summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)Author
2012-12-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The MIPS bits for 3.8. This also includes a bunch fixes that were sitting in the linux-mips.org git tree for a long time. This pull request contains updates to several OCTEON drivers and the board support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B, updates to the SSB bus support, MIPS kexec code and adds support for kdump. When pulling this, there are two expected merge conflicts in include/linux/bcma/bcma_driver_chipcommon.h which are trivial to resolve, just remove the conflict markers and keep both alternatives." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits) MIPS: PMC-Sierra Yosemite: Remove support. VIDEO: Newport Fix console crashes MIPS: wrppmc: Fix build of PCI code. MIPS: IP22/IP28: Fix build of EISA code. MIPS: RB532: Fix build of prom code. MIPS: PowerTV: Fix build. MIPS: IP27: Correct fucked grammar in ops-bridge.c MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled MIPS: Fix potencial corruption MIPS: Fix for warning from FPU emulation code MIPS: Handle COP3 Unusable exception as COP1X for FP emulation MIPS: Fix poweroff failure when HOTPLUG_CPU configured. MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y MIPS: Remove unused smvp.h MIPS/EDAC: Improve OCTEON EDAC support. MIPS: OCTEON: Add definitions for OCTEON memory contoller registers. MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian. MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree. MIPS: Remove usage of CEVT_R4K_LIB config option. ...
2012-12-13MIPS/EDAC: Improve OCTEON EDAC support.David Daney
Some initialization errors are reported with the existing OCTEON EDAC support patch. Also some parts have more than one memory controller. Fix the errors and add multiple controllers if present. Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-12MIPS: Cavium: Add EDAC support.Ralf Baechle
Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
2012-12-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC fixes from Borislav Petkov: - EDAC core error path fix, from Denis Kirjanov. - Generalization of AMD MCE bank names and some minor error reporting improvements. - EDAC core cleanups and simplifications, from Wei Yongjun. - amd64_edac fixes for sysfs-reported values, from Josh Hunt. - some heavy amd64_edac error reporting path shaving, leading to removing a bunch of code. - amd64_edac error injection method improvements. - EDAC core cleanups and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (24 commits) EDAC, pci_sysfs: Use for_each_pci_dev to simplify the code EDAC: Handle error path in edac_mc_sysfs_init() properly MCE, AMD: Dump error status MCE, AMD: Report decoded error type first MCE, AMD: Dump CPU f/m/s triple with the error MCE, AMD: Remove functional unit references EDAC: Convert to use simple_open() EDAC, Calxeda highbank: Convert to use simple_open() EDAC: Fix mc size reported in sysfs EDAC: Fix csrow size reported in sysfs EDAC: Pass mci parent EDAC: Add memory controller flags amd64_edac: Fix csrows size and pages computation amd64_edac: Use DBAM_DIMM macro amd64_edac: Fix K8 chip select reporting amd64_edac: Reorganize error reporting path amd64_edac: Do not check whether error address is valid amd64_edac: Improve error injection amd64_edac: Cleanup error injection code amd64_edac: Small fixlets and cleanups ...
