summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2010-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla1280: retain firmware for error recovery [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init [SCSI] advansys: fix regression with request_firmware change [SCSI] qla2xxx: Updated version number to 8.03.02-k2. [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset. [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432. [SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time. [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing. [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs. [SCSI] scsi_transport_fc: Make sure commands are completed when rport is offline [SCSI] libiscsi: Fix recovery slowdown regression
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-27[SCSI] qla1280: retain firmware for error recoveryMichael Reed
The qla1280 driver acquires its firmware via udev. During boot the firmware is located in the initrd. If, after root is mounted, the adapter needs to reload firmware (host reset), the firmware load may fail if the root device is on the adapter being reset. This patch modifies qla1280 to retain the firmware loaded via the initial request_firmware() for use during error recovery. [jejb: fix up checkpatch issues] Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] advansys: fix regression with request_firmware changeHerton Ronaldo Krzesinski
On newer kernels users of advansys module are reporting system hang when trying to load it without firmware files present. After looking closely at description on https://qa.mandriva.com/show_bug.cgi?id=53220, I think this is related to commit "[SCSI] advansys: use request_firmware". The problem is that after switch to request_firmware, asc_dvc->err_code isn't being set when firmware files aren't found or loading fails. err_code is used by the driver to judge if there was a fatal error or not, as can be seen for example on advansys_board_found, which will only return -ENODEV when err_code is set. Because err_code isn't being set when request_firmware fails, this is a change of behaviour of the code before request_firmware addition, making it continue to load and it fails later as the firmware wasn't really loaded. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] qla2xxx: Updated version number to 8.03.02-k2.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset.Santosh Vernekar
The fix prevents application path from sending get-firmware-state mbx command during as isp reset. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432.Ben Hutchings
On specific platforms, MSI is unreliable on some of the QLA24xx chips, resulting in fatal I/O errors under load, as reported in <http://bugs.debian.org/572322> and by some RHEL customers. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not ↵Michael Hernandez
enabled at the same time. The logic is changed to detect this condition based on following 1) both module parameters are off (ql2xmaxqueues and ql2xmultique_tag). 2) both module parameters are on (ql2xmaxqueues and ql2xmultique_tag). 3) The HBA does not support multi queue. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing.Andrew Vasquez
Checks should only be done for NPIV-capable ISPs. Original code could result in PORT_UPDATEs being missed on non-NPIV-capable ISPs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs.Santosh Vernekar
We now enable/disable "Additional Receive Credits" in f/w based on nvram parameter "Extended_BB_Credits" bit (i.e. Enhanced-Features: at offset 0x196). This is applicable only for GEN2 CNAs. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] scsi_transport_fc: Make sure commands are completed when rport is offlineSarang Radke
blk_end_request doesn't complete a bidi request successfully The unfinished request eventually triggers a panic in timeout handling routine fc_bsg_job_timeout as req->special is NULL Use blk_end_request_all to end the request unconditionally Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27[SCSI] libiscsi: Fix recovery slowdown regressionMike Christie
We could be failing/stopping a connection due to libiscsi starting recovery/cleanup, but the xmit path or scsi eh thread path could be dropping the connection at the same time. As a result the session->state gets set to failed instead of in recovery. We end up not blocking the session and so the replacement timeout never gets started and we only end up failing the IO when scsi_softirq_done sees that the cmd has been running for (cmd->allowed + 1) * rq->timeout secs. We used to fail the IO right away so users are seeing a long delay when using dm-multipath. This problem was added in 2.6.28. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits) [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport [SCSI] bfa: Update the driver version to 2.1.2.1. [SCSI] bfa: Remove unused header files and did some cleanup. [SCSI] bfa: Handle SCSI IO underrun case. [SCSI] bfa: FCS and include file changes. [SCSI] bfa: Modified the portstats get/clear logic [SCSI] bfa: Replace bfa_get_attr() with specific APIs [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO). [SCSI] bfa: Rename pport to fcport in BFA FCS. [SCSI] bfa: IOC fixes, check for IOC down condition. [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state. [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt. [SCSI] bfa: IOC recovery fix in fcmode. [SCSI] bfa: AEN and byte alignment fixes. [SCSI] bfa: Introduce a link notification state machine. [SCSI] bfa: Added firmware save clear feature for BFA driver. [SCSI] bfa: FCS authentication related changes. [SCSI] bfa: PCI VPD, FIP and include file changes. [SCSI] bfa: Fix to copy fpma MAC when requested by user space application. [SCSI] bfa: RPORT state machine: direct attach mode fix. ...
