summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-09-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) If the local_df boolean is set on an SKB we have to allocate a unique ID even if IP_DF is set in the ipv4 headers, from Ansis Atteka. 2) Some fixups for the new chipset support that went into the sfc driver, from Ben Hutchings. 3) Because SCTP bypasses a good chunk of, and actually duplicates, the logic of the ipv6 output path, some IPSEC things don't get done properly. Integrate SCTP better into the ipv6 output path so that these problems are fixed and such issues don't get missed in the future either. From Daniel Borkmann. 4) Fix skge regressions added by the DMA mapping error return checking added in v3.10, from Mikulas Patocka. 5) Kill some more IRQF_DISABLED references, from Michael Opdenacker. 6) Fix races and deadlocks in the bridging code, from Hong Zhiguo. 7) Fix error handling in tun_set_iff(), in particular don't leak resources. From Jason Wang. 8) Prevent format-string injection into xen-netback driver, from Kees Cook. 9) Fix regression added to netpoll ARP packet handling, in particular check for the right ETH_P_ARP protocol code. From Sonic Zhang. 10) Try to deal with AMD IOMMU errors when using r8169 chips, from Francois Romieu. 11) Cure freezes due to recent changes in the rt2x00 wireless driver, from Stanislaw Gruszka. 12) Don't do SPI transfers (which can sleep) in interrupt context in cw1200 driver, from Solomon Peachy. 13) Fix LEDs handling bug in 5720 tg3 chips already handled for 5719. From Nithin Sujir. 14) Make xen_netbk_count_skb_slots() count the actual number of slots that will be used, taking into consideration packing and other issues that the transmit path will run into. From David Vrabel. 15) Use the correct maximum age when calculating the bridge message_age_timer, from Chris Healy. 16) Get rid of memory leaks in mcs7780 IRDA driver, from Alexey Khoroshilov. 17) Netfilter conntrack extensions were converted to RCU but are not always freed properly using kfree_rcu(). Fix from Michal Kubecek. 18) VF reset recovery not being done correctly in qlcnic driver, from Manish Chopra. 19) Fix inverted test in ATM nicstar driver, from Andy Shevchenko. 20) Missing workqueue destroy in cxgb4 error handling, from Wei Yang. 21) Internal switch not initialized properly in bgmac driver, from Rafał Miłecki. 22) Netlink messages report wrong local and remote addresses in IPv6 tunneling, from Ding Zhi. 23) ICMP redirects should not generate socket errors in DCCP and SCTP. We're still working out how this should be handled for RAW and UDP sockets. From Daniel Borkmann and Duan Jiong. 24) We've had several bugs wherein the network namespace's loopback device gets accessed after it is free'd, NULL it out so that we can catch these problems more readily. From Eric W Biederman. 25) Fix regression in TCP RTO calculations, from Neal Cardwell. 26) Fix too early free of xen-netback network device when VIFs still exist. From Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) netconsole: fix a deadlock with rtnl and netconsole's mutex netpoll: fix NULL pointer dereference in netpoll_cleanup skge: fix broken driver ip: generate unique IP identificator if local fragmentation is allowed ip: use ip_hdr() in __ip_make_skb() to retrieve IP header xen-netback: Don't destroy the netdev until the vif is shut down net:dccp: do not report ICMP redirects to user space cnic: Fix crash in cnic_bnx2x_service_kcq() bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions. vxlan: Avoid creating fdb entry with NULL destination tcp: fix RTO calculated from cached RTT drivers: net: phy: cicada.c: clears warning Use #include <linux/io.h> instead of <asm/io.h> net loopback: Set loopback_dev to NULL when freed batman-adv: set the TAG flag for the vid passed to BLA netfilter: nfnetlink_queue: use network skb for sequence adjustment net: sctp: rfc4443: do not report ICMP redirects to user space net: usb: cdc_ether: use usb.h macros whenever possible net: usb: cdc_ether: fix checkpatch errors and warnings net: usb: cdc_ether: Use wwan interface for Telit modules ip6_tunnels: raddr and laddr are inverted in nl msg ...
