| Age | Commit message (Collapse) | Author |
|---|
|
The serial port changes make it advisable to enable the proper UART
drivers.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5518/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
We will use 8250_dw instead.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5517/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Following patch to use generic 8250 drivers will need proper clock
information. So when using the internal device tree, populate the
"clock-frequency" property with the correct value.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5515/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add support for the Netgear CVG834G and enable the two UARTs, Ethernet
on the first MAC, PCI and the two leds.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5502/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Some boards may need to reset their external PHY or switch they are
attached to, add a hook for doing this along with providing custom
linux/gpio.h flags for doing this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5501/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The BCM3368 SoC uses a NVRAM format which is not compatible with the one
used by CFE, provide a default MAC address which is suitable for use and
which is the default one also being used by the bootloader on these
chips.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5498/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add the firmware header format which is used by Broadcom Cable Modem
SoCs such as the BCM3368 SoC. We export the bcm_hcs firmware format
structure because it is used by user-land tools to create firmware
images for these SoCs and will later be used by a corresponding MTD
parser.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5496/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort
in the existing code base is required to get it supported. This patch adds
support for the following on-chip peripherals:
- two UARTS
- GPIO
- Ethernet
- SPI
- PCI
- NOR Flash
The most noticeable difference with 3368 is that it has its peripheral
register at 0xfff8_0000 we check that separately in ioremap.h. Since
3368 is identical to 6358 for its clock and reset bits, we use them
verbatim.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5499/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Enabling BOOT_RAW is mandatory to get a binary image (objcopy from ELF
to binary) to work. This does not affect the ELF kernels which are used
by CFE on BCM63XX DSL platforms, but is going to be necessary to support
BCM63XX on Cable Modem chips such as BCM3368.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5500/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This board has been EOL for many years now; lets not burden people doing
build coverage and other tree wide work with working on essentially dead
files.
[ralf@linux-mips.org: Also remove arch/mips/include/asm/mach-wrppmc/war.h.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Patchwork: http://patchwork.linux-mips.org/patch/5503/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit 610019baddcb4c4c323c12cd44ca7f73d7145d6f ("[MIPS] Remove unused
function alloc_pci_controller.") removed the function, but left the
prototype in the header file.
Remove it as well so people don't get tempted to use it and wonder why
it doesn't work.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5473/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
All BCM63XX SoCs starting with BCM6358 have a BMIPS4350 instead of a
BMIPS3300, so select it unless support for any of the older SoCs is
selected.
All BMIPS4350 have only two CPUs, so select the appropriate default.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/5355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MIPS software IRQs 0 and 1 are used for interprocessor signaling (IPI)
on BMIPS SMP. Make the board support code aware of them.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
[jogo@openwrt.org: move sw irqs behind timer irq]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
For non-SMP, uses the new random canary value that is stored in the
task struct whenever a new task is forked. Based on ARM version in
df0698be14c6683606d5df2d83e3ae40f85ed0d9 and subject to the same
limitations: the variable GCC expects, __stack_chk_guard, is global,
so this will not work on SMP.
Quoting Nicolas Pitre <nico@fluxnic.net>: "One way to overcome this
GCC limitation would be to locate the __stack_chk_guard variable into
a memory page of its own for each CPU, and then use TLB locking to
have each CPU see its own page at the same virtual address for each of
them."
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5488/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Implements basic stack protector support based on ARM version in
c743f38013aeff58ef6252601e397b5ba281c633 , with Kconfig option,
constant canary value set at boot time, and script to check if
compiler actually supports stack protector.
Tested by creating a kernel module that writes past end of char[].
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Cc: Carmelo Amoroso <carmelo.amoroso@st.com>
Patchwork: https://patchwork.linux-mips.org/patch/5448/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When building with -fstack-protector, gcc emits the __stack_chk_guard and
__stack_chk_fail symbols to check for stack stability. These symbols are
defined in vmlinux but the generated vmlinux.bin that is used to create
the compressed vmlinuz image has no symbol table so the linker can't find
these symbols during the final linking phase. As a result of which, we
need either to redefine these symbols just for the compressed image or drop
the -fstack-protector option when building the compressed image. This patch
implements the latter of two options.
Fixes the following linking problem:
dbg.c:(.text+0x7c): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0x80): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xd4): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xec): undefined reference to `__stack_chk_fail'
[ralf@linux-mips.org: I'm applying this before the patch that actually adds
stack protector support for MIPS. This means, it will not be possible
to trigger above error message with any commit from the tree but rather
they are what one would hit without this commit.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5575/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Merge in a recent upstream commit:
c2853c8df57f include/linux/math64.h: add div64_ul()
because:
72a4cf20cb71 sched: Change cfs_rq load avg to unsigned long
relies on it.
