summaryrefslogtreecommitdiff
path: root/fs/squashfs
AgeCommit message (Collapse)Author
2012-01-04vfs: fix the stupidity with i_dentry in inode destructorsAl Viro
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once(); the cost of taking it into inode_init_always() will be negligible for pipes and sockets and negative for everything else. Not to mention the removal of boilerplate code from ->destroy_inode() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next: Squashfs: Add an option to set dev block size to 4K
2011-11-02Squashfs: Add an option to set dev block size to 4KPhillip Lougher
This commit adds an option to set the device block size used to 4K. By default Squashfs sets the device block size (sb_min_blocksize) to 1K or the smallest block size supported by the block device (if larger). This, because blocks are packed together and unaligned in Squashfs, should reduce latency. This, however, gives poor performance on MTD NAND devices where the optimal I/O size is 4K (even though the devices can support smaller block sizes). Using a 4K device block size may also improve overall I/O performance for some file access patterns (e.g. sequential accesses of files in filesystem order) on all media. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2011-11-02filesystems: add set_nlink()Miklos Szeredi
Replace remaining direct i_nlink updates with a new set_nlink() updater function. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-09-27doc: fix broken referencesPaul Bolle
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: Make ZLIB compression support optional Squashfs: Update documentation for XZ and add squashfs-tools devel tree
2011-07-22Squashfs: Make ZLIB compression support optionalPhillip Lougher
Squashfs now supports XZ and LZO compression in addition to ZLIB. As such it no longer makes sense to always include ZLIB support. In particular embedded systems may only use LZO or XZ compression, and the ability to exclude ZLIB support will reduce kernel size. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2011-07-20make d_splice_alias(ERR_PTR(err), dentry) = ERR_PTR(err)Al Viro
... and simplify the living hell out of callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20deuglify squashfs_lookup()Al Viro
d_splice_alias(NULL, dentry) is equivalent to d_add(dentry, NULL), NULL so no need for that if (inode) ... in there (or ERR_PTR(0), for that matter) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: Fix sanity check patches on big-endian systems
2011-05-29Squashfs: Fix sanity check patches on big-endian systemsPhillip Lougher
le64 values should be swapped when accessing on big-endian systems. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: update email address Squashfs: add extra sanity checks at mount time Squashfs: add sanity checks to fragment reading at mount time Squashfs: add sanity checks to lookup table reading at mount time Squashfs: add sanity checks to id reading at mount time Squashfs: add sanity checks to xattr reading at mount time Squashfs: reverse order of filesystem table reading Squashfs: move table allocation into squashfs_read_table()
2011-05-26Squashfs: update email addressPhillip Lougher
My existing email address may stop working in a month or two, so update email to one that will continue working. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-25Squashfs: add extra sanity checks at mount timePhillip Lougher
Add some extra sanity checks of the inode and directory structures. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-25Squashfs: add sanity checks to fragment reading at mount timePhillip Lougher
Fsfuzzer generates corrupted filesystems which throw a warn_on in kmalloc. One of these is due to a corrupted superblock fragments field. Fix this by checking that the number of bytes to be read (and allocated) does not extend into the next filesystem structure. Also add a couple of other sanity checks of the mount-time fragment table structures. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-25Squashfs: add sanity checks to lookup table reading at mount timePhillip Lougher
Fsfuzzer generates corrupted filesystems which throw a warn_on in kmalloc. One of these is due to a corrupted superblock inodes field. Fix this by checking that the number of bytes to be read (and allocated) does not extend into the next filesystem structure. Also add a couple of other sanity checks of the mount-time lookup table structures. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-25Squashfs: add sanity checks to id reading at mount timePhillip Lougher
Fsfuzzer generates corrupted filesystems which throw a warn_on in kmalloc. One of these is due to a corrupted superblock no_ids field. Fix this by checking that the number of bytes to be read (and allocated) does not extend into the next filesystem structure. Also add a couple of other sanity checks of the mount-time id table structures. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-25Squashfs: add sanity checks to xattr reading at mount timePhillip Lougher
These checks add sanity checking of the mount-time xattr structures. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-25Squashfs: reverse order of filesystem table readingPhillip Lougher
