket is zapped. Together with the uninitialized uaddrlen pointer argument from sys_getsockname this leads to an arbitrary memory leak of up to 128 bytes kernel stack via the getsockname() syscall. Return an error instead when the socket is zapped to prevent the info leak. Also remove the unnecessary memset(0). We don't directly write to the memory pointed by uaddr but memcpy() a local structure at the end of the function that is properly initialized. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16l2tp: fix info leak via getsockname()Mathias Krause
The L2TP code for IPv6 fails to initialize the l2tp_unused member of struct sockaddr_l2tpip6 and that for leaks two bytes kernel stack via the getsockname() syscall. Initialize l2tp_unused with 0 to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16Bluetooth: L2CAP - Fix info leak via getsockname()Mathias Krause
The L2CAP code fails to initialize the l2_bdaddr_type member of struct sockaddr_l2 and the padding byte added for alignment. It that for leaks two bytes kernel stack via the getsockname() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16Bluetooth: RFCOMM - Fix info leak via getsockname()Mathias Krause
The RFCOMM code fails to initialize the trailing padding byte of struct sockaddr_rc added for alignment. It that for leaks one byte kernel stack via the getsockname() syscall. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16Bluetooth: RFCOMM - Fix info leak in ioctl(RFCOMMGETDEVLIST)Mathias Krause
The RFCOMM code fails to initialize the two padding bytes of struct rfcomm_dev_list_req inserted for alignment before copying it to userland. Additionally there are two padding bytes in each instance of struct rfcomm_dev_info. The ioctl() that for disclosures two bytes plus dev_num times two bytes uninitialized kernel heap memory. Allocate the memory using kzalloc() to fix this issue. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16Bluetooth: RFCOMM - Fix info leak in getsockopt(BT_SECURITY)Mathias Krause
The RFCOMM code fails to initialize the key_size member of struct bt_security before copying it to userland -- that for leaking one byte kernel stack. Initialize key_size with 0 to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16Bluetooth: HCI - Fix info leak via getsockname()Mathias Krause
The HCI code fails to initialize the hci_channel member of struct sockaddr_hci and that for leaks two bytes kernel stack via the getsockname() syscall. Initialize hci_channel with 0 to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16Bluetooth: HCI - Fix info leak in getsockopt(HCI_FILTER)Mathias Krause
The HCI code fails to initialize the two padding bytes of struct hci_ufilter before copying it to userland -- that for leaking two bytes kernel stack. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16atm: fix info leak via getsockname()Mathias Krause
The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-16atm: fix info leak in getsockopt(SO_ATMPVC)Mathias Krause
The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15vmxnet3: Fix race between dev_open() and register_netdev()Steve Hodgson
dev_open() can complete before register_netdev() returns. Fix vmxnet3_probe_device() to support this. Signed-off-by: Steve Hodgson <steve@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15bridge: fix rcu dereference outside of rcu_read_lockStephen Hemminger
Alternative solution for problem found by Linux Driver Verification project (linuxtesting.org). As it noted in the comment before the br_handle_frame_finish function, this function should be called under rcu_read_lock. The problem callgraph: br_dev_xmit -> br_nf_pre_routing_finish_bridge_slow -> -> br_handle_frame_finish -> br_port_get_rcu -> rcu_dereference And in this case there is no read-lock section. Reported-by: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Alexey Khoroshilov provides a potential memory leak in rndis_wlan. Bob Copeland gives us an ath5k fix for a lockdep problem. Dan Carpenter fixes a signedness mismatch in at76c50x. Felix Fietkau corrects a regression caused by an earlier commit that can lead to an IRQ storm. Lorenzo Bianconi offers a fix for a bad variable initialization in ath9k that can cause it to improperly mark decrypted frames. Rajkumar Manoharan fixes ath9k to prevent the btcoex time from running when the hardware is asleep. The remainder are Bluetooth fixes, about which Gustavo says: "Here goes some fixes for 3.6-rc1, there are a few fix to thte inquiry code by Ram Malovany, support for 2 new devices, and few others fixes for NULL dereference, possible deadlock and a memory leak." ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lockBen Hutchings
Cong Wang reports that lockdep detected suspicious RCU usage while enabling IPV6 forwarding: [ 1123.310275] =============================== [ 1123.442202] [ INFO: suspicious RCU usage. ] [ 1123.558207] 3.6.0-rc1+ #109 Not tainted [ 1123.665204] ------------------------------- [ 1123.768254] include/linux/rcupdate.h:430 Illegal context switch in RCU read-side critical section! [ 1123.992320] [ 1123.992320] other info that might help us debug this: [ 1123.992320] [ 1124.307382] [ 1124.307382] rcu_scheduler_active = 1, debug_locks = 0 [ 1124.522220] 2 locks held by sysctl/5710: [ 1124.648364] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81768498>] rtnl_trylock+0x15/0x17 [ 1124.882211] #1: (rcu_read_lock){.+.+.+}, at: [<ffffffff81871df8>] rcu_lock_acquire+0x0/0x29 [ 1125.085209] [ 1125.085209] stack backtrace: [ 1125.332213] Pid: 5710, comm: sysctl Not tainted 3.6.0-rc1+ #109 [ 1125.441291] Call Trace: [ 1125.545281] [<ffffffff8109d915>] lockdep_rcu_suspicious+0x109/0x112 [ 1125.667212] [<ffffffff8107c240>] rcu_preempt_sleep_check+0x45/0x47 [ 1125.781838] [<ffffffff8107c260>] __might_sleep+0x1e/0x19b [...] [ 1127.445223] [<ffffffff81757ac5>] call_netdevice_notifiers+0x4a/0x4f [...] [ 1127.772188] [<ffffffff8175e125>] dev_disable_lro+0x32/0x6b [ 1127.885174] [<ffffffff81872d26>] dev_forward_change+0x30/0xcb [ 1128.013214] [<ffffffff818738c4>] addrconf_forward_change+0x85/0xc5 [...] addrconf_forward_change() uses RCU iteration over the netdev list, which is unnecessary since it already holds the RTNL lock. We also cannot reasonably require netdevice notifier functions not to sleep. Reported-by: Cong Wang <amwang@redhat.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15drivers/net/ethernet/mellanox/mlx4/mcg.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15drivers/net/ethernet/freescale/fs_enet: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14drivers/net/ethernet/ti/davinci_cpdma.c: Remove potential NULL dereferenceJulia Lawall
