summaryrefslogtreecommitdiff
path: root/drivers/scsi/mpt2sas
AgeCommit message (Collapse)Author
2011-07-26[SCSI] mpt2sas: WarpDrive Infinite command retries due to wrong scsi command ↵Kashyap, Desai
entry in MPI message Issue: This issue is seen on LSI H/W WarpDrive SSS6200 When filed direct I/O is tried as volume I/O the scmd field in internal lookup table get cleared and because of that the retried volume I/O never gets reported as completed to SML. Result: I/O timeout and Error handling thread will kicking off Fix: Setting back the scmd in the lookup table before retrying the failed direct i/o Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] mpt2sas: Bump version 09.100.00.00Kashyap, Desai
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] mpt2sas: Adding support for customer specific brandingKashyap, Desai
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] mpt2sas: Added DID_NO_CONNECT return when driver remove and avoid ↵Kashyap, Desai
shutdown call Driver should not call shutdown call from _scsih_remove otherwise, The scsi midlayer can be deadlocked when devices are removed from the driver pci_driver->shutdown handler. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] mpt2sas: fix broadcast AEN and task management issueKashyap, Desai
Properly handling of target reset in multi-initiator environment Clean up in broadcast change handling: (1) Need to look at the status of each task management request, and retry the TM when there are failures. (2) Need quiescence IO so the driver doesn't take on more IO request while it's in the middle of sending TM request to firmware (3) Add support to keep track of how many pending broadcast AEN events are received while the broadcast handling is active, then loop back at the end of this routine if there were any events received. Clean up in mpt2sas_scsih_issue_tm routine: (1) Make sure proper status is returned when host reset fails (2) Clean up sanity checks near end of routine, insuring all outstanding IOs were completed. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] mpt2sas: Set max_sector count from module parameterKashyap, Desai
This feature is to override the default max_sectors setting at load time, taking max_sectors as an command line option when loading the driver. The setting is currently hard-coded in the driver to 8192 sectors (4MB transfers). If max_sectors is specified at load time, minimum specified setting will be 64, and the maximum is 8192. The driver will modify the setting to be on even boundary. If max_sectors is not specified, the driver will default to 8192. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] mpt2sas MPI next revision header updateKashyap, Desai
mpt2sas driver revision q header update: (1) Modified the descriptions of the LocalAddress bit in the Flags field of the MPI SGE Format description and the MPI Simple Element. (2) Modified Data Location Address Space bits in the Flags field of the IEEE Chain Element. (3) Added more detail to the description of the DataLength field for the SCSI IO Request and Target Assist Request. Removed restriction on using chained SGLs when using multicast or bidirectional support. (4) In Manufacturing Page 7, added ReceptacleID field to ConnectorInfo, and reworked how the Pinout field is used. (5) In IO Unit Page 7, added BoardTemperature and BoardTemperatureUnits fields. (6) In IOC Page 1, changed CoalescingTimeout to units of half-microsecond and updated descriptions. (7) Modified descriptions of SATASlumberTimeout and SASSlumberTimeout fields in SAS IO Unit Page 5 to indicate the timers start after partial mode is entered. (8) Added Extended Manufacturing configuration pages. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] mpt2sas: Fixed Big Indian Issues on 32 bit PPCKashyap, Desai
This patch addresses many endian issues solved by runing sparse with the option __CHECK_ENDIAN__ turned on. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-24[SCSI] mpt2sas: Fix missing reference tag seed with Type 2 devicesMartin K. Petersen
Ensure that the initial reference tag is passed on to the HBA firmware for DIF Type 2 devices. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Kashyap Desai <Kashyap.Desai@lsi.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24[SCSI] mpt2sas: Driver version upgrade 08.100.00.02Kashyap, Desai
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24[SCSI] mpt2sas: move even handling of MPT2SAS_TURN_ON_FAULT_LED into process ↵Kashyap, Desai
context Driver was a sending a SEP request during interrupt context which required to go to sleep. The fix is to rearrange the code so a fake event MPT2SAS_TURN_ON_FAULT_LED is fired from interrupt context, then later during the kernel worker threads processing, the SEP request is issued to firmware. Cc: stable@kernel.org Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (110 commits) [SCSI] qla2xxx: Refactor call to qla2xxx_read_sfp for thermal temperature. [SCSI] qla2xxx: Unify the read/write sfp mailbox command routines. [SCSI] qla2xxx: Clear complete initialization control block. [SCSI] qla2xxx: Allow an override of the registered maximum LUN. [SCSI] qla2xxx: Add host number in reset and quiescent message logs. [SCSI] qla2xxx: Correctly read sfp single byte mailbox register. [SCSI] qla2xxx: Add qla82xx_rom_unlock() function. [SCSI] qla2xxx: Log if qla82xx firmware fails to load from flash. [SCSI] qla2xxx: Use passed in host to initialize local scsi_qla_host in queuecommand function [SCSI] qla2xxx: Correct buffer start in edc sysfs debug print. [SCSI] qla2xxx: Update firmware version after flash update for ISP82xx. [SCSI] qla2xxx: Fix hang during driver unload when vport is active. [SCSI] qla2xxx: Properly set the dsd_list_len for dsd_chaining in cmd type 6. [SCSI] qla2xxx: Fix virtual port failing to login after chip reset. [SCSI] qla2xxx: Fix vport delete hang when logins are outstanding. [SCSI] hpsa: Change memset using sizeof(ptr) to sizeof(*ptr) [SCSI] ipr: Rate limit DMA mapping errors [SCSI] hpsa: add P2000 to list of shared SAS devices [SCSI] hpsa: do not attempt PCI power management reset method if we know it won't work. [SCSI] hpsa: remove superfluous sleeps around reset code ...
