summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2012-06-04gpio/samsung: fix the typo 'exynos5_xxx' instead of 'exonys5_xxx'Kukjin Kim
Should be 'exynos5_xxx' instead of 'exonys5_xxx'. It happened at the commit 30b842889eea ("Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc") during v3.5 merge window. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [ My bad - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
2012-05-29Merge tag 'mfd-3.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-26Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
2012-05-26Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc device tree conversions (part 2) from Olof Johansson: "These continue the device tree work from part 1, this set is for the tegra, mxs and imx platforms, all of which have dependencies on clock or pinctrl changes submitted earlier." Fix up trivial conflicts due to nearby changes in drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: dt: tegra: invert status=disable vs status=okay ARM: dt: tegra: consistent basic property ordering ARM: dt: tegra: sort nodes based on bus order ARM: dt: tegra: remove duplicate device_type property ARM: dt: tegra: consistenly use lower-case for hex constants ARM: dt: tegra: format regs properties consistently ARM: dt: tegra: gpio comment cleanup ARM: dt: tegra: remove unnecessary unit addresses ARM: dt: tegra: whitespace cleanup ARM: dt: tegra cardhu: fix typo in SDHCI node name ARM: dt: tegra: cardhu: register core regulator tps62361 ARM: dt: tegra30.dtsi: Add SMMU node ARM: dt: tegra20.dtsi: Add GART node ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes ARM: dt: tegra: Add device tree support for AHB ARM: dts: enable audio support for imx28-evk ARM: dts: enable i2c device for imx28-evk i2c: mxs: add device tree probe support ARM: dts: enable mmc for imx28-evk ...
2012-05-24Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull GPIO driver changes from Grant Likely: "Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits) gpio/generic: initialize basic_mmio_gpio shadow variables properly gpiolib: Remove 'const' from data argument of gpiochip_find() gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 gpiolib: quiet gpiochip_add boot message noise gpio: mpc8xxx: Prevent NULL pointer deref in demux handler gpio/lpc32xx: Add device tree support gpio: Adjust of_xlate API to support multiple GPIO chips gpiolib: Implement devm_gpio_request_one() gpio-mcp23s08: dbg_show: fix pullup configuration display Add support for TCA6424A gpio/omap: (re)fix wakeups on level-triggered GPIOs gpio/omap: fix broken context restore for non-OFF mode transitions gpio/omap: fix missing check in *_runtime_suspend() gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume() gpio/omap: remove suspend/resume callbacks gpio/omap: remove retrigger variable in gpio_irq_handler gpio/omap: remove saved_wakeup field from struct gpio_bank gpio/omap: remove suspend_wakeup field from struct gpio_bank gpio/omap: remove saved_fallingdetect, saved_risingdetect gpio/omap: remove virtual_irq_start variable ... Conflicts: drivers/gpio/gpio-samsung.c
2012-05-22Merge tag 'driver-core-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the driver core, and other driver subsystems, pull request for the 3.5-rc1 merge window. Outside of a few minor driver core changes, we ended up with the following different subsystem and core changes as well, due to interdependancies on the driver core: - hyperv driver updates - drivers/memory being created and some drivers moved into it - extcon driver subsystem created out of the old Android staging switch driver code - dynamic debug updates - printk rework, and /dev/kmsg changes All of this has been tested in the linux-next releases for a few weeks with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed that a patch to the deleted drivers/misc/max8997-muic.c driver needs to be applied to this one. * tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits) uio_pdrv_genirq: get irq through platform resource if not set otherwise memory: tegra{20,30}-mc: Remove empty *_remove() printk() - isolate KERN_CONT users from ordinary complete lines sysfs: get rid of some lockdep false positives Drivers: hv: util: Properly handle version negotiations. Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp() memory: tegra{20,30}-mc: Use dev_err_ratelimited() driver core: Add dev_*_ratelimited() family Driver Core: don't oops with unregistered driver in driver_find_device() printk() - restore prefix/timestamp printing for multi-newline strings printk: add stub for prepend_timestamp() ARM: tegra30: Make MC optional in Kconfig ARM: tegra20: Make MC optional in Kconfig ARM: tegra30: MC: Remove unnecessary BUG*() ARM: tegra20: MC: Remove unnecessary BUG*() printk: correctly align __log_buf ARM: tegra30: Add Tegra Memory Controller(MC) driver ARM: tegra20: Add Tegra Memory Controller(MC) driver printk() - restore timestamp printing at console output printk() - do not merge continuation lines of different threads ...
