summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-27Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Two tiny patches and one revert: - Kill a bogus error message introduced in 3.4, further Bspec reading indicates that this is how the hw is supposed to work. - Reorder one backlight register restore, fixing broken backlight on some machines after resume. - Revert a hack from Jesse for ivb backlight control - it breaks the backlight controls on my shiny new ivb laptop." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: allow PCH PWM override on IVB" drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN
2012-06-27Revert "drm/i915: allow PCH PWM override on IVB"Daniel Vetter
This reverts commit f82cfb6bcda164ef3a66b8c3fc549b1f9bdd09ad. This breaks the backlight controls on my IVB asus zenbook with an eDP panel. I guess the right fix would be to read this bit and use either the pch or the cpu register to frob the backlight values. But that is stuff for -next. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-27PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.Deepthi Dharwar
Commit e978aa7d7d57d04eb5f88a7507c4fb98577def77 ( cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state) was breaking suspend on laptops, as reported in the below link - https://lkml.org/lkml/2011/11/11/164 This was fixed in commit 3439a8da16bcad6b0982ece938c9f8299bb53584 (ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression) by removing acpi_idle_suspend flag. - https://lkml.org/lkml/2011/11/14/74 But this did fix did not work on all systems as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave. - https://lkml.org/lkml/2012/5/27/115 It looked like with commit e978aa7d broke suspend and with commit 3439a8da resume was not working with acpi_idle driver. This patch fixes the regression that caused this issue in the first place. acpi_idle_suspend flag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commit b04e7bdb984 ) So reverting the commit 3439a8da is essential. By default, irqs are disabled in cpu_idle arch specific call and re-enabled in idle state return path . During suspend, the acpi_idle_suspend flag is set, which prevents the cpus from going to deeper idle states, it is essential to enabling the irqs in this return path too. To address the suspend issue, we were not re-enabling the interrupts while returning from acpi_idle_enter_bm() routine if acpi_idle_suspend flag is set. and this caused suspend failure. In addition to the above, to improve the readability of the code, return of -ENIVAL is replaced with -EBUSY in acpi_idle_suspend return path. Implying that the system is currently busy when suspend is in progress, which prevents the cpus from entering deeper C-states. Reported-and-Tested-by: Dav Hansen <dave@linux.vnet.ibm.com> Tested-by: Preeti Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Reviewed-by: Srivatsa S Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-06-27ARM: OMAP4470: Fix OMAP4470 boot failureJon Hunter
OMAP4470 currently fails to boot, printing various messages such as ... omap_hwmod: mpu: cannot clk_get main_clk dpll_mpu_m2_ck omap_hwmod: mpu: cannot _init_clocks ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:2062 _init+0x2a0/0x2e4() omap_hwmod: mpu: couldn't init clocks Modules linked in: [<c001c7fc>] (unwind_backtrace+0x0/0xf4) from [<c0043c64>] (warn_slowpath_common+0x4c/0x64) [<c0043c64>] (warn_slowpath_common+0x4c/0x64) from [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) from [<c0674208>] (_init+0x2a0/0x2e4) [<c0674208>] (_init+0x2a0/0x2e4) from [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) from [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) from [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) from [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) from [<c0672c60>] (omap4_timer_init+0x10/0x5c) [<c0672c60>] (omap4_timer_init+0x10/0x5c) from [<c066c418>] (time_init+0x20/0x30) [<c066c418>] (time_init+0x20/0x30) from [<c0668814>] (start_kernel+0x1b0/0x304) [<c0668814>] (start_kernel+0x1b0/0x304) from [<80008044>] (0x80008044) ---[ end trace 1b75b31a2719ed1c ]--- The problem is that currently none of the clocks are being registered for OMAP4470 devices and so on boot-up no clocks can be found and the kernel panics. This fix allows the kernel to boot without failure using a simple RAMDISK file system on OMAP4470 blaze board. Per feedback from Paul and Benoit the 4470 clock data is incomplete for new modules such as the 2D graphics block that has been added to the 4470. Therefore add a warning to indicate that the clock data is incomplete. Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-27UBI: correct usage of IS_ENABLED()Brian Norris
