summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-10-14fmd: Remove FM_PORT_PcdPrsModifyStartOffset routine - not supportedMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-10-13fsl_qbman: enable sending cscn to dcp for old qman revisionHaiying Wang
Set CSCN_TARG with correct DCP portal in qman_create_cgr_to_dcp() funciton for the qman revision < qman_3.0 JIRA issue# QLINUX-3814 Signed-off-by: Haiying Wang <Haiying.wang@freescale.com>
2015-09-24dpaa_eth: Add a configurable dpa_tx callCamelia Groza
Signed-off-by: Camelia Groza <camelia.groza@freescale.com>
2015-09-24mmc: sdhci-of-esdhc: fix compile error on ARM platformYangbo Lu
Fix two compile errors below, error: implicit declaration of function 'of_iomap' error: implicit declaration of function 'out_be32' Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
2015-09-24QorIQ/TMU: add thermal management support based on TMUJia Hongtao
It supports one critical trip point and one passive trip point. The cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
2015-09-24thermal: fix cpu_cooling max_level behaviorEduardo Valentin
As per Documentation/thermal/sysfs-api.txt, max_level is an index, not a counter. Thus, in case a CPU has 3 valid frequencies, max_level is expected to be 2, for instance. The current code makes max_level == number of valid frequencies, which is bogus. This patch fix the cpu_cooling device by ranging max_level properly. Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-09-24mmc: sdhci-of-esdhc: add SDR50 mode support for SD/MMC Legacy Adapter CardYangbo Lu
The eSDHC is not compatible with SD spec well, so we need to use eSDHC-specific code to switch to SDR50 mode. 1. IO signal voltage switching, eSDHC uses SDHC_VS to switch io voltage and it's needed to configure a global utilities register SCFG_SDHCIOVSELCR(if it has) and SDHC_VS signal. 2. Before executing tuning procedure, eSDHC should set its own tuning block. static const struct sdhci_ops sdhci_esdhc_ops = { ... .set_tuning_block = esdhc_set_tuning_block, .signal_voltage_switch = esdhc_signal_voltage_switch, }; Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
2015-09-24mmc: esdhc: add eMMC45 Adapter Card HS200 mode supportYangbo Lu
The eSDHC is not compatible with SD spec well, it's needed to add callbacks for signal voltage switching and tuning block setting for eSDHC for eMMC45 Adapter Card HS200 mode support. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
2015-07-20Merge branch 'qoriq-sdk' into LS1-SDK-Rev2.0jason
2015-07-09crypto: caam - fix SEC ERA readingAlex Porosanu
In order to ensure that the SEC ERA property is properly read from DTS, of_property_read* functions need to be used. Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Horia Geantă <horia.geanta@freescale.com> Change-Id: I3fe958ca9b0ab91c2dbd089d1b2f090042cc3fd0 Reviewed-on: http://git.am.freescale.net:8181/39374 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-07-09crypto: caam - fix snooping for write transactionsHoria Geantă
HW coherency won't work properly for CAAM write transactions if AWCACHE is left to default (POR) value - 4'b0001. It has to be programmed to 4'b0010. For platforms that have HW coherency support: -PPC-based: the update has no effect; CAAM coherency already works due to the IOMMU (PAMU) driver setting the correct memory coherency attributes -ARM-based: the update fixes cache coherency issues, since IOMMU (SMMU) driver is not programmed to behave similar to PAMU Change-Id: I1f91a526c0bdf28b799d19cab9599b115cad55b3 Signed-off-by: Horia Geantă <horia.geanta@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/39256 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16QE/HDLC: modify QE-HDLC for both ARM and POWERPCZhao Qiang
ls1021 support QE IP block and it is arm, So modify QE-HDLC code to adapt bothe arm and powerpc Signed-off-by: Zhao Qiang <B45475@freescale.com> Change-Id: I9e02e53ae1fafffeec3bf7145309002db19c2dc1 Reviewed-on: http://git.am.freescale.net:8181/38130 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16Test patch: Enable CAN SoC level loopbackBhupesh Sharma
This patch enables the SoC level CAN loopback. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Change-Id: I5efd40f5d853d11b2476b2bbab0db66c7b1711fa Reviewed-on: http://git.am.freescale.net:8181/38097 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16can: flexcan: Add support for non RX-FIFO modeBhupesh Sharma