2010-03-15pcmcia: add important if statementDan Carpenter
There was a problem introduced in Jul 2008 by: 0e6f9d270840 pcmcia: use pcmcia_loop_config in scsi pcmcia drivers Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Add very basic XVR-1000 framebuffer driver. qlogicpti: Remove slash in QlogicPTI irq name
2010-03-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12drivers/scsi/ses.c: eliminate double freeJulia Lawall
The few lines below the kfree of hdr_buf may go to the label err_free which will also free hdr_buf. The most straightforward solution seems to be to just move the kfree of hdr_buf after these gotos. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier E; expression E1; iterator I; statement S; @@ *kfree(E); ... when != E = E1 when != I(E,...) S when != &E *kfree(E); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-08qlogicpti: Remove slash in QlogicPTI irq nameMeelis Roos
qlogicpti driver registers its irq with a name containing slash. This results in [ 71.049735] WARNING: at fs/proc/generic.c:316 __xlate_proc_name+0xa8/0xb8() [ 71.132815] name 'Qlogic/PTI' because proc_mkdir with the name of the irq fails. Fix it by just removing the slash from irq name. Discovered and tested on real hardware (Sun Ultra 1). Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08[SCSI] scsi_transport_fc: Fix synchronization issue while deleting vportGal Rosen
The issue occur while deleting 60 virtual ports through the sys interface /sys/class/fc_vports/vport-X/vport_delete. It happen while in a mistake each request sent twice for the same vport. This interface is asynchronous, entering the delete request into a work queue, allowing more than one request to enter to the delete work queue. The result is a NULL pointer. The first request already delete the vport, while the second request got a pointer to the vport before the device destroyed. Re-create vport later cause system freeze. Solution: Check vport flags before entering the request to the work queue. [jejb: fixed int<->long problem on spinlock flags variable] Signed-off-by: Gal Rosen <galr@storwize.com> Acked-by: James Smart <james.smart@emulex.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-08platform-drivers: move probe to .devinit.text in drivers/scsiUwe Kleine-König
A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Cc: Henrik Kretzschmar <henne@nachtwindheim.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: peter fuerst <post@pfrst.de> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07[SCSI] bfa: Update the driver version to 2.1.2.1.Krishna Gudipati
Upgrade the upstream driver from 2.0.0.0 to 2.1.2.1. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Remove unused header files and did some cleanup.Krishna Gudipati
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Handle SCSI IO underrun case.Krishna Gudipati
When IO is completed with underrun and with good SCSI status, check if the transferred bytes against scsi_cmnd->underflow, which is set to minimum number of bytes that must be transferred for this command, if is less than required minimum, complete the IO with DID_ERROR. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: FCS and include file changes.Krishna Gudipati
MS module did not invoke fdmi offline in all cases, call fdmi offline when ms module receives a port offline, so that fdmi offline is from one place in the ms module. Make changes to handle 10G speed in the conversion routine. Replaced the usage of bfa_adapter_attr_s struct with specific API's. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Modified the portstats get/clear logicKrishna Gudipati
Modified the portstats get/clear logic for port physical/FCoE/QoS stats. Added more stats to FC Fixed some issues with FCoE stats collection. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Replace bfa_get_attr() with specific APIsKrishna Gudipati
bfa_ioc_attr_s is a big structure and some times could cause stack overflow if defined locally, so add specific APIs that are needed to replace the use of ioc_attr local var. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO).Krishna Gudipati
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Rename pport to fcport in BFA FCS.Krishna Gudipati
Rename pport structures to fcport in BFA FCS, to resolve confusion about the port structures in the firmware, and make sure the SG page is setup correctly. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: IOC fixes, check for IOC down condition.Krishna Gudipati
Currently BFA was not checking for IOC down condition when issuing getstats/clearstats Add check to see if IOC is operational, before issuing getstats/clearstats. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are ↵Krishna Gudipati
in FW mismatch state. Use dummy interrupt handlers till chip initialization is complete. Install real interrupt handlers after chip initialization. Also removed msix installation code in bfa_iocfc_init(). Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt.Krishna Gudipati
Fixed the issue of not acknowledging the command queue full-to-non-full interrupt. Implemented separate acknowledging functions for different ASIC and interrupt mode. Fixed the case of missing CPE interrupt by always processing the pending requests in the completion path. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: IOC recovery fix in fcmode.Krishna Gudipati
ioc_recover failed to work in fcmode. Fixed the code to initialize the ioc_regs.err_set during the notify_hbfail. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: AEN and byte alignment fixes.Krishna Gudipati
Replace enum types with int and rearrange the fields to fix some alignment issue. Local var ioc_attr is causing the stack to overflow, so removed the usage of the local ioc_attr var and now invoking an API to return the ioc_type. Fix some AEN issues. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Introduce a link notification state machine.Krishna Gudipati
