summaryrefslogtreecommitdiff
path: root/net/ieee802154
AgeCommit message (Collapse)Author
2013-10-086lowpan: Sync default hardware address of lowpan links to their wpanAlan Ott
When a lowpan link to a wpan device is created, set the hardware address of the lowpan link to that of the wpan device. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-086lowpan: Only make 6lowpan links to IEEE802154 devicesAlan Ott
Refuse to create 6lowpan links if the actual hardware interface is of any type other than ARPHRD_IEEE802154. Signed-off-by: Alan Ott <alan@signal11.us> Suggested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-08-206lowpan: handle context based source addressAlexander Aring
Handle context based address when an unspecified address is given. For other context based address we print a warning and drop the packet because we don't support it right now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-206lowpan: lowpan_uncompress_addr with address_modeAlexander Aring
This patch drops the pre and postcount calculation from the lowpan_uncompress_addr function.We use instead a switch/case over address_mode value. The original implementation has several bugs in this function and it was hard to decrypt how it works. To make it maintainable and fix these bugs this patch basically reimplements lowpan_uncompress_addr from scratch. A list of bugs we found in the current implementation: 1) Properly support uncompression of short-address based IPv6 addresses (instead of basically copying garbage) 2) Fix use and uncompression of long-addresses based IPv6 addresses 3) Add missing ff:fe00 in the case of SAM/DAM = 2 and M = 0 Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-206lowpan: add function to uncompress multicast addrAlexander Aring
Add function to uncompress multicast address. This function split the uncompress function for a multicast address in a seperate function. To uncompress a multicast address is different than a other non-multicasts addresses according to rfc6282. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-206lowpan: introduce lowpan_fetch_skb functionAlexander Aring
This patch adds a helper function to parse the ipv6 header to a 6lowpan header in stream. This function checks first if we can pull data with a specific length from a skb. If this seems to be okay, we copy skb data to a destination pointer and run skb_pull. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-206lowpan: Fix fragmentation with link-local compressed addressesDavid Hauweele
When a new 6lowpan fragment is received, a skbuff is allocated for the reassembled packet. However when a 6lowpan packet compresses link-local addresses based on link-layer addresses, the processing function relies on the skb mac control block to find the related link-layer address. This patch copies the control block from the first fragment into the newly allocated skb to keep a trace of the link-layer addresses in case of a link-local compressed address. Edit: small changes on comment issue Signed-off-by: David Hauweele <david@hauweele.net> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-206lowpan: init ipv6hdr buffer to zeroAlexander Aring
This patch simplify the handling to set fields inside of struct ipv6hdr to zero. Instead of setting some memory regions with memset to zero we initialize the whole ipv6hdr to zero. This is a simplification for parsing the 6lowpan header for the upcomming patches. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-27net: ieee802154: convert class code to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the ieee802154 class code to use the correct field. Acked-by: David S. Miller <davem@davemloft.net> Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-28net: pass info struct via netdevice notifierJiri Pirko
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08ieee802154/nl-mac.c: make some MLME operations optionalWerner Almesberger
Check for NULL before calling the following operations from "struct ieee802154_mlme_ops": assoc_req, assoc_resp, disassoc_req, start_req, and scan_req. This fixes a current oops where those functions are called but not implemented. It also updates the documentation to clarify that they are now optional by design. If a call to an unimplemented function is attempted, the kernel returns EOPNOTSUPP via netlink. The following operations are still required: get_phy, get_pan_id, get_short_addr, and get_dsn. Note that the places where this patch changes the initialization of "ret" should not affect the rest of the code since "ret" was always set (again) before returning its value. Signed-off-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-076lowpan: handle dev_queue_xmit() error code properlyAlan Ott
dev_queue_xmit() will return a positive value if the packet could not be queued, often because the real network device (in our case the mac802154 wpan device) has its queue stopped. lowpan_xmit() should handle the positive return code (for the debug statement) and return that value to the higher layer so the higher layer will retry sending the packet. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29netlink: fix the warning introduced by netlink API replacementHong zhi guo
Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28net-next: replace obsolete NLMSG_* with type safe nlmsg_*Hong zhi guo
Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-276lowpan: use IEEE802154_ADDR_LEN instead of a magic numberTony Cheneau
Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-276lowpan: fix a small formatting issueTony Cheneau
This formatting issue was introduced with commit d4ac32365dcbfd341a87eae444c26679f889249a Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27ieee802154/dgram: Pass source address in dgram_recvmsgStephen Röttger
This patch lets dgram_recvmsg fill in the sockaddr struct in msg->msg_name with the source address of the packet. This is used by the userland functions recvmsg and recvfrom to get the senders address. [Stefan: Changed from old zigbee legacy tree to mainline] Signed-off-by: Stephen Röttger <stephen.roettger@zero-entropy.de> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: modify udp compression/uncompression to match the standardTony Cheneau
The previous code would just compress the UDP header and send the compressed UDP header along with the uncompressed one. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: use the PANID provided by the device instead of a static valueTony Cheneau
Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: obtain IEEE802.15.4 sequence number from the MAC layerTony Cheneau
Sets the sequence number in the frame format. Without this fix, the sequence number is always set to 0. This makes trafic analysis very hard. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: store fragment tag values per device instead of net stack wideTony Cheneau
Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: add debug messages for 6LoWPAN fragmentationTony Cheneau
