Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm update from David Teigland:
"This includes a single patch to avoid excessive and unnecessary
scanning of rsbs to free."
* tag 'dlm-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: avoid scanning unchanged toss lists
|
|
Return EINVAL from write if the size is larger than
allowed. Do this before allocating kernel memory for
the bogus size, which could lead to OOM.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Jana Saout <jana@saout.de>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Keep track of whether a toss list contains any
shrinkable rsbs. If not, dlm_scand can avoid
scanning the list for rsbs to shrink. Unnecessary
scanning can otherwise waste a lot of time because
the toss lists can contain a large number of rsbs
that are non-shrinkable (directory records).
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
When a node is removed that held a PW/EX lock, the
existing master node should invalidate the lvb on the
resource due to the purged lock.
Previously, the existing master node was invalidating
the lvb if it found only NL/CR locks on the resource
during recovery for the removed node. This could lead
to cases where it invalidated the lvb and shouldn't
have, or cases where it should have invalidated and
didn't.
When recovery selects a *new* master node for a
resource, and that new master finds only NL/CR locks
on the resource after lock recovery, it should
invalidate the lvb. This case was handled correctly
(but was incorrectly applied to the existing master
case also.)
When a process exits while holding a PW/EX lock,
the lvb on the resource should be invalidated.
This was not happening.
The lvb contents and VALNOTVALID flag should be
recovered before granting locks in recovery so that
the recovered lvb state is provided in the callback.
The lvb was being recovered after the lock was granted.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.
CC: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The variable users is initialized but never used
otherwise, so remove the unused variable.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Pull networking changes from David Miller:
1) GRE now works over ipv6, from Dmitry Kozlov.
2) Make SCTP more network namespace aware, from Eric Biederman.
3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.
4) Make openvswitch network namespace aware, from Pravin B Shelar.
5) IPV6 NAT implementation, from Patrick McHardy.
6) Server side support for TCP Fast Open, from Jerry Chu and others.
7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
Borkmann.
8) Increate the loopback default MTU to 64K, from Eric Dumazet.
9) Use a per-task rather than per-socket page fragment allocator for
outgoing networking traffic. This benefits processes that have very
many mostly idle sockets, which is quite common.
From Eric Dumazet.
10) Use up to 32K for page fragment allocations, with fallbacks to
smaller sizes when higher order page allocations fail. Benefits are
a) less segments for driver to process b) less calls to page
allocator c) less waste of space.
From Eric Dumazet.
11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.
12) VXLAN device driver, one way to handle VLAN issues such as the
limitation of 4096 VLAN IDs yet still have some level of isolation.
From Stephen Hemminger.
13) As usual there is a large boatload of driver changes, with the scale
perhaps tilted towards the wireless side this time around.
Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
hyperv: Add buffer for extended info after the RNDIS response message.
hyperv: Report actual status in receive completion packet
hyperv: Remove extra allocated space for recv_pkt_list elements
hyperv: Fix page buffer handling in rndis_filter_send_request()
hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
hyperv: Fix the max_xfer_size in RNDIS initialization
vxlan: put UDP socket in correct namespace
vxlan: Depend on CONFIG_INET
sfc: Fix the reported priorities of different filter types
sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
sfc: Fix loopback self-test with separate_tx_channels=1
sfc: Fix MCDI structure field lookup
sfc: Add parentheses around use of bitfield macro arguments
sfc: Fix null function pointer in efx_sriov_channel_type
vxlan: virtual extensible lan
igmp: export symbol ip_mc_leave_group
netlink: add attributes to fdb interface
tg3: unconditionally select HWMON support when tg3 is enabled.
Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
gre: fix sparse warning
...
|
|
It is a frequent mistake to confuse the netlink port identifier with a
process identifier. Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.
I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.
I have successfully built an allyesconfig kernel with this change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
device_write only checks whether the request size is big enough, but it doesn't
check if the size is too big.
