summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-samsung.c
AgeCommit message (Collapse)Author
2012-12-13Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC driver specific changes from Olof Johansson: "A collection of mostly SoC-specific driver updates: - a handful of pincontrol and setup changes - new drivers for hwmon and reset controller for vexpress - timing support updates for OMAP (gpmc and other interfaces) - plus a collection of smaller cleanups" * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: ux500: fix pin warning ARM: OMAP2+: tusb6010: generic timing calculation ARM: OMAP2+: smc91x: generic timing calculation ARM: OMAP2+: onenand: generic timing calculation ARM: OMAP2+: gpmc: generic timing calculation ARM: OMAP2+: gpmc: handle additional timings ARM: OMAP2+: nand: remove redundant rounding gpio: samsung: use pr_* instead of printk ARM: ux500: fixup magnetometer pins ARM: ux500: add STM pin configuration ARM: ux500: 8500: add pinctrl support for uart1 and uart2 ARM: ux500: cosmetic fixups for uart0 gpio: samsung: Fix input mode setting function for GPIO int ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip ARM: ux500: 8500: define SDI sleep states ARM: vexpress: Reset driver ARM: ux500: 8500: update SKE keypad pinctrl table hwmon: Versatile Express hwmon driver ARM: ux500: delete duplicate macro ARM: ux500: 8500: add IDLE pin configuration for SPI ...
2012-11-07gpio: samsung: use pr_* instead of printkJingoo Han
This patch uses pr_* instead of printk. Also, gpio_dbg is replaced with pr_debug. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by/Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-07gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12Tomasz Figa
This patch modifies the Samsung GPIO driver to check for pinctrl driver presence earlier and use generic matching instead of a single compatible value. This allows us to fix warning about unrecognized SoC in case of EXYNOS4X12, which is not supported by this driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-23gpio: samsung: Fix input mode setting function for GPIO intEunki Kim
This patch makes GPIO pin to INTERRUPT mode or INPUT mode according to bitmap_gpio_int. When the related bit of bitmap_gpio_int is set, it makes GPIO pin to INTERRUPT mode instrad of INPUT mode in the samsung_gpiolib_4bit_input function. Signed-off-by: Eunki Kim <eunki_kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-02Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-10-02Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...
2012-09-07gpio: samsung: add devicetree init for s3c24xx archesHeiko Stuebner
Until now the EXYNOS-SoC was the only Samsung-SoC supporting the GPIOs via the device tree. This patch implements dt-support for the s3c24xx arches. The controllers contain only 3 cells, as the underlying gpio controller does not support controlling the drive strength on a gpio level. Tested with the gpio-keys driver on a s3c2416 based machine. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> [kgene.kim@samsung.com: fixed build error] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-06gpio: exynos4: skip gpiolib registration if pinctrl driver is usedThomas Abraham
Pinctrl driver, when enabled, registers all the gpio pins and hence the registration of gpio pins by this driver can be skipped. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-08-28gpio-samsung: Remove now unused s3c2410_gpio* APISylwester Nawrocki
There is no more users of s3c2410_gpio_pullup(), s3c2410_gpio_setpin() and s3c2410_gpio_getpin() so remove theese functions. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-08-07gpio: samsung: Fix off-by-one bug in gpio addressesSean Paul
Move gpc4 to the end of the automatically processed gpio controllers so we don't taint the automatic offset calculation. This bug caused all controllers coming after gpc4 to map to the incorrect address. The result is <&gpd1 0 0 0 0> would actually map to GPIO 0 in gpd0. Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Doug Anderson <dianders@chromium.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17gpio: samsung: add flags specifier to device-tree bindingOlof Johansson
This adds a flags field to the gpio specifier for Samsung. I didn't want to add yet another field in the already quite long specifier, so I decided to compress it together with the Pull Up/Down settings instead. This is needed to, for example, have a gpio-keys input that is active low. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-04gpio/samsung: fix the typo 'exynos5_xxx' instead of 'exonys5_xxx'Kukjin Kim
Should be 'exynos5_xxx' instead of 'exonys5_xxx'. It happened at the commit 30b842889eea ("Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc") during v3.5 merge window. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [ My bad - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-26Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
