summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-08-26Add API to allocate specific portals based on index. This allows an ↵Roy Pledge
application to get back the exact portal it was previously using by specifing the portals index value. Signed-off-by: Roy Pledge <Roy.Pledge@freescale.com> Change-Id: I8233816f0519731eb65b3671d68a01266eee42dd Reviewed-on: http://git.am.freescale.net:8181/4002 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Ladouceur Jeffrey-R11498 <Jeffrey.Ladouceur@freescale.com> Reviewed-by: Wang Haiying-R54964 <Haiying.Wang@freescale.com> Reviewed-by: Rivera Jose-B46482 <Jose.G.Rivera@freescale.com>
2013-08-26Add operation mapping for DMA controller and Maple.Varun Sethi
These are required for ALU DSP stashing use case. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Change-Id: I7efacb81b60d23e6e5f91632547f8b9a04028a1f Reviewed-on: http://git.am.freescale.net:8181/3442 Reviewed-by: Yoder Stuart-B08248 <stuart.yoder@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-08-26Add operation mapping for PMAN.Varun Sethi
Setup and operation mapping index for PMAN. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Change-Id: I4384a247491293260c1da1d4cf6cfc3b2bec2034 Reviewed-on: http://git.am.freescale.net:8181/3441 Reviewed-by: Yoder Stuart-B08248 <stuart.yoder@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-08-26Make stash id and operation mapping index per window attributes.Varun Sethi
Stash ID and operation mapping can now be set per dma window. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Change-Id: I987abbcba0575fea1b43843c2bce342f4eae4df2 Reviewed-on: http://git.am.freescale.net:8181/3439 Reviewed-by: Yoder Stuart-B08248 <stuart.yoder@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Conflicts: drivers/iommu/fsl_pamu.c drivers/iommu/fsl_pamu.h drivers/iommu/fsl_pamu_domain.c
2013-08-26Move operation mapping index to iommu.h.Varun Sethi
Represent operation mappings as an enum. These have been moved to iommu.h to support IOMMU API for setting operation mappings per window. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Change-Id: I900274f8ed703b9e10a4b3fb7d6653bd8c3a080d Reviewed-on: http://git.am.freescale.net:8181/3438 Reviewed-by: Yoder Stuart-B08248 <stuart.yoder@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-08-26Introduce an API for setting operation mapping index per window.Varun Sethi
This API can be used for setting operation mapping per DMA window. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Change-Id: Iea6d7993f09bddbaae94c475fd192f5106784bde Reviewed-on: http://git.am.freescale.net:8181/3440 Reviewed-by: Yoder Stuart-B08248 <stuart.yoder@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Conflicts: drivers/iommu/fsl_pamu.c drivers/iommu/fsl_pamu.h drivers/iommu/fsl_pamu_domain.c Change-Id: Iea6d7993f09bddbaae94c475fd192f5106784bde Reviewed-on: http://git.am.freescale.net:8181/3440 Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-26dpa_offload : fix kernel segfault in ipsec_offload applicationAlexandru Badicioiu
Buffer pool id for frames enqueued to ipsec_offload inbound macless interface must match the interface bpid. Signed-off-by: Alexandru Badicioiu <alexandru.badicioiu@freescale.com>
2013-08-12fmd: remove unused macrosMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: If2fda57aaf42719d0a3aae2256d513856583913b Reviewed-on: http://git.am.freescale.net:8181/3427 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-08-12fmd: handle erratum A006981Mandy Lavi
Changes open dma allocation to workaround erratum A006981 Also verify that it applies only to B4-rev1 while rev2 should have this erratum fixed Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: Icc0552269da9ad80763e8ad1394d6ad67ee143a8 Reviewed-on: http://git.am.freescale.net:8181/3428 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-08-12fmd: better support debug in preemptible kernelMandy Lavi
Prevent sleeping function to be called from invalid context Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: I1fa7619489248c823d55a96b00cc4b7bd75bbf6d Reviewed-on: http://git.am.freescale.net:8181/3430 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-08-10qman: Add CI-stashing support for QMan rev3.0 or laterHaiying Wang
Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Change-Id: Icda6a8547559ab45ceea7160cde566ca022e92e8 Reviewed-on: http://git.am.freescale.net:8181/3698 Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-10qman: remove eqcr_cmodeGeoff Thorpe
It was unused, and confusing efforts to implement support for EQCR_CI-stashing. Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Change-Id: Ia390a4b4b54efba60b4e9b12a73b7d1ec88bf530 Reviewed-on: http://git.am.freescale.net:8181/3697 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Wang Haiying-R54964 <Haiying.Wang@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-09dpa_offload: dpa_ipsec - Update create SA function to set hmd to invalidAndrei Varvara
DPA Classifier API was updated by adding a new attribute (hmd) to the struct dpa_cls_tbl_next_table_desc. DPA IPSec is using the classifier feature for linking two tables, if inbound policy verification is required but does not require the hmd option. A minor update had to be made to set the hdm to -1 (not valid) otherwise the 0 value would have been concidered valid by classifier and crash since not hmd is required here. Signed-off-by: Andrei Varvara <andrei.varvara@freescale.com> Change-Id: I76eccbf6a60b7d563540de539be5144112c1567c Reviewed-on: http://git.am.freescale.net:8181/3474 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-09dpa_offload: dpa_ipsec - Add support for NULL encryptionAndrei Varvara
The dpa ipsec component was not supporting ESP with NULL encryption. The patch is adding this suport. Signed-off-by: Andrei Varvara <andrei.varvara@freescale.com> Change-Id: I89111367e60c4592289687b0a13d84ac2911d23c Reviewed-on: http://git.am.freescale.net:8181/3473 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-09crypto: caam - Add define for NULL encryptionAndrei Varvara
This define is required for making descriptors with NULL encryption. Change-Id: If71ee727f18f1ea23a6bbe67b03046d526897a52 Signed-off-by: Andrei Varvara <andrei.varvara@freescale.com> Change-Id: I61ef1a7d6bcf115f99f5160f76154c09e5f7f7da Reviewed-on: http://git.am.freescale.net:8181/3472 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-09dpa_offload: Copy multicast group and header manipulation descriptors to ↵Radu Bulie
userspace during look-up by key or by ref operations Multicast group and hmanip descriptors were copied to userspace in classifier wrapper during look-up by key or by ref operations. The patch fixes the above issue. Signed-off-by: Radu Bulie <radu.bulie@freescale.com> Change-Id: Ibba7869bcbe339a3ef23bd4071a3aaa682fe7b9d Reviewed-on: http://git.am.freescale.net:8181/3353 Reviewed-by: Bulie Radu-Andrei-B37577 <Radu.Bulie@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-09dpa_offload: Copy storage profile id to userspace during look-up by key or ↵Radu Bulie
by ref operations Not all parameters were copied to userspace in classifier wrapper during look-up by key or by ref operations. The patch fixes the above issue. Change-Id: I4c33455a327c8dfd6fd0fa28d13cc7e28b856714 Signed-off-by: Radu Bulie <radu.bulie@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/3281 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-08-08fmd: add ioctl support to both xxTableGetMissStatistics functionsMandy Lavi
FM_PCD_MatchTableGetMissStatistics and FM_PCD_HashTableGetMissStatistics Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: I56a02300f4603245344effc898ff9fdd137d8e4c Reviewed-on: http://git.am.freescale.net:8181/3905 Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-08fmd: add T4/B4 definition FM_NO_GUARANTEED_RESET_VALUESMandy Lavi
Apparently reset values of B4/T4 in fmd are not completely reliable. will use this definition to force fman init values. Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: Id0b16cf7faf8c53ab9741bcd370e27e91a9ab2a0 Reviewed-on: http://git.am.freescale.net:8181/3904 Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-08dpa_offload: Add support in DPA Stats for miss statisticsAnca Jeanina FLOAREA