At that point, it also tries to allocate as much memory as the user has requested
even if it's too much. This can lead to OOM killer kicking in, or memory corruption
if (count + 1) overflows.
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Remove unnecessary code form send_to_sock routine.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Since add_sock() always returns a success code - 0, its return
value type should be changed from integer to void.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Once the tcp_create_listen_sock() is returned successfully, we
will invoke add_sock() immediately. In add_sock(), the 'con'
variable is assigned to 'sk_user_data', meanwhile, the 'sock' is
also set to 'con->sock'. So it's unnecessary to do the same thing
in tcp_create_listen_sock().
Signed-off-by: Xue Ying <ying.xue@windriver.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The in_recovery rw_semaphore has always been acquired and
released by different threads by design. To work around
the "BUG: bad unlock balance detected!" messages, adjust
things so the dlm_recoverd thread always does both down_write
and up_write.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Use DEFINE_SPINLOCK for global dlm_cb_seq_spin.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
A deadlock sometimes occurs between dlm_controld closing
a lowcomms connection through configfs and dlm_send looking
up the address for a new connection in configfs.
dlm_controld does a configfs rmdir which calls
dlm_lowcomms_close which waits for dlm_send to
cancel work on the workqueues.
The dlm_send workqueue thread has called
tcp_connect_to_sock which calls dlm_nodeid_to_addr
which does a configfs lookup and blocks on a lock
held by dlm_controld in the rmdir path.
The solution here is to save the node addresses within
the lowcomms code so that the lowcomms workqueue does
not need to step through configfs to get a node address.
dlm_controld:
wait_for_completion+0x1d/0x20
__cancel_work_timer+0x1b3/0x1e0
cancel_work_sync+0x10/0x20
dlm_lowcomms_close+0x4c/0xb0 [dlm]
drop_comm+0x22/0x60 [dlm]
client_drop_item+0x26/0x50 [configfs]
configfs_rmdir+0x180/0x230 [configfs]
vfs_rmdir+0xbd/0xf0
do_rmdir+0x103/0x120
sys_rmdir+0x16/0x20
dlm_send:
mutex_lock+0x2b/0x50
get_comm+0x34/0x140 [dlm]
dlm_nodeid_to_addr+0x18/0xd0 [dlm]
tcp_connect_to_sock+0xf4/0x2d0 [dlm]
process_send_sockets+0x1d2/0x260 [dlm]
worker_thread+0x170/0x2a0
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
I don't know exactly how, but in some cases, a dir
record is not removed, or a new one is created when
it shouldn't be. The result is that the dir node
lookup returns a master node where the rsb does not
exist. In this case, The master node will repeatedly
return -EBADR for requests, and the lock requests will
be stuck.
Until all possible ways for this to happen can be
eliminated, a simple and effective way to recover from
this situation is for the supposed master node to send
a standard remove message to the dir node when it
receives a request for a resource it has no rsb for.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The process of rebuilding locks on a new master during
recovery could re-order the locks on the convert queue,
creating an "in place" conversion deadlock that would
not be resolved. Fix this by not considering queue
order when granting conversions after recovery.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Use wait_event_timeout to avoid using a timer
directly.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
It was possible for a remove message on an old
rsb to be sent after a lookup message on a new
rsb, where the rsbs were for the same resource
name. This could lead to a missing directory
entry for the new rsb.
It is fixed by keeping a copy of the resource
name being removed until after the remove has
been sent. A lookup checks if this in-progress
remove matches the name it is looking up.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
When a large number of resources are being recovered,
a linear search of the recover_list takes a long time.
Use an idr in place of a list.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Remove the dir hash table (dirtbl), and use
the rsb hash table (rsbtbl) as the resource
directory. It has always been an unnecessary
duplication of information.
This improves efficiency by using a single rsbtbl
lookup in many cases where both rsbtbl and dirtbl
lookups were needed previously.
This eliminates the need to handle cases of rsbtbl
and dirtbl being out of sync.