2012-12-04EDAC, pci_sysfs: Use for_each_pci_dev to simplify the codeWei Yongjun
Use for_each_pci_dev to simplify the code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> [Boris: cleanup comments and drop loop brackets] Signed-off-by: Borislav Petkov <bp@alien8.de>
2012-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds
Pull EDAC fixes from Mauro Carvalho Chehab: "One EDAC core fix, and a few driver fixes (i7300, i9275x, i7core)." * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: i7core_edac: fix panic when accessing sysfs files i7300_edac: Fix error flag testing edac: Fix the dimm filling for csrows-based layouts i82975x_edac: Fix dimm label initialization
2012-11-28EDAC: Handle error path in edac_mc_sysfs_init() properlyDenis Kirjanov
Make sure proper deregistration happens on all error paths in edac_mc_sysfs_init. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> [ Boris: cleanup and concretize commit message ] Signed-off-by: Borislav Petkov <bp@alien8.de>
2012-11-28MCE, AMD: Dump error statusBorislav Petkov
Dump error status after decoding the error which describes the error disposition. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28MCE, AMD: Report decoded error type firstBorislav Petkov
Instead of starting with the error details, report the decoded, readable error type first. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28MCE, AMD: Dump CPU f/m/s triple with the errorBorislav Petkov
It is very useful to have the family/model/stepping with the reported error so dump it. This saves us asking the bug reporter about it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28MCE, AMD: Remove functional unit referencesBorislav Petkov
Having the functional unit names in each bank decode is only misleading as this code supports multiple families and there's no guarantee the mapping between FUs and MCE banks will stay the same. And also, knowing the functional unit name doesn't help much since you end up looking at the respective BKDG anyway. So drop all FU references and use the MC bank numbers instead. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Convert to use simple_open()Wei Yongjun
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC, Calxeda highbank: Convert to use simple_open()Wei Yongjun
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Fix mc size reported in sysfsJosh Hunt
This is the complement to previous commit "EDAC: Fix csrow size reported in sysfs". This fixes the memory controller size reporting on csrow-based memory controllers. The csrow size is already combined for both channels. Without this patch memory size is reported doubled. Signed-off-by: Josh Hunt <johunt@akamai.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Fix csrow size reported in sysfsBorislav Petkov
On csrow-based memory controllers, we combine the csrow size from both channels and there's no need to do that again in csrow_size_show which leads to double the size of a csrow. Fix it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Pass mci parentBorislav Petkov
Initialize the mem_ctl_info descriptor of a csrow properly. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Add memory controller flagsBorislav Petkov
The first flag is ->csbased and will be used in common EDAC code later. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28amd64_edac: Fix csrows size and pages computationBorislav Petkov
Make sure code pays attention to K8 having only one DCT, reformat and cleanup code, correct debug messages, remove unused code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28amd64_edac: Use DBAM_DIMM macroBorislav Petkov
Instead of open-coding it, use the DBAM_DIMM macro in amd64_csrow_nr_pages() which we have already. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28amd64_edac: Fix K8 chip select reportingBorislav Petkov
This basically reverts 603adaf6b3e3 ("amd64_edac: fix K8 chip select reporting") because it was a clumsy workaround for DIMM sizes reporting on K8 which got superceded by a much more correct one with 41d8bfaba70 ("amd64_edac: Improve DRAM address mapping") without removing the prior one. Remove it now finally. Reported-by: Josh Hunt <johunt@akamai.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28amd64_edac: Reorganize error reporting pathBorislav Petkov
Rewrite CE/UE paths so that they use the same code and drop additional code duplication in handle_ue. Add a struct err_info which collects required info for the error reporting. This, in turn, helps slimming all edac_mc_handle_error() calls down to one. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28amd64_edac: Do not check whether error address is validBorislav Petkov
All families report a valid error address when encountering a DRAM ECC error so no need to check it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28amd64_edac: Improve error injectionBorislav Petkov
When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine does this by injecting the error in the next non-cached access. This takes relatively long time on a normal system so that in order for us to expedite it, we disable the caches around the injection. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28amd64_edac: Cleanup error injection codeBorislav Petkov
Invert kstrtoul return value testing and win one indentation level. Also, shorten up macro names so that the lines can fit into 80 cols. No functional change. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28amd64_edac: Small fixlets and cleanupsBorislav Petkov
