summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2013-07-15Merge remote-tracking branch 'spi/fix/xilinx' into spi-linusMark Brown
2013-07-15Merge remote-tracking branch 'spi/fix/setup' into spi-linusMark Brown
2013-07-15Merge remote-tracking branch 'spi/fix/s3c64xx' into spi-linusMark Brown
2013-07-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
2013-07-11spi: revert master->setup function removal for altera and nuc900Stephen Warren
Commit 24778be "spi: convert drivers to use bits_per_word_mask" removed what appeared to be redundant code from many drivers. However, it appears that in the spi-bitbang case, these functions are required by the spi-bitbang core, even if they don't do anything. Restore them. For 3.12, the spi-bitbang core should be adjusted not to require these callbacks to exist if they don't need to do anything. This is the equivalent of Michal Simek's patch "spi/xilinx: Revert master->setup function removal", applied to other affected drivers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-10spi/xilinx: Revert master->setup function removalMichal Simek
master->setup() must be initialized to be able to successfully run spi_bitbang_start() and satisfy if/else logic there. "spi: convert drivers to use bits_per_word_mask" (sha1: 24778be20f87d5aadb19624fc768b3159fa43efc) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04Merge branch 'akpm' (updates from Andrew Morton)Linus Torvalds
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
2013-07-03drivers: avoid parsing names as kthread_run() format stringsKees Cook
Calling kthread_run with a single name parameter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
2013-07-03Merge tag 'spi-v3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for the SPI subsystem, the standout changes being: - Core support for implementing bits per word constraints implemented by Stephen Warren, factoring some code out of drivers. - Addition of polling mode support for the s3c64xx driver as some newer Exynos systems have taken the unusual step of removing interrupt support. - Use of the in-IP FIFO and generic dmaengine support for the OMAP2 driver, providing improved performance. - Conversion of the mpc512x driver to use the core message queue infrastructure. The nicest thing being that all the factoring out into common code leads to a negative diffstat overall." * tag 'spi-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (42 commits) spi/s3c64xx: Rely on the compiler eliminating the OF ID table spi: s3c64xx: Added support for exynos5440 spi spi: s3c64xx: Added provision for dedicated cs pin spi: omap2-mcspi: add generic DMA request support to the DT binding spi: omap2-mcspi: convert to dma_request_slave_channel_compat() spi/s3c64xx: Make wait_for_timeout() function name less generic spi: s3c64xx: added support for polling mode spi: omap2-mcspi: Add FIFO buffer support spi: omap2-mcspi: Move bytes per word calculation to the function spi: spi-xilinx: cleanup a check in xilinx_spi_txrx_bufs() spi: spi-nuc900: Remove redundant platform_set_drvdata() spi: spi-fsl-lib: Make mpc8xxx_spi_work static spi: spi-topcliff-pch: Fix sparse warnings spi: spi-xilinx: Remove redundant platform_set_drvdata() spi: spi-xilinx: Add run run-time endian detection spi: mpc512x: use the SPI subsystem's message queue spi: mpc512x: improve throughput in the RX/TX func spi: mpc512x: minor prep before feature change spi: atmel: convert to dma_request_slave_channel_compat() spi: sirf: avoid uninitialized-use warning ...
2013-07-03Merge tag 'pinctrl-for-v3.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
2013-07-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
2013-07-02Merge tag 'fixes-non-critical-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann: "These are various bug fixes that were not considered important enough for merging into 3.10. The majority of the ARM fixes are for the OMAP and at91 platforms, and there is another set of bug fixes for device drivers that resolve 'randconfig' build errors and that the subsystem maintainers either did not pick up or preferred to get merged through the arm-soc tree." * tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: at91/PMC: use at91_usb_rate() for UTMI PLL ARM: at91/PMC: fix at91sam9n12 USB FS init ARM: at91/PMC: at91sam9n12 family has a PLLB ARM: at91/PMC: sama5d3 family doesn't have a PLLB ARM: tegra: fix section mismatch in tegra_pmc_parse_dt ARM: mxs: don't select HAVE_PWM ARM: mxs: stub out mxs_pm_init for !CONFIG_PM cpuidle: calxeda: select ARM_CPU_SUSPEND ARM: mvebu: fix length of ethernet registers in mv78260 dtsi ARM: at91: cpuidle: Fix target_residency ARM: at91: fix at91_extern_irq usage for non-dt boards ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change X.509: do not emit any informational output mtd: omap2: allow bulding as a module [SCSI] nsp32: use mdelay instead of large udelay constants hwrng: bcm2835: fix MODULE_LICENSE tag ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED ARM: at91: Fix link breakage when !CONFIG_PHYLIB MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES ...