Reverse order of table reading from mostly first to last in placement order, to last to first. This is to enable extra superblock sanity checks to be added in later patches. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-25Squashfs: move table allocation into squashfs_read_table()Phillip Lougher
This eliminates a lot of duplicate code. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-05-10treewide: fix a few typos in commentsJustin P. Mattock
- kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-22Squashfs: Use vmalloc rather than kmalloc for zlib workspacePhillip Lougher
Bugzilla bug 31422 reports occasional "page allocation failure. order:4" at Squashfs mount time. Fix this by making zlib workspace allocation use vmalloc rather than kmalloc. Reported-by: Mehmet Giritli <mehmet@giritli.eu> Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-03-16Squashfs: handle corruption of directory structurePhillip Lougher
Handle the rare case where a directory metadata block is uncompressed and corrupted, leading to a kernel oops in directory scanning (memcpy). Normally corruption is detected at the decompression stage and dealt with then, however, this will not happen if: - metadata isn't compressed (users can optionally request no metadata compression), or - the compressed metadata block was larger than the original, in which case the uncompressed version was used, or - the data was corrupt after decompression This patch fixes this by adding some sanity checks against known maximum values. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-02-28Squashfs: wrap squashfs_mount() definitionPhillip Lougher
Squashfs_get_sb() to squashfs_mount() conversion (commit 152a0836) results in line over 80 characters. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-02-28Squashfs: xz_wrapper doesn't need to include squashfs_fs_i.h anymorePhillip Lougher
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-02-28Squashfs: Update Kconfig help text to include xz compressionPhillip Lougher
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-02-28Squashfs: add compression options support to xz decompressorPhillip Lougher
Pass the dictionary size used to compress datablocks. Using a dictionary size less than the block size saves memory overhead, in many cases without adversely affecting compression ratio. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-02-28Squashfs: extend decompressor framework to handle compression optionsPhillip Lougher
Extend decompressor framework to handle compression options stored in the filesystem. These options can be used by the relevant decompressor at initialisation time to over-ride defaults. The presence of compression options in the filesystem is indicated by the COMP_OPT filesystem flag. If present the data is read from the filesystem and passed to the decompressor init function. The decompressor init function signature has been extended to take this data. Also update the init function signature in the glib, lzo and xz decompressor wrappers. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-26squashfs: fix use of uninitialised variable in zlib & xz decompressorsPhillip Lougher
Fix potential use of uninitialised variable caused by recent decompressor code optimisations. In zlib_uncompress (zlib_wrapper.c) we have int zlib_err, zlib_init = 0; ... do { ... if (avail == 0) { offset = 0; put_bh(bh[k++]); continue; } ... zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH); ... } while (zlib_err == Z_OK); If continue is executed (avail == 0) then the while condition will be evaluated testing zlib_err, which is uninitialised first time around the loop. Fix this by getting rid of the 'if (avail == 0)' condition test, this edge condition should not be being handled in the decompressor code, and instead handle it generically in the caller code. Similarly for xz_wrapper.c. Incidentally, on most architectures (bar Mips and Parisc), no uninitialised variable warning is generated by gcc, this is because the while condition test on continue is optimised out and not performed (when executing continue zlib_err has not been changed since entering the loop, and logically if the while condition was true previously, then it's still true). Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13Squashfs: simplify CONFIG_SQUASHFS_LZO handlingPhillip Lougher
Get rid of messy repeated #if(n)def CONFIG_SQUASHFS_LZO code in decompressor.c Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-13Squashfs: move squashfs_i() definition from squashfs.hPhillip Lougher
Move squashfs_i() definition out of squashfs.h, this eliminates the need to #include squashfs_fs_i.h from numerous files. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-13Squashfs: get rid of default n in KconfigPhillip Lougher
As pointed out by Geert Uytterhoeven, "default n" is the default, no reason to specify it. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-13Squashfs: add missing check in zlib_wrapperPhillip Lougher
On file system corruption zlib can return Z_STREAM_OK with input buffers remaining, which will not be released. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-13Squashfs: remove unnecessary variable in zlib_wrapperPhillip Lougher
