summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)Author
2012-12-16ARM: OMAP: Fix drivers to depend on omap for internal devicesTony Lindgren
These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-07drivers: bus: ocp2scp: add pdata supportKishon Vijay Abraham I
ocp2scp was not having pdata support which makes *musb* fail for non-dt boot in OMAP platform. The pdata will have information about the devices that is connected to ocp2scp. ocp2scp driver will now make use of this information to create the devices that is attached to ocp2scp. This is needed to fix MUSB regression caused by commit c9e4412a (arm: omap: phy: remove unused functions from omap-phy-internal.c) Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated comments for regression info] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-02drivers: bus: omap_l3: fixup merge conflict resolutionOlof Johansson
This fixes a local merge conflict resolution done wrong locally in arm-soc for-next. soc.h was added on a cleanup branch, but the driver was moved and the header no longer needed. Signed-off-by: Olof Johansson <olof@lixom.net> [ .. and I did the same wrong merge, since git automatically does the whole rename detection etc, so applying this patch from Olof - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-02Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-09-20drivers: bus: omap_l3: use resources instead of hardcoded irqsOlof Johansson
This fixes up a merge conflict due to the move of the driver and cleanups of platform data around the same time. Moving to the resource is what we want anyway, so do it in this branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: rewrote with this branch as base, same end result] Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-09-19drivers: bus: Move the OMAP interconnect driver to drivers/bus/Santosh Shilimkar
OMAP interconnect drivers are used for the interconnect error handling. Since they are bus driver, lets move it to newly created drivers/bus. Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-05drivers: bus: omap-ocp2scp: Fix compile errorKishon Vijay Abraham I
Fixes: CC [M] drivers/bus/omap-ocp2scp.o drivers/bus/omap-ocp2scp.c:70:1: error: '__mod_of_device_table' aliased to undefined symbol 'omap_usb2_id_table' Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-22drivers: bus: add a new driver for omap-ocp2scpKishon Vijay Abraham I
Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of creating all the devices that is connected to OCP2SCP. In the case of OMAP4, USB2PHY is connected to ocp2scp. This also includes device tree support for ocp2scp driver and the documentation with device tree binding information is updated. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>