2011-05-01[SCSI] mpt2sas : WarpDrive New product SSS6200 support addedKashyap, Desai
This patch has Support for the new solid state device product SSS6200 from LSI and relavent features w.r.t SSS6200. The major feature added in this driver is supporting Direct-I/O to the SSS6200 storage.There are some additional changes done to avoid exposing the RAID member disks to the OS and hiding/exposing drives based on the OEM Specific Flag in Manufacturing Page10 (this is required to handle specific changes in the SSS6200 firmware). Each and every changes are listed below. 1. Hiding IR related messages. For SSS6200, the driver is modified not to print IR related events. Even if the debugging is enabled the IR related messages will not be displayed. In some places if there is a need to display a message related to IR the string "IR" is replaced with string "DD" and the string "volume" is replaced with "direct drive". But the function names are not changed hence there are some places where the reference to volume can be seen if debug level is set. 2. Removed RAID transport support In Linux the user can retrieve RAID volume information from the sysfs directory. This support is removed for SSS6200. 3. Direct I/O support. The driver tries to enable direct I/O when a volume is reported to the driver by the firmware through IRCC events and the driver does this just before reporting to the OS, hence all the OS issued I/O can go through direct path if they can, The first validation is to see whether the manufacturing page10 flag is set to expose all drives always. If that is set, the driver will not enable direct I/O and displays the message "DDIO" is disabled globally as drives are exposed. The driver checks whether there is more than one volume in the controller, if so the direct I/O will be disabled globally for all volumes in the controller and the message displayed will be "DDIO is disabled globally as number of drives > 1. If retrieving number of PD is failed the driver will not enable direct I/O and displays the message Failure in computing number of drives DDIO disabled. If memory allocation for RAIDVolumePage0 is failed, the driver will not enable direct I/O and displays the message Memory allocation failure for RVPG0 DDIO disabled. If retrieving RAIDVolumePage0 is failed the driver will not enable direct I/O and displays the message Failure in retrieving RVPG0 DDIO disabled If the number of PD in a volume is greater than 8, then the direct I/O will be disabled. If any of individual drives handle retrieval is failed then the DD-IO will be disabled. If the volume is not RAID0 or if the block size is not 512 then the DD-IO will be disabled. If the volume size is greater than 2TB then the DD-IO will be disabled. If the driver is not able to find a valid stripe exponent using the configured stripe size then the DD-IO will be disabled When the DD-IO is enabled the driver will check every I/O request issued to the storage and checks whether the request is either READ6/WRITE6/READ10/WRITE10, if it is and if the complete I/O transfer is within a stripe size then the I/O is redirected to the drive directly instead of the volume. On completion of every I/O, if the completion is failure means if the reply is address reply with a reply frame associated with it, then the type of I/O will be checked, if the I/O is direct then the I/O will be retried to the volume once. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Reviewed-by: Eric Moore <eric.moore@lsi.com> Reviewed-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01[SCSI] mpt2sas: do not check serial_number in the abort handlerChristoph Hellwig
The SCSI midlayer stops all command processing when in error handling, which means there is no chance for command reuse when the abort handler is called. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: "Moore, Eric" <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-04-24[SCSI] mpt2sas: prevent heap overflows and unchecked readsDan Rosenberg
At two points in handling device ioctls via /dev/mpt2ctl, user-supplied length values are used to copy data from userspace into heap buffers without bounds checking, allowing controllable heap corruption and subsequently privilege escalation. Additionally, user-supplied values are used to determine the size of a copy_to_user() as well as the offset into the buffer to be read, with no bounds checking, allowing users to read arbitrary kernel memory. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: stable@kernel.org Acked-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23[SCSI] mpt2sas : Added customer specific display supportKashyap, Desai
