summaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2008-07-16PNP: add pnp_possible_config() -- can a device could be configured this way?Bjorn Helgaas
As part of a heuristic to identify modem devices, 8250_pnp.c checks to see whether a device can be configured at any of the legacy COM port addresses. This patch moves the code that traverses the PNP "possible resource options" from 8250_pnp.c to the PNP subsystem. This encapsulation is important because a future patch will change the implementation of those resource options. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-15Merge commit '85082fd7cbe3173198aac0eb5e85ab1edcc6352c' into test-buildBenjamin Herrenschmidt
Manual fixup of: arch/powerpc/Kconfig
2008-07-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits) [ARM] 5171/1: ep93xx: fix compilation of modules using clocks [ARM] 5133/2: at91sam9g20 defconfig file [ARM] 5130/4: Support for the at91sam9g20 [ARM] 5160/1: IOP3XX: gpio/gpiolib support [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits. [ARM] 5084/1: zylonite: Register AC97 device [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state [ARM] 5144/1: pxaficp_ir: cleanup includes [ARM] pxa: remove pxa_set_cken() [ARM] pxa: allow clk aliases [ARM] Feroceon: don't disable BPU on boot [ARM] Orion: LED support for HP mv2120 [ARM] Orion: add RD88F5181L-FXO support [ARM] Orion: add RD88F5181L-GE support [ARM] Orion: add Netgear WNR854T support [ARM] s3c2410_defconfig: update for current build [ARM] Acer n30: Minor style and indentation fixes. ...
2008-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (31 commits) avr32: Fix typo of IFSR in a comment in the PIO header file avr32: Power Management support ("standby" and "mem" modes) avr32: Add system device for the internal interrupt controller (intc) avr32: Add simple SRAM allocator avr32: Enable SDRAMC clock at startup rtc-at32ap700x: Enable wakeup macb: Basic suspend/resume support atmel_serial: Drain console TX shifter before suspending atmel_serial: Fix build on avr32 with CONFIG_PM enabled avr32: Use a quicklist for PTE allocation as well avr32: Use a quicklist for PGD allocation avr32: Cover the kernel page tables in the user PGDs avr32: Store virtual addresses in the PGD avr32: Remove useless zeroing of swapper_pg_dir at startup avr32: Clean up and optimize the TLB operations avr32: Rename at32ap.c -> pdc.c avr32: Move setup_platform() into chip-specific file avr32: Kill special exception handler sections avr32: Kill unneeded #include <asm/pgalloc.h> from asm/mmu_context.h avr32: Clean up time.c #includes ...
2008-07-14cpm_uart: Support uart_wait_until_sent()Laurent Pinchart
Set port->fifosize to the software FIFO size, and update the port timeout when the baud rate is modified. SCC ports have an optional 32 byte hardware FIFO which is currently not taken into account, as there is no documented way to check when the FIFO becomes empty. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14cpm_uart: Fix cpm uart corruption with PREEMPT_RTRune Torgersen
Fix CPM serial port corruption when running with CONFIG_PREEMPT_RT. Userland usage of console, and kernel printf's were stepping on each others toes. Also only take lock if not in an oops. Signed-off-by: Rune Torgersen <runet@innovsys.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14Merge commit 'origin/HEAD' into test-mergeBenjamin Herrenschmidt
Manual fixup of include/asm-powerpc/pgtable-ppc64.h
2008-07-12serial8250: sanity check nr_uarts on all paths.Eric W. Biederman
I had 8250.nr_uarts=16 in the boot line of a test kernel and I had a weird mysterious crash in sysfs. After taking an in-depth look I realized that CONFIG_SERIAL_8250_NR_UARTS was set to 4 and I was walking off the end of the serial8250_ports array. Ouch!!! Don't let this happen to someone else. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Alan Cox <alan@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-10Merge branch 'imx' into develRussell King
Conflicts: arch/arm/mm/Kconfig
2008-07-05MX2 add support for mx2 in i.MX serial driverSascha Hauer
add support for mx2 in i.MX serial driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05mxc: add MX3 support for i.MX internal UART driverSascha Hauer
This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX: introduce clock APISascha Hauer
This patch introduces the clock API for i.MX and converts all in-Kernel drivers to use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX UART: remove statically initialized tablesSascha Hauer