amd64_get_dram_hole_info: remove local variable 'base'. sys_addr_to_dram_addr: do not clear local variable 'ret'. Also, sanitize constants formatting. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Handle empty msg strings when reporting errorsBorislav Petkov
A reported error could look like this [ 226.178315] EDAC MC0: 1 CE on mc#0csrow#0channel#0 (csrow:0 channel:0 page:0x427c0d offset:0xde0 grain:0 syndrome:0x1c6) with two spaces back-to-back due to the msg argument of edac_mc_handle_error being passed on empty by the specific drivers. Handle that. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Remove useless assignment of error typeBorislav Petkov
The tracepoint decodes the error type later anyway so remove a useless assignment to the temporary p which gets overwritten later anyway. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Boundary-check edac_debug_levelBorislav Petkov
Only levels [0:4] are allowed so enforce that. Also, while at it, massage Kconfig text and add valid debug levels range to the module parameter description. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28EDAC: Respect operational state in edac_pci.cBorislav Petkov
Currently, we unconditionally enable PCI polling and we don't look at the edac_op_state module parameter. Make this dependent on the parameter setting supplied on the command line. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-11-28i7core_edac: fix panic when accessing sysfs filesPrarit Bhargava
The i7core_edac addrmatch_dev and chancounts_dev have sysfs files associated with them. The sysfs files, however, are coded so that the parent device is is the mci device. This is incorrect and the mci struct should be obtained through the addrmatch_dev and chancounts_dev device's private data field which is populated in i7core_create_sysfs_devices(). Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-30EDAC: Change Boris' email addressBorislav Petkov
My @amd.com address will be invalid soon so move to private email address. Signed-off-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1351532410-4887-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-25i7300_edac: Fix error flag testingJean Delvare
* Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so that the callers get the result they expect. * Fix definition of FERR_FAT_FBD_ERR_MASK. * Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on register FERR_NF_FBD. We were lucky they have the same definition. This fixes kernel bug #44131: https://bugzilla.kernel.org/show_bug.cgi?id=44131 Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-25edac: Fix the dimm filling for csrows-based layoutsMauro Carvalho Chehab
The driver is currently filling data in a wrong way, on drivers for csrows-based memory controller, when the first layer is a csrow. This is not easily to notice, as, in general, memories are filed in dual, interleaved, symetric mode, as very few memory controllers support asymetric modes. While digging into a bug for i82795_edac driver, the asymetric mode there is now working, allowing us to fill the machine with 4x1GB ranks at channel 0, and 2x512GB at channel 1: Channel 0 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages) Channel 1 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages) Instead of properly showing the memories as such, before this patch, it shows the memory layout as: +-----------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | ----------+-----------------------------------+ channel1: | 1024 MB | 1024 MB | 512 MB | channel0: | 1024 MB | 1024 MB | 512 MB | ----------+-----------------------------------+ as if both channels were symetric, grouping the DIMMs on a wrong layout. After this patch, the memory is correctly represented. So, for csrows at layers[0], it shows: +-----------------------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | csrow3 | ----------+-----------------------------------------------+ channel1: | 512 MB | 512 MB | 0 MB | 0 MB | channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | ----------+-----------------------------------------------+ For csrows at layers[1], it shows: +-----------------------+ | mc0 | | channel0 | channel1 | --------+-----------------------+ csrow3: | 1024 MB | 0 MB | csrow2: | 1024 MB | 0 MB | --------+-----------------------+ csrow1: | 1024 MB | 512 MB | csrow0: | 1024 MB | 512 MB | --------+-----------------------+ So, no matter of what comes first, the information between channel and csrow will be properly represented. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-25i82975x_edac: Fix dimm label initializationMauro Carvalho Chehab
The driver has only 4 hardcoded labels, but allows much more memory. Fix it by removing the hardcoded logic, using snprintf() instead. [ 19.833972] general protection fault: 0000 [#1] SMP [ 19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core [ 19.837733] CPU 0 [ 19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc. Precision WorkStation 390 /0MY510 [ 19.837733] RIP: 0010:[<ffffffff813463a8>] [<ffffffff813463a8>] strncpy+0x18/0x30 [ 19.837733] RSP: 0018:ffff880078535b68 EFLAGS: 00010202 [ 19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708 [ 19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708 [ 19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe [ 19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 [ 19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80 [ 19.837733] FS: 