2012-05-22gpio: tps65910: dt: process gpio specific device node infoLaxman Dewangan
Parse the gpio specific device node information locally. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-22gpio: Add Intel Centerton support to gpio-schSeth Heasley
This patch adds the Intel Centerton processor device ID for GPIO. The device ID is defined in include/linux/pci_ids.h Signed-off-by: Seth Heasley <seth.heasley@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-22Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull support for new arm SoCs from Olof Johansson: "Three new system-on-chip models are supported: the st-ericsson u9540 in ux500, the sam9n12 in at91 and the emma ev2 in shmobile. Emma is a little bit special because it is completely unrelated to the classic shmobile models, but the new Renesas rmobile SoCs are a combination of things from both Emma and shmobile, so it was decided to have them all live in one directory. This also contains updates to existing shmobile soc code as well as some related board changes due to dependencies." * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) mach-shmobile: Use DT_MACHINE for KZM9D V3 mach-shmobile: Emma Mobile EV2 DT support V3 mach-shmobile: KZM9D board Ethernet support V3 mach-shmobile: Emma Mobile EV2 GPIO support V3 mach-shmobile: Emma Mobile EV2 SMP support V3 mach-shmobile: KZM9D board support V3 mach-shmobile: Emma Mobile EV2 SoC base support V3 gpio: Emma Mobile GPIO driver V2 ARM: mach-shmobile: sh73a0: fixup PINT/IRQ16-IRQ31 irq number conflict ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s ARM: mach-shmobile: clock-r8a7740: add MMCIF clock ARM: mach-shmobile: clock-r8a7740: add SDHI clock ARM: mach-shmobile: clock-r8a7740: add USB clock ARM: mach-shmobile: clock-r8a7740: add FSI clock ARM: mach-shmobile: r8a7740: cleanup I2C workaround method ARM: mach-shmobile: r8a7740: add gpio_irq support ARM: mach-shmobile: sh7372: Add FSI DMAEngine support ARM / mach-shmobile: Use preset_lpj with calibrate_delay() ARM: ux500: ioremap differences for DB9540 ARM: ux500: core U9540 support ...
2012-05-22Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull device tree conversions for arm-soc, part 1, from Olof Johansson: "The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game of booting using device trees, which is a great step forward for them. at91 and spear have pretty much completed this process with a huge amount of work being put into at91. The other platforms are continuing the process. We finally start to see the payback on this investment, as new machines are getting supported purely by adding a .dts source file that can be completely independent of the kernel source." Fix up trivial conflict in arch/arm/Kconfig * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files arm/dts: omap4-panda: Add LEDs support arm/dts: omap4-sdp: Add LEDs support arm/dts: twl4030: Add twl4030-gpio node OMAP4: devices: Do not create mcpdm device if the dtb has been provided OMAP4: devices: Do not create dmic device if the dtb has been provided Documentation: update docs for mmp dt ARM: dts: refresh dts file for arch mmp ARM: mmp: support pxa910 with device tree ARM: mmp: support mmp2 with device tree gpio: pxa: parse gpio from DTS file ARM: mmp: support DT in timer ARM: mmp: support DT in irq ARM: mmp: append CONFIG_MACH_MMP2_DT ARM: mmp: fix build issue on mmp with device tree ARM: ux500: Enable PRCMU Timer 4 (clocksource) for Device Tree ARM: ux500: Disable SMSC911x platform code registration when DT is enabled ARM: ux500: Fork cpu-db8500 platform_devs for sequential DT enablement ARM: ux500: Do not attempt to register non-existent i2c devices on Snowball ARM: SPEAr3xx: Correct keyboard data passed from DT ...
