summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-27MIPS: Loongson: Change the Email address of Wu ZhangjinWu Zhangjin
Currently wuzj@lemote.com is not usable; change it to wuzhangjin@gmail.com. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/829/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Fixup mem.c indentationWu Zhangjin
Replace whitespace by tabs. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: arch/mips/Makefile: Add missing whitespaceWu Zhangjin
This patch add missing whitespace after every "+=" in the loongson related part of arch/mips/Makefile. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/827/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Cleanup of the environment variablesWu Zhangjin
Changes: o Move bus_clock into prom_init_env() o Initialize the cpu_clock_freq to the default values for the correspoding processor revisions if no such environment variable passed by BIOS/Bootloader. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/826/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Move prom_argc and prom_argv into prom_init_cmdline()Wu Zhangjin
prom_argc and prom_argv are only used by prom_init_cmdline(), move them into the function. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/825/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Remove the serial port output of compressed kernel supportWu Zhangjin
The compressed kernel support on loongson family machines is stable now, so, remove the debug information via using SYS_SUPPORTS_ZBOOT instead of SYS_SUPPORTS_ZBOOT_UART16550. This may reduce the image size and speedup the booting. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/824/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Convert loongson_halt() to use unreachable()Wu Zhangjin
Use the new unreachable() macro instead of while(1); Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/823/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Lemote-2F: USB: Not Emulate Non-Posted WritesWu Zhangjin
Without this patch, when copying large amounts of data between the USB storage devices and the hard disk, the USB device will disconnect regularly. Signed-off-by: Hu Hongbing <huhb@lemote.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Patchwork: http://patchwork.linux-mips.org/patch/822/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Loongson: Lemote-2F: Get the machine type from PMON_VERWu Zhangjin
Lemote have used the PMON_VER strings to indicate the loongson-2f machine series: PMON_VER=LM8089 Lemote 8.9'' netbook LM8101 Lemote 10.1'' netbook (The above two netbooks have the same kernel support) LM6XXX Lemote FuLoong(2F) box series LM9XXX Lemote LynLoong PC series Before the machtype is supported by the PMON, we can get the machine type from the PMON_VER for these machines, this will help the users a lot. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/821/ Patchwork: http://patchwork.linux-mips.org/patch/908/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Use constants from in.hDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/837/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Enable scatter-gather.David Daney
Octeon ethernet hardware can handle NETIF_F_SG, so we enable it. A gather list of up to six fragments will fit in the SKB's CB structure, so no extra memory is required. If a SKB has more than six fragments, we must linearize it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Convert to NAPI.David Daney
Convert the driver to be a reasonably well behaved NAPI citizen. There is one NAPI instance per CPU shared between all input ports. As receive backlog increases, NAPI is scheduled on additional CPUs. Receive buffer refill code factored out so it can also be called from the periodic timer. This is needed to recover from temporary buffer starvation conditions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/839/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Rewrite transmit code.David Daney
Stop the queue if too many packets are queued. Restart it from a high resolution timer. Rearrange and simplify locking and SKB freeing code Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/843/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Fix memory allocation.David Daney
After aligning the blocks returned by kmalloc, we need to save the original pointer so they can be correctly freed. There are no guarantees about the alignment of SKB data, so we need to handle worst case alignment. Since right shifts over subtraction have no distributive property, we need to fix the back pointer calculation. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/884/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Staging: Octeon Ethernet: Remove unused code.David Daney
Remove unused code, reindent, and join some spilt strings. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Fix EOI handling.David Daney
If an interrupt handler disables interrupts, the EOI function will just reenable them. This will put us in an endless loop when the upcoming Ethernet driver patches are applied. Only reenable the interrupt on EOI if it is not IRQ_DISABLED. This requires that the EOI function be separate from the ENABLE function. We also rename the ACK functions to correspond with their function. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: gregkh@suse.de Patchwork: http://patchwork.linux-mips.org/patch/840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Use optimized memory barrier primitives.David Daney
