summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-05-27w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC supportClifton Barnes
Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC. It was suggested to combine this functionality with the current ds2782 driver. Unfortunately, I'm unable to commit the time to refactoring this driver to that extent and I don't have a platform with the ds2782 part to validate that there are no regression issues by adding this functionality. [akpm@linux-foundation.org: use min_t()] Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27w1: have netlink search update kernel listDavid Fries
Reorganize so the netlink connector one wire search command will update the kernel list of detected slave devices. Otherwise, a newly detected device is unusable because unless it's in the kernel list of known devices any commands will result in ENODEV status. Signed-off-by: David Fries <David@Fries.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27w1: complete the 1-wire (w1) ds1wm driver search algorithmJean-François Dagenais
This adds multi-slave support of the w1 bus for the ds1wm Synthesizable 1-Wire Bus Master. Also many fixes and tweaks based on the rev3 of the datasheet http://datasheets.maxim-ic.com/en/ds/DS1WM.pdf Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27w1: add 1-wire (w1) DS2408 8-Channel Addressable Switch supportJean-François Dagenais
This DS2408 w1 slave driver is not complete for all the features of the chip, but its sufficient if you use it as a simple IO expander. [randy.dunlap@oracle.com: fix w1_ds2408.c printk formats] Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27w1: add 1-wire (w1) reset and resume command API supportJean-François Dagenais
The first patch adds generic functionnality to w1_io for Resume Command [A5h] lots of slaves support. I found it useful for multi-commands/reset workflows with the same slave on a multi-slave bus. This DS2408 w1 slave driver is not complete for all the features of the chip, but its sufficient if you use it as a simple IO expander. Enjoy! The ds1wm had Kconfig dependencies towards ARM && HAVE_CLK. I took them out since I was using the ds1wm on an x86_64 platform (ds1wm in a FPGA through pcie) and found them irrelevant. The clock freq/divisors at the top of ds1wm.c did not have the MSB set to 1. This bit is CLK_EN which turns the whole prescaler and dividers on. The driver never mentionned this bit either, so I just included this bit right in the table entries. I also took the liberty to add a couple of entries to the table. The spec doesn't explicitely mentions these possibilities but the description and examination of the core shows the prescalers & dividers can be used for more than the table explicitely shows. The table I enlarged still doesn't cover all possibilities, but it's a good start. I also made a few tweaks to a couple of the read and write algorithms which made sense while I had my head very deep in the ds1wm documentation. We stressed it a lot with 10+ slaves on the bus, many ds2408, ds2431 and ds2433 at the same time doing extensive interaction. It proved quite stable in our production environment. This patch: Add generic functionnality to w1_io for Resume Command [A5h] lots of slaves support. Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27drivers/char/ppdev.c: put gotten port valueJulia Lawall
parport_find_number() calls parport_get_port() on its result, so there should be a corresponding call to parport_put_port() before dropping the reference. Similar code is found in the function register_device() in the same file. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression struct parport * x; expression ra,rr; statement S1,S2; @@ x = parport_find_number(...) ... when != x = rr when any when != parport_put_port(x,...) when != if (...) { ... parport_put_port(x,...) ...} ( if(<+...x...+>) S1 else S2 | if(...) { ... when != x = ra when forall when != parport_put_port(x,...) *return...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27edac,rcu: use synchronize_rcu() instead of call_rcu()+rcu_barrier()Lai Jiangshan
synchronize_rcu() does the stuff as needed. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27drivers/char/mspec.c: use {k,v}zalloc to allocate memoryRakib Mullick
Let memory allocator initialize the allocated memory as null, thus remove the use of memset. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27ipmi: convert to seq_file interfaceAlexey Dobriyan