2012-05-21GPIO: MIPS: lantiq: convert gpio-stp-xway to OFJohn Crispin
Implements OF support and add code to load custom properties from the DT. The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a peripheral controller used to drive external shift register cascades. At most 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem to drive the 2 LSBs of the cascade automatically. Newer socs are also able to automatically drive some pins via the internal PHYs. The driver currently only supports output functionality. Patches for the input feature found on newer generations of the soc will be provided in a later series. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3839/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-21GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpioJohn Crispin
Implements OF support and convert to of_mm_gpio. By attaching hardware latches to the External Bus Unit (EBU) on Lantiq SoC, it is possible to create output only gpios. This driver configures a special memory address, which when written to, outputs 16 bit to the latches. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-21GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folderJohn Crispin
Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them buildable. The following 2 patches will convert the drivers to OF. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-20mfd: Convert wm831x to irq_domainMark Brown
The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20gpio: Convert tps65910 to a platform driverLaxman Dewangan
Make the gpio-tps65910 as platform driver and register this from tps65910 core driver as mfd sub device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Commonize tps65910 regmap access through headerRhyland Klein
This change removes the read/write callback functions in favor of common regmap accessors inside the header file. This change also makes use of regmap_read/write for single register access which maps better onto what this driver actually needs. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-19gpio/generic: initialize basic_mmio_gpio shadow variables properlyShawn Guo
It fixes the issue in gpio-generic that commit fb14921 (gpio/mxc: add missing initialization of basic_mmio_gpio shadow variables) manged to fix in gpio-mxc driver, so that other platform specific drivers do not suffer from the same problem over and over again. Changes since v1: * Turn the last parameter of bgpio_init() "bool big_endian" into "unsigned long flags" and give those really quirky hardwares a chance to tell that reg_set and reg_dir are unreadable. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [grant.likely: Fix big-endian usage to explicitly set BBGPIOF_BIG_ENDIAN] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19gpiolib: Remove 'const' from data argument of gpiochip_find()Grant Likely
Commit 3d0f7cf0 "gpio: Adjust of_xlate API to support multiple GPIO chips" changed the api of gpiochip_find to drop const from the data parameter of the match hook, but didn't also drop const from data causing a build warning. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583Laxman Dewangan
The PMIC device RC5T583 from RICOH supports 8 gpios. Adding gpio driver for this device to access the pins control through gpio library. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [grant.likely: slight cosmetic changes] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19gpiolib: quiet gpiochip_add boot message noiseH Hartley Sweeten
The pr_info message in gpiochip_add gets displayed for every gpiochip registered. When first bringing up a system this information could be helpful but for normal use it's just a bunch of noise. Change the message to a pr_debug. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18Merge branch 'for_3.5/fixes/gpio-2' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next
2012-05-18gpio: mpc8xxx: Prevent NULL pointer deref in demux handlerThomas Gleixner
commit cfadd838(powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver) added an unconditional call of chip->irq_eoi() to the demux handler. This leads to a NULL pointer derefernce on MPC512x platforms which use this driver as well. Make it conditional. Reported-by: Thomas Wucher <thwucher@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Felix Radensky <felix@embedded-sol.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: stable@vger.kernel.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18gpio/lpc32xx: Add device tree supportRoland Stigge
This patch adds device tree support for gpio-lpc32xx.c. To register the various GPIO banks as (struct) gpio_chips via the same DT gpio-controller, we utilize the adjusted of_xlate API to manipulate the actually used struct gpio_chip. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18gpio: Adjust of_xlate API to support multiple GPIO chipsGrant Likely
This patch changes the of_xlate API to make it possible for multiple gpio_chips to refer to the same device tree node. This is useful for banked GPIO controllers that use multiple gpio_chips for a single device. With this change the core code will try calling of_xlate on each gpio_chip that references the device_node and will return the gpio number for the first one to return 'true'. Tested-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18gpiolib: Implement devm_gpio_request_one()Mark Brown
