summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-04-14ixgbe: make device_caps() genericEmil Tantilov
x540 has the same device capability word in the EEPROM as 82599. This patch renames ixgbe_get_device_caps_82599 to ixgbe_get_device_caps_generic, moves it to ixgbe_common.h and sets up the function pointer for x540. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: explicitly disable 100H for x540Emil Tantilov
100H is not supported on this HW, but the bit is set on the PHY. This can result in link at 100F when advertising only 1000F. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: add support for new HWEmil Tantilov
Add new device ID supported by ixgbe. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: fix semaphores in eeprom routines for x540Emil Tantilov
HW can upload EEPROM content from flash while in a middle of checksum calculation. Take NVM ownership for the whole process of checksum update. Call ixgbe_read_eerd_generic() and ixgbe_write_eewr_generic() directly to avoid double take of semaphores which leads to long loading times. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: cleanup short msleep's (<20ms) to use usleep_rangeDon Skidmore
Since msleep might not sleep for the desired amount when less than 20ms use usleep_range. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: fix 82599 KR downshift coexistence with LESM FW moduleEmil Tantilov
Disable KR to KX4/KX downshift on 82599 backplane devices when LESM (Link Establishment State Machine) is enabled in FW. Those features cannot co-exist as they both manipulate the same registers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phillip Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: move disabling of relaxed ordering in start_hw()Emil Tantilov
Relaxed ordering can lead to issues with some chipsets. This patch makes sure that it is disabled by default and not only when DCA is on. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: refactor common start_hw code for 82599 and x540Emil Tantilov
Factored out the common start_hw code into a new function ixgbe_start_hw_gen2() so that it can be used by x540 and 82599. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: update version string for Dell CEM useJeff Kirsher
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com>
2011-04-14ixgbe: fix namespacecheck issueEmil Tantilov
Set ixgbe_identify_82599() as static Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: correct function number for some 82598 partsEmil Tantilov
Some 82598 parts have LAN0 disabled and LAN1 enabled and the LAN ID bits in Device Status register report the NIC as having only LAN1 as enabled. This causes ixgbe_set_lan_id_multi_port_pcie() to set bus->func = 1 which is incorrect. Force bus->func to 0 when LAN0 is disabled in the EEPROM. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: fix return value checksEmil Tantilov
The value of status was incorrectly tested. Also whitespace cleanup. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14ixgbe: DCB, further cleanups to app configurationJohn Fastabend
With the app data on the kernel dcb_app list we no longer need to specifically handle them in ixgbe for the CEE case. So now we can remove app handling logic and check when the hw is configured if the app data matches the hardware configuration in set_hw_all(). If it does not match then we can reconfigure. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14e1000e: If ASPM L0s needs to be disabled, do it prior to enabling deviceBruce Allan
Based on a patch from Naga Chumbalkar <nagananda.chumbalkar@hp.com>: If ASPM L0s needs to be disabled due to HW errata, do it prior to "enabling" the device. This way if the kernel ever defaults its aspm_policy to POLICY_POWERSAVE, then the e1000e driver will get a chance to disable ASPM on the misbehaving device *prior* to calling pci_enable_device_mem(). This will be useful in situations where the BIOS indicates ASPM support on the server by clearing the ACPI FADT "ASPM Controls" bit. Note: The kernel (2.6.38) currently uses the BIOS "default" as its aspm_policy. However, Linux distros can diverge from that and set the default to "powersave". v2: o cleanup namespace pollution of e1000e_disable_aspm(), o fix type and initialization of the new aspm_disable_flag in a few functions, and o redefine FLAG2_DISABLE_ASPM_L0S to the first unused bit in adapter->flags2. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14e1000e: fix stats locking in e1000_watchdog_taskFlavio Leitner
Just move the unlock down a bit because it unlocks too early leaving a chance for get_stats64() run in parallel while it is still accessing the stats. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14e1000e: convert to new VLAN modelJeff Kirsher
This switches the e1000e driver to use the new VLAN interfaces. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
2011-04-14e1000e: PCIe link speed in GT/s, not GB/sBruce Allan
