summaryrefslogtreecommitdiff
path: root/drivers/firewire/core-device.c
AgeCommit message (Collapse)Author
2013-06-09firewire: remove support of fw_driver.driver.probe and .remove methodsStefan Richter
After all IEEE 1394 high-level drivers being converted to bus-specific .probe/.remove methods, remove support of the obsolete generic methods. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-06-09firewire: introduce fw_driver.probe and .remove methodsStefan Richter
FireWire upper layer drivers are converted from generic struct driver.probe() and .remove() to bus-specific struct fw_driver.probe() and .remove(). The new .probe() adds a const struct ieee1394_device_id *id argument, indicating the entry in the driver's device identifiers table which matched the fw_unit to be probed. This new argument is used by the snd-firewire-speakers driver to look up device-specific parameters and methods. There is at least one other FireWire audio driver currently in development in which this will be useful too. The new .remove() drops the unused error return code. Although all in-tree drivers are being converted to the new methods, support for the old methods is left in place in this commit. This allows public developer trees to merge this commit and then move to the new fw_driver methods. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de> (for sound/firewire/) Cc: Peter Hurley <peter@hurleysoftware.com> (for drivers/staging/fwserial/)
2013-04-28firewire: remove unnecessary alloc/OOM messagesStefan Richter
These are redundant to log messages from the mm core. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2013-02-28firewire: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. v2: Stefan pointed out that add_client_resource() may be called from non-process context. Preload iff @gfp_mask contains __GFP_WAIT. Also updated to include minor upper limit check. [tim.gardner@canonical.com: fix accidentally orphaned 'minor'[ Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28firewire: add minor number range check to fw_device_init()Tejun Heo
fw_device_init() didn't check whether the allocated minor number isn't too large. Fail if it goes overflows MINORBITS. Signed-off-by: Tejun Heo <tj@kernel.org> Suggested-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-25firewire: core: feed /dev/random with devices' GUIDsClemens Ladisch
Send the GUIDs of newly registered controllers and devices to the /dev/random driver to help seed its pools. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-06-30firewire: core: add is_local sysfs device attributeClemens Ladisch
Making this information available in sysfs allows to differentiate between controllers in the local and remote Linux PCs, and thus is useful for servers that are started with udev rules. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: core: fw_device_refresh(): clean up error handlingClemens Ladisch
In fw_device_init() and fw_device_refresh(), if a call to read_cofig_rom() fails, the operation is retried a few times, with these retries being controlled by the MAX_RETRIES and RETRY_DELAY symbols. fw_device_refresh() also reads part of the config rom by calling reread_config_rom(). Any errors from this call resulted in retries with MAX_RETRIES/2 and RETRY_DELAY/2. There is no reason to require that a device that has initiated a bus reset must react faster to read requests than a device that has just been plugged in. Furthermore, if the config rom has changed, any errors from the following read_config_rom() call are then handled with the normal retry count and delay. Remove this inconsistency by always using the normal retry count and delay. (This also makes the two error handlers identical and allows merging them.) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: core: log config rom reading errorsClemens Ladisch
If reading or refreshing a config rom fails, also log the actual error that caused it to fail. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: core: improve reread_config_rom() interfaceClemens Ladisch
The return value of reread_config_rom() was a mixture of two pieces of information: whether the function succeeded, and whether the config rom had changed. To clarify the semantics, and to allow returning the actual error code, split the second information into a new output parameter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: core: wait for inaccessible devices after bus resetClemens Ladisch
When reread_config_rom() encountered a config rom that was marked as not yet accessible, that device would be treated as "gone". This would mean that that device would effectively vanish until the next bus reset. The correct way to handle this situation is the same as in read_config_rom(), to treat this like other errors and to retry the read later, when the (possibly changed) config rom is available. The device is marked "gone" only if it continues to return zero values after these retries. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-02-22firewire: core: prefix log messages with card nameStefan Richter
Associate all log messages from firewire-core with the respective card because some people have more than one card. E.g. firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core: created device fw0: GUID 0814438400000389, S800 firewire_core: phy config: new root=ffc1, gap_count=5 firewire_core: created device fw1: GUID 0814438400000388, S800 firewire_core: created device fw2: GUID 0001d202e06800d1, S800 turns into firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800 firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5 firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800 firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800 This increases the module size slightly; to keep this in check, turn the former printk wrapper macros into functions. Their implementation is largely copied from driver core's dev_printk counterparts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-15firewire: move fw_device reference counting from drivers to coreStefan Richter