2012-05-24Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull GPIO driver changes from Grant Likely: "Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits) gpio/generic: initialize basic_mmio_gpio shadow variables properly gpiolib: Remove 'const' from data argument of gpiochip_find() gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 gpiolib: quiet gpiochip_add boot message noise gpio: mpc8xxx: Prevent NULL pointer deref in demux handler gpio/lpc32xx: Add device tree support gpio: Adjust of_xlate API to support multiple GPIO chips gpiolib: Implement devm_gpio_request_one() gpio-mcp23s08: dbg_show: fix pullup configuration display Add support for TCA6424A gpio/omap: (re)fix wakeups on level-triggered GPIOs gpio/omap: fix broken context restore for non-OFF mode transitions gpio/omap: fix missing check in *_runtime_suspend() gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume() gpio/omap: remove suspend/resume callbacks gpio/omap: remove retrigger variable in gpio_irq_handler gpio/omap: remove saved_wakeup field from struct gpio_bank gpio/omap: remove suspend_wakeup field from struct gpio_bank gpio/omap: remove saved_fallingdetect, saved_risingdetect gpio/omap: remove virtual_irq_start variable ... Conflicts: drivers/gpio/gpio-samsung.c
2012-05-15ARM: EXYNOS: add GPC4 bank instanceSangsu Park
Add GPC4 bank instance which is included in rev1 of EXYNOS5. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-12gpio/exynos: Fix compiler warnings when non-exynos machines are selectedSachin Kamat
Fixes the following compiler warnings: drivers/gpio/gpio-samsung.c: In function ‘samsung_gpiolib_init’: drivers/gpio/gpio-samsung.c:2980:1: warning: label ‘err_ioremap1’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2978:1: warning: label ‘err_ioremap2’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2976:1: warning: label ‘err_ioremap3’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2974:1: warning: label ‘err_ioremap4’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2722:55: warning: unused variable ‘gpio_base4’ [-Wunused-variable] drivers/gpio/gpio-samsung.c:455:32: warning: ‘exynos_gpio_cfg’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2126:33: warning: ‘exynos4_gpios_1’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2228:33: warning: ‘exynos4_gpios_2’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2373:33: warning: ‘exynos4_gpios_3’ defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-11gpio: samsung: refactor gpiolib init for exynos4/5Olof Johansson
Only code move, no functional change. Main reason to do this was to get rid of the warnings: drivers/gpio/gpio-samsung.c: In function 'samsung_gpiolib_init': drivers/gpio/gpio-samsung.c:2974:1: warning: label 'err_ioremap4' defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2722:47: warning: unused variable 'gpio_base4' [-Wunused-variable] without adding more ifdef mess. I think this whole file would do well being coverted over to a platform driver and moving most of the tables out to SoC code and/or device trees, but since that changes init ordering it needs to be done with some care, i.e. not at this time. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-11gpio/exynos: Fix compiler warning in gpio-samsung.c fileSachin Kamat
Fixes the following warning when "SAMSUNG EXYNOS5" is not selected: warning: ‘exynos5_gpios_1’ defined but not used [-Wunused-variable] warning: ‘exynos5_gpios_2’ defined but not used [-Wunused-variable] warning: ‘exynos5_gpios_3’ defined but not used [-Wunused-variable] warning: ‘exynos5_gpios_4’ defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-14gpio/samsung: use ioremap() for EXYNOS4 GPIOlibSangsu Park
This patch changes to use ioremap() for EXYNOS4210 so that we can drop the static mapping for EXYNOS SoCs. Note: Will be updated for all of Samsung GPIOlibs to use ioremap() next time. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-14gpio/samsung: add support GPIOlib for EXYNOS5250Sangsu Park
This patch adds gpio_chips for EXYNOS5250 and replaces exynos4_xxx() with exynos_xxx() and variables to support exynos4 and exynos5 together. In addition, use ioreamp() for base address of gpios. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-02-02gpio: samsung: adapt to changes in gpio specifier translator function ↵Thomas Abraham
declaration Commit 15c9a0acc3f7 (of: create of_phandle_args to simplify return of phandle parsing data) modifies the parameter list of of_xlate function pointer declaration in gpio_chip. Adapt the gpio specifier translate function for this change. Reported-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Tested-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-09Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Device tree conversions for samsung and tegra Both platforms had some initial device tree support, but this adds much more to actually make it usable. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN ARM: EXYNOS: Add Exynos4 device tree enabled board file rtc: rtc-s3c: Add device tree support input: samsung-keypad: Add device tree support ARM: S5PV210: Modify platform data for pl330 driver ARM: S5PC100: Modify platform data for pl330 driver ARM: S5P64x0: Modify platform data for pl330 driver ARM: EXYNOS: Add a alias for pdma clocks ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers DMA: PL330: Add device tree support ARM: EXYNOS: Modify platform data for pl330 driver DMA: PL330: Infer transfer direction from transfer request instead of platform data DMA: PL330: move filter function into driver serial: samsung: Fix build for non-Exynos4210 devices serial: samsung: add device tree support serial: samsung: merge probe() function from all SoC specific extensions serial: samsung: merge all SoC specific port reset functions ARM: SAMSUNG: register uart clocks to clock lookup list serial: samsung: remove all uses of get_clksrc and set_clksrc ... Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and drivers/tty/serial/Kconfig both due to just adding code close to changes.