2013-07-02spi: s3c64xx: add missing check for polling modeGirish K S
After the patch "spi/s3c64xx: Fix non-dmaengine usage" with commit id 563b444e33810f3120838620c990480304e24e63 submitted by Mark Brown, the spi device detection in polling mode breaks. This revealed the missing check for polling during dma prepare. This patch adds the missing check. Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-28Merge branch 'pm-assorted'Rafael J. Wysocki
* pm-assorted: PM / QoS: Add pm_qos and dev_pm_qos to events-power.txt PM / QoS: Add dev_pm_qos_request tracepoints PM / QoS: Add pm_qos_request tracepoints PM / QoS: Add pm_qos_update_target/flags tracepoints PM / QoS: Update Documentation/power/pm_qos_interface.txt PM / Sleep: Print last wakeup source on failed wakeup_count write PM / QoS: correct the valid range of pm_qos_class PM / wakeup: Adjust messaging for wake events during suspend PM / Runtime: Update .runtime_idle() callback documentation PM / Runtime: Rework the "runtime idle" helper routine PM / Hibernate: print physical addresses consistently with other parts of kernel
2013-06-26Merge remote-tracking branch 'spi/topic/xilinx' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/txx9' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/topcliff' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/sirf' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/s3c64xx' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/s3c24xx' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/pxa' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/pl022' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/pdata' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/omap' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/nuc900' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/mxs' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/mpc512x' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/imx' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/fsl' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/ep93xx' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/coldfire-qspi' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/bpw' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/bcm2835' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/topic/atmel' into spi-nextMark Brown
2013-06-26Merge remote-tracking branch 'spi/fix/xilinx' into spi-linusMark Brown
2013-06-26Merge remote-tracking branch 'spi/fix/s3c64xx' into spi-linusMark Brown
2013-06-26spi/s3c64xx: Rely on the compiler eliminating the OF ID tableMark Brown
This should work with modern compilers, isn't that much of an issue if it goes wrong and it ensures that the DT-only hardware variants don't leave unreferenced parameters structures lying around. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-25spi: s3c64xx: Added support for exynos5440 spiGirish K S
This patch adds support for the exynos5440 spi controller. The integration of the spi IP in exynos5440 is different from other SoC's. The I/O pins are no more configured via gpio, they have dedicated pins. Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-25spi: s3c64xx: Added provision for dedicated cs pinGirish K S
The existing driver supports gpio based /cs signal. For controller's that have one device per controller, the slave device's /cs signal might be internally controlled by the chip select bit of slave select register. They are not externally asserted/deasserted using gpio pin. This patch adds support for controllers with dedicated /cs pin. if "cs-gpio" property doesnt exist in a spi dts node, the controller would treat the /cs pin as dedicated. Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-24Merge remote-tracking branch 'spi/fix/s3c64xx' into spi-linusMark Brown
2013-06-24spi: omap2-mcspi: convert to dma_request_slave_channel_compat()Matt Porter
Convert dmaengine channel requests to use dma_request_slave_channel_compat(). This supports the DT case of platforms requiring channel selection from either the OMAP DMA or the EDMA engine. AM33xx only boots from DT and is the only user implementing EDMA so in the !DT case we can default to the OMAP DMA filter. Signed-off-by: Matt Porter <mporter@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Joel A Fernandes <joelagnel@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-21spi/pxa2xx: fix memory corruption due to wrong size used in devm_kzalloc()Mika Westerberg
ACPI part of the driver accidentally used sizeof(*ssp) instead of the correct sizeof(*pdata). This leads to nasty memory corruptions like the one below: BUG: unable to handle kernel paging request at 0000000749fd30b8 IP: [<ffffffff813fe8a1>] __list_del_entry+0x31/0xd0 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 30 Comm: kworker/0:1 Not tainted 3.10.0-rc6v3.10-rc6_sdhci_modprobe+ #443 task: ffff8801483a0940 ti: ffff88014839e000 task.ti: ffff88014839e000 RIP: 0010:[<ffffffff813fe8a1>] [<ffffffff813fe8a1>] __list_del_entry+0x31/0xd0 RSP: 0000:ffff88014839fde8 EFLAGS: 00010046 RAX: ffff880149fd30b0 RBX: ffff880149fd3040 RCX: dead000000200200 RDX: 0000000749fd30b0 RSI: ffff880149fd3058 RDI: ffff88014834d640 RBP: ffff88014839fde8 R08: ffff88014834d640 R09: 0000000000000001 R10: ffff8801483a0940 R11: 0000000000000001 