summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2012-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
2012-08-01Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull irqdomain changes from Grant Likely: "Round of refactoring and enhancements to irq_domain infrastructure. This series starts the process of simplifying irqdomain. The ultimate goal is to merge LEGACY, LINEAR and TREE mappings into a single system, but had to back off from that after some last minute bugs. Instead it mainly reorganizes the code and ensures that the reverse map gets populated when the irq is mapped instead of the first time it is looked up. Merging of the irq_domain types is deferred to v3.7 In other news, this series adds helpers for creating static mappings on a linear or tree mapping." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irqdomain: Improve diagnostics when a domain mapping fails irqdomain: eliminate slow-path revmap lookups irqdomain: Fix irq_create_direct_mapping() to test irq_domain type. irqdomain: Eliminate dedicated radix lookup functions irqdomain: Support for static IRQ mapping and association. irqdomain: Always update revmap when setting up a virq irqdomain: Split disassociating code into separate function irq_domain: correct a minor wrong comment for linear revmap irq_domain: Standardise legacy/linear domain selection irqdomain: Make ops->map hook optional irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY irqdomain: Simple NUMA awareness. devicetree: add helper inline for retrieving a node's full name
2012-08-01Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge Andrew's second set of patches: - MM - a few random fixes - a couple of RTC leftovers * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) rtc/rtc-88pm80x: remove unneed devm_kfree rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables tmpfs: distribute interleave better across nodes mm: remove redundant initialization mm: warn if pg_data_t isn't initialized with zero mips: zero out pg_data_t when it's allocated memcg: gix memory accounting scalability in shrink_page_list mm/sparse: remove index_init_lock mm/sparse: more checks on mem_section number mm/sparse: optimize sparse_index_alloc memcg: add mem_cgroup_from_css() helper memcg: further prevent OOM with too many dirty pages memcg: prevent OOM with too many dirty pages mm: mmu_notifier: fix freed page still mapped in secondary MMU mm: memcg: only check anon swapin page charges for swap cache mm: memcg: only check swap cache pages for repeated charging mm: memcg: split swapin charge function into private and public part mm: memcg: remove needless !mm fixup to init_mm when charging mm: memcg: remove unneeded shmem charge type ...
2012-08-01Merge tag 'random_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ...
2012-08-01mm: allow PF_MEMALLOC from softirq contextMel Gorman
This is needed to allow network softirq packet processing to make use of PF_MEMALLOC. Currently softirq context cannot use PF_MEMALLOC due to it not being associated with a task, and therefore not having task flags to fiddle with - thus the gfp to alloc flag mapping ignores the task flags when in interrupts (hard or soft) context. Allowing softirqs to make use of PF_MEMALLOC therefore requires some trickery. This patch borrows the task flags from whatever process happens to be preempted by the softirq. It then modifies the gfp to alloc flags mapping to not exclude task flags in softirq context, and modify the softirq code to save, clear and restore the PF_MEMALLOC flag. The save and clear, ensures the preempted task's PF_MEMALLOC flag doesn't leak into the softirq. The restore ensures a softirq's PF_MEMALLOC flag cannot leak back into the preempted process. This should be safe due to the following reasons Softirqs can run on multiple CPUs sure but the same task should not be executing the same softirq code. Neither should the softirq handler be preempted by any other softirq handler so the flags should not leak to an unrelated softirq. Softirqs re-enable hardware interrupts in __do_softirq() so can be preempted by hardware interrupts so PF_MEMALLOC is inherited by the hard IRQ. However, this is similar to a process in reclaim being preempted by a hardirq. While PF_MEMALLOC is set, gfp_to_alloc_flags() distinguishes between hard and soft irqs and avoids giving a hardirq the ALLOC_NO_WATERMARKS flag. If the softirq is deferred to ksoftirq then its flags may be used instead of a normal tasks but as the softirq cannot be preempted, the PF_MEMALLOC flag does not leak to other code by accident. [davem@davemloft.net: Document why PF_MEMALLOC is safe] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Miller <davem@davemloft.net> Cc: Neil Brown <neilb@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01mm/hotplug: correctly setup fallback zonelists when creating new pgdatJiang Liu
