summaryrefslogtreecommitdiff
path: root/drivers/firewire
AgeCommit message (Collapse)Author
2012-12-03firewire: net: remove unused variable in fwnet_receive_broadcast()Wei Yongjun
The variable card is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-12-02firewire: net: Fix handling of fragmented multicast/broadcast packets.Stephan Gatzka
This patch fixes both the transmit and receive portion of sending fragmented mutlicast and broadcast packets. The transmit section was broken because the offset for INTFRAG and LASTFRAG packets were just miscalculated by IEEE1394_GASP_HDR_SIZE (which was reserved with skb_push() in fwnet_send_packet). The receive section was broken because in fwnet_incoming_packet is a call to fwnet_peer_find_by_node_id(). Called with generation == -1 it will not find a peer and the partial datagrams are associated to a peer. [Stefan R: The fix to use context->card->generation is not perfect. It relies on the IR tasklet which processes packets from the prior bus generation to run before the self-ID-complete worklet which sets the current card generation. Alas, there is no simple way of a race-free implementation. Let's do it this way for now.] Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-12-02firewire: sbp2: allow WRITE SAME and REPORT SUPPORTED OPERATION CODESStefan Richter
The commits 3c6bdaeab4fd "[SCSI] Add a report opcode helper" 5db44863b6eb "[SCSI] sd: Implement support for WRITE SAME" introduced in-kernel uses of the mentioned commands but cautiously blacklisted them for any IEEE 1394 (SBP-2/3) targets and some other transports. I looked through a range of SBP devices and found that the blacklist flags can be removed: The kernel never attempts these commands if the device's INQUIRY data claim a SCSI revision of less than 0x05. This is the case with all SBP devices that I checked, except for three more recent devices which claimed a revision of 0x05 i.e. conformance with SPC-3 (two devices based on the OXUF936QSE chip but having different firmwares, one based on OXUF934DSB.) I tried "sg_opcodes" from sg3_utils on several older and newer devices and did not encounter any apparent firmware bugs with it. All devices returned Illegal Request/ Invalid command operation code and carried on. I furthermore tried "sg_write_same -U" on the OXUF934DSB device with the same result. Alas I did not have a TRIM enabled SSD available for these tests. All of the bridges were correctly identified by the kernel as "fully provisioned", CD-ROM devices aside. The kernel won't issue WRITE SAME to fully provisioned devices, nor would it attempt REPORT SUPPORTED OPERATION CODES or WRITE SAME with UNMAP bit on devices which do not claim conformance to SPC-3 or later. Hence let's remove the no_report_opcodes and no_write_same blacklist flags so that these commands can be used on newer targets with respective capabilities. I guess the Linux sbp-target could be such a target. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-11-28firewire: remove use of __devinitdataBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28firewire: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-19various: Fix spelling of "asynchronous" in comments.Adam Buchbinder
"Asynchronous" is misspelled in some comments. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-14[SCSI] sd: Implement support for WRITE SAMEMartin K. Petersen
Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-14[SCSI] Add a report opcode helperMartin K. Petersen
The REPORT SUPPORTED OPERATION CODES command can be used to query whether a given opcode is supported by a device. Add a helper function that allows us to look up commands. We only issue RSOC if the device reports compliance with SPC-3 or later. But to err on the side of caution we disable the command for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)Stefan Richter
Fix two bugs of the /dev/fw* character device concerning the FW_CDEV_IOC_GET_INFO ioctl with nonzero fw_cdev_get_info.bus_reset. (Practically all /dev/fw* clients issue this ioctl right after opening the device.) Both bugs are caused by sizeof(struct fw_cdev_event_bus_reset) being 36 without natural alignment and 40 with natural alignment. 1) Memory corruption, affecting i386 userland on amd64 kernel: Userland reserves a 36 bytes large buffer, kernel writes 40 bytes. This has been first found and reported against libraw1394 if compiled with gcc 4.7 which happens to order libraw1394's stack such that the bug became visible as data corruption. 2) Information leak, affecting all kernel architectures except i386: 4 bytes of random kernel stack data were leaked to userspace. Hence limit the respective copy_to_user() to the 32-bit aligned size of struct fw_cdev_event_bus_reset. Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: stable@kernel.org
2012-09-28firewire: addendum to address handler RCU conversionStefan Richter