In many cases there will be memory savings because
the dir hash table no longer exists.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
We aren't allowed to pass NULL pointers to kmem_cache_destroy() so if
both allocations fail, it leads to a NULL dereference.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The "nodir" mode (statically assign master nodes instead
of using the resource directory) has always been highly
experimental, and never seriously used. This commit
fixes a number of problems, making nodir much more usable.
- Major change to recovery: recover all locks and restart
all in-progress operations after recovery. In some
cases it's not possible to know which in-progess locks
to recover, so recover all. (Most require recovery
in nodir mode anyway since rehashing changes most
master nodes.)
- Change the way nodir mode is enabled, from a command
line mount arg passed through gfs2, into a sysfs
file managed by dlm_controld, consistent with the
other config settings.
- Allow recovering MSTCPY locks on an rsb that has not
yet been turned into a master copy.
- Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages
from a previous, aborted recovery cycle. Base this
on the local recovery status not being in the state
where any nodes should be sending LOCK messages for the
current recovery cycle.
- Hold rsb lock around dlm_purge_mstcpy_locks() because it
may run concurrently with dlm_recover_master_copy().
- Maintain highbast on process-copy lkb's (in addition to
the master as is usual), because the lkb can switch
back and forth between being a master and being a
process copy as the master node changes in recovery.
- When recovering MSTCPY locks, flag rsb's that have
non-empty convert or waiting queues for granting
at the end of recovery. (Rename flag from LOCKS_PURGED
to RECOVER_GRANT and similar for the recovery function,
because it's not only resources with purged locks
that need grant a grant attempt.)
- Replace a couple of unnecessary assertion panics with
error messages.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Change some existing error/debug messages to
collect more useful information, and add
some new error/debug messages to address
recently found problems.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
If the rsb is found in the "keep" tree, but is
not the right type (i.e. not MASTER), we can
return immediately with the result. There's
no point in going on to search the "toss" list
as if we hadn't found it.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Unify the checking for both types of ignored
rcom messages, and replace the two log_debug
statements with a single, rate limited debug
message.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
An outstanding remote operation (an lkb on the "waiter"
list) could sometimes miss being resent during recovery.
The decision was based on the lkb_nodeid field, which
could have changed during an earlier aborted recovery,
so it no longer represents the actual remote destination.
The lkb_wait_nodeid is always the actual remote node,
so it is the best value to use.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
During lowcomms shutdown, a new connection could possibly
be created, and attempt to use a workqueue that's been
destroyed. Similarly, during startup, a new connection
could attempt to use a workqueue that's not been set up
yet. Add a global variable to indicate when new connections
are allowed.
Based on patch by: Christine Caulfield <ccaulfie@redhat.com>
Reported-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm fixes from David Teigland:
"This includes one short patch fixing the behavior of the QUECVT flag,
which the gfs2 folks are waiting on."
* tag 'dlm-fixes-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: fix QUECVT when convert queue is empty
|
|
The QUECVT flag should not prevent conversions from
being granted immediately when the convert queue is
empty.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op. This leads to a
proliferation of the default_open() implementation across the entire
tree.
Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().
This replacement was done with the following semantic patch:
<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}
@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates for 3.4 from David Teigland:
"This set includes one trivial fix, and one simple recovery speed up.
Directory recovery can use the standard hash table to find resources
rather than always searching the linear recovery list."
* tag 'dlm-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: last element of dlm_local_addr[] never used
dlm: fix slow rsb search in dir recovery
|
|
The last element of dlm_local_addr[DLM_MAX_ADDR_COUNT]
was not used because the loop ended at COUNT - 1.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
avoids allocating a fd that a) propagates to every kernel thread and
usermodehelper b) is not properly released.
References: http://article.gmane.org/gmane.linux.network.drbd/22529
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function used to find an rsb during directory
recovery was searching the single linear list of
rsb's. This wasted a lot of time compared to
using the standard hash table to find the rsb.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: add recovery callbacks
dlm: add node slots and generation
dlm: move recovery barrier calls
dlm: convert rsb list to rb_tree
|
|
These new callbacks notify the dlm user about lock recovery.