R12: ffff880149fd3040 R13: ffffffff810e0b30 R14: ffff8801483a0940 R15: ffff88014834d640 FS: 0000000000000000(0000) GS:ffff880149e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000168 CR3: 0000000001e0b000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88014839fe48 ffffffff810e0baf ffffffff81120abd ffff88014839fe20 ffff8801483a0940 ffff8801483a0940 ffff8801483a0940 ffff8801486b1c90 ffff88014834d640 ffffffff810e0b30 0000000000000000 0000000000000000 Call Trace: [<ffffffff810e0baf>] worker_thread+0x7f/0x390 [<ffffffff81120abd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810e0b30>] ? manage_workers.isra.22+0x2b0/0x2b0 [<ffffffff810e6c09>] kthread+0xd9/0xe0 [<ffffffff810f93df>] ? local_clock+0x3f/0x50 [<ffffffff810e6b30>] ? kthread_create_on_node+0x110/0x110 [<ffffffff818c5dec>] ret_from_fork+0x7c/0xb0 [<ffffffff810e6b30>] ? kthread_create_on_node+0x110/0x110 Fix this by using the right structure size in devm_kzalloc(). Reported-by: Jerome Blin <jerome.blin@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org # 3.9+
2013-06-20Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/soc From Shawn Guo: imx soc changes for 3.11: * New SoCs i.MX6 Sololite and Vybrid VF610 support * imx5 and imx6 clock fixes and additions * Update clock driver to use of_clk_init() function * Refactor restart routine mxc_restart() to get it work for DT boot as well * Clean up mxc specific ulpi access ops * imx defconfig updates * tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (29 commits) ARM: imx_v6_v7_defconfig: Enable Vybrid VF610 ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd ARM: imx_v6_v7_defconfig: Enable PWM and backlight options ARM: imx: Remove mxc specific ulpi access ops ARM: imx: add initial support for VF610 ARM: imx: add VF610 clock support ARM: imx_v6_v7_defconfig: enable parallel display ARM: imx: clk: No need to initialize phandle struct ARM: imx: irq-common: Include header to avoid sparse warning ARM: imx: Enable mx6 solo-lite support ARM: imx6: use common of_clk_init() call to initialize clocks ARM: imx6q: call of_clk_init() to register fixed rate clocks ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE ARM: i.MX6: clk: add different DualLite MLB clock config ARM i.MX5: Add S/PDIF clocks ARM i.MX53: Add SATA clock ARM: imx6q: clk: add the eim_slow clock ARM: imx: remove MLB PLL from pllv3 ARM: imx: disable pll8_mlb in mx6q_clks ... Conflicts: arch/arm/Kconfig.debug (simple add/add conflict) Includes an update to 3.10-rc6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-19Merge tag 'u300-multiplatform' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc From Linus Walleij: Device Tree and Multiplatform support for U300: - Add devicetree support to timer, pinctrl (probe), I2C block, watchdog, DMA controller and clocks. - Piecewise add a device tree containing all peripherals. - Delete the ATAG boot path. - Delete redundant platform data and board files. - Convert to multiplatform. * tag 'u300-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (40 commits) ARM: u300: switch to using syscon regmap for board ARM: u300: Update MMC configs for u300 defconfig spi: pl022: use DMA by default when probing from DT pinctrl: get rid of all platform data for coh901 ARM: u300: convert MMC/SD clock to device tree ARM: u300: move the gated system controller clocks to DT i2c: stu300: do not request a specific clock name clk: move the U300 fixed and fixed-factor to DT ARM: u300: remove register definition file ARM: u300: add syscon node ARM: u300 use module_spi_driver to register driver ARM: u300: delete remnant machine headers ARM: u300: convert to multiplatform ARM: u300: localize <mach/u300-regs.h> ARM: u300: delete <mach/irqs.h> ARM: u300: delete <mach/hardware.h> ARM: u300: push down syscon registers ARM: u300: remove deps from debug macro ARM: u300: move debugmacro to debug includes ARM: u300: delete all static board data ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-19ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessaryArnd Bergmann
I got a build error today that made me realize that it is not possible to build a kernel for a SiRF platform without enabling CONFIG_PRIMA2, since a lot of common code depends on CONFIG_PRIMA2. This fixes all occurences that appear like common SiRF code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Barry Song <Baohua.Song@csr.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-06-19spi/s3c64xx: Make wait_for_timeout() function name less genericMark Brown
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-19spi: s3c64xx: added support for polling modeGirish K S
The 64xx spi driver supports partial polling mode. Only the last chunk of the transfer length is transferred or recieved in polling mode. Some SoC's that adopt this controller might not have have dma interface. This patch adds support for complete polling mode and gives flexibity for the user to select poll/dma mode. Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-18spi/pxa2xx: use GFP_ATOMIC in sg table allocationMika Westerberg
pxa2xx_spi_map_dma_buffer() gets called in tasklet context so we can't sleep when we allocate a new sg table. Use GFP_ATOMIC here instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org