00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000 [ 19.837733] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0 [ 19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450) [ 19.837733] Stack: [ 19.837733] ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88 [ 19.837733] ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000 [ 19.837733] 0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d [ 19.837733] Call Trace: [ 19.837733] [<ffffffffa017c6b8>] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac] ... Fix bug reported at: https://bugzilla.redhat.com/show_bug.cgi?id=848149 And, very likely: https://bbs.archlinux.org/viewtopic.php?id=148033 https://bugzilla.kernel.org/show_bug.cgi?id=47171 Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-24amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]Andrew Morton
If none of the elements in scrubrates[] matches, this loop will cause __amd64_set_scrub_rate() to incorrectly use the n+1th element. As the function is designed to use the final scrubrates[] element in the case of no match, we can fix this bug by simply terminating the array search at the n-1th element. Boris: this code is fragile anyway, see here why: http://marc.info/?l=linux-kernel&m=135102834131236&w=2 It will be rewritten more robustly soonish. Reported-by: Denis Kirjanov <kirjanov@gmail.com> Cc: stable@vger.kernel.org Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2012-10-05Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-09-25sb_edac: Avoid overflow errors at memory size calculationMauro Carvalho Chehab
Sandy bridge EDAC is calculating the memory size with overflow. Basically, the size field and the integer calculation is using 32 bits. More bits are needed, when the DIMM memories have high density. The net result is that memories are improperly reported there, when high-density DIMMs are used: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 As the number of pages value is handled at the EDAC core as unsigned ints, the driver shows the 16 GB memories at sysfs interface as 16760832 MB! The fix is simple: calculate the number of pages as unsigned 64-bits integer. After the patch, the memory size (16 GB) is properly detected: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25i5000: Fix the memory size calculation with 2R memoriesMauro Carvalho Chehab
When 2R memories are found, the memory size should be multiplied by two, otherwise, it will report half of the memory size: +-----------------------------------------------+ | mc0 | | branch0 | branch1 | | channel0 | channel1 | channel0 | channel1 | -------+-----------------------------------------------+ slot3: | 0 MB | 0 MB | 0 MB | 0 MB | slot2: | 0 MB | 0 MB | 0 MB | 0 MB | -------+-----------------------------------------------+ slot1: | 0 MB | 0 MB | 0 MB | 0 MB | slot0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | -------+-----------------------------------------------+ (the above machine have 4 x 2GB 2R memories) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25i3200_edac: Fix memory rank sizeMauro Carvalho Chehab
commit a895bf8b1e1ea4c032a8fa8a09475a2ce09fe77a incorrectly changed the logic that fills the memory bank size. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.Shaun Ruffell
Fix potential NULL pointer dereference in edac_unregister_sysfs() on system boot introduced in 3.6-rc1. Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct device") edac_mc_alloc() no longer initializes embedded kobjects in struct mem_ctl_info. Therefore edac_mc_free() can no longer simply decrement a kobject reference count to free the allocated memory unless the memory controller driver module had also called edac_mc_add_mc(). Now edac_mc_free() will check if the newly embedded struct device has been registered with sysfs before using either the standard device release functions or freeing the data structures itself with logic pulled out of the error path of edac_mc_alloc(). The BUG this patch resolves for me: BUG: unable to handle kernel NULL pointer dereference at (null) EIP is at __wake_up_common+0x1a/0x6a Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000) Call Trace: complete_all+0x3f/0x50 device_pm_remove+0x23/0xa2 device_del+0x34/0x142 edac_unregister_sysfs+0x3b/0x5c [edac_core] edac_mc_free+0x29/0x2f [edac_core] e7xxx_probe1+0x268/0x311 [e7xxx_edac] e7xxx_init_one+0x56/0x61 [e7xxx_edac] local_pci_probe+0x13/0x15 ... Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-23edac_mc: fix messy kfree calls in the error pathFengguang Wu
coccinelle warns about: + drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429 421 if (mci->csrows) { > 422 for (chn = 0; chn < tot_channels; chn++) { 423 csr = mci->csrows[chn]; 424 if (csr) { > 425 for (chn = 0; chn < tot_channels; chn++) 426 kfree(csr->channels[chn]); 427 kfree(csr); 428 } > 429 kfree(mci->csrows[i]); 430 } 431 kfree(mci->csrows); 432 } and that code block seem to mess things up in several ways (double free, memory leak, out-of-bound reads etc.): L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be "row" and "tot_csrows" respectively. Which means either memory leak, or out-of-bound reads (which if does not trigger an immediate page fault error, will further lead to kfree() on random addresses). L425: The inner loop is reusing the same iterator "chn" as the outer loop, which could lead to premature end of the outer loop, and hence memory leak. L429: The array index 'i' in mci->csrows[i] is a temporary value used in previous loops, and won't change at all in the current loop. Which means either out-of-bound read and possibly kfree(random number), or the same mci->csrows[i] get freed once and again, and possibly double free for the kfree(csr) in L427. L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory. The buggy code was introduced by commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1 merge window. Fix it by freeing up resources in this order: free csrows[i]->channels[j] free csrows[i]->channels free csrows[i] free csrows CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Shaun Ruffell <sruffell@digium.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-12powerpc/fsl-pci: Unify pci/pcie initialization codeJia Hongtao
