Age | Commit message (Collapse) | Author |
|
Set CSCN_TARG with correct DCP portal in qman_create_cgr_to_dcp()
funciton for the qman revision < qman_3.0
JIRA issue# QLINUX-3814
Signed-off-by: Haiying Wang <Haiying.wang@freescale.com>
|
|
Signed-off-by: Camelia Groza <camelia.groza@freescale.com>
|
|
Fix two compile errors below,
error: implicit declaration of function 'of_iomap'
error: implicit declaration of function 'out_be32'
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
|
|
It supports one critical trip point and one passive trip point.
The cpufreq is used as the cooling device to throttle CPUs when
the passive trip is crossed.
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
|
|
As per Documentation/thermal/sysfs-api.txt, max_level
is an index, not a counter. Thus, in case a CPU has
3 valid frequencies, max_level is expected to be 2, for instance.
The current code makes max_level == number of valid frequencies,
which is bogus. This patch fix the cpu_cooling device by
ranging max_level properly.
Reported-by: Carlos Hernandez <ceh@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The eSDHC is not compatible with SD spec well, so we need
to use eSDHC-specific code to switch to SDR50 mode.
1. IO signal voltage switching, eSDHC uses SDHC_VS to switch
io voltage and it's needed to configure a global utilities
register SCFG_SDHCIOVSELCR(if it has) and SDHC_VS signal.
2. Before executing tuning procedure, eSDHC should set its own
tuning block.
static const struct sdhci_ops sdhci_esdhc_ops = {
...
.set_tuning_block = esdhc_set_tuning_block,
.signal_voltage_switch = esdhc_signal_voltage_switch,
};
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
|
|
The eSDHC is not compatible with SD spec well, it's needed
to add callbacks for signal voltage switching and tuning
block setting for eSDHC for eMMC45 Adapter Card HS200 mode
support.
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
|
|
|
|
In order to ensure that the SEC ERA property is
properly read from DTS, of_property_read* functions need
to be used.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Horia Geantă <horia.geanta@freescale.com>
Change-Id: I3fe958ca9b0ab91c2dbd089d1b2f090042cc3fd0
Reviewed-on: http://git.am.freescale.net:8181/39374
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
HW coherency won't work properly for CAAM write transactions
if AWCACHE is left to default (POR) value - 4'b0001.
It has to be programmed to 4'b0010.
For platforms that have HW coherency support:
-PPC-based: the update has no effect; CAAM coherency already works
due to the IOMMU (PAMU) driver setting the correct memory coherency
attributes
-ARM-based: the update fixes cache coherency issues,
since IOMMU (SMMU) driver is not programmed to behave similar to PAMU
Change-Id: I1f91a526c0bdf28b799d19cab9599b115cad55b3
Signed-off-by: Horia Geantă <horia.geanta@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/39256
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
ls1021 support QE IP block and it is arm,
So modify QE-HDLC code to adapt bothe arm and powerpc
Signed-off-by: Zhao Qiang <B45475@freescale.com>
Change-Id: I9e02e53ae1fafffeec3bf7145309002db19c2dc1
Reviewed-on: http://git.am.freescale.net:8181/38130
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
This patch enables the SoC level CAN loopback.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Change-Id: I5efd40f5d853d11b2476b2bbab0db66c7b1711fa
Reviewed-on: http://git.am.freescale.net:8181/38097
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
This patch adds support for non RX-FIFO (legacy) mode in
the flexcan driver.
On certain SoCs, the RX-FIFO support might be broken, as
a result we need to fall-back on the legacy (non RX-FIFO)
mode to receive CAN frames.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com>
Change-Id: I8b07e851b68fcca9716d02b14b6712c2da654ad5
Reviewed-on: http://git.am.freescale.net:8181/38095
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
The FlexCAN IP on certain SoCs like (Freescale's LS1021A) is modelled
in a big-endian fashion, i.e. the registers and the message buffers are
organized in a BE way.
More details about the LS1021A SoC can be seen here:
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=LS1021A&nodeId=018rH325E4017B#
This patch ensures that the register read/write APIs are remodelled to
address such cases, while ensuring that existing platforms (where the
FlexCAN IP was modelled in LE way) do not break.
