Age | Commit message (Collapse) | Author |
|
Delete unused "pVBInfo" parameters from internal functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delete unused "HwDeviceExtension" parameters from internal functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move XGI_GetVBType call inside InitTo330Pointer to avoid code duplication.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactor XGI_BridgeIsOn(). IF_DEF_LVDS bit is not valid for < XG20 chips.
Also we can make the function static by moving it to vb_init.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code now contains several dead assignments which are shadowed by
another assignment a few lines later.
-> This patch removes them (and possibly associated code).
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If temp <= 2 no other bits than the lowest two (0x03) can be set anyway
-> this operation can be removed.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
XGINew_GetXG21Sense
Instead of calling xgifb_reg_and_or with almost identical parameters in
a simple if/else scenario, we assign the changing parameter to a temp
variable and call xgifb_reg_and_or only from one location.
-> Easier to read, easier to understand (especially wrt the line breaks)
(For the if condition we don't need the Temp variable, so we can use the
value directly).
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The switch statement sets the temp value to zero for certain cases and
leaves it untouched for other cases -> all these other cases can be
combined in the default case.
Since an empty case containing only a break, it can be removed.
The patch also removes the if statement, as it uses the same value as the switch
for comparison, and includes the code into the switch.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of storing the value in a temp variable, anding it with 1 and
assign data conditionally we can assign the value directly.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since we are programming SR register 18, better name structs/arrays
accordingly to avoid confusion.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since we only access the third row, we can delete the others.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SR1B register value is always 3 regardless of video card or RAM type.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Inside vb_init, IF_DEF_LVDS tells only if the vbios was succesfully read
on XG21. Rearrange the code so that we don't need to set or care about
this flag.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
IF_DEF_LVDS can be set only on XG21.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both functions xgifb_reg_get and inb return an u8 value, so we don't
need to cast their return value to unsigned char.
-> remove the cast
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MCLKData does not contain any 0x1C value for its field SR28 nor does
XGI340_ECLKData contain any 0x1C or 0x22 value for its field SR2E.
-> the statement always evaluates to false.
-> remove
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pVBInfo->ram_type is assigned the return value of
XGINew_GetXG20DRAMType which can only be 0, 1 or 2
-> The conditional assignment is not needed here as it always evaluates
to true.
-> remove
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After the patch
'staging/xgifb: Don't write the same values x times'
the local variable i is unused, which leads to the following warning:
driverrs/staging/xgifb/vb_init.c: In function
‘XGINew_SetDRAMDefaultRegister340’:
drivers/staging/xgifb/vb_init.c:433:43: warning: unused variable ‘i’
[-Wunused-variable]
This patch fixes this
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With the previous patch 'Move duplicated code for dram to helper
function' it becomes evident that the code is performing the same
thing 4 or 8 times in a row without changing arguments to the function
and thus writing the same values over and over again.
It was tested that these repeats are unnecessary.
-> we can safely remove them.
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
XGINew_SetDRAMDefaultRegister340 uses the same code fragment 4 times
with only a slight variation each time.
-> Move this code to a helper function - this saves some lines and
~450bytes in the .o / .ko
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The XGI340_CR6B lookup table consists of the entries
{0xaa, 0xaa, 0xaa, 0xaa} for an index <= 2 and
{0x00, 0x00, 0x00, 0x00} for all other indices.
The only user XGINew_SetDRAMDefaultRegister340 loops over these 4 values
of a line with a for loop and since all entries are the same for each line
we can simply replace the whole lookup table with a simple if/else assignment.
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delete redundant field.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pre-calculated register addresses instead of pVBInfo->BaseAddr.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Avoid copy-paste and use XGIRegInit() to initialize registers addresses.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Access XGI340_AGPReg directly and make it const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Inline constant values that are used only once.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Access XGI340_CR6B directly and make it const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In-line constants that are used only once.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Access XGI340_ECLKData directly and make it const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Eliminate dummy zero read-only global data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver reconfigures DRAM size register to 8M (regardless what the
actual size was) once the init has been completed, overwriting the
correct value written during the early init. As a result if the driver
is unloaded and reloaded, the user will be limited to 8M video memory
and may lose some of the available video modes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delete unneeded flag.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a static checker fix and not something I can test. The intent
of the code here is to set some bit flags. For a logical OR the ">> 1"
shift wouldn't make a difference. So it should be using a bitwise OR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix small coding style warnings in several files.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove commented code and useless comments. Leave only those with relevant
hints to the code.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace pr_* calls with dev_* ones when the device structure is available.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add include files with function definitions to avoid sparse warnings.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace meaninful printks with pr_debug and remove useless ones.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch cleans up the vb_device_info struct and the related
functions.
