summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-09-06staging: rtl8192e: Fix smatch error in r8192E_phy.cLarry Finger
Smatch reports the following: CHECK drivers/staging/rtl8192e/r8192E_phy.c drivers/staging/rtl8192e/r8192E_phy.c +940 rtl8192_phy_SwChnlStepByStep(92) error: potential null derefence 'CurrentCmd'. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging: rtl8192e: Fix smatch warning in rtl819x_BAProc.cLarry Finger
Smatch outputs the following warning: CHECK drivers/staging/rtl8192e/rtl819x_BAProc.c drivers/staging/rtl8192e/rtl819x_BAProc.c +88 rtllib_ADDBA(12) warn: variable dereferenced before check 'ieee' As ieee cannot be NULL at this point, remove all such checks. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging: rtl8192e: Silence smatch info in r8192E_cmdpkt.cLarry Finger
Smatch outputs the following informational message: CHECK drivers/staging/rtl8192e/r8192E_cmdpkt.c drivers/staging/rtl8192e/r8192E_cmdpkt.c +419 cmpk_message_handle_rx(77) info: ignoring unreachable code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging: rtl8192e: Fix smatch warning in rtl_wx.cLarry Finger
Smatch reports the following warning: CHECK drivers/staging/rtl8192e/rtl_wx.c drivers/staging/rtl8192e/rtl_wx.c +262 r8192se_wx_set_radio(16) warn: inconsistent returns sem:&priv->wx_sem: locked (258) unlocked (262) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging: rtl8192e: Fix smatch info output for r8192E_dev.cLarry Finger
Smatch reports the following informational output: CHECK drivers/staging/rtl8192e/r8192E_dev.c drivers/staging/rtl8192e/r8192E_dev.c +2404 ActUpdateChannelAccessSetting(13) info: ignoring unreachable code. drivers/staging/rtl8192e/r8192E_dev.c +2404 ActUpdateChannelAccessSetting(13) info: ignoring unreachable code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging: rtl8192e: Fix smatch error and warning in rtl_core.cLarry Finger
Smatch shows the following errors: CHECK drivers/staging/rtl8192e/rtl_core.c drivers/staging/rtl8192e/rtl_core.c +600 rtl8192_qos_activate(7) warn: variable dereferenced before check 'priv' drivers/staging/rtl8192e/rtl_core.c +1345 rtl8192_init(40) warn: 'dev->irq' was not released on error drivers/staging/rtl8192e/rtl_core.c +2120 rtl8192_alloc_rx_desc_ring(43) error: potential null derefence 'entry'. drivers/staging/rtl8192e/rtl_core.c +3010 rtl8192_pci_probe(153) warn: 'pmem_start' was not released on error Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging: rtl8192e: Remove dead code involving MOVE_INTO_HANDLERLarry Finger
File rtl_core.c contains the statement "#define MOVE_INTO_HANDLER". As a result, everything inside an "ifndef MOVE_INTO_HANDLER" is dead code and can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06Staging: hv: Add support for >2 TB LUN in storage driver.Mike Sterling
If a LUN larger than 2 TB is attached to a Linux VM on Hyper-V, we currently report a maximum size of 2 TB. This patch resolves the issue in hv_storvsc. Thanks to Robert Scheck <robert.scheck@etes.de> for reporting the issue. Reported-by: Robert Scheck <robert.scheck@etes.de> Signed-off-by: Mike Sterling <mike.sterling@microsoft.com> Signed-off-by: K.Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio: ad7152: fix channel assignment for AD7153Michael Hennerich
In case the AD7153 is selected we need to make sure we provide channel info for the first capacitance input in both single ended and differential configuration. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7192: return len and fix out of range checkingMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7192: add temp_scale attribute, change module descriptionMichael Hennerich
Use KBUILD_MODNAME Fix indention style Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: reset device and setup irq before it is enabledMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: fix channel mapping for event enablesMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: introduce IIO_EVENT_CODE_EXTRACT_CHAN_TYPE and use ↵Michael Hennerich
accordingly Fix channel type handling Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: fix mask bit generationMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: don't swab results twice and introduce more register ↵Michael Hennerich
defines Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: Add regulator, reference voltage and scale handlingMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: Fix AD7291_T_SENSE_MASKMichael Hennerich
AD7291_T_SENSE_MASK must set bit-7. Change definition style. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: Fix typos, change kconfig description and file headerMichael Hennerich
Make clear the AD7291 is primarily an ADC, and not a temp sensor. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291: fix channel mappingMichael Hennerich
ideally in_voltageX_raw should map to AD7291 VINX. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:accel:adis16209: Fix double registration of in_incli0_indexMichael Hennerich
iio (null): tried to double register : in_incli0_index Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:imu: adis16400: Avoid using printk facilityMichael Hennerich
use dev_info() instead. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:imu:adis16400 cleanupsJonathan Cameron
a) remove irq is gpio requirement - No reason this needs to be true. b) use actual part name in info message rather than adis16400 in all cases. c) scrap use of IIO_CHAN to simplify move out of staging. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7291 bring into line with current abi + chan_spec conversion.Jonathan Cameron
Also add some locking. Some major changes to how this driver works. For voltage channels it is currently either in single read mode or in a monitor mode (events only). Could be much cleverer and allow reading of any channels that happend to be monitored, but haven't done that yet. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152: Fix differential channel return value and increase ↵Michael Hennerich
delay. In differential mode zero scale equals to 0x8000. Increase readout delay by 1ms. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152: Update sample rate, conversion time, digital filter ↵Michael Hennerich
handling Rename attribute, use sampling_frequency instead. Attribute now accepts values in Hz. Delay readout accordingly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152: Add proper lockingMichael Hennerich
Add proper locking. Consistently use indio_dev. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152: update scale handlingMichael Hennerich
Add scale_available attribute. fix ad7152_scale_table, values are not sorted descending. Use IIO_VAL_INT_PLUS_NANO, to increase granularity. Update scale handling accordingly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152: Miscellaneous fixes and touch-upMichael Hennerich