Commit "e9b4cf2 UBI: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-27UBIFS: correct usage of IS_ENABLED()Brian Norris
Commit "818039c UBIFS: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-27can: flexcan: use be32_to_cpup to handle the value of dt entryHui Wang
The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: stable <stable@vger.kernel.org> # v3.2+ Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-27drm/nouveau: add license header to prime.Dave Airlie
Just forgot this when I posted it, and yes I'm the only person to have changed the file since. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-27xen/netfront: teardown the device before unregistering it.Ian Campbell
Fixes: [ 15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0() [ 15.470326] sysfs: kobject eth0 without dirent [ 15.470333] Modules linked in: [ 15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93 and [ 9.150554] BUG: unable to handle kernel paging request at 2b359000 [ 9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0 [ 9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000 [ 9.150604] Oops: 0002 [#1] SMP [ 9.150613] Modules linked in: This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190 Reported-by: George Shuklin <george.shuklin@gmail.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: William Dauchy <wdauchy@gmail.com> Cc: stable@kernel.org Cc: 675190@bugs.debian.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)stephen hemminger
This ensures that bridges created with brctl(8) or ioctl(2) directly also carry IFLA_LINKINFO when dumped over netlink. This also allows to create a bridge with ioctl(2) and delete it with RTM_DELLINK. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27vhost: use USER_DS in vhost_worker threadJens Freimann
On some architectures address spaces are set up in a way that this is not necessary to work properly but on some others (like s390) it is. Make sure we operate on the user address space to allow copy_xxx_user() from the vhost_worker() thread by setting it explicitly before calling use_mm() and revert it after unuse_mm(). Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entrySachin Kamat
Commit 20ef9e08 ("ARM: EXYNOS: Support DMA for EXYNOS5250 SoC") renamed EXYNOS4_DEV_DMA to EXYNOS_DEV_DMA. But some machine entries still had EXYNOS4_DEV_DMA. Changed them to EXYNOS_DEV_DMA. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-06-26ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDPAlexander Duyck
FCoE target mode was experiencing issues due to the fact that we were sending up data frames that were padded to 60 bytes after the DDP logic had already stripped the frame down to 52 or 56 depending on the use of VLANs. This was resulting in the FCoE DDP logic having issues since it thought the frame still had data in it due to the padding. To resolve this, adding code so that we do not pad FCoE frames prior to handling them to the stack. CC: <stable@vger.kernel.org> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26net: l2tp_eth: use LLTX to avoid LOCKDEP splatsEric Dumazet
Denys Fedoryshchenko reported a LOCKDEP issue with l2tp code. [ 8683.927442] ====================================================== [ 8683.927555] [ INFO: possible circular locking dependency detected ] [ 8683.927672] 3.4.1-build-0061 #14 Not tainted [ 8683.927782] ------------------------------------------------------- [ 8683.927895] swapper/0/0 is trying to acquire lock: [ 8683.928007] (slock-AF_INET){+.-...}, at: [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [ 8683.928121] but task is already holding lock: [ 8683.928121] (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] which lock already depends on the new lock. [ 8683.928121] [ 8683.928121] [ 8683.928121] the existing dependency chain (in reverse order) is: [ 8683.928121] [ 8683.928121] -> #1 (_xmit_ETHER#2){+.-...