Correct the log message when driver loads. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14e1000e: convert short duration msleep() to usleep_range()Bruce Allan
With durations less than 20ms, the jiffies or legacy timer backed msleep() may sleep ~20ms which might not be what the caller expects. Instead, it is recommended to use the hrtimers backed usleep_range(). For more, see Documentation/timers/timers-howto.txt. Issues reported by checkpatch. In addition, remove unnecessary sleep in e1000e_write_nvm_spi(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14igb: introduce igb_thermal_sensor_event for sensor checkingStefan Assmann
The code for thermal sensor checking should be wrapped into a function. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14igb: fix typo in igb_validate_nvm_checksum_82580Stefan Assmann
Comment spelling fix. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-14net: allow shifted access in smsc911x V2Mathieu J. Poirier
This is a revised patch that permits a shifted access to the LAN9221 registers. More specifically: It adds a shift parameter in the platform_data. It introduces an ops in smsc911x_data. A choice of access function to use at run-time. Four new shifted access function. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14tg3: Add support for extended VPD blocksMatt Carlson
In some devices, the VPD block is relocated to a different area in NVRAM. The original location can still contain old, but still valid VPD data. This patch changes the code to look for an extended VPD block in NVRAM. If one is found, that block is used for all VPD operations instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14tg3: Add jumbo frame loopback tests to selftestMatt Carlson
This patch adds jumbo frame loopback test support to the ethtool selftest. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14tg3: Automatically size stat/test string arraysMatt Carlson
This patch reimplements the size preprocessor constants of the stats and ethtool test string arrays. The size is calculated at compile time rather than using static constants. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14tg3: Dump registers when status block shows errorsMatt Carlson
This patch monitors the error bit of the status word within the status block. If it is set, the driver will dump the driver state after validating the error and then reset the chip. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14tg3: Provide full regdump on tx timeoutMatt Carlson
The current amount of information provided in the output of a tx timeout is insufficient to determine a root cause. This patch replaces the terse, four-register status output with a more complete body of information. For PCIe devices, the full register space is dumped. For other devices, select registers are dumped instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13rndis_host: Poll status before control channel where necessaryBen Hutchings
Some RNDIS devices don't respond on the control channel until polled on the status channel. In particular, this was reported to be the case for the 2Wire HomePortal 1000SW and for some Windows Mobile devices. This is roughly based on a patch by John Carr <john.carr@unrouted.co.uk> which is currently applied by Mandriva. Reported-by: Mark Glassberg <vzeeaxwl@myfairpoint.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13stmmac: review Wol and enable the Unicast supportGiuseppe Cavallaro
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13macb: Add rx overrun counterAlexander Stein
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-04-12atm: iphase: Fix set-but-not-used warnings.David S. Miller
The "iavcc" and "iadev" cases are obvious. The intr_status and frmr_intr cases are reading a register to clear the chip status. This driver is pretty old and creaky, and uses volatile pointer dereferences to do register I/O when it should be using readl() and friends. However that it outside of the scope of these changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12net: ioc3: convert to hw_featuresMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12net: bnx2x: convert to hw_featuresMichał Mirosław
Since ndo_fix_features callback is postponing features change when bp->recovery_state != BNX2X_RECOVERY_DONE, netdev_update_features() has to be called again when this condition changes. Previously, ethtool_ops->set_flags callback returned -EBUSY in that case (it's not possible in the new model). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> v5: - don't delay set_features, as it's rtnl_locked - same as recovery process v4: - complete bp->rx_csum -> NETIF_F_RXCSUM conversion - add check for failed ndo_set_features in ndo_open callback v3: - include NETIF_F_LRO in hw_features - don't call netdev_update_features() if bnx2x_nic_load() failed v2: - comment in ndo_fix_features callback Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12net: bna: convert to hw_featuresMichał Mirosław