GFS2, and possibly others, need to be aware of when the dlm
will be doing lock recovery for a failed lockspace member.
In the past, this coordination has been done between dlm and
file system daemons in userspace, which then direct their
kernel counterparts. These callbacks allow the same
coordination directly, and more simply.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Slot numbers are assigned to nodes when they join the lockspace.
The slot number chosen is the minimum unused value starting at 1.
Once a node is assigned a slot, that slot number will not change
while the node remains a lockspace member. If the node leaves
and rejoins it can be assigned a new slot number.
A new generation number is also added to a lockspace. It is
set and incremented during each recovery along with the slot
collection/assignment.
The slot numbers will be passed to gfs2 which will use them as
journal id's.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Put all the calls to recovery barriers in the same function
to clarify where they each happen. Should not change any behavior.
Also modify some recovery debug lines to make them consistent.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
C assignment can handle struct in6_addr copying.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the linked lists to rb_tree's in the rsb
hash table to speed up searches. Slow rsb searches
were having a large impact on gfs2 performance due
to the large number of dlm locks gfs2 uses.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
* 'for-3.1' of git://linux-nfs.org/~bfields/linux:
nfsd: don't break lease on CLAIM_DELEGATE_CUR
locks: rename lock-manager ops
nfsd4: update nfsv4.1 implementation notes
nfsd: turn on reply cache for NFSv4
nfsd4: call nfsd4_release_compoundargs from pc_release
nfsd41: Deny new lock before RECLAIM_COMPLETE done
fs: locks: remove init_once
nfsd41: check the size of request
nfsd41: error out when client sets maxreq_sz or maxresp_sz too small
nfsd4: fix file leak on open_downgrade
nfsd4: remember to put RW access on stateid destruction
NFSD: Added TEST_STATEID operation
NFSD: added FREE_STATEID operation
svcrpc: fix list-corrupting race on nfsd shutdown
rpc: allow autoloading of gss mechanisms
svcauth_unix.c: quiet sparse noise
svcsock.c: include sunrpc.h to quiet sparse noise
nfsd: Remove deprecated nfsctl system call and related code.
NFSD: allow OP_DESTROY_CLIENTID to be only op in COMPOUND
Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
|
|
Both the filesystem and the lock manager can associate operations with a
lock. Confusingly, one of them (fl_release_private) actually has the
same name in both operation structures.
It would save some confusion to give the lock-manager ops different
names.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Allow multiple workqueue items (locks with callbacks) to be
processed concurrently. There should be no reason not to
take advantage of this workqueue feature.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Instead of creating our own kthread (dlm_astd) to deliver
callbacks for all lockspaces, use a per-lockspace workqueue
to deliver the callbacks. This eliminates complications and
slowdowns from many lockspaces sharing the same thread.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
gfs2 recently began using this feature heavily,
creating more debug output than we want to see.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
By pre-allocating rsb structs before searching the hash
table, they can be inserted immediately. This avoids
always having to repeat the search when adding the struct
to hash list.
This also adds space to the rsb struct for a max resource
name, so an rsb allocation can be used by any request.
The constant size also allows us to finally use a slab
for the rsb structs.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This is simpler and quicker than the hash table, and
avoids needing to search the hash list for every new
lkid to check if it's used.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The gfp and size args were switched.
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
In fs/dlm/lock.c in the dlm_scan_waiters() function there are 3 small
issues:
1) There's no need to test the return value of the allocation and do a
memset if is succeedes. Just use kzalloc() to obtain zeroed memory.
2) Since kfree() handles NULL pointers gracefully, the test of
'warned' against NULL before the kfree() after the loop is completely
pointless. Remove it.
3) The arguments to kmalloc() (now kzalloc()) were swapped. Thanks to
Dr. David Alan Gilbert for pointing this out.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David Teigland <teigland@redhat.com>
|