}: [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<c0304e0c>] ip_send_reply+0xf2/0x1ce [ 8683.928121] [<c0317dbc>] tcp_v4_send_reset+0x153/0x16f [ 8683.928121] [<c0317f4a>] tcp_v4_do_rcv+0x172/0x194 [ 8683.928121] [<c031929b>] tcp_v4_rcv+0x387/0x5a0 [ 8683.928121] [<c03001d0>] ip_local_deliver_finish+0x13a/0x1e9 [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c030075b>] ip_local_deliver+0x41/0x45 [ 8683.928121] [<c03005dd>] ip_rcv_finish+0x31a/0x33c [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c0300960>] ip_rcv+0x201/0x23d [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02deae8>] netif_receive_skb+0x4e/0x7d [ 8683.928121] [<e08d5ef3>] rtl8139_poll+0x243/0x33d [8139too] [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] -> #0 (slock-AF_INET){+.-...}: [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] other info that might help us debug this: [ 8683.928121] [ 8683.928121] Possible unsafe locking scenario: [ 8683.928121] [ 8683.928121] CPU0 CPU1 [ 8683.928121] ---- ---- [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] [ 8683.928121] *** DEADLOCK *** [ 8683.928121] [ 8683.928121] 3 locks held by swapper/0/0: [ 8683.928121] #0: (rcu_read_lock){.+.+..}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #1: (rcu_read_lock_bh){.+....}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #2: (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] stack backtrace: [ 8683.928121] Pid: 0, comm: swapper/0 Not tainted 3.4.1-build-0061 #14 [ 8683.928121] Call Trace: [ 8683.928121] [<c034bdd2>] ? printk+0x18/0x1a [ 8683.928121] [<c0158904>] print_circular_bug+0x1ac/0x1b6 [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [<c012b23a>] ? local_bh_enable+0xd/0xd [ 8683.928121] <IRQ> [<c012b4d0>] ? irq_exit+0x41/0x91 [ 8683.928121] [<c0103c6f>] ? do_IRQ+0x79/0x8d [ 8683.928121] [<c0157ea1>] ? trace_hardirqs_off_caller+0x2e/0x86 [ 8683.928121] [<c034ef6e>] ? common_interrupt+0x2e/0x34 [ 8683.928121] [<c0108a33>] ? default_idle+0x23/0x38 [ 8683.928121] [<c01091a8>] ? cpu_idle+0x55/0x6f [ 8683.928121] [<c033df25>] ? rest_init+0xa1/0xa7 [ 8683.928121] [<c033de84>] ? __read_lock_failed+0x14/0x14 [ 8683.928121] [<c0498745>] ? start_kernel+0x303/0x30a [ 8683.928121] [<c0498209>] ? repair_env_string+0x51/0x51 [ 8683.928121] [<c04980a8>] ? i386_start_kernel+0xa8/0xaf It appears that like most virtual devices, l2tp should be converted to LLTX mode. This patch takes care of statistics using atomic_long in both RX and TX paths, and fix a bug in l2tp_eth_dev_recv(), which was caching skb->data before a pskb_may_pull() call. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Cc: James Chapman <jchapman@katalix.com> Cc: Hong zhi guo <honkiko@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26USB: CP210x Add 10 Device IDsCraig Shelley
This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26USB: option: Add USB ID for Novatel Ovation MC551Forest Bond
This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Acked-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26usb: phy: Fix Kconfig dependency for Phy driversAlexandre Pereira da Silva
USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26Revert "mmc: omap_hsmmc: Enable Auto CMD12"Ming Lei
This patch reverts the commit dba3c29ea4a1d5d544. After bisecting, this commit dba3c29 is found to ruin micro-SD card data (writing incorrect file, or fs is corrupt after several times mount) on the beagle-xm revB, and reverting the commit will fix the problem. Also from TRM of OMAP3/OMAP4/DM37x, the below is mentioned about the Auto CMD12 Enable bit. - SDIO does not support this feature. - SD card only. Looks it is not suitable to always enable Auto CMD12 in host controller driver. Considered that the commit is not mature enough, so ask to revert it first. Cc: Balaji T K <balajitk@ti.com> Cc: Venkatraman S <svenkatr@ti.com> Buglink: https://lkml.org/lkml/2012/6/10/225 Reported-by: Paolo Pisati <p.pisati@gmail.com> Reported-bisected-and-tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-26mmc: block: fix the data timeout issue with ACMD22Subhash Jadavani
If multi block write operation fails for SD card, during error handling we send the SD_APP_SEND_NUM_WR_BLKS (ACMD22) to know how many blocks were already programmed by card. But mmc_sd_num_wr_blocks() function which sends the ACMD22 calculates the data timeout value from csd.tacc_ns and csd.tacc_clks parameters which will be 0 for block addressed (>2GB cards) SD card. This would result in timeout_ns and timeout_clks being 0 in the mmc_request passed to host driver. This means host controller would program its data timeout timer value with 0 which could result in DATA TIMEOUT errors from controller. To fix this issue, mmc_sd_num_wr_blocks() should instead just call the mmc_set_data_timeout() to calculate the data timeout value. mmc_set_data_timeout() function ensures that non zero timeout value is set even for block addressed SD cards. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-26syslog: fill buffer with more than a single message for SYSLOG_ACTION_READJan Beulich
