summaryrefslogtreecommitdiff
path: root/arch/arm/mach-realview
AgeCommit message (Collapse)Author
2006-12-10i2c: New ARM Versatile/Realview bus driverRussell King
Add support for the I2C bus found on the ARM Versatile and Realview platforms. The I2C bus has a RTC and optionally some EEPROMs attached. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-05-16[ARM] 3527/1: MPCore Boot Lockup FixHarry Fearnhamm
Patch from Harry Fearnhamm This patch fixes the occasional lockup seen in early boot stage on RealView MPCore system. Signed-off-by: Harry Fearnhamm <Harry.Fearnhamm@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-16[ARM] 3367/1: CLCD mode no longer supported on the RealView boardsCatalin Marinas
Patch from Catalin Marinas Chosing of the CLCD RGB mode is no longer possible via the SYS_CLCD register on the RealView boards. Instead, this configuration is done in the CLCD primecell control register directly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16[ARM] Fix SMP initialisation oopsRussell King
A change to the SMP initialisation caused the following oops: CPU1: Booted secondary processor CPU1: D VIPT write-back cache CPU1: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU1: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets <7>Calibrating delay loop... 83.14 BogoMIPS (lpj=415744) <1>Unable to handle kernel NULL pointer dereference at virtual address 0000001c ... PC is at enqueue_task+0x1c/0x64 LR is at activate_task+0xcc/0xe4 SMP initialisation now requires cpu_possible_map to be initialised in setup_arch(). Move this from smp_prepare_cpus() to smp_init_cpus() and call it from our setup_arch() if CONFIG_SMP is enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3313/1: Use OSC4 instead of OSC1 for CLCDCatalin Marinas
Patch from Catalin Marinas Because of a type, OSC1 was used for setting the display clock instead of OSC4. This patch fixes it. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13[ARM] Remove useless 'default n' from Kconfig filesRussell King
The default is already 'n' so there's no need to explicitly state it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13[ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)Nicolas Pitre
Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-12[ARM] Convert some arm semaphores to mutexesArjan van de Ven
The arm clock semaphores are strict mutexes, convert them to the new mutex implementation Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09[PATCH] fix more missing includesTim Schmielau
Include fixes for 2.6.14-git11. Should allow to remove sched.h from module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more to come since I haven't yet checked the other archs. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07[ARM] Move AMBA include files to include/linux/amba/Russell King
Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03[ARM] Remove clk_use()/clk_unuse()Russell King
It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-25[ARM] Realview core.c does not need mach-types.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16[ARM] Fix arch-realview/system.h to use __io_address()Russell King
Move __io_address to arch-realview/hardware.h, drop core.h from platsmp.c and localtimer.c, and include asm/io.h where required. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09[ARM SMP] Add CPU hotplug support for Realview MPcoreRussell King
Add platform specific parts for hotplug CPU support for the Realview board. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-09[ARM SMP] Add local timer support for Realview MPcoreRussell King
Add platform specific parts for local timer support for the Realview board. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08[ARM SMP] Fix some sparse warnings in SMP codeRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08[ARM SMP] Add missing SMP timer handling for realviewRussell King
Until we have local timer support, we need to broadcast the timer interrupt to the other CPUs. Also, add the missing smp_send_timer() prototype to asm/smp.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07[ARM SMP] Add Realview MPcore SMP supportRussell King
Add SMP support for the MPcore tile fitted to the Realview ARM platform. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07[ARM] Add support for Realview with MPcore tileRussell King
Add uniprocessor support for Realview platform fitted with the MPcore (SMP) tile. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07[ARM] realview core.h uses leds_event_t, so include asm/leds.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02[ARM] Fix Realview machine for patch 3016/1Russell King
3016/1 changed the map_desc structure to take a PFN instead of a physical address. Fixup Realview machine support for this change. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-31[ARM] Fixup platform device.h includes for realview boardRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-31[ARM] Add support for ARM RealView boardCatalin Marinas
Support for RealView EB. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>