Added Vendor specific branding message support. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits) [SCSI] scsi_dh_rdac: Add MD36xxf into device list [SCSI] scsi_debug: add consecutive medium errors [SCSI] libsas: fix ata list corruption issue [SCSI] hpsa: export resettable host attribute [SCSI] hpsa: move device attributes to avoid forward declarations [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26) [SCSI] sd: Logical Block Provisioning update [SCSI] Include protection operation in SCSI command trace [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try) [SCSI] target: Fix volume size misreporting for volumes > 2TB [SCSI] bnx2fc: Broadcom FCoE offload driver [SCSI] fcoe: fix broken fcoe interface reset [SCSI] fcoe: precedence bug in fcoe_filter_frames() [SCSI] libfcoe: Remove stale fcoe-netdev entries [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out" [SCSI] libfc: Fixing a memory leak when destroying an interface [SCSI] megaraid_sas: Version and Changelog update ... Fix up trivial conflicts due to whitespace differences in drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-02-12[SCSI] remove flush_scheduled_work() usagesTejun Heo
Simple conversions to drop flush_scheduled_work() usages in drivers/scsi. More involved ones will be done in separate patches. * NCR5380, megaraid_sas: cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync(). * mpt2sas_scsih: drop unnecessary flush_scheduled_work(). * arcmsr_hba, ipr, pmcraid: flush the used work explicitly instead of using flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: Bump version 08.100.00.00Kashyap, Desai
Upgrade driver version from 7.100.00.00 to 8.100.00.00 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: Basic Code Cleanup in mpt2sas_baseKashyap, Desai
Basic Code Cleanup: (1) _base_get_cb_idx and mpt2sas_base_free_smid were reorganized in similar fashion so the order of obtaining the cbx and smid are scsiio, hi_priority, and internal. (2) The hi_priority and internal request queue struct was made smaller by removing the scmd and chain_tracker, thus saving memory allocation. (3) For scsiio request, a new structure was created having the same elements from the former request tracker struct. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: Add support for Customer specific branding messagesKashyap, Desai
Add support for Customer specific branding messages when device driver loads, based on specific customer subsystem vendor and device Ids Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: Revision P MPI Header UpdateKashyap, Desai
Revision P MPI Header Update: a) Added enable/disable SATA NCQ operations to SAS IO Unit Control Request. b) Modified Host Based Discovery Action Request message format. c) Removed Device Path bit from IO Unit Page 1 Flags field. d) Added description of ChainOffset field for Diagnostic Data Upload Tool.Chaining is not allowed. Removed mpi2_history.txt file Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: fix Integrated Raid unsynced on shutdown problemKashyap, Desai
Issue: IR shutdown(sending) and IR shutdown(complete) messages not listed in /var/log/messages when driver is removed. The driver needs to issue a MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED request when the driver is unloaded so the IR metadata journal is updated. If this request is not sent, then the volume would need a "check consistency" issued on the next bootup if the volume was roamed from one initiator to another. The current driver supports this feature only when the system is rebooted, however this also need to be supported if the driver is unloaded Fix: To fix this issue, the driver is going to need to call the _scsih_ir_shutdown prior to reporting the volumes missing from the OS, hence the device handles are still present. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: Kernel Panic during Large Topology discovery Kashyap, Desai
There was a configuration page timing out during the initial port enable at driver load time. The port enable would fail, and this would result in the driver unloading itself, meanwhile the driver was accessing freed memory in another context resulting in the panic. The fix is to prevent access to freed memory once the driver had issued the diag reset which woke up the sleeping port enable process. The routine _base_reset_handler was reorganized so the last sleeping process woken up was the port_enable. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: Fix the race between broadcast asyn event and scsi command ↵Kashyap, Desai
completion False timeout after hard resets, there were two issues which leads to timeout. (1) Panic because of invalid memory access in the broadcast asyn event processing routine due to a race between accessing the scsi command pointer from broadcast asyn event processing thread and completing the same scsi command from the interrupt context. (2) Broadcast asyn event notifcations are not handled due to events ignored while the broadcast asyn event is activity being processed from the event process kernel thread. In addition, changed the ABRT_TASK_SET to ABORT_TASK in the broadcast async event processing routine. This is less disruptive to other request that generate Broadcast Asyn Primitives besides target reset. e.g clear reservations, microcode download,and mode select. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: Correct resizing calculation for max_queue_depthKashyap, Desai