The ->read_proc interface is going away, convert to seq_file. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc:Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27kgdbts: unify/generalize gdb breakpoint adjustmentMike Frysinger
The Blackfin arch, like the x86 arch, needs to adjust the PC manually after a breakpoint is hit as normally this is handled by the remote gdb. However, rather than starting another arch ifdef mess, create a common GDB_ADJUSTS_BREAK_OFFSET define for any arch to opt-in via their kgdb.h. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Dongdong Deng <dongdong.deng@windriver.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27drivers/rtc/rtc-mxc.c: remove defines already included in rtc.hWolfram Sang
[akpm@linux-foundation.org: retain the code comments] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27drivers/rtc/rtc-pcf50633.c: don't request update IRQLars-Peter Clausen
Commit 51ba60c5 ("RTC: Cleanup rtc_class_ops->update_irq_enable()") removed the only user of the update IRQ, so there is no need to manage it any more. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27rtc: add support for spear rtcRajeev Kumar
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27drivers/rtc/rtc-mrst.c: use release_mem_region after request_mem_regionJulia Lawall
The memory allocated using request_mem_region should be released using release_mem_region, not release_region. The semantic patch that fixes part of this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1,E2,E3; @@ request_mem_region(E1,E2,E3) ... ?- release_region(E1,E2) + release_mem_region(E1,E2) // </smpl> [akpm@linux-foundation.org: use resource_size()] Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27rtc: add basic support for ST M41T93 SPI RTCVoss, Nikolaus
Add basic support for ST m41t93 SPI RTCs. Tested with factory-new and with "run-in" species with and without backup batteries. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27rtc: add rv3029c2 RTC supportHeiko Schocher
Add support for the Micro Crystal RV3029-C2 RTC chips. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27rtc: add EM3027 rtc driverMike Rapoport
Add support for EM Microelectronic EM3027 RTC chip. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27rtc: add support for the RTC in VIA VT8500 and compatiblesAlexey Charkov
This adds a driver for the RTC devices in VIA and WonderMedia Systems-on-Chip. Alarm, 1Hz interrupts, reading and setting time are supported. Signed-off-by: Alexey Charkov <alchark@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Alexey Charkov <alchark@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27m32r: fix spin_lock_irqsave() misuseKOSAKI Motohiro
spin_lock_irqsave() requires unsigned long. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27drivers/bcma/host_pci.c needs slab.hAndrew Morton
alpha allmodconfig: drivers/bcma/host_pci.c: In function 'bcma_host_pci_probe': drivers/bcma/host_pci.c:102: error: implicit declaration of function 'kzalloc' drivers/bcma/host_pci.c:102: warning: assignment makes pointer from integer without a cast Cc: <zajec5@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27drivers/video/mb862xx/mb862xxfbdrv.c needs uaccess.hAndrew Morton
alpha allmodconfig: drivers/video/mb862xx/mb862xxfbdrv.c: In function 'mb862xxfb_ioctl': drivers/video/mb862xx/mb862xxfbdrv.c:323: error: implicit declaration of function 'copy_to_user' drivers/video/mb862xx/mb862xxfbdrv.c:327: error: implicit declaration of function 'copy_from_user' Cc: Paul Mundt <lethal@linux-sh.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: gfs2: Drop __TIME__ usage isdn/diva: Drop __TIME__ usage atm: Drop __TIME__ usage dlm: Drop __TIME__ usage wan/pc300: Drop __TIME__ usage parport: Drop __TIME__ usage hdlcdrv: Drop __TIME__ usage baycom: Drop __TIME__ usage pmcraid: Drop __DATE__ usage edac: Drop __DATE__ usage rio: Drop __DATE__ usage scsi/wd33c93: Drop __TIME__ usage scsi/in2000: Drop __TIME__ usage aacraid: Drop __TIME__ usage media/cx231xx: Drop __TIME__ usage media/radio-maxiradio: Drop __TIME__ usage nozomi: Drop __TIME__ usage cyclades: Drop __TIME__ usage
2011-05-26Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/via: rename VIA local config struct basic_mmio_gpio: split into a gpio library and platform device gpio: remove some legacy comments in build files gpio: add trace events for setting direction and value gpio/pca953x: Use handle_simple_irq instead of handle_edge_irq gpiolib: export gpiochip_find gpio: remove redundant Kconfig depends on GPIOLIB basic_mmio_gpio: convert to non-__raw* accessors basic_mmio_gpio: support direction registers basic_mmio_gpio: support different input/output registers basic_mmio_gpio: detect output method at probe time basic_mmio_gpio: request register regions basic_mmio_gpio: allow overriding number of gpio basic_mmio_gpio: convert to platform_{get,set}_drvdata() basic_mmio_gpio: remove runtime width/endianness evaluation