We unified the Freescale pci/pcie initialization by changing the fsl_pci to a platform driver. In previous PCI code architecture the initialization routine is called at board_setup_arch stage. Now the initialization is done in probe function which is architectural better. Also It's convenient for adding PM support for PCI controller in later patch. Now we registered pci controllers as platform devices. So we combine two initialization code as one platform driver. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-13workqueue: use mod_delayed_work() instead of cancel + queueTejun Heo
Convert delayed_work users doing cancel_delayed_work() followed by queue_delayed_work() to mod_delayed_work(). Most conversions are straight-forward. Ones worth mentioning are, * drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always use mod_delayed_work() and cancel loop in edac_mc_reset_delay_period() is dropped. * drivers/platform/x86/thinkpad_acpi.c: No need to remember whether watchdog is active or not. @fan_watchdog_active and related code dropped. * drivers/power/charger-manager.c: Seemingly a lot of delayed_work_pending() abuse going on here. [delayed_]work_pending() are unsynchronized and racy when used like this. I converted one instance in fullbatt_handler(). Please conver the rest so that it invokes workqueue APIs for the intended target state rather than trying to game work item pending state transitions. e.g. if timer should be modified - call mod_delayed_work(), canceled - call cancel_delayed_work[_sync](). * drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling() simplified. Note that round_jiffies() calls in this function are meaningless. round_jiffies() work on absolute jiffies not delta delay used by delayed_work. v2: Tomi pointed out that __cancel_delayed_work() users can't be safely converted to mod_delayed_work(). They could be calling it from irq context and if that happens while delayed_work_timer_fn() is running, it could deadlock. __cancel_delayed_work() users are dropped. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Doug Thompson <dougthompson@xmission.com> Cc: David Airlie <airlied@linux.ie> Cc: Roland Dreier <roland@kernel.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Johannes Berg <johannes@sipsolutions.net>
2012-07-30Merge branch 'devel'Mauro Carvalho Chehab
* devel: (33 commits) edac i5000, i5400: fix pointer math in i5000_get_mc_regs() edac: allow specifying the error count with fake_inject edac: add support for Calxeda highbank L2 cache ecc edac: add support for Calxeda highbank memory controller edac: create top-level debugfs directory sb_edac: properly handle error count i7core_edac: properly handle error count edac: edac_mc_handle_error(): add an error_count parameter edac: remove arch-specific parameter for the error handler amd64_edac: Don't pass driver name as an error parameter edac_mc: check for allocation failure in edac_mc_alloc() edac: Increase version to 3.0.0 edac_mc: Cleanup per-dimm_info debug messages edac: Convert debugfX to edac_dbg(X, edac: Use more normal debugging macro style edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs Edac: Add ABI Documentation for the new device nodes edac: move documentation ABI to ABI/testing/sysfs-devices-edac i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy edac: change the mem allocation scheme to make Documentation/kobject.txt happy ...
2012-06-27edac i5000, i5400: fix pointer math in i5000_get_mc_regs()Dan Carpenter
"pvt->ambase" is a u64 datatype. The intent here is to fill the first half in the first call to pci_read_config_dword() and the other half in the second. Unfortunately the pointer math is wrong so we set the wrong data. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-27edac: allow specifying the error count with fake_injectMauro Carvalho Chehab
In order to test if the error counters are properly incremented, add a way to specify how many errors were generated by a trace. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-27edac: add support for Calxeda highbank L2 cache eccRob Herring
Add support for L2 ECC on Calxeda highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-27edac: add support for Calxeda highbank memory controllerRob Herring
Add support for memory controller on Calxeda Highbank platforms. Highbank platforms support a single 4GB mini-DIMM with 1-bit correction and 2-bit detection. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-12edac: create top-level debugfs directoryRob Herring
Create a single, top-level "edac" directory for debugfs. An "mc[0-N]" directory is then created for each memory controller. Individual drivers can create additional entries such as h/w error injection control. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>