summaryrefslogtreecommitdiff
path: root/kernel/cgroup.c
AgeCommit message (Collapse)Author
2013-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01take cgroup_open() and cpuset_open() to fs/proc/base.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-30Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The main changes in this development cycle were: - full dynticks preparatory work by Frederic Weisbecker - factor out the cpu time accounting code better, by Li Zefan - multi-CPU load balancer cleanups and improvements by Joonsoo Kim - various smaller fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) sched: Fix init NOHZ_IDLE flag sched: Prevent to re-select dst-cpu in load_balance() sched: Rename load_balance_tmpmask to load_balance_mask sched: Move up affinity check to mitigate useless redoing overhead sched: Don't consider other cpus in our group in case of NEWLY_IDLE sched: Explicitly cpu_idle_type checking in rebalance_domains() sched: Change position of resched_cpu() in load_balance() sched: Fix wrong rq's runnable_avg update with rt tasks sched: Document task_struct::personality field sched/cpuacct/UML: Fix header file dependency bug on the UML build cgroup: Kill subsys.active flag sched/cpuacct: No need to check subsys active state sched/cpuacct: Initialize cpuacct subsystem earlier sched/cpuacct: Initialize root cpuacct earlier sched/cpuacct: Allocate per_cpu cpuusage for root cpuacct statically sched/cpuacct: Clean up cpuacct.h sched/cpuacct: Remove redundant NULL checks in cpuacct_acount_field() sched/cpuacct: Remove redundant NULL checks in cpuacct_charge() sched/cpuacct: Add cpuacct_acount_field() sched/cpuacct: Add cpuacct_init() ...
2013-04-30Merge branch 'for-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Fixes and a lot of cleanups. Locking cleanup is finally complete. cgroup_mutex is no longer exposed to individual controlelrs which used to cause nasty deadlock issues. Li fixed and cleaned up quite a bit including long standing ones like racy cgroup_path(). - device cgroup now supports proper hierarchy thanks to Aristeu. - perf_event cgroup now supports proper hierarchy. - A new mount option "__DEVEL__sane_behavior" is added. As indicated by the name, this option is to be used for development only at this point and generates a warning message when used. Unfortunately, cgroup interface currently has too many brekages and inconsistencies to implement a consistent and unified hierarchy on top. The new flag is used to collect the behavior changes which are necessary to implement consistent unified hierarchy. It's likely that this flag won't be used verbatim when it becomes ready but will be enabled implicitly along with unified hierarchy. The option currently disables some of broken behaviors in cgroup core and also .use_hierarchy switch in memcg (will be routed through -mm), which can be used to make very unusual hierarchy where nesting is partially honored. It will also be used to implement hierarchy support for blk-throttle which would be impossible otherwise without introducing a full separate set of control knobs. This is essentially versioning of interface which isn't very nice but at this point I can't see any other options which would allow keeping the interface the same while moving towards hierarchy behavior which is at least somewhat sane. The planned unified hierarchy is likely to require some level of adaptation from userland anyway, so I think it'd be best to take the chance and update the interface such that it's supportable in the long term. Maintaining the existing interface does complicate cgroup core but shouldn't put too much strain on individual controllers and I think it'd be manageable for the foreseeable future. Maybe we'll be able to drop it in a decade. Fix up conflicts (including a semantic one adding a new #include to ppc that was uncovered by header the file changes) as per Tejun. * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (45 commits) cpuset: fix compile warning when CONFIG_SMP=n cpuset: fix cpu hotplug vs rebuild_sched_domains() race cpuset: use rebuild_sched_domains() in cpuset_hotplug_workfn() cgroup: restore the call to eventfd->poll() cgroup: fix use-after-free when umounting cgroupfs cgroup: fix broken file xattrs devcg: remove parent_cgroup. memcg: force use_hierarchy if sane_behavior cgroup: remove cgrp->top_cgroup cgroup: introduce sane_behavior mount option move cgroupfs_root to include/linux/cgroup.h cgroup: convert cgroupfs_root flag bits to masks and add CGRP_ prefix cgroup: make cgroup_path() not print double slashes Revert "cgroup: remove bind() method from cgroup_subsys." perf: make perf_event cgroup hierarchical cgroup: implement cgroup_is_descendant() cgroup: make sure parent won't be destroyed before its children cgroup: remove bind() method from cgroup_subsys. devcg: remove broken_hierarchy tag cgroup: remove cgroup_lock_is_held() ...