This patch adds support for non RX-FIFO (legacy) mode in the flexcan driver. On certain SoCs, the RX-FIFO support might be broken, as a result we need to fall-back on the legacy (non RX-FIFO) mode to receive CAN frames. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com> Change-Id: I8b07e851b68fcca9716d02b14b6712c2da654ad5 Reviewed-on: http://git.am.freescale.net:8181/38095 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16can: flexcan: Remodel FlexCAN register r/w APIs for BE instancesBhupesh Sharma
The FlexCAN IP on certain SoCs like (Freescale's LS1021A) is modelled in a big-endian fashion, i.e. the registers and the message buffers are organized in a BE way. More details about the LS1021A SoC can be seen here: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=LS1021A&nodeId=018rH325E4017B# This patch ensures that the register read/write APIs are remodelled to address such cases, while ensuring that existing platforms (where the FlexCAN IP was modelled in LE way) do not break. Tested on LS1021A-QDS board. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Sakar Arora <Sakar.Arora@freescale.com> Change-Id: I4116956dfc92ae565a2aea96356014c77f506c1c Reviewed-on: http://git.am.freescale.net:8181/38094 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16can: flexcan: Add ls1021a flexcan device entryBhupesh Sharma
This patch adds ls1021a flexcan device entry to the flexcan driver code. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Change-Id: Iad4f7caf7be878784414d194335f203ea02743e5 Reviewed-on: http://git.am.freescale.net:8181/38093 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16Revert 'can: flexcan: Add ls1021a flexcan device entry'Bhupesh Sharma
This reverts commit 61af51e63ff5a3666788b1c5c2d42c3df3a03c34. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Change-Id: I196e1fbc30a97ae0102b13eddd25bdf9230e02f4 Reviewed-on: http://git.am.freescale.net:8181/38091 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16Revert 'net: can: Remodel FlexCAN register read/write APIs for BE instances'Bhupesh Sharma
This reverts commit 4966cbb525a2acfb7c2782f1994949e97b45f242. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Change-Id: Ifec4963a1ed01fb60f949575e1c2be4da5c38cf6 Reviewed-on: http://git.am.freescale.net:8181/38090 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16Revert 'can: flexcan: Add support for non RX-FIFO mode and conditional ↵Bhupesh Sharma
ERRATA ERR005829 handling' This reverts commit 0ec580b6a604a4fcfd65c3515459def643c8517a. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Change-Id: I64fb32407f7083aa433d4d7ec34d7171c2bdc02b Reviewed-on: http://git.am.freescale.net:8181/38089 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-16mmc: sdhci: more efficient interrupt enable register handlingYangbo Lu
Rather than wasting cycles read-modify-writing the interrupt enable registers, cache the value locally instead. This patch is from upstreaming linux, commit id b537f94ce19583de1882f539a5cc49aa99260aca Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Change-Id: I3c1bb4d4b3f7d7dccbaa4748816bfe381edc484c Reviewed-on: http://git.am.freescale.net:8181/37869 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-12pci/layerscape: update MSI code for ls1021 rev2 MSI supportMinghuan Lian
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Change-Id: I68ac4e509f41c249d38579b34cb78d35e9231b0f Reviewed-on: http://git.am.freescale.net:8181/37558 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-11mmc: sdhci-pltfm: enable interrupt mode to detect cardYangbo Lu
Enable interrupt mode to detect card instead of polling mode for ls1021a by removing the quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION. This could improve data transferring performance and avoid the call trace caused by polling card status sometime. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Change-Id: Id965cd89b16f3f4d8327f1ca3d7ba9ed146e7a44 Reviewed-on: http://git.am.freescale.net:8181/37819 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-06-10fsl_qbman: hardcode mps field to 60Haiying Wang
