summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2012-05-02Merge tag 'tty-3.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull a TTY fix from Greg Kroah-Hartman: "This is a deadlock bugfix that was easy to hit, and that the vt layer lock rework got wrong, so it reverts the logic back to the way it was in 3.3 and earlier kernels to prevent problems." * tag 'tty-3.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Fix deadlock on scroll-lock
2012-05-01vt: Fix deadlock on scroll-lockAlan Cox
Fixing the locking accidentally replaced a race in the scroll lock handling with a deadlock. Turn it back into a race for now. The basic problem is that there are two paths into the tty stop/start helpers. One via the tty layer ^S/^Q handling where we need to take the kbd_event_lock and one via the special keyboard handler for fn_hold where we already hold it. Probably we need to split out into a separate LED lock but for now just go back to the race as it's a bit close to release. Reported-by: Clemens Ladisch <clemens@ladisch.de> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30tty/serial/pmac_zilog: Fix "nobody cared" IRQ messageLarry Finger
Following commit a79dd5a titled "tty/serial/pmac_zilog: Fix suspend & resume", my Powerbook G4 Titanium showed the following stack dump: [ 36.878225] irq 23: nobody cared (try booting with the "irqpoll" option) [ 36.878251] Call Trace: [ 36.878291] [dfff3f00] [c000984c] show_stack+0x7c/0x194 (unreliable) [ 36.878322] [dfff3f40] [c00a6868] __report_bad_irq+0x44/0xf4 [ 36.878339] [dfff3f60] [c00a6b04] note_interrupt+0x1ec/0x2ac [ 36.878356] [dfff3f80] [c00a48d0] handle_irq_event_percpu+0x250/0x2b8 [ 36.878372] [dfff3fd0] [c00a496c] handle_irq_event+0x34/0x54 [ 36.878389] [dfff3fe0] [c00a753c] handle_fasteoi_irq+0xb4/0x124 [ 36.878412] [dfff3ff0] [c000f5bc] call_handle_irq+0x18/0x28 [ 36.878428] [deef1f10] [c000719c] do_IRQ+0x114/0x1cc [ 36.878446] [deef1f40] [c0015868] ret_from_except+0x0/0x1c [ 36.878484] --- Exception: 501 at 0xf497610 [ 36.878489] LR = 0xfdc3dd0 [ 36.878497] handlers: [ 36.878510] [<c02b7424>] pmz_interrupt [ 36.878520] Disabling IRQ #23 From an E-mail exchange about this problem, Andreas Schwab noticed a typo that resulted in the wrong condition being tested. The patch also corrects 2 typos that incorrectly report why an error branch is being taken. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-20drivers/tty/amiserial.c: add missing tty_unlockJulia Lawall
tty_unlock is used on all other exits from the function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18pch_uart: Fix dma channel unallocated issueTomoya MORINAGA
This driver anticipates pch_uart_verify_port() is not called during installation. However, actually pch_uart_verify_port() is called during installation. As a result, memory access violation occurs like below. 0. initial value: use_dma=0 1. starup() - dma channel is not allocated because use_dma=0 2. pch_uart_verify_port() - Set use_dma=1 3. UART processing acts DMA mode because use_dma=1 - memory access violation occurs! This patch fixes the issue. Solution: Whenever pch_uart_verify_port() is called and then dma channel is not allocated, the channel should be allocated. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18ARM: clps711x: serial driver hungs are a result of call disable_irq within ISRAlexander Shiyan
Since 2.6.30-rc1 clps711x serial driver hungs system. This is a result of call disable_irq from ISR. synchronize_irq waits for end of interrupt and goes to infinite loop. This patch fix this problem. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-12Merge tag 'tty-3.4-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial fixes from Greg KH: "Here are some tty and serial fixes for 3.4-rc2. Most important here is the pl011 fix, which has been reported by about 100 different people, which means more people use it than I expected :) There are also some 8250 driver reverts due to some problems reported by them. And other minor fixes as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pch_uart: Add Kontron COMe-mTT10 uart clock quirk pch_uart: Fix MSI setting issue serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller" Revert "serial/8250_pci: init-quirk msi support for kt serial controller" tty/serial/omap: console can only be built-in serial: samsung: fix omission initialize ulcon in reset port fn() printk(): add KERN_CONT where needed in hpet and vt code tty/serial: atmel_serial: fix RS485 half-duplex problem tty: serial: altera_uart: Check for NULL platform_data in probe. isdn/gigaset: use gig_dbg() for debugging output omap-serial: Fix the error handling in the omap_serial probe serial: PL011: move interrupt clearing