2013-04-30Merge branch 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue updates from Tejun Heo: "A lot of activities on workqueue side this time. The changes achieve the followings. - WQ_UNBOUND workqueues - the workqueues which are per-cpu - are updated to be able to interface with multiple backend worker pools. This involved a lot of churning but the end result seems actually neater as unbound workqueues are now a lot closer to per-cpu ones. - The ability to interface with multiple backend worker pools are used to implement unbound workqueues with custom attributes. Currently the supported attributes are the nice level and CPU affinity. It may be expanded to include cgroup association in future. The attributes can be specified either by calling apply_workqueue_attrs() or through /sys/bus/workqueue/WQ_NAME/* if the workqueue in question is exported through sysfs. The backend worker pools are keyed by the actual attributes and shared by any workqueues which share the same attributes. When attributes of a workqueue are changed, the workqueue binds to the worker pool with the specified attributes while leaving the work items which are already executing in its previous worker pools alone. This allows converting custom worker pool implementations which want worker attribute tuning to use workqueues. The writeback pool is already converted in block tree and there are a couple others are likely to follow including btrfs io workers. - WQ_UNBOUND's ability to bind to multiple worker pools is also used to make it NUMA-aware. Because there's no association between work item issuer and the specific worker assigned to execute it, before this change, using unbound workqueue led to unnecessary cross-node bouncing and it couldn't be helped by autonuma as it requires tasks to have implicit node affinity and workers are assigned randomly. After these changes, an unbound workqueue now binds to multiple NUMA-affine worker pools so that queued work items are executed in the same node. This is turned on by default but can be disabled system-wide or for individual workqueues. Crypto was requesting NUMA affinity as encrypting data across different nodes can contribute noticeable overhead and doing it per-cpu was too limiting for certain cases and IO throughput could be bottlenecked by one CPU being fully occupied while others have idle cycles. While the new features required a lot of changes including restructuring locking, it didn't complicate the execution paths much. The unbound workqueue handling is now closer to per-cpu ones and the new features are implemented by simply associating a workqueue with different sets of backend worker pools without changing queue, execution or flush paths. As such, even though the amount of change is very high, I feel relatively safe in that it isn't likely to cause subtle issues with basic correctness of work item execution and handling. If something is wrong, it's likely to show up as being associated with worker pools with the wrong attributes or OOPS while workqueue attributes are being changed or during CPU hotplug. While this creates more backend worker pools, it doesn't add too many more workers unless, of course, there are many workqueues with unique combinations of attributes. Assuming everything else is the same, NUMA awareness costs an extra worker pool per NUMA node with online CPUs. There are also a couple things which are being routed outside the workqueue tree. - block tree pulled in workqueue for-3.10 so that writeback worker pool can be converted to unbound workqueue with sysfs control exposed. This simplifies the code, makes writeback workers NUMA-aware and allows tuning nice level and CPU affinity via sysfs. - The conversion to workqueue means that there's no 1:1 association between a specific worker, which makes writeback folks unhappy as they want to be able to tell which filesystem caused a problem from backtrace on systems with many filesystems mounted. This is resolved by allowing work items to set debug info string which is printed when the task is dumped. As this change involves unifying implementations of dump_stack() and friends in arch codes, it's being routed through Andrew's -mm tree." * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (84 commits) workqueue: use kmem_cache_free() instead of kfree() workqueue: avoid false negative WARN_ON() in destroy_workqueue() workqueue: update sysfs interface to reflect NUMA awareness and a kernel param to disable NUMA affinity workqueue: implement NUMA affinity for unbound workqueues workqueue: introduce put_pwq_unlocked() workqueue: introduce numa_pwq_tbl_install() workqueue: use NUMA-aware allocation for pool_workqueues workqueue: break init_and_link_pwq() into two functions and introduce alloc_unbound_pwq() workqueue: map an unbound workqueues to multiple per-node pool_workqueues workqueue: move hot fields of workqueue_struct to the end workqueue: make workqueue->name[] fixed len workqueue: add workqueue->unbound_attrs workqueue: determine NUMA node of workers accourding to the allowed cpumask workqueue: drop 'H' from kworker names of unbound worker pools workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[] workqueue: move pwq_pool_locking outside of get/put_unbound_pool() workqueue: fix memory leak in apply_workqueue_attrs() workqueue: fix unbound workqueue attrs hashing / comparison workqueue: fix race condition in unbound workqueue free path workqueue: remove pwq_lock which is no longer used ...