2013-09-19netconsole: fix a deadlock with rtnl and netconsole's mutexNikolay Aleksandrov
This bug was introduced by commit 7a163bfb7ce50895bbe67300ea610d31b9c09230 ("netconsole: avoid a crash with multiple sysfs writers"). In store_enabled() we have the following sequence: acquire nt->mutex then rtnl, but in the netconsole netdev notifier we have rtnl then nt->mutex effectively leading to a deadlock. The NULL pointer dereference that the above commit tries to fix is actually due to another bug in netpoll_cleanup(). This is fixed by dropping the mutex from the netdev notifier as it's already protected by rtnl. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19skge: fix broken driverMikulas Patocka
The patch 136d8f377e1575463b47840bc5f1b22d94bf8f63 broke the skge driver. Note this part of the patch: + if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { + dev_kfree_skb(nskb); + goto resubmit; + } + pci_unmap_single(skge->hw->pdev, dma_unmap_addr(e, mapaddr), dma_unmap_len(e, maplen), PCI_DMA_FROMDEVICE); skb = e->skb; prefetch(skb->data); - skge_rx_setup(skge, e, nskb, skge->rx_buf_size); The function skge_rx_setup modifies e->skb to point to the new skb. Thus, after this change, the new buffer, not the old, is returned to the networking stack. This bug is present in kernels 3.11, 3.11.1 and 3.12-rc1. The patch should be queued for 3.11-stable. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Vasiliy Glazov <vascom2@gmail.com> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19ip: generate unique IP identificator if local fragmentation is allowedAnsis Atteka
If local fragmentation is allowed, then ip_select_ident() and ip_select_ident_more() need to generate unique IDs to ensure correct defragmentation on the peer. For example, if IPsec (tunnel mode) has to encrypt large skbs that have local_df bit set, then all IP fragments that belonged to different ESP datagrams would have used the same identificator. If one of these IP fragments would get lost or reordered, then peer could possibly stitch together wrong IP fragments that did not belong to the same datagram. This would lead to a packet loss or data corruption. Signed-off-by: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-19xen-netback: Don't destroy the netdev until the vif is shut downPaul Durrant
Without this patch, if a frontend cycles through states Closing and Closed (which Windows frontends need to do) then the netdev will be destroyed and requires re-invocation of hotplug scripts to restore state before the frontend can move to Connected. Thus when udev is not in use the backend gets stuck in InitWait. With this patch, the netdev is left alone whilst the backend is still online and is only de-registered and freed just prior to destroying the vif (which is also nicely symmetrical with the netdev allocation and registration being done during probe) so no re-invocation of hotplug scripts is required. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18cnic: Fix crash in cnic_bnx2x_service_kcq()Michael Chan
commit 104a43edb264321a4d41850e98153b4fa8a9ef42 cnic: Use CHIP_NUM macros from bnx2x.h changed the code to use the bnx2x macro NO_FCOE() to determine if FCoE is supported or not. There is another place in cnic that is still using the old method to determine if FCoE is supported or not. The 2 methods may not yield the same result after the network interface is brought down and up. This will cause the crash as cnic_bnx2x_service_kcq() will access the uninitialized cp->kcq2. The fix is to consistently use the same macro CNIC_SUPPORTS_FCOE() which uses the bnx2x NO_FCOE() macro. As a follow-up, we can clean up the code to remove the old method as it is no longer needed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions.Michael Chan
commit b9871bcfd211d316adee317608dab44c58d6ea2d bnx2x: VF RSS support - PF side changed the configuration of the doorbell HW and it broke iSCSI and FCoE. We fix this by making compatible changes to the doorbell address in bnx2i and bnx2fc. For the userspace driver, we need to pass a modified CID so that the existing userspace driver will calculate the correct doorbell address and continue to work. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18vxlan: Avoid creating fdb entry with NULL destinationSridhar Samudrala
Commit afbd8bae9c798c5cdbe4439d3a50536b5438247c vxlan: add implicit fdb entry for default destination creates an implicit fdb entry for default destination. This results in an invalid fdb entry if default destination is not specified. For ex: ip link add vxlan1 type vxlan id 100 creates the following fdb entry 00:00:00:00:00:00 dev vxlan1 dst 0.0.0.0 self permanent This patch fixes this issue by creating an fdb entry only if a valid default destination is specified. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17drivers: net: phy: cicada.c: clears warning Use #include <linux/io.h> ↵Avinash Kumar