2012-04-09pch_uart: Add Kontron COMe-mTT10 uart clock quirkMichael Brunner
Add UART clock quirk for the Kontron COMe-mTT10 module. The board has previously been called nanoETXexpress-TT, therefore this is also checked. As suggested by Darren Hart the comparison in this patch version is placed after the FRI2 checks to ensure it will also work with possible upcoming changes to the FRI2 firmware. This patch follows the patchset submitted by Darren Hart at commit a46f5533ecfc7bbdd646d84fdab8656031a715c6. Signed-off-by: Michael Brunner <mibru@gmx.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09pch_uart: Fix MSI setting issueTomoya MORINAGA
The following patch (MSI setting) is not enough. commit e463595fd9c752fa4bf06b47df93ef9ade3c7cf0 Author: Alexander Stein <alexander.stein@systec-electronic.com> Date: Mon Jul 4 08:58:31 2011 +0200 pch_uart: Add MSI support Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> To enable MSI mode, PCI bus-mastering must be enabled. This patch enables the setting. cc: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09serial/8250_pci: add a "force background timer" flag and use it for the "kt" ↵Dan Williams
serial port Workaround dropped notifications in the iir register. Register reads coincident with new interrupt notifications sometimes result in this device clearing the interrupt event without reporting it in the read data. The serial core already has a heuristic for determining when a device has an untrustworthy iir register. In this case when we apriori know that the iir is faulty use a flag (UPF_BUG_THRE) to bypass the test and force usage of the background timer. [stable: 3.3.x] Acked-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Reported-by: Nhan H Mai <nhan.h.mai@intel.com> Reported-by: Sudhakar Mamillapalli <sudhakar@fb.com> Tested-by: Nhan H Mai <nhan.h.mai@intel.com> Tested-by: Sudhakar Mamillapalli <sudhakar@fb.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller"Dan Williams
This reverts commit 448ac154c957c4580531fa0c8f2045816fe2f0e7. The semantic of UPF_IIR_ONCE is only guaranteed to workaround the race condition in the kt serial's iir register if the only source of interrupts is THRE (fifo-empty) events. An modem status event at the wrong time can again cause an iir read to drop the 'empty' status leading to a hang. So, revert this in preparation for using the existing "I don't trust my iir register" workaround in the 8250 core (UART_BUG_THRE). [stable: 3.3.x] Cc: stable <stable@vger.kernel.org> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Sudhakar Mamillapalli <sudhakar@fb.com> Reported-by: Nhan H Mai <nhan.h.mai@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09Revert "serial/8250_pci: init-quirk msi support for kt serial controller"Dan Williams
This reverts commit e86ff4a63c9fdd875ba8492577cd1ad2252f525c. This tried to enforce the semantics of one interrupt per iir read of the THRE (transmit-hold empty) status, but events from other sources (particularly modem status) defeat this guarantee. This change also broke 8250_pci suspend/resume support as pciserial_resume_ports() re-runs .init() quirks, but does not run .exit() quirks in pciserial_suspend_ports() leading to reports like: sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:16.3/msi_irqs' ...and a subsequent crash. The mismatch of init/exit at suspend/resume seems like a bug in its own right. [stable: 3.3.x] Cc: stable <stable@vger.kernel.org> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Sudhakar Mamillapalli <sudhakar@fb.com> Reported-by: Nhan H Mai <nhan.h.mai@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09tty/serial/omap: console can only be built-inArnd Bergmann
When the omap serial driver is built as a module, we must not allow the console driver to be selected, because consoles can not be loadable modules. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09serial: samsung: fix omission initialize ulcon in reset port fn()Kukjin Kim
Fix omission initialize ulcon in s3c24xx_serial_resetport(), reset port function in drivers/tty/serial/samsung.c. It has been happened from commit 0dfb3b41("serial: samsung: merge all SoC specific port reset functions") Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: stable <stable@vger.kernel.org> [3.3] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09printk(): add KERN_CONT where needed in hpet and vt codeKay Sievers