Remove unused define. Introduce cached SETUP variables. Wait until calibration finished. (Device returns to idle state) IIO_CHAN_INFO_CALIBSCALE_SEPARATE use proper scales. (range 1.0 to 1.99999) i2c_smbus word transactions expect low byte first, therefore swap bytes. CAPDIFF is bit in SETUP not CFG. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152: increase readability by introducing proper bit definesMichael Hennerich
Some other miscellaneous cleanup. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152 bring more into line with abi.Jonathan Cameron
Get rid of explicit writes to registers and conversion mode control. Couple of bits I'm unsure about. * Do calibration modes self reset when done? How do you tell they are done? * Should we poll the status register just to be sure we have a new conversion? All done sans hardware. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152 set correct number of channels for ad7153.Jonathan Cameron
Has been broken for some time. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7152 use smbus read / write functions + checkpatch fixesJonathan Cameron
This is fine IF I have read the data sheet correctly. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7150: Add support for the second interrupt strobe.Michael Hennerich
The AD7150 features two outputs that can be used as interrupt strobes to the host processor. In order to receive all events independently, both need to utilized. Update copyright notice. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7150: remove conversion mode handling.Michael Hennerich
The AD7150 family of devices power up in continues conversion mode. We can stay in this mode, unless power consumption becomes a real issue. Actually the event generation as well as the running average relies on continues conversion mode, so we better stay there. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:adc:ad7150: chan_spec conv + i2c_smbus commands + drop unused ↵Jonathan Cameron
poweroff timeout control. Minimal changes to code layout as going to do chan spec conversion shortly. Otherwise, there are numerous code sharing opportunities in here and abi elements that are uterly non compliant. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:dac:ad5791 chan spec conversion.Jonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio: Differential channel handling - use explicit flag rather than ↵Jonathan Cameron
types. Straight forward change in the core, but required some drivers to not use the IIO_CHAN macro as that doesn't allow setting this bit (and is going away anyway). Hence the churn. Tested on max1363 with a couple of supported parts. V2: differential bit in code got 7 bits and direction 1. Reversed that. Issue spotted by Michael - thanks! Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:add adaptive event types and missing extract_type macro.Jonathan Cameron
I'm not entirely sure this is the right way to go. Suggestions of other options welcome! Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio: Add capacitance type and average_raw chan info.Jonathan Cameron
These are both needed for CAPADCs Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:naming in the EV_BIT macro fix.Jonathan Cameron
Should always have been IIO_EV_DIR_MAX as that's what it actually controls. Also reduced the number to 4 as not yet seen a case needing more and this is not userspace visible anyway. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:attrs - make address a u64 to allow event codes to be used.Jonathan Cameron
Makes unusual event related attributes look a lot more like the core ones. V2: Make sure the utils that set these up can handle the codes. V3: rebase Reported-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio: rework of attribute registration.Jonathan Cameron
This set also includes quite a number of bug fixes of particularly remove functions. Necessary due to issue pointed out in Bart Van Assche's patch: docs/driver-model: Document device.groups V2: Rebase due to patch reordering. V3: Pull various error fixes and cleanups out into their own patches. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:events - new 64 bit code structure and push out drivers.Jonathan Cameron
This costs us nothing in event storage (as we are carrying a 64 bit timestamp in the structure) and gives us lots more room to play with. Also allows for more channels which some parts need. V2: Cleanup some loose ends (such as the switch with only one option now). Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio: Switch the channel masks to bitmaps so as to allow for more ↵Jonathan Cameron
channels. This is as light as possible on changes to current drivers. Some drivers make assumptions that their masks fit in a single long. Given they were previously working this is clearly valid if not tidy. The max1363 is an example where there should be no such assumptions. V2: Add the new ad5933 Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:various move default scan mask setting after ring register or removeJonathan Cameron
The scan mask will be dynamically assigned in register, so don't use it before that. In adis16260 I've moved it as I know this driver has userspace code. Same for sca3000 where it is cost free due to hardware buffer. Can do that for the others, but in theory userspace code should always have been checking these and setting them appropriately anyway! V2: Clear default mask out of adis16400 as reported by Michael Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Reported-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:scan element types: introduce endian description to the data format.Jonathan Cameron
If not set in chan_spec, cpu endianness used. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:Documentation sysfs-bus-iio add in and out prefixesJonathan Cameron
Also includes the inX -> in_voltageX and outX -> out_voltageX conversions. To keep lines short quite a lot of supressing of directories was needed. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio: ABI rework - add in_ or out_ prefix to channnelsJonathan Cameron
Also involves changing current inX outX to in_voltageX and out_voltageX V2: squash users of the IIO_CHAN_OUT macro and get rid of it. There are very few of these, so it is easier to fix them. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:various cleanup regulator use paths.Jonathan Cameron
No way iio_device_allocate or iio_device_unregister effected by regulators so copying tricks not needed. This is really about regularizing the layout of drivers. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v0.10.2 at 2024-10-24 07:01:03 (GMT)