fw_unit device drivers invariably need to talk to the fw_unit's parent (an fw_device) and grandparent (an fw_card). firewire-core already maintains an fw_card reference for the entire lifetime of an fw_device. Likewise, let firewire-core maintain an fw_device reference for the entire lifetime of an fw_unit so that fw_unit drivers don't have to. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-22Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
2011-08-13firewire: core: handle ack_busy when fetching the Config ROMStefan Richter
Some older Panasonic made camcorders (Panasonic AG-EZ30 and NV-DX110, Grundig Scenos DLC 2000) reject requests with ack_busy_X if a request is sent immediately after they sent a response to a prior transaction. This causes firewire-core to fail probing of the camcorder with "giving up on config rom for node id ...". Consequently, programs like kino or dvgrab are unaware of the presence of a camcorder. Such transaction failures happen also with the ieee1394 driver stack (of the 2.4...2.6 kernel series until 2.6.36 inclusive) but with a lower likelihood, such that kino or dvgrab are generally able to use these camcorders via the older driver stack. The cause for firewire-ohci's or firewire-core's worse behavior is not yet known. Gap count optimization in firewire-core is not the cause. Perhaps the slightly higher latency of transaction completion in the older stack plays a role. (ieee1394: AR-resp DMA context tasklet -> packet completion ktread -> user process; firewire-core: tasklet -> user process.) This change introduces retries and delays after ack_busy_X into firewire-core's Config ROM reader, such that at least firewire-core's probing and /dev/fw* creation are successful. This still leaves the problem that userland processes are facing transaction failures. gscanbus's built-in retry routines deal with them successfully, but neither kino's nor dvgrab's do ever succeed. But at least DV capture with "dvgrab -noavc -card 0" works now. Live video preview in kino works too, but not actual capture. One way to prevent Configuration ROM reading failures in application programs is to modify libraw1394 to synthesize read responses by means of firewire-core's Configuration ROM cache. This would only leave CMP and FCP transaction failures as a potential problem source for applications. Reported-and-tested-by: Thomas Seilund <tps@netmaster.dk> Reported-and-tested-by: René Fritz <rene@colorcube.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-10firewire: sbp2: parallelize login, reconnect, logoutStefan Richter
The struct sbp2_logical_unit.work items can all be executed in parallel but are not reentrant. Furthermore, reconnect or re-login work must be executed in a WQ_MEM_RECLAIM workqueue. Hence replace the old single-threaded firewire-sbp2 workqueue by a concurrency-managed but non-reentrant workqueue with rescuer. firewire-core already maintains one, hence use this one. In earlier versions of this change, I observed occasional failures of parallel INQUIRY to an Initio INIC-2430 FireWire 800 to dual IDE bridge. More testing indicates that parallel INQUIRY is not actually a problem, but too quick successions of logout and login + INQUIRY, e.g. a quick sequence of cable plugout and plugin, can result in failed INQUIRY. This does not seem to be something that should or could be addressed by serialization. Another dual-LU device to which I currently have access to, an OXUF924DSB FireWire 800 to dual SATA bridge with firmware from MacPower, has been successfully tested with this too. This change is beneficial to environments with two or more FireWire storage devices, especially if they are located on the same bus. Management tasks that should be performed as soon and as quickly as possible, especially reconnect, are no longer held up by tasks on other devices that may take a long time, especially login with INQUIRY and sd or sr driver probe. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10firewire: core: use non-reentrant workqueue with rescuerStefan Richter
firewire-core manages the following types of work items: fw_card.br_work: - resets the bus on a card and possibly sends a PHY packet before that - does not sleep for long or not at all - is scheduled via fw_schedule_bus_reset() by - firewire-ohci's pci_probe method - firewire-ohci's set_config_rom method, called by kernelspace protocol drivers and userspace drivers which add/remove Configuration ROM descriptors - userspace drivers which use the bus reset ioctl - itself if the last reset happened less than 2 seconds ago fw_card.bm_work: - performs bus management duties - usually does not (but may in corner cases) sleep for long - is scheduled via fw_schedule_bm_work() by - firewire-ohci's self-ID-complete IRQ handler tasklet - firewire-core's fw_device.work instances whenever the root node device was (successfully or unsuccessfully) discovered, refreshed, or rediscovered - itself in case of resource allocation failures or in order to obey the 125ms bus manager arbitration interval fw_device.work: - performs node probe, update, shutdown, revival, removal; including kernel driver probe, update, shutdown and bus reset notification to userspace drivers - usually sleeps moderately long, in corner cases very long - is scheduled by - firewire-ohci's self-ID-complete IRQ handler tasklet via the core's fw_node_event - firewire-ohci's pci_remove method via core's fw_destroy_nodes/ fw_node_event - itself during retries, e.g. while a node is powering up iso_resource.work: - accesses registers at the Isochronous Resource Manager node - usually does not (but may in corner cases) sleep for long - is scheduled via schedule_iso_resource() by - the owning userspace driver at addition and removal of the resource - firewire-core's fw_device.work instances after bus reset - itself in case of resource allocation if necessary to obey the 1000ms reallocation period after bus reset fw_card.br_work instances should not, and instances of the others must not, be executed in parallel by multiple CPUs -- but were not protected against that. Hence allocate a non-reentrant workqueue for them. fw_device.work may be used in the memory reclaim path in case of SBP-2 device updates. Hence we need a workqueue with rescuer and cannot use system_nrt_wq. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Reviewed-by: Tejun Heo <tj@kernel.org>
