| Age | Commit message (Collapse) | Author |
|---|
|
This resolves the conflict in:
drivers/staging/vt6656/ioctl.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
device is unregistered
(Life cycle of timed output device driver)
1) register the device as the timed output
2) enable() ops is called via the sysfs
timeout > 0 : timer is activated and device is turned on
timeout = 0 : timer is cancelled and device is off
3) unregister the timed output device if not used any more
So the registered device should be disabled explicitly when the module is removed.
('disabled' means the timer is stopped and the device is turned off)
Rather than implementing that code in each driver,
just call enable() with timeout = 0 to clean up the driver.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Mike Lockwood <lockwood@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix sparse warnings by adding __user annotation to stucts.
This patch fixes the the following sparse warnings:
drivers/staging/android/binder.c:1343:76: warning:
incorrect type in argument 2 (different address spaces)
drivers/staging/android/binder.c:1343:76:
expected void [noderef] <asn:1>*ptr
drivers/staging/android/binder.c:1343:76: got void *binder
drivers/staging/android/binder.c:1567:57: warning:
incorrect type in argument 2 (different address spaces)
drivers/staging/android/binder.c:1567:57:
expected void const [noderef] <asn:1>*from
drivers/staging/android/binder.c:1567:57:
got void const *buffer
drivers/staging/android/binder.c:1573:46: warning:
incorrect type in argument 2 (different address spaces)
drivers/staging/android/binder.c:1573:46:
expected void const [noderef] <asn:1>*from
drivers/staging/android/binder.c:1573:46:
got void const *offsets
drivers/staging/android/binder.c:1603:76: warning:
incorrect type in argument 2 (different address spaces)
drivers/staging/android/binder.c:1603:76:
expected void [noderef] <asn:1>*ptr
drivers/staging/android/binder.c:1603:76: got void *binder
drivers/staging/android/binder.c:1605:64: warning:
incorrect type in argument 2 (different address spaces)
drivers/staging/android/binder.c:1605:64:
expected void [noderef] <asn:1>*ptr
drivers/staging/android/binder.c:1605:64: got void *binder
drivers/staging/android/binder.c:1605:76: warning:
incorrect type in argument 3 (different address spaces)
drivers/staging/android/binder.c:1605:76:
expected void [noderef] <asn:1>*cookie
drivers/staging/android/binder.c:1605:76: got void *cookie
drivers/staging/android/binder.c:1613:40: error:
incompatible types in comparison
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In their current AOSP tree, the Android in-kernel wakelock
infrastructure has been reimplemented in terms of wakeup
sources:
http://git.linaro.org/gitweb?p=people/jstultz/android.git;a=commitdiff;h=e9911f4efdc55af703b8b3bb8c839e6f5dd173bb
The Android alarm driver currently has stubbed out calls
to wakelock functionality. So this patch simply converts
the stubbed out wakelock calls to wakeup source calls, and
removes the empty wakelock macros
Greg, would you mind queuing this in staging-next?
CC: Colin Cross <ccross@android.com>
CC: Arve Hjønnevåg <arve@android.com>
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that alarm-dev.c uses the upstreamed alarmtimer interfaces,
we can remove the otherwise unused in-kernel android alarm api.
CC: Colin Cross <ccross@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reworks the alarm-dev.c to use the upstreamed alarmtimers
interface.
CC: Colin Cross <ccross@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ALARM_ELAPSED_REALTIME clock domain in Android pointed
to the need for something similar in linux system-wide
(instead of limited to just the alarm interface).
Thus CLOCK_BOOTTIME was introduced into the upstream kernel
in 2.6.39.
This patch attempts to convert the android alarm timer to utilize
the kernel's CLOCK_BOOTTIME clockid for ALARM_ELAPSED_REALTIME,
instead of managing it itself.
CC: Colin Cross <ccross@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix printk format warnings by using 't' modifier for ptrdiff_t.
drivers/staging/android/alarm.c:344:2: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
drivers/staging/android/alarm.c:367:3: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix spelling typo in comments within android drivers.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg KH:
"Here are a number of bugfixes for the drivers/staging/ portion of the
kernel that have been reported recently.