2013-04-29cgroup: remove css_get_nextMichal Hocko
Now that we have generic and well ordered cgroup tree walkers there is no need to keep css_get_next in the place. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Ying Han <yinghan@google.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-26cgroup: restore the call to eventfd->poll()Li Zefan
I mistakenly removed the call to eventfd->poll() while I was actually intending to remove the return value... Calling evenfd->poll() will hook cgroup_event_wake() to the poll waitqueue, which will be called to unregister eventfd when rmdir a cgroup or close eventfd. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-26cgroup: fix use-after-free when umounting cgroupfsLi Zefan
Try: # mount -t cgroup xxx /cgroup # mkdir /cgroup/sub && rmdir /cgroup/sub && umount /cgroup And you might see this: ida_remove called for id=1 which is not allocated. It's because cgroup_kill_sb() is called to destroy root->cgroup_ida and free cgrp->root before ida_simple_removed() is called. What's worse is we're accessing cgrp->root while it has been freed. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-19cgroup: fix broken file xattrsLi Zefan
We should store file xattrs in struct cfent instead of struct cftype, because cftype is a type while cfent is object instance of cftype. For example each cgroup has a tasks file, and each tasks file is associated with a uniq cfent, but all those files share the same struct cftype. Alexey Kodanev reported a crash, which can be reproduced: # mount -t cgroup -o xattr /sys/fs/cgroup # mkdir /sys/fs/cgroup/test # setfattr -n trusted.value -v test_value /sys/fs/cgroup/tasks # rmdir /sys/fs/cgroup/test # umount /sys/fs/cgroup oops! In this case, simple_xattrs_free() will free the same struct simple_xattrs twice. tj: Dropped unused local variable @cft from cgroup_diput(). Cc: <stable@vger.kernel.org> # 3.8.x Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-15cgroup: remove cgrp->top_cgroupLi Zefan
It's not used, and it can be retrieved via cgrp->root->top_cgroup. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-15cgroup: introduce sane_behavior mount optionTejun Heo
It's a sad fact that at this point various cgroup controllers are carrying so many idiosyncrasies and pure insanities that it simply isn't possible to reach any sort of sane consistent behavior while maintaining staying fully compatible with what already has been exposed to userland. As we can't break exposed userland interface, transitioning to sane behaviors can only be done in steps while maintaining backwards compatibility. This patch introduces a new mount option - __DEVEL__sane_behavior - which disables crazy features and enforces consistent behaviors in cgroup core proper and various controllers. As exactly which behaviors it changes are still being determined, the mount option, at this point, is useful only for development of the new behaviors. As such, the mount option is prefixed with __DEVEL__ and generates a warning message when used. Eventually, once we get to the point where all controller's behaviors are consistent enough to implement unified hierarchy, the __DEVEL__ prefix will be dropped, and more importantly, unified-hierarchy will enforce sane_behavior by default. Maybe we'll able to completely drop the crazy stuff after a while, maybe not, but we at least have a strategy to move on to saner behaviors. This patch introduces the mount option and changes the following behaviors in cgroup core. * Mount options "noprefix" and "clone_children" are disallowed. Also, cgroupfs file cgroup.clone_children is not created. * When mounting an existing superblock, mount options should match. This is currently pretty crazy. If one mounts a cgroup, creates a subdirectory, unmounts it and then mount it again with different option, it looks like the new options are applied but they aren't. * Remount is disallowed. The behaviors changes are documented in the comment above CGRP_ROOT_SANE_BEHAVIOR enum and will be expanded as different controllers are converted and planned improvements progress. v2: Dropped unnecessary explicit file permission setting sane_behavior cftype entry as suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vivek Goyal <vgoyal@redhat.com>
2013-04-15move cgroupfs_root to include/linux/cgroup.hTejun Heo
While controllers shouldn't be accessing cgroupfs_root directly, it being hidden inside kern/cgroup.c makes somethings pretty silly. This makes routing hierarchy-wide settings which need to be visible to controllers cumbersome. We're gonna add another hierarchy-wide setting which needs to be accessed from controllers. Move cgroupfs_root and its flags to the header file so that we can access root settings with inline helpers. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Li Zefan <lizefan@huawei.com>
2013-04-15cgroup: convert cgroupfs_root flag bits to masks and add CGRP_ prefixTejun Heo