A prototype for kmsg records instead of a byte-stream buffer revealed a couple of missing printk(KERN_CONT ...) uses. Subsequent calls produce one record per printk() call, while all should have ended up in a single record. Instead of: ACPI: (supports S0 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0 It prints: ACPI: (supports S0 S5 ) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11 ) hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09tty/serial: atmel_serial: fix RS485 half-duplex problemSiftar, Gabe
On our custom board, we are using RS485 in half-duplex mode on an AT91SAM9G45. SER_RS485_RX_DURING_TX is not set as we do not want to receive the data we transmit (our transceiver will receive transmitted data). Although the current driver attempts to disable and enable the receiver at the appropriate points, incoming data is still loaded into the receive register causing our code to receive the very last byte that was sent once the receiver is enabled. I ran this by Atmel support and they wrote: "The issue comes from the fact that you disable the PDC/DMA Reception and not the USART Reception channel. In your case, the[n] you will still receive data into the USART_RHR register, and maybe you [h]ave the overrun flag set. So please disable the USART reception channel." The following patch should force the driver to enable/disable the receiver via RXEN/RXDIS fields of the USART control register. It fixed the issue I was having. Signed-off-by: Gabe Siftar <gabe.siftar@getingeusa.com> [nicolas.ferre@atmel.com: slightly modify commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09tty: serial: altera_uart: Check for NULL platform_data in probe.Yuriy Kozlov
Follow altera_jtag_uart. This fixes a crash if there is a mistake in the DTS. Signed-off-by: Yuriy Kozlov <ykozlov@ptcusa.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09omap-serial: Fix the error handling in the omap_serial probeShubhrajyoti D
The patch does the following - The pm_runtime_disable is called in the remove not in the error case of probe.The patch calls the pm_runtime_disable in the error case. - Calls pm_runtime_put in the error case. - The up is not freed in the error path. Fix the memory leak by using devm_* so that the memory need not be freed in the driver. - Also the iounmap is not called fix the same by calling using devm_ioremap. - Make the name of the error tags more meaningful. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-07Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver serial: sh-sci: use serial_port_in/out vs sci_in/out. sh: vsyscall: Fix up .eh_frame generation. sh: dma: Fix up device attribute mismatch from sysdev fallout. sh: dwarf unwinder depends on SHcompact. sh: fix up fallout from system.h disintegration.
2012-04-06serial: PL011: move interrupt clearingLinus Walleij
Commit 360f748b204275229f8398cb2f9f53955db1503b "serial: PL011: clear pending interrupts" attempts to clear interrupts by writing to a yet-unassigned memory address. This fixes the issue. The breaking patch is marked for stable so should be carried along with the other patch. Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: stable <stable@vger.kernel.org> Cc: Nicolas Pitre <nico@fluxnic.net> Reported-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05sysrq: use SEND_SIG_FORCED instead of force_sig()Anton Vorontsov
Change send_sig_all() to use do_send_sig_info(SEND_SIG_FORCED) instead of force_sig(SIGKILL). With the recent changes we do not need force_ to kill the CLONE_NEWPID tasks. And this is more correct. force_sig() can race with the exiting thread, while do_send_sig_info(group => true) kill the whole process. Some more notes from Oleg Nesterov: > Just one note. This change makes no difference for sysrq_handle_kill(). > But it obviously changes the behaviour sysrq_handle_term(). I think > this is fine, if you want to really kill the task which blocks/ignores > SIGTERM you can use sysrq_handle_kill(). > > Even ignoring the reasons why force_sig() is simply wrong here, > force_sig(SIGTERM) looks strange. The task won't be killed if it has > a handler, but SIG_IGN can't help. However if it has the handler > but blocks SIGTERM temporary (this is very common) it will be killed. Also, > force_sig() can't kill the process if the main thread has already > exited. IOW, it is trivial to create the process which can't be > killed by sysrq. So, this patch fixes the issue. Suggested-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-04serial/sunzilog: fix keyboard on SUN SPARCstationSam Ravnborg
The keyboard on my SUN SPARCstation 5 no longer worked. The culprint was: d4e33fac2408d37f7b52e80ca2a89f9fb482914f ("serial: Kill off NO_IRQ") Fix up logic for no irq / irq so the keyboard works again. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-30Documentation: remove references to /etc/modprobe.confLucas De Marchi