When hotadd_new_pgdat() is called to create new pgdat for a new node, a fallback zonelist should be created for the new node. There's code to try to achieve that in hotadd_new_pgdat() as below: /* * The node we allocated has no zone fallback lists. For avoiding * to access not-initialized zonelist, build here. */ mutex_lock(&zonelists_mutex); build_all_zonelists(pgdat, NULL); mutex_unlock(&zonelists_mutex); But it doesn't work as expected. When hotadd_new_pgdat() is called, the new node is still in offline state because node_set_online(nid) hasn't been called yet. And build_all_zonelists() only builds zonelists for online nodes as: for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); build_zonelists(pgdat); build_zonelist_cache(pgdat); } Though we hope to create zonelist for the new pgdat, but it doesn't. So add a new parameter "pgdat" the build_all_zonelists() to build pgdat for the new pgdat too. Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Keping Chen <chenkeping@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01memcg: rename config variablesAndrew Morton
Sanity: CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM [mhocko@suse.cz: fix missed bits] Cc: Glauber Costa <glommer@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01mm: prepare for removal of obsolete /proc/sys/vm/nr_pdflush_threadsWanpeng Li
Since per-BDI flusher threads were introduced in 2.6, the pdflush mechanism is not used any more. But the old interface exported through /proc/sys/vm/nr_pdflush_threads still exists and is obviously useless. For back-compatibility, printk warning information and return 2 to notify the users that the interface is removed. Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-01mm: account the total_vm in the vm_stat_account()Huang Shijie
vm_stat_account() accounts the shared_vm, stack_vm and reserved_vm now. But we can also account for total_vm in the vm_stat_account() which makes the code tidy. Even for mprotect_fixup(), we can get the right result in the end. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The biggest changes are Intel Nehalem-EX PMU uncore support, uprobes updates/cleanups/fixes from Oleg and diverse tooling updates (mostly fixes) now that Arnaldo is back from vacation." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) uprobes: __replace_page() needs munlock_vma_page() uprobes: Rename vma_address() and make it return "unsigned long" uprobes: Fix register_for_each_vma()->vma_address() check uprobes: Introduce vaddr_to_offset(vma, vaddr) uprobes: Teach build_probe_list() to consider the range uprobes: Remove insert_vm_struct()->uprobe_mmap() uprobes: Remove copy_vma()->uprobe_mmap() uprobes: Fix overflow in vma_address()/find_active_uprobe() uprobes: Suppress uprobe_munmap() from mmput() uprobes: Uprobe_mmap/munmap needs list_for_each_entry_safe() uprobes: Clean up and document write_opcode()->lock_page(old_page) uprobes: Kill write_opcode()->lock_page(new_page) uprobes: __replace_page() should not use page_address_in_vma() uprobes: Don't recheck vma/f_mapping in write_opcode() perf/x86: Fix missing struct before structure name perf/x86: Fix format definition of SNB-EP uncore QPI box perf/x86: Make bitfield unsigned perf/x86: Fix LLC-* and node-* events on Intel SandyBridge perf/x86: Add Intel Nehalem-EX uncore support perf/x86: Fix typo in format definition of uncore PCU filter ...
2012-07-31resource: make sure requested range is included in the root rangeOctavian Purdila
When the requested range is outside of the root range the logic in __reserve_region_with_split will cause an infinite recursion which will overflow the stack as seen in the warning bellow. This particular stack overflow was caused by requesting the (100000000-107ffffff) range while the root range was (0-ffffffff). In this case __request_resource would return the whole root range as conflict range (i.e. 0-ffffffff). Then, the logic in __reserve_region_with_split would continue the recursion requesting the new range as (conflict->end+1, end) which incidentally in this case equals the originally requested range. This patch aborts looking for an usable range when the request does not intersect with the root range. When the request partially overlaps with the root range, it ajust the request to fall in the root range and then continues with the new request. When the request is modified or aborted errors and a stack trace are logged to allow catching the errors in the upper layers. [ 5.968374] WARNING: at kernel/sched.c:4129 sub_preempt_count+0x63/0x89() [ 5.975150] Modules linked in: [ 5.978184] Pid: 1, comm: swapper Not tainted 3.0.22-mid27-00004-gb72c817 #46 [ 5.985324] Call Trace: [ 5.987759] [<c1039dfc>] ? console_unlock+0x17b/0x18d [ 5.992891] [<c1039620>] warn_slowpath_common+0x48/0x5d [ 5.998194] [<c1031758>] ? sub_preempt_count+0x63/0x89 [ 6.003412] [<c1039644>] warn_slowpath_null+0xf/0x13 [ 6.008453] [<c1031758>] sub_preempt_count+0x63/0x89 [ 6.013499] [<c14d60c4>] _raw_spin_unlock+0x27/0x3f [ 6.018453] [<c10c6349>] add_partial+0x36/0x3b [ 6.022973] [<c10c7c0a>] deactivate_slab+0x96/0xb4 [ 6.027842] [<c14cf9d9>] __slab_alloc.isra.54.constprop.63+0x204/0x241 [ 6.034456] [<c103f78f>] ? kzalloc.constprop.5+0x29/0x38 [ 6.039842] [<c103f78f>] ? kzalloc.constprop.5+0x29/0x38 [ 6.045232] [<c10c7dc9>] kmem_cache_alloc_trace+0x51/0xb0 [ 6.050710] [<c103f78f>] ? kzalloc.constprop.5+0x29/0x38 [ 6.056100] [<c103f78f>] kzalloc.constprop.5+0x29/0x38 [ 6.061320] [<c17b45e9>] __reserve_region_with_split+0x1c/0xd1 [ 6.067230] [<c17b4693>] __reserve_region_with_split+0xc6/0xd1 ... [ 7.179057] [<c17b4693>] __reserve_region_with_split+0xc6/0xd1 [ 7.184970] [<c17b4779>] reserve_region_with_split+0x30/0x42 [ 7.190709] [<c17a8ebf>] e820_reserve_resources_late+0xd1/0xe9 [ 7.196623] [<c17c9526>] pcibios_resource_survey+0x23/0x2a [ 7.202184] [<c17cad8a>] pcibios_init+0x23/0x35 [ 7.206789] [<c17ca574>] pci_subsys_init+0x3f/0x44 [ 7.211659] [<c1002088>] do_one_initcall+0x72/0x122 [ 7.216615] [<c17ca535>] ? pci_legacy_init+0x3d/0x3d [ 7.221659] [<c17a27ff>] kernel_init+0xa6/0x118 [ 7.226265] [<c17a2759>] ? start_kernel+0x334/0x334 [ 7.231223] [<c14d7482>] kernel_thread_helper+0x6/0x10 Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31taskstats: check nla_reserve() returnAlan Cox