There's no reason to be using bitops, which tends to be more cumbersome, to handle root flags. Convert them to masks. Also, as they'll be moved to include/linux/cgroup.h and it's generally a good idea, add CGRP_ prefix. Note that flags are assigned from (1 << 1). The first bit will be used by a flag which will be added soon. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Li Zefan <lizefan@huawei.com>
2013-04-14cgroup: make cgroup_path() not print double slashesTejun Heo
While reimplementing cgroup_path(), 65dff759d2 ("cgroup: fix cgroup_path() vs rename() race") introduced a bug where the path of a non-root cgroup would have two slahses at the beginning, which is caused by treating the root cgroup which has the name '/' like non-root cgroups. $ grep systemd /proc/self/cgroup 1:name=systemd://user/root/1 Fix it by special casing root cgroup case and not looping over it in the normal path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com>
2013-04-12Revert "cgroup: remove bind() method from cgroup_subsys."Tejun Heo
This reverts commit 84cfb6ab484b442d5115eb3baf9db7d74a3ea626. There are scheduled changes which make use of the removed callback. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rami Rosen <ramirose@gmail.com> Cc: Li Zefan <lizefan@huawei.com>
2013-04-10cgroup: implement cgroup_is_descendant()Li Zefan
A couple controllers want to determine whether two cgroups are in ancestor/descendant relationship. As it's more likely that the descendant is the primary subject of interest and there are other operations focusing on the descendants, let's ask is_descendent rather than is_ancestor. Implementation is trivial as the previous patch guarantees that all ancestors of a cgroup stay accessible as long as the cgroup is accessible. tj: Removed depth optimization, renamed from cgroup_is_ancestor(), rewrote descriptions. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-10cgroup: make sure parent won't be destroyed before its childrenLi Zefan
Suppose we rmdir a cgroup and there're still css refs, this cgroup won't be freed. Then we rmdir the parent cgroup, and the parent is freed immediately due to css ref draining to 0. Now it would be a disaster if the still-alive child cgroup tries to access its parent. Make sure this won't happen. Signed-off-by: Li Zefan <lizefan@huawei.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-10cgroup: remove bind() method from cgroup_subsys.Rami Rosen
The bind() method of cgroup_subsys is not used in any of the controllers (cpuset, freezer, blkio, net_cls, memcg, net_prio, devices, perf, hugetlb, cpu and cpuacct) tj: Removed the entry on ->bind() from Documentation/cgroups/cgroups.txt. Also updated a couple paragraphs which were suggesting that dynamic re-binding may be implemented. It's not gonna. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-10cgroup: Kill subsys.active flagLi Zefan
The only user was cpuacct. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5155385A.4040207@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-07cgroup: remove cgroup_lock_is_held()Tejun Heo
We don't want controllers to assume that the information is officially available and do funky things with it. The only user is task_subsys_state_check() which uses it to verify RCU access context. We can move cgroup_lock_is_held() inside CONFIG_PROVE_RCU but that doesn't add meaningful protection compared to conditionally exposing cgroup_mutex. Remove cgroup_lock_is_held(), export cgroup_mutex iff CONFIG_PROVE_RCU and use lockdep_is_held() directly on the mutex in task_subsys_state_check(). While at it, add parentheses around macro arguments in task_subsys_state_check(). Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-04-07cgroup: kill cgroup_[un]lock()Tejun Heo
Now that locking interface is unexported, there's no reason to keep around these thin wrappers. Kill them and use mutex operations directly. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-04-07cgroup: unexport locking interface and cgroup_attach_task()Tejun Heo
Now that all external cgroup_lock() users are gone, we can finally unexport the locking interface and prevent future abuse of cgroup_mutex. Make cgroup_[un]lock() and cgroup_lock_live_group() static. Also, cgroup_attach_task() doesn't have any user left and can't be used without locking interface anyway. Make it static too. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-04-07cgroup: relocate cgroup_lock_live_group() and cgroup_attach_task_all()Tejun Heo
cgroup_lock_live_group() and cgroup_attach_task() are scheduled to be made static. Relocate the former and cgroup_attach_task_all() so that we don't need forward declarations. This patch is pure relocation. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-04-07cgroup, cpuset: replace move_member_tasks_to_cpuset() with ↵Tejun Heo