Nothing major here, with maybe the exception of the ramster code can
now be built so it is enabled in the build again, and lots of memory
leaks that people like to have fixed on their systems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'staging-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: fix mem leaks in __persistent_ram_init()
staging: vt6656: Don't leak memory in drivers/staging/vt6656/ioctl.c::private_ioctl()
staging: iio: hmc5843: Fix crash in probe function.
staging/xgifb: fix display on XGI Volari Z11m cards
Staging: android: timed_gpio: Fix resource leak in timed_gpio_probe error paths
android: make persistent_ram based drivers depend on HAVE_MEMBLOCK
staging: iio: ak8975: Remove i2c client data corruption
staging: drm/omap: move where DMM driver is registered
staging: zsmalloc: fix memory leak
Staging: rts_pstor: off by one in for loop
staging: ozwpan: Added new maintainer for ozwpan
staging:rts_pstor:Avoid "Bad target number" message when probing driver
staging:rts_pstor:Fix possible panic by NULL pointer dereference
Staging: vt6655-6: check keysize before memcpy()
staging/media/as102: Don't call release_firmware() on uninitialized variable
staging:iio:core add missing increment of loop index in iio_map_array_unregister()
staging: ramster: unbreak my heart
staging/vme: Fix module parameters
staging: sep: Fix sign of error
|
|
If, in __persistent_ram_init(), the call to
persistent_ram_buffer_init() fails or the call to
persistent_ram_init_ecc() fails then we fail to free the memory we
allocated to 'prz' with kzalloc() - thus leaking it.
To prevent the leaks I consolidated all error exits from the function
at a 'err:' label at the end and made all error cases jump to that
label where we can then make sure we always free 'prz'. This is safe
since all the situations where the code bails out happen before 'prz'
has been stored anywhere and although we'll do a redundant kfree(NULL)
call in the case of kzalloc() itself failing that's OK since kfree()
deals gracefully with NULL pointers and I felt it was more important
to keep all error exits at a single location than to avoid that one
harmless/redundant kfree() on a error path.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Colin Cross <ccross@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix printk format warnings in android/persistent_ram.c:
drivers/staging/android/persistent_ram.c:426:4: warning: format '%ld' expects type 'long int', but argument 2 has type 'size_t'
drivers/staging/android/persistent_ram.c:426:4: warning: format '%ld' expects type 'long int', but argument 3 has type 'size_t'
drivers/staging/android/persistent_ram.c:430:4: warning: format '%ld' expects type 'long int', but argument 2 has type 'size_t'
drivers/staging/android/persistent_ram.c:430:4: warning: format '%ld' expects type 'long int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If gpio_request fails, we need to free all allocated resources.
Current code uses wrong array index to access gpio_data array.
So current code actually frees gpio_data[i].gpio by j times.
This patch moves the error handling code to err_out and thus improves
readability.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
m68k doesn't have memblock_reserve, which causes a build failure
with allmodconfig. Make PERSISTENT_RAM and RAM_CONSOLE depend on
HAVE_MEMBLOCK.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The task handoff notifier leaks task_struct since it never gets freed
after the callback returns NOTIFY_OK, which means it is responsible for
doing so.
It turns out the lowmemorykiller actually doesn't need this notifier at
all. It's used to prevent unnecessary killing by waiting for a thread
to exit as a result of lowmem_shrink(), however, it's possible to do
this in the same way the kernel oom killer works by setting TIF_MEMDIE
and avoid killing if we're still waiting for it to exit.
The kernel oom killer will already automatically set TIF_MEMDIE for
threads that are attempting to allocate memory that have a fatal signal.
The thread selected by lowmem_shrink() will have such a signal after the
lowmemorykiller sends it a SIGKILL, so this won't result in an
unnecessary use of memory reserves for the thread to exit.
This has the added benefit that we don't have to rely on
CONFIG_PROFILING to prevent needlessly killing tasks.
Reported-by: Werner Landgraf <w.landgraf@ru.ru>
Cc: stable@vger.kernel.org
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x32 support for x86-64 from Ingo Molnar:
"This tree introduces the X32 binary format and execution mode for x86:
32-bit data space binaries using 64-bit instructions and 64-bit kernel
syscalls.
This allows applications whose working set fits into a 32 bits address
space to make use of 64-bit instructions while using a 32-bit address
space with shorter pointers, more compressed data structures, etc."
Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c}
* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
x32: Fix alignment fail in struct compat_siginfo
x32: Fix stupid ia32/x32 inversion in the siginfo format
x32: Add ptrace for x32
x32: Switch to a 64-bit clock_t
x32: Provide separate is_ia32_task() and is_x32_task() predicates
x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls
x86/x32: Fix the binutils auto-detect
x32: Warn and disable rather than error if binutils too old
x32: Only clear TIF_X32 flag once
x32: Make sure TS_COMPAT is cleared for x32 tasks
fs: Remove missed ->fds_bits from cessation use of fd_set structs internally
fs: Fix close_on_exec pointer in alloc_fdtable
x32: Drop non-__vdso weak symbols from the x32 VDSO
x32: Fix coding style violations in the x32 VDSO code
x32: Add x32 VDSO support
x32: Allow x32 to be configured
x32: If configured, add x32 system calls to system call tables
x32: Handle process creation
x32: Signal-related system calls
x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h>
...
|
|
Fix build error when CONFIG_PRINTK is not selected.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
binder_update_page_range could read freed memory if the vma of the
selected process was freed right before the check that the vma
belongs to the mm struct it just locked.
