summaryrefslogtreecommitdiff
path: root/include/sound
AgeCommit message (Collapse)Author
2012-01-09Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Driver specific changes Again, a lot of platforms have changes in here: pxa, samsung, omap, at91, imx, ... * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: sa1100: clean up of the clock support ARM: pxa: add dummy clock for sa1100-rtc RTC: sa1100: support sa1100, pxa and mmp soc families RTC: sa1100: remove redundant code of setting alarm RTC: sa1100: Clean out ost register Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq() pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq() ARM: EXYNOS: Modified files for SPI consolidation work ARM: S5P64X0: Enable SDHCI support ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names ARM: S5P64X0: Add HSMMC setup for host Controller ARM: EXYNOS: Add USB OHCI support to ORIGEN board USB: Add Samsung Exynos OHCI diver ARM: EXYNOS: Add USB OHCI support to SMDKV310 board ARM: EXYNOS: Add USB OHCI device net: macb: fix build break with !CONFIG_OF i2c: tegra: Support DVC controller in device tree i2c: tegra: Add __devinit/exit to probe/remove net/at91_ether: use gpio_is_valid for phy IRQ line ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT ...
2012-01-04switch procfs to umode_t useAl Viro
both proc_dir_entry ->mode and populating functions Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-02ASoC: mxs-saif: remove function in platform_dataDong Aisheng
Add master_mode and master_id in platfrom_data since it's board specific and board knows it. Then we can remove the function pointer in platfrom_data to make the driver more devicetree friendly. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-01treewide: use __printf not __attribute__((format(printf,...)))Joe Perches
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31include: replace linux/module.h with "struct module" wherever possiblePaul Gortmaker
The <linux/module.h> pretty much brings in the kitchen sink along with it, so it should be avoided wherever reasonably possible in terms of being included from other commonly used <linux/something.h> files, as it results in a measureable increase on compile times. The worst culprit was probably device.h since it is used everywhere. This file also had an implicit dependency/usage of mutex.h which was masked by module.h, and is also fixed here at the same time. There are over a dozen other headers that simply declare the struct instead of pulling in the whole file, so follow their lead and simply make it a few more. Most of the implicit dependencies on module.h being present by these headers pulling it in have been now weeded out, so we can finally make this change with hopefully minimal breakage. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ...
2011-10-27Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-10-26Merge branch 'topic/remove-irqf_disable' into for-linusTakashi Iwai
2011-10-26Merge branch 'topic/misc' into for-linusTakashi Iwai
2011-10-14ASoC: core: Add flag to ignore pmdown_time at pcm_closePeter Ujfalusi
With this flag codec drivers can indicate that it is desired to ignore the pmdown_time for DAPM shutdown sequence when playback stream is stopped. The DAPM sequence will be executed without delay in this case. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: Fix DAPM sync for TLV320AIC3x custom DAPM widgetMark Brown
We really should be doing this in the core, not in a driver... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
2011-10-09ASoC: Cache connected input and output recursionsMark Brown
The number of connected input and output endpoints for a given widgets can't change during a DAPM run so there is no need to redo the recursion through branches of the tree we've already visited. Doing this on one of my test systems gives an improvement of: Power Path Neighbour Before: 63 607 731 After: 63 141 181 which scales up well as more widgets are involved in paths. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-09ALSA: control: add support for ENUMERATED user space controlsClemens Ladisch
Handling of user control elements was implemented for all types except ENUMERATED. This type will be needed for the device-specific mixers of upcoming FireWire drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-06ASoC: fix codec breakage caused by the volsw/volsw_2r mergerPeter Ujfalusi
By accident few places still uses the _2r calls from the core. This is a quick fix, the drivers using the old callbacks going to be changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Remove snd_soc_put_volsw_2r definitionPeter Ujfalusi
We do not have users for snd_soc_put_volsw_2r anymore. It can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Combine snd_soc_put_volsw/put_volsw_2r functionsPeter Ujfalusi
Handle the put_volsw/put_volsw_2r in one function. To avoid build breakage in twl6040 keep the snd_soc_put_volsw_2r as define, and map it snd_soc_put_volsw. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Combine snd_soc_get_volsw/get_volsw_2r functionsPeter Ujfalusi
Handle the get_volsw/get_volsw_2r in one function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Combine snd_soc_info_volsw/info_volsw_2r functionsPeter Ujfalusi
Handle the info_volsw/info_volsw_2r in one function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ASoC: core: Change SOC_SINGLE/DOUBLE_VALUE representationPeter Ujfalusi