Add pr_debug() call in order to debug 6LoWPAN fragmentation and reassembly. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: fix first fragment (FRAG1) handlingTony Cheneau
The first fragment, FRAG1, must contain some payload according to the specs. However, as it is currently written, the first fragment will remain empty and only contain the 6lowpan headers. This patch also extracts the transport layer information from the first fragment. This information is used later on when uncompressing UDP header. Thanks to Wolf-Bastian Pöttner for noticing that the offset value was not properly initialized. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: use short IEEE 802.15.4 addresses for broadcast destinationTony Cheneau
The IEEE 802.15.4 standard uses the 0xFFFF short address (2 bytes) for message broadcasting. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: always enable link-layer acknowledgmentsTony Cheneau
This feature is especially important when using fragmentation, because the reassembly mechanism cannot recover from the loss of a fragment. Note that some hardware ignore this flag and not will not transmit acknowledgments even if this is set. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: next header is not properly set upon decompression of a UDP header.Tony Cheneau
This causes a drop of the UDP packet. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-266lowpan: lowpan_is_iid_16_bit_compressable() does not detect compressible ↵Tony Cheneau
address correctly The current test is not RFC6282 compliant. The same issue has been found and fixed in Contiki. This patch is basically a port of their fix. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-106lowpan: Fix endianness issue in is_addr_link_local().YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-28hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-066lowpan: use stack buffer instead of heapAlexander Aring
head buffer is only temporary available in lowpan_header_create. So it's not necessary to put it on the heap. Also fixed a comment codestyle issue. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-066lowpan: Remove __init tag from lowpan_netlink_fini().David S. Miller
It's called from both __init and __exit code, so neither tag is appropriate. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06driver-core: constify data for class_find_device()Michał Mirosław
All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-186lowpan: Handle uncompressed IPv6 packets over 6LoWPANAlan Ott
Handle the reception of uncompressed packets (dispatch type = IPv6). Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-186lowpan: Refactor packet delivery into a functionAlan Ott
Refactor the handing of the skb's to the individual lowpan devices into a function. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11net/ieee802154: remove depends on CONFIG_EXPERIMENTALKees Cook
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net>
2012-11-306lowpan: consider checksum bytes in fragmentation thresholdAlan Ott
Change the threshold for framentation of a lowpan packet from using the MTU size to now use the MTU size minus the checksum length, which is added by the hardware. For IEEE 802.15.4, this effectively changes it from 127 bytes to 125 bytes. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-18net/ieee802154/6lowpan.c: Remove unecessary semicolonPeter Senna Tschudin
Found by http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10netlink: Rename pid to portid to avoid confusionEric W. Biederman
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-026lowpan: handle NETDEV_UNREGISTER eventAlan Ott
Before, it was impossible to remove a wpan device which had lowpan attached to it. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-09-026lowpan: Make a copy of skb's delivered to 6lowpanAlan Ott
Since lowpan_process_data() modifies the skb (by calling skb_pull()), we need our own copy so that it doesn't affect the data received by other protcols (in this case, af_ieee802154). Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-07-176lowpan: Change byte order when storing/accessing to len fieldTony Cheneau
Lenght field should be encoded using big endian byte order, such as intend in the specs. As it is currently written, the len field would not be decoded properly on an implementation using the correct byte ordering. Hence, it could lead to interroperability issues. Also, I rewrote the code so that iphc0 argument of lowpan_alloc_new_frame could be removed. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-176lowpan: Change byte order when storing/accessing u16 tagTony Cheneau
The tag field should be stored and accessed using big endian byte order (as intended in the specs). Or else, when displayed with a trafic analyser, such a Wireshark, the field not properly displayed (e.g. 0x01 00 instead of 0x00 01, and so on). Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-176lowpan: Fix null pointer dereference in UDP uncompression functionTony Cheneau
When a UDP packet gets fragmented, a crash will occur at reassembly time. This is because skb->transport_header is not set during earlier period of fragment reassembly. As a consequence, call to udp_hdr() return NULL and uh (which is NULL) gets dereferenced without much test. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-126lowpan: rework fragment-deleting routinealex.bluesman.smirnov@gmail.com
6lowpan module starts collecting incomming frames and fragments right after lowpan_module_init() therefor it will be better to clean unfinished fragments in lowpan_cleanup_module() function instead of doing it when link goes down. Changed spinlocks type to prevent deadlock with expired timer event and removed unused one. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-126lowpan: fix tag variable sizealex.bluesman.smirnov@gmail.com
Function lowpan_alloc_new_frame() takes u8 tag as an argument. However, its only caller, lowpan_process_data() passes down a u16. Hence, the tag value can get corrupted. This prevent 6lowpan fragment reassembly of a message when the fragment tag value is over 256. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-126lowpan: get extra headroom in allocated framealex.bluesman.smirnov@gmail.com
Use netdev_alloc_skb_ip_align() instead of alloc_skb() to get some extra headroom in case we need to forward this frame in a tunnel or something else. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-126lowpan: revert: add missing spin_lock_init()alex.bluesman.smirnov@gmail.com
Revert the commit 768f7c7c121e80f458a9d013b2e8b169e5dfb1e5 to initialize spinlock in the more preferable way and make it static to avoid sparse warning. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/batman-adv/bridge_loop_avoidance.c net/batman-adv/bridge_loop_avoidance.h net/batman-adv/soft-interface.c net/mac80211/mlme.c With merge help from Antonio Quartulli (batman-adv) and Stephen Rothwell (drivers/net/usb/qmi_wwan.c). The net/mac80211/mlme.c conflict seemed easy enough, accounting for a conversion to some new tracing macros. Signed-off-by: David S. Miller <davem@davemloft.net>