cgroup_transfer_tasks() When a cpuset becomes empty (no CPU or memory), its tasks are transferred with the nearest ancestor with execution resources. This is implemented using cgroup_scan_tasks() with a callback which grabs cgroup_mutex and invokes cgroup_attach_task() on each task. Both cgroup_mutex and cgroup_attach_task() are scheduled to be unexported. Implement cgroup_transfer_tasks() in cgroup proper which is essentially the same as move_member_tasks_to_cpuset() except that it takes cgroups instead of cpusets and @to comes before @from like normal functions with those arguments, and replace move_member_tasks_to_cpuset() with it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
2013-04-03cgroup: remove unused parameter in cgroup_task_migrate().Kevin Wilson
This patch removes unused parameter from cgroup_task_migrate(). Signed-off-by: Kevin Wilson <wkevils@gmail.com> Acked-by: Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-20cgroup: consolidate cgroup_attach_task() and cgroup_attach_proc()Li Zefan
These two functions share most of the code. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-20cgroup: fix an off-by-one bug which may trigger BUG_ON()Li Zefan
The 3rd parameter of flex_array_prealloc() is the number of elements, not the index of the last element. The effect of the bug is, when opening cgroup.procs, a flex array will be allocated and all elements of the array is allocated with GFP_KERNEL flag, but the last one is GFP_ATOMIC, and if we fail to allocate memory for it, it'll trigger a BUG_ON(). Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-03-19sched: replace PF_THREAD_BOUND with PF_NO_SETAFFINITYTejun Heo
PF_THREAD_BOUND was originally used to mark kernel threads which were bound to a specific CPU using kthread_bind() and a task with the flag set allows cpus_allowed modifications only to itself. Workqueue is currently abusing it to prevent userland from meddling with cpus_allowed of workqueue workers. What we need is a flag to prevent userland from messing with cpus_allowed of certain kernel tasks. In kernel, anyone can (incorrectly) squash the flag, and, for worker-type usages, restricting cpus_allowed modification to the task itself doesn't provide meaningful extra proection as other tasks can inject work items to the task anyway. This patch replaces PF_THREAD_BOUND with PF_NO_SETAFFINITY. sched_setaffinity() checks the flag and return -EINVAL if set. set_cpus_allowed_ptr() is no longer affected by the flag. This will allow simplifying workqueue worker CPU affinity management. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-03-12cgroup: remove useless code in cgroup_write_event_control()Li Zefan
eventfd_poll() never returns POLLHUP. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-12cgroup: don't bother to resize pid arrayLi Zefan
When we open cgroup.procs, we'll allocate an buffer and store all tasks' tgid in it, and then duplicate entries will be stripped. If that results in a much smaller pid list, we'll re-allocate a smaller buffer. But we've already sucessfully allocated memory and reading the procs file is a short period and the memory will be freed very soon, so why bother to re-allocate memory. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-12cgroup: hold cgroup_mutex before calling css_offline()Li Zefan
cpuset no longer nests cgroup_mutex inside cpu_hotplug lock, so we don't have to release cgroup_mutex before calling css_offline(). Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-12cgroup: remove unused variables in cgroup_destroy_locked()Li Zefan
Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-12cgroup: remove cgroup_is_descendant()Li Zefan
It was used by ns cgroup, and ns cgroup was removed long ago. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-05cgroup: avoid accessing modular cgroup subsys structure without lockingLi Zefan
subsys[i] is set to NULL in cgroup_unload_subsys() at modular unload, and that's protected by cgroup_mutex, and then the memory *subsys[i] resides will be freed. So this is unsafe without any locking: if (!ss || ss->module) ... v2: - add a comment for enum cgroup_subsys_id - simplify the comment in cgroup_exit() Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-04cgroup: no need to check css refs for release notificationLi Zefan
We no longer fail rmdir() when there're still css refs, so we don't need to check css refs in check_for_release(). This also voids a bug. cgroup_has_css_refs() accesses subsys[i] without cgroup_mutex, so it can race with cgroup_unload_subsys(). cgroup_has_css_refs() ... if (ss == NULL || ss->root != cgrp->root) if ss pointers to net_cls_subsys, and cls_cgroup module is unloaded right after the former check but before the latter, the memory that net_cls_subsys resides has become invalid. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-04cgroup: fix cgroup_path() vs rename() raceLi Zefan