In order to achieve correct synchronization semantics, the Octeon port had defined CONFIG_WEAK_REORDERING_BEYOND_LLSC. This resulted in code that looks like: sync ll ... . . . sc ... . . sync The second SYNC was redundant, but harmless. Octeon has a SYNCW instruction that acts as a write-memory-barrier (due to an erratum in some parts two SYNCW are used). It is much faster than SYNC because it imposes ordering on the writes, but doesn't otherwise stall the execution pipeline. On Octeon, SYNC stalls execution until all preceeding writes are committed to the coherent memory system. Using: syncw;syncw ll . . . sc . . Has identical semantics to the first sequence, but is much faster. The SYNCW orders the writes, and the SC will not complete successfully until the write is committed to the coherent memory system. So at the end all preceeding writes have been committed. Since Octeon does not do speculative reads, this functions as a full barrier. The patch removes CONFIG_WEAK_REORDERING_BEYOND_LLSC, and substitutes SYNCW for SYNC in write-memory-barriers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/850/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: New macro smp_mb__before_llsc.David Daney
Replace some instances of smp_llsc_mb() with a new macro smp_mb__before_llsc(). It is used before ll/sc sequences that are documented as needing write barrier semantics. The default implementation of smp_mb__before_llsc() is just smp_llsc_mb(), so there are no changes in semantics. Also simplify definition of smp_mb(), smp_rmb(), and smp_wmb() to be just barrier() in the non-SMP case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/851/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Remove unused macros from barrier.hDavid Daney
The smp_llsc_rmb() and smp_llsc_wmb() macros are not used in the tree, remove them. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/848/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Register some devices on the I2C bus.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: Rade Bozic <rade.bozic.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/845/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: I2C: Add driver for Cavium OCTEON I2C ports.Rade Bozic
Signed-off-by: Rade Bozic <rade.bozic.ext@nsn.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: rade.bozic.ext@nsn.com Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Add I2C platform device.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: Rade Bozic <rade.bozic.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/847/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Simplify param.h by using <asm-generic/param.h>Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: get rid of common/reset.cManuel Lauss
Implement reset / poweroff in the board code instead. The peripheral reset code is gone too since YAMON which all in-tree boards use does the same work when it boots. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/783/ Patchwork: http://patchwork.linux-mips.org/patch/882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Two-level pagetables for 64-bit kernels with 64KB pages.David Daney
For 64-bit kernels with 64KB pages and two level page tables, there are 42 bits worth of virtual address space This is larger than the 40 bits of virtual address space obtained with the default 4KB Page size and three levels, so there are no draw backs for using two level tables with this configuration. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: irq: use runtime CPU type detectionManuel Lauss
Use runtime CPU detection instead of relying on preprocessor symbols. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/701/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Only build AU1000 INTC code for compatible cpusManuel Lauss
Use the GPIO config symbol to only build Au1000 interrupt code on chips with compatible hw. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: use runtime cpu detection in GPIO code.Manuel Lauss
Remove the cpu subtype cpp macros in favor of runtime detection, to improve compile coverage of the alchemy common code. (Increases kernel size by 700 bytes). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27NET: au1000-eth: Convert to platform_driver modelFlorian Fainelli
This patch converts the au1000-eth driver to become a full platform-driver as it ought to be. We now pass PHY-speficic configurations through platform_data but for compatibility the driver still assumes the default settings (search for PHY1 on MAC0) when no platform_data is passed. Tested on my MTX-1 board. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: http://patchwork.linux-mips.org/patch/619/ Patchwork: http://patchwork.linux-mips.org/patch/963/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Add au1000-eth platform deviceFlorian Fainelli
This patch makes the board code register the au1000-eth platform device. The au1000-eth platform data can be overriden with the au1xxx_override_eth_cfg function like it has to be done for the Bosporus board which uses a different MAC/PHY setup. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: David Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/618/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: DB1200 defconfig updateManuel Lauss
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS/SOUND: Alchemy: DB1200 AC97+I2S audio support.Manuel Lauss