If the vm_mm pointer in that freed vma struct had also been rewritten
with a value that matched the locked mm struct, then the code would
proceed and possibly modify the freed vma.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
WARNING: vmlinux.o(.text+0xfcf6e): Section mismatch in reference
from the function ram_console_driver_probe() to the function
.init.text:persistent_ram_init_ringbuffer()
The function ram_console_driver_probe() references
the function __init persistent_ram_init_ringbuffer().
This is often because ram_console_driver_probe lacks a __init
annotation or the annotation of persistent_ram_init_ringbuffer is
wrong.
Move this driver to platform_driver_probe() because ram console
devices aren't going to be added and removed at runtime. Also
shorten the probe function name since driver is redundant and
makes the function name long.
Cc: Android Kernel Team <kernel-team@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Linux kernel has a setting called dmesg_restrict. When true,
only processes with CAP_SYSLOG can view the kernel dmesg logs. This
helps prevent leaking of kernel information into user space.
On Android, it's possible to bypass these restrictions by viewing
/proc/last_kmsg.
This change makes /proc/last_kmsg require the same permissions as
dmesg.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Nick Kralevich <nnk@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the persistent ram buffer is not available, ram_console_late_init
would crash when dereferencing ram_console_zone. Return early if
ram console was not initialized.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the notrace attribute to persistent_ram_write and the
non-ecc functions that it calls to allow persistent_ram to
be used for ftracing (only when ecc is disabled).
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow persistent_ram_write to be called on multiple cpus at
the same time, as long as ecc is not in use. Uses atomics
for the buffer->start and buffer->size counters.
[jstultz: Fix up some pr_info casting issues on 64bit]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the ioremapped memory passed in from the drivers with
a memblock_reserve and vmap. Adds a new function,
persistent_ram_early_init, designed to be called from the machine
init_early callback, that calls memblock_remove and saves the
provided persistent ram area layout.
Drivers only pass in their struct device * and ecc settings.
Locating and mapping the memory is now handled entirely within
persistent_ram.
Also, convert ram_console to the new persistent_ram_init
parameters that only take a struct device * and ecc settings.
[jstultz: Fix pr_info casting issues on 64bit, folded two
patches as the build breaks if they are apart. Also replaced
phys_to_page() w/ pfn_to_page(addr>>PAGE_SHIFT), as phys_to_page
is only on a few arches.]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION and related
#ifdefs. Also allow persistent ram zones without ecc enabled.
For some use cases, like the data portion of the upcoming
persistent_vars patches, or a persistent ftrace ringbuffer,
ecc on every update is too expensive.
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Split ram_console into two halves.
persistent_ram is a set of apis that handle a block of memory
that does not get erased across a reboot. It provides functions
to fill it as a single buffer or a ring buffer, and to extract
the old data after a reboot. It handles ecc on the data to
correct bit errors introduced during reboot.
ram_console is now a small wrapper around persistent_ram that
feeds console data into the ringbuffer, and exports the old
data to /proc/last_kmsg after a reboot.
[jstultz: Moved persistent_ram.h to staging dir]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Equivalent functionality can be obtained with loglevel=15
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Early ramconsole is not very useful, an early crash will prevent
getting the logged data out on the next boot, and CONFIG_DEBUG_LL=y
will get the same information. Drop it to simplify a future
refactoring.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't store the bootinfo string and the ecc status string with
the recovered old log data. This will simplify refactoring the
persistent ram code out of the ram console code later.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want to ensure that we get all the console messages, even ones
that occur while the printing CPU is not yet online.
[jstultz: tweaked commit subject line]
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix compiler warning about the type of the module parameter.
Cc: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The lowmemorykiller registers an atomic notifier for notfication of when
the task is freed. From this atomic notifier callback, it removes the
atomic notifier via task_free_unregister(). This is incorrect because
atomic_notifier_chain_unregister() calls syncronize_rcu(), which can
sleep, which shouldn't be done from an atomic notifier.
Fix this by registering the notifier during init, and only unregister it
if the lowmemorykiller is unloaded.
Rebased to -next by Paul E. McKenney.
Rebased to -next again by Anton Vorontsov.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Christian Bejram <christian.bejram@stericsson.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GCC warns that module_param_named() indirectly returns a bool type value
which is different from 'int' type binder_debug_no_lock declared. Change
it to bool because it is a internal switch for debugging.