In LNI shaper setup, setting mps to 60 to round up the frame length to 60 for shaper calculations, for any dequeued frame length less than 60 bytes. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Change-Id: I88013d2ee39b3620a4e97f3366a87664ec0ea9dc Reviewed-on: http://git.am.freescale.net:8181/37437 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-06-10drivers: usb: gadget: Correct NULL pointer checking in fsl gadgetNikhil Badola
Correct NULL pointer checking for endpoint descriptor before it gets dereferenced Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Change-Id: I449d00d49f2ae842aa256907021b95b7885ccaf5 Reviewed-on: http://git.am.freescale.net:8181/37641 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-06-09VFIO: Check for null pointer after mallocBharat Bhushan
Add the check whether malloc allocated memory successfully or not Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Change-Id: If306002aa8541cf76286b7b78d0027c3395672a6 Reviewed-on: http://git.am.freescale.net:8181/37576 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Stuart Yoder <stuart.yoder@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-06-05fsl_usdpaa: Ensure map name is initialized and clearedRoy Pledge
Make sure that map name is null terminated when a memory map is split and is cleared when a map is destroyed Signed-off-by: Roy Pledge <Roy.Pledge@freescale.com> Change-Id: If779b54817b9c2d49d6e18106b333a51ca2b2dcf Reviewed-on: http://git.am.freescale.net:8181/37436 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-06-05spi: fsl-espi: Workaround for the deep sleep issue when boot from SPIHou Zhiqiang
On T1042D4RDB, system can't resume and warm reset to uboot prompt sometimes. Disable eSPI controller hardware before enter deep sleep, and enable it after resume. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Change-Id: I0f091890ef3e3219697ff7f5bbf4a02809e6e45b Reviewed-on: http://git.am.freescale.net:8181/37469 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-06-04crypto: caam - remove SEC pool channelAlex Porosanu
For improved performance in case of unbalanced flows, all FQs from SEC to cores were added into a pool channel. Adverse effects have been observed for e5500 platforms. This patch removes the creation and subsequent usage of the pool channel. Change-Id: I49dbb93bfede16985fa2ed451cde17e7c2658648 Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/37366 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mircea Pop <mircea.pop@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-06-04fsl_usdpaa: Fix mem_create behaviorAhmed Mansour
Remove check added in previous patch to disallow size zero to be passed from user space in dma_mem_create(). Size zero is deemed valid if the memory region is already created and a second user wishes to get a mapping to the existent memory. Corrected values copied back to the user to include the length of the memory and the flags. This is important to reflect a memory size correction when the user passes size zero. The user can check the new size using dma_mem_params() Added a warning message if the user attempts to map to an existing area in memory, but specifies a non-zero size that does not match the original memory mapping. In the future this case will trigger an error and the mapping will fail. Currently the behavior is to print a warning message and the kernel passes back to user space the corrected size. Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com> Change-Id: Ib8535ada6f0fb616986bce3c52eae65f3bf583da Reviewed-on: http://git.am.freescale.net:8181/37365 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-06-01Merge branch 'qoriq-sdk' into LS1-SDK-Rev2.0jason
2015-06-01clk: fix type cast warningLijun Pan
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Change-Id: Ife4ad017add52bdd911b373d5d8dbb55a7e680ec Reviewed-on: http://git.am.freescale.net:8181/37122 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-06-01crypto: caam - fix size_t print formatHoria Geantă