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=44621 Reported-by: <rucsoftsec@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31sysctl: suppress kmemleak messagesSteven Rostedt
register_sysctl_table() is a strange function, as it makes internal allocations (a header) to register a sysctl_table. This header is a handle to the table that is created, and can be used to unregister the table. But if the table is permanent and never unregistered, the header acts the same as a static variable. Unfortunately, this allocation of memory that is never expected to be freed fools kmemleak in thinking that we have leaked memory. For those sysctl tables that are never unregistered, and have no pointer referencing them, kmemleak will think that these are memory leaks: unreferenced object 0xffff880079fb9d40 (size 192): comm "swapper/0", pid 0, jiffies 4294667316 (age 12614.152s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8146b590>] kmemleak_alloc+0x73/0x98 [<ffffffff8110a935>] kmemleak_alloc_recursive.constprop.42+0x16/0x18 [<ffffffff8110b852>] __kmalloc+0x107/0x153 [<ffffffff8116fa72>] kzalloc.constprop.8+0xe/0x10 [<ffffffff811703c9>] __register_sysctl_paths+0xe1/0x160 [<ffffffff81170463>] register_sysctl_paths+0x1b/0x1d [<ffffffff8117047d>] register_sysctl_table+0x18/0x1a [<ffffffff81afb0a1>] sysctl_init+0x10/0x14 [<ffffffff81b05a6f>] proc_sys_init+0x2f/0x31 [<ffffffff81b0584c>] proc_root_init+0xa5/0xa7 [<ffffffff81ae5b7e>] start_kernel+0x3d0/0x40a [<ffffffff81ae52a7>] x86_64_start_reservations+0xae/0xb2 [<ffffffff81ae53ad>] x86_64_start_kernel+0x102/0x111 [<ffffffffffffffff>] 0xffffffffffffffff The sysctl_base_table used by sysctl itself is one such instance that registers the table to never be unregistered. Use kmemleak_not_leak() to suppress the kmemleak false positive. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31kdump: append newline to the last lien of vmcoreinfo noteVivek Goyal
The last line of vmcoreinfo note does not end with \n. Parsing all the lines in note becomes easier if all lines end with \n instead of trying to special case the last line. I know at least one tool, vmcore-dmesg in kexec-tools tree which made the assumption that all lines end with \n. I think it is a good idea to fix it. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31fork: fix error handling in dup_task()Akinobu Mita
The function dup_task() may fail at the following function calls in the following order. 0) alloc_task_struct_node() 1) alloc_thread_info_node() 2) arch_dup_task_struct() Error by 0) is not a matter, it can just return. But error by 1) requires releasing task_struct allocated by 0) before it returns. Likewise, error by 2) requires releasing task_struct and thread_info allocated by 0) and 1). The existing error handling calls free_task_struct() and free_thread_info() which do not only release task_struct and thread_info, but also call architecture specific arch_release_task_struct() and arch_release_thread_info(). The problem is that task_struct and thread_info are not fully initialized yet at this point, but arch_release_task_struct() and arch_release_thread_info() are called with them. For example, x86 defines its own arch_release_task_struct() that releases a task_xstate. If alloc_thread_info_node() fails in dup_task(), arch_release_task_struct() is called with task_struct which is just allocated and filled with garbage in this error handling. This actually happened with tools/testing/fault-injection/failcmd.sh # env FAILCMD_TYPE=fail_page_alloc \ ./tools/testing/fault-injection/failcmd.sh --times=100 \ --min-order=0 --ignore-gfp-wait=0 \ -- make -C tools/testing/selftests/ run_tests In order to fix this issue, make free_{task_struct,thread_info}() not to call arch_release_{task_struct,thread_info}() and call arch_release_{task_struct,thread_info}() implicitly where needed. Default arch_release_task_struct() and arch_release_thread_info() are defined as empty by default. So this change only affects the architectures which implement their own arch_release_task_struct() or arch_release_thread_info() as listed below. arch_release_task_struct(): x86, sh arch_release_thread_info(): mn10300, tile Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Salman Qazi <sqazi@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31revert "sched: Fix fork() error path to not crash"Andrew Morton
To make way for "fork: fix error handling in dup_task()", which fixes the errors more completely. Cc: Salman Qazi <sqazi@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31fork: use vma_pages() to simplify the codeHuang Shijie
The current code can be replaced by vma_pages(). So use it to simplify the code. [akpm@linux-foundation.org: initialise `len' at its definition site] Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31kmod: avoid deadlock from recursive kmod callTetsuo Handa