The recent changes to the printk buffer management resulted in SYSLOG_ACTION_READ to only return a single message, whereas previously the buffer would get filled as much as possible. As, when too small to fit everything, filling it to the last byte would be pretty ugly with the new code, the patch arranges for as many messages as possible to get returned in a single invocation. User space tools in at least all SLES versions depend on the old behavior. This at once addresses the issue attempted to get fixed with commit b56a39ac263e5b8cafedd551a49c2105e68b98c2 ("printk: return -EINVAL if the message len is bigger than the buf size"), and since that commit widened the possibility for losing a message altogether, the patch here assumes that this other commit would get reverted first (otherwise the patch here won't apply). Furthermore, this patch also addresses the problem dealt with in commit 4a77a5a06ec66ed05199b301e7c25f42f979afdc ("printk: use mutex lock to stop syslog_seq from going wild"), so I'd recommend reverting that one too (albeit there's no direct collision between the two). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Kay Sievers <kay@vrfy.org> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26Revert "printk: return -EINVAL if the message len is bigger than the buf size"Greg Kroah-Hartman
This reverts commit b56a39ac263e5b8cafedd551a49c2105e68b98c2. A better patch from Jan will follow this to resolve the issue. Acked-by: Kay Sievers <kay@vrfy.org> Cc: Fengguang Wu <wfg@linux.intel.com> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Just two changes: one udl endian fix, one nouveau memory corruption on some GPUs." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/fbcon: using nv_two_heads is not a good idea drm/udl: Make sure to get correct endian keys from vendor descriptor
2012-06-26Merge branch 'upstream-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "The most important one is a purification of Kconfig for CONFIG_HID; the inclusion of HID groups and autoloading didn't leave the Kconfig in a really consistent state. Henrik's patch fixes that. In addition to that, there are two small fixes for logitech and magicmouse drivers." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Fix the generic Kconfig options HID: magicmouse: Correct report range of major / minor axes HID: logitech: don't use stack based dj_report structures
2012-06-26ALSA: hda - Fix power-map regression for HP dv6 & coTakashi Iwai
The recent fix for power-map controls (commit b0791dda813) caused regressions on some other HP laptops. They have fixed pins but these pins are exposed as jack-detectable. Thus the driver tries to control the power-map dynamically per jack detection where it never gets on. This patch adds the check of connection and it assumes the no jack detection is available for fixed pins no matter what pin capability says. BugLink: http://bugs.launchpad.net/bugs/1013183 Reported-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-26x86, cpufeature: Remove stray %s, add -w to mkcapflags.plH. Peter Anvin
There was a stray %s left from testing, remove it. Add -w to the #! line (which is parsed by Perl even if the Perl interpreter is invoked explicitly on the command line) to catch these kinds of errors in the future. Reported-by: Jean Delvare <khali@linux-fr.org> Link: http://lkml.kernel.org/r/20120626143246.0c9bf301@endymion.delvare Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-06-26ALSA: hda - Initialize caches at codec reconfigurationTakashi Iwai
Better to clean up the caches for avoiding inconsistent codec state after the reconfiguration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-26ALSA: hda - Fix memory leaks at module unloadTakashi Iwai
Some caches aren't released properly at module unloading time. Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-26ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsersTakashi Iwai
When moved to the helper code, forgot to release the verb arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-26drm/nouveau/fbcon: using nv_two_heads is not a good ideaBen Skeggs