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-30serial: sh-sci: use serial_port_in/out vs sci_in/out.Paul Mundt
Follows the 8250 change for pretty much the same rationale. See commit "serial: use serial_port_in/out vs serial_in/out in 8250". Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-30Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH updates from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (25 commits) sh: Support I/O space swapping where needed. sh: use set_current_blocked() and block_sigmask() sh: no need to reset handler if SA_ONESHOT sh: intc: Fix up section mismatch for intc_ack_data sh: select ARCH_DISCARD_MEMBLOCK. sh: Consolidate duplicate _32/_64 unistd definitions. sh: ecovec: switch SDHI controllers to card polling sh: Avoid exporting unimplemented syscalls. sh: add platform_device for RSPI in setup-sh7757 SH: pci-sh7780: enable big-endian operation. serial: sh-sci: fix a race of DMA submit_tx on transfer sh: dma: Collect up CHCR of SH7763, SH7764, SH7780 and SH7785 sh: dma: Collect up CHCR of SH7723 and SH7730 sh/next: Fix build fail by asm/system.h in asm/bitops.h arch/sh/drivers/dma/{dma-g2,dmabrg}.c: ensure arguments to request_irq and free_irq are compatible sh: cpufreq: Wire up scaling_available_freqs support. sh: cpufreq: notify about rate rounding fallback. sh: cpufreq: Support CPU clock frequency table. sh: cpufreq: struct device lookup from CPU topology. sh: cpufreq: percpu struct clk accounting. ...
2012-03-29Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull a few more things for powerpc by Benjamin Herrenschmidt: - Anton's did some recent improvements to EPOW event reporting on pSeries (power supply failures and such). The patches are self contained enough and replace really nasty code so I felt it should still go in - I did the vio driver registration change Greg requested, I don't see the point of leaving that til the next merge window - The remaining EEH changes I said were still pending to get rid of the EEH references from the generic struct device_node - A few more iSeries removal bits - A perf bug fix on 970 * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/perf: Fix instruction address sampling on 970 and Power4 powerpc+sparc/vio: Modernize driver registration powerpc: Random little legacy iSeries removal tidy ups powerpc: Remove NO_IRQ_IGNORE powerpc/pseries: Cut down on enthusiastic use of defines in RAS code powerpc/pseries: Clean up ras_error_interrupt code powerpc/pseries: Remove RTAS_POWERMGM_EVENTS powerpc/pseries: Use rtas_get_sensor in RAS code powerpc/pseries: Parse and handle EPOW interrupts powerpc: Make function that parses RTAS error logs global powerpc/eeh: Retrieve PHB from global list powerpc/eeh: Remove eeh information from pci_dn powerpc/eeh: Remove eeh device from OF node
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28Disintegrate asm/system.h for SparcDavid Howells
Disintegrate asm/system.h for Sparc. Signed-off-by: David Howells <dhowells@redhat.com> cc: sparclinux@vger.kernel.org
2012-03-28Disintegrate asm/system.h for CRISDavid Howells
Disintegrate asm/system.h for CRIS. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> cc: linux-cris-kernel@axis.com
2012-03-28Disintegrate asm/system.h for ARMDavid Howells
Disintegrate asm/system.h for ARM. Signed-off-by: David Howells <dhowells@redhat.com> cc: Russell King <linux@arm.linux.org.uk> cc: linux-arm-kernel@lists.infradead.org
2012-03-28serial: sh-sci: fix a race of DMA submit_tx on transferYoshii Takashi
When DMA is enabled, sh-sci transfer begins with uart_start() sci_start_tx() if (cookie_tx < 0) schedule_work() Then, starts DMA when wq scheduled, -- (A) process_one_work() work_fn_rx() cookie_tx = desc->submit_tx() And finishes when DMA transfer ends, -- (B) sci_dma_tx_complete() async_tx_ack() cookie_tx = -EINVAL (possible another schedule_work()) This A to B sequence is not reentrant, since controlling variables (for example, cookie_tx above) are not queues nor lists. So, they must be invoked as A B A B..., otherwise results in kernel crash. To ensure the sequence, sci_start_tx() seems to test if cookie_tx < 0 (represents "not used") to call schedule_work(). But cookie_tx will not be set (to a cookie, also means "used") until in the middle of work queue scheduled function work_fn_tx(). This gap between the test and set allows the breakage of the sequence under the very frequently call of uart_start(). Another gap between async_tx_ack() and another schedule_work() results in the same issue, too. This patch introduces a new condition "cookie_tx == 0" just to mark it is "busy" and assign it within spin-locked region to fill the gaps. Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