The system deadlocks (at least since 2.6.10) when call_usermodehelper(UMH_WAIT_EXEC) request triggers call_usermodehelper(UMH_WAIT_PROC) request. This is because "khelper thread is waiting for the worker thread at wait_for_completion() in do_fork() since the worker thread was created with CLONE_VFORK flag" and "the worker thread cannot call complete() because do_execve() is blocked at UMH_WAIT_PROC request" and "the khelper thread cannot start processing UMH_WAIT_PROC request because the khelper thread is waiting for the worker thread at wait_for_completion() in do_fork()". The easiest example to observe this deadlock is to use a corrupted /sbin/hotplug binary (like shown below). # : > /tmp/dummy # chmod 755 /tmp/dummy # echo /tmp/dummy > /proc/sys/kernel/hotplug # modprobe whatever call_usermodehelper("/tmp/dummy", UMH_WAIT_EXEC) is called from kobject_uevent_env() in lib/kobject_uevent.c upon loading/unloading a module. do_execve("/tmp/dummy") triggers a call to request_module("binfmt-0000") from search_binary_handler() which in turn calls call_usermodehelper(UMH_WAIT_PROC). In order to avoid deadlock, as a for-now and easy-to-backport solution, do not try to call wait_for_completion() in call_usermodehelper_exec() if the worker thread was created by khelper thread with CLONE_VFORK flag. Future and fundamental solution might be replacing singleton khelper thread with some workqueue so that recursive calls up to max_active dependency loop can be handled without deadlock. [akpm@linux-foundation.org: add comment to kmod_thread_locker] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31kernel/kmod.c: document call_usermodehelper_fns() a bitAndrew Morton
This function's interface is, uh, subtle. Attempt to apologise for it. Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Kees Cook <keescook@chromium.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31printk: only look for prefix levels in kernel messagesJoe Perches
vprintk_emit() prefix parsing should only be done for internal kernel messages. This allows existing behavior to be kept in all cases. Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31printk: add generic functions to find KERN_<LEVEL> headersJoe Perches
The current form of a KERN_<LEVEL> is "<.>". Add printk_get_level and printk_skip_level functions to handle these formats. These functions centralize tests of KERN_<LEVEL> so a future modification can change the KERN_<LEVEL> style and shorten the number of bytes consumed by these headers. [akpm@linux-foundation.org: fix build error and warning] Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31kmsg: /dev/kmsg - properly return possible copy_from_user() failureKay Sievers
Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31kernel/sys.c: avoid argv_free(NULL)Andrew Morton
If argv_split() failed, the code will end up calling argv_free(NULL). Fix it up and clean things up a bit. Addresses Coverity report 703573. Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Kees Cook <keescook@chromium.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31NMI watchdog: fix for lockup detector breakage on resumeSameer Nanda
On the suspend/resume path the boot CPU does not go though an offline->online transition. This breaks the NMI detector post-resume since it depends on PMU state that is lost when the system gets suspended. Fix this by forcing a CPU offline->online transition for the lockup detector on the boot CPU during resume. To provide more context, we enable NMI watchdog on Chrome OS. We have seen several reports of systems freezing up completely which indicated that the NMI watchdog was not firing for some reason. Debugging further, we found a simple way of repro'ing system freezes -- issuing the command 'tasket 1 sh -c "echo nmilockup > /proc/breakme"' after the system has been suspended/resumed one or more times. With this patch in place, the system freeze result in panics, as expected. These panics provide a nice stack trace for us to debug the actual issue causing the freeze. [akpm@linux-foundation.org: fiddle with code comment] [akpm@linux-foundation.org: make lockup_detector_bootcpu_resume() conditional on CONFIG_SUSPEND] [akpm@linux-foundation.org: fix section errors] Signed-off-by: Sameer Nanda <snanda@chromium.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Don Zickus <dzickus@redhat.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31panic: fix a possible deadlock in panic()Vikram Mulukutla
panic_lock is meant to ensure that panic processing takes place only on one cpu; if any of the other cpus encounter a panic, they will spin waiting to be shut down. However, this causes a regression in this scenario: 1. Cpu 0 encounters a panic and acquires the panic_lock and proceeds with the panic processing. 2. There is an interrupt on cpu 0 that also encounters an error condition and invokes panic. 3. This second invocation fails to acquire the panic_lock and enters the infinite while loop in panic_smp_self_stop. Thus all panic processing is stopped, and the cpu is stuck for eternity in the while(1) inside panic_smp_self_stop. To address this, disable local interrupts with local_irq_disable before acquiring the panic_lock. This will prevent interrupt handlers from executing during the panic processing, thus avoiding this particular problem. Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31coredump: warn about unsafe suid_dumpable / core_pattern comboKees Cook
When suid_dumpable=2, detect unsafe core_pattern settings and warn when they are seen. Signed-off-by: Kees Cook <keescook@chromium.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@linux.intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: James Morris <james.l.morris@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31prctl: remove redunant assignment of "error" to zeroSasikantha babu