Follow up on commit c285f6ff6787 "firewire: remove global lock around address handlers, convert to RCU": - address_handler_lock no longer serializes the address handler, only its function to serialize updates to the list of handlers remains. Rename the lock to address_handler_list_lock. - Callers of fw_core_remove_address_handler() must be able to sleep. Comment on this in the API documentation. - The counterpart fw_core_add_address_handler() is by nature something which is used in process context. Replace spin_lock_bh() by spin_lock() in fw_core_add_address_handler() and in fw_core_remove_address_handler(), and document that process context is now required for fw_core_add_address_handler(). - Extend the documentation of fw_address_callback_t. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-09-28firewire: remove global lock around address handlers, convert to RCUPeter Hurley
Upper-layer handlers for inbound requests were called with a spinlock held by firewire-core. Calling into upper layers with a lower layer lock held is generally a bad idea. What's more, since commit ea102d0ec475 "firewire: core: convert AR-req handler lock from _irqsave to _bh", a caller of fw_send_request() i.e. initiator of outbound request could no longer do that while having interrupts disabled, if the local node was addressed by that request. In order to make all this more flexible, convert the management of address ranges and handlers from a global lock around readers and writers to RCU (and a remaining global lock for writers). As a minor side effect, handling of inbound requests at different cards and of local requests is now no longer serialized. (There is still per-card serialization of remote requests since firewire-ohci uses a single DMA tasklet for inbound request events.) In other words, address handlers are now called in an RCU read-side critical section instead of from within a spin_lock_bh serialized section. (Changelog rewritten by Stefan R.) Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-09-25firewire: ohci: get IR bit from TSB41BA3D phyStephan Gatzka
In case of a self constructed selfID packet this patch correctly determines the information if the TSB41BA3D phy initiated a bus reset. Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-09-25firewire: core: feed /dev/random with devices' GUIDsClemens Ladisch
Send the GUIDs of newly registered controllers and devices to the /dev/random driver to help seed its pools. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-07-30Merge tag 'firewire-updates' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: - Small fixes and optimizations. - A new sysfs attribute to tell local and remote nodes apart. Useful to set special permissions/ ownership of local nodes' /dev/fw*, to start daemons on them (for diagnostics, management, AV targets, VersaPHY initiator or targets...), to pick up their GUID to use it as GUID of an SBP2 target instance, and of course for informational purposes. * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: document is_local sysfs attribute firewire: core: add is_local sysfs device attribute firewire: ohci: initialize multiChanMode bits after reset firewire: core: fix multichannel IR with buffers larger than 2 GB firewire: ohci: sanity-check MMIO resource firewire: ohci: lazy bus time initialization firewire: core: allocate the low memory region firewire: core: make address handler length 64 bits
2012-06-30firewire: core: add is_local sysfs device attributeClemens Ladisch
Making this information available in sysfs allows to differentiate between controllers in the local and remote Linux PCs, and thus is useful for servers that are started with udev rules. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-06-17firewire: ohci: initialize multiChanMode bits after resetClemens Ladisch
OHCI 1.1 says: | Since the value of this bit is undefined after reset in all IR | contexts, software shall initialize this bit to zero in all contexts | whether or not active to maintain the exclusive nature of this bit. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-06-17firewire: core: fix multichannel IR with buffers larger than 2 GBClemens Ladisch
With a 32-bit i, computing i<<PAGE_SHIFT might result in an overflow and in an eventual sign-extension. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-06-04firewire: ohci: sanity-check MMIO resourceClemens Ladisch
pci_request_region() does not fail on resources that have not been allocated by the BIOS or by the kernel, so to avoid accessing registers that are not there, we have to check for this explicitly. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-27firewire: ohci: lazy bus time initializationClemens Ladisch
The Bus_Time CSR is virtually never used, so we can avoid burning CPU in interrupt context for 1 or 3 IsochronousCycleTimer accesses every minute by not tracking the bus time until the CSR is actually accessed for the first time. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-27firewire: core: allocate the low memory regionClemens Ladisch