instead of <asm/io.h> clears following warnings : WARNING: Use include <linux/io.h> instead of <asm/io.h> WARNING: Use include <linux/uaccess.h> instead of <asm/uaccess.h> Signed-off-by: Avinash Kumar <avi.kp.137@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17net loopback: Set loopback_dev to NULL when freedEric W. Biederman
It has recently turned up that we have a number of long standing bugs in the network stack cleanup code with use of the loopback device after it has been freed that have not turned up because in most cases the storage allocated to the loopback device is not reused, when those accesses happen. Set looback_dev to NULL to trigger oopses instead of silent data corrupt when we hit this class of bug. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17Merge branch 'sfc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
Ben Hutchings says: ==================== Some bug fixes and future-proofing for the recently added SFC9120 support: 1. Minimal support for the 40G configuration. 2. Disable the incomplete PTP/hardware timestamping support. 3. Reset MAC stats properly after a firmware upgrade. 4. Re-check the datapath firmware capabilities after the controller is reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17net: usb: cdc_ether: use usb.h macros whenever possibleFabio Porcedda
Use USB_DEVICE_AND_INTERFACE_INFO and USB_VENDOR_AND_INTERFACE_INFO macros to reduce boilerplate. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17net: usb: cdc_ether: fix checkpatch errors and warningsFabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17net: usb: cdc_ether: Use wwan interface for Telit modulesFabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: <stable@vger.kernel.org> # 3.0+ as far back as it applies cleanly Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17bgmac: implement unaligned addressing for DMA rings that support itRafał Miłecki
This is important patch for new devices that support unaligned addressing. That devices suffer from the backward-compatibility bug in DMA engine. In theory we should be able to use old mechanism, but in practice DMA address seems to be randomly copied into status register when hardware reaches end of a ring. This breaks reading slot number from status register and we can't use DMA anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17bgmac: allow bigger et_swtype nvram variableHauke Mehrtens
Without this patch it is impossible to read et_swtype, because the 1 byte space is needed for the terminating null byte. The max expected value is 0xF, so now it should be possible to read decimal form ("15") and hex form ("0xF"). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17bgmac: fix internal switch initializationRafał Miłecki
Some devices (BCM4749, BCM5357, BCM53572) have internal switch that requires initialization. We already have code for this, but because of the typo in code it was never working. This resulted in network not working for some routers and possibility of soft-bricking them. Use correct bit for switch initialization and fix typo in the define. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-17drivers/net/ethernet/ibm/ehea/ehea_main.c: add alias entry for portN propertiesOlaf Hering
Use separate table for alias entries in the ehea module, otherwise the probe() function will operate on the separate ports instead of the lhea-"root" entry of the device-tree Addresses https://bugzilla.novell.com/show_bug.cgi?id=435215 [ Thadeu notes that: "... this issue might happen with the generation of initrd, when the scripts check for /sys/class/net/eth0/device/modalias, which links to the port device at /sys/devices/ibmebus/23c00400.lhea/port0/" ] Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Olaf Hering <ohering@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16cxgb4: remove workqueue when driver registration failsWei Yang
When driver registration fails, we need to clean up the resources allocated before. cxgb4 missed to destroy the workqueue allocated at the very beginning. This patch destroies the workqueue when registration fails. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16bonding: Make alb learning packet interval configurableNeil Horman
running bonding in ALB mode requires that learning packets be sent periodically, so that the switch knows where to send responding traffic. However, depending on switch configuration, there may not be any need to send traffic at the default rate of 3 packets per second, which represents little more than wasted data. Allow the ALB learning packet interval to be made configurable via sysfs Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Acked-by: Veaceslav Falico <vfalico@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16vxlan: Fix sparse warningsJoseph Gasparakis