Just setting the "error" to error number is enough on failure and It doesn't require to set "error" variable to zero in each switch case, since it was already initialized with zero. And also removed return 0 in switch case with break statement Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Serge E. Hallyn <serge@hallyn.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30uprobes: __replace_page() needs munlock_vma_page()Oleg Nesterov
Like do_wp_page(), __replace_page() should do munlock_vma_page() for the case when the old page still has other !VM_LOCKED mappings. Unfortunately this needs mm/internal.h. Also, move put_page() outside of ptl lock. This doesn't really matter but looks a bit better. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182249.GA20372@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Rename vma_address() and make it return "unsigned long"Oleg Nesterov
1. vma_address() returns loff_t, this looks confusing and this is unnecessary after the previous change. Make it return "ulong", all callers truncate the result anyway. 2. Its name conflicts with mm/rmap.c:vma_address(), rename it to offset_to_vaddr(), this matches vaddr_to_offset(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182247.GA20365@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Fix register_for_each_vma()->vma_address() checkOleg Nesterov
1. register_for_each_vma() checks that vma_address() == vaddr, but this is not enough. We should also ensure that vaddr >= vm_start, find_vma() guarantees "vaddr < vm_end" only. 2. After the prevous changes, register_for_each_vma() is the only reason why vma_address() has to return loff_t, all other users know that we have the valid mapping at this offset and thus the overflow is not possible. Change the code to use vaddr_to_offset() instead, imho this looks more clean/understandable and now we can change vma_address(). 3. While at it, remove the unnecessary type-cast. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182244.GA20362@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Introduce vaddr_to_offset(vma, vaddr)Oleg Nesterov
Add the new helper, vaddr_to_offset(vma, vaddr) which returns the offset in vma->vm_file this vaddr is mapped at. Change build_probe_list() and find_active_uprobe() to use the new helper, the next patch adds another user. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182242.GA20355@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Teach build_probe_list() to consider the rangeOleg Nesterov
Currently build_probe_list() builds the list of all uprobes attached to the given inode, and the caller should filter out those who don't fall into the [start,end) range, this is sub-optimal. This patch turns find_least_offset_node() into find_node_in_range() which returns the first node inside the [min,max] range, and changes build_probe_list() to use this node as a starting point for rb_prev() and rb_next() to find all other nodes the caller needs. The resulting list is no longer sorted but we do not care. This can speed up both build_probe_list() and the callers, but there is another reason to introduce find_node_in_range(). It can be used to figure out whether the given vma has uprobes or not, this will be needed soon. While at it, shift INIT_LIST_HEAD(tmp_list) into build_probe_list(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182240.GA20352@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Fix overflow in vma_address()/find_active_uprobe()Oleg Nesterov
vma->vm_pgoff is "unsigned long", it should be promoted to loff_t before the multiplication to avoid the overflow. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182233.GA20339@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Suppress uprobe_munmap() from mmput()Oleg Nesterov
uprobe_munmap() does get_user_pages() and it is also called from the final mmput()->exit_mmap() path. This slows down exit/mmput() for no reason, and I think it is simply dangerous/wrong to try to fault-in a page into the dying mm. If nothing else, this happens after the last sync_mm_rss(), afaics handle_mm_fault() can change the task->rss_stat and make the subsequent check_mm() unhappy. Change uprobe_munmap() to check mm->mm_users != 0. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182231.GA20336@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Uprobe_mmap/munmap needs list_for_each_entry_safe()Oleg Nesterov
The bug was introduced by me in 449d0d7c ("uprobes: Simplify the usage of uprobe->pending_list"). Yes, we do not care about uprobe->pending_list after return and nobody can remove the current list entry, but put_uprobe(uprobe) can actually free it and thus we need list_for_each_safe(). Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Link: http://lkml.kernel.org/r/20120729182229.GA20329@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Clean up and document write_opcode()->lock_page(old_page)Oleg Nesterov