Introduce a link notification state machine to handle next incoming link events while the current event is being delivered to the driver. When the event has been processed by the driver, the link notification state machine will queue the next event (if there is any) to the driver. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Added firmware save clear feature for BFA driver.Krishna Gudipati
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: FCS authentication related changes.Krishna Gudipati
Made FCS authentication related changes to state machines and header files. Made changes in FCS state machines to handle the case when secret string is NULL. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: PCI VPD, FIP and include file changes.Krishna Gudipati
Changed PCI VPD to incorporate specific OEM vendors. Added FCoE specific interrupt latency and delay params. Added some variables needed by FIP 2.0. Added some new logging and tracing definitions. Added reserved members to make the structures (IOC, IOCFC) 64bit aligned. Changed the module identifiers, as some files were moved. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Fix to copy fpma MAC when requested by user space application.Krishna Gudipati
Copy fpma MAC when requested by user space application. Added FPMA mac address to the lport attributes structure. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: RPORT state machine: direct attach mode fix.Krishna Gudipati
Make sure that in direct attach mode, we do not query the name server after a target is marked offline. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Replace bfa_assert() with bfa_sm_fault()Krishna Gudipati
Replace bfa_assert() with bfa_sm_fault() to get unhandled events for debugging. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: Clear LL_HALT and PSS_ERR bit when IOC crashes.Krishna Gudipati
Clear LL_HALT and PSS_ERR bit in the interrupt status register on an IOC crash. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-07[SCSI] bfa: IOC changes: Support faster recovery and split bfa_ioc.c into ↵Krishna Gudipati
ASIC specific code. Add support for faster IOC recovery after failure. Split bfa_ioc.c into three files: bfa_ioc.c: Common code shared between crossbow and catapult ASIC's. bfa_ioc_cb.c: Code specific to the crossbow, reg mapping and interrupt related routines. bfa_ioc_ct.c: Code specific to the catapult, reg mapping and interrupt related routines. Fix to make sure IOC reinitialize's properly on enable request - update the ioc_fwstate reg with BFI_IOC_FAIL on ioc disable mbox cmd timeout. Makefile changes to support the 2 newly added files bfa_ioc_cb.c and bfa_ioc_ct.c. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04[SCSI] bfa: Resume BFA operations after firmware mismatch is resolved.Krishna Gudipati
bfad.c & bfad_drv.h: * Created a kernel thread from pci_probe that does the bfad start operations after BFA init done on a firmware mismatch. * The kernel thread on a fw mismatch waits for an event from IOC call back and is woken up from bfa_cb_init() on BFA init success. * In normal cases of no firmware mismatch this thread is terminated in pci_probe. bfa_fcs_lport.c, fabric.c, fcs_lport.h & vport.c: * Split the lport init to attach time and init time code, so that proper config attributes are set after firmware mismatch. bfa_iocfc.c: * Handle an IOC timer issue, where the IOC timer would expire before the init completion and send Init fail event to the driver, however IOC init continues and completes successfully at the later stage. The bfa and driver were not handling this kind of deferred init completion. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04[SCSI] bfa: Fix to allow creation of only 190 vports on CNA.Krishna Gudipati
Brocade CNA currently supports only 190 vports (instead of 191), since there are only 192 unicast cam entries reserved for FCoE. Brocade CNA has a total of 256 unicast cam entries (192 FCoE + 64 LL) 192 cam entries = 1 burned in mac + 1 baseport FPMA mac + 190 vport FPMA macs. Made changes to the code to support only 190 vports. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04[SCSI] bfa: New interface to handle firmware upgrade scenarioKrishna Gudipati
Split bfa_fcs_init() into bfa_fcs_attach() and bfa_fcs_init(). Removed empty function definitions in FCS modules Modified driver to call bfa_fcs_attach() and bfa_fcs_init() as needed. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04[SCSI] bfa: Changes to support FDMI Driver ParameterKrishna Gudipati
Added a FCS function to be called during driver init, to set the FDMI Driver parameter. fdmi.c: Created a disabled state when fdmi is disabled. bfad.c: * Added fdmi_enable driver parameter. * Added support to call bfa_fcs_set_fdmi_param() to initialize fcs fdmi setting. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04[SCSI] bfa: Enable new halt interrupt in BFA.Krishna Gudipati
bfa_intr.c: Enable new halt interrupt in BFA. bfi_ctreg.h: Expose new halt interrupt bit definition to host. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04[SCSI] bfa: Enable IOC auto-recovery and IOC type fix.Krishna Gudipati
bfa_ioc.c: - Enable IOC auto-recovery by default. - When CNA is in FC mode, return IOC type as FC (not FCoE) bfa_iocfc.c: - Set fcmode before pci initialization/setup. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-04[SCSI] bfa: Defined a new LPS event to clear virtual link on a vportKrishna Gudipati
Clear virtual links was not propagated upwards to bfa from fw. This resulted in HBA and switch being in an inconsistent state. So defined a new LPS event for clear virtual link on a vport, and also now clear virtual link on a baseport, is sent as a link down event from the fw. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>