Allow drivers to use the modern request and configure idiom together with devres. As with plain gpio_request() and gpio_request_one() we can't implement the old school version in terms of _one() as this would force the explicit selection of a direction in gpio_request() which could break systems if we pick the wrong one. Implementing devm_gpio_request_one() in terms of devm_gpio_request() would needlessly complicate things or lead to duplication from the unmanaged version depending on how it's done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18gpio-mcp23s08: dbg_show: fix pullup configuration displayPeter Korsgaard
Pullups are enabled when bits are set, not when cleared. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18Add support for TCA6424AAndreas Schallenberg
This patch extends the PCA953x driver to support TI's TCA6424A 24 bit I2C I/O expander. The patch is based on code by Michele Bevilacqua. Changes in v2: - Compare ngpio against 24 in both places, not >16 - Larger datatype now u32 instead of uint. Bit fields not used for struct members since their address is taken. - Be precise: TCA6424A (untested for older TCA6424) Signed-off-by: Andreas Schallenberg<Andreas.Schallenberg@3alitytechnica.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-18gpio/omap: (re)fix wakeups on level-triggered GPIOsKevin Hilman
commit 1b1287032 (gpio/omap: fix missing check in *_runtime_suspend()) broke wakeups on level-triggered GPIOs by adding the enabled non-wakeup GPIO check before the workaround that enables wakeups on level-triggered IRQs, effectively disabling that workaround. To fix, move the enabled non-wakeup GPIO check after the level-triggered IRQ workaround. Reported-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Tested-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-18gpio/omap: fix broken context restore for non-OFF mode transitionsKevin Hilman
The fix in commit 1b1287032 (gpio/omap: fix missing check in *_runtime_suspend()) exposed another bug in the context restore path. Currently, the per-bank context restore happens whenever the context loss count is different in runtime suspend and runtime resume *and* whenever the per-bank contex_loss_count == 0: if (context_lost_cnt_after != bank->context_loss_count || !context_lost_cnt_after) { omap_gpio_restore_context(bank); Restoring context when the context_lost_cnt_after == 0 is clearly wrong, since this will be true until the first off-mode transition (which could be never, if off-mode is never enabled.) This check causes the context to be restored on *every* runtime PM transition. Before commit 1b1287032 (gpio/omap: fix missing check in *_runtime_suspend()), this code was never executed in non-OFF mode, so there were never spurious context restores happening. After that change though, spurious context restores could happen. To fix, simply remove the !context_lost_cnt_after check. It is not needed. This bug was found when noticing that the smc911x NIC on 3530/Overo was not working, and git bisect tracked it down to this patch. It seems that the spurious context restore was causing the smsc911x to not be properly probed on this platform. Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-17gpio: Emma Mobile GPIO driver V2Magnus Damm
This patch is V2 of the Emma Mobile GPIO driver. This driver is designed to be reusable between multiple SoCs that share the same basic building block, but so far it has only been used on Emma Mobile EV2. Each driver instance handles 32 GPIOs with individually maskable IRQs. The driver operates on two I/O memory ranges and the 32 GPIOs are hooked up to two interrupts. In the case of Emma Mobile EV2 this GPIO building block is used as main external interrupt controller hooking up 159 GPIOS as 159 interrupts via 5 driver instances and 10 interrupts to the GIC and the Cortex-A9 Dual. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-15ARM: EXYNOS: add GPC4 bank instanceSangsu Park
Add GPC4 bank instance which is included in rev1 of EXYNOS5. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-05-13Merge branch 'mxs/dt/for-3.5' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt2 * 'mxs/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: (51 commits) ARM: dts: enable audio support for imx28-evk ARM: dts: enable i2c device for imx28-evk i2c: mxs: add device tree probe support ARM: dts: enable mmc for imx28-evk ARM: dts: enable mmc for imx23-evk mmc: mxs-mmc: add device tree support mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host mmc: mxs-mmc: use devm_* helper to make cleanup simpler mmc: mxs-mmc: move header from mach into linux folder mmc: mxs-mmc: get rid of the use of cpu_is_xxx mmc: mxs-mmc: let ssp_is_old take host as parameter mmc: mxs-mmc: use global stmp_device functionality ARM: mxs: add gpio support for device tree boot gpio/mxs: add device tree probe gpio/mxs: get rid of the use of cpu_is_xxx gpio/mxs: use devm_* helpers to make error handling simple ARM: mxs: add mxs-dma dt support ARM: mxs: do not add dma device by default dma: mxs-dma: add device tree probe support ...