2011-03-20firewire: core: ignore link-active bit of new nodes, fix device recognitionStefan Richter
Like the older ieee1394 core driver, firewire-core skipped scanning of any new node whose PHY sent a self ID without "link active" bit. If a device had this bit off mistakenly, it meant that it was inaccessible to kernel drivers with the old IEEE 1394 driver stack but could still be accessed by userspace drivers through the raw1394 interface. But with firewire-core, userspace drivers don't get to see such buggy devices anymore. This is effectively a driver regression since this device bug is otherwise harmless. We now attempt to scan all devices, even repeaters that don't have a link or powered-down devices that have everything but their PHY shut down when plugged in. This results in futile repeated scanning attempts in case of such devices that really don't have an active link, but this doesn't hurt since recent workqueue infrastructure lets us run more concurrent scanning jobs than we can shake a stick at. This should fix accessibility of Focusrite Saffire PRO 26 I/O: http://sourceforge.net/mailarchive/forum.php?thread_name=20110314215622.5c751bb0%40stein&forum_name=ffado-user Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-01-23firewire: core: fix card->reset_jiffies overflowClemens Ladisch
On a 32-bit machine with, e.g., HZ=1000, jiffies will overflow after about 50 days, so if there are between 25 and 50 days between bus resets, the card->reset_jiffies comparisons can get wrong results. To fix this, ensure that this timestamp always uses 64 bits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de>
2010-08-02Merge firewire branches to be released post v2.6.35Stefan Richter
Conflicts: drivers/firewire/core-card.c drivers/firewire/core-cdev.c and forgotten #include <linux/time.h> in drivers/firewire/ohci.c Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-13firewire: cdev: fix fw_cdev_event_bus_reset emission after local config ROM ↵Stefan Richter
changes When a descriptor was added or removed to the local node's config ROM, userspace clients which had a local node's /dev/fw* open did not receive any fw_cdev_event_bus_reset for poll()/read() consumption. The cause was that the core-device.c facility which re-reads the config ROM of the bus reset initiator node missed to call the fw_device update function. The fw_units are destroyed and newly added, but their parent stays and needs to be updated. Reported-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-13firewire: core: fix fw_send_request kerneldoc commentStefan Richter
The present inline documentation of the fw_send_request() in-kernel API refers to userland code that is not applicable to kernel drivers at all. Reported-by: Ben Gamari <bgamari.foss@gmail.com> While we are at fixing the whole documentation of fw_send_request(), also improve the rest of firewire-core's kerneldoc comments: - Add a bit of text concerning fw_run_transaction()'s call parameters. - Append () to function names and tab-align parameter descriptions as suggested by the example in Documentation/kernel-doc-nano-HOWTO.txt. - Remove kerneldoc markers from comments on static functions. - Remove outdated parameter descriptions at build_tree(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: align driver match with modalias firewire: core: fix Model_ID in modalias firewire: ohci: add cycle timer quirk for the TI TSB12LV22 firewire: core: fw_iso_resource_manage: fix error handling
2010-03-24firewire: core: align driver match with modaliasStefan Richter
The driver match strategy was: - Match vendor/model/specifier/version of the unit directory. - If that was a miss, match vendor from the root directory and model/specifier/version of the unit directory. This was inconsistent with how the modalias string was constructed until recently (take vendor/model from root directory and specifier/ version from unit directory). It was also inconsistent with how it is done since the parent commit: - Use vendor/model/specifier/version of the unit directory if possible, - fall back to one or more of vendor/model/specifier/version from the root directory depending on which ones are not present at the unit directory. Fix this inconsistency by sharing the ROM scanner function between modalias printer function and driver match function. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-24firewire: core: fix Model_ID in modaliasStefan Richter
The modalias string of devices that represent units on a FireWire node did not show Module_ID entries within unit directories. This was because firewire-core searched only the root directory of the configuration ROM for a Model_ID entry. We now search first the root directory, then the unit directory. IOW honor a unit directory's Model_ID if present, otherwise fall back to the root directory's model ID (if present). Furthermore, apply the same change to Vendor_ID. This had the same issue but it was less apparent because most devices provide Vendor_ID only in the root directory. And finally, also use this strategy for the remaining two IDs in the modalias, Specifier_ID and Version. It does not actually make sense to look for them elsewhere than in the unit directory because they are mandatory there. However, a uniform search order simplifies the implementation and has no adverse affect in practice. Side notes: - The older counterpart of this, nodemgr.c of ieee1394, looked for Vendor_ID first in the root directory, then in the unit directory, and for Model_ID only in the unit directory. - There is a single mainline driver which requires Vendor_ID and Model_ID --- the firedtv driver. This one worked because FireDTVs provide Vendor_ID in the root directory and Model_ID identically in root directory and unit directory. - Apart from firedtv, there are currently no drivers known to me (including userspace drivers) that look at the Vendor_ID or Model_ID of the modalias. Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-03-08Driver core: create lock/unlock functions for struct deviceGreg Kroah-Hartman