[ We don't rebase sched/core for this, because the handful of
followup commits after the broken commit are not behavioral
changes so are unlikely to be needed during bisection. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* pm-cpufreq-assorted: (21 commits)
cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: e_powersaver: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: ACPI: call CPUFREQ_POSTCHANGE notfier in error cases
cpufreq: make __cpufreq_notify_transition() static
cpufreq: Fix minor formatting issues
cpufreq: Fix governor start/stop race condition
cpufreq: Simplify userspace governor
cpufreq: powerpc: move cpufreq driver to drivers/cpufreq
cpufreq: kirkwood: Select CPU_FREQ_TABLE option
cpufreq: big.LITTLE needs cpufreq table
cpufreq: SPEAr needs cpufreq table
cpufreq: powerpc: Add cpufreq driver for Freescale e500mc SoCs
cpufreq: remove unnecessary cpufreq_cpu_{get|put}() calls
cpufreq: MAINTAINERS: Add git tree path for ARM specific updates
cpufreq: rename index as driver_data in cpufreq_frequency_table
cpufreq: Don't create empty /sys/devices/system/cpu/cpufreq directory
cpufreq: Move get_cpu_idle_time() to cpufreq.c
cpufreq: governors: Move get_governor_parent_kobj() to cpufreq.c
cpufreq: Add EXPORT_SYMBOL_GPL for have_governor_per_policy
...
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When having enabled MIPS_PGD_C0_CONTEXT, trap_init() might call the
generated tlbmiss_handler_setup_pgd before it was committed to memory,
causing boot failures:
trap_init()
|- per_cpu_trap_init()
| |- TLBMISS_HANDLER_SETUP()
| |- tlbmiss_handler_setup_pgd()
|- flush_tlb_handlers()
To avoid this, move flush_tlb_handlers() into build_tlb_refill_handler()
right after they were generated. We can do this as the cache handling is
initialized just before creating the tlb handlers.
This issue was introduced in 3d8bfdd0307223de678962f1c1907a7cec549136
("MIPS: Use C0_KScratch (if present) to hold PGD pointer.").
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5539/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CC arch/mips/sni/pcit.o
arch/mips/sni/pcit.c:150:30: warning: ‘sni_pcit_controller’ defined but not used [-Wunused-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fixes the following build problem:
arch/mips/sni/pcimt.c:188:30: error: 'sni_controller'
defined but not used [-Werror=unused-variable]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5547/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fixes the following build problem:
mips-linux-gnu-ld:arch/mips/kernel/vmlinux.lds:253: syntax error
because VMLINUX_LOAD_ADDRESS was an empty string for that platform
so the vmlinux.lds.S created an invalid section entry on line 50.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5548/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Use irq_get_trigger_type() to get the IRQ trigger type flags
instead calling irqd_get_trigger_type(irq_desc_get_irq_data(irq))
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/1371228049-27080-7-git-send-email-javier.martinez@collabora.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
As pointed out by Maciej, POOL16C minor opcodes were mostly shifted
by one bit. Correct those opcodes, and also add jraddiusp to the enum.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: david.daney@cavium.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5527/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MIPS R2 documents state that an execution hazard barrier is needed
after a TLBR before reading EntryLo.
Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5526/
|
|
CC arch/mips/kernel/rtlx.o
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘file_write’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:439:23: error: unused variable ‘rt’ [-Werror=unused-variable]
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘rtlx_module_init’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function ‘set_vi_handler’ [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
Caused by 496ad9aa8ef448058e36ca7a787c61f2e63f0f54 [new helper:
file_inode(file)].
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove the bogus selects on USB-related symbols for 6345 and 6338, not
only we do not yet support USB on BCM63XX, but they also cause the
following warnings:
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_DESC which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
make[4]: Leaving directory `/home/florian/dev/linux'
Just get rid of these bogus Kconfig selects because neither 6345 nor
6338 actually have built-in USB host controllers.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: http://patchwork.linux-mips.org/patch/5497/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Writing a value to a WatchLo* register creates an execution hazard, so
if its value is then read before that hazard is cleared then said value
may be invalid. The mips_probe_watch_registers function must therefore
clear the execution hazard between setting the match bits in a WatchLo*
register & reading the register back in order to check which are set.
This fixes intermittent incorrect watchpoint register probing on some
MIPS cores such as interAptiv & proAptiv.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/5474/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
PowerTV does not provide a prom_putchar function needed for early
printk so remove this symbol for this platform.
Fixes the following problem when EARLY_PRINTK is enabled for powertv:
arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar'
arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5477/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
SIBYTE_BUS_WATCHER is only visible if CONFIG_SIBYTE_BCM112X
or CONFIG_SIBYTE_SB1250 is selected according to the
arch/mips/sibyte/Makefile.
This fixes the following build problem:
arch/mips/mm/cerr-sb1.c:254: undefined reference to `check_bus_watcher'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5482/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CC arch/mips/sibyte/bcm1480/bus_watcher.o
CHK kernel/config_data.h
arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’:
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function)
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1
make[2]: *** [arch/mips/sibyte/bcm1480] Error 2
make[1]: *** [arch/mips/sibyte] Error 2
make: *** [arch/mips] Error 2
The register moved around though it's otherwise the same but because of
the changed address it now also has a different name.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5514/
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
|
|
CC arch/mips/mm/cerr-sb1.o
arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’:
arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function)
arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1
This happens because 8deab1144b553548fb2f1b51affdd36dcd652aaa [[MIPS]
Updated Sibyte headers] changed the headers but not all the users.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5511/
|
|
The write() prototype expects a const char * as argument so declare
it as such.