Added support in DPA Stats to retrieve the statistics for the miss-entry of either a Classification Node or a Classification Table. The user can request statistics for miss-entry by providing the key set to NULL. The Classification counter API was changed in order to allow the user to provide NULL instead of a valid key. Signed-off-by: Anca Jeanina FLOAREA <anca.floarea@freescale.com> Change-Id: Id871766e5cc7b494c934096829e12af15ded7544 Reviewed-on: http://git.am.freescale.net:8181/3830 Reviewed-by: Zanoschi Aurelian-B43522 <Aurelian.Zanoschi@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-08dpa_offload: Add possibility to query classification table miss action detailsMarian Chereji
Added a new function to query classification table miss action details. This function is only advertised as internal API and is needed by the DPA Stats component to acquire Miss Action Statistics. Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Change-Id: If9f506316c887bc44ebd5363c526a8f4fda3da1c Reviewed-on: http://git.am.freescale.net:8181/3829 Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-08-08fmd: support retrieval of more statistics countersMandy Lavi
- miss entry in a CC Node - miss entry in the hash table Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: Iacbebff6f8f7ef1fa9c97b24d1072515f5098860 Reviewed-on: http://git.am.freescale.net:8181/3828 Reviewed-by: Lavi Mandy-R52568 <Mandy.Lavi@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-07-18dpa_offload: Add direct scheme support for classifier miss actionRadu Bulie
This patch enables the direct schemesupport when a miss action is configured. Signed-off-by: Radu Bulie <radu.bulie@freescale.com> Change-Id: Ie16ab1e611a06b026fb5927ec2efea314bb0e2e1 Reviewed-on: http://git.am.freescale.net:8181/3354 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-18dpa_offload: Add separate resource pointer for multicast group import operationRadu Bulie
When multicast group was preallocated from a xml PCD file, the handle to the group was given as a multicast group parameter. To align the multicast component with header manipulation and classifier components, the group handle will be given as a resource input parameter to the function that creates a multicast group. Signed-off-by: Radu Bulie <radu.bulie@freescale.com> Change-Id: I254d1c681cc016513d4cb569e0dfcf5c56478163 Reviewed-on: http://git.am.freescale.net:8181/3279 Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-18fmd: COMPAT array size increased in order to be able to map more ccnode idsMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> ENGR00270413 Change-Id: I9ca855698d1eaa93b7cb131d811f4c9dd6c72088 Reviewed-on: http://git.am.freescale.net:8181/3297 Reviewed-by: Bucur Madalin-Cristian-B32716 <madalin.bucur@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-18fmd: fix wrapper error when adding range statistics countersMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> ENGR00269928 Change-Id: I7fa7fec2f1eef4b8233ed0d0069e30557adb4bda Reviewed-on: http://git.am.freescale.net:8181/3296 Reviewed-by: Bucur Madalin-Cristian-B32716 <madalin.bucur@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-18fmd: fix ambiguity with naming of ports in sysfsMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> ENGR00258538 Change-Id: If05f2a070c35c9884782d879566b04f40accfab8 Reviewed-on: http://git.am.freescale.net:8181/3295 Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-18fmd: exposed muram free size through sysfsMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: I69b5d2f92045daa71fd8dd6765596397fe736ef5 Reviewed-on: http://git.am.freescale.net:8181/3292 Reviewed-by: Bucur Madalin-Cristian-B32716 <madalin.bucur@freescale.com> Reviewed-by: Hamciuc Bogdan-BHAMCIU1 <bogdan.hamciuc@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-18dpa_offload: Add DPA Stats driver support for udev devicesAurelian Zanoschi
The device file in the file system is created automatically at init by the driver without need of any mknod commands. Change-Id: Ib0d5d4a47d3e92ec3d7a8813223017e0c24503a5 Signed-off-by: Aurelian Zanoschi <Aurelian.Zanoschi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/2881 Reviewed-by: Varvara Andrei-B21317 <andrei.varvara@freescale.com> Reviewed-by: Floarea Anca Jeanina-B12569 <anca.floarea@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Bulie Radu-Andrei-B37577 <Radu.Bulie@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-12Put the PCI specific code in the PAMU driver under CONFIG_PCI.Varun Sethi