ARRAY_SIZE() returns a size_t value. Thus, when printing these values, %zu or %zx must be used, or else warnings show up: CC drivers/crypto/caam//caamalg.o In file included from include/linux/thread_info.h:11:0, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/crypto/caam//compat.h:9, from drivers/crypto/caam//caamalg.c:47: drivers/crypto/caam//caamalg.c: In function 'caam_cra_init': include/linux/bug.h:33:45: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=] #define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) ^ include/linux/compiler-gcc.h:47:28: note: in expansion of macro 'BUILD_BUG_ON_ZERO' #define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) ^ include/linux/kernel.h:41:59: note: in expansion of macro '__must_be_array' #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)) ^ drivers/crypto/caam//caamalg.c:4396:13: note: in expansion of macro 'ARRAY_SIZE' op_id, ARRAY_SIZE(digest_size)); ^ CC drivers/crypto/caam//caamhash.o In file included from include/linux/thread_info.h:11:0, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/crypto/caam//compat.h:9, from drivers/crypto/caam//caamhash.c:56: drivers/crypto/caam//caamhash.c: In function 'caam_hash_cra_init': include/linux/bug.h:33:45: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=] #define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) ^ include/linux/compiler-gcc.h:47:28: note: in expansion of macro 'BUILD_BUG_ON_ZERO' #define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) ^ include/linux/kernel.h:41:59: note: in expansion of macro '__must_be_array' #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)) ^ drivers/crypto/caam//caamhash.c:1782:12: note: in expansion of macro 'ARRAY_SIZE' op_id, ARRAY_SIZE(runninglen)); ^ Signed-off-by: Horia Geantă <horia.geanta@freescale.com> Change-Id: Ica005a337d654f7d55eea6f5e5aee911cbd016b2 Reviewed-on: http://git.am.freescale.net:8181/37071 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-27fmd: fix case label consistencyMandy Lavi
Change-Id: I41397d36e3966e099e53d8d5c35b2fdbd27e2055 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36866 Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-25fsl_qbman: Update ceetm with some user friendly APIsHaiying Wang
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Change-Id: Iaaf60a7e20a7cd96698fbcb3f98b5918000872e1 Reviewed-on: http://git.am.freescale.net:8181/36225 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-25Revert "gianfar: Disable Rx snooping for LS1"Claudiu Manoil
This reverts commit 7b1b36aa677846919b11ef4befa211063ed45702. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Change-Id: Ie309215f0085b3c7624a337444f54c38ecc65d69 Reviewed-on: http://git.am.freescale.net:8181/29540 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Sandeep Malik <Sandeep.Malik@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36549
2015-05-25Revert "gianfar: Remove tx snooping support from LS1"Claudiu Manoil
This reverts commit f2cb63dfbbc290dd37fb4a4272f4905104ea5ebb. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Change-Id: Id060915a002e4eabae23a521da4283eb447216ef Reviewed-on: http://git.am.freescale.net:8181/29539 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Sandeep Malik <Sandeep.Malik@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36548
2015-05-22crypto: caam/qi - tls10 support for 32bit platformsTudor Ambarus
Tested with tcrypt on p1023rdb platform. Change-Id: Ic19a8d2ed5ce3603d2d9f893736b68eea03d480b Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36220 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-22mtd: m25p80: add reset process before suspendHou Zhiqiang
Make sure the SPI Flash into reset state. Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Change-Id: I627606256571b80ba80a5a84a25b52685e799b0c Reviewed-on: http://git.am.freescale.net:8181/36725 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mingkai Hu <Mingkai.Hu@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-21dce: Typo correctionMahammad Ismayilzada
slab_scr_128b should be checked for NULL. Signed-off-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com> Change-Id: I51f5b7c96fbee9a0f1baf2340ff97b23caed434e Reviewed-on: http://git.am.freescale.net:8181/36649 Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-21qbman: Fix null pointer issueMahammad Ismayilzada
bufs passed as NULL and dereferenced. Replaced with local variable. Signed-off-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com> Change-Id: I39aecee95b086567a21487ee2b751126aa0777f1 Reviewed-on: http://git.am.freescale.net:8181/36648 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-21fsl_usdpaa: Protect against truncationAhmed Mansour