The comment above write_opcode()->lock_page(old_page) tells about the race with do_wp_page(). I don't really understand which exactly race it means, but afaics this lock_page() was not enough to close all races with do_wp_page(). Anyway, since: 77fc4af1b59d uprobes: Change register_for_each_vma() to take mm->mmap_sem for writing this code is always called with ->mmap_sem held for writing, so we can forget about do_wp_page(). However, we can't simply remove this lock_page(), and the only (afaics) reason is __replace_page()->try_to_free_swap(). Nothing in write_opcode() needs it, move it into __replace_page() and fix the comment. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182220.GA20322@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Kill write_opcode()->lock_page(new_page)Oleg Nesterov
write_opcode() does lock_page(new_page) for no reason. Nobody can see this page until __replace_page() exposes it under ptl lock, and we do nothing with this page after pte_unmap_unlock(). If nothing else, the similar code in do_wp_page() doesn't lock the new page for page_add_new_anon_rmap/set_pte_at_notify. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182218.GA20315@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: __replace_page() should not use page_address_in_vma()Oleg Nesterov
page_address_in_vma(old_page) in __replace_page() is ugly and wrong. The caller already knows the correct virtual address, this page was found by get_user_pages(vaddr). However, page_address_in_vma() can actually fail if page->mapping was cleared by __delete_from_page_cache() after get_user_pages() returns. But this means the race with page reclaim, write_opcode() should not fail, it should retry and read this page again. Probably the race with remove_mapping() is not possible due to page_freeze_refs() logic, but afaics at least shmem_writepage()->shmem_delete_from_page_cache() can clear ->mapping. We could change __replace_page() to return -EAGAIN in this case, but it would be better to simply use the caller's vaddr and rely on page_check_address(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182216.GA20311@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Don't recheck vma/f_mapping in write_opcode()Oleg Nesterov
write_opcode() rechecks valid_vma() and ->f_mapping, this is pointless. The caller, register_for_each_vma() or uprobe_mmap(), has already done these checks under mmap_sem. To clarify, uprobe_mmap() checks valid_vma() only, but we can rely on build_probe_list(vm_file->f_mapping->host). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182212.GA20304@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-29fs: add link restriction audit reportingKees Cook
Adds audit messages for unexpected link restriction violations so that system owners will have some sort of potentially actionable information about misbehaving processes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29fs: add link restrictionsKees Cook
This adds symlink and hardlink restrictions to the Linux VFS. Symlinks: A long-standing class of security issues is the symlink-based time-of-check-time-of-use race, most commonly seen in world-writable directories like /tmp. The common method of exploitation of this flaw is to cross privilege boundaries when following a given symlink (i.e. a root process follows a symlink belonging to another user). For a likely incomplete list of hundreds of examples across the years, please see: http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp The solution is to permit symlinks to only be followed when outside a sticky world-writable directory, or when the uid of the symlink and follower match, or when the directory owner matches the symlink's owner. Some pointers to the history of earlier discussion that I could find: 1996 Aug, Zygo Blaxell http://marc.info/?l=bugtraq&m=87602167419830&w=2 1996 Oct, Andrew Tridgell http://lkml.indiana.edu/hypermail/linux/kernel/9610.2/0086.html 1997 Dec, Albert D Cahalan http://lkml.org/lkml/1997/12/16/4 2005 Feb, Lorenzo Hernández García-Hierro http://lkml.indiana.edu/hypermail/linux/kernel/0502.0/1896.html 2010 May, Kees Cook https://lkml.org/lkml/2010/5/30/144 Past objections and rebuttals could be summarized as: - Violates POSIX. - POSIX didn't consider this situation and it's not useful to follow a broken specification at the cost of security. - Might break unknown applications that use this feature. - Applications that break because of the change are easy to spot and fix. Applications that are vulnerable to symlink ToCToU by not having the change aren't. Additionally, no applications have yet been found that rely on this behavior. - Applications should just use mkstemp() or O_CREATE|O_EXCL. - True, but applications are not perfect, and new software is written all the time that makes these mistakes; blocking this flaw at the kernel is a single solution to the entire class of vulnerability. - This should live in the core VFS. - This should live in an LSM. (https://lkml.org/lkml/2010/5/31/135) - This should live in an LSM. - This should live in the core VFS. (https://lkml.org/lkml/2010/8/2/188) Hardlinks: On systems that have user-writable directories on the same partition as system files, a long-standing class of security issues is the hardlink-based time-of-check-time-of-use race, most commonly seen in world-writable directories like /tmp. The common method of exploitation of this flaw is to cross privilege boundaries when following a given hardlink (i.e. a root process follows a hardlink created by another user). Additionally, an issue exists where users can "pin" a potentially vulnerable setuid/setgid file so that an administrator will not actually upgrade a system fully. The solution is to permit hardlinks to only be created