SOC_SINGLE/DOUBLE_VALUE is used for mixer controls, where the bits are within one register. Assign .rreg to be the same as .reg for these types. With this change we can tell if the mixer in question: is mono: mc->reg == mc->rreg && mc->shift == mc->rshift is stereo, within single register: mc->reg == mc->rreg && mc->shift != mc->rshift is stereo, in two registers: mc->reg != mc->rreg The patch provide a small inline function to query, if the mixer is stereo, or mono. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05ALSA: jack - Add "Line In" input jack constantsDavid Henningsson
Similar to Line Out, these constants form the base for future patches enabling input jack reporting for Line in jacks. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-05ASoC: Only run power_check() on a widget once per runMark Brown
Some widgets will get power_check() run on them more than once during a DAPM run, most commonly due to supply widgets checking to see if their consumers are powered up. It's wasteful to do this so cache the result of power_check() during a run. For one system I tested this on I got an improvement of: Power Path Neighbour Before: 106 970 1186 After: 69 727 905 from this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Do DAPM power checks only for widgets changed since last runMark Brown
In order to reduce the number of DAPM power checks we run keep a list of widgets which have been changed since the last DAPM run and iterate over that rather than the full widget list. Whenever we change the power state for a widget we add all the source and sink widgets it has to the dirty list, ensuring that all widgets in the path are checked. This covers more widgets than we need to as some of the neighbour widgets won't be connected but it's simpler as a first step. On one system I tried this gave: Power Path Neighbour Before: 207 1939 2461 After: 114 1066 1327 which seems useful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: core: Introduce SOC_DOUBLE_R_VALUE macroPeter Ujfalusi
With the new macro we can remove duplicated code for the SOC_DOUBLE_R type of controls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: core: Introduce SOC_DOUBLE_VALUE macroPeter Ujfalusi
With the new macro we can remove duplicated code for the SOC_DOUBLE type of controls. We can also remap the SOC_SINGLE_VALUE macro to SOC_DOUBLE_VALUE Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-28ALSA: pcm - Export snd_pcm_lib_default_mmap() helperTakashi Iwai
Export the default mmap function, snd_pcm_lib_default_mmap(). The upcoming non-snooping support in HD-audio driver will use this to override the mmap method. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-28ASoC: Allow DAI formats to be specified in the dai_linkMark Brown
For almost all machines the DAI format is a constant, always set to the same thing. This means that not only should we normally set it on init rather than in hw_params() (where it has been for historical reasons) we should also allow users to configure this by setting a variable in the dai_link structure. The combination of these two will make many machine drivers even more data driven. Implement a new dai_fmt field in the dai_link doing just that. Since 0 is a valid value for many format flags and we need to be able to tell if the field is actually set also add one to all the values used to configure formats. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-23ASoC: Add platform data for WM1250 EV1 GPIOsMark Brown
The WM1250 EV1 has some GPIOs which can be used to control the behaviour at runtime. Request them all if supplied and add a set_bias_level() function to start and stop the clocks. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22ASoC: Add another DAPM stat for neighbour checksMark Brown
The number of times we look at a potentially connected neighbour is just as important as the number of times we actually recurse into looking at that neighbour so also collect that statistic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-22sound: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-22Merge branch 'topic/asoc' into topic/remove-irqf_disableTakashi Iwai
2011-09-21ASoC: tpa6130a2: Remove model_id from platform dataPeter Ujfalusi
The model_id is no longer needed within the platform_data for the TPA driver since the model of TPA specified with the device name (tpa6130a2/tpa6140a2). Also update rx51 (the only affected user) to use the device name rather than platform data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-21ASoC: soc-core: symmetry checking for each DAIs separatelyDong Aisheng
The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-21ASoC: Trace and collect statistics for DAPM graph walkingMark Brown
One of the longest standing areas for improvement in ASoC has been the DAPM algorithm - it repeats the same checks many times whenever it is run and makes no effort to limit the areas of the graph it checks meaning we do an awful lot of walks over the full graph. This has never mattered too much as the size of the graph has generally been small in relation to the size of the devices supported and the speed of CPUs but it is annoying. In preparation for work on improving this insert a trace point after the graph walk has been done. This gives us specific timing information for the walk, and in order to give quantifiable (non-benchmark) numbers also count every time we check a link or check the power for a widget and report those numbers. Substantial changes in the algorithm may require tweaks to the stats but they should be useful for simpler things. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-20ASoC: Add WM5100 driverMark Brown