This fixes the problem where the kernel build breaks, when PCI support is disabled. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Change-Id: I698626ec0a40ba81ef132890bc339c6be10d8673 Reviewed-on: http://git.am.freescale.net:8181/3282 Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-11dpaa_eth: Handle buffer pool depletionIoana Radulescu
If the system gets into an out-of-memory state, we are unable to refill the default buffer pool with new buffers. While this lasts, just release any incoming frame back to the pool without further processing. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Change-Id: Ia7fe59c44aa371f81540b45d197aef896b6d6b3a Reviewed-on: http://git.am.freescale.net:8181/3050 Reviewed-by: Bucur Madalin-Cristian-B32716 <madalin.bucur@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-11dpa_offload: Switch DPA Classifier from using fmd/crc64 to using lib/crc64Marian Chereji
The DPA Classifier is computing a CRC64 ECMA by using the Frame Manager driver. Because the CRC64 ECMA generic module was recently accepted in linux/lib it will now use this CRC64 module instead of the implementation from FMan driver. Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Change-Id: I97acd884302d7ab53ec78b045dd5978da2bf904a Reviewed-on: http://git.am.freescale.net:8181/3257 Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-11dpa_offload: Fix function free_resources to take in account errorsAnca Jeanina FLOAREA
Function free_resources was not taking in account error codes returned by free_cnts_resources and free_reqs_resources functions. In case an error occurred, function should be exited, so that the DPA Stats structure is not released. Signed-off-by: Anca Jeanina FLOAREA <anca.floarea@freescale.com> Change-Id: I74800a38f52634ca1e38e1d68d5637a4480bf525 Reviewed-on: http://git.am.freescale.net:8181/2967 Reviewed-by: Zanoschi Aurelian-B43522 <Aurelian.Zanoschi@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-11dpa_offload: Improve error logging in DPA ClassifierMarian Chereji
The same error logging and display functions should be used all over the DPAA offloading drivers. "pr_err" calls were replaced with the newer "log_err" macros in DPA Classifier. Change-Id: I170b52ea716a5c0a5cae83a20e42a52fa55c8659 Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/3008 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Bulie Radu-Andrei-B37577 <Radu.Bulie@freescale.com> Reviewed-by: Zanoschi Aurelian-B43522 <Aurelian.Zanoschi@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-11dpa_offload: Add protection against concurrent HM ops runtime modificationsMarian Chereji
When modifying a header manipulation operation at runtime, the DPA Classifier uses the FMD call FM_PCD_ManipNodeReplace. This function locks the entire PCD and will fail if the PCD is already locked (it is not a blocking function). The parallel access protection mechanism in DPA Classifier would only protect against parallel access ON THE SAME MANIP NODE. It used to ALLOW parallel access on DIFFERENT HM nodes, but this will fail due to the locking system in the FMD. This patch updates the locking mechanism in DPA Classifier for the HM runtime modification functions so that a single call to FM_PCD_ManipNodeReplace can happen at any one time. Change-Id: I833b96e177e57f76d109ec000bd34c603df5ba71 Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/3007 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Bulie Radu-Andrei-B37577 <Radu.Bulie@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-06dpa_offload: Add support for header manipulation on DPA Classifier ↵Marian Chereji
next_table action The DPA Classifier API did not allow the user to add header manipulation on an entry whose action was sending the frames to a new classification table. This change adds this support to the DPA Classifier by adding an "hmd" (header manipulation descriptor) attribute to the "dpa_cls_tbl_next_table_desc" parameters structure. Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Change-Id: I126cdfad8e76a8bec4453c8f7b506ad3380349e2 Reviewed-on: http://git.am.freescale.net:8181/3106 Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpa_offload: Added the implementation for Traffic Manager counter into DPA StatsAurelian Zanoschi