Tested on LS1021A-QDS board.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com>
Change-Id: I4116956dfc92ae565a2aea96356014c77f506c1c
Reviewed-on: http://git.am.freescale.net:8181/38094
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
This patch adds ls1021a flexcan device entry to the flexcan driver code.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Change-Id: Iad4f7caf7be878784414d194335f203ea02743e5
Reviewed-on: http://git.am.freescale.net:8181/38093
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
This reverts commit 61af51e63ff5a3666788b1c5c2d42c3df3a03c34.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Change-Id: I196e1fbc30a97ae0102b13eddd25bdf9230e02f4
Reviewed-on: http://git.am.freescale.net:8181/38091
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
This reverts commit 4966cbb525a2acfb7c2782f1994949e97b45f242.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Change-Id: Ifec4963a1ed01fb60f949575e1c2be4da5c38cf6
Reviewed-on: http://git.am.freescale.net:8181/38090
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
ERRATA ERR005829 handling'
This reverts commit 0ec580b6a604a4fcfd65c3515459def643c8517a.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Change-Id: I64fb32407f7083aa433d4d7ec34d7171c2bdc02b
Reviewed-on: http://git.am.freescale.net:8181/38089
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
Rather than wasting cycles read-modify-writing the interrupt enable
registers, cache the value locally instead.
This patch is from upstreaming linux, commit id
b537f94ce19583de1882f539a5cc49aa99260aca
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Change-Id: I3c1bb4d4b3f7d7dccbaa4748816bfe381edc484c
Reviewed-on: http://git.am.freescale.net:8181/37869
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Xiaobo Xie <X.Xie@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Change-Id: I68ac4e509f41c249d38579b34cb78d35e9231b0f
Reviewed-on: http://git.am.freescale.net:8181/37558
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
Enable interrupt mode to detect card instead of polling mode for
ls1021a by removing the quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION.
This could improve data transferring performance and avoid the call
trace caused by polling card status sometime.
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Change-Id: Id965cd89b16f3f4d8327f1ca3d7ba9ed146e7a44
Reviewed-on: http://git.am.freescale.net:8181/37819
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Xiaobo Xie <X.Xie@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
|
|
In LNI shaper setup, setting mps to 60 to round up the frame length
to 60 for shaper calculations, for any dequeued frame length less
than 60 bytes.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Change-Id: I88013d2ee39b3620a4e97f3366a87664ec0ea9dc
Reviewed-on: http://git.am.freescale.net:8181/37437
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Correct NULL pointer checking for endpoint descriptor
before it gets dereferenced
Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
Change-Id: I449d00d49f2ae842aa256907021b95b7885ccaf5
Reviewed-on: http://git.am.freescale.net:8181/37641
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Add the check whether malloc allocated memory successfully or not
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Change-Id: If306002aa8541cf76286b7b78d0027c3395672a6
Reviewed-on: http://git.am.freescale.net:8181/37576
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Stuart Yoder <stuart.yoder@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Make sure that map name is null terminated when a memory map
is split and is cleared when a map is destroyed
Signed-off-by: Roy Pledge <Roy.Pledge@freescale.com>
Change-Id: If779b54817b9c2d49d6e18106b333a51ca2b2dcf
Reviewed-on: http://git.am.freescale.net:8181/37436
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
On T1042D4RDB, system can't resume and warm reset to uboot prompt sometimes.
Disable eSPI controller hardware before enter deep sleep, and enable it
after resume.
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Change-Id: I0f091890ef3e3219697ff7f5bbf4a02809e6e45b
Reviewed-on: http://git.am.freescale.net:8181/37469
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
For improved performance in case of unbalanced flows, all
FQs from SEC to cores were added into a pool channel. Adverse
effects have been observed for e5500 platforms. This patch
removes the creation and subsequent usage of the pool channel.
Change-Id: I49dbb93bfede16985fa2ed451cde17e7c2658648
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/37366
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mircea Pop <mircea.pop@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Remove check added in previous patch to disallow size zero to be
passed from user space in dma_mem_create(). Size zero is deemed valid
if the memory region is already created and a second user wishes to
get a mapping to the existent memory.