2012-01-07Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Changes queued in gpio/next for the start of the 3.3 merge window * tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6: gpio: Add decode of WM8994 GPIO configuration gpio: Convert GPIO drivers to module_platform_driver gpio: Fix typo in comment in Samsung driver gpio: Explicitly index samsung_gpio_cfgs gpio: Add Linus Walleij as gpio co-maintainer of: Add device tree selftests of: create of_phandle_args to simplify return of phandle parsing data gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags() gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags() gpiolib: output basic details and consolidate gpio device drivers pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH spi/pl022: make the chip deselect handling thread safe spi/pl022: add support for pm_runtime autosuspend spi/pl022: disable the PL022 block when unused spi/pl022: move device disable to workqueue thread spi/pl022: skip default configuration before suspending spi/pl022: fix build warnings spi/pl022: only enable RX interrupts when TX is complete
2012-01-02gpio: Fix typo in comment in Samsung driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-02gpio: Explicitly index samsung_gpio_cfgsMark Brown
Make it easier to follow the by number references into samsung_gpio_cfgs by putting the indexes into the code initialising the array, improving readability a bit. Ideally we wouldn't be using magic array indexes at all but this is easier than coming up with a better way. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-23gpio/samsung: Add device tree support for EXYNOS4Thomas Abraham
As gpio chips get registered, a device tree node which represents the gpio chip is searched and attached to it. A translate function is also provided to convert the gpio specifier into actual platform settings for pin function selection, pull up/down and driver strength settings. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> [kgene.kim@samsung.com: fixed build error] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-22driver-core: remove sysdev.h usage.Kay Sievers
The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2011-10-17gpio/samsung: Complain loudly if we don't know the SoCMark Brown
If we don't know the SoC type then we won't add any chips which is rather unfortunate as neither GPIO nor pinmux APIs will work, breaking lots of different subsystems. Logging at least provides a hint to the user as to what's gone wrong. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-12gpio/samsung: Move SoC specific codes within macroTushar Behera
In drivers/gpio/gpio-samsung.c, there are certain structures and functions which are not getting used if the particular CPU is not selected. These code segments are moved under CPU specific macros to remove compilation warnings. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-12gpio/samsung: Fix incorrect gpio pull up/down callback for EXYNOS4Thomas Abraham
Some of the gpio chips of exynos4 are assigned a default gpio config without the exynos4 specific pull up/down callbacks which resulted in incorrect setting of pull up/down configuration. Fix this by adding two new exynos4 specific entries in the array of default configs with set_pull and get_pull callbacks set to exynos4 specific callbacks The new default gpio configs can then be used for exynos4 gpio chips. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-12gpio/samsung: only register available gpio banksPeter Korsgaard
Only register gpio banks provided by SoC instead of the maximum possible to lessen confusion, get rid of a warning from gpiolib and stop it from eating into the extra gpios for configs with S3C24XX_GPIO_EXTRA != 0. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04gpio/samsung: correct pin configuration for S5PC100/S5PC110/EXYNOS4Marek Szyprowski
Commit 1b39d5f2cc introduced new common gpio driver for all Samsung GPIO SoCs. The new driver use wrong configuration setup for all gpio pins on S5PC100 and S5PV210 SoCs and external interrupt lines on Exynos4 SoCs. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04gpio/samsung: fix GPIO interrupt registration for EXYNOS4 SoCsMarek Szyprowski
Commit 1b39d5f2cc introduced new common gpio driver for all Samsung GPIO SoCs. The new driver doesn't correctly register GPIO interrupts on Samsung Exynos4 SoCs. This is caused by a typo in define name. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-04gpio/samsung: fix broken configuration for EXYNOS4 GPIO banksMarek Szyprowski
Commit 1b39d5f2cc introduced new common gpio driver for all Samsung GPIO SoCs. The new driver doesn't work correctly on Samsung Exynos4 SoC. It fails to set configuration for all but external interrupt pins. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-21gpio/samsung: gpio-samsung.c to support Samsung GPIOsKukjin Kim
This patch adds support for Samsung GPIOs with one gpio driver and removes old GPIO drivers which are drivers/gpio-s3c24xx.c, gpio-s3c64xx.c, gpio-s5p64x0.c, gpio-s5pc100.c, gpio-s5pv210.c, gpio-exynos4.c, gpio-plat-samsung.c, plat-samsung/gpio-config.c and gpio.c to support each Samsung SoCs before. Because the gpio-samsung.c can replace old Samsung GPIO drivers. Basically, the gpio-samsung.c has been made by their merging and removing duplicated definitions. Note: gpio-samsung.c includes some SoC dependent codes and it will be replaced next time. Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> [kgene.kim@samsung.com: squash the removing and adding patches] [kgene.kim@samsung.com: fixes bug during to register of gpio_chips] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>