2011-05-26Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (57 commits) regulator: Fix 88pm8607.c printk format warning input: Add support for Qualcomm PMIC8XXX power key input: Add Qualcomm pm8xxx keypad controller driver mfd: Add omap-usbhs runtime PM support mfd: Fix ASIC3 SD Host Controller Configuration size mfd: Fix omap_usbhs_alloc_children error handling mfd: Fix omap usbhs crash when rmmoding ehci or ohci mfd: Add ASIC3 LED support leds: Add ASIC3 LED support mfd: Update twl4030-code maintainer e-mail address mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUp mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0 mfd: Provide ab8500-core enumerators for chip cuts mfd: Check twl4030-power remove script error condition after i2cwrite mfd: Fix twl6030 irq definitions mfd: Add phoenix lite (twl6025) support to twl6030 mfd: Avoid to use constraint name in 88pm860x regulator driver mfd: Remove checking on max8925 regulator[0] mfd: Remove unused parameter from 88pm860x API mfd: Avoid to allocate 88pm860x static platform data ...
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Save PID of ID's owner RDMA/cma: Add support for netlink statistics export RDMA/cma: Pass QP type into rdma_create_id() RDMA: Update exported headers list RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h> RDMA/nes: Add a check for strict_strtoul() RDMA/cxgb3: Don't post zero-byte read if endpoint is going away RDMA/cxgb4: Use completion objects for event blocking IB/srp: Fix integer -> pointer cast warnings IB: Add devnode methods to cm_class and umad_class IB/mad: Return EPROTONOSUPPORT when an RDMA device lacks the QP required IB/uverbs: Add devnode method to set path/mode RDMA/ucma: Add .nodename/.mode to tell userspace where to create device node RDMA: Add netlink infrastructure RDMA: Add error handling to ib_core_init()
2011-05-26Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: spi/amba-pl022: work in polling or interrupt mode if pl022_dma_probe fails spi/spi_s3c24xx: Use spi_bitbang_stop instead of spi_unregister_master in s3c24xx_spi_remove spi/spi_nuc900: Use spi_bitbang_stop instead of spi_unregister_master in nuc900_spi_remove spi/spi_tegra: use spi_unregister_master() instead of spi_master_put() spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path spi: Use void pointers for data in simple SPI I/O operations spi/pl022: use cpu_relax in the busy loop spi/pl022: mark driver non-experimental spi/pl022: timeout on polled transfer v2 spi/dw_spi: improve the interrupt mode with the batch ops spi/dw_spi: change poll mode transfer from byte ops to batch ops spi/dw_spi: remove the un-necessary flush() spi/dw_spi: unify the low level read/write routines
2011-05-26Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem: xen: cleancache shim to Xen Transcendent Memory ocfs2: add cleancache support ext4: add cleancache support btrfs: add cleancache support ext3: add cleancache support mm/fs: add hooks to support cleancache mm: cleancache core ops functions and config fs: add field to superblock to support cleancache mm/fs: cleancache documentation Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
2011-05-26regulator: Fix 88pm8607.c printk format warningRandy Dunlap
Fix printk format warning (seen on x86_64) and change to unsigned output format: drivers/regulator/88pm8607.c:417: warning: format '%d' expects type 'int', but argument 3 has type 'resource_size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26input: Add support for Qualcomm PMIC8XXX power keyTrilok Soni
Add support for PMIC8XXX power key driven over dedicated KYPD_PWR_N pin. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26input: Add Qualcomm pm8xxx keypad controller driverTrilok Soni
Add Qualcomm PMIC8XXX based keypad controller driver supporting upto 18x8 matrix configuration. Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add omap-usbhs runtime PM supportKeshava Munegowda
The usbhs core driver does not enable/disable the interface and functional clocks; These clocks are handled by hwmod and runtime pm, hence insted of the clock enable/disable, the runtime pm APIS are used. however,the port clocks and tll clocks are handled by the usbhs core. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix ASIC3 SD Host Controller Configuration sizePaul Parsons