2012-05-13Merge tag 'ux500-gpio-pins-for-3.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/pinctrl ux500 GPIO and pinctrl changes for kernel 3.5 * tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver pinctrl: add sleep state definition pinctrl/nomadik: implement pin configuration pinctrl/nomadik: implement pin multiplexing pinctrl/nomadik: reuse GPIO debug function for pins pinctrl/nomadik: break out single GPIO debug function pinctrl/nomadik: basic Nomadik pinctrl interface pinctrl/nomadik: !CONFIG_OF build error gpio: move the Nomadik GPIO driver to pinctrl Context conflicts resolved in drivers/pinctrl/Kconfig and drivers/pinctrl/Makefile. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-12Merge branch 'imx/pinctrl/for-3.5' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into next/pinctrl * 'imx/pinctrl/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: (290 commits) ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support tty: serial: imx: adopt pinctrl support mmc: sdhci-imx-esdhc: adopt pinctrl support ARM: imx6q: switch to use pinctrl subsystem ARM: mxs: enable pinctrl dummy states ARM: imx: enable pinctrl dummy states +3.4-rc5 update
2012-05-12gpio/mxs: add device tree probeShawn Guo
It adds device tree probe for gpio-mxs driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-12gpio/mxs: get rid of the use of cpu_is_xxxShawn Guo
It removes the use of cpu_is_xxx from gpio-mxs driver and instead use platform_device_id to identify the device. Accordingly, mxs platform code is changed to register gpio device with different names, and the registeration are done in soc specific initialization functions now, so postcore_initcall(mxs_add_mxs_gpio) gets removed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-12gpio/mxs: use devm_* helpers to make error handling simpleShawn Guo
It uses devm_* helpers to make the error handling of probe clean and simple. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-12Merge branch 'for_3.5/gpio/cleanup' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next
2012-05-12gpio/exynos: Fix compiler warnings when non-exynos machines are selectedSachin Kamat
Fixes the following compiler warnings: drivers/gpio/gpio-samsung.c: In function ‘samsung_gpiolib_init’: drivers/gpio/gpio-samsung.c:2980:1: warning: label ‘err_ioremap1’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2978:1: warning: label ‘err_ioremap2’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2976:1: warning: label ‘err_ioremap3’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2974:1: warning: label ‘err_ioremap4’ defined but not used [-Wunused-label] drivers/gpio/gpio-samsung.c:2722:55: warning: unused variable ‘gpio_base4’ [-Wunused-variable] drivers/gpio/gpio-samsung.c:455:32: warning: ‘exynos_gpio_cfg’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2126:33: warning: ‘exynos4_gpios_1’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2228:33: warning: ‘exynos4_gpios_2’ defined but not used [-Wunused-variable] drivers/gpio/gpio-samsung.c:2373:33: warning: ‘exynos4_gpios_3’ defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-12gpio: pch9: Use proper flow type handlersThomas Gleixner
Jean-Francois Dagenais reported: Configuring a gpio pin with the gpio-pch driver with "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for threaded ISR until the ISR thread actually gets to physically clear the interrupt on the triggering chip!! The immediate observable symptom is the high CPU usage for my ISR thread task and the interrupt count in /proc/interrupts incrementing radically. The driver is wrong in several ways: 1) Using handle_simple_irq() does not provide proper flow control handling. In the case of oneshot threaded handlers for the demultiplexed interrupts this results in an interrupt storm because the simple handler does not deal with masking/unmasking. Even without threaded oneshot handlers an interrupt storm for level type interrupts can easily be triggered when the interrupt is disabled and the interrupt line is activated from the device. 2) Acknowlegding the demultiplexed interrupt before calling the handler is wrong for level type interrupts. 3) The set_type function unconditionally enables the interrupt. It's supposed to set the type and nothing else. The unmasking is done by the core code. Move the acknowledge code into a separate function and add it to the demux irqchip callbacks. Remove the unconditional enabling from the set_type() callback and set the proper flow handlers depending on the selected type (level/edge). Reported-and-tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-12gpio/omap: fix missing check in *_runtime_suspend()Tarun Kanti DebBarma