The cleanup decreases the size of the compiled module by
about 10kB.
== Remove fields in vb_device_info that are never read: ==
pOutputSelect
pRGBSenseData
pRGBSenseData2
pVideoSenseData
pVideoSenseData2
pYCSenseData
pYCSenseData2
CR49
pXGINew_I2CDefinition
pCR2E
pCR2F
pCR46
pCR47
pCRD0
pCRDE
pSR40
pSR41
pCR47
=== Remove the corresponding 'constants' ===
XGI330_RGBSenseData
XGI330_RGBSenseData2
XGI330_VideoSenseData
XGI330_VideoSenseData2
XGI330_YCSenseData
XGI330_YCSenseData2
XGI330_CR49
XG40_I2CDefinition
XG21_CR2E
XG21_CR2F
XG21_CR46
XG21_CR47
XG27_CRD0
XG27_CRDE
XGI330_OutputSelect
== Remove 'constant fields' and replace constant value with #define ==
pSR07 = XGI330_SR07 -> 0x18
pSR1F = XGI330_SR1F -> 0
pSR23 = XGI330_SR23 -> 0xf6
pSR24 = XGI330_SR24 -> 0x0d
pSR33 = XGI330_SR33 ->0
pCRT2Data_1_2 = XGI330_CRT2Data_1_2 -> 0
pCRT2Data_4_D = XGI330_CRT2Data_4_D -> 0
pCRT2Data_4_E = XGI330_CRT2Data_4_E -> 0
pCRT2Data_4_10 = XGI330_CRT2Data_4_10 -> 0x80
pSR36 = XG27_SR36 -> 0x30
pCR8F = &XG27_CR8F -> 0x0C
pSR40 = XG27_SR40 -> 0x04
pSR41 = XG27_SR41 ->0x00
pSR31 = XGI330_SR31 -> 0xc0
pSR32 = XGI330_SR32 -> 0xc0
SR25 = XGI330_sr25 -> 0 (we only use XGI330_sr25[0])
== Constant fields with 'dead' code: ==
pSoftSetting is set to XGI330_SoftSetting = 0x30
-> if (*pVBInfo->pSoftSetting & SoftDRAMType) is never true since
SoftDRAMType = 0x80
-> if (*pVBInfo->pSoftSetting & ModeSoftSetting) is never true since
ModeSoftSetting = 0x04
--> remove the code, remove pSoftSetting, remove XGI330_SoftSetting
pDVOSetting is set to XG21_DVOSetting = 0
-> if (((*pVBInfo->pDVOSetting) & 0xC0) == 0xC0) is never true
--> remove the code, remove pDVOSetting, remove XG21_DVOSetting
pXGINew_DRAMTypeDefinition is set to &XG40_DRAMTypeDefinition 0xFF
-> if (*pVBInfo->pXGINew_DRAMTypeDefinition != 0x0C) is always true
--> remove the if and remove pXGINew_DRAMTypeDefinition
remove XG40_DRAMTypeDefinition
== Replace pointer to unsigned char with unsigned char variable
and assign value of referenced pointer: ==
pSR21 -> SR21, remove XGI330_SR21
pSR22 -> SR22, remove XGI330_SR22
pXGINew_CR97 -> XGINew_CR97, remove XG20_CR97, XG27_CR97 and Z11m_CR97
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the first three entries in XGINew_DDRDRAM_TYPE{340,20} are never
used, we can simply remove them;
and instead of passing XGINew_DDRDRAM_TYPE with an index we can simply
pass the value directly to XGINew_SetDRAMSize20Reg.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the function XGINew_SetDRAMSizingType is only called from one
location and consist only of 2 valuable lines we can simply inline it
here.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since XGINew_SetDRAMSize20Reg now handles both cases we can remove
the code duplication in XGINew_DDRSizing340.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch consolidates the almost identical functions
XGINew_SetDRAMSizeReg and XGINew_SetDRAMSize20Reg as they are
implemented identically except one division factor.
The changed factor is now reflected in the input data.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes all unnecessary, redundant and superfluous header
includes from xgifb.
Tested on hp t5325 (XGI Z11)
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This resolves the conflict in:
drivers/staging/vt6656/ioctl.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
XG_41 is not listed in xgifb_pci_table, so the code can be safely dropped.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
XGIfb driver transfers integer port number through several typecasts via
pjIOAddress field. Drop that field completely and use vga_base field of
xgifb_info directly.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Image on Z11m cards was totally garbled due to wrong memory being
selected. Add a special handling for Z11m cards. Tested on PCIe Z11 and
Z11m cards.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|