Fixes the following build problem:
arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of
'cfe_write' discards 'const' qualifier from pointer target type [-Werror]
arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of
'cfe_write' makes pointer from integer without a cast [-Werror]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
It's needed for the TASK_INTERRUPTIBLE definition.
Fixes the following build problem:
arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE'
undeclared (first use in this function)
[ralf@linux-mips.org: Ideally sched.h should be included into the actual
user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky
that close to a release.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5479/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fixes the following build problem:
arch/mips/sibyte/sb1250/bus_watcher.c: In function 'sibyte_bw_int':
arch/mips/sibyte/sb1250/bus_watcher.c:179:7: error: unused variable 'bw_buf'
[-Werror=unused-variable]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5481/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
ap136_pci_init expects a u8 pointer as an argument.
Fixes the following build problem on a randconfig:
arch/mips/ath79/mach-ap136.c:151:2: error:
too many arguments to function 'ap136_pci_init'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5476/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
OCTEON II cannot execute code in the default CAC_BASE space, so we
supply a value (0x8000000000000000) that does work.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5457/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove the software reset register and reset value definitions
from the 'include/asm/mips-boards/generic.h' header file. Also
clean up header and whitespace in platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5456/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove usage of 'include/asm/mips-boards/generic.h' header file.
Instead, move the defines for SOFTRES_REG and GORESET local to
the platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5455/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The soft reset register address and reset value to be written are
incorrect for the SEAD-3 platform. This patch fixes them such that
the SEAD-3 can actually perform a soft reset instead of causing an
exception. Also remove usage of 'include/asm/mips-boards/generic.h'
header file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5454/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge
device (CS5536 general purpose timer) for the timer interrupt. It starts
running early and is already enabled during the PCI configuration,
during which there is a small window in pci_read_base() when the register
access is temporarily disabled. If the timer interrupts at this point,
the system will hang. Fix this by adding a fixup that keeps the register
access always enabled.
The hang the patch fixes usually looks like this:
[ 0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100
[ 0.848000] pci 0000:00:0e.0: reg 10: [io 0xb410-0xb417]
[ 0.852000] pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff]
[ 0.856000] pci 0000:00:0e.0: reg 18: [io 0xb380-0xb3bf]
[ 28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1]
[ 28.140000] Modules linked in:
[ 28.140000] irq event stamp: 37965
[ 28.140000] hardirqs last enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c
[ 28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c
[ 28.140000] softirqs last enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258
[ 28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0
[ 28.140000] Cpu 0
[ 28.140000] $ 0 : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001
[ 28.140000] $ 4 : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011
[ 28.140000] $ 8 : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011
[ 28.140000] $12 : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000
[ 28.140000] $16 : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000
[ 28.140000] $20 : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000
[ 28.140000] $24 : 0000000000000d80 00000000fffedbe0
[ 28.140000] $28 : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8
[ 28.140000] Hi : 0000000000d0fc00
[ 28.140000] Lo : 0000000000f82b40
[ 28.140000] epc : ffffffff8023810c __do_softirq+0xe4/0x258
[ 28.140000] Not tainted
[ 28.140000] ra : ffffffff802380f8 __do_softirq+0xd0/0x258
[ 28.140000] Status: 140044e3 KX SX UX KERNEL EXL IE
[ 28.140000] Cause : 10008400
[ 28.140000] PrId : 00006303 (ICT Loongson-2)
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit abe77f90dc (MIPS: Octeon: Add kexec and kdump support) added a
bootmem region for the kernel image itself. The problem is that this
is rounded up to a 0x100000 boundary, which is memory that may not be
owned by the kernel. Depending on the kernel's configuration based
size, this 'extra' memory may contain data passed from the bootloader
to the kernel itself, which if clobbered makes the kernel crash in
various ways.
The fix: Quit rounding the size up, so that we only use memory
assigned to the kernel.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5449/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Then <asm-generic/topology.h> will define cpp macro as default definition
for pcibus_to_node resulting in:
CC arch/mips/pci/pci-ip27.o
arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’
arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token
make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
LD init/built-in.o
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x67c): undefined reference to `bridge_probe'
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x7d8): undefined reference to `bridge_probe'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
LD init/built-in.o
arch/mips/built-in.o: In function `startup_bridge_irq':
ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge'
arch/mips/built-in.o: In function `shutdown_bridge_irq':
ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Some of the TLB bit definitions in <asm/pgtable-bits.h> have become rather
complex and are no longer usable from assembler resulting in an
explosion like this:
AS arch/mips/kernel/head.o
arch/mips/kernel/head.S: Assembler messages:
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(1<<((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)'
make[2]: *** [arch/mips/kernel/head.o] Error 1
Since now MAPPED_KERNEL_SETUP_TLB is in platform-specific code it's safe
to hardcode the TLB bits there.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
