summaryrefslogtreecommitdiff
path: root/arch/arm/net
AgeCommit message (Collapse)Author
2013-05-20arm: bpf_jit: can call module_free() from any contextDaniel Borkmann
Follow-up on module_free()/vfree() that takes care of the rest, so no longer this workaround with work_struct needed. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21filter: bpf_jit_comp: refactor and unify BPF JIT image dump outputDaniel Borkmann
If bpf_jit_enable > 1, then we dump the emitted JIT compiled image after creation. Currently, only SPARC and PowerPC has similar output as in the reference implementation on x86_64. Make a small helper function in order to reduce duplicated code and make the dump output uniform across architectures x86_64, SPARC, PPC, ARM (e.g. on ARM flen, pass and proglen are currently not shown, but would be interesting to know as well), also for future BPF JIT implementations on other archs. Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Matt Evans <matt@ozlabs.org> Cc: Eric Dumazet <eric.dumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12ARM:net: an issue for k which is u32, never < 0Chen Gang
k is u32 which never < 0, need type cast, or cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-14ARM: net: bpf_jit: fix emit_swap16() for non ARMv6+.Nicolas Schichan
The original code was generating an lsl instructions using the value of ARM_R8 (skb_headlen, possibly uninitialized if no skb_headlen access was required) as a shift amount. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Mircea Gherzan <mgherzan@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) Allow to dump, monitor, and change the bridge multicast database using netlink. From Cong Wang. 2) RFC 5961 TCP blind data injection attack mitigation, from Eric Dumazet. 3) Networking user namespace support from Eric W. Biederman. 4) tuntap/virtio-net multiqueue support by Jason Wang. 5) Support for checksum offload of encapsulated packets (basically, tunneled traffic can still be checksummed by HW). From Joseph Gasparakis. 6) Allow BPF filter access to VLAN tags, from Eric Dumazet and Daniel Borkmann. 7) Bridge port parameters over netlink and BPDU blocking support from Stephen Hemminger. 8) Improve data access patterns during inet socket demux by rearranging socket layout, from Eric Dumazet. 9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and Jon Maloy. 10) Update TCP socket hash sizing to be more in line with current day realities. The existing heurstics were choosen a decade ago. From Eric Dumazet. 11) Fix races, queue bloat, and excessive wakeups in ATM and associated drivers, from Krzysztof Mazur and David Woodhouse. 12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions in VXLAN driver, from David Stevens. 13) Add "oops_only" mode to netconsole, from Amerigo Wang. 14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also allow DCB netlink to work on namespaces other than the initial namespace. From John Fastabend. 15) Support PTP in the Tigon3 driver, from Matt Carlson. 16) tun/vhost zero copy fixes and improvements, plus turn it on by default, from Michael S. Tsirkin. 17) Support per-association statistics in SCTP, from Michele Baldessari. And many, many, driver updates, cleanups, and improvements. Too numerous to mention individually. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) net/mlx4_en: Add support for destination MAC in steering rules net/mlx4_en: Use generic etherdevice.h functions. net: ethtool: Add destination MAC address to flow steering API bridge: add support of adding and deleting mdb entries bridge: notify mdb changes via netlink ndisc: Unexport ndisc_{build,send}_skb(). uapi: add missing netconf.h to export list pkt_sched: avoid requeues if possible solos-pci: fix double-free of TX skb in DMA mode bnx2: Fix accidental reversions. bna: Driver Version Updated to 3.1.2.1 bna: Firmware update bna: Add RX State bna: Rx Page Based Allocation bna: TX Intr Coalescing Fix bna: Tx and Rx Optimizations bna: Code Cleanup and Enhancements ath9k: check pdata variable before dereferencing it ath5k: RX timestamp is reported at end of frame ath9k_htc: RX timestamp is reported at end of frame ...
2012-12-11ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets.Schichan Nicolas
The offset must be multiplied by 4 to be sure to access the correct 32bit word in the stack scratch space. For instance, a store at scratch memory cell #1 was generating the following: st r4, [sp, #1] While the correct code for this is: st r4, [sp, #4] To reproduce the bug (assuming your system has a NIC with the mac address 52:54:00:12:34:56): echo 0 > /proc/sys/net/core/bpf_jit_enable tcpdump -ni eth0 "ether[1] + ether[2] - ether[3] * ether[4] - ether[5] \ == -0x3AA" # this will capture packets as expected echo 1 > /proc/sys/net/core/bpf_jit_enable tcpdump -ni eth0 "ether[1] + ether[2] - ether[3] * ether[4] - ether[5] \ == -0x3AA" # this will not. This bug was present since the original inclusion of bpf_jit for ARM (ddecdfce: ARM: 7259/3: net: JIT compiler for packet filters). Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-11ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch.Schichan Nicolas
Official prototype for kzalloc is: void *kzalloc(size_t, gfp_t); The ARM bpf_jit code was having the assumption that it was: void *kzalloc(gfp_t, size); This was resulting the use of some random GFP flags depending on the size requested and some random overflows once the really needed size was more than the value of GFP_KERNEL. This bug was present since the original inclusion of bpf_jit for ARM (ddecdfce: ARM: 7259/3: net: JIT compiler for packet filters). Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-13ARM: net: bpf_jit_32: add VLAN instructions for BPF JITDaniel Borkmann
This patch is a follow-up for patch "net: filter: add vlan tag access" to support the new VLAN_TAG/VLAN_TAG_PRESENT accessors in BPF JIT. Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13ARM: net: bpf_jit_32: add XOR instruction for BPF JITDaniel Borkmann
This patch is a follow-up for patch "filter: add XOR instruction for use with X/K" that implements BPF ARM JIT parts for the BPF XOR operation. Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14ARM: 7421/1: bpf_jit: BPF_S_ANC_ALU_XOR_X supportMircea Gherzan
JIT support for the XOR operation introduced by the commit ffe06c17afbb. Signed-off-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-24ARM: 7259/3: net: JIT compiler for packet filtersMircea Gherzan
Based of Matt Evans's PPC64 implementation. The compiler generates ARM instructions but interworking is supported for Thumb2 kernels. Supports both little and big endian. Unaligned loads are emitted for ARMv6+. Not all the BPF opcodes that deal with ancillary data are supported. The scratch memory of the filter lives on the stack. Hardware integer division is used if it is available. Enabled in the same way as for x86-64 and PPC64: echo 1 > /proc/sys/net/core/bpf_jit_enable A value greater than 1 enables opcode output. Signed-off-by: Mircea Gherzan <mgherzan@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>