2012-03-28powerpc+sparc/vio: Modernize driver registrationBenjamin Herrenschmidt
This makes vio_register_driver() get the module owner & name at compile time like PCI drivers do, and adds a name pointer directly in struct vio_driver to avoid having to explicitly initialize the embedded struct device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net>
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-27Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: driver specific updates" from Arnd Bergmann: "These are all specific to some driver. They are typically the platform side of a change in the drivers directory, such as adding a new driver or extending the interface to the platform. In cases where there is no maintainer for the driver, or the maintainer prefers to have the platform changes in the same branch as the driver changes, the patches to the drivers are included as well. A much smaller set of driver updates that depend on other branches getting merged first will be sent later. The new export of tegra_chip_uid conflicts with other changes in fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with the cleanup of the interrupt handling of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up aforementioned trivial conflicts. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver regulator: Remove bq24022 regulator driver rtc: sa1100: add OF support pxa: magician/hx4700: Convert to gpio-regulator from bq24022 ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ... Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/fuse.c drivers/rtc/rtc-sa1100.c
2012-03-25ARM: 7342/2: sa1100: prepare for sparse irq conversionRob Herring
In preparation to convert SA1100 to sparse irq, set .nr_irqs for each machine and explicitly include mach/irqs.h as needed. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-24Merge tag 'ia64-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull miscellaneous Itanium patches from Tony Luck. The conflicts in arch/ia64/hp/sim/simserial.c were due to patches to simserial that had alredy been included (with lots of further cleanups) in the serial tree. * tag 'ia64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: Documentation/kernel-parameters: remove inttest parameter [IA64] Fix ISA IRQ trigger model and polarity setting [IA64] Fix a couple of warnings for EXPORT_SYMBOL [IA64] Check return from device_register() in cx_device_register() [IA64] Fix warning from machine_kexec.c [IA64] simserial, bail out when request_irq fails [IA64] hpsim, initialize chip for assigned irqs [IA64] simserial, include some headers [IA64] hpsim, fix SAL handling in fw-emu [IA64] genirq fixup for SGI/SN [IA64] disable interrupts when exiting from ia64_mca_cmc_int_handler()
2012-03-23Merge tag 'pinctrl-for-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates for v3.4 from Linus Walleij (*): - Switches the PXA 168, 910 and MMP over to use pinctrl - Locking revamped - Massive refactorings... - Reform the driver API to use multiple states - Support pin config in the mapping tables - Pinctrl drivers for the nVidia Tegra series - Generic pin config support lib for simple pin controllers - Implement pin config for the U300 * tag 'pinctrl-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) ARM: u300: configure some pins as an example pinctrl: support pinconfig on the U300 pinctrl/coh901: use generic pinconf enums and parameters pinctrl: introduce generic pin config pinctrl: fix error path in pinconf_map_to_setting() pinctrl: allow concurrent gpio and mux function ownership of pins pinctrl: forward-declare struct device pinctrl: split pincontrol states into its own header pinctrl: include machine header to core.h ARM: tegra: Select PINCTRL Kconfig variables pinctrl: add a driver for NVIDIA Tegra pinctrl: Show selected function and group in pinmux-pins debugfs pinctrl: enhance mapping table to support pin config operations pinctrl: API changes to support multiple states per device pinctrl: add usecount to pins for muxing pinctrl: refactor struct pinctrl handling in core.c vs pinmux.c pinctrl: fix and simplify locking pinctrl: fix the pin descriptor kerneldoc pinctrl: assume map table entries can't have a NULL name field pinctrl: introduce PINCTRL_STATE_DEFAULT, define hogs as that state ... (*) What is it with all these Linuses these days? There's a Linus at google too. Some day I will get myself my own broadsword, and run around screaming "There can be only one". I used to be _special_ dammit. Snif.
2012-03-23Merge tag 'stable/for-linus-3.4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.
