| Age | Commit message (Collapse) | Author |
|---|
|
Since all read/write operations are in TDM are channel based, polling on TDM channel
for data instead of TDM port before going for read/write.
Also corrected a faulty error leg.
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
(cherry picked from commit 304c5cc5f167d1ac8990e36579cc2f87851f0cdd)
Change-Id: I5c0ec540c0db8e538e2b650ac0a0d5bdffaca336
Reviewed-on: http://git.am.freescale.net:8181/1159
Reviewed-by: Xu Jiucheng-B37781 <Jiucheng.Xu@freescale.com>
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
This is a small test module to transfer and receive data via tdm.
It also supports zarlink LM card phone call.
Signed-off-by: Jiucheng Xu <Jiucheng.Xu@freescale.com>
Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Change-Id: I47396d43b37e31e8de926af353dadfdaf637f13f
Reviewed-on: http://git.am.freescale.net:8181/906
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
The patch enable Freescale PQ-MDS-T1 card to work in T1 or E1 mode.
This card is connected to the board by PMC socket, it aslo supports
Line Module extended e.g. zarlink,le88266, we can use
"fsl,card_support" in dts to select which module you want.
Signed-off-by: Jiucheng Xu <Jiucheng.Xu@freescale.com>
Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Change-Id: I3f39fed84e137f7a19859935dbf71fac01330b47
Reviewed-on: http://git.am.freescale.net:8181/905
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Tdm core exported the simple function interfaces for user in kernel space.
Signed-off-by: Jiucheng Xu <Jiucheng.Xu@freescale.com>
Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Change-Id: Ifc8ef6b14f7cbc3c88fcfc5e4a1afd59564d8059
Reviewed-on: http://git.am.freescale.net:8181/904
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
This patch enabled UCC as transparent controller, working in continue
mode, and enabled TSA A/B/C/D ports to send and receive data from UCC.
This TDM function can transfer and receive data at different time slot
based on tdm dts setting. Different UCC and TSA port can be binded to
one TDM based on dts.
Change-Id: I0da63966c82ca7da8e6bfc5fbb37f54596aef52a
Signed-off-by: Jiucheng Xu <Jiucheng.Xu@freescale.com>
Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/903
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
- Basic driver which does minimum intialization of the Le88266 SLIC device.
- The code was originally borrowed from Zarlink driver implementation.
- It is not full fledged SLIC driver code, it just does basic
initialization which is required to setup a voice data path between
channels. This is just enough to test and demonstrate TDM functionality
on Freescale platforms using TDM Test Module.
- For full fledged VoIP type of use case proper SLIC driver will be required
which handles all the functionalities of the device.
- Going forward this driver will be replaced by Opoen source Zarlink APIs.
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
(cherry picked from commit abd929c8081a0e474291d79adf837aaa3a61e6ca)
|
|
This is a small test module to transfer and receive data via tdm.
Registers with the TDM core and sets up a TDM voice path
between two TDM channels.
It support voice path demo using Le88266 SLIC device.
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
(cherry picked from commit 52b6596fda27efe53a5cfe15b03f2f21bb86ddf7)
|
|
Freescale TDM controller consists of a TDM module supporting 128 channels
running at up to 50 Mbps with 8-bit and 16-bit word size. The TDM bus connects
gluelessly to most T1/E1 frames as well as to common buses such as the H.110,
SCAS, and MVIP. TDM also supports an I2S mode. The TDM module operates in
independent or shared mode when receiving or transmitting data.
This controller is available on MPC8315, P1010, P1020, P1022 and P1024 Freescale SOCs.
The driver registers itself with the TDM Framework & provides TDM functionality to the client modules.
In its present form this driver supports only channelised mode.
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
(cherry picked from commit 57b6d03a57174529a6b1cf26e5dac2a2d8ede5e6)
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
(cherry picked from commit 4ffa44272e2c1bdbbdd60efc0f033cfab4338f9d)
|
|
TDM Framework is an attempt to provide a platform independent layer which can offer a standard interface for TDM access to different client modules.
Beneath, the framework layer can house different types of TDM drivers to handle various TDM devices, the hardware intricacies of the devices being completely taken care by TDM drivers.
This framework layer will allow any type of TDM device to hook with it.
For example Freescale controller as on MPC8315, UCC based TDM controller, etc
The main functions of this Framework are:
- provides interface to TDM clients to access TDM functionalities.
- provides standard interface for TDM drivers to hook with the framework.
- handles various data handling stuff and buffer management.
In future this Framework will be extended to provide Interface for Line control devices also. For example SLIC, E1/T1 Framers etc.
Presently the framework supports only Single Port channelised mode.
Also the configurability options are limited which will be extended later on.
Only kernel mode TDM clients are supported currently. Support for User mode clients will be added later.
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
(cherry picked from commit e327099dbad92d21d54c92b9ab8a860f5fbcb636)
|
