summaryrefslogtreecommitdiff
path: root/arch/arm/plat-samsung/adc.c
AgeCommit message (Collapse)Author
2012-07-13ARM: SAMSUNG: fix race in s3c_adc_start for ADCTodd Poynor
Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450Heiko Stuebner
The ADC of the S3C2416/2450 SoC is 10 or 12 bit wide, has its source selection in the register base+0x18 and its width selection in bit 03 of the ADCCON register. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14ARM: SAMSUNG: Add support s3c2443-adc for S3C2443Heiko Stuebner
The S3C2443-adc is 10 bit wide and has its mux-select in an extra register at base+0x18 Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-12ARM: SAMSUNG: Fix mux bit modification in s3c_adc_selectHeiko Stuebner
The mux bits in the adccon register should be cleared only if muxing is really done in ADCCON and not another register. This patch introduces a conditional for this. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: SAMSUNG: Revise PM for 12-bit ADC operationsMyungJoo Ham
- Fixed: 12bit precision is lost at suspend/resume - Updated: use pm_dev_ops Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: SAMSUNG: ADC Channel selectionMyungJoo Ham
In S5PV210/S5PC110/EXYNOS4, ADCMUX channel selection uses ADCMUX register, not ADCCON register. This patch corrects the behavior of SAMSUNG-ADC for such CPUs. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: SAMSUNG: use regulator VDD for ADCMyungJoo Ham
This patch allows the Samsung ADC driver to enable VDD regulator at probe and resume and to disable at exit and suspend. In a platform where ADC's VDD regulator is not "always-on", this control is required although this patch does not provide fine-grained power control (turning on the regulator only when being accessed). However, if VDD regulator ("vdd" for the adc device) is not provided, the regulator control will not be activated because there are platforms that do not provide regulator for ADC device. arch_initcall has been modified to module_init in order to allow regulators to be available at probe. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-08ARM: SAMSUNG: Fix build warnings because of unused codesKukjin Kim
This patch removes following unused codes for removing build warnings. arch/arm/plat-samsung/adc.c:438: warning: unused variable 'flags' arch/arm/mach-s5pv210/clock.c:176: warning: 's5pv210_clk_ip4_ctrl' defined but not used Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-05-20ARM: SAMSUNG: Make ADC client SMP safeBen Dooks
Change local_irq disable calls to use spinlocks to ensure that the ADC driver data is protected against multiple access.. Note, this does not protect the client's data, and the client should ensure it does not make multiple calls to the ADC driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-24ARM: SAMSUNG: adc: disable/enable IRQ on suspend/resumeVasily Khoruzhick
IRQ should be disabled on suspend and re-enabled on resume. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-03ARM: SAMSUNG: Add support for 12bit ADCMaurus Cuelenaere
The S3C64XX SoC series support 12bit ADC data, enable this and mask the data accordingly. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26ARM: SAMSUNG: Fix null pointer dereference in ADC driverMaurus Cuelenaere
ARM: SAMSUNG: Fix null pointer dereference in ADC driver Use struct adc_device instead of relying on client (which could be NULL) when checking for SoC type. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18ARM: S3C64XX: Add S3C64XX support to the generic Samsung ADC driverMaurus Cuelenaere
Add S3C64XX support to the generic Samsung ADC driver Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18ARM: SAMSUNG: Move S3C24XX ADC driver to plat-samsungMaurus Cuelenaere
Move S3C24XX ADC driver to plat-samsung Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>