If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14llc: Fix races between llc2 handler use and (un)registrationBen Hutchings
When registering the handlers, any state they rely on must be completely initialised first. When unregistering, we must wait until they are definitely no longer running. llc_rcv() must also avoid reading the handler pointers again after checking for NULL. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14llc2: Call llc_station_exit() on llc2_init() failure pathBen Hutchings
Otherwise the station packet handler will remain registered even though the module is unloaded. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14llc2: Fix silent failure of llc_station_init()Ben Hutchings
llc_station_init() creates and processes an event skb with no effect other than to change the state from DOWN to UP. Allocation failure is reported, but then ignored by its caller, llc2_init(). Remove this possibility by simply initialising the state as UP. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: ipv6: proc: Fix error handlingIgor Maravic
Fix error handling in case making of dir dev_snmp6 failes Signed-off-by: Igor Maravic <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14ipv4: Cache local output routesYan, Zheng
Commit caacf05e5ad1abf causes big drop of UDP loop back performance. The cause of the regression is that we do not cache the local output routes. Each time we send a datagram from unconnected UDP socket, the kernel allocates a dst_entry and adds it to the rt_uncached_list. It creates lock contention on the rt_uncached_lock. Reported-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: sierra_net: replace whitelist with ifnumber matchBjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: compress device_id list using macrosBjørn Mork
Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: add Sierra Wireless devicesBjørn Mork
Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: use fixed interface number matchingBjørn Mork
This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netconsole.txt: revision of examples for the receiver of kernel messagesDirk Gouders
There are at least 4 implementations of netcat with the BSD-based being the only one that has to be used without the -p switch to specify the listening port. Jan Engelhardt suggested to add an example for socat(1). Signed-off-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: re-enable irq in poll_napi()Amerigo Wang
napi->poll() needs IRQ enabled, so we have to re-enable IRQ before calling it. Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: handle vlan tags in netpoll tx and rx pathAmerigo Wang
Without this patch, I can't get netconsole logs remotely over vlan. The reason is probably we don't handle vlan tags in either netpoll tx or rx path. I am not sure if I use these vlan functions correctly, at least this patch works. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14vlan: clean up vlan_dev_hard_start_xmit()Amerigo Wang
Clean up vlan_dev_hard_start_xmit() function. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14vlan: clean up some variable namesAmerigo Wang
To be consistent, s/info/vlan/. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: convert several functions to boolAmerigo Wang
These functions are just boolean, let them return bool instead of int. Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: check netpoll tx status on the right deviceAmerigo Wang
Although this doesn't matter actually, because netpoll_tx_running() doesn't use the parameter, the code will be more readable. For team_dev_queue_xmit() we have to move it down to avoid compile errors. Cc: David Miller <davem@davemloft.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14bridge: use list_for_each_entry() in netpoll functionsAmerigo Wang
We don't delete 'p' from the list in the loop, so we can just use list_for_each_entry(). Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14bridge: add some comments for NETDEV_RELEASEAmerigo Wang
Add comments on why we don't notify NETDEV_RELEASE. Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev()Amerigo Wang
This patch fixes several problems in the call path of netpoll_send_skb_on_dev(): 1. Disable IRQ's before calling netpoll_send_skb_on_dev(). 2. All the callees of netpoll_send_skb_on_dev() should use rcu_dereference_bh() to dereference ->npinfo. 3. Rename arp_reply() to netpoll_arp_reply(), the former is too generic. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use netpoll_rx_on() in netpoll_rx()Amerigo Wang
The logic of the code is same, just call netpoll_rx_on(). Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: take rcu_read_lock_bh() in netpoll_rx()Amerigo Wang
In __netpoll_rx(), it dereferences ->npinfo without rcu_dereference_bh(), this patch fixes it by using the 'npinfo' passed from netpoll_rx() where it is already dereferenced with rcu_dereference_bh(). Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netconsole: do not release spin_lock when calling __netpoll_cleanupAmerigo Wang
With the previous patch applied, __netpoll_cleanup() is non-block now, so we don't need to release the spin_lock before calling it. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: make __netpoll_cleanup non-blockAmerigo Wang
Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup() may be called with read_lock() held too, so we should make them non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()Amerigo Wang
slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-08-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
2012-08-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
2012-08-14GPIO: gpio-pxa: fix building without CONFIG_OFArnd Bergmann
Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v0.10.2 at 2024-10-21 02:39:47 (GMT)