The size of the TC6380AF SD Host Controller Configuration area is 0x200 bytes (assuming registers are aligned on 32-bit boundaries), not 0x400 bytes. Source: Toshiba TC6380AF Specification sections 4.2 and 4.3.1 Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix omap_usbhs_alloc_children error handlingAxel Lin
1. Return proper error if omap_usbhs_alloc_child fails 2. In the case of goto err_ehci, we should call platform_device_unregister(ehci) instead of platform_device_put(ehci) because we have already added the platform device to device hierarchy. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix omap usbhs crash when rmmoding ehci or ohciKeshava Munegowda
The disabling of clocks and freeing GPIO are changed to fix the occurrence of the crash of rmmod of ehci and ohci drivers. The GPIOs should be freed after the spin locks are unlocked. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add ASIC3 LED supportPaul Parsons
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26leds: Add ASIC3 LED supportPaul Parsons
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Update twl4030-code maintainer e-mail addressPeter Ujfalusi
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUpJohan Palsson
The bitmask for enabling the BatTemp pull-up was wrong and is corrected. The name is also changed to be inline with the AB8500 register description Signed-off-by: Johan Palsson <johan.palsson@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0Karl Komierowski
In AB8500 3.0 the pull-up supplying the NTC must be manually activated. Add enumerators to chip version detection logic. Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com> Reviewed-by: Johan Palsson <johan.palsson@stericsson.com> Reviewed-by: Daniel Willerud <daniel.willerud@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Provide ab8500-core enumerators for chip cutsLinus Walleij
Since functionality in MFD cells may need to be adjusted according to chip revision, let's enumerate them and keep track of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Check twl4030-power remove script error condition after i2cwriteLesly A M
Fixing the error condition check in twl4030 remove script function. Due to some typo in commit ID: 11a441ce82d6ffecfd39b324024de0cd630b36c1 Signed-off-by: Lesly A M <leslyam@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Fix twl6030 irq definitionsGraeme Gregory
The charger fault IRQs from the twl will in future patches be handled by a seperate IRQ handler in the charger driver than the general charger IRQ. Give them different IRQ numbers now to allow the charger driver to be merged in the future. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add phoenix lite (twl6025) support to twl6030Graeme Gregory
Phoenix Lite is based on the twl6030 family of PMICs. It has mostly the same feature set of twl6030 but with small changes. The codec block has also been removed. It also has a new charger block and new features in its ADC block. VUSB handling also differs. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Avoid to use constraint name in 88pm860x regulator driverHaojian Zhuang
Avoid to use constraint name in regulator driver. So use regulator id is used instead in platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove checking on max8925 regulator[0]Haojian Zhuang
Since regulator[0] is always checking in mfd driver, it results in registration failure without regulator[0]. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove unused parameter from 88pm860x APIHaojian Zhuang
i2c_client parameter isn't used in some functions. Just remove it. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Avoid to allocate 88pm860x static platform dataHaojian Zhuang
Maybe multiple PMIC devices are installed into one board. Static variable can only make driver logic mess. So remove these variable, and use platform data from platform driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add rtc support to 88pm860xHaojian Zhuang
Enable rtc function in 88pm860x PMIC. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26regulator: Enable max8925 i2c sequence for controlHaojian Zhuang
Force to enable i2c as power up/down sequence. Otherwise, SD/LDO can't be enabled or disabled via accessing i2c bus. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v0.10.2 at 2024-08-19 14:25:39 (GMT)