This patch removes the statically initialized tables from the i.MX serial driver and makes the driver fully dependent on the information provided by the platform_device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX UART: Add board specific init/exit functionsSascha Hauer
Add platform specific init functions. Also rename the struct platform_device dev into pdev. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX UART: do not assume 16MHz reference frequencySascha Hauer
We assumed a 16MHz reference frequency for the UART. While this is true for i.MX1 most of the time it is not true for MX27/MX31. Also, add handling for the ONEMS register which is present on newer versions of the chip and pass a sane minimum baudrate to uart_get_baud_rate(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-04serial: fix serial_match_port() for dynamic major tty-device numbersGuennadi Liakhovetski
As reported by Vipul Gandhi, the current serial_match_port() doesn't work for tty-devices using dynamic major number allocation. Fix it. It oopses if you suspend a serial port with _dynamic_ major number. ATM, I think, there's only the drivers/serial/jsm/jsm_driver.c driver, that does it in-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Vipul Gandhi <vcgandhi1@aol.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-03[ARM] S3C24XX: Split serial driver into core and per-cpu driversBen Dooks
The S3C2410 serial driver in drivers/serial/s3c2410.c has been growing bigger with the addition of more variants of this hardware with the growing Samsung SoCs range. As such, it would be easier to split this code up into a core and per-cpu drivers to make driver addition easier, and the core smaller. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C2410: Add sysfs attribute for serial driver clock sourceBen Dooks
Add attribute to show the current clock source for the serial driver and remove old and annoying debug output. Note, this only currently shows the current source with a "* " prefix to indicate that it is the current source. Future code will list all the clock sources, with the non-selected one with " " prefix. Signed-off-by: Ben Dooks <ben-linux@fluff.org> PATCH FOLLOWS KernelVersion: 2.6.26-rc3
2008-07-03[ARM] 5054/1: S3C2410: Add GPLv2 license to the s3c2410 serial driverBen Dooks
The original driver had an MODULE_LICENSE statement for GPL, but no explict license in the header of the file. To make this more explicit, and since I am the original authour, we will add a GPLv2 header. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] 5050/1: S3C2410: Cleanup header on S3C2410 serial driverBen Dooks
Remove the changelog which should really be found in the version control system. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02atmel_serial: Drain console TX shifter before suspendingHaavard Skinnemoen
Funny things may happen if we stop the USART clock before the shifter is empty. Prevent this from happening by waiting until the shifter is completely drained before allowing suspend to continue. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za>
2008-07-02atmel_serial: Fix build on avr32 with CONFIG_PM enabledHaavard Skinnemoen
AVR32 doesn't have at91_suspend_entering_slow_clock(). Just assume the clock will keep running for now. David has a better solution for this, but this works for now. Leaving the USART clock running won't prevent the PM code from entering deep power-down modes anyway. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <linux@maxim.org.za>
2008-06-30Merge branch 'linux-2.6'Paul Mackerras
2008-06-26cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING codeKumar Gala
Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-26cpm_uart: fix whitespace issuesKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-19Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue.Sonic Zhang
This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-09of_serial: Use linux/of_platform.h instead of asmStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-07Blackfin serial driver: fix up tty core set_ldisc API change breakage bugGraf Yang
This is the patch that follows Linus's modification about set_ldisc. Graf has built and tested it on BF537 using Linus's git Tree. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-06atmel_serial: filter out FP during baud rate detectionHaavard Skinnemoen