Machine driver for DB1200 AC97 and I2S audio systems, intended as a proper reference asoc machine for Alchemy-based systems. AC97/I2S can be selected at boot time by setting switch S6.7. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: alsa-devel@alsa-project.org Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Extended DB1200 board support.Manuel Lauss
Create own directory for DB1200 code and update it with new features. - SPI support: - tmp121 temperature sensor - SPI flash on DB1200 - I2C support - NE1619 sensor - AT24 eeprom - I2C/SPI can be selected at boot time via switch S6.8 - Carddetect IRQs for SD cards. - gen_nand based NAND support. - hexleds count sleep/wake transitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: physmap-flash for all devboardsManuel Lauss
Replace the devboard NOR MTD mapping driver with physmap-flash support. Also honor the "swapboot" switch settings wrt. to the layout of the NOR partitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Don't include <linux/smp_lock.h> unnecessarily.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27SERIAL 8250: Fixes for Alchemy UARTs.Manuel Lauss
Limit the amount of address space claimed for Alchemy serial ports to 0x1000. On the Au1300, ports are only 0x1000 apart, and the registers only extend to 0x110 at most on all supported alchemy models. On the Au1300 the autodetect logic no longer works and this makes it necessary to specify the port type through platform data. Because of this the MSR quirk needs to be moved outside the autoconfig() function which will no longer be called when UPF_FIXED_TYPE is specified. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: UARTs are of type 16550AManuel Lauss
UART autodetection breaks on the Au1300 but the IP blocks are identical, at least according to the datasheets. Help the 8250 driver by passing on uart type information via platform data. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Turn on -Werror for devboards and xss1500Florian Fainelli
Warnings being suppressed, we can now turn on -Werror for boards which did not have it already (devboards and xss1500). Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Fix warnings in DB1x00 / PB1000 / PB1550 board setup codeFlorian Fainelli
This patch fixes warnings due to potentially unused variables in board setup code or mixed variables declaration and code (forbidden by ISO C90). Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove unused SYS area structureManuel Lauss
Nothing in-tree uses it, so get rid of it. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: get rid of superfluous UART definitionsManuel Lauss
Remove unused uart bit definitions and base macros. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: prom_putchar is board dependentManuel Lauss
This patch replaces the general alchemy prom_putchar() implementation in favor of board-specific versions: The UART where the output of prom_putchar is directed to really depends on the board, the current implementation hardcodes this on a per-SoC basis which is just wrong. So a generic uart tx function is provided in the alchemy headers, and the boards can provide their own prom_putchar with custom destination uart, and all in-kernel alchemy boards support early printk. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: change dbdma to accept physical memory addressesManuel Lauss
DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove dbdma compat macrosManuel Lauss
Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: reduce size of irq dispatcherManuel Lauss
By replacing an extra do_IRQ with a goto, the assembly shrinks from 260 to 212 bytes (gcc-4.3.4). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Stop IRQ name sharingManuel Lauss
Eliminate the sharing of IRQ names among the differenct Alchemy variants. IRQ numbers need no longer be hidden behind a CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy code less reliant on a hardcoded subtype. This patch also renames the GPIO irq number constants. It's really an interrupt line, NOT a GPIO number! Code which relied on certain irq numbers to have the same name across all supported cpu subtypes is changed to determine current cpu subtype at runtime; in some places this isn't possible so a "compat" symbol is used. Run-tested on DB1200. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Simple cpu subtype detectorManuel Lauss
Extract the alchemy chip variant from c0_prid register. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/14/ Patchwork: http://patchwork.linux-mips.org/patch/707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: higher priority for system timer.Manuel Lauss
Raise RTCMATCH2 interrupt priority in case it is used as the system timer tick. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Remove USB_DEV_REQ_INT prioritization hackManuel Lauss
The Alchemy hardware provides a method to prioritize interrupts on a controller by assigning them to a differenct core request line. Assign usb device request interrupt to IC0 Request 0 (which has highest priority in the core and the dispatcher) and others to Request 1. The explicit check for usb device request occurrence should be obsolete now. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: XXS1500 PCMCIA driver rewriteManuel Lauss
Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v0.10.2 at 2024-08-16 15:09:17 (GMT)