Prevent userspace applications from allocating low memory address ranges. Otherwise, if some application happens to allocate such a range and intends for a remote node to access it, and if that node also implements SBP-2 (which will become more likely with the upcoming SBP-2 target support), these accesses would be routed by the physical DMA unit to some wrong memory address. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-24Merge tag 'firewire-updates' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter: - Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization direction (was correct) of isochronous reception buffers of userspace drivers if vma-mapped for R/W access. For example, libdc1394 was affected. - more consistent retry stategy in device discovery/ rediscovery, and improved failure diagnostics - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2 * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: document the absence of alignment requirements firewire: sbp2: remove superfluous blk_queue_max_segment_size() call firewire: sbp2: use scsi_dma_(un)map firewire: sbp2: give correct DMA device to scsi framework firewire: core: fw_device_refresh(): clean up error handling firewire: core: log config rom reading errors firewire: core: log error in case of failed bus manager lock firewire: move rcode_string() to core firewire: core: improve reread_config_rom() interface firewire: core: wait for inaccessible devices after bus reset firewire: ohci: omit spinlock IRQ flags where possible firewire: ohci: correct signedness of a local variable firewire: core: fix DMA mapping direction firewire: use module_pci_driver
2012-05-21firewire: sbp2: document the absence of alignment requirementsClemens Ladisch
The SBP-2/3 specifications do not require any alignment of data buffers; only their own data structures need to be quadlet-aligned [SR: or octlet-aligned]. Fix the comments to reflect this, but leave the actual alignment at 32 bits to avoid theoretical problems with target implementations that might handle this incorrectly. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21firewire: sbp2: remove superfluous blk_queue_max_segment_size() callClemens Ladisch
The SCSI framework automatically initializes the block queue's segment size with the DMA device's segment size. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21firewire: sbp2: use scsi_dma_(un)mapClemens Ladisch
Use the scsi_dma_map/scsi_dma_unmap helper to simplify the code a little. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-21firewire: sbp2: give correct DMA device to scsi frameworkClemens Ladisch
The sbp2 driver does DMA not on the unit but on the card device. The driver worked even with the wrong device because at the moment, it happens to reimplement the DMA functions of the SCSI framework. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-05-09firewire: Move fw_card kref functions into linux/firewire.hChris Boot
When writing a firewire driver that doesn't deal with struct fw_device objects (e.g. it only publishes FireWire units and doesn't subscribe to them), you likely need to keep referenced to struct fw_card objects so that you can send messages to other nodes. This patch moves fw_card_put(), fw_card_get() and fw_card_release() into the public include/linux/firewire.h header instead of drivers/firewire/core.h, and adds EXPORT_SYMBOL_GPL(fw_card_release). The firewire-sbp-target module requires these so it can keep a reference to the fw_card object in order that it can fetch ORBs to execute and read/write related data and status information. Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09firewire: Add function to get speed from opaque struct fw_requestChris Boot
Sometimes it's useful to know the FireWire speed of the request that has just come in to a fw_address_handler callback. As struct fw_request is opaque we can't peek inside to get the speed out of the struct fw_packet that's just inside. For example, the SBP-2 spec says: "The speed at which the block write request to the MANAGEMENT_AGENT register is received shall determine the speed used by the target for all subsequent requests to read the initiator’s configuration ROM, fetch ORB’s from initiator memory or store status at the initiator’s status_FIFO. Command block ORB’s separately specify the speed for requests addressed to the data buffer or page table." [ ANSI T10/1155D Revision 4 page 53/54 ] Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-17firewire: core: fw_device_refresh(): clean up error handlingClemens Ladisch
In fw_device_init() and fw_device_refresh(), if a call to read_cofig_rom() fails, the operation is retried a few times, with these retries being controlled by the MAX_RETRIES and RETRY_DELAY symbols. fw_device_refresh() also reads part of the config rom by calling reread_config_rom(). Any errors from this call resulted in retries with MAX_RETRIES/2 and RETRY_DELAY/2. There is no reason to require that a device that has initiated a bus reset must react faster to read requests than a device that has just been plugged in. Furthermore, if the config rom has changed, any errors from the following read_config_rom() call are then handled with the normal retry count and delay. Remove this inconsistency by always using the normal retry count and delay. (This also makes the two error handlers identical and allows merging them.) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: core: log config rom reading errorsClemens Ladisch