Corrected values copied back to the user to include the length of the
memory and the flags. This is important to reflect a memory size
correction when the user passes size zero. The user can check the new
size using dma_mem_params()
Added a warning message if the user attempts to map to an existing
area in memory, but specifies a non-zero size that does not match the
original memory mapping. In the future this case will trigger an
error and the mapping will fail. Currently the behavior is to print a
warning message and the kernel passes back to user space the
corrected size.
Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com>
Change-Id: Ib8535ada6f0fb616986bce3c52eae65f3bf583da
Reviewed-on: http://git.am.freescale.net:8181/37365
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
|
|
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Change-Id: Ife4ad017add52bdd911b373d5d8dbb55a7e680ec
Reviewed-on: http://git.am.freescale.net:8181/37122
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
ARRAY_SIZE() returns a size_t value.
Thus, when printing these values, %zu or %zx must be used, or else
warnings show up:
CC drivers/crypto/caam//caamalg.o
In file included from include/linux/thread_info.h:11:0,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from include/linux/seqlock.h:35,
from include/linux/time.h:5,
from include/linux/stat.h:18,
from include/linux/module.h:10,
from drivers/crypto/caam//compat.h:9,
from drivers/crypto/caam//caamalg.c:47:
drivers/crypto/caam//caamalg.c: In function 'caam_cra_init':
include/linux/bug.h:33:45: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=]
#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
^
include/linux/compiler-gcc.h:47:28: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
^
include/linux/kernel.h:41:59: note: in expansion of macro '__must_be_array'
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
^
drivers/crypto/caam//caamalg.c:4396:13: note: in expansion of macro 'ARRAY_SIZE'
op_id, ARRAY_SIZE(digest_size));
^
CC drivers/crypto/caam//caamhash.o
In file included from include/linux/thread_info.h:11:0,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from include/linux/seqlock.h:35,
from include/linux/time.h:5,
from include/linux/stat.h:18,
from include/linux/module.h:10,
from drivers/crypto/caam//compat.h:9,
from drivers/crypto/caam//caamhash.c:56:
drivers/crypto/caam//caamhash.c: In function 'caam_hash_cra_init':
include/linux/bug.h:33:45: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=]
#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
^
include/linux/compiler-gcc.h:47:28: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
^
include/linux/kernel.h:41:59: note: in expansion of macro '__must_be_array'
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
^
drivers/crypto/caam//caamhash.c:1782:12: note: in expansion of macro 'ARRAY_SIZE'
op_id, ARRAY_SIZE(runninglen));
^
Signed-off-by: Horia Geantă <horia.geanta@freescale.com>
Change-Id: Ica005a337d654f7d55eea6f5e5aee911cbd016b2
Reviewed-on: http://git.am.freescale.net:8181/37071
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: I41397d36e3966e099e53d8d5c35b2fdbd27e2055
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36866
Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Change-Id: Iaaf60a7e20a7cd96698fbcb3f98b5918000872e1
Reviewed-on: http://git.am.freescale.net:8181/36225
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
This reverts commit 7b1b36aa677846919b11ef4befa211063ed45702.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Change-Id: Ie309215f0085b3c7624a337444f54c38ecc65d69
Reviewed-on: http://git.am.freescale.net:8181/29540
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Sandeep Malik <Sandeep.Malik@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36549
|
|
This reverts commit f2cb63dfbbc290dd37fb4a4272f4905104ea5ebb.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Change-Id: Id060915a002e4eabae23a521da4283eb447216ef
Reviewed-on: http://git.am.freescale.net:8181/29539
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Sandeep Malik <Sandeep.Malik@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36548
|
|
Tested with tcrypt on p1023rdb platform.
Change-Id: Ic19a8d2ed5ce3603d2d9f893736b68eea03d480b
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36220
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Make sure the SPI Flash into reset state.
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Change-Id: I627606256571b80ba80a5a84a25b52685e799b0c
Reviewed-on: http://git.am.freescale.net:8181/36725
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
slab_scr_128b should be checked for NULL.