I made a change to u-boot that used the FP (Fractional Part) field of BRGR to achieve more accurate baud rate generation. Unfortunately, the atmel_serial driver looks at the whole BRGR register when trying to detect the baud rate that the port is currently running at, so setting FP to a nonzero value breaks the baud rate detection. I'll sit on the u-boot patch for a while longer, but this is clearly a bug in the atmel_serial driver which should be fixed. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06serial: fix driver_name conflictsAnton Vorontsov
Some drivers are using too generic "serial" name for driver_name, this might cause issues, like this: Freescale QUICC Engine UART device driver proc_dir_entry 'serial' already registered Call Trace: [cf82de50] [c0007f7c] show_stack+0x4c/0x1ac (unreliable) [cf82de90] [c00b03fc] proc_register+0xfc/0x1ac [cf82dec0] [c00b05c8] create_proc_entry+0x60/0xac [cf82dee0] [c00b23dc] proc_tty_register_driver+0x60/0x98 [cf82def0] [c016dbd8] tty_register_driver+0x1b4/0x228 [cf82df20] [c0184d70] uart_register_driver+0x144/0x194 [cf82df40] [c030a378] ucc_uart_init+0x2c/0x94 [cf82df50] [c02f21a0] kernel_init+0x98/0x27c [cf82dff0] [c000fa74] kernel_thread+0x44/0x60 ^^ The board is using ucc_uart.c and 8250.c, both registered as "serial". This patch fixes two drivers that are using "serial" for driver_name and not "ttyS" for dev_name. Drivers that are using "ttyS" for dev_name, will conflict anyway, so we don't bother with these. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Alan Cox <alan@redhat.com> Acked-By: Timur Tabi <timur@freescale.com> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-04Fix uart_set_ldisc() function typeLinus Torvalds
Commit 64e9159f5d2c4edf5fa6425031e556f8fddaf7e6 ("serial_core: uart_set_ldisc infrastructure") introduced the ability for low-level serial drivers to be informed when the tty ldisc changes. However, the actual tty-layer function that does this callback for serial devices was declared with the wrong type, having a spurious and unused 'ldisc' argument. This fixed the resulting compiler warning by just removing it. Acked-by: Blithering Idiot <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-03serial_core: uart_set_ldisc infrastructureAlan Cox
The tty layer provides a callback that is used when the line discipline is changed. Some hardware uses this to configure hardware specific features such as IrDA mode on serial ports. Unfortunately the serial layer does not provide this feature or pass it down to drivers. Blackfin used to hack around this by rewriting the tty ops, but those are now properly shared and const so the hack fails. Instead provide the proper operations. This change plus a follow up from the Blackfin guys is needed to avoid blackfin losing features in this release. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-03Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.Sonic Zhang
Hide difference in head file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-318250 Serial Driver: revert extra IRQ flag definition patchBryan Wu
As Russell pointed out, original patch will break some serial configurations because of the dependency of the <asm/serial.h> header file. Revert it first and try to find out other solution later Cc: Javier Herrero <jherrero@hvsistemas.es> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-24serial: fix enable_irq_wake/disable_irq_wake imbalance in serial_core.cArjan van de Ven
enable_irq_wake() and disable_irq_wake() need to be balanced. However, serial_core.c calls these for different conditions during the suspend and resume functions... This is causing a regular WARN_ON() as found at http://www.kerneloops.org/search.php?search=set_irq_wake This patch makes the conditions for triggering the _wake enable/disable sequence identical. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24serial: support for InstaShield IS-400 four port RS-232 PCI cardIgnacio García Pérez
Add support for the InstaShield IS-400 four port RS-232 PCI card. Signed-off-by: Ignacio García Pérez <iggarpe@t2i.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-21sunhv: Fix locking in non-paged I/O case.David S. Miller