If reading or refreshing a config rom fails, also log the actual error that caused it to fail. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: core: log error in case of failed bus manager lockClemens Ladisch
If the lock access to the bus manager register fails, also log the actual error that caused it to fail. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: move rcode_string() to coreClemens Ladisch
There is nothing audio-specific about the rcode_string() helper, so move it from snd-firewire-lib into firewire-core to allow other code to use it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed sound/firewire/cmp.c)
2012-04-17firewire: core: improve reread_config_rom() interfaceClemens Ladisch
The return value of reread_config_rom() was a mixture of two pieces of information: whether the function succeeded, and whether the config rom had changed. To clarify the semantics, and to allow returning the actual error code, split the second information into a new output parameter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: core: wait for inaccessible devices after bus resetClemens Ladisch
When reread_config_rom() encountered a config rom that was marked as not yet accessible, that device would be treated as "gone". This would mean that that device would effectively vanish until the next bus reset. The correct way to handle this situation is the same as in read_config_rom(), to treat this like other errors and to retry the read later, when the (possibly changed) config rom is available. The device is marked "gone" only if it continues to return zero values after these retries. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: ohci: omit spinlock IRQ flags where possibleStefan Richter
bus_reset_work() is only called from workqueue thread context. ohci_set_config_rom() and ohci_allocate_iso_context() perform GFP_KERNEL memory allocations, therefore they must be called with interrupts enabled. Hence these functions may disable and enable local IRQs without having to track IRQ state. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: ohci: correct signedness of a local variableStefan Richter
bus_reset_work's reg is a bitfield. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-17firewire: core: fix DMA mapping directionStefan Richter
Seen with recent libdc1394: If a client mmap()s the buffer of an isochronous reception buffer with PROT_READ|PROT_WRITE instead of just PROT_READ, firewire-core sets the wrong DMA mapping direction during buffer initialization. The fix is to split fw_iso_buffer_init() into allocation and DMA mapping and to perform the latter after both buffer and DMA context were allocated. Buffer allocation and context allocation may happen in any order, but we need the context type (reception or transmission) in order to set the DMA direction of the buffer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-04-09firewire: use module_pci_driverAxel Lin
This patch converts the drivers in drivers/firewire/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-23Merge tag 'firewire-updates' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull IEEE 1394 (FireWire) subsystem updates post v3.3 from Stefan Richter: - Some SBP-2 initiator fixes, side product from ongoing work on a target. - Reintroduction of an isochronous I/O feature of the older ieee1394 driver stack (flush buffer completions); it was evidently rarely used but not actually unused. Matching libraw1394 code is already available. - Be sure to prefix all kernel log messages with device name or card name, and other logging related cleanups. - Misc other small cleanups, among them a small API change that affects sound/firewire/ too. Clemens Ladisch is aware of it. * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (26 commits) firewire: allow explicit flushing of iso packet completions firewire: prevent dropping of completed iso packet header data firewire: ohci: factor out iso completion flushing code firewire: ohci: simplify iso header pointer arithmetic firewire: ohci: optimize control bit checks firewire: ohci: remove unused excess_bytes field firewire: ohci: copy_iso_headers(): make comment match the code firewire: cdev: fix IR multichannel event documentation firewire: ohci: fix too-early completion of IR multichannel buffers firewire: ohci: move runtime debug facility out of #ifdef firewire: tone down some diagnostic log messages firewire: sbp2: replace a GFP_ATOMIC allocation firewire: sbp2: Fix SCSI sense data mangling firewire: sbp2: Ignore SBP-2 targets on the local node firewire: sbp2: Take into account Unit_Unique_ID firewire: nosy: Use the macro DMA_BIT_MASK(). firewire: core: convert AR-req handler lock from _irqsave to _bh firewire: core: fix race at address_handler unregistration firewire: core: remove obsolete comment firewire: core: prefix log messages with card name ...