The ioc->hba_queue_depth is not properly resized when the controller firmware reports that it supports more outstanding IO than what can be fit inside the reply descriptor pool depth. This is reproduced by setting the controller global credits larger than 30,000. The bug results in an incorrect sizing of the queues. The fix is to resize the queue_size by dividing queue_diff by two. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: fix internal device reset for older firmware prior to MPI Rev KKashyap, Desai
The "internal device reset complete" event is not supported for older firmware prior to MPI Rev K We added a check in the driver so the "internal device reset" event is ignored for older firmware. When ignored, the tm_busy flag doesn't get set nor cleared. Without this fix, IO queues would be froozen indefinetly after the "internal device reset" event, as the "complete" event never sent to clear the flag. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24[SCSI] mpt2sas: Fix device removal handshake for zoned devicesKashyap, Desai
When zoning end devices, the driver is not sending device removal handshake alogrithm to firmware. This results in controller firmware not sending sas topology add events the next time the device is added. The fix is the driver should be doing the device removal handshake even though the PHYSTATUS_VACANT bit is set in the PhyStatus of the event data. The current design is avoiding the handshake when the VACANT bit is set in the phy status. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Bump version 07.100.00.00Kashyap, Desai
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Debug string changes from target to device.Kashyap, Desai
Changing debug print to correct string. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Sanity check for phy count is added using max phy countKashyap, Desai
Fix oops loading driver when there is direct attached SEP device The driver set max phys count to the value reported in sas iounit page zero. However this page doesn't take into account additional virutal phys. When sas topology event arrives, the phy count is larger than expected, and the driver accesses memory array beyond the end of allocated space, then oops. Manufacturing page 8 contains the info on direct attached phys. For this fix will making sure that sas topology event is not processing phys greater than the expected phy count. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: change queue depth with reason argument more appropriatelyKashyap, Desai
change_queue_depth callback API changed The change_queue_depth callback changed where there is now an additional parameter called reason, with SCSI_QDEPTH_DEFAULT, SCSI_QDEPTH_QFULL, and SCSI_QDEPTH_RAMP_UP codes. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Remove code for TASK_SET_FULL from driver.Kashyap, Desai
remove support for MPI2_EVENT_TASK_SET_FULL This event is obsoleted, so this processing of this event needs to be removed from the driver. The controller firmware is going to handle TASK_SET_FULL, the driver doesn't need to do anything. Even though we are removing the EVENT handling, the behavour has not changed between driver versions becuase fimrware will still be handling queue throttling, and retrying of commands when the target device queues are full. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: MPI 2.0 Header updatedKashyap, Desai
MPI2 Rev header files. 1) Removed Task Set Full Event. Modified description of Disable SCSI Initiator Task Set Full Handling bit in the Flags field of IO Unit Page 1. Modified the descriptions for the three queue depth fields in SAS IO Unit Page 1. (2) Added new value for the Current Operation bits of the Flags field in the RAID Volume Indicator Structure to indicate that the Make Data Consistent operation is running. (3) Added a value of 0x6 to various SAS link rate fields to indicate an attached PHY that is not using any commonly supported settings. (4) Added Volume Not Consistent bit to the VolumeStatusFlags field of RAID Volume Page 0. (5) Added a new value for the IncompatibleReason field of RAID Physical Disk Page 0 to indicate an incompatible media type. (6) Added Diagnostic Data Upload tool for the Toolbox Request. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Modify code to support Expander switchKashyap, Desai
Issue : Switch swap doesn't work when device missing delay is enabled. (1) add support to individually add and remove phys to and from existing ports. This replaces the routine _transport_delete_duplicate_port. (2) _scsih_sas_host_refresh - was modified to change the link rate from zero to 1.5 GB rate when the firmware reports there is an attached device with zero link. (3) add new function mpt2sas_device_remove, this is wrapper function deletes some redundant code through out driver by combining into one subrountine (4) two subroutines were modified so the sas_device, raid_device, and port lists are traversed once when objects are deleted from the list. Previously it was looping back each time an object was deleted from the list. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Create a pool of chain buffer instead of dedicated per IOsKashyap, Desai