Added the Traffic Manager counter implementation into DPA Stats component. For getting the Class Queue or the Class Congestion Group counter values, the component will call QMan functions qman_ceetm_cq_get_dequeu_statistics, respectively qman_ceetm_ccg_get_reject_statistics. For both Traffic Manager Class or Congestion Group the values returned can be the number of bytes or the number of frames dequeued from a Class Queue, respectively rejected in all Class Queues that belong to the Congestion Group. Change-Id: I3d1e0b0c5a2e206de68d5745e02727b0e2aa0fad Signed-off-by: Aurelian Zanoschi <Aurelian.Zanoschi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/2877 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpaa_eth: Fix pool counters on error pathBogdan Hamciuc
When system memory is depleted, the Rx buffers are put back into their pool. Bad accounting on that error path made it so the software software counters remained behind the hardware counters, eventually allowing for negative totals. Fix this and keep the software pool counters in sync with the hardware counters. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@freescale.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Change-Id: I46191bc38f12aa6a25378eba3e5891bc3f18cbc6 Reviewed-on: http://git.am.freescale.net:8181/3049 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Sovaiala Cristian-Constantin-B39531 <Cristian.Sovaiala@freescale.com> Reviewed-by: Bucur Madalin-Cristian-B32716 <madalin.bucur@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpa_offload: Fix memory leak when plcr allocation failedAnca Jeanina FLOAREA
In function store_policy_param_to_sa_pol_list in case memory allocation of plcr failed, then the memory occupied by pol_entry needs to be released. Signed-off-by: Anca Jeanina FLOAREA <anca.floarea@freescale.com> Change-Id: I88fd3ba1403b6af4d41d06ebd179219db9b84420 Reviewed-on: http://git.am.freescale.net:8181/2970 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpa_offload: Fix memory leaks for Classifier countersAnca Jeanina FLOAREA
For compat mode, the DPA Stats wrapper needs to allocate kernel-space memory to store the keys provided by the user-space application. After the driver call was successful, the memory must be released. Signed-off-by: Anca Jeanina FLOAREA <anca.floarea@freescale.com> Change-Id: I489a73896f50da125e331dea6e459703cbdd2e76 Reviewed-on: http://git.am.freescale.net:8181/2986 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zanoschi Aurelian-B43522 <Aurelian.Zanoschi@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpa_offload: Added checks for dpa stats user provided paramsAurelian Zanoschi
Added extra checks for user provided params at counter creation to avoid DPA Stats driver getting stuck. Change-Id: Ic1cef09937217529c34d9b8dfc1c608fe93c195d Signed-off-by: Aurelian Zanoschi <Aurelian.Zanoschi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/2876 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpa_offload: Improved error messages with runtime information in DPA StatsAurelian Zanoschi
Updated all error messages from dpa_stats component by using the new macro's (log_err and log_warn) defined in dpa_offload. Added additional runtime information related to the counters that reported the error like counter id or member index for class counters Change-Id: Ib13652905bbbcb1da37385aa750d361452d7c09d Signed-off-by: Aurelian Zanoschi <Aurelian.Zanoschi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/2875 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpa_offload: Add udev support for dpa_classifierMarian Chereji
Added udev support so that the device file /dev/dpa_classifier gets created automatically at boot up instead of the user needing to create it manually using mknod commands. Change-Id: Icb2212a3232fe7eddba750617059f8d8b0ba87b5 Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/3009 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Varvara Andrei-B21317 <andrei.varvara@freescale.com> Reviewed-by: Zanoschi Aurelian-B43522 <Aurelian.Zanoschi@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpa_offload: Add support for udev in DPA IPsec WrapperAndrei Varvara