2012-03-18firewire: allow explicit flushing of iso packet completionsClemens Ladisch
Extend the kernel and userspace APIs to allow reporting all currently completed isochronous packets, even if the next interrupt packet has not yet been reached. This is required to determine the status of the packets at the end of a paused or stopped stream, and useful for more precise synchronization of audio streams. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18firewire: prevent dropping of completed iso packet header dataClemens Ladisch
The buffer for the header data of completed iso packets has a fixed size, so it is possible to configure a stream with a big interval between interrupt packets or with big headers so that this buffer would overflow. Previously, ohci.c would drop any data that would not fit, but this could make unsuspecting applications believe that fewer than the actual number of packets have completed. Instead of dropping data, add calls to flush_iso_completion() so that there are as many events as needed to report all of the data. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18firewire: ohci: factor out iso completion flushing codeClemens Ladisch
In preparation for the following patches that add more flushing, move the code for flushing accumulated header data into a common function. The timestamp of the last completed packed is passed through the context structure instead of a function parameter to allow accessing this value later outside of the handle_i?_packet functions. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18firewire: ohci: simplify iso header pointer arithmeticClemens Ladisch
When storing the header data of completed iso packets, we effectively treat the buffers as arrays of quadlets. Actually declaring the pointers as u32* avoids repetitive pointer arithmetic, removes the unhelpfully named "i" variables, and thus makes the code clearer. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18firewire: ohci: optimize control bit checksClemens Ladisch
Doing the endian conversion on the constant instead of the memory field allows the compiler to do the conversion at compile time. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18firewire: ohci: remove unused excess_bytes fieldClemens Ladisch
Commit 6498ba04aee6 (remove unused dualbuffer IR code) overlooked a field in struct iso_context. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-18firewire: ohci: copy_iso_headers(): make comment match the codeClemens Ladisch
The comment incorrectly talked about one little-endian quadlet, while there are actually two. Furthermore, the endianness of the remaining headers depends on whatever protocol is used, so don't mention them. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-17firewire: ohci: fix too-early completion of IR multichannel buffersClemens Ladisch
handle_ir_buffer_fill() assumed that a completed descriptor would be indicated by a non-zero transfer_status (as in most other descriptors). However, this field is written by the controller as soon as (the end of) the first packet has been written into the buffer. As a consequence, if we happen to run into such a descriptor when the interrupt handler is executed after such a packet has completed, the descriptor would be taken out of the list of active descriptors as soon as the buffer had been partially filled, so the event for the buffer being completely filled would never be sent. To fix this, handle descriptors only when they have been completely filled, i.e., when res_count == 0. (This also matches the condition that is reported by the controller with an interrupt.) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.36+ <stable@vger.kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10firewire: ohci: move runtime debug facility out of #ifdefStefan Richter
CONFIG_FIREWIRE_OHCI_DEBUG could have been exposed to kernel tweakers if CONFIG_EXPERT was set. But in hindsight, this stuff is far too useful to omit it. So get rid of two #else branches that are only going to bitrot otherwise. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10firewire: tone down some diagnostic log messagesStefan Richter
The "skipped bus generations" message was added together with the respective fw_device retaining/ reviving code in order to see how it all works out. It did well, so don't spam the log anymore. The "register access failure" situation still needs an actual handler. But at this point it makes less sense to ask folks to send mails about it. We now have a pretty good picture of what controllers emit this and when: Texas Instruments PCIxx21 FireWire + CardBus + flash memory card controller: https://bugzilla.redhat.com/show_bug.cgi?id=608544 O2 Micro FireWire + flash memory card controller: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801719 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/881688 http://marc.info/?l=linux1394-devel&m=132309283531423 http://marc.info/?l=linux1394-devel&m=132368567907469 http://marc.info/?l=linux1394-devel&m=132516165727468 http://marc.info/?l=linux1394-devel&m=133006486927699 Pinnacle Movieboard: commit 7f7e37115a8b6724f26d0637a04e1d35e3c59717 http://marc.info/?l=linux1394-devel&m=130714243325962 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-03-10firewire: sbp2: replace a GFP_ATOMIC allocationStefan Richter
sbp2_send_management_orb() is called by sbp2_login, sbp2_reconnect, and sbp2_remove, all which are able to sleep during memory allocations. Actually, sbp2_send_management_orb() itself is a sleeping function. Login and remove could allocate with GFP_KERNEL but reconnect needs GFP_NOIO to ensure progress in low memory situations. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>