This patch fixes sparse warnings when incorrectly handling the port number and using int instead of unsigned int iterating through &vn->sock_list[]. Keeping the port as __be16 also makes things clearer wrt endianess. Also, it was pointed out that vxlan_get_rx_port() had unnecessary checks which got removed. Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16qlcnic: Fix VF reset recoveryManish Chopra
o At the time of firmware hang "adapter->need_fw_reset" variable gets set but after re-initialization of firmware OR at the time of VF re-initialization that variable was not getting cleared which was leading to failure in VF reset recovery.Fix it by clearing this variable before re-initializing VF Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: ps3_gelic: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/toshiba/ps3_gelic_net.c It's a NOOP since 2.6.35 and I will remove it one day ;) Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: smsc: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from code in drivers/net/ethernet/smsc/ It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: pasemi: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/pasemi/pasemi_mac.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: natsemi: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from code in drivers/net/ethernet/natsemi/ It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: ks8851-ml: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/micrel/ks8851_mll.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: pxa168_eth: remove deprecated IRQF_DISABLEDMichael Opdenacker
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: lantiq_etop: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/lantiq_etop.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: hp100: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/hp/hp100.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-16net: fec: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/freescale/fec_main.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "These are four patches for three construction sites: - Fix register decoding for the combination of multi-core processors and multi-threading. - Two more fixes that are part of the ongoing DECstation resurrection work. One of these touches a DECstation-only network driver. - Finally Markos' trivial build fix for the AP/SP support. (With this applied now all MIPS defconfigs are building again)" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kernel: vpe: Make vpe_attrs an array of pointers. MIPS: Fix SMP core calculations when using MT support. MIPS: DECstation I/O ASIC DMA interrupt handling fix MIPS: DECstation HRT initialization rearrangement
2013-09-14tg3: Use pci_dev pm_capJon Mason
Use the already existing pm_cap variable in struct pci_dev for determining the power management offset. This saves the driver from having to keep track of an extra variable. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-14bnx2x: Use pci_dev pm_capJon Mason
Use the already existing pm_cap variable in struct pci_dev for determining the power management offset. This saves the driver from having to keep track of an extra variable. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-14alx: remove redundant D0 power state setYijing Wang
Pci_enable_device_mem() will set device power state to D0, so it's no need to do it again in alx_probe(). Also remove redundant PM Cap find code, because pci core has been saved the pci device pm cap value. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-14be2net: missing variable initializationAntonio Alecrim Jr
Signed-off-by: Antonio Alecrim Jr <antonio.alecrim@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to ixgbe and e1000e. Jacob provides a ixgbe patch to fix the configure_rx patch to properly disable RSC hardware logic when a user disables it. Previously we only disabled RSC in the queue settings, but this does not fully disable hardware RSC logic which can lead to unexpected performance issues. Emil provides three fixes for ixgbe. First fixes the ethtool loopback test when DCB is enabled, where the frames may be modified on Tx (by adding VLAN tag) which will fail the check on receive. Then a fix for QSFP+ modules, limit the speed setting to advertise only one speed at a time since the QSFP+ modules do not support auto negotiation. Lastly, resolve an issue where the driver will display incorrect info for QSFP+ modules that were inserted after the driver has been loaded. David Ertman provides to fixes for e1000e, one removes a comparison to the boolean value true where evaluating the lvalue will produce the same result. The other fixes an error in the calculation of the rar_entry_count, which causes a write of unkown/undefined register space in the MAC to unknown/undefined register space in the PHY. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13e1000e: fix overrun of PHY RAR arrayDavid Ertman