Signed-off-by: Zhengwang Ruan <ruan.zhengwang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The readers list is traversed under the log->mutex lock
(for example from fix_up_readers()), but the deletion of
elements from this list is not being done under this lock.
Cc: Brian Swetland <swetland@google.com>
Cc: Dima Zavin <dima@android.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Stephen Rothwell reported that the following commit broke the
linux-next build:
1fd36adcd98c: Replace the fd_sets in struct fdtable with an array of unsigned longs
Fix places where ->fds_bits needed to be removed as the core
kernel no longer uses fd_set internally for file descriptor
table management. There are two places:
(1) drivers/staging/android/binder.c
(2) arch/mips/kernel/kspd.c
Question: Should sp_cleanup() in the MIPS arch be using find_next_bit()
or fls()?
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ralf Bächle <ralf@linux-mips.org>
cc: Arve Hjønnevåg <arve@android.com>
Link: http://lkml.kernel.org/r/20120224105707.32170.11550.stgit@warthog.procyon.org.uk
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Wrap accesses to the fd_sets in struct fdtable (for recording open files and
close-on-exec flags) so that we can move away from using fd_sets since we
abuse the fd_set structs by not allocating the full-sized structure under
normal circumstances and by non-core code looking at the internals of the
fd_sets.
The first abuse means that use of FD_ZERO() on these fd_sets is not permitted,
since that cannot be told about their abnormal lengths.
This introduces six wrapper functions for setting, clearing and testing
close-on-exec flags and fd-is-open flags:
void __set_close_on_exec(int fd, struct fdtable *fdt);
void __clear_close_on_exec(int fd, struct fdtable *fdt);
bool close_on_exec(int fd, const struct fdtable *fdt);
void __set_open_fd(int fd, struct fdtable *fdt);
void __clear_open_fd(int fd, struct fdtable *fdt);
bool fd_is_open(int fd, const struct fdtable *fdt);
Note that I've prepended '__' to the names of the set/clear functions because
they require the caller to hold a lock to use them.
Note also that I haven't added wrappers for looking behind the scenes at the
the array. Possibly that should exist too.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120216174942.23314.1364.stgit@warthog.procyon.org.uk
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
|
|
/proc/pid/oom_adj is deprecated and will be removed in August 2012
according to Documentation/feature-removal-schedule.txt. Convert its
usage in the lowmemorykiller to use the new interface, oom_score_adj,
instead.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This was done to resolve some merge issues with the following files that
had changed in both branches:
drivers/staging/rtl8712/rtl871x_sta_mgt.c
drivers/staging/tidspbridge/rmgr/drv_interface.c
drivers/staging/zcache/zcache-main.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Older out of tree drivers that were desgined to the Android Alarm
in-kernel API may not build due to the namespace collision fixed in
an earlier patch. Per Arve's suggestion, this patch provides
preprocessor macros that allow older drivers to build.
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following warnings:
drivers/staging/android/alarm.c: In function ‘alarm_timer_triggered’:
drivers/staging/android/alarm.c:344: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘long int’
drivers/staging/android/alarm.c:367: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘long int’
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It was using ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK as an
index.
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
CC: JP Abgrall <jpa@google.com>
Change-Id: I919860cc71254453e382616bce9fd5455802cb3d
Signed-off-by: JP Abgrall <jpa@google.com>
[jstultz: Tweaked commit subject]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reprogrammed
If an alarm was restarted with a value that moved it away from the head
of a queue, the hrtimer would not be updated. This would cause unnecessary
wakeups.
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Change-Id: If379f8dd92b0bdb3173bd8d057adfe0dc1d15259
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Do not enable Android alarm driver by default
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
CC: Praneeth Bajjuri <praneeth@ti.com>
Change-Id: Iff8f7a65c4eceecfd084074937c72824697b5e7f
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
[jstultz: tweaked commit subject & msg]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that it builds, re-enable android alarm driver in
the makefile and kconfig
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow Android alarmtimer device to build while wakelocks are still
out of tree.
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The upstreamed alarmtimers are similar but not quite 100% API
compatibile with the android in-kernel alarm api. To aid the
transition, prefix the the android in-kernel api with android_
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The file asm/mach/time.h doesn't exist on all arches,
so include <linux/time.h>. Also linux/sysdev.h is gone
so kill it.
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add module.h includes required to build
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
CC: Andy Green <andy.green@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
[jstultz: Tweaked commit subject, folded two patches
into one]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove references to non-existant save_time_delta.
Change-Id: Iaefeca497de02fe36b7f5d79075912f6e349ec53
CC: Arve Hjønnevåg <arve@android.com>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
[Added commit message -jstultz]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