nv_two_heads() was never meant to be used outside of pre-nv50 code. The code checks for >= NV_10 for 2 CRTCs, then downgrades a few specific chipsets to 1 CRTC based on (pci_device & 0x0ff0). The breakage example seen is on GTX 560Ti, with a pciid of 0x1200, which gets detected as an NV20 (0x020x) with 1 CRTC by nv_two_heads(), causing memory corruption because there's actually 2 CRTCs.. This switches fbcon to use the CRTC count directly from the mode_config structure, which will also fix the same issue on Kepler boards which have 4 CRTCs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-26ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=nKevin Hilman
commit 8259573b (ARM: OMAP2+: nand: Make board_onenand_init() visible to board code) broke the build for configs with OneNAND disabled. By removing the static in the header file, it created a duplicate definition in the .c and the .h files, resuling in a build error: /work/kernel/omap/dev/arch/arm/mach-omap2/board-flash.c:102:111: error: redefinition of 'board_onenand_init' /work/kernel/omap/dev/arch/arm/mach-omap2/board-flash.h:56:51: note: previous definition of 'board_onenand_init' was here make[2]: *** [arch/arm/mach-omap2/board-flash.o] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [arch/arm/mach-omap2] Error 2 make: *** [sub-make] Error 2 Fix this by removing the duplicate dummy entry from the C file. Cc: Enric Balletbò i Serra <eballetbo@gmail.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-25clk: mxs: fix clock lookup after freeing init memoryMarc Kleine-Budde
The struct clk_lookup are marked as __initdata, resulting in being removed from memory after the kernel finished booting. However this leads to a NULL pointer de-ref if loading a module which uses clk_get. This patch removes the __initdata from the struct clk_lookup. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-06-25clk: mxs: fix ref_io clock definitionShawn Guo
The definition of clocks ref_io0 and ref_io1 were inverted. It causes a mmc regression on some boards right away. Fix the regression by correcting the ref_io clock definition. Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-06-25clk: Check parent for NULL in clk_change_ratePawel Moll
clk_change_rate() is accessing parent's rate without checking if the parent exists at all. In case of root clocks this will cause NULL pointer dereference. This patch follows what clk_calc_new_rates() does in such situation. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@kernel.org
2012-06-25clk: Allow late cache allocation for clk->parentsRajendra Nayak
Parent clocks for muxes are cached in clk->parents to avoid frequent lookups, however the cache allocation happens only during clock registeration and later clk_set_parent() assumes a cache space available and allocated. This is not entirely true for platforms which do early clock registerations wherein the cache allocation using kzalloc could fail during clock registeration. Allow cache allocation to happen later as part of clk_set_parent() to help such cases and avoid crashes assuming a cache being available. While here also replace existing kmalloc() with kzalloc() in the file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@kernel.org
2012-06-25clk: SPEAr600: Fix ethernet clock name for DT based probingStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-06-25mac802154: add missed bracesalex.bluesman.smirnov@gmail.com
Add missed braces after 'if' operator. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net: l2tp_eth: fix l2tp_eth_dev_xmit raceEric Dumazet
Its illegal to dereference skb after giving it to l2tp_xmit_skb() as it might be already freed/reused. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net/mlx4_en: Release QP range in free_resourcesYevgeny Petrilin
Add a missing resource release in ring cleanup. Not doing this leaves a range of QPs that are being reserved, and no one can use them. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net/mlx4: Use single completion vector after NOP failureYevgeny Petrilin
Fix a crash at the error flow of NOP command which caused the driver to try and use a completion vector which wasn't allocated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net/mlx4_en: Set correct port parameters during device initializationYevgeny Petrilin
Set valid port parameters: MTU and flow control configuration when configuring the port during HW device initialization, prior to the net device open() being called. Using invalid parameters (such as all zeros) could lead to bad firmware behavior. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25ipheth: add support for iPadDavide Gerhard