When copying the MAC RAR registers to PHY there is an error in the calculation of the rar_entry_count, which causes a write of unknown/ undefined register space in the MAC to unknown/undefined register space in the PHY. This patch fixes the overrun with writing to the PHY RAR and also fixes the ethtool offline register tests so that the correctly addressed registers have the appropriate bitmasks for R/W and RO bits for affected parts. Shawn Rader gets credit for finding and fixing the register overrun. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> CC: Shawn Rader <shawn.t.rader@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-13e1000e: cleanup boolean comparison to trueDavid Ertman
Removing a comparison to the boolean value true where simply interrogating the lvalue will produce the same result. Signed-off-by: David Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-13ixgbe: fix ethtool reporting of supported links for SFP modulesEmil Tantilov
This patch resolves an issue where the driver will display incorrect info for Q/SFP+ modules that were inserted after the driver has been loaded. This patch adds a call to identify_phy() in ixgbe_get_settings() prior to calling get_link_capabilities() which needs the PHY data in order to determine the correct settings. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-13ixgbe: limit setting speed to only one at a time for QSFP modulesEmil Tantilov
QSFP+ modules do not support auto negotiation and should advertise only one speed at a time. This patch adds logic in ethtool to allow setting and reporting the advertised speed at either 1Gbps or 10Gbps, but not both. Also limits the speed set in ixgbe_sfp_link_config_subtask() to highest supported. Previously the link was set to whatever the supported speeds were. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-13ixgbe: fix ethtool loopback diagnostic with DCB enabledEmil Tantilov
This patch disables DCB prior to running the loopback test. When DCB is enabled the frames may be modified on Tx (by adding vlan tag) which will fail the check on Rx. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-13ixgbe: fully disable hardware RSC logic when disabling RSCJacob Keller
This patch modifies the configure_rx path in order to properly disable RSC hardware logic when the user disables it. Previously we only disabled RSC in the queue settings, but this does not fully disable hardware RSC logic which can lead to some unexpected performance issues. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13MIPS: DECstation I/O ASIC DMA interrupt handling fixMaciej W. Rozycki
This change complements commit d0da7c002f7b2a93582187a9e3f73891a01d8ee4 and brings clear_ioasic_irq back, renaming it to clear_ioasic_dma_irq at the same time, to make I/O ASIC DMA interrupts functional. Unlike ordinary I/O ASIC interrupts DMA interrupts need to be deasserted by software by writing 0 to the respective bit in I/O ASIC's System Interrupt Register (SIR), similarly to how CP0.Cause.IP0 and CP0.Cause.IP1 bits are handled in the CPU (the difference is SIR DMA interrupt bits are R/W0C so there's no need for an RMW cycle). Otherwise the handler is reentered over and over again. The only current user is the DEC LANCE Ethernet driver and its extremely uncommon DMA memory error handler that does not care when exactly the interrupt is cleared. Anticipating the use of DMA interrupts by the Zilog SCC driver this change however exports clear_ioasic_dma_irq for device drivers to choose the right application-specific sequence to clear the request explicitly rather than calling it implicitly in the .irq_eoi handler of `struct irq_chip'. Previously these interrupts were cleared in the .end handler of the said structure, before it was removed. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5826/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-13net/irda/mcs7780: fix memory leaks in mcs_net_open()Alexey Khoroshilov
If rx_urb allocation fails in mcs_setup_urbs(), tx_urb leaks. If mcs_receive_start() fails in mcs_net_open(), the both urbs are not deallocated. The patch fixes the issues and by the way fixes label indentation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13net/mlx4_en: Check device state when setting coalescingEugenia Emantayev
When the device is down, CQs are freed. We must check the device state to avoid issuing firmware commands on non existing CQs. CC: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13net: tulip: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/dec/tulip/de4x5.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13ethernet: amd: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/amd/sun3lance.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13ehea: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/ethernet/ibm/ehea/ehea_main.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>