is_power_of_2 is a Linux function that takes unsigned long. it was used by our new function is_power_of_4 which takes u64. Trucation is possible because unsigned long is 32 bits wide in 32 bit applications. This patch removes the dependancy on is_power_of_2 to solve this issue Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com> Change-Id: I5939e7e6457e07e9355ba54fef80a7bc71c3a64b Reviewed-on: http://git.am.freescale.net:8181/36609 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-21pme: Protect against possible NULL dereferenceAhmed Mansour
Add BUG_ON to prevent NULL dereference if ctx->flags indicate flow mode (none direct mode) then a call back token must be specified otherwise the call back token can be passed NULL Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com> Change-Id: I20f95b2fd77699eb32ef54515666127ebc6b1743 Reviewed-on: http://git.am.freescale.net:8181/36607 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com> Reviewed-by: Mahammad Ismayilzada <mahammad.ismayilzada@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-21crypto: caampkc - workaround for erratum A-006899Tudor Ambarus
The problem will occur only in T1040R1. A workaround has been verified; set a Scatter Gather (SG) flag on the Q or G Pointers on KPG, which will give the PKHA unload time to complete. It's sufficient to have the SG flag set for only one of these. Change-Id: I5a403576c6e995110227872c84de7e74da0144c5 Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36617 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-21qbman: Fix qman_ceetm_cscn_dcp_get()Ahmed Mansour
Corrections to struct qm_mcr_ceetm_ccgr_query to match block guide Corrections to qman_ceetm_cscn_dcp_get() bit manipulation to match bit order in block guide Signed-off-by: Ahmed Mansour <Ahmed.Mansour@freescale.com> Change-Id: I78d730263495358c29be766933aceae9d5b36326 Reviewed-on: http://git.am.freescale.net:8181/36407 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Haiying Wang <Haiying.Wang@freescale.com> Reviewed-by: Roy Pledge <roy.pledge@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-20fmd: fix buffer overflow in dsar sysfs printoutsMandy Lavi
Change-Id: Id5ecb2f85caea934dc3de2b69e538af45316e14f Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36567 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-19crypto: caam - fix TLS processing for SEC in LE modeAlex Porosanu
In order to process TLS data that is received in network byte order, a swap is needed for a SEC block working in little endian mode. This is done by using the MOVEB command. Change-Id: I8290ad7348d9e66169c05eff8bda71e587beb0a9 Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36369 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-19crypto: caam - add support for MOVEB commandAlex Porosanu
CHAs of SEC work natively in BE mode. When moving data to the alignment blocks, swapping is needed for LE platforms. This is done by means of the MOVEB command (introduced in ERA 7). This patch adds support to DCL for this command. Change-Id: Ie74f2d8a1cf101acd5a23686ff8eb835d1a1f047 Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36365 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Tudor-Dan Ambarus <tudor.ambarus@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-19crypto: caam - tls10 support for 32bit ppc platformsTudor Ambarus
Tested with tcrypt on bsc9132qds platform. Change-Id: Ia8a58b786779e00b267ad3cd2fa05b30d5e17bfb Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36219 Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-19crypto: caam - fix warning in APPEND_MATH_IMM_u64Tudor Ambarus
An implicit truncation is done when using a variable of 64 bits in MATH command: warning: large integer implicitly truncated to unsigned type [-Woverflow] Silence the compiler by feeding it with an explicit truncated value. Change-Id: I95e3f397f62f9b850c0c7f26e7079b9d9688b87e Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36218 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Horia Ioan Geanta Neag <horia.geanta@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-19fmd: fix licensing conflictsMandy Lavi
Change-Id: Ib662fba72d3ad0e5260bcc36006fa0dd7158b056 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36405 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Nir Erez <nir.erez@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
generated by cgit v0.10.2 at 2024-07-03 12:47:50 (GMT)