This adds support for the iPad to the ipheth driver. (product id = 0x129a) Signed-off-by: Davide Gerhard <rainbow@irh.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25caif-hsi: Add missing return in error pathSjur Brændeland
Fix a missing return, causing access to freed memory. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lostPer Ellefsen
When receiving a piggyback'ed descriptor containing an embedded frame, but no payload, the embedded frame was lost. Signed-off-by: Per Ellefsen <per.ellefsen@stericsson.com> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25caif: Clear shutdown mask to zero at reconnect.Sjur Brændeland
Clear caif sockets's shutdown mask at (re)connect. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request()Neal Cardwell
If security_inet_conn_request() returns non-zero then TCP/IPv6 should drop the request, just as in TCP/IPv4 and DCCP in both IPv4 and IPv6. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25ipv6: fib: fix fib dump restartEric Dumazet
Commit 2bec5a369ee79576a3 (ipv6: fib: fix crash when changing large fib while dumping it) introduced ability to restart the dump at tree root, but failed to skip correctly a count of already dumped entries. Code didn't match Patrick intent. We must skip exactly the number of already dumped entries. Note that like other /proc/net files or netlink producers, we could still dump some duplicates entries. Reported-by: Debabrata Banerjee <dbavatar@gmail.com> Reported-by: Josh Hunt <johunt@akamai.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab. Trivial conflict due to new USB HID ID's being added next to each other (Baanto vs Axentia). * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits) [media] smia: Fix compile failures [media] Fix VIDIOC_DQEVENT docbook entry [media] s5p-fimc: Fix control creation function [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file [media] s5p-mfc: Fix setting controls [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT [media] v4l/s5p-mfc: corrected encoder v4l control definitions [media] v4l: mem2mem_testdev: Fix race conditions in driver [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism [media] cxd2820r: Fix an incorrect modulation type bitmask [media] em28xx: Show a warning if the board does not support remote controls [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD [media] USB: Staging: media: lirc: initialize spinlocks before usage [media] Revert "[media] media: mx2_camera: Fix mbus format handling" [media] bw-qcam: driver and pixfmt documentation fixes [media] cx88: fix firmware load on big-endian systems [media] cx18: support big-endian systems [media] ivtv: fix support for big-endian systems [media] tuner-core: return the frequency range of the correct tuner [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls() ...
2012-06-25rcu: Stop rcu_do_batch() from multiplexing the "count" variablePaul E. McKenney
Commit b1420f1c (Make rcu_barrier() less disruptive) rearranged the code in rcu_do_batch(), moving the ->qlen manipulation to follow the requeueing of the callbacks. Unfortunately, this rearrangement clobbered the value of the "count" local variable before the value of rdp->qlen was adjusted, resulting in the value of rdp->qlen being inaccurate. This commit therefore introduces an index variable "i", avoiding the inadvertent multiplexing. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-06-25ALSA: hda - Add Realtek ALC280 codec supportDavid Henningsson
This chip looks very similar to ALC269 and ALC27* variants. The bug reporter has verified that sound was working after this patch had been applied. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1017017 Tested-by: Richard Crossley <richardcrossley@o2.co.uk> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25printk: fix regression in SYSLOG_ACTION_CLEARAlan Stern
Commit 7ff9554bb578ba02166071d2d487b7fc7d860d62 (printk: convert byte-buffer to variable-length record buffer) introduced a regression by accidentally removing a "break" statement from inside the big switch in printk's do_syslog(). The symptom of this bug is that the "dmesg -C" command doesn't only clear the kernel's log buffer; it also disables console logging. This patch (as1561) fixes the regression by adding the missing "break". Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v0.10.2 at 2024-11-21 09:52:22 (GMT)