We do checking for bank->enabled_non_wakeup_gpios in order to skip redundant operations. Somehow, the check got missed while doing the cleanup series. Just to make sure that we do context restore correctly in *_runtime_resume(), the bank->workaround_enabled check is moved after context restore. Otherwise, it would prevent context restore when bank->enabled_non_wakeup_gpios is 0. Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-12gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()Tarun Kanti DebBarma
Add register offsets for GPIO_IRQSTATUS_RAW_0, GPIO_IRQSTATUS_RAW_0 which are present on OMAP4+ processors. Now we can distinguish conditions applicable to OMAP4,5 and those specific to OMAP24xx and OMAP3xxx. Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-12gpio/omap: remove suspend/resume callbacksTarun Kanti DebBarma
Both omap_gpio_suspend() and omap_gpio_resume() does programming of wakeup_en register. _gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0); _gpio_rmw(base, bank->regs->wkup_en, bank->context.wake_en, 1); This is redundant in omap_gpio_suspend() because wakeup_en register automatically gets initialized in _set_gpio_wakeup() and set_gpio_trigger() while being called either from chip.irq_set_wake() or chip.irq_set_type(). This is also redundant in omap_gpio_resume() because wakeup_en register is programmed in omap_gpio_restore_context() called which is called from runtime resume callback. Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-12gpio/omap: remove retrigger variable in gpio_irq_handlerTarun Kanti DebBarma
commit 672e302e3c (ARM: OMAP: use edge/level handlers from generic IRQ framework) removed retrigger support in favor of using generic IRQ framework. This patch cleans up some unused remnants of that removal. Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-12gpio/omap: remove saved_wakeup field from struct gpio_bankTarun Kanti DebBarma
There is no more need to have saved_wakeup because bank->context.wake_en already holds that value. So getting rid of read/write operation associated with this field. Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-12gpio/omap: remove suspend_wakeup field from struct gpio_bankTarun Kanti DebBarma
Since we already have bank->context.wake_en to keep track of gpios which are wakeup enabled, there is no need to have this field any more. Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-12gpio/omap: remove saved_fallingdetect, saved_risingdetectTarun Kanti DebBarma
Since we already have context.fallingdetect and context.risingdetect there is no more need to have these additional fields. Also, getting rid of extra reads associated with them. Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Cousson, Benoit <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-12gpiolib/arches: Centralise bolierplate asm/gpio.hMark Brown
Rather than requiring architectures that use gpiolib but don't have any need to define anything custom to copy an asm/gpio.h provide a Kconfig symbol which architectures must select in order to include gpio.h and for other architectures just provide the trivial implementation directly. This makes it much easier to do gpiolib updates and is also a step towards making gpiolib APIs available on every architecture. For architectures with existing boilerplate code leave a stub header in place which warns on direct inclusion of asm/gpio.h and includes linux/gpio.h to catch code that's doing this. Direct inclusion of asm/gpio.h has long been deprecated. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jonas Bonn <jonas@southpole.se> Acked-by: Tony Luck <tony.luck@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>