In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-24firewire: core: rename an internal functionStefan Richter
according to what it really does. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: fix an information leakStefan Richter
If a device exposes a sparsely populated configuration ROM, firewire-core's sysfs interface and character device file interface showed random data in the gaps between config ROM blocks. Fix this by zero-initialization of the config ROM reader's scratch buffer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: increase stack size of config ROM readerStefan Richter
The stack size of 16 was artificially chosen and may be too small in extreme cases. A device won't be accessible then. Since it doesn't really matter to the slab allocator whether we ask for 1088 bytes or 2048 bytes of scratch memory, just allocate 2048 bytes for the sum of temporary config ROM image and stack, and we will never ever overflow the stack (because there simply can't be more stack items than ROM entries). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: don't fail device creation in case of too large config ROM ↵Stefan Richter
blocks It never happened yet, but better safe than sorry: If a device's config ROM contains a block which overlaps the boundary at 0xfffff00007ff, just ignore that one block instead of refusing to add the device representation. That way, upper layers (kernelspace or userspace drivers) might still be able to use the device to some degree. That's better than total inaccessibility of the device. Worse, the core would have logged only a generic "giving up on config rom" message which could only be debugged by feeding a firewire-ohci debug logging session through a config ROM interpreter, IOW would likely remain undiagnosed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-24firewire: core: fix "giving up on config rom" with Panasonic AG-DV2500Stefan Richter
The Panasonic AG-DV2500 tape deck contains an invalid entry in its configuration ROM root directory: A leaf pointer with the undefined key ID 0 and an offset that points way out of the standard config ROM area. This caused firewire-core to dismiss the device with the generic log message "giving up on config rom for node id...", after which it was of course impossible to access the tape deck with dvgrab or any other program. https://bugzilla.redhat.com/show_bug.cgi?id=449252#c29 The fix is to simply ignore this invalid ROM entry and proceed to read the valid rest of the ROM. There is a catch though: When the kernel later iterates over the ROM, it would be nasty having to check again for such too large ROM offsets. Therefore we manipulate the defective or unsupported ROM entry to become a harmless immediate entry that won't have any side effects later (an entry with the value 0x00000000). Reported-by: George Chriss Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: qualify config ROM cache pointers as const pointersStefan Richter
Several config ROM related functions only peek at the ROM cache; mark their arguments as const pointers. Ditto fw_device.config_rom and fw_unit.directory, as the memory behind them is meant to be write-once. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: core: fw_csr_string addendumStefan Richter
Witespace and comment changes, and a different way to say i + 1 < end. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: add fw_csr_string() helper functionClemens Ladisch
The core (sysfs attributes), the firedtv driver, and possible future drivers all read strings from some configuration ROM directory. Factor out the generic code from show_text_leaf() into a new helper function, modified slightly to handle arbitrary buffer sizes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-15driver model: constify attribute groupsDavid Brownell
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-14firewire: core: don't update Broadcast_Channel if RFC 2734 conditions aren't metStefan Richter
This extra check will avoid Broadcast_Channel register related traffic to many IIDC, SBP-2, and AV/C devices which aren't IRMC or have a max_rec < 8 (i.e. support < 512 bytes async payload). This avoids a little bit of traffic after bus reset and is even more careful with devices which don't implement this CSR. The assumption is that no other protocol than IP over 1394 uses the broadcast channel for streams. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-06firewire: core: prepare for non-core children of card devicesStefan Richter
The IP-over-1394 driver will add child devices beneath card devices which are not of type fw_device. Hence firewire-core's callbacks in device_for_each_child() and device_find_child() need to check for the device type now. Initial version written by Jay Fenlason. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-06firewire: add parent-of-unit accessorStefan Richter
Retrieval of an fw_unit's parent is a common pattern in high-level code. Wrap it up as device = fw_parent_device(unit). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05firewire: rename source filesStefan Richter
The source files of firewire-core, firewire-ohci, firewire-sbp2, i.e. "drivers/firewire/fw-*.c" are renamed to "drivers/firewire/core-*.c", "drivers/firewire/ohci.c", "drivers/firewire/sbp2.c". The old fw- prefix was redundant to the directory name. The new core- prefix distinguishes the files according to which driver they belong to. This change comes a little late, but still before further firewire drivers are added as anticipated RSN. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>