2012-03-22Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge first batch of patches from Andrew Morton: "A few misc things and all the MM queue" * emailed from Andrew Morton <akpm@linux-foundation.org>: (92 commits) memcg: avoid THP split in task migration thp: add HPAGE_PMD_* definitions for !CONFIG_TRANSPARENT_HUGEPAGE memcg: clean up existing move charge code mm/memcontrol.c: remove unnecessary 'break' in mem_cgroup_read() mm/memcontrol.c: remove redundant BUG_ON() in mem_cgroup_usage_unregister_event() mm/memcontrol.c: s/stealed/stolen/ memcg: fix performance of mem_cgroup_begin_update_page_stat() memcg: remove PCG_FILE_MAPPED memcg: use new logic for page stat accounting memcg: remove PCG_MOVE_LOCK flag from page_cgroup memcg: simplify move_account() check memcg: remove EXPORT_SYMBOL(mem_cgroup_update_page_stat) memcg: kill dead prev_priority stubs memcg: remove PCG_CACHE page_cgroup flag memcg: let css_get_next() rely upon rcu_read_lock() cgroup: revert ss_id_lock to spinlock idr: make idr_get_next() good for rcu_read_lock() memcg: remove unnecessary thp check in page stat accounting memcg: remove redundant returns memcg: enum lru_list lru ...
2012-03-22Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc merge from Benjamin Herrenschmidt: "Here's the powerpc batch for this merge window. It is going to be a bit more nasty than usual as in touching things outside of arch/powerpc mostly due to the big iSeriesectomy :-) We finally got rid of the bugger (legacy iSeries support) which was a PITA to maintain and that nobody really used anymore. Here are some of the highlights: - Legacy iSeries is gone. Thanks Stephen ! There's still some bits and pieces remaining if you do a grep -ir series arch/powerpc but they are harmless and will be removed in the next few weeks hopefully. - The 'fadump' functionality (Firmware Assisted Dump) replaces the previous (equivalent) "pHyp assisted dump"... it's a rewrite of a mechanism to get the hypervisor to do crash dumps on pSeries, the new implementation hopefully being much more reliable. Thanks Mahesh Salgaonkar. - The "EEH" code (pSeries PCI error handling & recovery) got a big spring cleaning, motivated by the need to be able to implement a new backend for it on top of some new different type of firwmare. The work isn't complete yet, but a good chunk of the cleanups is there. Note that this adds a field to struct device_node which is not very nice and which Grant objects to. I will have a patch soon that moves that to a powerpc private data structure (hopefully before rc1) and we'll improve things further later on (hopefully getting rid of the need for that pointer completely). Thanks Gavin Shan. - I dug into our exception & interrupt handling code to improve the way we do lazy interrupt handling (and make it work properly with "edge" triggered interrupt sources), and while at it found & fixed a wagon of issues in those areas, including adding support for page fault retry & fatal signals on page faults. - Your usual random batch of small fixes & updates, including a bunch of new embedded boards, both Freescale and APM based ones, etc..." I fixed up some conflicts with the generalized irq-domain changes from Grant Likely, hopefully correctly. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits) powerpc/ps3: Do not adjust the wrapper load address powerpc: Remove the rest of the legacy iSeries include files powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces init: Remove CONFIG_PPC_ISERIES powerpc: Remove FW_FEATURE ISERIES from arch code tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable powerpc/spufs: Fix double unlocks powerpc/5200: convert mpc5200 to use of_platform_populate() powerpc/mpc5200: add options to mpc5200_defconfig powerpc/mpc52xx: add a4m072 board support powerpc/mpc5200: update mpc5200_defconfig to fit for charon board Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board MAINTAINERS: Update PowerPC 4xx tree powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board powerpc: document the FSL MPIC message register binding powerpc: add support for MPIC message register API powerpc/fsl: Added aliased MSIIR register address to MSI node in dts powerpc/85xx: mpc8548cds - add 36-bit dts ...
2012-03-22mm, oom: force oom kill on sysrq+fDavid Rientjes
The oom killer chooses not to kill a thread if: - an eligible thread has already been oom killed and has yet to exit, and - an eligible thread is exiting but has yet to free all its memory and is not the thread attempting to currently allocate memory. SysRq+F manually invokes the global oom killer to kill a memory-hogging task. This is normally done as a last resort to free memory when no progress is being made or to test the oom killer itself. For both uses, we always want to kill a thread and never defer. This patch causes SysRq+F to always kill an eligible thread and can be used to force a kill even if another oom killed thread has failed to exit. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Pekka Enberg <penberg@kernel.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
2012-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-21tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectableStephen Rothwell
so remove the code that tests for it. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>