when the user is already the existing file's owner, or if they already have read/write access to the existing file. Many Linux users are surprised when they learn they can link to files they have no access to, so this change appears to follow the doctrine of "least surprise". Additionally, this change does not violate POSIX, which states "the implementation may require that the calling process has permission to access the existing file"[1]. This change is known to break some implementations of the "at" daemon, though the version used by Fedora and Ubuntu has been fixed[2] for a while. Otherwise, the change has been undisruptive while in use in Ubuntu for the last 1.5 years. [1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/linkat.html [2] http://anonscm.debian.org/gitweb/?p=collab-maint/at.git;a=commitdiff;h=f4114656c3a6c6f6070e315ffdf940a49eda3279 This patch is based on the patches in Openwall and grsecurity, along with suggestions from Al Viro. I have added a sysctl to enable the protected behavior, and documentation. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-26posix_types.h: Cleanup stale __NFDBITS and related definitionsJosh Boyer
Recently, glibc made a change to suppress sign-conversion warnings in FD_SET (glibc commit ceb9e56b3d1). This uncovered an issue with the kernel's definition of __NFDBITS if applications #include <linux/types.h> after including <sys/select.h>. A build failure would be seen when passing the -Werror=sign-compare and -D_FORTIFY_SOURCE=2 flags to gcc. It was suggested that the kernel should either match the glibc definition of __NFDBITS or remove that entirely. The current in-kernel uses of __NFDBITS can be replaced with BITS_PER_LONG, and there are no uses of the related __FDELT and __FDMASK defines. Given that, we'll continue the cleanup that was started with commit 8b3d1cda4f5f ("posix_types: Remove fd_set macros") and drop the remaining unused macros. Additionally, linux/time.h has similar macros defined that expand to nothing so we'll remove those at the same time. Reported-by: Jeff Law <law@redhat.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> CC: <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@redhat.com> [ .. and fix up whitespace as per akpm ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-26Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The biggest change is a performance improvement on SMP systems: | 4 socket 40 core + SMT Westmere box, single 30 sec tbench | runs, higher is better: | | clients 1 2 4 8 16 32 64 128 |.......................................................................... | pre 30 41 118 645 3769 6214 12233 14312 | post 299 603 1211 2418 4697 6847 11606 14557 | | A nice increase in performance. which speedup is particularly noticeable on heavily interacting few-tasks workloads, so the changes should help desktop-style Xorg workloads and interactivity as well, on multi-core CPUs. There are also cpuset suspend behavior fixes/restructuring and various smaller tweaks." * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix race in task_group() sched: Improve balance_cpu() to consider other cpus in its group as target of (pinned) task sched: Reset loop counters if all tasks are pinned and we need to redo load balance sched: Reorder 'struct lb_env' members to reduce its size sched: Improve scalability via 'CPU buddies', which withstand random perturbations cpusets: Remove/update outdated comments cpusets, hotplug: Restructure functions that are invoked during hotplug cpusets, hotplug: Implement cpuset tree traversal in a helper function CPU hotplug, cpusets, suspend: Don't modify cpusets during suspend/resume sched/x86: Remove broken power estimation
2012-07-26Merge tag 'driver-core-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg Kroah-Hartman: "Here's the big driver core pull request for 3.6-rc1. Unlike 3.5, this kernel should be a lot tamer, with the printk changes now settled down. All we have here is some extcon driver updates, w1 driver updates, a few printk cleanups that weren't needed for 3.5, but are good to have now, and some other minor fixes/changes in the driver core. All of these have been in the linux-next releases for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits) printk: Export struct log size and member offsets through vmcoreinfo Drivers: hv: Change the hex constant to a decimal constant driver core: don't trigger uevent after failure extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device sysfs: fail dentry revalidation after namespace change fix sysfs: fail dentry revalidation after namespace change extcon: spelling of detach in function doc extcon: arizona: Stop microphone detection if we give up on it extcon: arizona: Update cable reporting calls and split headset PM / Runtime: Do not increment device usage counts before probing kmsg - do not flush partial lines when the console is busy kmsg - export "continuation record" flag to /dev/kmsg kmsg - avoid warning for CONFIG_PRINTK=n compilations kmsg - properly print over-long continuation lines driver-core: Use kobj_to_dev instead of re-implementing it driver-core: Move kobj_to_dev from genhd.h to device.h driver core: Move deferred devices to the end of dpm_list before probing driver core: move uevent call to driver_register driver core: fix shutdown races with probe/remove(v3) Extcon: Arizona: Add driver for Wolfson Arizona class devices ...