Create a pool of chain buffers, instead of dedicated per IO: This enahancment is to address memory allocation failure when asking for more than 2300 IOs per host. There is just not enough contiquious DMA physical memory to make one single allocation to hold both message frames and chain buffers when asking for more than 2300 request. In order to address this problem we will have to allocate memory for each chain buffer in a seperate individual memory allocation, placing each chain element of 128 bytes onto a pool of available chains, which can be shared amoung all request. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Added loadtime para for IOMissingDelay and DMDKashyap, Desai
Ability to override/set the ReportDeviceMissingDelay and IODeviceMissingDelay from driver: Add new command line option missing_delay, this is an array, where the first element is the device missing delay, and the second element is io missing delay. The driver will program sas iounit page 1 with the new setting when the driver loads. This is programmed to the current and persistent configuration page so this takes immediately, as will be sticky across host reboots. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Added sanity check for cb_idx and smid access.Kashyap, Desai
Sometime it is seen that controller firmware returns an invalid system message id (smid). the oops is occurring becuase mpt_callbacks pointer is referenced to either null or invalid virtual address. this is due to cb_idx set incorrectly from routine _base_get_cb_idx. the cb_idx was set incorrectly becuase there is no check to make sure smid is less than maxiumum anticapted smid. to fix this issue, we add a check in _base_get_cb_idx to make sure smid is not greater than ioc->hba_queue_depth. in addition, a similar check was added to make sure the reply address was less than the largest anticapated address. Newer firmware has sovled this issue, however it good to have this sanity check. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] mpt2sas: Removed compiler warnnings when logging is disabledKashyap, Desai
The compiler throws warning messages while compiling without CONFIG_SCSI_MPT2SAS_LOGGING. Set proper ifdef for CONFIG_SCSI_MPT2SAS_LOGGING to avoid warnnings. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-11-16SCSI host lock push-downJeff Garzik
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits) [SCSI] be2iscsi: SGE Len == 64K [SCSI] be2iscsi: Remove premature free of cid [SCSI] be2iscsi: More time for FW [SCSI] libsas: fix bug for vacant phy [SCSI] sd: Fix overflow with big physical blocks [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer [SCSI] libsas: Don't issue commands to devices that have been hot-removed [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17 [SCSI] lpfc 8.3.17: Replace function reset methodology [SCSI] lpfc 8.3.17: SCSI fixes [SCSI] lpfc 8.3.17: BSG fixes [SCSI] lpfc 8.3.17: SLI Additions and Fixes [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces [SCSI] ipr: fix array error logging [SCSI] aha152x: enable PCMCIA on 64bit [SCSI] scsi_dh_alua: Handle all states correctly [SCSI] cxgb4i: connection and ddp setting update [SCSI] cxgb3i: fixed connection over vlan ...
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-09-15scsi: autoconvert trivial BKL users to private mutexArnd Bergmann
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>
2010-09-05[SCSI] drivers/scsi: Adjust confusing if indentationJulia Lawall
Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-07-27[SCSI] mpt2sas: driver fails to recover from injected PCIe bus errorsEric Moore
fixes surrounding PCIe enhanced error handling: (1) We need to reject all request generated internaly inside the driver as well as request arriving from the scsi mid layer when PCIe EEH is active. The fix is to add a per adapter flag called pci_error_recovery which is checked thru out the driver when request are generated. (2) We don't need to call the pci_driver->remove directly from the PCIe callbacks becuase its already called from the PCIe EEH code. In its place we are shutting down the watchdog timer, and flushing back all pending IO. (3) We need to save and restore the pci state across PCIe EEH handling. Signed-off-by: Eric Moore <eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] mpt2sas: Bump version 06.100.00.00Kashyap, Desai
Version upgrade patch Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] mpt2sas: Copy message frame before releasing to free pool to have a ↵Kashyap, Desai
local reference. Current driver is not clearing the per device tm_busy flag following the Task Mangement request completion from the IOCTL path. When this flag is set, the IO queues are frozen. The reason the flag didn't get cleared is becuase the driver is referencing memory associated to the mpi request following the completion, when the memory had been reallocated for a new request. When the memory was reallocated, the driver didn't clear the flag becuase it was expecting a task managment reqeust, and the reallocated request was for SCSI_IO. To fix the problem the driver needs to have a cached backup copy of the original reqeust. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>