Get rid of unnecessary bytes variable, and remove redundant initialisation of zlib_err. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-13Squashfs: Add XZ compression configuration optionPhillip Lougher
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-13Squashfs: add XZ compression supportPhillip Lougher
Add support for reading file systems compressed with the XZ compression algorithm. This patch adds the XZ decompressor wrapper code. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-01-07fs: icache RCU free inodesNick Piggin
RCU free the struct inode. This will allow: - Subsequent store-free path walking patch. The inode must be consulted for permissions when walking, so an RCU inode reference is a must. - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want to take i_lock no longer need to take sb_inode_list_lock to walk the list in the first place. This will simplify and optimize locking. - Could remove some nested trylock loops in dcache code - Could potentially simplify things a bit in VM land. Do not need to take the page lock to follow page->mapping. The downsides of this is the performance cost of using RCU. In a simple creat/unlink microbenchmark, performance drops by about 10% due to inability to reuse cache-hot slab objects. As iterations increase and RCU freeing starts kicking over, this increases to about 20%. In cases where inode lifetimes are longer (ie. many inodes may be allocated during the average life span of a single inode), a lot of this cache reuse is not applicable, so the regression caused by this patch is smaller. The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU, however this adds some complexity to list walking and store-free path walking, so I prefer to implement this at a later date, if it is shown to be a win in real situations. I haven't found a regression in any non-micro benchmark so I doubt it will be a problem. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2010-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: fix function prototype Squashfs: fix use of __le64 annotated variable
2010-10-29new helper: mount_bdev()Al Viro
... and switch of the obvious get_sb_bdev() users to ->mount() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-28Squashfs: fix function prototypePhillip Lougher
The fourth argument should be unsigned. Also add missing include so that the function prototype is defined in xattr_id.c This fixes a couple of sparse warnings. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-10-28Squashfs: fix use of __le64 annotated variablePhillip Lougher
This fixes a sparse with endian checking warning. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-04BKL: Remove BKL from squashfsArnd Bergmann
The BKL is only used in put_super and fill_super, which are both protected by the superblocks s_umount rw_semaphore. Therefore it is safe to remove the BKL entirely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-10-04BKL: Explicitly add BKL around get_sb/fill_superJan Blunck
This patch is a preparation necessary to remove the BKL from do_new_mount(). It explicitly adds calls to lock_kernel()/unlock_kernel() around get_sb/fill_super operations for filesystems that still uses the BKL. I've read through all the code formerly covered by the BKL inside do_kern_mount() and have satisfied myself that it doesn't need the BKL any more. do_kern_mount() is already called without the BKL when mounting the rootfs and in nfsctl. do_kern_mount() calls vfs_kern_mount(), which is called from various places without BKL: simple_pin_fs(), nfs_do_clone_mount() through nfs_follow_mountpoint(), afs_mntpt_do_automount() through afs_mntpt_follow_link(). Both later functions are actually the filesystems follow_link inode operation. vfs_kern_mount() is calling the specified get_sb function and lets the filesystem do its job by calling the given fill_super function. Therefore I think it is safe to push down the BKL from the VFS to the low-level filesystems get_sb/fill_super operation. [arnd: do not add the BKL to those file systems that already don't use it elsewhere] Signed-off-by: Jan Blunck <jblunck@infradead.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-08Squashfs: fix checkpatch.pl warningsPhillip Lougher
Checkpatch.pl in 2.6.34 added a check for spaces between tabs. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-08-05Squashfs: fix filename typoPhillip Lougher
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-08-05Squashfs: update Kconfig and documentation for LZOPhillip Lougher
Update compression types supported and add some help text for the LZO Kconfig option. Also add missing "default n" line and make some trivial whitespace cleanups too. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-08-05Squashfs: fix block size use in LZO decompressorPhillip Lougher
Sizing the buffer using block size alone is incorrect leading to a potential buffer over-run on 4K block size file systems (because the metadata block size is always 8K). Srclength is set to the maximum expected size of the decompressed block and it is block_size or 8K depending on whether a data or metadata block is being decompressed. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>