2012-07-26Merge tag 'staging-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree patches from Greg Kroah-Hartman: "Here's the big staging tree merge for the 3.6-rc1 merge window. There are some patches in here outside of drivers/staging/, notibly the iio code (which is still stradeling the staging / not staging boundry), the pstore code, and the tracing code. All of these have gotten acks from the various subsystem maintainers to be included in this tree. The pstore and tracing patches are related, and are coming here as they replace one of the android staging drivers. Otherwise, the normal staging mess. Lots of cleanups and a few new drivers (some iio drivers, and the large csr wireless driver abomination.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up trivial conflicts in drivers/staging/comedi/drivers/s626.h and drivers/staging/gdm72xx/netlink_k.c * tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1108 commits) staging: csr: delete a bunch of unused library functions staging: csr: remove csr_utf16.c staging: csr: remove csr_pmem.h staging: csr: remove CsrPmemAlloc staging: csr: remove CsrPmemFree() staging: csr: remove CsrMemAllocDma() staging: csr: remove CsrMemCalloc() staging: csr: remove CsrMemAlloc() staging: csr: remove CsrMemFree() and CsrMemFreeDma() staging: csr: remove csr_util.h staging: csr: remove CsrOffSetOf() stating: csr: remove unneeded #includes in csr_util.c staging: csr: make CsrUInt16ToHex static staging: csr: remove CsrMemCpy() staging: csr: remove CsrStrLen() staging: csr: remove CsrVsnprintf() staging: csr: remove CsrStrDup staging: csr: remove CsrStrChr() staging: csr: remove CsrStrNCmp staging: csr: remove CsrStrCmp ...
2012-07-26sched: Deliver sched_switch events to the current taskAndrew Vagin
Otherwise they can't be filtered for a defined task: perf record -e sched:sched_switch ./foo This command doesn't report any events without this patch. I think it isn't a security concern if someone knows who will be executed next - this can already be observed by polling /proc state. By default perf is disabled for non-root users in any case. I need these events for profiling sleep times. sched_switch is used for getting callchains and sched_stat_* is used for getting time periods. These events are combined in user space, then it can be analyzed by perf tools. Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arun Sharma <asharma@fb.com> Link: http://lkml.kernel.org/r/1342088069-1005148-1-git-send-email-avagin@openvz.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-25irqdomain: Improve diagnostics when a domain mapping failsMark Brown
When the map operation fails log the error code we get and add a WARN_ON() so we get a backtrace (which should help work out which interrupt is the source of the issue). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-07-25irqdomain: eliminate slow-path revmap lookupsGrant Likely
With the current state of irq_domain, the reverse map is always updated when new IRQs get mapped. This means that the irq_find_mapping() function can be simplified to execute the revmap lookup functions unconditionally This patch adds lookup functions for the revmaps that don't yet have one and removes the slow path lookup code path. v8: Broke out unrelated changes into separate patches. Rebased on Paul's irq association patches. v7: Rebased to irqdomain/next for v3.4 and applied before the removal of 'hint' v6: Remove the slow path entirely. The only place where the slow path could get called is for a linear mapping if the hwirq number is larger than the linear revmap size. There shouldn't be any interrupt controllers that do that. v5: rewrite to not use a ->revmap() callback. It is simpler, smaller, safer and faster to open code each of the revmap lookups directly into irq_find_mapping() via a switch statement. v4: Fix build failure on incorrect variable reference. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Rob Herring <rob.herring@calxeda.com>
2012-07-25Merge remote-tracking branch 'origin' into irqdomain/nextGrant Likely
2012-07-25Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "The most important feature of this patch set is the new async infrastructure that makes sure async_synchronize_full() synchronizes all domains and allows us to remove all the hacks (like having scsi_complete_async_scans() in the device base code) and means that the async infrastructure will "just work" in future. The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi, megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure work in sas and FC. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) [SCSI] Revert "[SCSI] fix async probe regression" [SCSI] cleanup usages of scsi_complete_async_scans [SCSI] queue async scan work to an async_schedule domain [SCSI] async: make async_synchronize_full() flush all work regardless of domain [SCSI] async: introduce 'async_domain' type [SCSI] bfa: Fix to set correct return error codes and misc cleanup. [SCSI] aacraid: Series 7 Async. (performance) mode support [SCSI] aha152x: Allow use on 64bit systems [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning [SCSI] bfa: squelch lockdep complaint with a spin_lock_init [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED [SCSI] ufs: reverse the ufshcd_is_device_present logic [SCSI] ufs: use module_pci_driver [SCSI] usb-storage: update usb devices for write cache quirk in quirk list. [SCSI] usb-storage: add support for write cache quirk [SCSI] set to WCE if usb cache quirk is present. [SCSI] virtio-scsi: hotplug support for virtio-scsi [SCSI] virtio-scsi: split scatterlist per target ...