Note: looks like bnad->conf_mutex is duplicating rtnl_lock. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12net: ps3_gelic: convert to hw_featuresMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12net: sky2: convert to hw_featuresMichał Mirosław
Caveats: - driver modifies vlan_features on HW VLAN TX changes - broken RX checksum will be reenabled on features change Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/ath/ar9170/main.c drivers/net/wireless/ath/ar9170/phy.c drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
2011-04-12vxge: update driver versionJon Mason
Update vxge driver version to 2.5.3 Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12vxge: spin-lock issueJon Mason
In vxge_hw_vpath_close, __vxge_hw_vp_terminate memsets the vpath which clobbers the spin lock state, then the driver attempts to acquire the spin lock. Resolve this by not zeroing the lock part of vpath struct, clean-up vpath locking in init, close, and fix locking hole in fw_api call. Issue found by Bob Picco <bpicco@redhat.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12vxge: always enable hardware time stampJon Mason
Hardware time stamp calculation can only be enabled by the privileged function. Enable it always by default and simply use the ethtool interface to set a flag to indicate whether or not the respective function driver should indicate the timestamp along with the received packet. Also, make certain fields in vxge_hw_device_config bit-fields to reduce the size of the struct. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12s2io: Fix warnings due to -Wunused-but-set-variable.David S. Miller
Most of these are cases where we are trying to read back a register after a write to ensure completion. Simply pre-fixing the readl() or readq() with "(void)" is sufficient because these are volatile operations and the compiler cannot eliminate them just because no real assignment takes place. The case of free_rxd_blk()'s assignments to "struct buffAdd *ba" is a real spurious assignment as this variable is completely otherwise unused. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jon Mason <jdmason@kudzu.us>
2011-04-11niu: Fix warnings due to -Wunused-but-set-variableDavid S. Miller
Most of these were legitimate, and once case was a real bug (not propagating errors from ->xcvr_init() methods). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/smsc911x.c
2011-04-11niu: Recognise original ethtool class code for AH/ESP flow hashingBen Hutchings
When the RX network flow classification interface was originally defined for reporting and controlling of flow hashing, AH and ESP were not given distinct flow class codes (apparently because the Sun Neptune hardware treats them very similarly). For flow steering, they must be distinguished, so new and separate flow class codes were added for AH and ESP. But for backward- compatibility, flow hash operations should continue to support the original class codes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11gianfar: Clean up implementation of RX network flow classificationBen Hutchings
This code was cribbed from niu, so gfar_set_hash_opts() begins by converting the ethtool flow class code into a class code for Sun Neptune hardware, then does the same thing again for the hardware it's really dealing with. It may also return -1 (-EPERM) for some unhandled ethtool flow class codes. Remove the useless code and definitions, and fix the error code. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11qlge: use ethtool set_phys_idstephen hemminger
This is a stab at replacing old ethtool phys_id with set_phys_id on the Qlogic 10Gb driver. Compile tested only. Not sure if set_led_cfg will flash continuously, or needs to be replaced by ETHTOOL_ID_ON/ETHTOOL_ID_OFF Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11netxen: limit skb frags for non tso packetamit salecha
Machines are getting deadlock in four node cluster environment. All nodes are accessing (find /gfs2 -depth -print|cpio -ocv > /dev/null) 200 GB storage on a GFS2 filesystem. This result in memory fragmentation and driver receives 18 frags for 1448 byte packets. For non tso packet, fw drops the tx request, if it has >14 frags. Fixing it by pulling extra frags. Cc: stable@kernel.org Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11bonding:fix two typosPeter Pan(潘卫平)
replace relpy with reply. replace premanent with permanent. Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11net: fix tranmitted/tranmitting typoPeter Pan(潘卫平)
replace tranmitted with transmitted. replace tranmitting with transmitting. Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11bonding:delete unused rlb_interval_counterPeter Pan(潘卫平)
Now, alb_bond_info uses rx_ntt,rlb_update_delay_counter and rlb_update_retry_counter to decide when to call rlb_update_rx_clients(). Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-10-10 20:21:37 (GMT)