This causes the lock to be taken twice, thus resulting in a deadlock. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin SPORTS UART Driver: converting BFIN->BLACKFIN Blackfin serial driver: add extra IRQ flag for 8250 serial driver 8250 Serial Driver: Added support for 8250-class UARTs in HV Sistemas H8606 board Blackfin arch: Fix bug - USB fails to build for BF524/BF526 Blackfin arch: update boards defconfig files Blackfin arch: IO Port functions to read/write unalligned memory Blackfin arch: enable a choice to provide 4M DMA memory Blackfin arch: cleanup the icplb/dcplb multiple hit checks Blackfin arch: Add workaround to read edge triggered GPIOs Blackfin arch: Sync channel defines with struct dma_register dma_io_base_addr. Blackfin arch: Check for Anomaly 05000182 [Blackfin] arch: rename bf5xx-flash to bfin-async-flash [Blackfin] arch: Blackfin checksum annotations
2008-05-17Blackfin SPORTS UART Driver: converting BFIN->BLACKFINMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-178250 Serial Driver: Added support for 8250-class UARTs in HV Sistemas H8606 ↵Javier Herrero
board Added support for 8250-class UARTs in HV Sistemas H8606 board, modification in 8250.c driver for correct compilation with Blackfin Besides, I think that there is more people using 8250-class UARTs with a different hardware than the H8606 board. This code can be shared by them. Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-16sh: use the common ascii hex helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-15m68knommu: add info about removing mcfserialSebastian Siewior
Schedule a removal for this driver. Alternative driver is available for a while now. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-12cris: Fix compile failure due to typo in serial driverAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (21 commits) Blackfin Serial Driver: abstract away DLAB differences into header Blackfin Serial Driver: macro away the IER differences between processors [Blackfin] arch: remove useless IRQ_SW_INT defines [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver [Blackfin] arch: Set spi flash partition on bf527 as like bf548. [Blackfin] arch: fix bug - Remove module will not free L1 memory used [Blackfin] arch: fix wrong header name in comment [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit [Blackfin] arch: Add physmap partition for BF527-EZkit [Blackfin] arch: fix gdb testing regression [Blackfin] arch: disable single stepping when delivering a signal [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c. [Blackfin] arch: In the double fault handler, set up the PT_RETI slot [Blackfin] arch: Support for CPU_FREQ and NOHZ [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support [Blackfin] arch: fix bug - breaking the atomic sections code. [Blackfin] arch: Equalize include files: Add VR_CTL masks ...
2008-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (37 commits) SH: catch negative denormal_subf1() retval in denormal_add() sh: Fix DMAC base address for SH7709S sh: update smc91x platform data for se7206. sh: Stub in cpu_to_node() and friends for NUMA build. sh: intc register modify fix sh: no high level trigger on some sh3 cpus sh: clean up sh7710 and sh7720 intc tables sh: add interrupt ack code to sh3 sh: unify external irq pin code for sh3 sh-sci: avoid writing to nonexistent registers sh-sci: sh7722 lacks scsptr registers sh-sci: improve sh7722 support sh: reset hardware from early printk sh: drain and wait for early printk sh: use sci_out() for early printk sh: add memory resources to /proc/iomem sh: add kernel bss resource sh: fix sh7705 interrupt vector typo sh: update smc91x platform data for se7722 sh: update smc91x platform data for MigoR ...
2008-05-08serial: access after NULL check in uart_flush_buffer()Tetsuo Handa
I noticed that static void uart_flush_buffer(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port = state->port; unsigned long flags; /* * This means you called this function _after_ the port was * closed. No cookie for you. */ if (!state || !state->info) { WARN_ON(1); return; } is too late for checking state != NULL. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08sh-sci: avoid writing to nonexistent registersMagnus Damm
Only write to hardware in SCI_OUT() if the register size is valid. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh-sci: sh7722 lacks scsptr registersMagnus Damm
The sh7722 serial ports all lack SCSPTR registers, so mark them as nonexistent in the register table. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh-sci: improve sh7722 supportMagnus Damm
Improve sh7722 support for SCIF1 and SCIF2 and separate code from sh7366 implementation. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: Enable use of the clk fwk on SH-5.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>