Signed-off-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com>
Change-Id: I51f5b7c96fbee9a0f1baf2340ff97b23caed434e
Reviewed-on: http://git.am.freescale.net:8181/36649
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
bufs passed as NULL and dereferenced. Replaced with local variable.
Signed-off-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com>
Change-Id: I39aecee95b086567a21487ee2b751126aa0777f1
Reviewed-on: http://git.am.freescale.net:8181/36648
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
is_power_of_2 is a Linux function that takes unsigned long. it was
used by our new function is_power_of_4 which takes u64. Trucation
is possible because unsigned long is 32 bits wide in 32 bit
applications. This patch removes the dependancy on is_power_of_2 to
solve this issue
Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com>
Change-Id: I5939e7e6457e07e9355ba54fef80a7bc71c3a64b
Reviewed-on: http://git.am.freescale.net:8181/36609
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Add BUG_ON to prevent NULL dereference if ctx->flags indicate flow
mode (none direct mode) then a call back token must be specified
otherwise the call back token can be passed NULL
Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com>
Change-Id: I20f95b2fd77699eb32ef54515666127ebc6b1743
Reviewed-on: http://git.am.freescale.net:8181/36607
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Reviewed-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
The problem will occur only in T1040R1. A workaround
has been verified; set a Scatter Gather (SG) flag
on the Q or G Pointers on KPG, which will give
the PKHA unload time to complete. It's sufficient
to have the SG flag set for only one of these.
Change-Id: I5a403576c6e995110227872c84de7e74da0144c5
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36617
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Corrections to struct qm_mcr_ceetm_ccgr_query to match block guide
Corrections to qman_ceetm_cscn_dcp_get() bit manipulation to match
bit order in block guide
Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com>
Change-Id: I78d730263495358c29be766933aceae9d5b36326
Reviewed-on: http://git.am.freescale.net:8181/36407
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com>
Reviewed-by: Roy Pledge <roy.pledge@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: Id5ecb2f85caea934dc3de2b69e538af45316e14f
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36567
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
In order to process TLS data that is received in
network byte order, a swap is needed for a SEC
block working in little endian mode. This is done
by using the MOVEB command.
Change-Id: I8290ad7348d9e66169c05eff8bda71e587beb0a9
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36369
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
CHAs of SEC work natively in BE mode. When moving
data to the alignment blocks, swapping is needed
for LE platforms. This is done by means of the MOVEB
command (introduced in ERA 7). This patch adds support
to DCL for this command.
Change-Id: Ie74f2d8a1cf101acd5a23686ff8eb835d1a1f047
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36365
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Tested with tcrypt on bsc9132qds platform.
Change-Id: Ia8a58b786779e00b267ad3cd2fa05b30d5e17bfb
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36219
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
An implicit truncation is done when using a variable of 64 bits
in MATH command:
warning: large integer implicitly truncated to unsigned type [-Woverflow]
Silence the compiler by feeding it with an explicit truncated value.
Change-Id: I95e3f397f62f9b850c0c7f26e7079b9d9688b87e
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36218
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Change-Id: Ib662fba72d3ad0e5260bcc36006fa0dd7158b056
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/36405
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Nir Erez <nir.erez@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
The function "dpa_ipsec_free" is calling "free_resources" which
is releasing the dpa_ipsec instance by executing
kfree(dpa_ipsec);
Once this call ends, "dpa_ipsec_free" is accessing again the
"instance" pointer to call "mark_unused_gbl_dpa_ipsec". The problem
is that the "instance" pointer is inconsistent at his point (was
released by the call to "free_resources").
To fix this, the call to "mark_unused_gbl_dpa_ipsec" was simply
removed from "dpa_ipsec_free" because the function "free_resources"
is already doing that.
Signed-off-by: Marian Chereji <marian.chereji@freescale.com>
Change-Id: Ibabc69253a8a21c7bb158bc371193a6b9ace01ac
Reviewed-on: http://git.am.freescale.net:8181/36404
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Pinghua An <pinghua.an@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|