The WM5100 is a highly integrated low power audio subsystem with advanced digital signal processing capabilities including effects, speech clarity enhancement and active noise cancellation. This initial driver provides support for basic audio paths, further patches will provide more complete functionality. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-20ALSA: pcm: add snd_pcm_hw_rule_noresample()Clemens Ladisch
Add a helper function to allow drivers to disable hardware resampling when the application has specified the SNDRV_PCM_HW_PARAMS_NORESAMPLE flag. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-19ASoC: mxs-saif: add record functionDong Aisheng
1. add different clkmux mode handling SAIF can use two instances to implement full duplex (playback & recording) and record saif may work on EXTMASTER mode which is using other saif's BITCLK&LRCLK. The clkmux mode could be set in pdata->init() in mach-specific code. For generic saif driver, it only needs to know who is his master and the master id is also provided in mach-specific code. 2. support playback and capture simutaneously however the sample rates can not be different due to hw limitation. Signed-off-by: Dong Aisheng <b29396@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-14ALSA: mpu401: clean up interrupt specificationClemens Ladisch
The semantics of snd_mpu401_uart_new()'s interrupt parameters are somewhat counterintuitive: To prevent the function from allocating its own interrupt, either the irq number must be invalid, or the irq_flags parameter must be zero. At the same time, the irq parameter being invalid specifies that the mpu401 code has to work without an interrupt allocated by the caller. This implies that, if there is an interrupt and it is allocated by the caller, the irq parameter must be set to a valid-looking number which then isn't actually used. With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value, which forces us to handle the parameters differently. This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the device interrupt is handled by the caller, and makes the allocation of the interrupt to depend only on the irq parameter. As suggested by Takashi, the irq_flags parameter was dropped because, when used, it had the constant value IRQF_DISABLED. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-31ASoC: Allow source specification for CODEC level sysclkMark Brown
Similarly to PLLs/FLLs some modern CODECs provide selectable system clock sources. When the clock is the clock for a DAI we do not usually need to identify which clock is being configured so can use clk_id for the source clock but with CODEC wide system clocks we will need to specify both the clock being configured and the source. Add a source argument to the CODEC driver set_sysclk() operation to reflect this. As this operation is not as widely used as the DAI set_sysclk() operation the change is not very invasive. We probably ought to go and make the same alternation for DAIs at some point. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: Allow register defaults to be larger than unsigned shortMark Brown
Devices that need this exist; obviously the newer regmap defaults mechanism will deal with this more happily. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-25PM QoS: Minor clean-upsJean Pihet
- Misc fixes to improve code readability: * rename struct pm_qos_request_list to struct pm_qos_request, * rename pm_qos_req parameter to req in internal code, consistenly use req in the API parameters, * update the in-kernel API callers to the new parameters names, * rename of fields names (requests, list, node, constraints) Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-25PM QoS: Move and rename the implementation filesJean Pihet
The PM QoS implementation files are better named kernel/power/qos.c and include/linux/pm_qos.h. The PM QoS support is compiled under the CONFIG_PM option. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-22ASoC: Allow idle_bias_off to be specified in CODEC driversMark Brown
If devices can unconditionally support idle_bias_off let them flag it in their driver structure. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-16ASoC: Add ADAU1373 codec supportLars-Peter Clausen
This patch adds support for the Analog Devices ADAU1373 audio codec. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-12Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-12ASoC: omap: Update e-mail address of Jarkko NikulaJarkko Nikula
My gmail account got disabled and I'm not going to reopen it. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-09Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-08Merge branch 'regmap-asoc' into for-3.2Mark Brown
2011-08-08ASoC: Add regmap as a control typeMark Brown
Allow drivers to set up their own regmap API structures. This is mainly useful with MFDs where the core driver will have set up regmap at the minute, though it may make sense to push the existing regmap setup out of the core into the drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-08ASoC: Use new register map API for ASoC generic physical I/OMark Brown
Remove all the ASoC specific physical I/O code and replace it with calls into the regmap API. The bulk write code can only be used safely if all regmap calls are locked with the CODEC lock, we need to add bulk support to the regmap API or replace the code with an open coded loop (though currently it has no users...). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>