the device file for ipsec character device is now created by udev deamon. Change-Id: I3ec41cbe2347c6f2b1d5e9e30c45d77e76dc9a38 Signed-off-by: Andrei Varvara <andrei.varvara@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/3016 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-07-05dpa_offload: Fix l2_hdr_size correct usageAnca Jeanina FLOAREA
Function build_extended_encap_shared_descriptor had the fourth parameter as an uint8_t, but it must be uint32_t in order to store the l2_hdr_size. Signed-off-by: Anca Jeanina FLOAREA <anca.floarea@freescale.com> Change-Id: Iabcdc3f80aa372a695385d3d39f1759647651792 Reviewed-on: http://git.am.freescale.net:8181/2969 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Varvara Andrei-B21317 <andrei.varvara@freescale.com> Reviewed-by: Chereji Marian-Cornel-R27762 <marian.chereji@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-06-15Revert "fmd: Conditionally set default MAX_FRAME_SIZE"Bogdan Hamciuc
The initial patch was meant to allow the user to set any MTU she desires without rebooting the system and changing the kernel bootargs. This however led to problems when the user would manually choose FSL_DPAA_ETH_OPTIMIZE_FOR_IPFWD, because the default MAX_FRAME_SIZE=9600 would remain selected and this wasn't all that obvious. Reverting to the previous config selection is the best choice now. This reverts commit 68dbabbdb1e28169a372530ca3712c3b63296322. Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Change-Id: I71499e9b86f8909d049ff4347c4fe035e67d704a Reviewed-on: http://git.am.freescale.net:8181/2971 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Sovaiala Cristian-Constantin-B39531 <Cristian.Sovaiala@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-06-15dpaa_eth: Switch compile-time default optimizationBogdan Hamciuc
Move back to the "optimize for IPFWD" compile-time choice. This effectively reverts commit id 692f5140. Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Change-Id: I9735f489789b7568ae6f6137387d01a92bec9ee2 Reviewed-on: http://git.am.freescale.net:8181/2972 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Sovaiala Cristian-Constantin-B39531 <Cristian.Sovaiala@freescale.com> Reviewed-by: Schmitt Richard-B43082 <B43082@freescale.com> Tested-by: Schmitt Richard-B43082 <B43082@freescale.com>
2013-06-11fmd,dpaa_eth: Selectively reenable FMan allocation algorithmBogdan Hamciuc
On P3/P4/P5 platforms, as well as on P1023, FMan's default resource allocation values are not enough to enable jumbo frame forwarding in the absence of SG support. Enable the (previously deselected) FMan dynamic resource allocation algorithm on those platforms, if the legacy DPAA-Ethernet driver (missing SG support) is used. Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Change-Id: I6dfc9e2c624c123febfc4d2cbe8fe1fda660525d Reviewed-on: http://git.am.freescale.net:8181/2929 Reviewed-by: Bucur Madalin-Cristian-B32716 <madalin.bucur@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Lavi Mandy-R52568 <Mandy.Lavi@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-06-11dpaa_eth: Fix endless loop in case of memory depletionBogdan Hamciuc
Check the return value from the buffer-allocating function, in order to prevent looping forever if memory depletes. Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Change-Id: Ia321b33ebb38012679248ae4905d4dafaa8efd7d Reviewed-on: http://git.am.freescale.net:8181/2928 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Sovaiala Cristian-Constantin-B39531 <Cristian.Sovaiala@freescale.com> Reviewed-by: Radulescu Ruxandra Ioana-B05472 <ruxandra.radulescu@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
2013-06-07Fix RaidEngine error status 3000000 issue.Xuelin Shi
When multi flows get into fsl_re_jr_dequeue(...), there is race condition issue about the hardware register writing. Move it into the locked area. Signed-off-by: Xuelin Shi <b29237@freescale.com> Change-Id: I8eb019b4433eab05cf96261326f7e4c1790ff6c6 Reviewed-on: http://git.am.freescale.net:8181/2901 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Li Yang-R58472 <LeoLi@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
generated by cgit v0.10.2 at 2024-08-18 10:55:29 (GMT)