rename() will change dentry->d_name. The result of this race can be worse than seeing partially rewritten name, but we might access a stale pointer because rename() will re-allocate memory to hold a longer name. As accessing dentry->name must be protected by dentry->d_lock or parent inode's i_mutex, while on the other hand cgroup-path() can be called with some irq-safe spinlocks held, we can't generate cgroup path using dentry->d_name. Alternatively we make a copy of dentry->d_name and save it in cgrp->name when a cgroup is created, and update cgrp->name at rename(). v5: use flexible array instead of zero-size array. v4: - allocate root_cgroup_name and all root_cgroup->name points to it. - add cgroup_name() wrapper. v3: use kfree_rcu() instead of synchronize_rcu() in user-visible path. v2: make cgrp->name RCU safe. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-02-28hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28cgroup: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28cgroup: don't use idr_remove_all()Tejun Heo
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-23new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-18cgroup: fail if monitored file and event_control are in different cgroupLi Zefan
If we pass fd of memory.usage_in_bytes of cgroup A to cgroup.event_control of cgroup B, then we won't get memory usage notification from A but B! What's worse, if A and B are in different mount hierarchy, we'll end up accessing NULL pointer! Disallow this kind of invalid usage. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-02-18cgroup: fix cgroup_rmdir() vs close(eventfd) raceLi Zefan
commit 205a872bd6f9a9a09ef035ef1e90185a8245cc58 ("cgroup: fix lockdep warning for event_control") solved a deadlock by introducing a new bug. Move cgrp->event_list to a temporary list doesn't mean you can traverse this list locklessly, because at the same time cgroup_event_wake() can be called and remove the event from the list. The result of this race is disastrous. We adopt the way how kvm irqfd code implements race-free event removal, which is now described in the comments in cgroup_event_wake(). v3: - call eventfd_signal() no matter it's eventfd close or cgroup removal that removes the cgroup event. Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-02-18cgroup: fix exit() vs rmdir() raceLi Zefan
In cgroup_exit() put_css_set_taskexit() is called without any lock, which might lead to accessing a freed cgroup: thread1 thread2 --------------------------------------------- exit() cgroup_exit() put_css_set_taskexit() atomic_dec(cgrp->count); rmdir(); /* not safe !! */ check_for_release(cgrp); rcu_read_lock() can be used to make sure the cgroup is alive. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2013-01-24cgroup: remove bogus comments in cgroup_diput()Li Zefan
Since commit 48ddbe194623ae089cc0576e60363f2d2e85662a ("cgroup: make css->refcnt clearing on cgroup removal optional"), each css holds a ref on cgroup's dentry, so cgroup_diput() won't be called until all css' refs go down to 0, which invalids the comments. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-24cgroup: remove synchronize_rcu() from cgroup_diput()Li Zefan
Free cgroup via call_rcu(). The actual work is done through workqueue. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-24cgroup: remove duplicate RCU free on struct cgroupLi Zefan
When destroying a cgroup, though in cgroup_diput() we've called synchronize_rcu(), we then still have to free it via call_rcu(). The story is, long ago to fix a race between reading /proc/sched_debug and freeing cgroup, the code was changed to utilize call_rcu(). See commit a47295e6bc42ad35f9c15ac66f598aa24debd4e2 ("cgroups: make cgroup_path() RCU-safe") As we've fixed cpu cgroup that cpu_cgroup_offline_css() is used to unregister a task_group so there won't be concurrent access to this task_group after synchronize_rcu() in diput(). Now we can just kfree(cgrp). Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-24cgroup: initialize cgrp->dentry before css_alloc()Li Zefan
With this change, we're guaranteed that cgroup_path() won't see NULL cgrp->dentry, and thus we can remove the NULL check in it. (Well, it's not strictly true, because dummptop.dentry is always NULL but we already handle that separately.) Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-24cgroup: remove a NULL check in cgroup_exit()Li Zefan
init_task.cgroups is initialized at boot phase, and whenver a ask is forked, it's cgroups pointer is inherited from its parent, and it's never set to NULL afterwards. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-23cgroup: fix bogus kernel warnings when cgroup_create() failedLi Zefan
If cgroup_create() failed and cgroup_destroy_locked() is called to do cleanup, we'll see a bunch of warnings: cgroup_addrm_files: failed to remove 2MB.limit_in_bytes, err=-2 cgroup_addrm_files: failed to remove 2MB.usage_in_bytes, err=-2 cgroup_addrm_files: failed to remove 2MB.max_usage_in_bytes, err=-2 cgroup_addrm_files: failed to remove 2MB.failcnt, err=-2 cgroup_addrm_files: failed to remove prioidx, err=-2 cgroup_addrm_files: failed to remove ifpriomap, err=-2 ... We failed to remove those files, because cgroup_create() has failed before creating those cgroup files. To fix this, we simply don't warn if cgroup_rm_file() can't find the cft entry. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>